F02.s.alicdn.com



???????? ??????/??????/?????Qty.13GASOLINE AUGER DRILL2SPECIFICATIONSIt is GASOLINE AUGER DRILL with the following:-Gas powered auger drill should be 1-1/2 hp(or better) The drive shaft should be 7/8" (approx.)The spin should be at 150 rpm(approx)Should be supplied with a 30-3/4" auger bit . (approx.)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.14SOIL CORE SAMPLER8SPECIFICATIONSIt is Soil Core Sampler with the following:-Soil Core Sampler used to collect virtually undisturbed soil core samples for soil profiling and environmental investigations.10 inch Galvanized Steel Soil Sampler has a saw-toothed cutting edge tapered for easy core removalShould take a one-inch core sample to a depth of 10 inches (or better)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.23FLOOR DRILL4SPECIFICATIONSIt is a floor drill with the following specifications:-Motor power 400 watts (approx.)Spindle is 2 MT (or equivalent)Chuck is 0-13mm Jacobs (approx.)Drive type belt and stepped pulleys (or equivalent)Spindle speed (480 rpm - 820 rpm – 1390 rpm – 2300 rpm) (approx.)Spindle travel 110 mm (approx.)Throat depth 180 mm (approx.)Column diameter 75 mm (approx.)Table working surface 225 mm in depth and 235 mm in width (approx.)Table slot 15 mm in width and 253 mm in centre (approx.)Base working surface should be 215 mm in depth and 253 mm in width (approx.)Base slot width 13 mm and 170 mm in centre (approx.)Overall height 1600 mm (approx.)Overall width 345 mm (approx.)Overall depth 670 mm (approx.)Approximate weight 100 kgsShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.24HEAVY DUTY BANDSAW2SPECIFICATIONSIt is heavy duty bandsaw with the following specifications:-Should be fitted with foot stop switch, key switch, motor brake and ceramic guidesDepth of cut 400 mm (approx.)Throat depth 580 mm (approx.)Table size 600 mm x 830 mm (approx.)Table tilt between 0? to 20? Blade length 4570 mm (approx.)Should accommodate minimum blade width 6mm to maximum blade width 35 mm (approx.)Dust extraction port Motor wattage (2000-2300)watts (approx.)Overall dimension (HxWxD) (2000x1000x790)mm (approx.)Weight 280-300 kgs (approx.)Should be supplied with 3 sets of spare blades (different sizes)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.25PRECISION TABLE SAW2SPECIFICATIONSIt is high quality precision table saw with the following specifications:-Should have two separate handwheels that operate the rise, fall and tilting action of the sawtable - cutting depth 110mm (approx.)Maximum cutting capacity 1400 mm x 1100 mm (approx.) with the addition of sliding table carriage & table width extensionShould include footstop & keyswitch as standardTable size 800 mm x 680 mm (approx.)Table height 850 mm (approx.)Spindle speed 4000 rpm (approx.)Saw tilt max. 0 - 45? (approx.)Saw blade diameter 315 mm with 48 teeth (approx.)Cutting speed (60-65) m/sec. (approx.) Rip fence length 800 mm (approx.)Angle fence 2x60? (approx.)Suction connector should be includedOutput 2200 watts (approx.)Overall dimensions should be 1110 mm in height, 760 mm in width & 1350 mm in depth (approx.)weight is 215 kg (approx.)Should be supplied with 3 sets of bladesShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.26SLAB ROLLER 2SPECIFICATIONSIt is a slab roller with the following specifications:-Table model with legsShould be able to produce clay slabs of any thicknessShould be provided with two dust free aluminum rollers with heavy moulded end capsShould be supplied with additional nylon cup in the centre of the large roller for strengthRoller should always stays parallel to table (150mm) (approx.)Strong legs for stabilityDimensions 100w x 70H x 120L cm (approx.)Roll diameter 10 cm (approx.)Slab thickness (3-50 mm) (approx.)Table size 60L x 120w cm (approx.) Weight 50 kg (approx.)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.???????? ??????