RadioRA CSI spec (260933 CSI Spec) 050107.doc
SECTION 260933
REMOTE CONTROLLED DIMMERS
Lutron RadioRA2 Radio Frequency Light Control System (RFLCS)
This specification is dated December 13, 2012March 4, 3 2010, and supersedes all previous Lutron RadioRA2 Light Control specifications.
This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be revealed or hidden by one of the following methods:
• Microsoft Word: From the pull-down menus select TOOLS, then OPTIONS. Under the tab labeled VIEW, select or deselect the HIDDEN TEXT option.
• Corel WordPerfect: From the pull-down menus select VIEW, then select or deselect the HIDDEN TEXT option.
To print a copy of the specification that includes the hidden text, (1) Select “Print” (2) Select “Options” (3a) Check the box to print hidden text. (3b) Uncheck the box to not print hidden text.
This guide specification section is intended for use in the preparation of a project specification section covering the Lutron RadioRA2 Light Control System.
The following should be noted in using this specification:
• Hypertext links are included to those organizations whose standards are referenced within the text, to assist in product selection and further research. Hypertext links are underlined and contained in parenthesis, e.g.:
• Optional text requiring a selection by the user is enclosed within brackets, e.g.: “Section [09000.] [_____.]"
• Items requiring user input are enclosed within brackets, e.g.: “Section [_____ - ________]."
• Optional paragraphs are separated by an "OR" statement, e.g.:
**** OR ****
- GENERAL
SUMMARY
A. SECTION INCLUDES:
1. Lighting Control Devices
B. Related Sections:
Edit the following paragraphs to coordinate with other sections in the Project Manual.
1.
2. Section [262726 - Wiring Devices] [______ - ___________]
3. Section [265113 – Interior Lighting Fixtures, Lamps, and Ballasts:] [______ - ___________:] Fluorescent electronic dimming ballasts.
REFERENCES
EDIT PARAGRAPHS BELOW TO INCLUDE ONLY THOSE STANDARDS REFERENCED ELSEWHERE IN THIS SECTION.
A.
1. C62.41-1991 – Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits.
B. ASTM International (ASTM) ()
1. D4674 -02a Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight.
C. Canadian Standards Association (CSA) (csa.ca).
1. CSA C22.2 # 184 Solid-State Lighting Controls
D. International Electrotechnical Commission (iec.ch).
1. (IEC) 801-2 Electrostatic Discharge Testing Standard.
2. IEC/EN 60669-2-1 Switches for household and similar fixed electrical installations - electronic switches.
E. International Organization for Standardization (ISO) (iso.ch):
1. 9001:2000 – Quality Management Systems.
F. National Electrical Manufacturers Association (NEMA) ()
1. WD1 (R2005) - General Color Requirements for Wiring Devices.
G. Norma Official Mexicana (NOM).
1. NOM-001 Electronic Products – Safety Specifications
2. NOM-003-SCFI Electrical products - Safety Specifications
H. Underwriters Laboratories, Inc. (UL) ():
1. 244A – Solid State Appliance Controls.
UL 1472 is the Underwriters Laboratories Standard for Safety of Solid State Dimming Controls that sets limits on the amount of DC voltage a dimmer may deliver to a magnetic ballast or transformer. UL Listed wall box dimmers must comply with this standard. This ensures that the dimmer will not overheat the transformer.
2.
SYSTEM DESCRIPTION
A. RADIO FREQUENCY LIGHT CONTROL SYSTEM (RFLCS)
1. Modular dimming and switching components for installation by contractor or authorized dealer.
2. Two-way Radio Frequency controlled wall-mounted dimmers, switches, wall keypads, table top keypads and lamp dimmers, plug in dimmers and switches, shades, motion sensors, RF signal repeaters, and interfaces using Clear Connect RF technology.
3. Requires no central processor.
SUBMITTALS
EDIT PARAGRAPH BELOW TO COORDINATE WITH OTHER SECTIONS IN THE PROJECT MANUAL.
A.
B. Specification Conformance Document: Indicate whether the submitted equipment:
1. Meets specification exactly as stated.
2. Meets specification via an alternate means and indicate the specific methodology used.
C. Shop Drawings; include:
1. Load schedule indicating actual connected load, load type, and voltage per circuit, circuits and their respective control zones, circuits that are on emergency, and capacity, phase, and corresponding circuit numbers.
2. Schematic of system.
D. Product Data: Catalog cut sheets with performance specifications demonstrating compliance with specified requirements.
