Current Contract Information Form
State of Washington
Current Contract Information
Effective Date: July 18, 2011
|Contract number: |08206 |Commodity code: |2320 |
|Contract title: |WALK-IN STEP VANS –VARIOUS SIZES |
|Purpose: |INCREASE AN OPTION DEDUCTION FOR V8 GASOLINE ENGINE |
|Current period: |February 27, 2011 |through: |February 26, 2013 |
|Contract type: |This contract is designated as convenience use. |
|Scope of contract |This contract is awarded to one contractor(s). |
|Primary user: |Tacoma Public Utility |
|Additional use by: |All State Agencies, Political Subdivisions of Washington and Oregon State, Qualified Non-profit Corporations, Materials |
| |Management Center, Participating Institutions of Higher Education (College and Universities, Community and Technical |
| |Colleges). |
|Contractor: |Valley Freightliner, Inc. |Contact: |Wayne Schulz |
|Address: |277 Stewart Road SW |Phone: |(800-523-8014 |
| |Pacific, WA 98047-2110 |FAX: |253-863-6473 |
| | |Supplier No.: |W94 |
|Email: |WSchulz@ |Fed. I.D. No.: |91-1344257 |
| | | | |
This page contains key contract features. Find detailed information on succeeding pages. For more information on this contract, or if you have any questions, please contact your local agency Purchasing Office, or you may contact our office at the numbers listed below.
|Contract Specialist: |Steve Jenkins |Customer Service |
|Phone Number: |(360) 407-9415 |Phone Number: |(360) 902-7400 |
|Fax Number: |(360) 586-2426 |Fax Number: |(360) 586-4944 |
|Email: |steve.jenkins@des. |Email: |csmail@des. |
Visit our Internet site:
|Products/Services available: |WALK-IN STEP VANS-VARIOUS SIZES |
|Ordering information: |See page 2 Note III |
|Ordering procedures: |See page 2 Note II |
|Special notes: |See Below |
|Payment address: |277 Stewart Rd. SW Pacific, WA 98047 |
|Order placement address: |277 Stewart Rd. SW Pacific, WA 98047 |
|Minimum orders: |None |
|Delivery time: |Refer to Items 1 - 4 |
|Payment terms: |1% 30 days |
|Shipping destination: |Free On Board (FOB) Destination. Original order FOB Tacoma Public Utility all other orders FOB Dealer. |
|Freight: |Prepaid and included in unit pricing |
|Contract pricing: |See pages Attachment “A” |
|Term worth: |$1,379,674.00 |
|Current participation: |$0.00 MBE |$0.00 WBE |$1,379,674.00 OTHER |$0.00 EXEMPT |
| |MBE 0% |WBE 0% |OTHER 0% |Exempt 0% |
| | |
Notes:
I. State Agencies: Submit Order directly to Contractor for processing. Political Subdivisions: Submit orders directly to Contractor referencing State of Washington contract number. If you are unsure of your status in the State Purchasing Cooperative call (360) 902-7415.
Only authorized purchasers included in the State of Washington Purchasing Cooperative (WSPC) listings published and updated periodically by OSP may purchase from this contract. It is the contractor’s responsibility to verify membership of these organizations prior to processing orders received under this contract. A list of Washington members is available on the Internet . Contractors shall not process state contract orders from unauthorized users.
Special Conditions:
1. Current Contract Information (CCI)
This Current Contract Information (Contract Change Notice 4) approves a price increase for Valley Freightliner. Pricing for vans and options are provided in Attachment “A” and specifications can be found under Section III, Specifications, Attachment “B”.
2. Certificate of Insurance
Contractor to furnish to the State Procurement Officer, a copy of a valid Certificate of Insurance listing the State as beneficiary (See Original Bid Document, Section II, Paragraph 1) within Fifteen (15) days after Contractor receipt of award notice.
3. Warranty
Bidder will submit a copy of warranty with items delivered under this contract. Unless otherwise specified, full parts and labor warranty period shall be for a minimum period of one (1) year after receipt of materials or equipment by the Purchaser. All materials or equipment provided shall be new, unused, of the latest model or design and of recent manufacture
In the event of conflict between contract terms and conditions and warranty submitted, to afford the state maximum benefits, the contract terms and conditions shall prevail.
4. PROGRAM MANAGEMENT REIMBURSEMENT
This contract is subject to an administrative fee of one and a half percent (1.5%) of contract sales. Awarded supplier(s) will remit payment of the administrative fee on a quarterly basis when submitting the quarterly sales and subcontractor report as defined herein. Payment is to be made to Department of Enterprise Services, Master Contracts and Consulting, and Contract 08206 and is not to be invoiced to any contract users, either as an item on a sales invoice, or by any other means. Any invoice issued to a user of this contract with the administrative fee included will be in dispute, and not paid until the supplier corrects it. Payment of the administrative fee will be due in conjunction with the quarterly sales and subcontractor report, delinquency in payment may be considered cause for contract termination.
5. Sales and Subcontractor Report
A quarterly Sales and Subcontractor Report (attached) shall be submitted in the format provided by the Office of State Procurement. You can get the report electronically
Total purchases for each State Agency, University, Community and Technical Colleges must be shown separately. Total purchases for all political subdivisions and non-profit organizations may be summarized as one customer. Additionally, all purchases by the State of Oregon or other purchasers must be reported as an aggregate total.
The report shall include sales information (Section A) and amounts paid to each subcontractor during the reporting period (Section B)
Reports should be rounded to nearest dollar. Contractors will be provided with all necessary sample forms, instructions, and lists. Reports are due thirty (30) days after the end of the calendar quarter, i.e., April 30th, July 31st, October 31st and January 31st.
6. Federal Funding Language
FEDERAL FUNDING
In the event that a federally funded acquisition results from this procurement, the contractor may be required to provide additional information (free of charge) at the request of the Purchasing Activity or purchaser: Further, the contractor may be subject to those federal requirements specific to the commodity.
FEDERAL RESTRICTIONS ON LOBBYING
Contractor certifies that under the requirements of Lobbying Disclosure Act, 2 U.S.C., Section 1601 et seq., no Federal appropriated funds have been paid or will be paid, by or on behalf of the contractor, to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with the awarding of any Federal contract, the making of any Federal grant, the making of any Federal loan, the entering into of any cooperative agreement, and the extension, continuation, renewal, amendment, or modification of any Federal contract, grant, loan, or cooperative agreement.
FEDERAL DEBARMENT AND SUSPENSION
The contractor certifies, that neither it nor its “principals” (as defined in 49 CFR. 29.105 (p) is presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation in this transaction by any Federal department or agency.
ATTACHMENT “A” PRICE SHEETS
|Item |Description |Unit Price |
| |WALK IN STEP VAN, 19,000 GVWR. Refer to Section 3.3, Bid Specifications |$81,659.00 |
| | | |
| |For Product Bid State: | |
| |Mfg.: 2007 Freightliner Custom Chassis Corp (Utilimaster Body) | |
| |Brand/Model: Freightliner Custom Chassis MT-45(Aeromaster Van Body) | |
| | | |
| |Lead-time: Materials, equipment or services will be delivered within calendar 180 days after | |
| |receipt of order (ARO). | |
| |180 Days for base van, 270 days for vans with high option content | |
| |ALTERNATE WALK-IN STEP VAN BODY- 19,000 GVWR |$79,784.00 |
| | | |
| |MORGAN OLSON BRAND VAN BODY (Not all cabinet options are available with Morgan Olson – See Dealer) | |
| |WALK IN STEP VA N, 25,500 GVWR. Refer to Section 3.3, Bid Specifications. |$84,365.00 |
| | | |
| |For Product Bid State: | |
| |Mfg.: 2007 Freightliner Custom Chassis Corp (Utilimaster Body) | |
| |Brand/Model: Freightliner Custom Chassis MT-55 (Aeromaster Van Body) | |
| | | |
| |Lead-time: Materials, equipment or services will be delivered within calendar 180 days after | |
| |receipt of order (ARO). | |
| |180 Days for base van, 270 days for vans with high option content | |
| |ALTERNATE WALK-IN STEP VAN BODY - 25,500 GVWR |$82,558.00 |
| | | |
| |MORGAN OLSON BRAND VAN BODY (Not all cabinet options are available with Morgan Olson – See Dealer) | |
| |Eaton Hybrid Low Profile Transmission, 340 VDC Battery and associated system Equipment – Eaton City |$42,962.00 |
| |Delivery System (MT-55 and MT-45) | |
| |Eaton Hybrid Low Profile Transmission, 340 VDC Battery and associated system Equipment – Eaton |$53,583.00 |
| |Utility System (MT-55 Only) | |
| |Eaton 5KW APG Inverter (Requires Utility System) (MT-55 Only) |$9,021.00 |
Above pricing does not include WA Sales Tax (if applicable to in-state purchasers). 1% prompt pay discount offered on invoice
Shipment: Vans will be driven from Wakarusa, IN. Purchaser Option: Ship by flatbed truck, (not driven) Add $ 2,576.02 per unit.
