VECODER SERIES MANUAL Pro Video instruments
VECODER ULTRA IP SERIES H264/H265 ENCODER
VECODER SERIES MANUAL
Pro Video instruments
PRODUCT SPECS & FEATURES
Input
Up to 16 HDMI inputs (4 HDMI per HDMI Video Encoder Card)
Supports HDMI Resolution
Supports to up 1080p60fps
Encoding type
H.265/H.264
Encoding Levels
H.264/AVC High/Main/Baseline Profile | H.265/HEVC main profile MJPEG/JPEG baseline
Supported Output Formats
User Selectable outputs to downscale video format
1920x1080', '1680x1056', '1280x720', '1024x768', '1024x576', '850x480', '720x576', '720x540', '720x480', '720x404', '704x576', '640x480', '640x360', '608x448', '544x480', '480x480', '480x384', '480x360', '480x320', '480x272', '480x270', '400x320', '400x224', '352x480', '352x228', '320x256', '320x240', '320x180', '240x180', '176x144'
Video FPS
5-60FPS
Video Bitrate
0.1~ 32Mbps adjustable
Bitrate control VBR / CBR
TS Protocols
SRT / HTTP / HLS / FLV / RTSP / UDP/RTP Multicast / RTMP / ONVIF/ SRT Protocol
Audio Input Sample Rates Encoding Bitrate ONVIF Network Control Panel Firmware Update Remote management
HDMI digital Audio or 2*3.5mm L/R Analog Audio line in for Mixed for HDMI 1 or 2 44.1 kHz, 48.0 kHz AAC / AAC+ / AAC++ / MP3, G.711 (i-Law/a-Law) / AC3 12K ~ 320K adjustable G.711 1000Base-T Ethernet interface Http Web interface Supports Web portal updates
Supports external remote management via port forwarding.
1
VECODER SERIES MANUAL
Working environment
Operating temperature
0 to 40 deg C
Storage temperature
?20 to 80 deg C
Relative Humidity
5% to 90% non-condensing
Dimension & Accessories
Dimension
1U 483 (L) *250 (W) *44.5 (H) mm
Weight
4.5kg
Power adapter AC input 100-240V 50/60Hz DC output 12V 8.5A
Pro Video instruments
2
VECODER SERIES MANUAL DEFAULT IPS:
192.168.1.170
Pro Video instruments 192.168.1.171
192.168.1.168
192.168.1.169
CONNECTING TO THE UNITS
NETWORK CONNECTION VIA WINDOWS PC
These steps walk you through setting a Windows PC to a Static IP address to allow an Ethernet connection with one of the units module on its default IP address. Refer to the photo above for the Default IP.
1. Connect your PC to the Network Port of the VeCOAX unit via Ethernet cable. 2. On your PC, in the Control Panel, open Network and Sharing Center (Network and Internet for Windows 8 and above) 3. Once you have Network and Sharing Center open, click on "Change adapter settings." 4. Right Click on your Local Ethernet connection and click on "Properties." 5. Once the Ethernet Properties are open click on, "Internet Protocol Version 4 (TCP/IPv4) " and click on "Properties." 6. In the Properties, select "Use the following IP address" and set the static IP: 192.168.1.100. 7. Click OK.
You are now ready to connect.
NETWORK CONNECTION VIA MAC OS X
These steps walk you through setting a Windows PC to a Static IP address to allow an Ethernet connection with one of the units module on its default IP address. Refer to the photo above for the Default IP.
1. Connect your Mac to the Network Port of the VeCOAX unit via Ethernet cable. 2. From the Apple menu, select System Preferences, then select network. 3. Select Ethernet. 4. From the Configure IPv4 menu, select Manually. 5. Enter the IP address 192.168.1.100. 6. Enter the Subnet Mask 255.255.255.0. 7. It is not necessary to enter DNS or Router. 8. Click Apply. You are now ready to connect.
3
VECODER SERIES MANUAL DEFAULT IPS:
192.168.1.170
Pro Video instruments 192.168.1.171
192.168.1.168
192.168.1.169
Note: The following manual uses references and examples to demonstrate the functions of the unit. Menu features and format might differ from your model; however, the core features are the same.
POWERING THE DEVICE ? QUICK GUIDE
1. Connect your included Power cord to the unit. 2. Once the unit is powered on, insert your valid HDMI Video Signals into the HDMI ports 3. Set your computer to a static IP as 192.168.1.100 ( Refer to "connecting to unit" guide above) 4. Connect your PC ETHERNET PORT to the Vecoder's First Module ETHERNET PORT using a patch cord. Depending on the
number of modules you have will determine the available channels and default ip's. We recommend you connect to the first module with the default IP label of 192.168.1.168. ( Please refer to picture above) 5. Run VLC Video LAN video playback software ( ) On VLC > MEDIA > OPEN NETWORK STREAM > . You should now see the video playing on VLC 6. Each module has its own Lan port. 7. Each module has four channels/HDMI Inputs. Depending on the module you are connected to will determine the Stream IP you use in VLC. Please refer to the Welcome Status page of the module you are connected to for the IP streams available.
NOTE: If the above is not working, please check all connections, network settings, and ensure your video source works. You could also try with another pc, or reset the VeCoder unit by pressing the Reset button for 20 seconds on the rear panel of the unit.
This will default the modules' IP settings back to the default of 192.168.1.168.
4
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- is 382 user manual portech
- cisco model dpc3216 docsis 3 0 16x4 cable modem with
- srx240 services gateway juniper
- vecoder series manual pro video instruments
- voip 500 series phone configuration and operation manual
- ipn series snapav
- avm 1 ip video attendant station configuration operation
- manual bluenet bn2000 bachmann
- zx100 ip pbx user s manual
- lilin m series camera user manual table of contents
Related searches
- texas instruments ba ii plus calculator
- texas instruments ti 84 plus online free
- texas instruments calculator online
- ifrs 9 financial instruments pdf
- measuring instruments tools
- texas instruments ti 30xs calculator
- texas instruments ti 30
- texas instruments calculator ti 30
- texas instruments calculator manuals
- texas instruments ti 30x
- texas instruments ti 30xiis instruction book
- texas instruments calculator app