CLOSEOUT SUBMITTALS
THIS DOCUMENTATION WILL BE COMPLETED DURING THE STARTUP OF THE LIGHTING CONTROL SYSTEM. THIS DOCUMENTATION DEFINES THE FUNCTIONAL TEST PROCEDURES TO BE USED AND THE RESULTS OF THE ONSITE TESTING OF THE EQUIPMENT. A COPY OF THIS DOCUMENTATION WILL BE DELIVERED AFTER STARTUP COMPLETION.
A.
1. Lighting Control System Manufacturer to provide Enhanced Start-up documentation that details the start-up procedure being performed including a process to follow, details on tests performed and an area that documents any test results.]
QUALITY ASSURANCE
EDIT PARAGRAPH BELOW TO INDICATE MINIMUM LEVEL OF EXPERIENCE REQUIRED BY LIGHTING MANAGEMENT CONTROL MANUFACTURERS TO SUIT PROJECT REQUIREMENTS.
A.
ISO9001 is a standard that covers the design and manufacture of a product. This ensures that the product design has been properly documented. A manufacturer who meets ISO9001 is better equipped to support the product over the life of the equipment versus an ISO9002 manufacturer who may not have this documentation. ISO9002 manufacturers are only knowledgeable about the manufacturing process and not how the product was designed.
B.
C. RFLCS:
Edit paragraph below retaining only those standards necessary to meet project requirements.
1.
2. Approval of local radio communications governing agency. Provide evidence of compliance upon request.
PROJECT CONDITIONS
A. DO NOT INSTALL EQUIPMENT UNTIL FOLLOWING CONDITIONS CAN BE MAINTAINED IN SPACES TO RECEIVE EQUIPMENT:
1. Ambient temperature: 0 degrees to 40 degrees C (32 degrees to 104 degrees F).
2. Relative humidity: Maximum 90 percent, non-condensing.
During the installation phase, considerable dust (drywall, concrete, etc.) may be deposited on electrical components and impair performance. General accepted housekeeping protection of the electrical equipment must be maintained.
3.
WARRANTY
SELECT ITEM A ONLY IF FACTORY STARTUP IS NOT DESIRED. THE ENHANCED 8 YEAR LIMITED WARRANTY IS PROVIDED ONLY FOR SYSTEMS WITH FACTORY STARTUP. THE EXTENDED WARRANTY OPTIONS ARE ONLY AVAILABLE FOR SYSTEMS PROVIDED WITH FACTORY STARTUP. REFER TO SECTION 3.2 OF THIS SPECIFICATION FOR STARTUP.
A.
B. [Provide manufacturer’s Enhanced 8 Year Limited Warranty:
1. 8-year limited parts warranty for the replacement of defective lighting components from the date of system startup completion.
2. 2-year Silver Level Support and Maintenance Plan that covers 100 percent parts and labor from the date of the system startup completion.]
An upgraded full ten-year warranty is available to the owner by purchasing additional years of Support and Maintenance Plan coverage.
C.
1. Silver Level Support and Maintenance Plan: includes 100 percent parts and labor coverage, 24 hours per day, 7 days per week telephone technical support, and can be renewed annually.
**** OR ****
2. Gold Level Support and Maintenance Plan: includes 100 percent parts and labor coverage, 24 hours per day, 7 days per week telephone technical support, annual renewal option, 72-hour on-site response time, an annual scheduled maintenance visit and an upgrade of initial 2-year Silver Level Support and Maintenance Plan to Gold Level Support and Maintenance Plan.
**** OR ****
3. Platinum Level Support and Maintenance Plan: includes 100 percent parts and labor coverage, 24 hours per day, 7 days per week telephone technical support, annual renewal option, 24-hour on-site response time, an annual scheduled maintenance visit and an upgrade of initial 2-year Silver Level Support and Maintenance Plan to Platinum Level Support and Maintenance Plan.]
MAINTENANCE
A. MAKE ORDERING OF NEW EQUIPMENT FOR EXPANSIONS, REPLACEMENTS, AND SPARE PARTS AVAILABLE TO END USER.
B. Make new replacement parts available for minimum of ten years from date of manufacture.
If there is a problem on the job site, the manufacturer must be reachable 24 hours per day / 7 days a week to resolve any lighting control issues. If this service is not provided, project cost overruns and delays can occur. Additionally, answering services can add to frustration and delays.
C.
- PRODUCTS
MANUFACTURERS
A. ACCEPTABLE MANUFACTURER: LUTRON ELECTRONICS CO., INC. – SYSTEM: LUTRON RADIORA2 RADIO FREQUENCY LIGHT CONTROL SYSTEM
****OR****
B. [Basis of design product: Lutron RadioRA2 Radio Frequency Light Control System or subject to compliance and prior approval with specified requirements of this section, one of the following:]
1. Lutron RadioRA2 Radio Frequency Light Control System
2.