Exhaust after-treatment system located on passenger side ahead of the rear wheels. Diesel Exhaust Fluid (DEF) tank is on passenger side ahead of the rear wheels.
|Item 3: Option Price Sheets |
|Item # and Description | |Check | |Price in-lieu-of (ILO) or in-addition-to what is called |
|Item 3: Option Price Sheets | |To Select | |out in the base specifications as described in items 1 |
| | | | |and 2 of this IFB |
|Engine Horsepower Upgrades: | | | |F= Factory Installed L= Local Installed D=Dealer |
|240 HP | |a) | | |
|260 HP (Applies to Bid Item 2 only) | |b) | |$ 779.47 F |
|300 HP (Applies to Bid Item 2 for Fire & Emergency Vehicle Applications | |c) | |$ 2,238.11 F |
|only) | | | |$ 3430.65 F |
|Deduction for 2007 EPA engine, if available | |d) | | |
|Blue Stripe long life coolant hoses (may not be available for heater hoses).| | | |$ Will Advise, if available |
|Gas V-8 Engine – GM 6L 308HP – Selling dealer to provide detailed chassis | |e) | |$128.00 |
|specifications. Only available with Allison 1000 and 2000 series without PTO| | | | |
|capability. Vehicle chassis model will be a MT45G or MT55G. | | | |($14,583.00) |
| | |f) | | |
| | | | | |
| | | | | |
| | | | | |
|Alternator Upgrades: | | | | |
|200 Amp | |a) | | |
|270 Amp | |b) | |$290.47 F |
|Upgrade 270 Amp to 320 Amp (select both 2b & 2c) | |c) | |$585.82 F |
| | | | |$1,690.00 L |
|Battery Upgrades: | | | | |
|Three batteries 2,100 CCA | |a) | |$676.04 L |
|Four batteries 2,800 CCA | |b) | |$890.59 F |
|Battery isolator | |c) | |$391.61 L |
|Remote battery box with slides | |d) | |$1,134.39 F |
|Replace or supply with two “Odyssey” batteries or AGM series equal | |e) | |$440.94 (two) $881.88 (four) |
|Pos & Neg jump posts in RH stepwell | |f) | |$ 350.00 L |
|Battery charger – 45 Amp smart charger | |g) | |$ 395.00 F or L |
|Exhaust System Upgrades: | | | | |
|Exit aft of rear wheels – 190 In. WB+up | |a) | |$175.00 F |
|Left hand exhaust outlet – 178 or 190 WB | |b) | |$85.00 F |
|Cummins Turbo Brake | |c) | |$75.00 F |
|Regen inhibit switch, Data Code 28F-007 | | | |$ No charge F |
| | |d) | | |
| | | | | |
|Gross Weight Rating Downgrades: (Applies to Item 1 only) | | | | |
|14,000 Lb. GVWR | | | | |
|16,000 Lb. GVWR | |a) | |$(309.28) F |
|Other ____________________ | |b) | |$(309.28) F |
| | |c) | |$N/A |
|Gross Weight Rating Upgrades: (Applies to Item 2 only) | | | |F = Factory Installed L = Local Installed |
|27,500 Lb. GVWR | | | | |
|29,000 Lb. GVWR | |a) | |$181.81 F |
|Other ____________________ | |b) | |$401.23 F |
| | |c) | |$N/A |
|Transmission Upgrades: (Applies to Item 2 Only) All Trans: Subject to FCCC | | | | |
|approval. | | | | |
|Allison 2100 RDS (without parking pawl) for GVWR higher than 25,500 Lbs. | |a) | | |
|Allison 2500 RDS Wide Ratio (without parking pawl) for GVWR higher than | | | |$(267.00) F |
|25,500 Lbs. | | | | |
|PTO Enable and/or Neutral Signal relays wired to J-box for body builder | |b) | | |
|access. Included when a PTO is installed by the factory. | | | | |
|PTO Clearance Provision 363-011 | |c) | | |
|Allison 2100HS No PTO, No Park Pawl | | | |$(49.00) F |
|Allison 2500HS No PTO, No Park Pawl | | | | |
|Allison 2200HS No PTO, with Pawl | | | |$384.00 L |
|Allison 2100EVS No PTO, No Park Pawl | |d) | | |
|Allison 2500EVS With PTO, No Pawl | |e) | | |
|Allison 2200EVS With PTO, With Pawl | | | | |
| | |f) | |$122.00 F |
| | |g) | |$ (1009.00) F |
| | | | | |
| | |h) | |$ (445.00) F |
| | |i) | |$ (267.00) F |
| | | | | |
| | |j) | |$ (102.00) F |
| | | | |$ (19.00) F |
| | | | | |
| | | | |$ 281.00 F |
| | | | |EVS for fire/emergency only |
|Fuel Tank Upgrades: (May require a longer body length – seller will advise.)| | | | |
|60 gallon (between rails aft of rear axle) | | | | |
|40 gallon shallow tank for walk ramp | | | | |
|30 gallon (aluminum, aft of rear axle) | |a) | |$192.00 F |
|40 gallon (aluminum, aft of rear axle) | | | | |
|40 gallon (steel, aft of rear axle) | |b) | |$152.00 F |
|45 gallon LH aluminized steel | | | | |
|45G LH aluminum tank is in base bid | |c) | |($16.00) F |
|Auxiliary fuel ports is data code 599-001 and included in base bid. Not | | | | |
|available with all tanks. Seller will advise. | |d) | | |
|Fuel door may be located on the LH or RH side for rear mounted tank. Seller | |e) | |($ 4.00) F |
|will advise. | |f) | |($105.00) F |
|Gas engine must have 40 gallon between rails | | | | |
| | | | |$64.00 F |
| | | | | |
| | | | | |
|Tire/Wheel Upgrades | | | | |
|245/70R19.5 ILO 225/70R19.5 (Applies only to Item 1) | | | | |
|255/70R22.5 ILO 245/70R19.5 (Applies only to Item 2) | | | | |
|Spare tire and wheel (match front tread) | |a) | |$246.59 F |
|Polished Aluminum Front Wheels with Chrome Caps ILO painted steel wheels | | | | |
|Polished Aluminum Front and Rear Outer Wheels, steel inner wheels with | |b) | |$576.77 F |
|Chrome Caps ILO painted steel wheels | | | | |
|Polished Aluminum Front and Rear Outer and Inner wheels with Chrome Caps ILO| |c) | |$296.74 F Steel |
|painted steel wheels. | | | |$596.74 F Aluminum |
| | |d) | |$316.25 F |
| | | | | |
| | |e) | |$824.75 F |
| | | | | |
| | |f) | |$1,307.24 F |
|Body Size Upgrades (Chassis wheelbases will be corrected to what is | | | |F = Factory Installed L = Local Installed |
|available for the specific body length– and contractor will advise | | | | |
|purchaser): | | | | |
|93.5 In. width ILO 86.5 In. width (Applies only to Item 1) | | | | |
|12 Ft. cargo floor length ILO 14 Ft., (Applies only to Item 1) | |a) | |$315.43 F |
|13 Ft. cargo floor length ILO 14 Ft. (Applies only to Item 1) | |b) | |$(509.36) F |
|16 Ft. cargo floor length ILO 14 Ft. | |c) | |$(245.34) F |
|18 Ft. cargo floor length ILO 14 Ft. | | | | |
|20 Ft. cargo floor length ILO 14 Ft. | |d) | |$571.28 F |
|22 Ft. cargo floor length ILO 14 Ft. | |e) | |$1,155.41 F |
|24 Ft. cargo floor length ILO 14 Ft. (Applies to Item 2 Only) | |f) | |$1,776.93 F |
|26 Ft. cargo floor length ILO 14 Ft. (Applies to Item 2 Only) | | | | |
|30 Ft. cargo floor length ILO 14 Ft. (Applies to Item 2 Only) | |g) | |$2,333.03 F |
|81 In. interior height ILO 85 In. | |h) | |$2,976.74 F |
| | |i) | |$7,383.43 F |
| | | | | |
| | |j) | |$8,690.72 F |
| | |k) | |($ No Charge) |
| | | | |Morgan Olson no longer offers 24+ |
|Electric engine block heater 110-volt: | | | | |
|Receptacle located in bumper face | | | | |
|Receptacle located next to driver’s door | |a) | |$57.24 F |
|Receptacle located above bumper at rear | |b) | |$157.24 F |
|Wired to shore power plug with on/off switch for warm weather operations | |c) | |$184.12 F |
| | |d) | |$160.00 F |
| | | | |Options b to d: relocation of factory receptacle, which |
| | | | |require 11a also. |
|Bulkhead Options: | | | | |
|Solid bulkhead without sliding door ILO center sliding door | | | | |
|Screened bulkhead with sliding door ILO solid bulkhead with center door | | | |$(516.37) F |
|Delete bulkhead | |a) | | |
|2nd bulkhead to provide separate enclosed space for desk or other functions.| | | | |
| | |b) | |$ Will advise |
|Other: _______________________ | | | | |
| | |c) | |$ (975.50) F |
| | | | | |
| | |d) | | |
| | | | |$1,046.77 F |
| | |e) | | |
| | | | |$ N/A |
|Bulkhead Location Options: (Front mount Std.) | | | |F = Factory Installed L = Local Installed |
|Minus 8-In for set-back seat | | | | |
|Minus 1- 2 Ft. (Specify) | |a) | |$64.25 F |
|Minus 2 - 3 Ft. (Specify) | | | | |
|End of Door Pocket (39 In.) | |b) | |$64.25 F |
|Custom position (Specify) | | | | |
| | |c) | |$64.25 F |
| | |d) | |$64.25 F |
| | | | | |
| | |e) | |$164.25 F |
|Bulkhead Door Options: | | | | |
|Window in sliding door | | | | |
|Locking Handle (Specify if different key) | |a) | |$84.12 F |
|Deadbolt Lock (Different key than cab and ignition for security) | | | | |
|Other _____________________ | |b) | |$10.00 F |
| | | | | |
| | | | | |
| | | | | |
| | |c) | |$203.28 F |
| | | | | |
| | |d) | |$ N/A |
|Cab Door Window Options: | | | | |
|Sliding windows instead of roll-down type (required with 15b) | | | | |
|Lower RH door visibility window | |a) | |$(37.21) F |
|Safety Tread covering on entry steps (composite material over standard | | | | |
|diamond tread) | |b) | |$172.90 F |
|RH entry grab rail (price each, and then discuss with contractor) | | | | |
|Additional grab handles (price each, and then discuss with contractor) | | | | |
|Sedan style front doors ILO sliding type | | | | |
|Window in door pocket (advise which side). Typical use is for 3rd seat. Hard| | | | |
|to clean. | | | | |
| | |c) | |$188.09 F |
| | | | | |
| | | | | |
| | | | | |
| | |d) | |$631.00 F (Grab Rail System) |
| | | | | |
| | | | | |
| | | | | |
| | |e) | |$17.00 Each F |
| | | | | |
| | |f) | |$271.20 F |
| | | | | |
| | | | |$182.00 F |
| | |g) | | |
|Cab Electrical Options: | | | | |
|AM/FM radio without CD player | | | | |
| | |a) | |$(86.45) F |
|Delete radio and speakers entirely | | | | |
|Hobbs hour meter (Price each, then advise contractor what function is | |b) | |$ _______ |
|desired: Engine hours, PTO hours, etc.) | | | | |
|Cigarette lighter and ash tray (In addition to (2) 12-volt cigar lighter | | | | |
|style receptacles as called out in base Specs.) | |c) | |$ (322.44) F |
|110 Volt outlet at front for laptop charger. (Wired to generator or inverter| | | | |
|system) | | | | |
|Two additional speakers in cargo area – specify location desired. Wired to | | | | |
|radio fader (rear speakers) circuit. | | | | |
|Hobbs hour meter Model 98310, oil pressure controlled for engine hours | | | | |
|3rd 12-volt cigar lighter. May be grouped as a 3-receptacle unit and mounted| |d) | |$199.77 F Each $368.56 L Each |