/??????/?????Qty.27MEDIUM DUTY PLANNER THICKNESSER2SPECIFICATIONSIt is a medium duty planner thicknesser with the following specifications:-Made from large cast iron tilting fence (or equivalent) for accuracy & timber supportShould have front rear cutterblock guards, shaw guards for rebating Should have starter, key switch, foot switch and anti kick back fingersSurface capacity 255 mm (approx.)Thicknessing width 255 mm (approx.)Thicknessing depth 180 mm (approx.)Rebating depth 13 mm (approx.)Surface table length 1200 mm (approx.)Surface table height 830 mm (approx.)Feed table length 600 mm (approx.)Cutterblock diameter 80 mm (approx.)Feed roller diameter 40 mm (approx.)Fence size 550x90 mm (approx.)Feed Speed 5.5 m/min (approx.)Dust extraction port Output motor wattage 1.5 kw (approx.)Base dimensions 480 mm in width and 380 in depth (approx.)Overall dimensions are 1400 mm in height, 800 mm in width and 1160 mm in depth (all dimensions approx.)Weight 175 kg (approx.)Should be supplied with 3 sets of knives Should be supplied with all accessoriesShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.28PUGMILL MIXER2SPECIFICATIONSIt is de-airing pugmill mixer with the following specifications:-Should be made from stainless steel (or equivalent) with hopper and nozzle Should be supplied with clay cutter and roller shelfShould provide dual safety system which includes a limit switch and overload systemMotor 1 HP (approx.) or betterMax batch capacity 55 Lbs (approx.)Extruding capacity 730 Lbs (approx.)Hopper size (8.5 x 11.5) inches (approx.)Air vacuum pump systemShould include clay cutter and roller shelfShould be easily accessible to mountain and cleanNozzle diameter 3.5" (approx.)Weight 310 Lbs (approx.)Should be supplied with complete set of pugmill extruding dies made of stainless steel or equivalent Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.29POTTERS WHEEL10SPECIFICATIONSIt is a double drive potters wheel with the following specifications:-For shaping and forming of ceramic waresShould come with adjustable legs that can be used as a table top wheelShould come with remote foot-pedalDirect driveSpeed should be controlled by foot pedalMotor power 1/2 HP (approx.)/0-25 rpm (approx.)Should be supplied with 2 piece splash panForward and reverse switchWheelhead diameter 35 cm (approx.)Clay capacity 30 kg (approx.)Dimensions (L x H x W) (60 x 70 x 57 cm) (approx.)Motor should be protected from overload built-in breakerShould allow optimum speed under all load conditionsShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.30SPRAY BOOTH2SPECIFICATIONSIt is a wet back spray booth with the following specifications:-Should use water curtain at booth rear to capture solid particlesShould have washable stainless steel filter followed by a washable filter bagShould have a synthetic filter bag fitted over the fan exhaustShould be provided with steel support frame with 4 lockable castorsMotor power 1/3 HP (approx.)Dimensions - 820 mm (W), 150 mm (ht) & 1290m (D) (approx.)Internal dimension 640 mm (W), 625 mm (ht) & 420 mm (depth) (approx.)Weight 118 kg (approx.)Should be supplied with spare filter where ever applicableShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.31COMPRESSOR WITH SPRAY GUN4SPECIFICATIONSIt is compressor with the following specifications:-Output should be 60-62 LTS/min (approx.)Suitable for air brushes as wellDiaphragm compressor or equivalent technologyMaximum pressure 50 psi (approx.)Should provide suction type spray gun with 1 litre cup capacity & 0.5 mm round nozzleAir hose 2.5 m (approx.)Compressor dimensions 235 mm (L) x 130 mm (W) x 225 mm (H) (all are approx.)Weight 10 kg (approx.)Should be supplied with hoses complete set where ever applicable Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.32DELTA SANDER (OSCILLATING MOTION)25SPECIFICATIONSIt is a delta