C. Substitutions: [Not permitted.] [Under provisions of Division 1.]
Delete items 1 through 3 if substitutions are not permitted.
1.
2. Any substitutions provided by the contractor shall be reviewed at the contractor’s expense by the electrical engineer at a rate of [$200.00] per hour.
3. By using pre-approved substitutions, the contractor accepts responsibility and associated costs for all required modifications to circuitry, devices, and wiring. The contractor shall provide complete engineered shop drawings (including power wiring) with deviations for the original design highlighted in an alternate color to the engineer for review and approval prior to rough-in.
GENERAL
THE FOLLOWING STATEMENT ENSURES A SINGLE POINT OF CONTACT FOR SYSTEM OPERATION. SOME INTERACTION BETWEEN HARDWARE AND SOFTWARE REQUIRES A HIGH LEVEL OF INTEGRATION AND COMPATIBILITY.
A.
Typical dimming equipment is rated for 40 degrees C (104 degrees F). This is the maximum ambient temperature that can exist while the dimming equipment is operating at full load conditions. The following statement ensures that the operating equipment is designed to operate at worst case environmental conditions without affecting product life.
B.
Electrostatic charge builds up on people as a result of friction (walking across a carpet). When a person touches an electronic device, a discharge can occur and cause damage. Electrostatic Discharge (ESD) testing is done according to the IEC 801-2 standard (human body model). Testing should be completed on all user accessible points such as terminal blocks, buttons, and control inputs. The standard listed below describe only how to conduct this test, that is why it is important to specify “without impairment of performance” as the pass/fail criteria.
C.
DIMMER PERFORMANCE REQUIREMENTS
ELECTROLYTIC CAPACITORS ARE TYPICALLY THE COMPONENT MOST SENSITIVE TO HEAT IN A DIMMING CIRCUIT. THEIR EXPECTED LIFETIME DOUBLES FOR EVERY 10 DEGREES C THAT THE COMPONENT OPERATES BELOW THE MANUFACTURER’S RATED OPERATING TEMPERATURE.
A.
Dimming equipment is exposed to peak currents much higher than rated operating current due to tungsten inrush, magnetic inrush, and lamp burnout. If not designed to handle this inrush/surge condition, the equipment could fail at anytime when turned on or when lamps fail. The following two statements (Thyristors & Dimmers/Relays) ensure reliability of components.
B.
C. Capable of withstanding repetitive inrush current of 50 times operating current without impacting lifetime of dimmer/relay.
A surge protector is sold as an accessory to a computer purchase to protect it from lighting strikes or other voltage surges. Likewise, dimmer circuits require surge protection. Surge protection can be built into a dimmer circuit or it can be purchased separately as an external accessory. The following statement ensures that the surge protection is built into the dimming system.
D.
Other power handling devices installed on a branch circuit (far from electrical service entrance points) need to survive a Category C near lightning strike without failure.
1.
When off, the semiconductor in a dimmer circuit can allow leakage current to the load creating the possibility for an electrical shock. It is common for this leakage current to exceed 5 milliamps (the UL limit for a GFCI outlets). Using an air gap eliminates leakage current by requiring a physical disconnect in the off position to prevent electric shock when servicing the load.
E.
Power dropouts can occur frequently. The momentary interruption of power should not cause extended periods without lighting or require some manual intervention to reset the lighting system.
F.
1. All programmable information, including system identification codes, addresses, and master control button programming to be retained in non-volatile memory and to remain intact in the case of a 10 year power loss to the system.
G. Dimmers/Fan Controls:
1. Line Voltage Dimmers; Meet following load-specific requirements:
a. Magnetic Low Voltage (MLV) transformer:
Magnetic transformers are susceptible to overheating caused by asymmetrical input voltages. The following design requirements prevent magnetic low voltage transformers from operating above rated current and temperature under normal conditions or component failure.
1)
2) Dimmers using back-to-back SCR construction that could fail open causing DC power to flow into magnetic low voltage load are not acceptable.
b. Electronic Low Voltage (ELV) transformer:
Electronic transformers are susceptible to damage and audible noise issues if used with improper dimming wave forms. Most electronic transformers require a reverse phase control wave form. Transformer manufacturers should be able to provide detailed information on dimming requirements.
1)
c. Neon and cold cathode transformers:
There are both high power factor and low power factor transformers. Dimming is only applicable on the low power factor transformers. Attempting to dim high power factor transformers can damage both the transformer and dimmer, and generate electrical noise on building’s electrical supply that interferes with other equipment.
1)
Electronic transformer technology is continually evolving. At this time Lutron does not recommend any electronic neon transformers for dimming applications. Lutron continues to evaluate products as they become available on the market. Please consult with your Lutron representative for the latest technologies.
