NF10W VDSL/ADSL WiFi Modem Router
NF10W ? VDSL/ADSL WiFi Modem Router
Firmware Release Notes
Copyright
Copyright? 2016 NetComm Wireless Limited. All rights reserved.
The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of NetComm Wireless. Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
Note: This document is subject to change without notice.
This document covers the following products: NetComm Wireless VDSL/ADSL WiFi Modem Router (NF10W)
1.0 - Initial document release
DOCUMENT VERSION
Table 1 - Document Revision History
DATE 27 May 2016
NetComm Wireless NF10W Firmware Release Notes 2
Rev 1.0
Firmware Details
ITEM Model Product Name Date Firmware Version Official / Beta Firmware File Name File Size MD5 Checksum
DESCRIPTION NF10W VDSL/ADSL WiFi Modem Router 27 May 2016 R5B016 Official NF10W.NC.AU-R5B016.EN_Upgrade 10.5 MB 0719E5B09582774360563228C063A734
Firmware Upgrade Instructions
1. Connect the supplied RJ45 Ethernet cable from one of the Ethernet Ports on the back of the device to your computer. 2. Connect the supplied power adapter to your router and press the on/off button to power the router on. 3. Allow 60 ? 90 seconds for the NF10W to power up. 4. Open a web browser (e.g. Internet Explorer, Firefox, Safari, etc) and type into the address bar and
press Enter. 5. At the login screen, type admin into both the Username and the Password fields and click OK. 6. Select Management and then Update Firmware from the menu on the left side of the screen. Select Choose File to locate
and load the firmware (NF10W.NC.AU-R5B016.EN_Upgrade)
Rev 1.0
NetComm Wireless NF10W Firmware Release Notes 3
7. Click Update Firmware to proceed. The process will take a few minutes until the router reboots itself. 8. Once the upgrade is done, you will be brought into the Status page. Make sure the current firmware is R5B016.
9. Using the menu on the left side of the screen, select Management then Settings and then Factory Reset. Click the Restore Default Settings button to reset the device
Note: You must reset the router to the default settings after the firmware upgrade to ensure that it functions correctly.
NetComm Wireless NF10W Firmware Release Notes 4
Rev 1.0
Version History
R5B016
New Features Added Keepalive function on ETH WAN connection. Added DHCP options under LAN page. Added Bridge option in ADSL and VDSL Quick Setup. Added support for PPPoA mirroring.
Enhancements Changed software version format. Changed MTU size to 1492 by default. Changed SRA to be enabled by default. Fixed an issue where VDSL will not connect if some of the DSL options are not enabled on the DSL page. Fixed an issue where admin and support user accounts could not access the device remotely. Fixed a USB LED issue. Fixed an issue where the user could not specify 802.1p via the QoS page. Optimized the Quick Setup wizard. Other minor cosmetic enhancements to the user interface.
R5B014 ? Initial production release
New Features None.
Enhancements None.
Rev 1.0
NetComm Wireless NF10W Firmware Release Notes 5
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- amg750 series industrial 4g cellular router
- how to configure ldap server qsan
- nf10w vdsl adsl wifi modem router
- us guid cl mmiai masergy
- cisco dna center air gap deployment guide
- voip telephone basic programming guide hubbellcdn
- app note quicksmart
- smart business communications system unified
- autodome 700 series ip ptz camera gfk etilize
- pptn0001 pocketport configuration command reference
Related searches
- xfinity free modem upgrade
- xfinity free modem upgrade 2018
- comcast xfinity modem reset
- best modem for comcast xfinity
- 192 168 1 1 modem wireless router
- 192 168 0 1 modem configure
- xfinity modem update
- centurylink modem setup
- comcast modem username and password
- comcast modem password
- xfinity modem rental
- change comcast modem password