housing with the following specifications:-Made from glass fibre re-inforced polyamide or equivalent materialSanding area around (65x65x65) mm (approx.)Suitable for grinding surfaces in tight spots, corners, sides & in-accessible areasOscillating motion Should also be capable of cuttingVariable speed facilityAdjustable sanding frequencyTurning angle 120? (approx.)100 w power (approx.)Sanding frequency around 3000-10.000 rpm (approx.)Length 230 mm (approx.)Weight 550 g (approx.) Should be supplied with the following sanding discs:-80 grit – 4 Ea 150 grit – 4 Ea 240 grit – 4 EaHSS segment cutting blade – 4 EaSanding fleece – 4 EaSoft polishing fleece – 4 EaHard polishing fleece – 4 EaStorage case Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.34BENCH TYPE CIRCULAR SAW6SPECIFICATIONSIt is a bench type circular saw suitable for cutting wood, non-ferrous metal, plastics. Should have the following specifications:-85-100 watts power, motor operationDimension (240 x 180 x 80)mm (approx.)Weight (1.8 – 2.2) kgs (approx.)Power transmission by toothed belt via ball bearing (2-stage torque) (approx.) or equivalent mechanism5000 rpm (approx.)Capable of right blade speed for a particular cutting operationCutting capability for wood up to 8 mm (approx.)Cutting capability for plastics up to 3 mm (approx.)Cutting capability for non-ferrous metals up to - 1.5 mm (approx.)Adjustable mitre fence with scale Angle stop with degree graduationFlat aluminum work top (160 x 160) mm (approx.) or equivalentShould be provided with saw dust access door (for easy cleaning)Following blades should be providedBlades for (hard & soft wood) (58 mm dia & 80 teeth) (approx.) – 4 EaCarbide blades for cutting fiber glass, non-ferrous metals up to 3 mm thick, 50 mm dia (approx.), fine toothed, 10 mm bore (approx.) – 4 EaDiamond blades, 50 mm dia (approx.), (10 mm bore) (approx.) for cutting ceramics, porcelain files & stones – 4 EaAlloy blades, 50 mm dia (approx.), (10 mm bore) (approx.), fine toothed suitable for cutting aluminum, brass & copper – 4 EaShould be supplied with suitable tableShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.35DISC SANDER10SPECIFICATIONSIt is disc sander with the following specifications:-Should be suitable for sanding, polishing, beveling, de-burring of hard & soft wood, non-ferrous metal, steel, plastic Capable of sanding long edges, end sections, radii, mitersDC motor or equivalentShould be provided with aluminum work table or equivalentWork table capable of tilling (50? inward)/10? outward) (approx.)Discs should be easily mountableA slot in the table should act as mitre guideThe unit could be mounted horizontally & vertically to a table or workbenchShould be supplied with suitable table or workbenchGraduated mitre guide (0-90?) (approx.) for angle cutsShould have integrated suction device for connecting to a vaccumShould be supplied with the following 2 Ea sanding discs:80 grit150 grit240 gritPower 140 W (approx.)Variable speed (1150-3600) rpm (approx.)Disc diameter 125 mm (approx.)Worktable size (98 x 140) mm (approx.)Sanding height 63 mm (approx.)Overall size (300 x 140 x 160) mm (approx.)Weight 3 kg (approx.)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard)???????? ??????/??????/?????Qty.36MOTOR – DRIVEN CARVING DEVICE50SPECIFICATIONSIt is motor driven carving with the following specifications:-Should be provided with three knife inserts made from bimetal (U-form, V-form & flat blade)Should curve all types of wood, restore furniture, restore antiques Gear head should be made of die-cast aluminum or similarMain house should be made of glass-fiber reinforced polyamide or similarMotor power 50 W (approx.)Stroke speed 10,000 rpm (approx.)Length 230 mm (approx.)Weight 680 g (approx.)Should be supplied with the following accessories:Replacement carving blades – (3 sets) of each shape of the followingShould be supplied with storage caseV-shape large V-shape small Rounded Flat - straight cornerFlat - round cornerMultiform grindstone for carving blades – (3 sets)Insertion tools with carbide burrs for model making, cleaning & smoothing of wood & glass fiber:Cone 8 mm x 12 mm (approx.) – (3 sets)Cylinder round head 7.5 mm x 12 mm (approx.) – (3 sets)Taper 4 mm x 19 mm (approx.) – (3 sets)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard)???????? ??????