Access Washington Home



|DESCRIPTION |Check if as |Describe fully if |

| |Specified or |not as specified |

| |Exceeds | |

|PURPOSE : | | |

|To develop specifications for a “BRUSH” type vehicle for fire control purposes. The Dept |X | |

|of Natural Resources (DNR) is interested in acquiring vehicles that are heavier in frame | | |

|and running gear than the typical class 4 & 5 trucks, but lighter than the normal HD Class| | |

|6 trucks. We need this vehicle in four wheel drive versions with diesel power that is | | |

|industry proven to be low in maintenance with ease of access to engine components for | | |

|minor and major repairs. We require a minimum turning radius as it will be used in wooded | | |

|areas with limited room to maneuver. We need a low hood contour design allowing for | | |

|visibility to be as near the front area of the vehicle as possible. | | |

|The vehicle must be equipped with Rugged Duty Automatic transmission and exhaust braking | | |

|with “related” downshifts. We require ABS four wheel disc brakes. | | |

|With today’s fuel prices, fuel economy is a huge issue and will be considered in this | | |

|vehicle choice. | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

|DESCRIPTION |Check if as |Describe fully if |

| |Specified or |not as specified |

| |Exceeds | |

|A. CAB & CHASSIS |

|1. Chassis load rating to be 21,500 GVWR (with options and pricing for lower/higher |X | |

|ratings) | | |

|2. Frame rating: 80,000 psi steel |X | |

|3. Frame rails to be straight flat design |X | |

|4. Wheel base: 169”(with options & pricing to 235”) |X | |

|5. Cab to Axle: 60” (with options & pricing to 120”) |X | |

|6. 4X4 (with 4X2 options & pricing) |X | |

|7. Conventional Cab (not cab-over) |X | |

| |

|B. CAB & RELATED |

|1. Exterior |

|Premium paint, basecoat / clear coat | X | |

|Solid color upper and lower body | | |

|Exterior roof drip moldings | | |

|Bumper, front, steel. Design to minimize wall to wall clearance | | |

|Steps under cab doors | | |

|Front mud flaps | | |

|Integral tilt grill, hood & fenders. This is a requirement for ease of access to engine | | |

|and related components | | |

|Roof marker lights | | |

|Windows, sun-shade tinted W/S & tinted side windows | | |

|Mirrors, manual, 102” (electric/heated options & pricing) | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

|DESCRIPTION |Check if as |Describe fully if |

| |Specified or |not as specified |

| |Exceeds | |

|2. Interior |

|Six passenger 4-door model (with options & pricing for regular cab 2-door configuration) |X | |

| | | |

|Seats, driver - high back bucket with adjustable back and center console. Passenger seat –|X | |

|2 person with mobile work station and under seat storage. Rear seat – bench | | |

|Tool box option behind driver seat if available | | |

|Seat trim, vinyl (with option & pricing for cloth) |X | |

|Floor covering, molded vinyl |X |After market toolbox |

|Vinyl door trim w/storage |X | |

|Keyed locks both front doors, with common key for doors & ignition |X | |

|Instrument compliments: |X | |

|Tachometer |X | |

|Engine oil pressure & temp w/tell tail light & warning buzzer | | |

|Coolant temp & level |X | |

|Engine hour meter | | |

|Trans temp | | |

|Head lamp & key in ignition warning | | |

|Step-well storage at each door, front & rear | | |

|Sunshades, driver & pass side | | |

|Radio/stereo, AM/FM, (with options & pricing) | | |

|Air Conditioning | | |

|Cruise control & tilt wheel |X | |

|Power points (2ea) 12v |X | |

|Underhood bodybuilders connections for 12v power supply with two separate 30 amp fused |X | |

|circuits |X | |

|All other standard compliments |X | |

| |X | |

| |X | |

| | | |

| | | |

| |X | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

|DESCRIPTION |Check if as |Describe fully if |

| |Specified or |not as specified |

| |Exceeds | |

|C. MECHANICAL |

|1. Engine: |

|Diesel with minimum HP rating of 330, w/620 ft lb torque @ 1600rpm, min. (options & |X | |