|on a separate bracket below the dash center. Two receptacles are in base | | | | |
|bid. | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |e) | |$42.06 F |
| | | | | |
| | | | | |
| | | | | |
| | |f) | |$85.28 F $201.57 L |
| | | | | |
| | | | | |
| | | | | |
| | |g) | |$141.00 F |
| | | | | |
| | | | | |
| | |h) | |$250.00 F |
| | | | | |
| | | | | |
| | |i) | |$30.00 F |
| | | | | |
|Cab Floor Options: (Sound deadening floor is in base Specs.) | | | |F = Factory Installed L = Local Installed |
|Safety Tread covering ILO sound deadening covering. | | | | |
|Ribbed rubber mat ILO of sound deadening floor covering. | | | | |
|No floor covering (will be standard aluminum with tread plate in certain | |a) | |$515.20 F |
|areas.) | | | | |
| | | | | |
| | |b) | |$(165.89) F |
| | | | | |
| | |c) | |$(372.68) F |
|Cab HVAC and Venting Options: (Air conditioning is included in base Specs.) | | | |F = Factory Installed L = Local Installed |
|No air conditioning system (priced as deduct) | | | | |
|Single auxiliary fan (Price, then advise contractor if low or high mount is | | | | |
|desired.) | |a) | |$(747.69) F |
|Dual auxiliary fans (Price, then advise contractor if low or high mount is | | | | |
|desired.) | | | | |
|Right hand cowl vent (Salem butterfly style vent) if Left is standard or in | | | | |
|base. | |b) | |$72.43 F |
|Left and right hand cowl vents (Salem butterfly style vents) if none are in | | | | |
|base. | | | | |
|Auxiliary cab heater (Price, then discuss with contractor desired location | | | | |
|of heater) | |c) | |$140.19 F |
|Other: Heavy duty Red Dot heater | | | | |
| | | | | |
| | | | | |
| | |d) | |$ N/A |
| | | | | |
| | | | | |
| | | | | |
| | |e) | |$59.58 F |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |f) | |$353.98 F |
| | | | | |
| | |g) | |$ 1.140.09 L |
| Lighting and Visibility Aids: | | | | |
|Shade band on front windshield | | | | |
|Step Well light, driver side | |a) | |$136.69 F |
|Step Well lights, both sides | | | | |
|Two Weldon 1010 incandescent lights ILO single LED recessed. | |b) | |$52.57 F |
|Timer for cab dome lights | | | | |
| | |c) | |$105.14 F |
| | | | | |
| | | | | |
| | | | | |
| | |d) | |($198.61) |
| | | | |$ 275.00 |
| | |e) | | |
| | | | | |
|Safety Equipment: | | | |F = Factory Installed L = Local Installed |
|First Aid Kit 10-unit type (Typically located on forward face of bulkhead. | | | | |
|Price, then discuss with contractor if alternate location is desired.) | | | | |
|Fire Extinguisher 2.5# ABC (Typically located on forward face of bulkhead. | | | | |
|Price, then discuss with contractor if alternate location is desired.) | | | | |
|Price, then discuss with contractor if alternate location is desired.) | | | | |
|Safety Flares (Typically located in storage tube on face of bulkhead or on | | | | |
|floor next to or behind driver seat. Price, then discuss with contractor if | | | | |
|alternate or special location is desired.) | |a) | |$65.42 Basic 10-unit |
|Triangle Reflector Kit (Typically located on floor next to or behind driver | | | |$126.00 Weatherguard deluxe with #8876 tray and eye wash |
|seat. Price, then discuss with contractor if alternate or special location | | | |bottle. |
|is desired.) | | | | |
|Clipboard and accessories for wall map, rear wall | | | | |
|Whiteboard, 30H x 36W, specify location | | | | |
| | | | |$45.56 F 2,5# |
| | | | |$95.00 F 5.0# |
| | | | |$172.00 F 10# |
| | | | | |
| | | | | |
| | |b) | | |
| | | | | |
| | | | | |
| | | | |$63.09 F |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |c) | | |
| | | | |$57.24 F |
| | | | | |
| | | | | |
| | | | |$39.00 F |
| | | | |$125.00 F |
| | | | | |
| | | | | |
| | | | | |
| | |d) | | |
| | | | | |
| | | | | |
| | | | | |
| | |e) | | |
| | | | | |
| | |f) | | |
|Seating Options: (Included in base Spec. are two high back air-ride seats.) | | | | |
|Air ride driver side only, non-suspension passenger seat. Mechanical | | | | |
|suspension also available with non-Susp. Pass. Seat. | | | | |
|Air ride or mechanical driver side, 2-person non-suspension forward facing | | | | |
|passenger seat. (Bulkhead will change to offset sliding door unless solid | |a) | |$(396.04) F |
|bulkhead option is also specified. Allow for walk space when laying out | | | | |
|cabinets and shelves. | | | | |
| | |b) | |$362.16 F |
|2-person rear bench seat plus two front seats. 2-person bench is flip-down | | | | |
|forward facing style and generally requires bulkhead location of Minus | | | | |
|39-In. (EOP) | | | | |
|Additional non-suspension seat, front facing. Purchaser to specify quantity | | | | |
|and location, left, right or both. | | | | |
|Flip-up passenger jump seat | | | | |
|Vinyl seat covering ILO “Cordura” cloth | | | | |
|Orange belts included for forward seats, black belt set for rear or | |c) | |$1,847.03 F |
|flip-down seats. Black belt sets can be specified for all seats. | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |d) | | |
| | | | |$549.08 F |
| | |e) | | |
| | | | |$(150.00) F |
| | |f) | | |
| | | | |$(45.56) F |
| | | | | |
|Table, Trays and Cab Storage Options: | | | |F = Factory Installed L = Local Installed |
|Full width overhead compartment with doors ILO standard overhead shelf. | | | | |
|Aluminum storage box with hasp located on cab floor, passenger side tow | | | | |
|board. Approximately 12x12 for personal gear, etc. | |a) | |$170.57 F |
|Delete worktable in front of passenger seat | | | | |
|Worktable for laptop with hinged top and storage for papers. | | | | |
|Complete console on passenger side with laptop table, slide-out table and | | | | |
|drawer unit | | | | |
|Ribbed rubber top for any table or workstation above | | | | |
| | |b) | |$84.12 F |
| | | | | |
| | | | | |
| | | | | |
| | |c) | |$(95.00) F |
| | | | | |
| | | | | |
| | | | |$315.00 F |
| | |d) | | |
| | | | | |
| | | | | |
| | | | |$1,250.00 F |
| | |e) | | |
| | | | | |
| | | | |$10.00 w/o clips |
| | |f) | |$20.00 with two clips |
|Cargo Floor Options (Center aluminum tread plate with tread plate full width| | | | |
|aft of wheel wells is in base Spec.) | | | | |
|No floor tread plate (deduction in price) | | | | |
|Ribbed rubber floor mat center isle only ILO tread plate | | | | |
|Ribbed rubber floor mat covering whole cargo area ILO tread plate | |a) | |$(488.33) F |
|Tread plate over entire cargo floor | | | | |
|Tread plate applied to sides of wheel wells for additional protection | | | | |
|Non-skid paint applied to top of tread plate (or down center isle if option | | | | |
|a) is selected.) | |b) | |$(315.43) F |
|Safety Tread composite down center isle ILO aluminum tread plate | | | | |
|Rubber tread plate overlay in forward section. | | | | |
|“Rhino”, “Line-X” (or equal) sprayed on floor lining down center and across | | | | |
|back | |c) | |$(122.67) F |
|1/8 In. steel tread plate in rear section in-lieu of aluminum for heavy duty| | | | |
|use. | |d) | |$92.29 F |
|Heavy duty diamond pattern rubber flooring in-lieu-of aluminum diamond | | | | |
|plate. Complete floor except where cabinets/bench is on the floor. Includes | | | | |
|aluminum nosing. | | | | |
| | |e) | |$105.14 F |
| | | | | |
| | | | | |
| | | | | |
| | |f) | |$266.36 F |
| | | | | |
| | | | | |
| | | | | |
| | |g) | |$(32.71) F |
| | | | | |
| | | | | |
| | | | |$(150.71) F |
| | |h) | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$1,577.16 L or F |
| | |i) | | |
| | | | | |
| | | | | |
| | |j) | |$720.39 L |
| | | | | |
| | | | | |
| | | | |$400.00 F |
| | | | | |
| | |k) | | |
|Cargo Area HVAC and Ventilation Options: | | | | |
|Auxiliary cargo area heater, standard capacity single fan (Price, then | | | | |
|discuss with contractor desired location of heater) Make/Model# __________ | | | |F = Factory Installed L = Local Installed |
|Auxiliary cargo heater, high capacity dual fan (Price, then discuss with | |a) | | |
|contractor location of heater) Make/Model# ___________________ | | | |$362.16 F |
|Salem butterfly style side or top vents (Price each, then discuss with | | | | |
|contractor desired location and # of vent(s)) | | | | |
|Additional roof vents with fan (single roof vent with 12-volt fan is | |b) | | |
|included in base Spec). Price each, then discuss with contractor location of| | | | |
|vent(s). | | | | |
|Delete powered roof vent. | | | |$476.65 F |
|12-In. Skylight (for use with metal roof) without vent feature. | | | | |
|Positive Pressure System (Price, then discuss with contractor available | |c) | | |
|mounting locations of the system.) | | | | |
|Diesel fired engine coolant heater, Webasto model TSL17. | | | | |
|Roof mounted 110-volt RV HVAC Unit – Typically uses a generator or hybrid | | | |$57.24 F Each |
|inverter for power. Can be tied to the shore power for stationary | | | | |
|operations. | | | | |
|High capacity Espar #D8LC diesel fired heater with clock for setting | |d) | | |
|start-stop and temperature. Auxiliary cooling unit with engine mounted AC | | | | |
|compressor. Ordering dealer to apply codes 130-024 (2nd compressor) and | | | |$303.75 F Each |
|599-001 (auxiliary fuel tank ports) to the chassis order. | | | | |
|12-volt receptacles in the cargo area | |e) | | |
|Roof vent can be ordered side mounted for additional clearance. | | | | |
| | | | |$ (303.75) F |
| | | | | |
| | |f) | | |
| | | | | |
| | | | |$91.12 F |
| | | | | |
| | | | | |
| | | | | |
| | |g) | | |
| | | | |$792.08 F |
| | | | | |
| | |h) | | |
| | | | |$991.86 F 1,770.26 L |
| | | | | |
| | | | | |
| | |h) | | |
| | | | |$609.00 F |
| | |i) | | |
| | | | |$657.02 F Each |
| | | | | |
| | | | | |
| | |j) | | |
| | | | |$7,615.00 F |
