RMCF / RMCP Series ± 200 0.1 - 0.976 ± 400 ± 100 10 - 10M ...
嚜燎MCF / RMCP Series
Stackpole Electronics, Inc.
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
Resistive Product Solutions
Features:
?
?
?
?
?
?
?
?
RMCF 每 standard power ratings
RMCP 每 high power ratings
Nickel barrier terminations standard
Power derating from 100% at 70?C to zero at +155?C
AEC-Q200 compliant (except RMCP0201)
RoHS compliant and halogen free
REACH compliant
For ultra high power, see RMCP-UP Series 每 Thick Film Ultra High Power Chip Resistor
Electrical Specifications - RMCF
Type/Code
Power Rating
(W)
@ 70?C
Max.
Working
Voltage (V)
(1)
Max.
Overload
Voltage (V)
Max.
Jumper Current
(A)
RMCF01005
0.03
15
30
0.5
RMCF0201
0.05
25
50
0.5
RMCF0402
0.063
50
100
1
RMCF0603
0.1
75
150
1
RMCF0805
0.125
150
300
2
RMCF1206
0.25
200
400
2
RMCF1210
0.5
200
400
3
RMCF2010
0.75
200
400
3
RMCF2512
1
200
400
3
TCR (ppm/?C)
Ohmic Range (次) and Tolerance
1%
㊣ 300
㊣ 200
㊣ 400
㊣ 200
㊣ 200
㊣ 100
㊣ 200
㊣ 500
㊣ 400
㊣ 200
㊣ 100
㊣ 200
㊣ 200
㊣ 100
㊣ 200
㊣ 200
㊣ 100
㊣ 200
㊣ 200
㊣ 400
㊣ 100
㊣ 200
㊣ 400
㊣ 200
㊣ 100
㊣ 200
㊣ 400
㊣ 200
㊣ 100
(2)
5%
10 - 97.6
100 - 1M
1 - 9.76
10 - 10M
1 - 9.76
10 - 1M
1.02M - 10M
1.1M - 20M
0.1 - 0.499
0.5 - 0.976
1 - 9.76
1 - 20M
10 - 1M
1.02M - 10M
0.1 - 9.76
0.1 - 20M
10 - 1M
1.02M - 10M
0.1 - 9.76
0.1 - 20M
10 - 1M
1.02M - 10M
0.1 - 0.976
1 - 9.76
10 - 10M
0.1 - 0.976
1 - 9.76
10 - 10M
10 - 10M
0.1 - 0.976
1 - 9.76
10 - 10M
10 - 10M
-
Notes: (1) Lesser of ﹟ P*R or maximum working voltage
(2) Contact Stackpole for higher or lower values
Rev Date: 1/17/2022
This specification may be changed at any time without prior notice.
Please confirm technical specifications before you order and/or use.
1
marketing@
RMCF / RMCP Series
Stackpole Electronics, Inc.
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
Resistive Product Solutions
Electrical Specifications - RMCP
Type/Code
Power Rating
(W)
@ 70?C
Max.
Working
(1)
Voltage (V)
Max.
Overload
Voltage (V)
Max.
Jumper Current
(A)
RMCP0201
0.063
25
50
1
RMCP0402
0.125
50
100
1.5
RMCP0603
0.25
75
150
2
RMCP0805
0.33
150
300
2.5
RMCP1206
0.5
200
400
3.5
RMCP1210
0.66
200
400
5
RMCP2010
1
200
400
6
RMCP2512
2
250
500
7
TCR (ppm/?C)
Ohmic Range (次) and Tolerance (2)
-200 / +400
㊣ 200
㊣ 200
㊣ 100
㊣ 200
㊣ 100
㊣ 200
㊣ 100
㊣ 400
㊣ 100
㊣ 400
㊣ 100
㊣ 200
㊣ 100
㊣ 200
㊣ 100
1%, 5%
1 - 9.76
10 - 10M
1 - 9.76
10 - 10M
1 - 9.76
10 - 10M
1 - 9.76
10 - 10M
1 - 9.76
10 - 10M
1 - 9.76
10 - 10M
1 - 9.76
10 - 10M
1 - 9.76
10 - 10M
Notes: (1) Lesser of ﹟ P*R or maximum working voltage
(2) Contact Stackpole for higher or lower values
Electrical Specifications - Jumper
Type/Code
RMCF01005
RMCF0201
RMCF0402
RMCF0603
RMCF0805
RMCF1206
RMCF1210
RMCF2010
RMCF2512
Jumper Rated Current
(A)
0.5
0.5
1
1
2
2
3
3
3
Max Overload Current
(A)*
1
1
3
5
5
10
12
12
15
Jumper Resistance Value
(次)
0.05 max.