2)
For fluorescent control systems consisting of different brands, consider requiring that the ballast manufacturer troubleshoot and diagnose problems after General Contractor’s “Correction after Completion” period expires.
d.
e. Fan Controls
f. Listed as complying with UL 20 , UL 1472, UL 244A, UL 1917 as applicable
g. Provide Multi-location fan speed control
2. Provide control of one ceiling fan up to 2 Amps, 4 speeds plus off, no canopy module required.
Wall Box Dimmers/Fan Controls:
A. OVERRIDE MASTER CONTROL SETTINGS.
1. Turn on, off, change fan speed or dim.
Allows the user to have control of lighting regardless of system status.
B.
Allows the user to leave a safe well-lit room.
C.
Provides nightlight.
A.
Many competing systems require a neutral at every wallbox.
D.
E. Capable of providing smooth continuous dimming from up to 9 control locations of the lighting circuit
F. Electronic Switching controls with or without neutral wire capable of controlling fan loads
REPEATERS
A. CAPABLE OF DIAGNOSING THE SYSTEM COMMUNICATION.
Prevents RF interference.
1.
2. Assign addresses to dimmers, switches, shades, keypads, and repeaters.
Ensures reliable system operation.
3.
Increases the distance RF signals travel.
4.
Diagnostics tools.
5.
6. Determine which system components are within range of receiving radio frequency communications from the repeater.
7. Determine which system components are within range of sending radio frequency communications to the repeater.
8. Derive power from a UL listed class 2 transformer.
9. Time clock
a. Allow events to be programmed to occur without user intervention at specified times during the day in with relation to sunrise/sunset. Sunrise and sunset times will be calculated by specifying the latitude and longitude of the location of the system.
b. Time-clock schedules can be single or periodic events based on absolute time or relative to sunrise/sunset.
The integral temperature compensated time clock ensures that all automatic functions occur at the correct time. Computer time clocks are inherently unreliable and should not be used. Time clocks with a large time drift (greater than 2 minutes per year) require regular maintenance.
c.
10. Away Mode
Away mode can be initiated so that system lighting control dimmers can be activated while the user is away to give the residence an occupied look.
a.
11. Security Mode
a. Shall incorporate a programmable security mode event that may be triggered by a RS232 command, or Ethernet Ethernet command, or contact closure input.
1) Security mode event will allow each dimmer or switch to be either forced to full on or to be flashed and keypads to be disabled.
2) An RS232, Ethernet command, or contact closure event may disengage security mode event. It may also be automatically disengaged after a predetermined amount of time.
3) After security mode event is exited, the system shall return to the previous state.
B. Integrate control station devices and external inputs/outputs into single customizable, multiple failsafe lighting control system, operable manually or automatically.
Electrical equipment is subjected to surges such as lightning strikes during the life of the building. Unless the equipment is protected, these strikes will damage the equipment. ANSI/IEEE has defined the expected surges that will be seen by buildings located throughout North America. The processor is installed on a branch circuit and needs to survive a Category C near lightning strike without impairment to performance.
C.
Power dropouts can occur frequently. The momentary interruption of power should not cause extended periods without lighting or require some manual intervention to reset the lighting system.
D.
E. Multiple Main Repeater systems to operate under single database
This allows the system to be integrated with other building management systems.
F.
G. Full internal backup capable of storing all system memory for minimum of 10 years without power and automatically returning system to its previous state.
Systems that require a computer to run the time clock function or run the system database rely on the computer to be operational. If the computer stops working, the entire lighting system stops working. The following statement ensures that the lighting system works during a computer failure.
H.
I. Communicate to radio frequency lighting control components, with or without the use of a PC.
J. System integration via RS232 and Ethernet:
1. Provide access to:
a. Simulate wall or tabletop keypad station button presses.
b. Send lighting zones or shades to a level.
c. Fine-tuning of preset levels with scene raise/lower.
d. Provide ON/OFF LED status monitoring through button feedback.
e. Access up to 100 Integration scenes
f. Report light and shade level feedback upon local changes to third party devices.
g. Report scene selection feedback to third party devices
h. Report occupancy status changes
2. RS232: Provide ability to communicate by means of RS232 serial communication, user-supplied PC, or digital audiovisual equipment.
3. Ethernet: Provide ability to communicate by means of TCP/IP over Ethernet to Main Repeater by means of user-supplied PC or digital audiovisual equipment.
Retain the article below if power interfaces will be included to meet project requirements. Edit paragraphs below based on which power interface types are necessary to suit project requirements.
