Bid Room FTP Site for General Contractors



PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Air |4600 |208-230/1/60 |24500 |10 |23 |134 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Air |4400 |208-230/1/60 |30000 |10 |23 |148 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Air |6900 |208-230/1/60 |36500 |10 |23 |200 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Air |6600 |208-230/1/60 |45000 |10 |23 |227 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Air |9200 |208-230/1/60 |51000 |10 |23 |230 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |4650 |208-230/3/60 |22000 |10 |-20 |151 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |7350 |208-230/3/60 |25000 |10 |-20 |207 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |6975 |208-230/3/60 |33000 |10 |-20 |234 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |9100 |208-230/3/60 |37000 |10 |-20 |262 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |

| | | |velocity reduces product drying. |

|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |

| | | |servicing |

|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|

| | | |environments |

|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |

|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |

| |installation | | |

| | |• |Sweat inlet connection to reduce leaks (flare connection available|

| | | |as a ship loose option) |

| |Fan Guards and Motors: | | |

|• |Motors plug into wiring harness for easier servicing | | |

|• |Single phase EC motors available factory-installed | | |

|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |730 |208-230/1/60 |7500 |10 |23 |108 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet cleans easily and looks |• |Patented Thermo-Flex? coil design with 5 Yr. limited warranty |

| |attractive | |against internal leaks |

|• |Low height is ideal for low ceiling coolers - larger models are |• |Internally enhanced copper tubing and aluminum fin design for |

| |only 15 inches tall, allowing for maximum headroom and more | |higher efficiency |

| |product storage | | |

|• |Unit designed to be mounted flush against the ceiling or suspended|• |Sweat connections to reduce potential for leaks |

| |on rods | | |

|• |Stainless steel screws prevent rust streaks | | |

|• |Liquid line solenoid wire harness is factory-installed for quick | |Drain Pan: |

| |installation | | |

|• |Removable end panels for complete access to refrigerant and |• |Front hinged drain pan for easy access |

| |electrical components | | |

|• |All electrical components factory wired to terminal board |• |Large diameter drain fitting |

|• |Schrader valve on suction header | | |

| | | | |

| |Drain Pan: | | |

|• |Double drain pan eliminates drain pan sweating | | |

|• |Tapered mounting provides proper slope for condensate drainage to | | |

| |one end of the unit | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |1450 |208-230/1/60 |10000 |10 |23 |111 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet cleans easily and looks |• |Patented Thermo-Flex? coil design with 5 Yr. limited warranty |

| |attractive | |against internal leaks |

|• |Low height is ideal for low ceiling coolers - larger models are |• |Internally enhanced copper tubing and aluminum fin design for |

| |only 15 inches tall, allowing for maximum headroom and more | |higher efficiency |

| |product storage | | |

|• |Unit designed to be mounted flush against the ceiling or suspended|• |Sweat connections to reduce potential for leaks |

| |on rods | | |

|• |Stainless steel screws prevent rust streaks | | |

|• |Liquid line solenoid wire harness is factory-installed for quick | |Drain Pan: |

| |installation | | |

|• |Removable end panels for complete access to refrigerant and |• |Front hinged drain pan for easy access |

| |electrical components | | |

|• |All electrical components factory wired to terminal board |• |Large diameter drain fitting |

|• |Schrader valve on suction header | | |

| | | | |

| |Drain Pan: | | |

|• |Double drain pan eliminates drain pan sweating | | |

|• |Tapered mounting provides proper slope for condensate drainage to | | |

| |one end of the unit | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |1470 |208-230/1/60 |13000 |10 |23 |150 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Heavy-gauge textured aluminum cabinet cleans easily and looks |• |Patented Thermo-Flex? coil design with 5 Yr. limited warranty |

| |attractive | |against internal leaks |

|• |Low height is ideal for low ceiling coolers - larger models are |• |Internally enhanced copper tubing and aluminum fin design for |

| |only 15 inches tall, allowing for maximum headroom and more | |higher efficiency |

| |product storage | | |

|• |Unit designed to be mounted flush against the ceiling or suspended|• |Sweat connections to reduce potential for leaks |

| |on rods | | |

|• |Stainless steel screws prevent rust streaks | | |

|• |Liquid line solenoid wire harness is factory-installed for quick | |Drain Pan: |

| |installation | | |

|• |Removable end panels for complete access to refrigerant and |• |Front hinged drain pan for easy access |