* < 1 second and 1 time
Mechanical Specifications
Type/Code
Average Unit
Weight (mg)
RMCF01005
0.07
RMCF0201
RMCP0201
RMCF0402
RMCP0402
RMCF0603
RMCP0603
RMCF0805
RMCP0805
0.16
0.57
0.62
1.88
2.04
5.00
4.37
L
Body Length
0.016 ㊣ 0.001
0.40 ㊣ 0.02
0.024 ㊣ 0.001
0.60 ㊣ 0.03
0.039 ㊣ 0.004
1.00 ㊣ 0.10
0.061 ㊣ 0.006
1.55 ㊣ 0.15
0.079 ㊣ 0.008
2.00 ㊣ 0.20
W
Body Width
0.008 ㊣ 0.001
0.20 ㊣ 0.02
0.012 ㊣ 0.001
0.30 ㊣ 0.03
0.020 ㊣ 0.002
0.50 ㊣ 0.05
0.031 ㊣ 0.006
0.80 ㊣ 0.15
0.049 ㊣ 0.004
1.25 ㊣ 0.10
Rev Date: 1/17/2022
This specification may be changed at any time without prior notice.
Please confirm technical specifications before you order and/or use.
2
H
Body Height
0.005 ㊣ 0.001
0.13 ㊣ 0.02
0.009 ㊣ 0.002
0.23 ㊣ 0.05
0.012 ㊣ 0.004
0.30 ㊣ 0.10
0.018 ㊣ 0.006
0.45 ㊣ 0.15
0.020 ㊣ 0.006
0.50 ㊣ 0.15
a
Top Termination
0.004 ㊣ 0.001
0.10 ㊣ 0.03
0.006 ㊣ 0.002
0.15 ㊣ 0.05
0.006 ㊣ 0.004
0.15 ㊣ 0.10
0.012 ㊣ 0.008
0.30 ㊣ 0.20
0.014 ㊣ 0.010
0.35 ㊣ 0.25
b
Bottom Termination
0.004 ㊣ 0.001
0.10 ㊣ 0.03
0.006 ㊣ 0.002
0.15 ㊣ 0.05
0.010 ㊣ 0.006
0.25 ㊣ 0.15
0.012 ㊣ 0.008
0.30 ㊣ 0.20
0.014 ㊣ 0.010
0.35 ㊣ 0.25
Unit
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
marketing@
RMCF / RMCP Series
Stackpole Electronics, Inc.
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
Resistive Product Solutions
Mechanical Specifications (cont.)