| | | | | |
| | | | | |
| | |j) | | |
| | | | |$72.00 F Each |
|Cargo Area Storage Cabinet Options. The only cabinets being quoted in Contract Amendment 3 are aluminum due to the popularity. The selling dealer can still |
|provide pricing for steel or wood cabinetry on a separate letter if desired. (Discuss with seller.) Aluminum cabinets have heavy duty drawers (commercial |
|grade) with 100-250 Lb. capacity roller slides (depending on size and function), external finger pull or one-hand operated latches on each drawer, 14-16 gauge |
|construction. All cabinets and drawer units are designed to attach to the wall and floor using the grid mounting system (if so ordered) and included in the |
|base bid Spec.; however, they can be permanently attached to the wall and floor if the option to delete the grid system is selected. Price is per cabinet, then|
|discuss with contractor to determine location within the cargo area who will in-turn provide a layout sketch for approval by the purchaser. Aluminum cabinets |
|are not painted. If painted cabinets are desired, the selling dealer will provide a quote on a separate letter. Note: Dimensions are “Nominal” as there are |
|variances between manufacturers or the user may have specific heights and widths to meet their desired layout of the interior. |
|Note 1 - The pricing is for cabinet units within the dimensional range shown. Larger cabinet unit pricing will be upgraded using a multiplication of the base |
|price. For instance, a cabinet twice as wide with be multiplied by a factor of 2.0. One and half wider will be 1.5, and so on. It’s impractical to price every |
|shelf and cabinet size that may be available. Thus, on the option worksheet that will be prepared by the seller, you may see these values along with a note on |
|how it was determined to price that particular cabinet. |
| |
|Note 2 – For pre-determined cabinet packages, based on previous customer builds, go to 25z for pricing and have the dealer provide the appropriate Adobe PDF |
|drawing set that matches the layout you’re seeking or have been recommended to consider. |
| |
|Standard 6-7-Drawer unit, floor mounted, 24 In. wide x 34-40 In. high x | | | | |
|18-24 In. deep. Bottom drawer is 6 In. high, then four 4 In. high, then the | | | |F = Factory Installed L = Local Installed |
|top drawers are 3 In. high. Price each, then purchaser to specify desired | | | |$2726.00 Ea. 18-In. Deep |
|size, quantity and if a rubber mat and divider set is desired. | |a) | |$3,544.00 Ea. 24-In. Deep |
|Short 4-6 Drawer unit, (typically mounted on top of wheel well, which is 10 | | | |Add Drawer & Height: $454.00 Ea. |
|In. high x 40 In. wide), 40 In. wide x 22-28 In. high x 18-24 In. deep. | | | |Rubber drawer mats: $150.00 |
|Bottom three drawers are 4 In. high, then one 3 In. high. Price each, then | | | |Dividers: $150.00 set. |
|purchaser to specify quantity and if rubber mat and dividers are desired. | | | |Specify if parallel or perpendicular to cabinet front or |
|Standard open pocket bin unit, floor mounted, 24 In. wide x 34-40 In. high x| | | |egg-carton. |
|18-24 In. deep. 10 In. wide x 8 In. high pockets with 2 In. front lip (or | | | |L or F |
|evenly spaced). Price each, then purchaser to specify quantity and if rubber| | | | |
|mat is desired. Other lining, such as Rhino, can be quoted on a separate | |b) | |$2,399.00 Ea. 18-In. Deep |
|letter. | | | |$3,119.00 Ea. 24-In. Deep |
| | | | |Rubber drawer mats: $100.00 |
|Tall open pocket bin unit, floor mounted, 24 In. wide x 60-72 In. high x | | | |Dividers: $100.00 set. |
|18-24 In. deep. 10 In. wide x 8 In. high pockets with 2 In. front lip (or | | | |Specify if parallel or perpendicular or egg-carton. L or F|
|evenly spaced). Price each, then purchaser to specify quantity and if rubber| | | | |
|mat is desired. Other lining, such as Rhino, can be quoted on a separate | | | |Note - |
|letter. | | | |2 and 3 drawer units same carcass size typically are the |
| | | | |same price. |
| | | | | |
| | | | |$1,888.00 Ea. 18-In. Deep |
| | | | |$ 2,554.00 Ea. 24-In. Deep |
| | |c) | |Rubber floor mats: $75.00 set |
| | | | |Taller front lips (3-4-In.): $75.00 |
| | | | |L or F |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$2,051.00 Ea. 18-In. Deep |
| | | | |$2,666.00 Ea. 24-In. Deep |
| | | | |Rubber floor mats: $100.00 |
| | |d) | |Taller front lips (3-4-In.): $100.00 |
| | | | |Rubber floor mats: $100.00 set |
| | | | |L or F |
|Short pocket bin unit, (typically mounted on top of wheel well, which is 10 | | | | |
|In. high x 40 In. wide), 40 In. wide x 18-30 In. high x 18-24 In. deep. 10 | | | | |
|In. wide x 8 In. high pockets with 2 In. front lip (or evenly spaced). Price| | | |$1,810.00 Ea. 18-In. Deep |
|each, then purchaser to specify quantity and if rubber mat is desired. Other| | | |$2,353.00 Ea. 24-In. Deep |
|lining, such as Rhino, can be quoted on a separate letter. | |e) | |Rubber floor mats: $50.00 |
|Standard shelf unit, 34-40 In. high x 24 In. wide x 18-24 In. deep, three | | | |Taller front lips (3-4-In.): $50.00 |
|moveable shelves on adjustable track with 1-2 In. front lip. Price each, | | | |L or F |
|then purchaser to specify other options desired. | | | | |
| | | | | |
| | | | |$1,795.00 Ea. 18-In. Deep |
| | | | |$2,333.00 Ea. 24-In. Deep |
|Tall Shelf unit, 60-72 In. high x 24 In. wide x 18-24 In. deep, six moveable| | | |Taller front lips (3-4-In.): $50.00 |
|shelves on adjustable track with 1-2 In. front lip. Price each, then | | | |Rubber shelf mats: $50.00 |
|purchaser to specify other options desired. | |f) | |Dividers: $50.00 set. |
| | | | |Doors: $495.00 |
| | | | |Specify if locking or non-lock handles. |
|Tall Shelf Combo unit, 60-72 In. high x 24 In. wide x 18-24 In. deep, four | | | |L or F |
|moveable shelves on adjustable track with 1-2 In. front lip and 24 In. high | | | | |
|cabinet at top with doors and a single adjustable shelf. Price each, then | | | | |
|purchaser to other options desired. | | | |$2,513.00 Ea. 18-In. Deep |
| | | | |$3,266.00 Ea. 24-In. Deep |
|Short shelf unit, (typically mounted on top of wheel well, which is 10 In. | | | |Taller front lips (3-4-In.): $100.00 |
|high x 40 In. wide), 24-30 In. high x 40 In. wide x 18-24 In. deep, one or | | | |Rubber shelf mats: $100.00 |
|two moveable shelves on adjustable track with 1-2 In. front lip. Price each,| | | |Dividers: $100.00 set. |
|then purchaser to specify other options desired. | |g) | |Full Doors: $1,101.00 |
|Cabinet doors for shelf units. Price each (single or pair depending on | | | |Specify if locking or non-lock handles. Vents available |
|design), then purchaser to specify which units get the doors. | | | |also. |
|Standard Locker Unit with door. 12 In. wide x 60-72 In. high x 18-24 In. | | | |L or F |
|deep with one fixed shelf and two to four clothes hooks. Hasp or keyed lock | | | | |
|required. Purchaser to advise if perforated doors are required. | | | |$2,815.00 Ea. 18-In. deep |
| | | | |$3,660.00 Ea. 24-In. deep |
| | | | |Taller front lips (3-4-In.): $100.00 |
| | |h) | |Rubber shelf mats: $100.00 |
| | | | |Dividers: $100.00 set. |
| | | | |L or F |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$1,335.00 Ea. 18-In. deep |
| | | | |$1,735.00 Ea. 24-In. deep |
| | | | |Taller front lips (3-4-In.): $50.00 |
| | | | |Rubber shelf mats: $50.00 |
| | | | |Dividers: $50.00 set. |
| | | | |Full Doors: $495.00 |
| | |i) | |Specify if locking or non-lock handles. Vents available |
| | | | |also. |
| | | | |L or F |
| | | | | |
| | | | |Price shown for shelf units above. If for a different |
| | | | |cabinet, selling dealer can quote as a note on the order. |
| | | | | |
| | |j) | |$2,011.00 Ea. 12Wx72Hx18D |
| | | | |$2,950.00 Ea. 18Wx72Hx18D |
| | | | |$3,950.00 Ea. 24Wx72Hx18D |
| | | | |$2,750.00 Ea. 24Wx48Hx18D |
| | | | |24-In. deep ILO 18-In. Add $250 |
| | | | |Vented doors $50.00 |
| | | | |Hanger Rod $50.00 |
| | |k) | |L or F |
|Long cabinet (typically located above work bench) 12-18 In. high x 48 In. | | | |$3,091.00 Ea. 48-In. Long |
|long x 12-16 In. deep with doors. To include 1 shelf with adjustable track. | |l) | |$4,018.00 Ea. 60-In. Long |
|Price each, then purchaser to specify direction of the door swing (out or | | | |Vented doors $50.00 |
|up) and location. | | | |Light under cabinet: $75.00 |
|Standard small parts bin unit, 24 In. wide x 34-40 In. high x 12-18 In. | | | |L or F |
|deep. Individual pull-out bins, approximately 4 In. wide x 4 In. high with 4| | | |Usually built with double doors. |
|adjustable dividers per bin for sub-divider slots. Bins are plastic | | | | |
|construction and the carcass and shelves are aluminum. The purchaser can | | | | |
|specify how many plastic bins and the sizes needed for their inventory. | | | | |
|(Will need depth and width.) | | | | |
|Tall small parts bin unit, 24 In. wide x 60-72 In. high x 12-18 In. deep. | | | |$1,722.00 Ea. 12-18 Deep |
|Individual pull-out bins, approximately 4 In. wide x 4 In. high with 4 | | | |24 Deep add $250.00 |
|adjustable dividers per bin for sub-divider slots. Bins are plastic | | | |This is basically a short shelf unit with plastic |
|construction and the carcass and shelves are aluminum. The purchaser can | |m) | |removable bins. |
|specify how many plastic bins and the sizes needed for their inventory. | | | |Additional plastic bins and larger shelf size can be |
|(Will need depth and width.) | | | |factored accordingly. |
|Short small parts bin unit, (typically located on top of wheel box) 40 In. | | | |L or F |
|wide x 20-30 In. high x 18-24 In. deep. Individual pull-out bins, | | | | |
