Cordless In ator and Rechargeable 12-Volt Power Pack
Cordless Inflator and
Rechargeable 12-Volt Power Pack
Operating Instruction
Model: CC2300
EN
? 2016 Campbell Hausfeld
A Marmon/Berkshire Hathaway Company
IN239003AV 4/16
Please read and save these instructions. Read carefully before attempting to
assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply
with instructions could result in personal injury and/or property damage! Retain
instructions for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to
this manual or file it for safekeeping.
Model #: ___________________________
Serial #: ____________________________
Purchase Date: ______________________
For parts, product & service information
visit
Campbell Hausfeld
100 Production Drive
Harrison, Ohio 45030
REGISTER YOUR PRODUCT ONLINE NOW!??
READ AND FOLLOW ALL INSTRUCTIONS ? SAVE THESE INSTRUCTIONS ? DO NOT DISCARD
Description
The cordless inflator delivers up to 230/250 psi and serves as a rechargeable 12-volt power supply. This
inflator inflates tires, rafts and sports equipment and also powers 12-volt tools and appliances.
GETTING STARTED
BEFORE YOU BEGIN
UNPACKING
GENERAL SAFETY INSTRUCTIONS
SAFETY /
SPECIFICATIONS
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts. Check to be sure all supplied accessories are enclosed with the unit. In case
of questions, damaged or missing parts, please call 1-800-543-6400 for customer assistance.
Safety Guidelines
This manual contains information that is very important to know and understand. This information is
provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe
the following symbols.
Warning indicates a potentially hazardous situation which, if not avoided, COULD result in
death or serious injury.
Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or
moderate injury.
Notice indicates important information, that if not followed, may cause damage to equipment.
ASSEMBLY /
INSTALLATION
Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death
or serious injury.
NOTE: Information that requires special attention.
Safety Symbols
The following Safety Symbols appear throughout this manual to alert you to important safety hazards and
precautions.
OPERATION
MANUAL
Read
Manual
First
Risk of
Fire
California Proposition 65
Important Safety Information
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the
product described. Protect yourself and others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage! Retain instructions for future reference.
This manual contains important safety, operational and maintenance information. If you have any
questions, please call 1-800-543-6400 for customer assistance.
TROUBLESHOOTING
This product or its power cord MAY contain chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm. Wash hands after handling.
The following safety precautions must be followed at all times along with any other existing safety rules:
MANUAL
Completely read the manual(s) included with this product carefully. Be thoroughly familiar with the
proper use of the unit.
2.
Do not continue to operate if the yellow light remains on when the motor is not running, do not
continue to operate the unit until it is recharged.
3.
Only use the enclosed recharging adapters.
1
MAINTENANCE /
REPAIR
1.
GETTING STARTED
SAFETY /
SPECIFICATIONS
GENERAL SAFETY INSTRUCTIONS (CONTINUED)
4.
Avoid charging the battery at temperatures below 40¡ãF (5¡ã C) or above 105¡ãF (40¡ãC).
Do not operate the inflator with the 120-volt AC recharging adapter connected to the unit
because the charger could become damaged.
5.
Never operate the inflator near fire, flammable gas or liquid.
6.
Never leave unit unattended while in use.
7.
Protect the unit from rain, snow or other sources of moisture.
8.
Do not put metal objects into the 12-volt DC power outlet.
9.
Always replace the fuse with the same amperage rating (10 amp). Never use a fuse with a higher
amperage rating.
The cordless inflator battery is not fully charged. The battery must be charged using either the 120-volt
AC or the 12-volt DC recharging adapter before the initial use. For best results, charge the battery in
temperatures ranging from 65¡ãF (18¡ãC) to 75¡ãF (24¡ãC).
PERFORMANCE
12-Volt Power Pack Appliance Running Time
ASSEMBLY /
INSTALLATION
Television @ 8 watts = 14 hours
Light @ 55 watts = 2 hours
Cordless Inflator: Number of Objects Inflator Will Fill
8 Car Tires @ 30 psi
29 Rafts @ 1 psi
190 Soccer Balls @ 9 psi
Battery must be charged before initial use and if the yellow remains on while the unit is not
running. If the power is totally drained from the battery and not recharged, the battery may not
be rechargeable. Recharge the unit every 3-to-6 months even if the unit has not been used.