| |electrical components | | |

|• |All electrical components factory wired to terminal board |• |Large diameter drain fitting |

|• |Schrader valve on suction header | | |

| | | | |

| |Drain Pan: | | |

|• |Double drain pan eliminates drain pan sweating | | |

|• |Tapered mounting provides proper slope for condensate drainage to | | |

| |one end of the unit | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |1300 |208-230/1/60 |10449 |10 |23 |48 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Aluminum textured panels |• |Cross-fin cooling coils with corrugated aluminum fins spaced 6 FPI|

| | | |& 3/8" OD staggered copper tubes provide optimum heat transfer |

|• |Front Access to electrical and refrigeration components |• |Generous coil surface helps to maintain steady room temperature |

| | | |and minimize product shrinkage |

|• |Small, low profile physical cabinet size with optimized interior |• |Coils are dehydrated and sealed at the factory |

| |space | | |

|• |The electrical board is front facing for easy access |• |Sweat connections to reduce potential for leaks |

|• |Internal panels are isolated for quiet operation | | |

|• |Liquid line solenoid wire harness factory installed for quick | |Fan Guards and Motors: |

| |installation | | |

|• |Pre-drilled holes on the back of the unit for room thermostat and |• |Motors are factory-wired to unit junction box for fast |

| |controls | |installation |

| | |• |Thermal overload protected motors are resiliently mounted inside |

| | | |the unit to assure minimum noise level |

| |Drain Pan: |• |EC motors (optional) available factory-installed |

|• |Drain fitting is located to the back of the unit with larger | | |

| |diameter | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |2100 |208-230/1/60 |13932 |10 |23 |60 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Aluminum textured panels |• |Cross-fin cooling coils with corrugated aluminum fins spaced 6 FPI|

| | | |& 3/8" OD staggered copper tubes provide optimum heat transfer |

|• |Front Access to electrical and refrigeration components |• |Generous coil surface helps to maintain steady room temperature |

| | | |and minimize product shrinkage |

|• |Small, low profile physical cabinet size with optimized interior |• |Coils are dehydrated and sealed at the factory |

| |space | | |

|• |The electrical board is front facing for easy access |• |Sweat connections to reduce potential for leaks |

|• |Internal panels are isolated for quiet operation | | |

|• |Liquid line solenoid wire harness factory installed for quick | |Fan Guards and Motors: |

| |installation | | |

|• |Pre-drilled holes on the back of the unit for room thermostat and |• |Motors are factory-wired to unit junction box for fast |

| |controls | |installation |

| | |• |Thermal overload protected motors are resiliently mounted inside |

| | | |the unit to assure minimum noise level |

| |Drain Pan: |• |EC motors (optional) available factory-installed |

|• |Drain fitting is located to the back of the unit with larger | | |

| |diameter | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

PHYSICAL & ELECTRICAL DATA

|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |

|Electric |1950 |208-230/1/60 |16254 |10 |23 |62 |0 ft. |

|FANS |HEATERS |CONNECTIONS (inches) |

|QTY |

•

|DIMENSIONS (inches) |

|A |

|N |P |R |S |

|• |Aluminum textured panels |• |Cross-fin cooling coils with corrugated aluminum fins spaced 6 FPI|

| | | |& 3/8" OD staggered copper tubes provide optimum heat transfer |

|• |Front Access to electrical and refrigeration components |• |Generous coil surface helps to maintain steady room temperature |

| | | |and minimize product shrinkage |

|• |Small, low profile physical cabinet size with optimized interior |• |Coils are dehydrated and sealed at the factory |

| |space | | |

|• |The electrical board is front facing for easy access |• |Sweat connections to reduce potential for leaks |

|• |Internal panels are isolated for quiet operation | | |

|• |Liquid line solenoid wire harness factory installed for quick | |Fan Guards and Motors: |

| |installation | | |

|• |Pre-drilled holes on the back of the unit for room thermostat and |• |Motors are factory-wired to unit junction box for fast |

| |controls | |installation |

| | |• |Thermal overload protected motors are resiliently mounted inside |

| | | |the unit to assure minimum noise level |

| |Drain Pan: |• |EC motors (optional) available factory-installed |

|• |Drain fitting is located to the back of the unit with larger | | |

| |diameter | | |

OPTIONS

Mounted Options:

|☒ Motor: EC | |

Ship Loose Options (by Unit):

|None | |

Ship Loose Options (by System):

|None | |

MINIMUM UNIT CLEARANCES

|[pic] |

[pic]

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download