A. OPERATE ON A PERSONAL COMPUTER (PC) RUNNING MICROSOFT WINDOWS XP SERVICE PACK 2 OR SERVICE PACK 3, MICROSOFT WINDOWS VISTA, VISTA SERVICE PACK 1, OR VISTA SERVICE PACK 2, OR MICROSOFT WINDOWS 7
B. Include on-screen report capabilities to provide diagnostic information.
C. Provide communication status between all system devices.
D. Download database to Main Repeater
E. Define, program, modify, and update lighting control system database.
F. Allow user to:
1. Define following within desired space
a. Zones
b. Scenes
c. Time-clock
d. Control station devices
e. Switch legs
2. Define global time clock
3. Define device functionality as indicated in subsequent sections
4. Define time-clock schedules that can be single or periodic events based on absolute time or time or time relative to sunrise/sunset.
Power Interfaces
EDIT THE FOLLOWING TO INDICATE TYPE OF POWER INTERFACE DESIRED.
1)
2) Provide high power module and dimmer from a single manufacturer.
3) High power module listed to UL 508 for control of incandescent, magnetic low voltage, electronic low voltage, fluorescent, and neon/cold cathode loads. Provide high power modules as defined on project drawings
a. Fan Speed Controls listed to UL 1917, CSA C22.2 #156, NOM-003-SCFI
b. Switches to be listed to UL 20, UL 508, UL1472, CSA C22.2 #14, NOM-003-SCFI
Lighting Controller with integral dimmers
LUTRON PRESET DIMMERS – LOCALIZED DIMMER USED IN APPLICATIONS WHERE ADJUSTABILITY IN THE LIGHTING LEVEL IS DESIRED. IT ALSO CAN WORK INDEPENDENT FROM THE CENTRAL LIGHTING CONTROL SYSTEM.
A.
B. Electrical: Dimmer to meet limited short circuit test as defined in UL 20.
Include the following for the Lighting Controller with Integral Dimmers.
1.
a. Intensity for each zone indicated by means of one illuminated bar graph per zone.
The information screen on the GRAFIK Eye displays a user customizable name or description. When the user presses a zone or scene button, the information screen displays the given zone or scene name.
b.
An astronomical time clock automatically calculates the sunrise and sunset for any given location in the world. The user can define automatic events in relation to daily sunrise and sunset times. For example, the lights can turn on 30 minutes before sunset each day and turn off 30 minutes after sunrise each day. Astronomical time clocks also automatically adjust for daylight savings time, allow for special programming for weekends, holidays, and special events.
c.
1) Provide access to:
a) Scene selections.
b) Fade zone to a level.
c) Fine-tuning of preset levels with scene raise/lower.
d) Lock out scenes and zones.
e) Fine-tuning of light levels with individual zone raise/lower.
f) Terminal block for wired infrared signal input.
g) Enable/disable wall station.
d. Light intensity with real time energy savings by digital display.
e. Fade time indicated by digital display for current scene while fading.
f. Incorporate built-in wide angle infrared receiver.
g. For temporary local overrides, individual raise/lower buttons to allow zones to be adjusted without altering scene values stored in memory.
If motorized shades are specified by the architect, coordinate shading controls with the general contractor. See section 122413.
h.
1) For temporary local overrides, individual raise/lower buttons to allow zones to be adjusted without altering scene values stored in memory.]
Control of digital fluorescent dimming ballasts requires the ability to address, program, and assign zone and sensor control to the digital fluorescent loads. Doing so, can be achieved directly from the integral power and control module. Direct control of 120V, 277V and/or 220/240V lighting usually requires a power interface that couples both power and control. With the integral digital ballast control output, no additional interfaces are required.
i.
Lutron offers a variety of wireless products and systems for seamless integration, including Radio Powr Savr occupancy and vacancy sensors, Sivoia QS wireless shades, Pico( wireless controller.
j.
Edit the following to indicate type of wall stations desired. Please see the “Wall Station” section in the following link for detailed product information and specification submittal sheets:
C.
1. Allow for easy reprogramming without replacing unit.
2. Allow control of 3 to 6 light zones.
3. Mount individually in a 4 gang US wallbox.
4. Utilize a LC filtering network to minimize interference with radio, audio and video equipment.
Include this section if manual control of the system is required.
A. GENERAL
1. Functionality:
a. Control any single lighting or shade load or combination of lighting and shade loads, which are part of the RFLCS.
b. Allow copying of programming from one master control to another.
c. LEDs glow at a nightlight level when lights assigned to each button are off.
Time delays inherent in large systems can cause short delays between button press and system confirmation. To avoid any confusion and preventing multiple button presses, keypads should immediately show that the button has been pressed for visual confirmation.
d.