/??????/?????Qty.37WOOD LATHE 4SPECIFICATIONSIt is wood lathe with the following specifications:-Cast iron construction or equivalentPlain & polished turning bed Should have spindle stock, tail stock and tool rest of cast iron or equivalentWith eccentric clamp for tail stock4 point drive centre (approx.)Spindle speeds - 10 (approx.)Clock wise & anti clock wise rotationShould have key switch and foot switchDistance between centres 1095 mm (approx.)Centre height 180 mm (approx.)Truning diameter over bed 355 mm (approx.)Speeds – 500 to 2000 rpm (approx.)Spindle thread 1M33 x 3.5 (approx.)Taper head & tail stock 2MTMotor 0.60 kw (approx.)Overall dimension 1055 x 1575 x 370 mm (approx.)Weight 90-100 kgs (approx.)Should be supplied with complete set of tools & accessoriesRevolving centreShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.41LONG NECK ANGLE GRINDER12SPECIFICATIONSIt is a long neck angle grinder for working steel, non-ferrous metals, glass, ceramics, wood & plasticsThe above should be capable of doing the job of cutting, rough machining, grinding, precision polishing, fine polishing and carving woodmotor operation (DC or equivalent)Head made of glass fiber re-in-forced polymide or equivalent materialShould be supplied with storage caseTechnical dataPower 100 w (approx.)Speed 13000 rpm (approx.)Disc dia. 50 mm (approx.)Length 270 mm (approx.)Weight 550 gms (approx.)Should be supplied with the following discsCorundum grinding disc (?50mm approx.), 60 grits (approx.) - 4 EaFor de-burring, grinding, sharpening derusting of steel and for non-ferrous materialSilicon carbide grinding discs (?50mm approx.), 60 grits - 4 EaCorundum for sander (?50mm approx.), 100 grits - 4 Ea for grinding tempered iron, steel and non-ferrous metals Corundum bound cutting disc (?50mm approx.)- 4 Ea for cutting steel, non-ferrous metalsRasp plate with metal burrs – 4 EaFor model making, cleaning and smoothing of wood, plastics and glass fibers re-inforced materialsShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.42COMPACT DRILLING MACHINE25SPECIFICATIONSIt is a compact drilling machine with the following specifications:-DC motor operation or equivalentShould be provided with quiet planetary gearbox of die-cast aluminum or equivalentMain housing made of glass-fiber reinforced polyamide or equivalentShould be supplied with handy switch with integrated electronic speed control and lockShould be supplied with chuckShould be supplied storage casePower 100 w (approx.)Speed 3000 rpm (approx.)Chuck capacity 0.5 – 8 mm (approx.)Should supplied with complete set of drill bits (various size) for steel, wood, plastic, etc.Steel capacity up to 5 mm (approx.)Length 225 mm (approx.)Weight 900 gms (approx.)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard). ???????? ??????/??????/?????Qty.43JIG SAW20SPECIFICATIONSIt is jig saw with the following specifications:-Should be suitable for precise cutting Should be provided with a stable head of die-cast zinc or equivalentShould be provided with housing head made of glass-fiber reinforced polymide or equivalentShould be supplied with balanced, low noise DC motor or equivalentFoot plate should be adjustable up to 45? (approx.) for mitre cuts Should be ideal for tight-curves in wood (up to 12 mm) (approx.), PC cards up to 5 mm (approx.) and non-ferrous metals up to 3 mm (approx.)Should be supplied with 4 sets super-cut-sawing