Model 923 Data Logger User Manual - Moog Inc.
Focal Technologies Corporation A Moog Inc. Company 77 Frazee Avenue Dartmouth, Nova Scotia, Canada B3B 1Z4 Tel: (902)468-2263 | focal
Model 923 Data Logger User Manual
Document No.: Revision: Author(s):
Date of Issue:
923-0603-01 2 R.Sawler 2017-04-24
MOOG PROPRIETARY AND CONFIDENTIAL INFORMATION
THIS TECHNICAL DATA/DRAWING/DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO, AND IS THE EXPRESS PROPERTY OF MOOG INC., OR MOOG INC. SUBSIDIARIES EXCEPT AS EXPRESSLY GRANTED BY CONTRACT OR BY OPERATION OF LAW AND IS RESTRICTED TO USE BY ONLY MOOG EMPLOYEES AND OTHER PERSONS AUTHORIZED IN WRITING BY MOOG OR AS EXPRESSLY GRANTED BY CONTRACT OR BY OPERATION OF LAW. NO PORTION OF THIS DATA/DRAWING/DOCUMENT SHALL BE REPRODUCED OR DISCLOSED OR COPIED OR FURNISHED IN WHOLE OR IN PART TO OTHERS OR USED BY OTHERS FOR ANY PURPOSE WHATSOEVER EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY MOOG INC. OR MOOG INC. SUBSIDIARY.
Document Revision History
Model 923 Data Logger ? User Manual
Document Revision
Rev 1
Rev 2
Details of Revision
Initial release. -Updated title page, headers and footers -Change all references of 4 analog channels to 2 -Update GUI images -Update board images to Rev4.0 -Update Analog Inputs section for 2 channel description -Add Adjustable Analog Input display to special features -Updated Serial Output Mode in Modbus table to show only Modbus RTU is supported
Author(s) A. Cabrera
R. Sawler
Date [yyyy-mm-dd]
2015-08-10
2017-04-24
Reference Documents
Document Number
Document Title and Description
923-2004-00
Model 923 Data Logger Configuration Drawing
Focal Technologies Corporation A Moog Inc. Company
Page ii Document No: 923-0603-01, Rev. 2
Model 923 Data Logger ? User Manual TABLE OF CONTENTS
1.0 Introduction........................................................................................................................................... 1-1
2.0 Specifications ....................................................................................................................................... 2-1
3.0 Product Description ............................................................................................................................. 3-1 3.1 Configuration Settings and Initial User Setup............................................................................... 3-2 3.1.1 Configuration Settings ..................................................................................................... 3-2 3.1.2 Initial User Setup ............................................................................................................. 3-3 3.2 Data Logging ................................................................................................................................ 3-3 3.3 Real Time Clock (RTC) ................................................................................................................ 3-3 3.4 On-Board Sensors ........................................................................................................................ 3-4 3.4.1 Temperature and Humidity Sensor ................................................................................. 3-4 3.4.2 3-Axis Accelerometer Sensor (Shock and Vibration) ...................................................... 3-4 3.4.3 Ambient Light Sensor ...................................................................................................... 3-4 3.4.4 Rotation Sensor (Turns Counter and Speed) .................................................................. 3-4 3.5 Interfaces ...................................................................................................................................... 3-5 3.5.1 Thermocouple Inputs ....................................................................................................... 3-5 3.5.2 Analog Inputs................................................................................................................... 3-5
4.0 Hardware ............................................................................................................................................... 4-1 4.1 General Board Handling ............................................................................................................... 4-1
5.0 Electrical Connectors and Pin Descriptions ..................................................................................... 5-1 5.1 9-pin Micro-D Power and Data Connector (J5) ............................................................................ 5-1 5.2 Thermocouple Input Connectors (J6, J15) ................................................................................... 5-1 5.3 12-Pin Analog Input Connector (J4) ............................................................................................. 5-2
6.0 Functionality ......................................................................................................................................... 6-1 6.1 Serial Diagnostic Interface............................................................................................................ 6-1 6.1.1 Modbus RTU ................................................................................................................... 6-1 6.2 Diagnostics Software .................................................................................................................... 6-2 6.2.1 Overview.......................................................................................................................... 6-2 6.2.2 Installation........................................................................................................................ 6-3 6.2.3 Application Usage............................................................................................................ 6-3 6.2.4 Special Features.............................................................................................................. 6-5