|approximately 4 In. wide x 4 In. high with 4 adjustable dividers per bin for| | | | |
|sub-divider slots. Bins are plastic construction and the carcass and shelves| | | | |
|are aluminum. The purchaser can specify how many plastic bins and the sizes | | | | |
|needed for their inventory. (Will need depth and width.) | | | | |
| | | | | |
| | | | |$2,192.00 Ea. 12-18 Deep |
| | | | |This is basically a tall shelf unit with plastic removable|
| | | | |bins. |
| | |n) | |Additional plastic bins and larger shelf size can be |
| | | | |factored accordingly. |
| | | | |L or F |
| | | | | |
| | | | | |
| | | | |$1,922.00 Ea. 18 Deep |
| | | | |$2,498.00 Ea. 24 Deep |
| | | | |This is basically a short and wide shelf unit with plastic|
| | | | |removable bins. |
| | | | |Additional plastic bins and larger shelf size can be |
| | | | |factored accordingly. |
| | |o) | |L or F |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |F = Factory Installed L = Local Installed |
|Comfort station. RV style toilet with ceramic bowl, foot operated flush | | | | |
|starts a 12-volt pump, below the floor mounted and vented holding tank | | | | |
|(approximately 15-20 gallons) and RV discharge hose connections. Access door| | | | |
|in body skirt for standard discharge hose hook up. 10-gallon fresh water | | | | |
|tank with vent and fill spout. Fresh water tank and pump to have drain | | | | |
|valves for winter storage or cold weather operations. | | | | |
|Full enclosure, rectangular or polygon shaped footprint, 31 In. wide x 85 | | | | |
|In. high x 31 In. deep allowing a minimum of 26 In. hip socket to front wall| | | | |
|when seated at the head. The door shall be positioned so the user can stand | | | | |
|and undo their clothes in privacy. No cracks or loose joints allowed for | | | | |
|privacy. (A gasket at the top of the walls to fill the gap at the ceiling is| | | | |
|allowable.) There shall be a powered roof or high mounted side vent and | | | | |
|12-volt interior light, both on a timer switch. Toilet paper holder for two| | | | |
|rolls. The enclosure shall be covered with a durable and washable laminate | | | | |
|such as “Kimlite” or bare aluminum metal. The floor shall have a durable and| | | | |
|washable seamless covering or coating, such as rubber tread plate. The 24 | | | | |
|In. wide x 72 In. high door shall have an outside handle, inside locking | | | | |
|latch and double-wall construction or design that doesn’t flex easily. | | | | |
|Seller to provide sketch of enclosure showing actual dimensions with door | | | | |
|and head location with this proposal for verification by purchaser. A sink | | | | |
|is sold separately. See 25q. | | | | |
|Sink and washing station. Separate and outside of the comfort station. Small| | | | |
|stainless steel RV sink with 12-volt on-demand pump. 10-20 gallon potable | | | | |
|(fresh) and a gray (waste) water tank (if comfort station option is not | | | | |
|selected) holding tanks with external fill and discharge outlets. The fresh | | | | |
|water tank shall have back-flow prevention. Priced | |p) | |$6,674.00 Ea. |
|separately: A small 110-volt powered RV type hot water tank, approximately | | | |F or L |
|5-gallon capacity, with adjustable thermostat set to OSHA standard and | | | | |
|marked. Interlock system to shut off hot water tank when fresh water tank is| | | |Installation most likely local, but they are sometimes |
|empty. Hot water tank shall be connected to the shore power system and/or | | | |done some at the factory. |
|generator if equipped with a shore power transfer switch. Paper towel and | | | | |
|liquid soap dispensers conveniently located. | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |q) | |Cold Water Only |
| | | | |$1,645.00 Ea. (when ordered without the comfort station.) |
| | | | |$1,145.00 Ea. (when ordered with comfort station 25p.) |
| | | | | |
| | | | | |
| | | | | |
| | | | |Cold and Hot Water |
| | | | |$3,645.00 Each (when ordered without comfort station) |
| | | | |$3,125.00 Each (when ordered with comfort station) |
| | | | | |
| | | | |Installation most likely local, but with have done some at|
| | | | |the factory. |
|Standard work bench shall be 48’’, Designed to be on top of drawer or shelf | | | | |
|units or with separate legs and framework, depending on what is needed. | | | | |
|Plywood with hardwood veneer or Hardwood laminate top. | |r) | |$ 595.00 Ea. For 4-Ft. Bench |
|Heavy duty work bench shall be 48’’ Designed to be on top of drawer or shelf| | | |$ 42.00 For each additional Ft. |
|units or with separate legs, depending on what is needed. 1 In. plywood or | | | | |
|laminated hardwood core with 10 gauge steel top rolled down at the front and| | | |F or L |
|up at the rear. Priced per lineal foot beyond 48’’ and then purchaser to | | | | |
|specify height (34 to 43 In.), quantity and location. | | | | |
|Vice: 5 to 6 In. heavy duty. Purchaser must specify option s) to provide | |s) | |$695.00 Ea. For 4-Ft. Bench |
|vice mounting surface. | | | |$77.14 For each additional Ft. |
|Vice: 4 In. standard duty. Purchaser must specify option r) or s) to provide| | | | |
|vice mounting surface. | | | |F or L |
|Oxygen and Acetylene bottle holder. Floor mounted pockets with upper straps | | | | |
|and hook for hoses. Price for set, then purchaser to specify size of their | | | | |
|bottles and location. | | | | |
|Screw and nut tray style storage system: Module with eight removable trays | | | | |
|with lids on roller slide carriers. 12-In. high x 12-24-In. wide x 12-18 In.| | | | |
|deep. Typically located on top of work bench or cabinet. Include master lock| |t) | | |
|strap or similar anti-slide system. Price for one module, then purchaser | | | |$189.60 Ea. Jaw Vice |
|will specify quantity and location. | | | |$ 225.00 Ea. Chain Vice |
|Desk and workstation 18 to 24-In deep, 36 to 48-In. wide with or without | | | |(Seller to identify make and model at time of sale.) |
|file cabinet and drawer. A low-profile basic office chair and bungee | |u) | |$155.00 Ea. F |
|restraint will be provided. Aluminum with hardwood top. | | | |Seller to identify make and model |
|Heavy steel overlay on top of cabinet for machine tool mounting (such as | | | | |
|drill press, etc.). | | | | |
| | | | | |
|Cabinet Packages (Selling dealer to provide the appropriate sketch in Adobe | |v) | |$ 1,068.81 Each Steel |
|PDF of these pre-determined cabinet packages, based on previous customer | | | | |
|builds.) These packages simplify the ordering and documentation process and | | | | |
|should be used where practical, as they save as much as 10% over | | | | |
|individually selected cabinets! These packages are for the interior cabinet | | | | |
|set only. All other options shall be selected individually, such as exterior| | | | |
|lighting, generator, external cabinets, bumper, Etc. The forward workstation| | | | |
|22e, if selected, is not included in these cabinet packages, nor is the | | | | |
|comfort station 25p. These are also priced separately if desired. | |w) | | |
|Note: Cabinets, bins and shelf units can often be built as combination units| | | |$592.00 Each Steel |
|that share the same carcass. Purchaser to price individual modules then call| | | | |
|out in a note that those units will be “combined”. The manufacturer will try| | | | |
|to accommodate this request where practical. | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |x) | | |
| | | | |$500.00 Basic Desk |
| | | | |$750.00 Desk with Drawer |
| | | | |$950.00 Desk with Drawer and Side filing cabinet. |
| | | | | |
| | | | | |
| | | | | |
| | |y) | |$200.00 |
| | | | | |
| | | | | |
| | |z) | |Drawing File # Package Price |
| | | | |31910-DS2-PS2 $ 20,913.00 |
| | | | |47015-DS1-PS1 $ 29,105.00 |
| | | | |47015-DS2-PS2 $ 29,236.00 |
| | | | |47015-DS3-PS3 $ 14,557.00 |
| | | | |47015-DS4-PS4 $ 24,339.00 |
| | | | |47015-DS5-PS5 $ 18,553.00 |
| | | | |47015-DS6-PS6 $ 20,365.00 |
| | | | |47015-DS7-PS7 $ 23,323.00 |
| | | | |48008-DS10-PS10 $ 21,032.00 |
| | | | |48008-DS11-PS11 $ 9,422.00 |
| | | | |48008-DS12-PS12 $ 14,765.00 |
| | | | |48008-DS8-PS8 $ 22,157.00 |
| | | | |48008-DS9-PS9 $ 26,399.00 |
| | | | |48021-DS2-PS3 $ 43,907.00 |
| | | | |48026-DS2-PS3 $ 22,807.00 |
| | | | |49034-DS1-PS1 $ 25,495.00 |
| | | | |49034-DS2-PS2 $ 25,504.00 |
| | | | |49034-DS5-PS5 $ 26,161.00 |
| | | | |49976-DS1-PS1 $ 20,118.00 |
| | | | |49976-DS2-PS2 $ 20,871.00 |
| | | | |49976-DS3-PS3 $ 21,716.00 |
| | | | | |
| | | | |DS = Driver Side (Street Side) |
| | | | |PS = Passenger Side (Curb) |
| | | | | |
| | | | |Comfort Station 25p and Wash Basin 25q is not priced in |
| | | | |above packages – sold as separate item. |
| | | | | |
| | | | |Forward workstation 22e is not priced in above packages – |
| | | | |sold as separate item. |
| | | | | |
| | | | |Exterior cabinets, interior and exterior lighting and |
| | | | |reels are not priced in above packages – sold as separate |
| | | | |items. |
| | | | | |
| | | | |Reference drawings located in Adobe PDF Portfolio file ID:|
| | | | |08206 Cabinet Package Drawings Mar 2011 |
|Sidewall Construction Options: Included in the base Spec. is a grid type | | | | |
|mounting system for cabinets, shelves, etc. that allows maximum flexibility | | | | |
|and future moving or addition of cabinets, shelves, etc. This includes | | | | |
|lining and insulation. The following options allow the vehicle to be | | | | |
|converted for other purposes. | | | | |
|Delete grid mounting system, interior walls and insulation. | | | | |
|Plywood walls with insulation, no grid mounting system. | | | | |
