EchoLife HG8245 GPON Terminal Quick Start
[Pages:18]EchoLife HG8245 GPON Terminal Quick Start
EchoLife HG8245 GPON Terminal V100R002C06
Quick Start
Issue
01
Date
2011-06-30
BOM number 31505131
Huawei Proprietary and Confidential Copyright ? Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support. Please feel free to contact our local offices or headquarters.
Huawei Technologies Co., Ltd.
Address: Web site:
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China
Tel:
0755-28560000 4008302118
Fax:
0755-28560111
Email:
support@
Copyright ? Huawei Technologies Co., Ltd. 2011.All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The information in this document is subject to change without notice. Unless otherwise stated, this guide serves only as a guide. All statements, information, and recommendations in this document do not constitute a warranty of any kind, expressed or implied.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Huawei Proprietary and Confidential Copyright ? Huawei Technologies Co., Ltd.
Safety Precautions
To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device.
Basic Requirements
Keep the device dry when it is stored, transported, and used. Prevent any violent collision when the device is stored, transported, and
used. Install the device in strict compliance with the requirements of the supplier. Do not disassemble the device without permission. In the case of a
device fault, contact the authorized service center. Do not change the structure, safety design, or performance design of
the device without prior authorization. Observe relevant laws and regulations and respect legal rights of others
when using the device.
Environmental Requirements
Install the device in a well-ventilated environment that is free from direct sunlight.
Keep the device clean and free from dust. Keep the device away from water sources or damp areas. Do not place any object on the device, so that the device will not be
damaged due to overheating or deformation. Reserve a space of at least 10 cm above and around the device for heat
dissipation. During the installation, keep the device away from heat sources or
exposed fire sources such as electric heaters and candles. During the installation, keep the device away from electric appliances
that generate strong magnetic or electric fields, such as microwave ovens, refrigerators, and mobile phones.
Instructions for Cleaning
Before cleaning the device, stop the device, switch off the power, and disconnect all cables, including the power cable, optical fiber, and network cable.
Use a clean, soft, and dry cloth to clean the shell of the device. Do not use any cleaning agent or spray to clean the shell of the device.
1
Safety Precautions
Instructions for Use
Use only the accessories delivered or recommended by the supplier, for example, the power adapter and battery.
The power supply voltage of the device must meet the requirements for the input voltage of the device.
Keep the power plug clean and dry to prevent electric shocks or any other hazard.
Dry your hands before connecting or disconnecting cables. Stop the device and switch off the power before connecting or
disconnecting cables. Switch off the power and disconnect all cables, including the power
cable, optical fiber, and network cable, during periods of lightning activities. Switch off the power and then remove the power plug if the device is to be unused for a long time. Prevent water or other liquid from entering the device. If any liquid enters the device accidentally, immediately switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable. In the case of a device fault, contact the authorized service center. Do not crush, pull, drag, or excessively bend the cables as doing so may damage the device and cause the device to malfunction. Do not use damaged or deteriorating cables. Do not look into the optical port without eye protection. If an abnormality occurs, for example, smoke, unusual sound, and smell, stop the device immediately, switch off the power, disconnect all cables (such as the power cable, optical cable, and network cable) to the device, and contact the authorized service center. Prevent objects, such as metal, from entering the device through the heat dissipation hole.
Do not scratch or abrade the shell of the device. Otherwise, the fallen coating may lead to device abnormalities (such as short-circuit) and bodily allergy.
Keep the device out of the reach of children as the components or accessories may be swallowed.
Keep the running device at least 20 cm away from the human body.
Environmental Protection
Dispose of the device or batteries properly and hand them over to the certified recycling station.
Dispose of the packing materials, expired batteries, and old or abandoned devices in accordance to local laws and regulations (recycling them is strongly recommended).
2
Packing List
After opening the product packaging, check each item against the following checklist. Contact the supplier if there are any discrepancies.
GPON terminal
Power adapter
Quick Start
Network cable
NOTE
The figures shown in this document may differ from the actual products, but the difference does not affect the functions of the products.
3
Product Overview
Appearance and ports of the HG8245
1 Optical port
2 Ethernet port
4 Power switch
5 Power port
7 Backup battery monitoring port 8 USB port
10 WPS switch
11 RESET
4
3 POTS port 6 Indicator 9 WLAN switch
Installing the GPON Terminal
NOTE 1. HG8245 can be mounted onto a wall or be placed on a workbench. 2. Other installation modes are not allowed. Perform the following operations to mount HG8245 onto the wall. Step 1 Mark the positions of two holes, keeping the holes 72 mm from each other. Step 2 Select a proper drill according to the outer diameter of the screws. Use a
hammer drill to drill the marked positions on the wall. Then clean the wall and install two expansion bolts. Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads of the screws 3 mm over the wall. Then install the GPON terminal to the screws.
Place the GPON terminal on the workbench.
5
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- echolife hg8245 gpon terminal quick start
- user guide bh
- stc modem 014 firmware 21
- all access data at a glance change the router settings
- تاددﺮﺗ داﺪﻋإ ﺔﻘﯾﺮﻃ 5ghz و 2 stc
- configuration du wifi sur le modem hg658v2
- get your ultra broadband ready business gateway up and
- tonton security
- configuration du modem hg658v2 topnet
- digital free library adafruit industries
Related searches
- bell street cruise terminal seattle
- quick start budget worksheet
- greyhound bus terminal indianapolis in
- hotels near pier 91 cruise terminal seattle
- quick start up business loans
- cruise terminal parking seattle wa
- greyhound bus terminal columbus ohio
- dave ramsey quick start budget form
- python quick start guide
- microsoft teams quick start pdf
- quick start guide iphone 11
- amazon fba quick start guide