On request is possible produce carbon parts with another ...

[Pages:12]Carbon fibre fine - standard

real size 1:1

On request is possible produce carbon parts with another structure from our collection - carbon

OVERVIEW

last update 02 / 2016

The customization programme for Bentley Flying Spur

THE OPTIONS FOR YOUR BENTLEY FLYING SPUR V8/W12

Front bumper I. with LED daylight ( chrome grills )

BFS 102 022

with front lip visible carbon fibre without clear coat

middle grill chrome compatbile for cars with or without ACC sensor

air intake grills chrome - 2 parts set left/right with LED daytime running and fog lights

Front bumper I. with LED daylight ( primed grills )

BFS 102 023

with front lip visible carbon fibre without clear coat

middle grill primed compatbile for cars with or without ACC sensor

air intake grills primed - 2 parts set left/right with LED daytime running and fog lights

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.

All prices calculated net, ex works excluding VAT, without painting and modification work.

? all copyrights by MANSORY Design & Holding GmbH

General Terms and Conditions at gtc

last update 11 / 2020 - page 1

THE OPTIONS FOR YOUR BENTLEY FLYING SPUR V8/W12

Front bumper II. with grill mask - primed - front lip visible carbon fibre without clear coat, air intake grills - grill mask not visible carbon fibre - LED daytime running lights compatbile for cars with or without ACC sensor

BFS 102 042

Front bumper II. with grill mask II. for B-sculpture - primed - front lip visible carbon fibre without clear coat, air intake grills - grill mask II not visible carbon fibre - LED daytime running lights compatbile for cars with or without ACC sensor Flying-B-sculpture BFS 00B OEM must be ordered separately

BFS 102 052

Front bumper II. with grill mask - front lip visible carbon fibre without clear coat, air intake grills - grill mask visible carbon fibre without clear coat - LED daytime running lights compatbile for cars with or without ACC sensor

BFS 102 041

Front bumper II. with grill mask II. for B-sculpture - front lip visible carbon fibre without clear coat, air intake grills - grill mask II visible carbon fibre without clear coat - LED daytime running lights compatbile for cars with or without ACC sensor Flying-B-sculpture BFS 00B OEM must be ordered separately

BFS 102 051

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.

All prices calculated net, ex works excluding VAT, without painting and modification work.

? all copyrights by MANSORY Design & Holding GmbH

General Terms and Conditions at gtc

last update 11 / 2020 - page 2

THE OPTIONS FOR YOUR BENTLEY FLYING SPUR V8/W12

Side skirts with lip visible carbon fibre without clear coat

BFS 595 002

Rear bumper with diffuser visible carbon fibre without clear coat, air intakes, exhaust blinds

BFS 802 031

Engine bonnet primed not visible carbon fibre

BFS 210 002

Engine bonnet visible carbon fibre without clear coat

BFS 210 001

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.

All prices calculated net, ex works excluding VAT, without painting and modification work.

? all copyrights by MANSORY Design & Holding GmbH

General Terms and Conditions at gtc

last update 11 / 2020 - page 3

THE OPTIONS FOR YOUR BENTLEY FLYING SPUR V8/W12

Front grill mask

BFS 102 331

visible carbon fibre without clear coat Front grill mask primed

BFS 102 332

not visible carbon fibre compatible with OEM Front bumper model 2004 - 2015

and MANSORY Front bumper I.

Front grill I. mask for B-sculpture

BFS 102 341

visible carbon fibre without clear coat Front grill I. mask primed for B-sculpture

BFS 102 342

not visible carbon fibre Flying-B-sculpture BFS 00B OEM must be ordered separately

compatible with OEM Front bumper model 2004 - 2015

and MANSORY Front bumper I.