There are two types of keypads; those that only send signals and those that send and receive signals. Having the latter type allows feedback to the user to verify that the request has been received and processed. If the lighting control system fails to process the button press request, the LED will turn off to indicate the true system status.
e.
Controls can be programmed with different functionality through system software without any hardware changes.
f.
Unlike traditional scene control wall stations, centralized low voltage controls can be programmed so that the buttons can have a variety of functions.
2.
a. Control station device LEDs to support logic that defines when it is illuminated:
1) Scene logic (logic is true when all zones are at defined levels).
2) Room logic (logic is true when at least one zone is on).
3. Color:
Edit the following to indicate desired color. For non-NEMA colors, color match coordination will be provided on request. Please verify that your word format for item 2 below is “Delta” E “equals” 1, CIE L “asterisk” a “asterisk” b color units. See INTERNATIONAL COMMISSION ON ILLUMINATION home page at:
a.
b. Color variation in same product family: Maximum ΔE=1, CIE L*a*b color units.
c. Visible parts: Exhibit ultraviolet color stability when tested with multiple actinic light sources as defined in ASTM D4674. Provide proof of testing upon request.
4. Provide faceplates with concealed mounting hardware.
To help building occupants understand how to use the lighting control system the architect should provide engraving requirements for all controls. Engraving details should include text size and style.
5.
Engraving must be durable when exposed to cleaning and normal wear.
6.
B. Wall-mount Keypads
1. Field configurable button configurations
2. Accepts 120V power.
C. Tabletop Keypads
1. Field configurable button configurations
2. Allow for use as a tabletop, wireless, or wall-mount keypad.
3. Accepts battery or DC adapter plug-in power
Wireless Controller
A. PRODUCT: [PICO WIRELESS CONTROLLER]
B. Electronics:
1. Communicate via radio frequency
C. Functionality:
1. Control any single lighting or shade load or combination of lighting and shade loads, which are part of the RFLCS.
2. Allow for easy reprogramming without replacing unit.
D. Mounting:
1. Controller shall be capable of being mounted with a car visor clip, table stand or directly to a wall under a Claro screwless faceplate.
2. Provide faceplates with concealed mounting hardware.
E. Color:
1. [Match NEMA WD1, Section 2.] [Custom color to be selected.]
2. Color variation in same product family: Maximum ΔE=1, CIE L*a*b color units.
3. Visible parts: Exhibit ultraviolet color stability when tested with multiple actinic light sources as defined in ASTM D4674. Provide proof of testing upon request.
Include this section if you want control over the system through external inputs such as contact closure, Ethernet, RS232, and IR, etc.
THIS ENABLES THE LIGHTING CONTROL SYSTEM TO RECEIVE A CONTROL SIGNAL FROM ANOTHER SYSTEM (BMS, FIRE, SECURITY, ETC).
A.
1. Where contact closures are used to integrate between lighting controls and other systems:
a. Input open circuit voltage not to exceed 36V.
b. Input short circuit current not to exceed 0.5 mA.
Dry contact closures are used at low voltage and low current applications to ensure reliable switching. This application requires a dry contact mechanical switch. Using any other switch may produce unreliable operation.
c.
Alternatively to dry contacts which are a mechanical device with a certain cycle life expectancy, solid state contacts can be used which do not have this mechanical “wear out” mechanism.
d.
Solid state contact closures have certain non-ideal characteristics that may cause unreliable detection of the state of the switch. One characteristic is when the solid state contact is in the “off” state, there is a leakage current that may cause the input device to read it as a closure. Another characteristic is when the solid state contact is in the “on” state, there is an output voltage that may cause the input device to read it as an open condition.
1)
2) Output on-state saturation voltage not to be less than 2V.
To provide installation flexibility the contact closure input device should accept both momentary and maintained contacts. This alleviates coordination issues between the different divisions in the specification.
e.
2. Provide:
a. Maintained or momentary Contact Closure Inputs for integration with other systems
b. Maintained Contact Closure Input for security system integration
c. Contact Closure Outputs
SENSORS
A. WIRELESS CEILING SENSORS
LRF2-OCRB-P-WH: Wireless ceiling mount occupancy/vacancy sensor using infrared technology for sensing occupancy coupled with Lutron XCT( Technology for sensing fine motion. Sensor can be auto-on/auto-off, auto-on low light/auto-off, or manual on/auto-off. Ceiling mount sensors are recommended for spaces with ceilings less than 12 ft. high.
1.
