Technical Information Spreading rate: 300 m²/l at 1 µm ...
[Pages:2]JSON created 2023-03-24T11:58:38+0000, MPV 4.1
Technical Information
923-57
MS Clear mat Flexible
Application:
Key Features: Remarks:
.
Spreading rate
Two-pack clear for mat basecoat/clearcoat systems on plastics. In order to achieve different gloss levels, you can mix the product with Glasurit 923-55 MS clear coat extra mat. For further information, please refer to Glasurit Know-How module "Clearcoat Processes Mat Clear System". Silky matt, elastified (gloss: 53 ? 5 at an angle of 60 degrees) ? Use hardeners and reducers depending on ambient temperature and size of object to be painted. ? Suitable for the repair of silky mat OEM finishes. ? Suitable for finishing bumpers, etc.
300 m?/l at 1 ?m
.
Mixing Ratio
2:1+10 % 100 % by volume
923-57
Hardener
50 % by volume
929-93
Reducer
10 % by volume
352-91
Spray viscosity at 20?C DIN 4:
18-20 s
Potlife at 20?C
4 h
.
Safety advice:
The products are suitable for professional use only. It cannot be ruled out that this product contains particles < 0.1 m. 2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC
content of this product is 700 g/litres.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our
products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the
suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose
only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes
all previous versions. You can obtain the latest version from our website at or directly from your sales partner. It is the responsibility of the recipient of our
products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 M?nster - Germany
11/2022
Page 1 of 2
JSON created 2023-03-24T11:58:38+0000, MPV 4.1
Technical Information
923-57
MS Clear mat Flexible
Application: Application pressure Nozzle pressure Nozzle size Number of spray coats
Flash off at 20?C
Film thickness
Compliant gravity-feed spray gun
HVLP spray gun
bar
2
bar
0.7
1.3-1.4
1.3
2
min
Flash off until mat after each spraycoat and before baking. After the first spraycoat, allow to flash off for 10 - 15 min, after the second spraycoat for 15 - 20 min.
Do not flash off for more than 25 min after each spraycoat.
m
40-50
.
Drying at 20?C
8 min
Drying at 60?C
30 min
Infrared (short wave)
8 min
Infrared (medium wave) 10-15 min
.
Please note: For automotive refinish, repair instructions of vehicle manufacturers, in particular regarding installed sensor technology, must always be observed in addition to the processing instructions given within this document.
Safety advice:
The products are suitable for professional use only. It cannot be ruled out that this product contains particles < 0.1 m. 2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC
content of this product is 700 g/litres.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our
products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the
suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose
only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes
all previous versions. You can obtain the latest version from our website at or directly from your sales partner. It is the responsibility of the recipient of our
products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 M?nster - Germany
11/2022
Page 2 of 2
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- montageanleitungen conrad electronic
- 9 2 3 n l e n o l a r o a d
- bus system cable sac 5p ms 2 0 923 can sco 1419039
- esd9l sesd9l series esd protection diode
- opteva 923 in lobby teller ilt diebold nixdorf
- tb 2252 xcede hd xcede hd plus backplane arrow
- technical information spreading rate 300 m² l at 1 µm
- title 14 education 1 delaware administrative code
- cmatvs3v3 cmatvs5v0 surface mount silicon central semi
- bridge section deldot