|Plywood walls with “Kimlite” (or equal) washable laminate and insulation, no| | | | |
|grid mounting system. | | | | |
|Series E tie down track. Priced per lineal foot. Purchaser to specify | | | | |
|length, height (from floor) and location. | | | | |
|Wall studs on 16-In. spacing instead of 24-In. spacing. | |a) | |($1,335.00) F (No items) |
|Cargo area sliding side window | | | |($350.00) F Surface Mtd Grid |
|Exterior sidewall mounted Power Strut, positioned in grid pattern to attach | | | | |
|ladder hooks, Etc. No attachments or fasteners are provided. | |b) | |($780.00) F |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |c) | |($455.00) F |
| | | | | |
| | | | | |
| | | | | |
| | |d) | |$20.00 F Price per foot |
| | | | | |
| | | | | |
| | |e) | |$239.49 F |
| | | | | |
| | |f) | |$436.93 F |
| | | | | |
| | |g) | |$690.00 2-sides F |
| | | | |$345.00 1-side F |
|Miscellaneous: | | | |F = Factory Installed L = Local Installed |
|Spare tire carrier (located inside on wall) | | | | |
|Under-the-floor extendable aluminum walk ramp. Requires shallow fuel tank. | | | | |
|Back-up camera :Safety Vision” or equal with CRT or flat LCD color monitor. | |a) | |$75.94 F |
|External ladder holder for 22-Ft. extension ladder | | | | |
|Internal ladder pocket for 24 to 28-Ft. extension ladder, depending on body | | | |$803.77 F (Solid – MT45 Only) |
|length | |b) | |$908.50 F (Grated –MT45 Only) |
|Standard rear differential ILO locking type | | | | |
|Stylized hood with chassis manufacturer supplied grille and bumper | | | |$1,038.59 F (Color LCD) |
|Swing-Out side mounted pipe holder | |c) | |$497.95 F (B&W CRT) |
|Under or above floor holding tank for water or cleaning solutions, | | | | |
|wash-down, Etc., approximately 30-50 gallons, depending on available space. | | | |$502.35 F |
|Price each, then purchaser to specify what liquid will be in the tank, | |d) | | |
|approximate location and advise pump and dispensing equipment (which will be| | | |$1,647.25 (with sep. rear door) |
|priced on a separate letter at the time of the order). | | | |$721.85 (with roll-up door) |
|Basic wire spool holder | |e) | | |
|Spring rear suspension, tapered leaf with shocks, ILO air suspension. | | | | |
|(Applies to bid item #2 only.) | | | | |
|Torsion bar for front suspension. Requires 10K front axle and suspension. | |f) | |($696.58) F |
|(Applies to bid item #2 only.) | | | | |
|High profile rear suspension for improved ground clearance. (Applies to bid | | | |$667.08 F (Painted Grille/Bump) |
|item #1 only.) | |g) | |$994.25 F (Chrome Grille/Bump) |
| | | | | |
| | | | |$544.50 L |
| | | | | |
| | |h) | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$1,125.00 tank only |
| | | | |$1,425.00 tank & 12v pump |
| | | | |$1,825.00 with 12v pump & reel |
| | |i) | |F OR L |
| | | | |$95.00 Ea. F or L |
| | | | | |
| | |j) | | |
| | | | |($374.00) F |
| | | | | |
| | |k) | | |
| | | | |$210.00 F |
| | | | | |
| | |l) | | |
| | | | |$65.00 F |
| | | | | |
| | |m) | | |
|Rear Bumper Options: Included in the base Spec. is an open grate bumper with| | | |F = Factory Installed L = Local Installed |
|a class III receiver hitch. | | | | |
|Open grate bumper with 24-In. wide drop down center step with receiver tube.| | | | |
|Open grate bumper with center portion cut down for lower 1st step. | | | | |
|“Western Mule” bumper with electric folding crane, model #S2000 or U2000 | | | | |
|Mounted to maintain 12-degree departure angle (un-laden). Rated 2,000 Lbs. | | | | |
|with 50-Ft. cable. | |a) | |$352.82 F (Specify tube size) |
|Folding boom (for storage) corner mounted Jib Crane with extendable boom, | | | | |
|extended frame and bumper mounted with outriggers, 1,500 Lb. capacity @ | | | | |
|4-Ft, 900 Lb. capacity @ 7-Ft. To include electric winch and control | |b) | |$ (607.50) F |
|pendant. 2,000 Lb. maximum capacity 2-part. Power rotation. | | | | |
|Standard bumper, 8-In. tread plate surface, no hitch. (Deduct option.) | | | | |
|Heavy duty 15-In. deep “Bustin” bumper with open grate surface and class IV | | | | |
|pintle hitch rated 10,000 Lbs. | | | | |
|6-Way trailer receptacle ILO 7-way | |c) | |$ 7,372.92 F $ 9,158.51 L |
|6-Way trailer receptacle in-addition-to 7-way | | | | |
|Electronic brake control unit in the cab wired to customer standard. Reese | | | | |
|or Prodigy #90185 available. | | | | |
|Universal vice/tool mount located in bumper. Price each, then purchaser to | | | | |
|specify quantity and location. | |d) | |$7,353.63 L |
|Removable step that can be installed in trailer hitch tube. | | | |Higher capacities available |
|Other: Pollak 7-way trailer connector located in the bumper. Includes rubber| | | |And quoted separately. |
|boot and sealed J-box for wiring. | | | | |
|20-In steel tail shelf assembly plus step bumper. Includes top-access center| | | | |
|storage and side access storage. Available with or without internal framing | | | | |
|for a corner mounted crane. Center 2-In. receiver hitch included. Top | | | | |
|surface is diamond plate steel or smooth (specify) and has non-skid paint in| |e) | |$ (1,276.91) F |
|center lining up with the isleway. | | | | |
|Note 1) | | | | |
|Seller to order adequate frame overhang length with a line note to the body | | | | |
|manufacturer to “Leave the frame long for local tail shelf installation.” | |f) | |$ N/A |
|Seller to refer to the chassis data book and select the longest frame | | | | |
|overhang available for the wheelbase being ordered. | |g) | |$23.37 F $93.05 L |
|Note 2) | | | | |
|When the internal boxed reinforcement and heavy top plate for a crane is | |h) | |$98.13 F $136.17 L |
|ordered, this is an component that needs to be approved by the engineering | | | | |
|department of the manufacturer for the crane model you intend to purchase. | | | | |
|The seller will provide a sketch showing the internal reinforcement with | |i) | |$301.41 Reese F |
|structural dimensions that can be sent to the crane manufacturer for | | | |$376.00 Prodigy F |
|approval or required changes. The crane manufacturer will also require a | | | |$747.50 Prodigy L |
|stability study and determine the type of outrigger stabilizers required. | | | | |
|Please send the truck frame ratings with the tail shelf sketch, as this may | | | | |
|limit the size of the crane that this vehicle is capable of. Also note that | | | | |
|twin center doors or a roll-up door are likely the only doors that are | |j) | |$309.59 F |
|feasible with a corner mounted crane. | | | | |
| | | | | |
| | |k) | |$163.52 L |
| | | | | |
| | | | | |
| | | | |$295.00 F |
| | |l) | | |
| | | | | |
| | | | | |
| | | | | |
| | |m) | |$3,547.00 Platform and storage only. See Note 1 |
| | | | |$5,547.00 Boxed internal structure and heavy top plate for|
| | | | |customer provided corner mounted crane. See Note 1 & 2 |
|Rear Cargo Door Options: Included in the base Spec. is a full width roll-up | | | |F = Factory Installed L = Local Installed |
|door. | | | | |
|Full width swing doors with plywood lining ILO roll-up | | | | |
|Narrow width 60-In. wide roll-up door | | | | |
|Medium width 74-In. wide roll-up door | | | | |
|4-panel full width swing doors ILO roll-up | | | | |
|Standard 2-panel center swing doors, 40-In. wide opening. | |a) | |$327.11 F Each |
|Single 34-In. wide swing door. | | | | |
|Wide 2-panel center swing doors, 58-In. wide opening. | |b) | |$75.94 F Each |
|Double door windows with protector screen, available for swing or roll-up | | | | |
|doors. | |c) | |$75.94 F Each |
|Security dead-bolt lock keyed differently than cab doors or ignition. | | | | |
|Available for swing or roll-up doors. Will be keyed the same as bulkhead | |d) | |$274.54 F Each |
|door dead-bolt lock, if that option is also selected. | | | | |
|Banana style latch for roll-up door allowing a padlock, inside handle not | | | | |
|available. | |e) | |$(466.14) F Each |
|Hot stick compartment with separate 8x22 In. door with slam latch. Includes | | | | |
|(4) 4-In. PVC tubes. | |f) | |$(247.67) F Each |
|False interior wall with pockets for tools and signs. Accessible from the | | | | |
|rear with the roll-up or full width door open or with separate door if | | | | |
|narrow doors. One pocket can be sized for a ladder, sign holders, Etc. Work | |g) | |$(188.09) F Each |
|with seller on details. | | | | |
|Tool board perpendicular to side wall, set-in 12-in from the rear door | | | | |
|opening. Heavy duty construction with bracing. | |h) | |$161.22 F Each |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |i) | |$64.25 F Each |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |j) | |$(73.60) F Each |
| | | | | |
| | | | | |
| | | | |$ 926.00 with door F |
| | |k) | |$ 826.00 accessible with main door opened F |
| | | | | |
| | | | | |
| | | | |$ 900.00 per side, accessible with main door opened F |
| | | | |$1100.00 per side, with access door. |
| | |l) | | |
| | | | | |
| | | | |$500.00 per side, accessible with main door opened. F or L|
| | | | |(Tool hangers not included) |
| | | | | |
| | | | | |
| | |m) | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
|Exterior Safety and Work Lighting: | | | | |
|Arrow Stick, “Federal Signal” (or equal) model #322112. Price each with | | | |F = Factory Installed L = Local Installed |
|in-cab #331105control, then purchaser to specify if front, rear or both. | | | | |
|Arrow Stick LED, “Federal Signal” (or equal) models listed with pricing. | | | |$637.87 F 1,127.28 L Each |
|Price each with #331105 in-cab control, then purchaser to specify if front, | |a) | | |
|rear or both. The most expensive model VPX series has the highest quality | | | | |
