Ford Model A Catalog - QuietRide
Automotive Thermal Acoustic Insulation
1928-31 Ford Model A Catalog
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
?Reduce Road Noise ?Reduce Exhaust Harmonics ?Eliminate Mechanical Noise ?Stop Body Panel Vibration ?Reduce Radiated & Reflected Heat ?Stop Audio System Vibration
Pre-Cut Ready to Install Kits Year ? Make ? Model Specific
The Coolest Cars Have QuietRIDE Inside! TM
Kits are available for these Vehicles See AcoustiTrunk Catalog
Firewall Insulator
Fits under dash against the firewall bulkhead.
Roof Kit
Roof & Quarter Panels above beltline.
Trunk Floor Kit
Trunk Floor & Tire Well
Body Panel Kit
All Panels below the beltline including Package Tray, Seat Divider, Rear Wheel Wells, Fenders, Rear Quarters and Tail Panels
Cowl Kit
Panels between the firewall and front door of the vehicle.
Floor Kit
Front Floor, Rear Floor, Transmission Hump/ Driveline
Door Kit
All Doors
Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: ?Dynamat Xtreme ?Heat Shield Barrier Insulation ?Spray Adhesive ?Seam Tape ?Illustrated Instructions
For more information contact us at: info@
?2003-21 ?Prices Subject to Change Without Notice
Order Line: 888-777-3410 Tech Line: 209-942-4777 Fax: 877-720-2360
1122 S. Wilson Way Ste. #1, Stockton CA, 95205
Automotive Thermal Acoustic Insulation
193159-22081-34 1 Ram/DFoodrgdeMTordueclkACCaatatalologg
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
Introducing a multi-stage, automotive insulation and sound damping system to give Model A cars and Trucks the "quiet riding comfort" found in to-day's new cars. AcoustiSHIELD kits are designed on current "state-of-the-art" auto acoustic technol-ogy, to insulate and control the noise, vibration and heat in the passenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions----everything you need to do the job right.
Turn Your Model A into "Quiet Riding Comfort"
Stage 1 Sound Damper Pads
Stage 2 Heat Absorber/Barrier Panels
The first stage consists of pre-trimmed, self-adhesive, Sound Damper Pads, bonded to strategically located trouble spots on the floor pan and roof of the vehicle to control body panel vibration and noise. These spots are mapped and labeled in detailed instructions which are included in the kit.
The second stage uses a high-tech absorber/barrier material, bonded to the body panels, to both sound deaden and insulate the vehicle from radiant heat penetration from the engine and road. Each absorber panel is cut to the correct shape and contour and is mapped and labeled in the detailed instructions.
Kits Include: ? Stage 1 Pre-Sized Sound Damper Pads
? Stage 2 Pre-Trimmed Heat Absorber / Barrier Panels, Spray Adhesive and Sealing Tape ? Complete Illustrated Installation Instruction
Dealer program available. For more information contact us at info@
Automotive Thermal Acoustic Insulation
A Roof to Road Solution to Control Passenger Cabin Noise, Vibration and Heat TM
AcoustiSHIELD Product Description
AcoustiShield is a two-stage thermal acoustic automotive insulation product designed to control Noise, Vibration and Heat--the three major issues that affect passenger cabin comfort. Kits include pre-cut, ready-to-install Dynamat Xtreme? damper pads and HeatShield Barrier Insulation panels which are packaged separately for easy installation. Kits come with uniquely illustrated installation sheets, spray adhesive and seam tape. Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor, Doors and Body Panels, which includes the seat divider, package tray and rear wheel wells. The installation of a complete AcoustiShield kit typically will reduce passenger cabin noise by 12 to 17 decibels. To put this in perspective, a 10-decibel reduction is a 50 percent reduction in noise that the human ear can easily detect. Barrier insulation will reduce radiant heat by as much as 25 degrees.
AcoustiShield is a Two-Stage Process
Stage-One of the AcoustiShield process is the application of small pre-cut Dynamat Xtreme? damper pads and strips to auto body sheet metal to greatly reduce the vibration and noise produced by these panels from entering the passenger cabin. Stage-Two of the AcoustiShield process is the application of pre-cut HeatShield Barrier Insulation panels to the auto body sheet metal to encapsulate any remaining vibration/noise and to thermally insulate the vehicle.
Quiet Ride Solutions is the only source for the authentic
"Chicken Track Texture" Found on Early Ford Cars Firewall Insulators
Headliners and other interior panels 1928 through 1948
It was not until 1932 that Ford cars and trucks were delivered drom the factory with a firewall insulator and many restorers can attest to the fact that the Model A is one "hot" car to drive. Quiet Ride Solutions developed these firewall insulators to fit and look like OEM and then added HeatShield Thermal Acoustic Insulation to make them even better.
ABS Firewall Cover Chicken Track Texture
Quiet Ride Solutions has faithfully reproduced the famous "Chicken Track" texture for the firewall insulator covers and related products. The "Chicken Track" texture was used exclusively on Ford interior products and truck headliners, cowl and door panels beginning in 1928 and through the 1948 model year.
Each firewall product is molded to fit over the firewall engine setback and is readyto-install with HeatShield Thermal Acoustic Barrier insulation.
The installation of the firewall uses factory stock accessory holes, so there is no damage to the original firewall. A Hardware mounting pin kit and instruction sheet provides everything needed for installation.
Each Firewall insulator product is molded from an "out of the car" original firewall provided by one of our customers to ensure contour accuracy, mounting hole aligment and fitment.
Year-Make-Model Specific.
Model A Ford Firewall Insulators Panels
for Restorations
FORD 1928-1929 Ford Model A
179
2829-CT Firewall Insulator Panel.
The Chicken Track Grain
ABS Cover is molded to fit
the Stock steel firewall bulk-
head. Includes a double
layer of HeatShield thermal
insulation to stop engine heat
and noise from entering the
passenger cabin. Gives your
interior a smooth and finished
look. Hardware mounting kit
included.
FORD 1930-1931 Ford Model A
179
3031-CT Firewall Insulator Panel.
The Chicken Track Grain
ABS Cover is molded to fit
the Stock steel firewall bulk-
head. Includes a double
layer of HeatShield thermal
insulation to stop engine heat
and noise from entering the
passenger cabin. Gives your
interior a smooth and finished
look. Hardware mounting kit
included.
FORD 1931 Ford Model A Late
179
3100-CT Model Firewall Insulator
Panel with fuel bowl re-
cess. The Chicken Track
Grain ABS Cover is molded
to fit the Stock steel firewall
bulkhead. Includes a double
layer of HeatShield thermal
insulation to stop engine heat
and noise from entering the
passenger cabin. Gives your
interior a smooth and finished
look. Hardware mounting kit
included.
Firewall Insulators can be ordered without holes for custom applications.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- sheet metal steel fiberglass fenders repair panels
- plymouth parts cross reference
- bumper braces for ford
- early chevrolet parts
- 1928 ford tudor model a wiring diagram
- chrome bumpers for ford
- genuine parts quality reproductions early ford
- by justin whitten how it s done roof skin replacement
- ford model a catalog quietride
- auto restying