LTI Power Systems



ProUPS CONFIGURATION SHEET

AC INPUT

|Nominal Voltage (AC) |600V, 480V, 400V, 380V, 208V, or _____ V |

|Input Range (%) |+10%/-15% w/o discharging battery |

|Phase |3 Ø |

|Wire |3 wire |

|Frequency (Hz) | 60Hz or 50Hz |

|Fault Current Protection | 25kA or 65kA |

DC INPUT

|Nominal Bus Voltage |120V (60 cells lead acid/96 cells NiCad) |

| |240V (120 cells lead acid/192 cells NiCad) |

| |360V (180 cells lead acid/288 cells NiCad) |

| |480V (240 cells lead acid/384 cells NiCad) |

| |_____ V ( ___ cells ________) |

|Battery Type | 20 year Wet (Lead Acid) |

| |20 year Valve Regulated (Lead Acid) |

| |10 year Valve Regulated (Lead Acid) |

| |20 year Nickel Cadmium (NiCad) |

| |Other ____________________________ |

|Float Voltage | 2.25 Volts per cell (Lead Acid Batteries) |

| |1.45 Volts per cell (NiCad Batteries) |

|Equalize Voltage | 2.33 Volts per cell (Lead Acid Batteries) |

| |1.50 Volts per cell (NiCad Batteries) |

|Battery End Voltage | 1.75 Volts per cell (Lead Acid Batteries) |

| |1.09 Volts per cell (NiCad Batteries) |

|Fault Current Protection |10kA – 120VDC Bus and 25kA 240VDC and above |

AC OUTPUT

|KVA Rating of Inverter |_____KVA |

|Load Power Factor | 0.8 or 1.0 |

|AC Output Voltage |120V, 220V, 230V, 240V, 120/208V, |

| |277/480V, 347/600V or ____/____ V |

|Phase | SingleØ 2-wire, SingleØ 3-wire, ThreeØ 4-wire |

|Frequency (Hz) | 60Hz or 50Hz |

|Fault Current Protection | 25kA or 65kA |

BYPASS INPUT

|Input Voltage |_____KVA |

|Phase | SingleØ 2-wire, SingleØ 3-wire, ThreeØ 4-wire |

|Fault Current Protection | 25kA or 65kA |

ProUPS CONFIGURATION SHEET

INTERNAL SYSTEM OPTIONS

| |

|Conformal Coating of PCBs |

|Enclosure Gasketing |

|Ground Fault Detector |

|Copper Ground Bus |

|Heat Shrink Tubing on Wire Labels |

|Cold Start – Enables DC startups |

|Circuit Breaker Status Panel |

|Blocking Diode |

|Lockable Circuit Breaker Shrouds |

|Lockable Enclosure Door Latches |

|Terminal Block Covers |

|Load Test Terminal Block |

|EPO – Emergency Power Off |

|Phenolic Nameplates |

EXTERNAL/BALANCE OF SYSTEM OPTIONS

| |

|Bypass Isolation Transformer: _____KVA, Pri. Voltage______, Sec. Voltage______ |

|Electrostatic Shield Copper Windings K-Factor Rating _______ |

|Maintenance Bypass Switch – Remote wall-mounted rotary switch |

|Two Position Three Position Auxiliary Contacts |

|Maintenance Bypass Switch – Remote wall-mounted 3-breaker style switch |

|Auxiliary Contacts |

|DC Disconnect Breaker – Remote wall-mounted |

|Shunt Trip Pad Lockable Auxiliary Contacts Nema 3R |

|Spare Parts Kit – Level I Startup Spares |

|Spare Parts Kit – Level II Emergency Spares |

|Spare Parts Kit – Level III Depot Spares |

|Touch Up Paint |

|10yr VRLA Battery Plant - _____ Minutes of Runtime |

|20yr VRLA Battery Plant - _____ Minutes of Runtime |

|20yr Flooded Battery Plant - _____ Minutes of Runtime |

|20yr NiCad Battery Plant - _____ Minutes of Runtime |

SERVICE OPTIONS

| |

|Start-up and Familiarization |

|Factory Acceptance Testing |

|Factory Training |

|Preventative Maintenance |

|Yearly Bi-yearly Quarterly |

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download