|seals for exterior mounting. | | | | |
| | | | |$1,378.55 F Ea. 322112 PLS-8-37 |
| | |b) | |$1,739.00L Ea. 322112 PLS-8-37 |
|Strobe Light, “Federal Signal” (or equal) model #420200-02 with #210846 | | | |$1,578.55 F Ea. #330312 SM kit |
|mounting base. Price each with in-cab switch, then purchaser to specify | | | |$1,941.05 L Ea. #330312 SM kit |
|quantity and location of each light. | | | |$2,257.00 F Ea. #320886 VPX |
|Strobe Light LED, “Federal Signal (or equal) model #252650-02. Price each | | | |$2,550.00 L Ea. #320886 VPX42 |
|with in-cab switch, then purchaser to specify quantity and location of each | | | |$2,104.00 F Ea. #320892 VPX51 |
|light. | | | |$ 2,464.00 L Ea. #320892 VPX51 |
| | | | |Advise the LED model you use in your fleet. |
|Brush guard for strobe lights. Price each. | | | | |
|Combination LED Emergency Light Bar with LED directional Arrow Stick light | | | | |
|bar and two work lamps. “Federal Signal” (or equal) model #JLL5402-CSB plus | | | |$474.32 F $ 683.09 L Each |
|#331105 in-cab control. Price each, then purchaser to specify quantity and | | | | |
|location. | | | | |
|Halogen 12-volt and 110-VAC work lamps. 12-VDC Whelan and Hella work lamps | |c) | | |
|(or equal) and “Havis-Shields” (or equal) model #KR-36 with in-cab switch. | | | | |
|Purchaser to specify quantity and location. | | | |$592.31 F Ea. Ultrastar 252650-02 |
| | | | |$751.45 L Ea. Ultrastar 252650-02 |
| | | | |$461.31 F Ea. 651 # 420223-02 |
|Four corner LIN3 strobe light system, “Federal Signal” (or Whelan equal) | |d) | |$621.50 L Ea. 651 #420223-02 |
|four model #IPX300-2 surface mounted lights with model 4-channel amplifier, | | | | |
|if required. Purchaser to specify light placement front and rear (and side, | | | |$28.28 F or L Each for 651 |
|if applicable). Side mounted strobes will have one or two switches to cancel| | | |$37.28 F or L Ea. For Ultrastar |
|side lights when not desired. Purchaser to specify if #607138 Round or | | | | |
|#607139 Oval rubber mounted lights are to be substituted for the LIN surface| |e) | | |
|mounted lights at the rear. These are priced the same as the LIN3 light | | | | |
|groups. | | | |$3,188.20 F $3,214.12 L Each |
|Additional stop/turn/tail and back-up lights located approximately 48 In. | | | | |
|from the ground. | | | | |
|110-volt x 48 In. fluorescent lights. Price each, then purchaser to specify | |f) | | |
|quantity and location. (Requires generator or inverter.) | | | | |
| | | | | |
| | | | |$615.25 F Each 110V Havis |
| | | | |$273.37 F Each 12V Whelan |
| | | | |$309.66 L Each 12V Hella |
| | | | | |
| | |g) | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$1,357.52 F or L Ea. (Four LIN3) |
| | | | |$2,036.28 F or L Ea. (Six LIN3) |
| | | | |$1,617.52 F or L Ea. (Four LIN6) |
| | | | |$2,491.28 F or L Ea. (Six LIN6) |
| | | | |$2,361.00 F or L Ea. (Four LIN6 and Two LIN3 – for sides) |
| | |h) | |Chrome light bezels $11.25 Ea. |
| | | | |Additional LIN3’s $339.00 Installed Each. |
| | | | |Additional LIN6’s $404.00 Installed Each. |
| | | | | |
| | | | | |
| | | | | |
| | | | |$181.08 F (Set inboard ) |
| | | | |$845.43 L (Set outboard for roll-up and full rear doors |
| | | | |and requires custom brackets and mounting.) |
| | | | | |
| | | | |$250.51 F or L Each |
| | | | | |
| | | | | |
| | | | | |
| | |i) | | |
| | | | | |
| | | | | |
| | | | | |
| | |j) | | |
|Traffic cone holder system, front end mounted to allow up to 16 standard | | | |F = Factory Installed L = Local Installed |
|cones. Rigid mounted to allow hood to lift up without tilting or removing | | | | |
|cones. Designed to maintain 12 degree (un-laden) approach angle with cones | | | | |
|in holder. | |k) | |$474.32 F 459.61 L Each |
|“Go Light” (or equal) model 2067 remote controlled spot lamps. Price each, | | | | |
|then purchaser to advise quantity and location. | | | | |
|Power cord reels, Reelcraft (or equal) 12-gauge 3-strand cord, 45 to 50 Ft.,| | | | |
|part # L5550 123 3, or similar. | | | | |
|Federal Signal Highlighter LED mini light bar, amber #454201-02. Specify | |l) | |$490.67 F 663.44 L Each |
|quantity and location. | | | | |
|Generator, Inverters and External Cabinets: | | | | |
|Generator cabinet located above and below floor line so it is no lower than | | | | |
|the side skirt. Cabinet can have an optional roll-out tray if taller than | | | | |
|surface mounted genset. Purchaser to specify make and model of the generator| |m) | |$514.00 Ea. F or L |
|they intend to use for cabinet sizing purposes. | | | | |
|Generator “Onan” “Quiet Diesel” (or equal) Model #CMQD-7500 7.5 KW with | | | | |
|sound enclosure. In-cab or in-cargo area on/off and monitor panel. | |n) | |$859.00 Ea. F or L surface mounted |
|Shore-power plug, one exterior and four interior duplex outlets wired to | | | |$59.50 Ea. If riser is needed. |
|code. Conduit recessed in strut channel or wall. | | | | |
|Generator “Onan” “Quiet Diesel” (or equal) Model #CMQD-5500 5.5 KW with | | | | |
|sound enclosure. In-cab or in-cargo area on/off and monitor panel. | | | | |
|Shore-power receptacle, one exterior and four interior duplex outlets wired | | | |$1,498.88 F Each |
|to code. Conduit recessed in strut channel or wall. | | | |$1,803.88 F or L with roll-out tray. Exhaust and possibly |
|C Generator “Onan” “Quiet Diesel” (or equal) Model #CMQD-10000 10 KW with | | | |fuel lines must be disconnected to roll-out the generator.|
|sound enclosure. In-cab or in-cargo area on/off and monitor panel. | | | |Power cords will have and extra loop for roll-out as they |
|Shore-power receptacle, one exterior and four interior duplex outlets wired | | | |are accessible only from back side. |
|to code. Conduit recessed in strut channel or wall. | |a) | | |
| | | | | |
| | | | | |
| | | | |$13,540.12 Each F or L |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |b) | | |
| | | | | |
| | | | |$12,425.60 Each F or L |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |c) | | |
| | | | | |
| | | | |$14,836.90 Each F or L |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |d) | | |
|Combo Generator and HVAC system, “Idle Solutions” (or equal) model 7.2KW | | | |F = Factory Installed L = Local Installed |
|with 14,000 BTU A/C and 2.5KW electric heat. 3 cylinder diesel engine. | | | | |
|Inverter System full sine wave 12-volt DC to 110-volt AC, requires 4-battery| | | | |
|option. In-cab or in-cargo area on/off and monitor panel. Shore-power | | | | |
|receptacle, one exterior and four interior duplex outlets wired to code. | | | | |
|Conduit is flexible type and surface mounted. Note that lower and higher | | | | |
|watt inverters are available and can be priced on a separate letter. | |e) | |$17,225.40 L Each F or L |
|Inverters installed with a 50-amp power panel on the wall. | | | | |
|Central switch panel (6 switch standard) with lighted legend and circuit | | | | |
|breaker switches. “Wired Rite Systems” (or equal) #CB100R switches for | | | | |
|strobes, auxiliary lighting, PTO, etc. Priced per switch. Contractor and | | | |$4,465.11 F Each Zantrex Model 458 3,000 Watt and two |
|purchaser to collaborate on switch assignment and panel location. | |f) | |dedicated deep cycle batteries (four total on vehicle). |
|Additional duplex interior outlets. Price as two if fourplex is desired for | | | |$ 5,393.00 F Each Vanner IQC12 3,600 Watt with Kussmaul |
|that location. | | | |auto eject and two dedicated deep cycle batteries (four |
|Additional duplex exterior outlets. Price as two each if fourplex is desired| | | |total on vehicle). |
|for that location. | | | | |
| | | | | |
|Exterior mounted cabinets | | | |$580.85 F Each |
| | | | |$766.20 L Each |
| | | | |$42.25 Per Additional Switch |
| | | | | |
| | |g) | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$85.00 F Each Duplex |
| | |h) | |2x if fourplex is called out |
| | | | | |
| | | | | |
| | |i) | |$202.00 F Each Duplex |
| | | | |2x if fourplex is called out |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
|Exterior compartment for Jack Hammer | | | | |
|Low profile compartment aft of rear wheels | |j) | |$1,063.12 F Each |
|24W x 20H x 20 deep forward of rear axle (Single Door) | | | | |
| | |k) | |$800.00 F Each |
|36W x 20H x 20 deep forward of rear axle (Double Doors) | | | | |
| | |l) | |$861.00 F Each |
|48W x 20H x 20 deep forward of rear axle (Double Doors) | | | | |
| | |m) | |$910.00 F Each |
|24W x 30H x 20 deep forward of rear axle with floor cut-in (Single Door) | | | | |
| | | | | |
|36W x 30H x 20 deep forward of rear axle with floor cut-in (Double Doors) | |n) | |$969.00 F Each |
| | | | | |
|24W x 60H x 20 deep forward or aft of rear axle with floor cut-in for | | | | |
|welding bottles, Etc. | |o) | | |
| | | | |$912.00 F Each |
|24W x 12H x 20 deep aft of rear axle | |p) | | |
| | | | |$971.00 F Each |
|36W x 12H x 20 deep aft of rear axle | |q) | | |
| | | | |$1,073,.00 F Each |
|36W x 18H x 20 deep aft of rear axle with floor cut-in. | | | | |
| | |r) | | |
|24W x 18H x 20 deep aft of rear axle with floor cut-in | |s) | |$800.00 F Each |
| | |t) | |$861.00 F Each |
|Consult with seller to determine what cabinets are available for any given | | | |$848.00 F Each or |
|wheelbase and body length combination and what clear space is available for | | | |$1,345.00 F Each with aluminum double doors |
|this purpose. | |u) | |$936.00 F Each |
| | | | | |
| | | | |There are so many sizes and cabinet combinations available|
|Exterior Cabinet Options: | | | |– please discuss your particular needs with the seller. A |
| | | | |custom quote can be prepared on a separate letter. |