2. Wireless Ceiling Sensors shall:
a. Have an operational lifetime of 10 years without the need to replace batteries when installed per manufacturer’s instructions.
b. Accommodate up to 3 wireless occupancy/vacancy sensors that can communicate to a single compatible RF receiving device (dimmer, switch) to accommodate all conditions of space utilization and all irregular work hours and habits.
c. Communicate directly to compatible RF receiving devices through use of a radio frequency communications link.
d. Not require external power packs, power wiring, or communication wiring.
e. Provide a clearly visible method of indication to verify that motion is being detected during testing and that the unit is communicating to compatible RF receiving devices (dimmers and switches).
f. Have a multiple segmented lens, with internal grooves to eliminate dust and residue build-up.
g. Utilize Infrared as its sensing mechanism coupled with Lutron XCT( Technology for sensing fine motions. Signal processing technology detects fine-motion, passive infrared (PIR) signals without the need to change the sensor’s sensitivity threshold.
h. Have optional, readily accessible, user adjustable controls for timeout, automatic/manual-on, and sensitivity.
i. Have the ability to be placed in test mode to verify correct coverage and operation from the face of the unit.
j. Have a radio frequency range of up to 60’ (18.3 m) between sensor and compatible RF receiving device(s).
k. Turn off lighting automatically after reasonable and adjustable time delay once the last person to occupy the space vacates a room or area.
l. Comply with the limits for a Class B device, pursuant to part 15 of the FCC rules.
m. Communicate with up to 10 compatible RF receiving devices (dimmers and switches).
n. Be capable of turning dimmer’s lighting load on to an optional locked preset level selectable by the user. Locked preset range shall be selectable on the dimmer from 1 percent to 100 percent.
3. Mounting:
a. Provide surface mounting bracket compatible with drywall, plaster, wood, concrete, compressed fiber ceilings.
b. Provide all necessary mounting hardware and instructions for both temporary and permanent mounting.
c. Provide temporary mounting means to allow user to check proper performance and relocate as needed before permanently mounting sensor. Temporary mounting method shall be designed for easy, damage-free removal.
d. Ceiling-mount wireless occupancy/vacancy sensors using passive infrared technology shall have a customizable mask to block off unwanted viewing areas.
e. Sensor lens shall illuminate during test mode when motion is detected to allow installer to verify coverage prior to permanent mounting.
4. Wireless occupancy/vacancy sensor can be programmed to operate as an occupancy sensor (automatic-on and automatic-off functionality), an occupancy sensor with low light feature (automatic-on when less than 1 fc (10 lux) of ambient light available and automatic-off functionality), or a vacancy sensor (manual-on and automatic-off functionality).
5. A vacancy-only model shall be available to meet California Title 24 Energy Efficiency Standard requirements.
ACCESSORIES
INFRARED TRANSMITTERS ARE USED WITH LUTRON SUPPLIED INFRARED RECEIVER CONTROLS. THEY ARE USED IN SPACES WHERE REMOTE CONTROL IS REQUIRED. OPERATION IS THROUGH LINE OF SIGHT.
A.
1. Provide wireless remote control capable of recalling preset light levels for 4 or 8 scenes plus “off” and of fine-tuning light levels with master raise/lower.
2. Designed for use in conjunction with compatible infrared receiver and lighting control; dependent on that receiver, not transmitter.
3. Operate up to 50 feet (15 meters) within line-of-sight to that receiver.
4. “Learnable” by other variable frequency remote controls.
B. Lamp Dimmer
1. Provide local lamp control without requiring the use of a master control.
C. Wireless Controller
1. Product: [Pico Wireless Controller]
2. Electronics:
a. Communicate via radio frequency to Main Repeater, dimmers, switches, and lamp dimmers
3. Functionality:
a. Provide 5-button wireless remote control.
b. Upon button press, LEDs to immediately illuminate.
c. Allow for easy reprogramming without replacing unit.
d. Provide wireless remote control capable of controlling all lights and shades within the system
4. Mounting:
a. Controller shall be capable of being mounted with a car visor clip, table stand or directly to a wall under a Claro screwless faceplate.
b. Provide faceplates with concealed mounting hardware.
5. Color:
a. [Match NEMA WD1, Section 2.] [Custom color to be selected.]
b. Color variation in same product family: Maximum ΔE=1, CIE L*a*b color units.
c. Visible parts: Exhibit ultraviolet color stability when tested with multiple actinic light sources as defined in ASTM D4674. Provide proof of testing upon request.
D. Visor Control Transmitter (LR-3B-H-SW)
1. Provide 3-button wireless remote control capable of up to 7 independent functions.
2. Capable of recalling preset light levels and controlling equipment by other manufacturers through contract closures.
3. Provide removable visor clip
4. Operate up to 46 meters (150) feet from RF receiver.
SOURCE QUALITY CONTROL
TO ENSURE THAT 100 PERCENT OF THE LIGHTING CONTROL PRODUCTS WORK AT INSTALLATION, THE MANUFACTURER SHOULD TEST 100 PERCENT OF ALL ASSEMBLIES AT FULL RATED LOAD IN THE FACTORY. THIS TESTING WILL ASSURE THAT EVERY PRODUCT HAS BEEN TESTED AND GUARANTEED TO WORK. SAMPLING WOULD ONLY PROVE THAT THE SAMPLES WORK AND SHOULD NOT BE ACCEPTABLE.
