INSTALLATION MANUAL FOR SR-1000 STANDALONE INTEGRATED ...

[Pages:42]INSTALLATION MANUAL FOR SR-1000 STANDALONE INTEGRATED MEDIA BLOCKTM

Version 17.0 September 25th, 2019

TABLE OF CONTENTS

TABLE OF CONTENTS

1 INTRODUCTION............................................................................................6

1.1 Equipment List .......................................................................................................... 7

2 INSTALLING SR-1000 INTO THE PROJECTOR..........................................8

2.1 Remove existing interface board/placeholders from the projector ........................... 9 2.1.1 Barco Projector Placement .............................................................................. 9 2.1.2 Christie Projector Placement ......................................................................... 10 2.1.3 NEC Projector Placement .............................................................................. 10

2.2 Installing the SR-1000 into the projector ................................................................ 11 2.3 Projector Network ................................................................................................... 11

3 CONNECTING PORTABLE STORAGE/ENTERPRISE STORAGE WITH THE SR-1000 .....................................................................................................12

3.1 Connecting the Portable Storage............................................................................ 12 3.2 Connecting the Enterprise Storage ........................................................................ 13

4 SR-1000 WEBUI ACCESS ..........................................................................14 5 SR-1000 IP ADDRESS SETUP ...................................................................15

5.1 IMB Network Setup ................................................................................................. 15

6 STORAGE CONFIGURATION ....................................................................17 7 SERIES 2 PROJECTOR SETUP.................................................................19

7.1 IMB Marriage and Clearing the Service Door Tamper from the SR-1000.............. 19 7.2 Barco Series 2 Projector Setup .............................................................................. 20 7.3 NEC Series 2 Projector........................................................................................... 21 7.4 Christie Series 2 Projector ...................................................................................... 22 7.5 3D settings for Series 2 projectors.......................................................................... 24

8 TIME ZONE SETUP.....................................................................................25 9 CONTENT INGEST MANAGEMENT SETUP..............................................26

9.1 Content ingest from USB disk................................................................................. 26 9.2 Content ingest from FTP......................................................................................... 27

10 AUDIO SETUP.............................................................................................28 11 SUBTITLES .................................................................................................30 12 AUTOMATION SETUP ................................................................................31

12.1 Automation setup for server GPIO.......................................................................... 31 12.2 Automation setup for projectors.............................................................................. 32

Installation Manual for SR-1000 Standalone Integrated Media BlockTM

-1 -

May 15th, 2019

TABLE OF CONTENTS

12.3 Automation setup for eCNA devices....................................................................... 33 12.4 Automation setup for JNIOR devices ..................................................................... 34 12.5 Automation setup for Christie ACT devices ............................................................ 35 12.6 Automation setup for Dolby devices ....................................................................... 36 12.7 Automation setup for USL DAX devices ................................................................. 37 12.8 Automation setup for USL JSD devices ................................................................. 38

13 COMPONENT ENGINNERING TA-10 SETUP............................................39 14 TESTING PROCEDURES FOR QC AFTER INSTALLATION ....................39 15 APPENDIX...................................................................................................40

15.1 AES Audio and GPIO Pinout .................................................................................. 40 15.2 GPIO Power Details................................................................................................ 40

Installation Manual for SR-1000 Standalone Integrated Media BlockTM

-2 -

May 15th, 2019

Thank you for purchasing a GDC SR-1000 Standalone Integrated Media BlockTM from GDC Technology Limited.

To ensure proper operation and to maximize value of the SR-1000, please review this Installation Manual. It will guide you through all the features and benefits of the new SR-1000 Standalone Integrated Media BlockTM.

COPYRIGHT NOTICE

Copyright ? 2019 by GDC Technology Limited All rights reserved. No part of this manual may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in a form or by any means, electronic, mechanical, photocopying, recording, magnetic, optical, manual or otherwise, or disclosed to third parties without prior written permission of GDC Technology Limited.