Type/Code
RMCF1206
RMCP1206
RMCF1210
RMCP1210
RMCF2010
RMCP2010
RMCF2512
RMCP2512
Average Unit
Weight (mg)
8.86
8.95
15.55
15.96
23.56
24.24
40.02
39.45
L
Body Length
0.126 ㊣ 0.010
3.20 ㊣ 0.25
0.126 ㊣ 0.010
3.20 ㊣ 0.25
0.197 ㊣ 0.008
5.00 ㊣ 0.20
0.248 ㊣ 0.008
6.30 ㊣ 0.20
W
Body Width
0.063 ㊣ 0.006
1.60 ㊣ 0.15
0.098 ㊣ 0.010
2.50 ㊣ 0.25
0.098 ㊣ 0.008
2.50 ㊣ 0.20
0.126 ㊣ 0.010
3.20 ㊣ 0.25
H
Body Height
0.022 ㊣ 0.006
0.55 ㊣ 0.15
0.022 ㊣ 0.006
0.55 ㊣ 0.15
0.022 ㊣ 0.006
0.55 ㊣ 0.15
0.022 ㊣ 0.008
0.55 ㊣ 0.20
a
Top Termination
0.020 ㊣ 0.012
0.50 ㊣ 0.30
0.020 ㊣ 0.012
0.50 ㊣ 0.30
0.024 ㊣ 0.012
0.60 ㊣ 0.30
0.024 ㊣ 0.012
0.60 ㊣ 0.30
b
Bottom Termination
0.020 ㊣ 0.012
0.50 ㊣ 0.30
0.020 ㊣ 0.012
0.50 ㊣ 0.30
0.024 ㊣ 0.014
0.60 ㊣ 0.35
0.024 ㊣ 0.014
0.60 ㊣ 0.35
Unit
inches
mm
inches
mm
inches
mm
inches
mm
Performance Characteristics
Test
Test Specifications
Test Conditions (JIS-C 5202)
㊣ (2% + 0.1次)
2.5 X rated voltage for 5 seconds
0201 = 1A
0402 / 0603 / 0805 = 2.5A
1206 / 1210 / 2010 / 2512 = 5A
100 VAC, 1 minute
260?C ㊣ 5?C, for 10 seconds ㊣ 0.5 seconds (Solder Bath)
235?C ㊣ 5?C, for 2 seconds ㊣ 0.5 seconds (Colophonium flux)
-65?C: 30 minutes 25?C: 2 to 3 minutes
155?C: 30 minutes 25?C: 2 to 3 minutes
(5 Cycles)
Short Time Overload
Jumper: Max 0.05次 after test
Dielectric Withstanding Voltage
Resistance to Soldering Heat
Solderability
No flashover or breakdown
㊣ 1%
95% coverage, minimum
Temperature Cycle
㊣ (1% + 0.05次)
Jumper (< 0.05次)
Load Life
(Endurance)
1% and below: ㊣ (1% + 0.05次)
2% and 5%: ㊣ (3% + 0.1次)
Value < 1次: ㊣ (3% + 0.1次)
Jumper: Max 0.1次 after test.
Voltage Coefficient
㊣ 100 (ppm/V)
70?C ㊣ 2∼C, RCWV or max. working voltage whichever is less
for 1000 hours with 1.5 hours "ON" and 0.5 hour "OFF"
1/10 rated voltage for 3 seconds max. then rated voltage for
3 seconds max.
Bend of 3 mm for 5 ㊣ 1 seconds
The tested resistor should be immersed into isopropyl alcohol of
20?C ~ 25∼C for 60 seconds. Then the resitor is left in the room
for 48 hours.
㊣ (1% + 0.05次)
1%: ㊣ (0.5% + 0.05次)
Resistance to Solvent
5%: ㊣ (0.5% + 0.05次)
Jumper: Max. 0.05次 after test
1%: ㊣ (1% + 0.05次)
40?C ㊣ 2∼C, 90%~95% R.H. RCWV or max. working voltage
5%: ㊣ (2% + 0.05次)
Damp Heat with Load
whichever is less for 1000 hours with 1.5 hours "ON" and 0.5 hours
Values < 1次: ㊣ (3% + 0.1次)
"OFF"
Jumper: Max. 0.1次 after test
Operating temperature range is -55∼C to +155∼C for all sizes except for 01005 size
Operating temperature range for 01005 is -55∼C to +125∼C
Power Derating Curve:
PERCENT RATED POWER (%)
Robustness of Termination
120
-55
70
100
80
60
40
20
125
155
0
-100
-50
0
50
100
AMBIENT TEMPERATURE (?C)
01005 size
Rev Date: 1/17/2022
This specification may be changed at any time without prior notice.
Please confirm technical specifications before you order and/or use.
