IS/IEC 519-1 (1984): Safety in Electroheat Installation, Part 1 ...



Disclosure to Promote the Right To Information

Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.

"1 +, 1 +"

Mazdoor Kisan Shakti Sangathan "The Right to Information, The Right to Live"

"01 ' 5 "

Jawaharlal Nehru "Step Out From the Old to the New"

IS/IEC 519-1 (1984): Safety in Electroheat Installation, Part 1: General Requirements (Superseding IS 9080 (Part 1) [ETD 17: Industrial Electroheating Equipment]

"! $ ' +-"

Satyanarayan Gangaram Pitroda "Invent a New India Using Knowledge"

"! > 0 B "

Bharthari--Ntiatakam "Knowledge is such a treasure which cannot be stolen"

IS/IEC 519-1 (1984) ]Superseding IS 9080 (Part 1) : 19791

ml 73lJTFf*w Indian Standard

SAFETYINELECTROHEATINSTALLATION

PART 1 GENERAL REQUIREMENTS

ICS 25.180.10:13.110

0 BlS 1995

BUREAU OF INDIAN STANDARDS h4ANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

NEW DELHI 110002

December 1995

Price Group 8

Industrial Electroheating Equipment Sectional Committee, ETD 17

NATIONAL FOREWORD

This Indian Standard is identical with IEC Pub 519-1 (1984) `Safetyin electroheat installations - Part 1 : General requirements', issued by the International Electrotechnical Commission (IEC) is being brought out to align the requirements related to safety of persons working in electroheat installation and safety of various types of furnaces and equipments used in these installations in line with the corresponding requirements at the IEC level.

While taking up revision of IS 9080 (Part 1) : 1979 `Safety requirements in electroheat installations :

Part 1 General requirements', the Sectional Committee decided to align the standard with IEC 519-l(l984). It is also envisaged that the following Indian standards will be aligned with corresponding IEC standards :

Indian Standard Under Revision

Corresponding IEC Publication

Present Stage

1) IS 9080 (Part 1) : 1979 Safety

requirements in electroheat

installations : Part 1 General

requirements

2) IS 9080 (Part 2/Set 1) : 1979

Safety requirements in

electroheat

installations :

Part 2 Particular require-

ments for resistance heating

equipment, Section 1 Protec-

tion in direct resistance heat-

ing installations

3) Section 2 Protection in in-

direct resistance heating in-

stallations

4) Section 3 Protection in potas-

sium and sodium nitrate and

nitrate bath furnaces

5) Section 4 Protection in installations used for drying var-

nishes and other similar

products

IEC Pub 519-1 (1984) Safety in IS/lEC 519-1 (1984) (This electroheat installations- Part 1 : standard) General requirements

IEC Pub 519-2 (1992) Safety in electroheat installations-Part2 : Particular requirements for resistance heating

Formulation of under consideration

standard

Formulation of standard under consideration

Formulation of standard under consideration

Formulation of standard under consideration

6) IS 9080 (Part 3) : 1973 Safety requirements in electroheat installations : Part 3 Particular requirements for mains and medium frequency induction furnace installations

7) IS 9080 (Part 4) : 1981 Safety requirements in electroheat installations : Part 4 Particular requirement for arc furnace installations

IEC Pub 519-3 (1988) Safety in electroheat installation - Part 3 : Particular requirements for mains and medium frequency induction furnace installations

Formulation of standards under consideration

IEC 519-4 (1995) Safety in Formulation of electroheat installations -Part 4 : under consideration Particular requirement for arc furnace installations

standard

8) Safety in electroheat installations : Part 5 Specification for safety in plasma installation

IEC Pub 519-5 (1980) Safety in New standard IS/IEC 519-5 electroheat installations -Part 5 : Specification for safety in plasma installation

9) Safety in electroheat installation : Part 6 Specification for safety in industrial microwave heating equipment

IEC Pub 519-6 (1982) Safety in electroheat installations - Part 6 : Specification for safety in industrial microwave heating equipment

Formulation of standard under consideration

(Continued on third cover)

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download