MANUAL DISCLAIMER

This manual is made with version 17.0 and there might be slight differences depending on the software version the IMB is running. The contents, features and specifications stated in this manual are subject to change without notice due to continuous product development and improvements. In no other event shall GDC Technology Limited be liable for any loss of profit or any other commercial damages, including but not limited to special, consequential, or other damages.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Installation Manual for SR-1000 Standalone Integrated Media BlockTM

-3 -

May 15th, 2019

CONTACTS AND OFFICES

CONTACTS AND OFFICES

Website: gdc- Email: info@gdc-

24/7 Engineering Support Hotline:

North America Europe

+1 877 743 2872 (Toll Free) +34 928 912 295

North Asia

+852 3520 0920

South East Asia

+65 6100 4328

Latin America China India Australia/ New Zealand

+52 55 8851 1198 +86 400 886 0966 (Toll Free) +91 022 4044 0500 +61 407 040 744

Hong Kong (Headquarters)

China (Beijing)

China (Shenzhen)

Spain (Barcelona)

Unit 1-7, 20th Floor, Kodak House II, 39 Healthy Street East, North Point, Hong Kong

Tel: +852 2507 9555

Rm. 609-618, Office Building, 20# Xinde Street, Xicheng District, Beijing, P.R. China 100088

Tel: +86 10 6205 7040

Room A701, 7/F, Languang Technology Building, No.7 Xinxi Road, North Zone, HighTech Park, Nanshan District, Shenzhen, China.

C/ Esteve Terradas, n? 27, esc. D, Despacho 1 08023 Barcelona, Spain

Tel: +34 93 159 51 75

Tel: +86 755 8608 6000

Peru (Lima)

USA (Los Angeles)

Brazil (S?o Paulo) Singapore

Calle Manuel Miota 170, Miraflores Lima 18, Peru

Tel: +51 1 340 5146

1016 West Magnolia Boulevard Burbank, CA 91506, USA

Tel: +1 818 972 4370 / +1 877 743 2872 (Toll Free)

Av. Ant?nio Carlos Comitre, 540, 3? andar, Conjunto 31, Campolim, Sorocaba / S?o Paulo, CEP 18047-620, Brasil

Tel: +55 15 33269301

10 Ubi Crescent, Ubi Tech Park, Lobby B, #06-25 Singapore 408564.

Tel: +65 6222 1082

Installation Manual for SR-1000 Standalone Integrated Media BlockTM

-4 -

May 15th, 2019

CONTACTS AND OFFICES

Indonesia (Jakarta)

Japan (Tokyo)

India (Mumbai)

Mexico (Mexico City)

Total Building Lantai 4 Suite 0401, Jl. Letjen S. Parman Kav. 106A, Kel Tomang, Kec. Grogol Petamburan, Jakarta Barat 11440, Indonesia

Tel: +62 21 2920 4691

3F, Kyobashi-Chuo Bldg, 1-14-7 Kyobashi Chuo-ku Tokyo 104-0031, Japan

Tel: +81 3 5524 2607

B-207/208, Everest Chambers, Andheri Kurla Road, Marol, Andheri (East), Mumbai-400 059, India

Tel: +91 22 4044 0500

United Arab Emirates (Dubai)

Republic of Korea (Seoul)

S. de R.L. de C.V., Av. Del penon 411 esq. Ote 168, Col. Moctezuma 2 ? Secci?n, Venustiano Carranza, Distrito Federal, C.P. 01210 Mexico

Tel: +52 55 8526 6220

Business Centre,

Dubai World Central, PO Box 390667, Dubai UAE

4F, 127 YangHwa-ro, MaPo-gu, Seoul, Korea 04032

Tel: +82 10 7501 7480

Installation Manual for SR-1000 Standalone Integrated Media BlockTM

-5 -

May 15th, 2019

1 INTRODUCTION

1 INTRODUCTION

This document is a guide through the process of setting up the SR-1000 with the projector, audio system, and automation devices used in cinema theatres. In this manual, the SR-1000 WebUI is used to configure the SR-1000. The Dashboard of the SR1000 WebUI is shown below (Refer to Figure 1).

Figure 1: Dashboard tab

Installation Manual for SR-1000 Standalone Integrated Media BlockTM

-6 -

May 15th, 2019

1.INTRODUCTION

1.1 Equipment List

This section provides a suggested installation configuration of GDC SR-1000 for reference. Please contact our sales representative to specify the accessories needed for the installation.

The SR-1000 Packaging Includes:

Item

Qty

Photo

SR-1000 Unit with projector cover plate

1

1# RJ45 AES Audio Cable

RJ45 GPIO Cables

2#

Network Cable

1

RJ45 to DB25 Audio Converter

#

# Subject to actual configuration. Please specify with our sales representative.

Installation Manual for SR-1000 Standalone Integrated Media BlockTM

-7 -

May 15th, 2019

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download