|pricing for other HP and torque ratings) | | |

|Bio-diesel compatible (B-5 minimum, prefer B-20) | | |

|Fuel tank, 32 gallon minimum, aft of rear axle (bio-diesel approved) |X | |

|Engine Exhaust brake, variable geometry turbo type, with communication capability between | | |

|brake, engine rpm and transmission down shifts |X | |

|Exhaust – single horizontal with high heat protection for brush rig application | | |

|Auto engine shutdown - low oil, high coolant temp |X | |

| | | |

| | | |

| |X | |

| | | |

| |X | |

|2. Transmission & Transfer Case: |

| a. Automatic transmission, Allison 2350 HD/RDS 6 speed w/660 lb/ft gross torque |X | |

|capability, parking pawl and column shift | | |

|b. To include over-drive | | |

|c. Two speed gear model transfer case, electronically actuated |X | |

|d. PTO compatible, with electronic activation switch e. Synthetic trans fluid |X | |

|f. External trans cooler, heavy duty air to oil | | |

| |X | |

| |X | |

| |X | |

|3. Front axle, suspension & tires: |

|8,000lb capacity - solid drive axle |X | |

|Turning angle up to 45˚ on 4x4 version |X | |

|Turning radius curb to curb maximum: 53 ft on 4x4 crew cab models (with 60” CA) |X | |

|Suspension - tapered leaf | | |

|Stabilizer bar - solid bar style |X | |

|Front wheel – 19.5” x 6.75” steel disc 8-bolt |X | |

|Tires - 245/70R19.5 (with options & pricing for on-off road traction) |X | |

|Shock absorbers – included |X | |

| | | |

| |X | |

| | | |

| | | |

|DESCRIPTION |Check if as |Describe fully if |

| |Specified or |not as specified |

| |Exceeds | |

|4. Rear axle, suspension & tires: |

|Axle - Single speed full floating, 13.500lb capacity (with options and pricing) |X | |

|Ratio – 5.13:1 w/limited slip (vendor to work with DNR for axle ratios depending on | | |

|application) |X | |

|Suspension – multi-leaf, 15,000lb capacity with brackets | | |

|riveted to frame (with options & pricing for air) | | |

|Shock absorbers - included |X | |

|Rear stabilizer bar | | |

|Rear wheel – 19.5”x 6.75 steel disc wheel, 8-bolt | | |

|Tires – 245/70R19.5 (with options & pricing for on-off road traction) |X | |

|Matching spare tire and wheel |X | |

| |X | |

| |X | |

| | | |

| |X | |

|5. Brakes: |

|Four wheel Anti-lock Braking System |X | |

|Four wheel disc brakes with 15” x 1.5” rotors minimum |X | |

|Four piston calipers front, two piston calipers rear | | |

| |X | |

|6. Coolant: |

|Coolant capacity of approx 27 quarts fluid. |X | |

|Coolant protection to -30˚ F |X | |

|7. Electrical: |

|Alternator output capacity of 150 amps |X | |

|Dual group 27 batteries, minimum 1500 c c amp @ 18˚ C |X | |

|Auxiliary up-fitter switch bank separately fused, 6 switch minimum | | |

|Tow package availability with 7 wire harness |X | |

| | | |

| |X | |

|D. MISC: |

|Governor road speed @ 65mph |X | |

|Hystec style cab to frame mounts (air if available) |X | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

|DESCRIPTION |Check if as |Describe fully if |

| |Specified or |not as specified |

| |Exceeds | |

|E. WARRANTY: |

|2 year, unlimited miles on entire vehicle |X | |

|3 year, unlimited miles on transmission, with options for additional | | |

|5 year, 100,000 miles on engine | | |

|2 year, unlimited on rear axles | | |

|Emissions warranty, 5year, 100,000 miles | | |

|Include breakdown of “entire vehicle” warranty options | | |

|Operating this vehicle at or near max GVW rating will not constitute an overloading | | |

|condition or void warranties | | |

|DNR requires the option to be a warranty repair facility and perform warranty repairs in | | |

|communication with the Dealer/Manufacturer. | | |

| | | |

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download