EMG2881-T20A QSG 180103 v7
EMG2881-T20A
Dual-Band Wireless AC1300 Gigabit Ethernet Gateway
Quick Start Guide
ENGLISH
Step 1 Desktop Installation
1
2
See the User's Guide at for more information, including customer support and safety warnings. EU Importer
Zyxel Communications A/S Gladsaxevej 378, 2. th. 2860 S?borg, Denmark. US Importer Zyxel Communications, Inc 1130 North Miller Street Anaheim, CA 92806-2001 Copyright ? 2018 Zyxel Communications Corp. All Rights Reserved.
EN 1 Connect the stand with the bracket holes facing up. 2 Place the device vertically on a smooth level surface.
Step 2 Hardware Connections
3
4
EN 3 Use the blue Ethernet cable to connect the WAN port to a xDSL/Cable/Fiber modem. 4 Connect a computer to the LAN port using the Ethernet cable (optional). 5 Connect the power cable to the EMG2881-T20A and press the power button. 6 Check the LEDs.
WAN
LAN
OR
5
6
POWER ON
POWER
POWER INTERNET
WLAN
White ON - Power is on.
POWER
Off - Power is off.
White ON - Internet is ready.
INTERNET
Off - Internet is not ready.
Step 3 WiFi Connection
Using SSID
EN The SSID and Wireless Key are on the device label. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.
SSID(2.4 GHz): Zyxelxxxxxx SSID(5 GHz): Zyxelxxxxxx Wireless Key: xxxxxxxxx
WiFi Zyxelxxxxxx
Connect
1/2
Using WPS
WPS
More than 1 second
within
2 minutes
WLAN
Amber Blinking - Connecting to 2.4GHz or 5GHz WiFi via WPS.
Off - WPS process is inactive.
WiFi WPS setup
Android Only
Web Configurator (Optional)
FCC ID I88EMG2881-T20A IC 2468C-EMG2881T20A
IP Address: 192.168.1.1 Account: admin Password: xxxxxxxxx
EMG2881-T20A Username admin Password xxxxxxxxx Login
EN 1 Press the WPS button until the WiFi 2.4G and 5G LEDs light up in amber. 2 Press the WPS button on the client. If the WPS method fails, perform the Using SSID method.
EN Open a web browser and go to . Enter the default Username (admin) and admin login password (on the device label), and then click Login. Go to System Status to check your Internet status. Go to Configuration > WAN > Management WAN > Modify to set up your Internet. Go to Configuration > WAN > Wireless > Wireless to change your SSID.
System Status Interface Status
Wall Mounting (Optional)
x2 x2
Configuration
? WAN Management WAN
? -------? -------? --------
100mm
EN (Optional) Drill two holes at the distance of 100mm apart. Insert screw anchors and screws (not provided) into the holes. Attach the bracket to your EMG2881-T20A with the bracket holes
facing down. Hang it on the screws.
Troubleshooting
The EMG2881-T20A doesn't turn on. - Make sure you are using the power adaptor or cord included with the EMG2881-T20A. - Make sure the power cable is connected. - Make sure the power adaptor is connected to an appropriate power source. Make sure the power source is turned on.
I cannot see or access the Login screen in the Web Configurator. - Make sure you are using the correct IP address. ? The default IP address is 192.168.1.1. ? If you changed the IP address, use the new IP address. ? If you changed the IP address and have forgotten it, you have to reset the device to its factory defaults. - Check the hardware connections, and make sure the LEDs are behaving as expected. - Make sure your Internet browser does not block pop-up windows and has JavaScript enabled. - Make sure your computer and the EMG2881-T20A are in the same subnet. - Make sure you have entered the Username and Password correctly. The default Username is admin, and the default Password is assigned randomly (on the device label). If this does not work, you have to reset the EMG2881-T20A to its factory defaults.
I cannot access the Internet. - Check the hardware connections and the LED behavior. - Make sure the WAN port is connected to a broadband modem or router with Internet access. Your computer and the EMG2881-T20A should be in the same subnet. - Make sure you entered your ISP account information correctly. - If you are trying to access the Internet wirelessly, make sure that you enabled the wireless LAN in the EMG2881-T20A and your wireless client. Make sure you use the same wireless settings in the
wireless client and the EMG2881-T20A. - Disconnect all the cables from your EMG2881-T20A and reconnect them.
2/2
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- setup guide linksys e2100 router megapath
- welcome to blaze
- open modem 192 168 1 1 provide username admin password
- quick start guide cisco
- zte zxhn f660 ont configuration step 01 type in the
- zyxel password changing procedure
- grandstream networks inc
- prolink h5004nk
- emg2881 t20a qsg 180103 v7
- webconfig api user s manual