blades of various piches for wood, plastic and metalShould be supplied with storage casePower 100 w (approx.)Speed 2000-4500/min (approx.)Length 230 mm (approx.)Weight 700 g (approx.)Jig saw blades made of steel pitch 1.5 mm for hard and soft woods, plywood, soft plastics pack of 2Jig saw blades made of HSS pitch 1.06 mm (approx.) for metals, aluminum, fiber glass, plexiglass, softer alloys pack of 2Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.44MICRO MILLER6SPECIFICATIONSIt is micro miller for milling drilling and counter sinking Accuracy 0.05 mm (approx.)Milling head pivoted 360? with degree graduationVariable pre set speedsSleeve feed using drilling lever with scale ringWork piece fixing by using chucks of sizes 6-8-10-12 mm (approx.)Height adjustment using hand wheel graduated (scale ring)Plane milled compound table in steel with 3 T-slotsSolid column with dove tailed slide wayThe unit should come with splash guard and chip collecting trayTechnical data requirement Spindle speed: variable from 180 to 2500 rpm (approx.)Power: 400 to 500 watts (approx.)Table size: 400 x 125 mm (approx.)Column: 120 x 100 x 420 m (approx.)Extension to spindle centre: 100 mm (approx.)Travers range: Z axis vertical 220 mm (approx.)X axis transverse 310 mm (approx.)Y axis depth 100 mm (approx.)Overall height: 800 mm (approx.)Approximate weight: 40-50 kgsEach micro miller should be supplied complete with the following accessory that could be fixed and removed from the micro miller as per requirement:-Engraving device – 1 setThe engraving device should be easily mountable and removable from the main unit (micro miller)It should have the following specificationsShould engrave letters and numbers in metal or plasticShould be supplied with 2 sets of letters from q to z, full stop and hyphen other relevant charactersShould be provide with 2 sets of numerals from 0 to 9Should also engrave and cut freely selectable shapes using self-made templatesPrecise letters templates fixed in the guide railsWork piece should be aligned and fixed on movable guide block using jaws and viceThree piece centre drill set: 1 setMilling cutters set (2-5mm) 1 setMilling cutters set (6-10mm) 1 setPrecision v-blocks 1 setFine feed for accurate adjustments 1 setShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.45MICRO BAND SAW10SPECIFICATIONSIt is a micro band saw with the following specifications:-Suitable for steel, non-ferrous metals, wood and plasticSolid aluminum housing or equivalentPlain milled table with slot for mitre gaugeTilting angle 45?Should come with blade guide Adjustable in height & width for different sizes of saw blades Speed controlBlade size 5 x 0.4 mm (approx.)Blade speed 180 to 330 m/min (approx.)Throat 150 mm (approx.)Max. height 80 mm (approx.)Table 200 x 200 mm (approx.)Should be supplied with complete set of blades for different materialsShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.47CUT OFF/MITRE SAW10SPECIFICATIONSIt is cut off/mitre saw with the following specifications:-Quiet DC motor or equivalentShould be provided with smooth toothed belt drive to ensures power transmission (or equivalent technology)Should be suitable for non-ferrous metal, wood and plastics Power 200 w (approx.)Speed 6000 rpm (approx.)Should have a round table of highly stable die-cast aluminum with CNC-milled fittings and slides (or equivalent )Round table rotate 45? left and right with positive stops at 15? (approx.)Lateral movement of saw headAdjustable fence 300 mm (approx.)Should come with hand gripShould come with switch and saw head release buttonIntegrated clamping system with fixed jaws & v slot for round workpieceShould supplied with complete set of saw blades for different materialsTable size 230 x 230 mm (approx.)Weight 6 kg (approx.)Should be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.48SCROLL SAW10SPECIFICATIONSIt