With Digital Pressure Control
AVENTICSTM Proportional Valves SentronicD
With Digital Pressure Control
Series
608/ 609
FEATURES ? SentronicD is a highly dynamical 3-way proportional valve with digital control. ? SentronicD stands for:
- Digital communication and control
- Display (integrated)
- Direct operated valve
- Dynamic behaviour (high speed) ? A special feature of the SentronicD is its DaS software supplied for optimum
adjustmentover PC and viewing of setpoint and feedback signals.
? Other functions are valve diagnostics, parameter setting and maintenance.
? The valve's outlet pressure can also be adjusted over the integrated display and
the function buttons.
GENERAL
Fluids Air or neutral gases filtered at 50 ?m, without conden-
sate, lubricated or unlubricated
Maximum allowable pressure (MAP) 6 to 13 bar
Pressure range
0-3 bar, 0-6 bar, 0-10 bar
Fluid temperature
0?C to +60?C
Ambient temperature
0?C to +50?C
Flow (Qv at 6 bar)
470 to 1300 l/min (ANR)
Setpoint
0 - 10 V (impedance 100 k)
0 - 20 mA /4 - 20 mA (impedance 250)
Hysteresis
< 1% of span
Linearity
< 0,5% of span
Repeatability
< 0,5% of span
Minimum setpoint
100 mV (0,2 mA/4,2mA) with shutoff function
Minimum outlet pressure
1% of span
CONSTRUCTION Body Internal parts Seals
aluminium POM (polyacetal) NBR (nitrile) and FPM (fluoroelastomer)
ELECTRICAL CHARACTERISTICS
nominal diameter DN (mm)
4 8
* Max. ripple: 10 % SPECIFICATIONS
stabilised voltage *
24 V = +/-10%
max. power (W)
21 40
max. current (mA)
850 1650
insulation class
H
degree of protection
IP 65
electrical connection
5-pin M12 connector (not supplied)
? ports
G 1/8 G 1/4
? orifice DN (mm)
4
KV coefficient (Nm3/h) 0,43
G 1/4 G 3/8
8
1,2
Test conditions according to ISO 8778: temperature: 20 ?C, relative inlet pressure: 6 bar, relative outlet pressure: 5 bar
flow
at 6 bar (l/min - ANR) 470 1300
00249GB-2021/R01 Availability, design and specifications are subject to change without notice. All rights reserved.
Visit our website at AVENTICS
1
Series
608/ 609
AVENTICSTM Proportional Valves SentronicD
With Digital Pressure Control
HOW TO ORDER
NNN: Nominal diameter 608 = DN 4mm 609 = DN 8mm
C: Connection 0 = G 1/8 (DN4), G 1/4 (DN 8) 1 = G 1/4 (DN 4), G 3/8 (DN 8) 2 = Subbase G 1/8 (DN 4), G 1/4 ( DN 8) 5 = NPT 1/8 (DN 4), NPT 1/4 (DN 8) 6 = NPT 1/4 (DN 4), NPT 3/8 (DN 8)
NNN
P: Pressure range
max. allowable
pressure (MAP)
1 = 0 - 10 bar 13 bar
3 = 0 - 3 bar
6 bar
6 = 0 - 6 bar
9 bar
S: Setpoint 0 = 0 - 10 V 1 = 0 - 20 mA 2 = 4 - 20 mA
C P S A DE
Configurator - CAD Files
E: Display 0 = without display 1 = with display
D: Digital output 1 = Pressure switch output PNP ? 5 %
A: Analog output 1 = Feedback output 0 -10 V 2 = Feedback output 0 - 20 mA 3 = Feedback output 4 - 20 mA
2
Visit our website at AVENTICS
AVENTICSTM Proportional Valves SentronicD
With Digital Pressure Control
DIMENSIONS (mm), WEIGHT (kg) Inline version
DN 4 Weight: 0,56 kg
Connector
Configurator - CAD Files
Fixing holes: M4 thread
Series
608/ 609
G1/8",G1/4"
Programming interface
Hole for M4 screw (*)
*Remove the pre-installed screws to use the through holes to mount the valve.
DN 8 Weight: 1,13 kg
M4 hole for earth screw G1/8",G1/4" Hole for M4 screw (*)
Fixing holes: M4 thread
00249GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved.
Programming interface
Hole for M4 screw G1/4",G3/8"
Visit our website at AVENTICS
M4 hole for earth screw
Connector G1/4",G3/8"
3
Series
608/ 609
AVENTICSTM Proportional Valves SentronicD
With Digital Pressure Control
DIMENSIONS (mm), WEIGHT (kg) Subbase version
DN 4 Weight: 0,56 kg
Connector
Configurator - CAD Files
Hole for M4 screw
Programming interface
Hole for M4 screw
DN 4 Subbase
Hole for M4 screw
M4 hole for earth screw
Hole for M4 screw
00249GB-2021/R01 Availability, design and specifications are subject to change without notice. All rights reserved.
4
Visit our website at AVENTICS
AVENTICSTM Proportional Valves SentronicD
With Digital Pressure Control
DIMENSIONS (mm), WEIGHT (kg) Subbase version
DN 8 Weight: 1,13 kg
Configurator - CAD Files
Series
608/ 609
Hole for M4 screw
Programming interface
DN 8 Subbase
Hole for M4 screw
M4 hole for earth screw
Connector
00249GB-2021/R01 Availability, design and specifications are subject to change without notice. All rights reserved.
Hole for M4 screw
Visit our website at AVENTICS
5
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- numerical solution of ordinary differential equations
- rohs compliant application dimensions
- woodruff key dimensions fastener mart
- ltc6911 1 ltc6911 2 dual matched amplifiers descriptio u
- with digital pressure control
- pedestrian facilities sheet 1 of 12
- personal affairs army voting assistance program
- personal affairs the army family advocacy program
- 0 1 2003 4 53 6 0 788 3 0 9 3
- tps54429 step down converter evaluation module user s
Related searches
- blood pressure medications with least side effects
- blood pressure medicine with less side effect
- blood pressure still high with medication
- blood pressure medication with least side effects
- blood pressure medication with no side effects
- blood pressure not going down with medication
- blood pressure meds with least side effects
- inventory control with barcode scanner
- pressure control ventilation for dummies
- pressure control vent setting
- assist control vs pressure control
- digital hydraulic pressure test kit