SmartRG Gateway User Manual

/ GATEWAY USER MANUAL

For all Broadcom Chipset-based models including: ADSL 3xx series VDSL 5xx series

Release 3.5 June 2016

Table of Contents

Table of Contents

1

Disclaimer

3

Copyright and Trademarks

3

FCC Interference Statement

3

FCC Caution

3

Safety Warnings

4

Welcome!

5

Purpose & Scope

5

Intended Audience

5

Getting Assistance

5

GETTING FAMILIAR WITH YOUR GATEWAY

6

LED Status Indicators

6

Connections

6

External Buttons

8

Installing your SmartRG Gateway

9

Logging in to your SmartRG Gateway's UI

9

Device Info

11

Summary

11

WAN

12

Statistics

14

Statistics - WAN Page for SR515ac Gateway 16

References

21

Route

21

ARP

22

DHCP

23

ADVANCED SETUP

24

Layer2 Interface

24

WAN Service

30

Ethernet Config

44

MoCA

45

LAN

47

NAT

50

Security

55

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT ? 2016

Add a MAC Filtering Rule Parental Control Quality Of Service

Supported DSCP Values Routing DNS DSL DSL Bonding UPnP DNS Proxy Interface Grouping IP Tunnel IPSec Certificate Multicast WIRELESS Basic Security MAC Filter Wireless Bridge Advanced Station Info DIAGNOSTICS Diagnostics Fault Management Ethernet OAM Ping Trace Route to Host Management Settings

59 60 62 64 73 77 81 84 86 87 88 89 92 94 98 100 100 103 112 113 114 118 118 118 119 120 122 122 123 123

1

System Log

127

Security Log

129

SNMP Agent

130

Management Server

131

Internet Time

136

Access Control

137

Add an Account

137

Modify or Delete an Account

138

Default Passwords

140

Update Software

144

Reboot

144

APPENDIX A: ADVANCED FEATURES

146

Connect-and-Surf (Automatic Broadband Con-

nection Configuration)

146

Activation (Automatic ACS Connection Con-

figuration)

146

TR-069 Remote Management: ACS Support 146

APPENDIX B: FEATURE COMPARISON MATRIX 148

Q&A

150

REVISION HISTORY

150

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT ? 2016

2

Disclaimer

SmartRG does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor patent rights of others. SmartRG further reserves the right to make changes to any products described herein without notice. This publication is subject to change without notice.

Any trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners.

Copyright and Trademarks

Copyright ? 2016 by SmartRG, Inc.

The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of SmartRG, Inc.

Published by SmartRG, Inc. All rights reserved.

FCC Interference Statement

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numrique de la classe B est conforme ? la norme NMB-003 du Canada.

FCC Caution

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT ? 2016

3

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

IMPORTANT NOTE: FCC Radiation Exposure Statement:

l This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. l This equipment should be installed an operated with a minimum distance of 20cm between the radiator and your body. l This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Safety Warnings

For your safety, be sure to read and follow all warning notices and instructions.

l To reduce the risk of fire, use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord. l Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks.

ONLY qualified service personnel can service the device. Please contact your vendor for further information. l Use ONLY the dedicated power supply for your device. Connect the power cord or power adapter to the correct supply voltage

(110V AC in North America or 230V AC in Europe). l Do NOT use the device if the power supply is damaged as it might cause electrocution. l If the power supply is damaged, remove it from the power outlet. l Do NOT attempt to repair the power supply. Contact your local vendor to order a new power supply. l Place connecting cables carefully so that no one will step on them or stumble over them. Do NOT allow anything to rest on the

power cord and do NOT locate the product where anyone can walk on the power cord. l If you wall mount your device, make sure that no electrical, gas, or water pipes will be damaged. l Do NOT install nor use your device during a thunderstorm. There may be a remote risk of electric shock from lightning. l Do NOT expose your device to dampness, dust, or corrosive liquids. l Do NOT use this product near water, for example, in a wet basement or near a swimming pool. l Make sure to connect the cables to the correct ports. l Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device. l Do NOT store things on the device. l Connect ONLY suitable accessories to the device.

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT ? 2016

4

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download