|Option 1: Louver vent installed in back side of box carcass. Louvers may not| | | | |
|be available on some under floor compartments – discuss with seller. | | | |$41.00 F Each |
| | | | | |
|Option 2: Louvers or screens installed in door(s) | | | | |
| | |v) | |$ 92.00 F Each |
|Option 3: Price each for one adjustable shelf with 2-In. front lip. | | | | |
| | | | | |
|- 24"W Adjustable Shelf - Only available on 20" or higher compartments | |w) | | |
| | | | | |
|- 36"W Adjustable Shelf - Only available on 20" or higher compartments | | | |xi) $ 110.00 F Each |
| | |x) | | |
|- 48"W Adjustable Shelf - Only available on 20" or higher compartments | | | |xii) $147.00 F Each |
| | | | | |
|Option 4: Price for one pull-out tray with 2-in lip all around, on slides | | | | |
|rated 150# each. | | | |xiii) $168.00 F Each |
| | | | | |
|- 24"W Shelf w/ 2" Lip w/ Pull Out Slides | | | | |
| | | | | |
|- 36"W Adjustable Shelf - Only available on 20" or higher compartments | | | | |
| | | | | |
|- 48"W Adjustable Shelf - Only available on 20" or higher compartments | | | |yi) $136.00 F Each |
| | |y) | | |
|Option 5: Price for one pull-out tray on slides rated 300# each for | | | |yii) $163.00 F Each |
|generator (connections for battery, exhaust pipe and fuel lines will remain | | | | |
|the same as a fixed mount and need to be removed to slide out the generator.| | | | |
|The back-side AC connection and remote control panel harness will remain the| | | |yiii) $197.00 F Each |
|same as a fixed mount installation, as they will allow the generator to | | | | |
|slide-out with these harnesses connected. | | | | |
| | | | | |
|Option 6: Hold-down straps for two welding bottles with two 8-In. hose hooks| | | | |
| | | | | |
|Option 7: Dome light with switch installed in the roof of the cabinet, | | | |$305.00 F Each for roller set and tray. |
|powered through key switch accessory circuit. | | | | |
| | | | | |
|Option 8: Price for one pair of 1-1/2 In. drain holes with rubber evacuator | |z) | | |
|cup. One center at front and one center at rear of the carcass floor. | | | | |
| | | | | |
|Option 9: 1/4 In. thick removeable ribbed rubber floor mat inside the | | | | |
|compartment held down with four corner screws, #10 stainless steel sheet | | | | |
|metal screws and finishing washers. | | | | |
| | | | |$378.00 F Each set or bottle tray, hold-back and hooks. |
| | | | | |
| | | | |$75.00 for switch + $55.00 for each light (installed). |
| | | | | |
|PTO Power Options: | |aa) | | |
|Air compressor, PTO driven, “Ingersoll Rand” (or equal) 30 CFM with | | | |$37.00 for each pair (installed) |
|manufactures standard tank. 1/2” x 50’ line on hose reel. | | | |$75.00 for additional work such as a dimple or sump in the|
|Air compressor, PTO driven, “Ingersoll Rand” (or equal) 90 CFM with | |bb) | |floor for the drain(s) |
|manufactures standard tank and cooler. 1” x 50’ line on hose reel. | | | | |
|Hydraulic system for work tools. PTO with direct mount 10 GPM pump, control | | | |$97.00 for each ¼-In. mat |
|valve, 2-line hose reel with 50’ hose, hydraulic return line cooler module, | | | | |
|hydraulic storage tank, in-line return filter. | |cc) | | |
|185 CFM “Ingersoll Rand” (or equal) PTO driven compressor with manufactures | | | | |
|standard reservoir capacity. | | | | |
| | | | | |
|Additional air storage tank with check valve located under deck if possible.| | | | |
| | |dd) | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$11,276.19 F or L |
| | | | |Boss model 80100-UBI-30 CFM |
| | | | | |
| | | | | |
| | | | | |
| | | | |$12,403.81 F or L |
| | |a) | |Boss model 8060-UBI-100 CFM |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |b) | |$9,854.32 F or L |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |c) | | |
| | | | | |
| | | | | |
| | | | |$13,231,35 F or L |
| | | | |Boss model 8060-UBI-185 CFM |
| | | | | |
| | | | | |
| | | | |$457.00 F or L |
| | | | | |
| | | | | |
| | | | | |
| | |d) | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | |e) | | |
|Roof Options: | | | |F = Factory Installed L = Local Installed |
|Translucent roof without headliner instead of .040 aluminum | | | | |
|Translucent roof with center opening in headliner to create skylight. | |a) | |$(58.41) F |
|Heavy duty full length diamond plate aluminum overlay | | | | |
|Provisions for roof mounted RV style AC Unit | | | |$239.49 F |
| | |b) | | |
| | | | | |
| | |c) | |$1,821.00 F |
| | | | | |
| | | | | |
| | | | | |
| | | | |$119.16 F |
| | | | | |
| | |d) | | |
| Paint: | | | | |
|User specified solid fleet exterior color (Arctic White Std.). Provide | | | | |
|“DuPont” paint code to contractor. | | | | |
|User specified metallic or premium exterior color (Arctic White Std.). | | | | |
|Provide “DuPont” paint code to contractor. No pearlescent or custom paints | | | | |
|available at this price. | |a) | |$300.00 F (Dupont Solid Color) |
|Full under-body undercoating in addition to standard in wheel wells only. | | | | |
|Other______________________________ | | | | |
| | | | | |
| | |b) | |$700.96 F (Dupont Metallic or Premium Color) |
| | | | | |
| | | | | |
| | | | | |
| | | | |$584.13 L (Treated after arrival) |
| | |c) | | |
| | | | |$____________ |
| | |d) | | |
|Delivery and shipment options (free delivery within the State of WA is | | | | |
|included in the base Spec. price.) | | | | |
| | | | | |
|Do not drive from body factory to dealership (shipped via flatbed truck). | | | | |
|Shipment to out-of-state destination, driven from dealership to purchaser. | | | | |
|Price per mile then purchaser to calculate distance from point of WA boarder| | | | |
|in-line with destination. | | | |$3,832.00 ½ deck load or 2-unit order that can be on the |
|Driven directly from Utilimaster to point-of destination. Purchaser will | |a) | |same trailer. |
|assume responsibility to check-in the vehicle and perform pre-delivery or | | | |$5,110.00 full deck load or single unit order consuming |
|in-service inspection and take vehicle to nearest Freightliner dealer for | | | |full trailer. |
|warranty repairs. | | | | |
| | | | |$1.25 per mile from point of shipping to point of |
| | |b) | |destination. |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |$ No charge |
| | |c) | |(Single destination drive-a-way is included in the base |
| | | | |bid price.) |
|Manuals, Documents, Training & Spare Parts | | | |D = Dealer Provided |
|Chassis shop and parts manuals in paper format | | | | |
|Chassis shop and parts manuals in *.PDF format on CD-ROM | | | | |
|Engine shop and parts manuals in paper format | |a) | |$550.00 D |
|Engine shop and parts manuals in *.PDF format on CD-ROM | | | | |
|Allison transmission shop and parts manuals in paper format | | | | |
|Allison transmission shop and parts manuals in *PDF format on CD-ROM | |b) | |$600.00 D |
|Walk-in body shop and parts manuals in paper format | | | | |
|Walk-in body shop and parts manuals in *.PDF format on CD-ROM | |c) | |$ 400.00 D |
|Complete filter & belt set for servicing engine and transmission | | | | |
|Factory training (at corporate training center) for chassis maintenance, | | | | |
|Portland, OR location. Seller to provide training calendar for available | |d) | |$500.00 D |
|dates. | | | | |
|Factory training (at corporate training center) for body maintenance, | | | | |
|Wakarusa, IN location. | |e) | |$300.00 D |
|On-site factory training for FCCC chassis. 2-day class. | | | | |
|On-site factory training for electrical & troubleshooting for current | | | | |
|products. 3-day class. | |f) | |$400.00 D |
| | | | | |
|L & M can be combined for a 5-day class, same week. For engine and | | | | |
|transmission training, contact Cummins NW or Pacific Power Products for | |g) | |$100.00 D |
|schedule and pricing. | | | | |
| | | | | |
| | |h) | |$100.00 D |
| | | | | |
| | | | | |
| | |i) | |$220.00 D |
| | | | | |
| | | | | |
| | |j) | |$550.00 D per person, including |
| | | | |Per diem, travel allowance & lodging |
| | | | | |
| | | | |$1,350.00 D per person, including Per diem, travel |
| | |k) | |allowance & lodging |
| | | | | |
| | | | | |
| | |l) | |$1,750.00 D per day for up to 10 students |
| | | | | |
| | |m) | |$1,750.00 D per day for up to 10 students |
| | | | | |
| | | | |A 2-day or 3-day on-site class is $175 per student, per |
| | | | |day, $1,750 per day minimum. Dealer can arrange a shared |
| | | | |expense for other agencies or companies wishing to |
| | | | |participate in this training. |
| Extended Warranties | | | |D= Dealer Provided |
|5-Year/50,000 Mile Basic Extended Coverage for Chassis, Engine, Transmission| | | | |
|and Drive Train ILO 3-Year/50,000 Mile Coverage. Shall include Towing | | | | |
|Coverage. | | | | |
|5-Year/100,000 Mile Basic Extended Coverage for Chassis, Engine, | | | | |
|Transmission and Drive Train ILO 3-Year/50,000 Mile Coverage. Shall include | | | |a)$ 2,606.00 D |
|Towing Coverage. | |a) | | |
|Bidder to submit statement of manufacturer’s extended coverage policy | | | | |
|including a list of “Exclusions” or “What-Is-Not-Covered” with this IFB. | | | | |
| | | | |b)$ 3,646.00 D |
| | |b) | | |
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- contract employment form for teachers
- release of information form printable
- new patient information form template
- request for information form template word
- patient information form template
- bank information form 1199a
- current health information technology
- seller information form real estate
- employee information form free
- employee information form template free
- free contact information form template
- ministry information form sample