7.0 Register Maps ....................................................................................................................................... 7-1 7.1 Modbus RTU Register Map .......................................................................................................... 7-1 7.1.1 On-board Sensor Registers............................................................................................. 7-4 7.1.2 Sensor Data Conversion ................................................................................................. 7-5
Focal Technologies Corporation A Moog Inc. Company
Page iii Document No: 923-0603-01, Rev. 2
LIST OF TABLES
Model 923 Data Logger ? User Manual
Table 2-1: Specifications....................................................................................................................................2-1 Table 3-1: Factory Default Card Configuration Settings (as-built) .....................................................................3-2 Table 5-1: Connector/Mating Connector Part Numbers ....................................................................................5-1 Table 5-2: Micro-D (9-pin) Connector (J5) Pin out.............................................................................................5-1 Table 5-3: Thermocouple Input (3-pin) Connector (J6, J15) Pinout ..................................................................5-1 Table 5-4: Analog Input (12-pin) Connector (J4) Pin out ...................................................................................5-2 Table 6-1: Modbus RTU Frame Format and 923-EDL Defaults ........................................................................6-1
LIST OF FIGURES
Figure 1-1: Model 923 Electronic Data Logger Card .........................................................................................1-1 Figure 3-1: Model 923-EDL Part Locations........................................................................................................3-1 Figure 3-2: Model 923-EDL Typical Setup Connection Using a PC and Focal GUI..........................................3-3 Figure 4-1: Model 923-EDL PCBA .....................................................................................................................4-1 Figure 5-1: Micro-D (9-pin) Power & Data Connector (J5) ................................................................................5-1 Figure 5-2: Thermocouple Input Connectors (J6, J15) ......................................................................................5-1 Figure 5-3: 12-pin Analog Input Connector (J4) ................................................................................................5-2 Figure 6-1: 923-GUI ...........................................................................................................................................6-2 Figure 6-2: Connection Manager .......................................................................................................................6-3 Figure 6-3: Add a New Data Logger Configuration............................................................................................6-4 Figure 6-4: 923-GUI ? Reading the Data from Flash (Internal Log) ..................................................................6-5 Figure 6-5: 923-GUI ? File Read-back Function (Load Log) .............................................................................6-8 Figure 6-6: 923-GUI ? Alarm Configuration .......................................................................................................6-9 Figure 6-7: 923-GUI ? Time Synchronization of 923-EDL RTC's with PC ......................................................6-10 Figure 6-8: 923-GUI ? ADC Controls ...............................................................................................................6-11 Figure 6-9: 923-GUI ? Adjusted Analog Input..................................................................................................6-11
Focal Technologies Corporation A Moog Inc. Company
Page iv Document No: 923-0603-01, Rev. 2
ADC CRC ECL EIA ESD ESR FORJ FPSO HUMS I/O IC kbps LED MB Mbps NRZ PCB PCBA PECL P/N RPM SMT SPI TDM TTL UART uC
Model 923 Data Logger ? User Manual ACRONYMS AND ABBREVIATIONS
Analog to Digital Converter Cyclic Redundancy Check Emitter Coupled Logic (Vcc = 0V) Electronic Industries Association Electrostatic Discharge Electrical Slip Ring Fiber Optic Rotary Joint Floating Production, Storage and Offloading Health and Usage Monitoring System Input/output Integrated Circuit Kilobits Per Second Light Emitting Diode Megabytes Megabits Per Second Non-Return to Zero (bit signaling format) Printed Circuit Board Printed Circuit Board Assembly Positive Emitter Coupled Logic (Vcc = +5 V) Part Number Revolutions Per Minute Surface Mount Technology Serial Peripheral Interface Time Division Multiplexer / Multiplexing Transistor-Transistor Logic Universal Asynchronous Receiver/Transmitter Microcontroller
Focal Technologies Corporation A Moog Inc. Company
Page v Document No: 923-0603-01, Rev. 2
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- metric din 923 slotted pan head screws with shoulder
- bus system cable sac 5p mr 1 0 923 fr can sco 1419075
- quick reference guide intercontec products te connectivity
- model 923 data logger user manual moog inc
- esd9l sesd9l series esd protection diode onsemi
- schedule capital district transportation authority
- a new method for long term source apportionment with time
- product data sheet sikaflex 923