3
150
200
All other sizes
marketing@
RMCF / RMCP Series
Stackpole Electronics, Inc.
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
Resistive Product Solutions
Repetitive Pulse Information
(This information is for reference only and is not guaranteed performance.)
If repetitive pulses are applied to resistors, pulse wave form must be less than ※Pulse limiting voltage§, ※Pulse limiting
current§ or ※Pulse limiting wattage§ calculated by the formula below.
Vp = K﹟P x R x T/t
lp = K﹟P/R x T/t
Pp = K2 x P x T/t
Where: Vp:
lp:
Pp:
P:
R:
T:
t:
K:
[Vr:
Pulse limiting voltage (V)
Pulse limiting current (A)
Pulse limiting wattage (W)
Power rating (W)
Nominal resistance (ohm)
Repetitive period (sec)
Pulse duration (sec)
Coefficient by resistors type (refer to below matrix)
Rated Voltage (V), Ir: Rated Current (A)]
Note 1: If T > 10 ↙ T = 10 (sec), T / t > 1000 ↙ T / t = 1000
Note 2: If T > 10 and T / t > 1000, ※Pulse Limiting power (Single pulse) is applied
Note 3: If Vp < Vr (lp < lr or Pp < P), Vr (lr, P) is Vp (lp, Pp)
Note 4: Pulse limiting voltage (current, wattage) is applied at less than rated ambient temperature. If ambient
temperature is more than the rated temperature (70∼C), please decrease power rating according to ※Power Derating
Curve§
Note 5: Please assure sufficient margin for use period and conditions for ※Pulse limiting voltage§
Note 6: If the pulse waveform is not square wave, please judge after transform the waveform into square wave
according to the ※Waveform Transformation to Square Wave§.
RMCF Coefficient (K) Matrix
Ohmic Value
K
R < 10次
10次 ≒ R < 100次
100次 ≒ R < 1K次
1K次 ≒ R < 10K次
10K次 ≒ R
0.50
0.45
0.35
0.25
0.20
Rev Date: 1/17/2022
This specification may be changed at any time without prior notice.
Please confirm technical specifications before you order and/or use.
4
marketing@
RMCF / RMCP Series
Stackpole Electronics, Inc.
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
Resistive Product Solutions
Waveform Transformation to Square Wave
1.
Discharge curve wave with time constant ※t§ ↙ Square wave
2.
Damping oscillation wave with time constant of envelope ※t§ ↙ Square wave
3.
Half-wave rectification wave ↙ Square wave
4.
Triangular wave ↙ Square wave
5.
Special wave ↙ Square wave
Rev Date: 1/17/2022
This specification may be changed at any time without prior notice.
Please confirm technical specifications before you order and/or use.
5
marketing@
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- homework 8 solutions university of california san diego
- manual for soa exam mlc binghamton university
- motor current rating chart sprecher schuh
- 0 30 glendale community college
- fastener torque charts imperial supplies
- problem 3 iowa state university
- using engineer and architect scales a primer
- solutions to problem set mit opencourseware
- rmcf rmcp series ± 200 0 1 0 976 ± 400 ± 100 10 10m
- method 300 0 determination of inorganic anions by ion
Related searches
- minecraft 0 1 0 download
- 10 0 0 0 1 gateway
- 10 0 0 0 1 admin
- 100 0 0 1 admin
- 1 or 2 784 784 1 0 0 0 1 10 run as administrator command prompt
- 1 or 3 784 784 1 0 0 0 1 10 run as administrator command prompt
- 1 or 2 310 310 1 0 0 0 1 10 run as administrator command prompt
- 1 or 3 310 310 1 0 0 0 1 10 run as administrator command prompt
- 1 or 2 393 393 1 0 0 0 1 10 run as administrator command prompt
- 1 or 3 393 393 1 0 0 0 1 10 run as administrator command prompt
- 1 or 2 570 570 1 0 0 0 1 10 run as administrator command prompt
- 1 or 3 570 570 1 0 0 0 1 10 run as administrator command prompt