120-Volt AC Recharging
To recharge the battery using the 120-volt AC adapter, follow the subsequent procedures:
1.
Push the power switch to the off position and insert the 120-volt AC recharging adapter into the AC
charge input socket located next to the power switch.
2.
Plug the charger into a 110/120-volt electrical outlet.
3.
The red charging light will come on indicating the battery is recharging and will remain on until
charger is removed. No other indicator lights will come on.
4.
Charge the inflator for 14 to 16 continuous hours before initial use. After multiple uses, recharge the
battery for 7 to 9 hours. If the unit is used too long after the yellow light comes on, recharging time
could take up to 20 hours and the battery life may be shortened.
Do not operate the unit while recharging with the 120-volt AC adapter. Damage will occur to
the charger.
MAINTENANCE /
REPAIR
TROUBLESHOOTING
OPERATION
OPERATING INSTRUCTIONS
2
This unit is NOT intended for recharging a car battery.
Never start the car (vehicle) when the 12-volt DC recharging adapter is plugged into the
cigarette lighter.
GETTING STARTED
12-Volt DC Recharging
NOTE: Charging the battery while the car engine is not running drains the car battery and is not
recommended. If the unit is used too long after the yellow light comes on, recharging time could take up to
7 hours.
1.
Insert the 12-volt DC recharging adapter into the 12-volt DC output socket.
2.
Insert the other end into the cigarette lighter and rotate to make a good electrical contact.
3.
The inflator should be charged for 5 to 6 hours while driving before the initial use. After multiple uses,
recharge the inflator for 3 hours.
SAFETY /
SPECIFICATIONS
To recharge the battery using the 12-volt DC adapter while driving, follow the subsequent procedures:
Battery Indicator Lights
Green and yellow lights show the battery condition while the compressor switch is
in the off position. The green light indicates a charged battery. The yellow light indicates the battery is low
and needs recharging. The red light indicates the AC charger is connected and charging.
GREEN LIGHT
YELLOW LIGHT
RED LIGHT
ON
OFF
OFF
BATTERY INDICATION *
Full to Normal
ON
ON
OFF
Weak, Needs Recharging
OFF
ON
OFF
Exhausted, Needs Recharging IMMEDIATELY
OFF
OFF
ON
AC Charger Connected
ASSEMBLY /
INSTALLATION
If the battery is drained after the green light is off, the life of the battery may be shortened.
* While the compressor switch is in the off position.
Inflation Instructions
Do not leave the inflator unattended while the unit is running.
Turn unit off to allow inflator to cool for 20 minutes after 20 minutes of continuous operation.
If not cooled properly the inflator will overheat.
OPERATION
accessories.
The universal adapter must be locked to secure the inflation accessories. Any misuse could
cause property damage or personal injury. Use extreme caution when using inflation
Make sure the universal adapter touches the core of tire valve stem.
1.
Remove valve stem cap. Attach the universal
adapter from the air inflator to the valve stem
with the lever in the up position. Be sure to
press universal adapter down over valve stem
threads completely. When universal adapter is
firmly in place, press locking lever down to lock
onto valve stem (See Fig 1).
LOCK
Universal
Adapter
2.
To use the inflation accessories, insert piece into
the universal adapter and push the lever to lock
into place
(See Figure 1). The inflation accessory will fit
securely.
3.
Insert the appropriate inflation accessory into
the inflatable object.
4.
Turn on the power and the compressor switch.
5.
When the object is firm, turn the inflator off. Do not over inflate objects.
Valve Stem
Figure 1
MAINTENANCE /
REPAIR
3
TROUBLESHOOTING
After the battery is charged, the inflator is ready for use. If the battery has not been charged, see sections
120-VOLT AC CHARGING or 12-VOLT DC CHARGING before continuing.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- portable 12 volt power pack
- small 12 volt power supply
- 12 volt power supply ebay
- 12 volt power supply
- 12 volt power supply adapter
- 12 volt power adapter
- 12 volt power plug adapters
- lithium 12 volt power pack
- small 12 volt power pack
- 12 volt battery pack rechargeable
- 12 volt power supplies
- best 12 volt power supply