Package Contents - D-Link

Package Contents

DIR-869 AC1750 Wi-Fi Router

Wi-Fi Configuration Card

Power Adapter

Quick Install Guide

Ethernet Cable

If any of the above items are missing, please contact your reseller.

Minimum Requirements

Network Requirements:

? An Ethernet-based broadband modem

Web-based Configuration Requirements

Computer with the following: ? Windows? or Mac OS? X operating system ? An installed Ethernet adapter or wireless adapter ? Internet Explorer? 9 or higher, Safari? 5.1 or higher, Firefox? or ChromeTM

Antenna Orientation

The DIR-869 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, orient the antennas at an angle, pointing outward and away from the base unit.

115?

2

Hardware Overview

12

3

4

5 67

1

Reset Button

Press and hold the reset button with a paper clip for 10 seconds to reset the router to the factory default settings.

2 WPS Button Press to start the WPS process. The LED will blink white.

3 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles.

4 Internet Port Connect your broadband modem to this port using an Ethernet cable.

5 Power Port Connect the supplied power adapter.

6 Power Button Press to power the router on and off.

Select Router (left) or Extender mode (right). To change modes, move the switch to the desired position and after five seconds the router 7 Mode Switch will reboot into the desired mode. Router is the default mode. For information on how to use the router in Extender mode, refer to the user manual located at .

LED Behavior

Color Orange Orange White White None

Status Solid Blinking Solid Blinking Off

Description Router is booting up or in the reset process. Router is in recovery mode. Router is working properly. The WPS process is in progress. Router is powered off.

3

Before You Start

? Users with DSL providers - If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information.

? Users with Cable providers - Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to five minutes.

? Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to "bridge" mode so the DIR-869 router can work properly. Please contact your ISP or refer to the user manual for your modem/router device.

Connect your Router

1 Unplug the power to your DSL or Cable modem.

Modem

2 Unplug the power to your DSL or Cable modem. Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem.

Ethernet Port

Modem

4

DIR-869

TT Router

RESET WPS

1

2

3

4

Ethernet

DC IN POWER

Extender

T

Ethernet Cable

Internet Port (yellow)

3 Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router. You can also connect wirelessly to the router with your computer. Use the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password of the router. Complete steps 4 and 5 before attempting to connect.

RESET WPS

1

2

3

4

Ethernet

DC IN POWER

Router Extender

T

DIR-869

Ethernet Cable

Computer

4 Plug the power back into your DSL or cable modem. Please wait about one minute before continuing.

Modem

DIR-869

RESET WPS

1

2

3

4

Ethernet

DC IN POWER

Router Extender

Computer

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download