is scroll saw for precision mechanics, model building, toys, puzzles etc…Suitable for students trainingSwinging saw blade holderCapable to hold blades with pin heads & with out pin heads Dust blowersTable tilt 45? with scaleShould have detachable blade guardBase made of cast iron or equivalent with rubberized bottomTable made of aluminum or equivalentTool storage compartmentOn-off switchShould be supplied with scroll pin saw blades 5 x 10 Tpi & 5 x 25 TpiVacilty to vacuum the dust Power 200 w (approx.)Speed 200 -1400 stockes/min (approx.)Stroke length 3/4" (approx.)Throat 16" (approx.)Cutting depth – 2 " @ 90? (approx.)1" @ 45? (approx.)Overall dimension (approx.) 21" (L) x 11"(W) x 12"(H) (approx.)Weight 20 kgs (approx.)Should be supplied with complete set of blades for different materialsShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.49PROFESSIONAL ETCHING PRESS2SPECIFICATIONSIt is etching press for chalcographic print with the following specifications:-Should be made of solid steel Solid steel mounted on oscillating ball bearings and height adjustable or similar technologyEquipment capable of applying pressure to ensure flexibility of printing Wheel with reducer 1:3 (approx.), supplied with metal plateSize 70 x 82 x 44 H cm (approx.)Weight 318 g (approx.)Width of roller 72 cm (approx.)Diameter of lower roller 14 cm (approx.)Diameter of upper roller 16 cm (approx.)Diameter of wheel 85 cm (approx.)Metal plate 72 x 125 x 0.5 cm (approx.)Should be supplied with all accessories like felt, plates for etching in different materials (thickness 1 mm) & synthetic plateShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard).???????? ??????/??????/?????Qty.53TABLE SAW10SPECIFICATIONSIt is a table saw with the following specifications:-Table should be extendable with integrated auxiliary stopShould be able to opened normally via side flap or equivalent mechanismElectronic speed control 4400-6800 rpm (approx.)Total power – 200 watts (approx.)Mitre infinitely adjustable up to 45?Suitable for saw blades between 50 to 85 mm with 10 mm centre hole (approx.)Weight 7 kg (approx.)Should be able to be used for cutting wood, non-ferrous metals, plastics, dlexiglas, glass fiber reinforced sheets, foam and other materialsShould be able to do corrections after course adjustment using an adjusting screw for equivalent mechanismDC motor or equivalentOver all dimension 300(W) x 320(D)x 170(H) mm (approx.)Table size 300 x 300 mm (approx.)Cutting depth 1-22 mm (approx.)Should comes with the following accessories:-T-slot milling device: - 2 setShould be consist of milling protection and tungsten tipped saw blade (50 x 2 x 10 mm) (approx.)max depth 8 mm (approx.) super cut (? 85 x 0.5 x 10 mm (approx.)) - 2 set80 teeth (approx.)Use on hard and soft woods, plastics Tungsten carbide tipped (? 80 x 1.5 x 10 mm (approx.) - 2 set36 teeth (approx.)Use to cut balsa, plywood, hard and soft woods, polycarbonate, plastic, aluminum and PC cards Tungsten carbide tipped (? 80 x 1.5 x 10 mm (approx.) - 2 set24 teeth (approx.)Use on aluminum, hardwood, laminates, plastics Diamond coated (? 85 x 0.7 x 10 mm (approx.) - 2 setUse on stone and tiles SPECIFICATIONSShould be provided with all needed operational or workshop manuals (teacher) & experimental manuals (students), where ever applicable from the manufacturer.Should be provided with all operational accessories & connections (cables...etc.) for the installation to be complete 100%.Should be provided with dust cover, where ever appropriate.Equipment should have an over all guarantee for 2 years (from the date of installation & training.The tendered should be capable of providing all necessary spare parts needed for maintenance, for at least 5 years.The voltage 240 V, 50/60 HZ (where ever applicable). (Kuwait MEW standard). ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download