A.
- EXECUTION
INSTALLATION
A. INSTALL EQUIPMENT IN ACCORDANCE WITH MANUFACTURER’S INSTALLATION INSTRUCTIONS.
B. Provide complete installation of system in accordance with Contract Documents.
In order for the system to be fully commissioned and operating to specification, programming will need to be completed.
C.
D. Provide equipment at locations and in quantities indicated on Drawings. Provide any additional equipment required to provide control intent.
To minimize construction costs and project delays, a site visit is recommended.
A. PROVIDE CONTRACTOR OR AUTHORIZED DEALER TO MAKE SITE VISITS TO ENSURE PROPER SYSTEM INSTALLATION AND OPERATION UNDER FOLLOWING PARAMETERS:
1. Make a visit upon completion of installation of RFLCS:
a. Verify connection of power feeds and load circuits.
b. Verify connection and location of controls.
c. Verify system operation control by control, circuit by circuit.
d. Verify proper Radio Frequency communication.
e. Verify proper operation of manufacturers interfacing equipment.
f. Provide programming.
g. Obtain sign-off on system functions.
h. Demonstrate and educate Owner’s representative on system capabilities, operation and maintenance.
FIELD QUALITY CONTROL
ON-SITE ADJUSTMENTS TO THE LIGHTING CONTROL SYSTEM, AFTER ALL EQUIPMENT AND ROOM FURNISHINGS HAVE BEEN INSTALLED, MAY BE DESIRED IN ORDER TO MEET THE LIGHTING CONSULTANT’S DESIGN INTENT. THESE ADJUSTMENTS MAY INCLUDE LIGHT LEVEL, FADE TIME AND DELAY IN LIGHTING SCENES.
A.
1. Aim and Focus Visit (LSC-AF-VISIT)
a. Facility Representative [_______________] to coordinate on-site meeting with Lighting Control System Manufacturer and Lighting Design Consultant to make required lighting adjustments to the system for conformance with the Lighting Design Consultant’s original design intent.]
CLOSEOUT ACTIVITIES
STANDARD START-UP PROCEDURE FOR LIGHTING CONTROL SYSTEMS INCLUDES TRAINING OF CUSTOMER REPRESENTATIVES. ADDITIONAL TRAINING VISITS MAY BE REQUESTED FOR REASONS SUCH AS WHEN NOT ALL REQUIRED ATTENDEES ARE AVAILABLE AT THE SAME TIME.
A.
1. Lighting Control System Manufacturer to provide [1] [__] day additional on-site system training to site personnel.]
An on-site walkthrough to demonstrate system functionality to a Commissioning Agent is often required for LEED projects.. During this visit, the manufacturer’s Field Service Engineer will perform tasks, at the request of the facility representative or Commissioning Agent, such as to demonstrate wall control functions, explain timeclock schedules or describe occupancy and/or daylight sensor functionality.
B.
1. Lighting Control System Manufacturer to provide a factory certified Field Service Engineer to demonstrate system functionality to the Commissioning Agent.]
MAINTENANCE
A. CAPABLE OF PROVIDING ON-SITE SERVICE SUPPORT WITHIN 24 HOURS ANYWHERE IN CONTINENTAL UNITED STATES AND WITHIN 72 HOURS WORLDWIDE EXCEPT WHERE SPECIAL VISAS ARE REQUIRED.
B. Offer renewable service contract on yearly basis, to include parts, factory labor, and annual training visits. Make service contracts available up to ten years after date of system startup.
An on-site meeting between the Lighting Control System Manufacturer and a Facility Representative may be requested in advance to evaluate the system usage after the building has been in operation for a predetermined period of time. This evaluation can include sensor calibration, timeclock programming, light level analysis, sensor layout support, and training.
C.
1. Lighting Control System Manufacturer to visit site [6] [__] months after system start-up to evaluate system usage and discuss opportunities to make efficiency improvements that will fit with the current use of the facility.]
END OF SECTION
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- produce a text file containing the relevant temperature
- electronics projects circuits
- welcome to aimd bahrain
- powerware 9155 eaton
- productilluminator hid system
- viconics hvac temperature controllers digital thermostats
- radiora csi spec 260933 csi spec
- wall box dimmers and accessories 16140 csi spec 02 28 2008
- alphaserver 1000a systems