Front grill mask for B-sculpture (2016)

BFS 112 341

visible carbon fibre without clear coat

Front grill mask primed for B-sculpture (2016) BFS 112 342

not visible carbon fibre

Flying-B-sculpture BFS 00B OEM must be ordered separately

compatible with OEM Front bumper from model 2016

Flying-B-sculpture

BFS 00B OEM

( Original part - no discount )

compatible only with Front grill I / II mask for B-sculpture

Mirror housing with feet LHD Mirror housing with feet RHD 4 parts set - left/right, visible carbon fibre glossy*

BFS 522 751 BFS 522 761

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.

All prices calculated net, ex works excluding VAT, without painting and modification work.

? all copyrights by MANSORY Design & Holding GmbH

General Terms and Conditions at gtc

last update 11 / 2020 - page 4

THE OPTIONS FOR YOUR BENTLEY FLYING SPUR V8/W12

Rear decklid spoiler - primed primed not visible carbon fibre

BFS 830 842

Rear decklid spoiler - exposed visible carbon fibre without clear coat

BFS 830 841

V8 Engine carbon cover 5 Part set conversion kit visible carbon fibre without clear coat

W12 Engine carbon cover 3 Part set conversion kit visible carbon fibre without clear coat

BFS 000 99 X-pipe center pipe without CAT (catalyst)

only for W12 model till 2014 BFS 000 09 not compatible with model V8

BFS 221 059

Mufflers 2 parts set - left & right, with throttle control

BFS 221 009

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.

All prices calculated net, ex works excluding VAT, without painting and modification work.

? all copyrights by MANSORY Design & Holding GmbH

General Terms and Conditions at gtc

last update 11 / 2020 - page 5

THE ADD ON PARTS FOR YOUR BENTLEY FLYING SPUR V8/W12

Front bumper lip visible carbon fibre without clear coat, air intake grills not compatible with MANSORY Front bumper ( BFS 102 022 )

BFS 102 841

Rear diffuser visible carbon fibre without clear coat not compatible with MANSORY Rear bumper ( BFS 802 031 )

BFS 802 891

Side skirts lip visible carbon fibre without clear coat not compatible with MANSORY Side dkirts ( BFS 595 002 )

BFS 595 751

Add on chrome stripe - for front bumper 2 parts set - left & right

BFS 112 851

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.

All prices calculated net, ex works excluding VAT, without painting and modification work.

? all copyrights by MANSORY Design & Holding GmbH

General Terms and Conditions at gtc

last update 11 / 2020 - page 6

THE OPTIONS FOR YOUR BENTLEY FLYING SPUR V8/W12

MANSORY Lowering Suspension

consisting of: - 2 level adjusting rods front axle - 2 level adjusting rods rear axle Lowering of approx 20-30 mm

With the MANSORY Lowering Suspension you have the optimal symbiosis of excellent ride comfort during normal driving and agile direct response during fast cornering.

The product described in the instructions has been developed, and manufactured under consideration of the necessary safety regulations, and is subject to quality checks. To guarantee flawless, safe function and to eliminate any risk to people or property, this product must be installed properly. Therefore installation should only be carried out by trained specialists, with the specific technical and specialist knowledge required for installation in a vehicle, and the necessary tools. For this, you must carefully read and understand the fitting instructions.

Front axle

MANSORY Lowering Suspension for Bentley Flying Spur 2 level adjusting rods front axle, 2 level adjusting rods rear axle Lowering of approx 20-30 mm

BFS 900 101

Rear axle

Before starting work, check that all parts which should be included are present.

- Raise the vehicle on a suitable lifting mechanism at the position points specified by manufacturer, considering the relevant safety guidelines.

- Take off the original connecting rods from the height sensors on the front and rear axles. - Put the connecting rod on the ball heads on the height level sensors and the holders. - Re-fit the wheels to the vehicle according to workshop instructions. - After installation of the connecting rod, no further adjustments should be made.

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.

All prices calculated net, ex works excluding VAT, without painting and modification work.

? all copyrights by MANSORY Design & Holding GmbH

General Terms and Conditions at gtc

last update 11 / 2020 - page 7

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download