Guideline Specifications - Automatic Fuel Fill Station ...



Guideline Specifications

Automatic Fuel Fill Station with On-board Transfer Pump

Fuel filling system

1. Provide a grade level fuel transfer pumping system with Type 3R lockable steel cabinet enclosure, 20-gallon spill containment; overfill prevention and automatic fill shutoff. This system shall be equal to a Simplex MINI-SMARTPUMP as supplied by Simplex, Inc., Springfield, IL. The MINI-SMARTPUMP shall be used for filling one aboveground fuel oil storage tank. The MINI-SMARTPUMP is for use with class ll, flammable liquids, those having a flash point greater than 100 degrees F: fuel oil, diesel fuel, and kerosene.

2. The MINI-SMARTPUMP shall be supplied installed outdoors upon a concrete pad at a location as specified elsewhere.

3. The MINI-SMARTPUMP shall transfer fuel from a gravity tanker truck to the aboveground storage tank via the pump system on-board the unit, as described below. The MINI-SMARTPUMP shall permit full draining of the truck delivery hose upon completion of fuel delivery.

4. The MINI-SMARTPUMP shall include the following fittings and features:

1. FDEP approved under EQ#706.

2. Steel, weatherproof, lockable containment box with hinged door finished in white epoxy.

3. External stainless steel ground stud for attachment of delivery truck ground cable

4. 2 inch quick disconnect coupling for attachment of users delivery hose

5. Inlet shutoff manual valve

6. Twenty (20) gallon spill containment sump with drain to pump inlet

7. Outlet check valve

8. Outlet shutoff manual valve

9. 1 inch threaded fitting for attachment of outlet pipe to tank

10. Pressure relief valve

5. The MINI-SMARTPUMP shall include a motor driven positive displacement fuel transfer pump as follows:

1. Pump: 25 GPM at [SPECIFY] psi of head, cast aluminum, steel gears & BUNA-N mechanical shaft seal

2. Motor: Totally enclosed, fan cooled, 1.15 S.F., rigid base, 1800 RPM, of proper HP and [single] [three-phase] voltage as shown on plans.

6. The MINI-SMARTPUMP shall include a unit mounted control panel with overfill alarm and shutoff system as described below. The control system shall include:

1. Type 3R rainproof, lockable enclosure with hinged doors.

2. Level sensor assembly with 90 & 95% point level sensors and level transducer.

3. Digital Tank % Level Display

4. High visibility red alarm light: 90% level; stop fill

5. High visibility red alarm light: 95% level; danger overfill

6. High visibility red alarm light: tank leak

7. Auto pump shutoff at 90%; auto pump lockout at 95% and on detection of tank leak

8. Override circuit and 30 second timer to permit override of 90% shutoff to allow pump-out of delivery hose or pump-out of spill containment. 95% and tank leak lockouts cannot be overridden.

9. Ninety (90) dB audible alarm horn activated by 90%, 95% and tank leak conditions. Alarm silence push button.

10. Control power ON-OFF switch and power available indicator

11. Panel illumination lights and control switches of industrial, oil-tight machine tool type

12. Main power input disconnect switch with lockable handle

13. Transfer pump motor starter with overload relay

14. Control power transformer for 120 VAC operation of controls

15. Control power fuses

16. Remote alarm contacts

17. Loss of flow alarm to shut pump down should supply source become empty

7. The MINI-SMARTPUMP system shall be supplied with manufacturers’ 2-year all-parts, all-labor field service warranty.

8. The MINI-SMARTPUMP system shall be supplied with the services of a factory authorized or factory-based field service technician to provide start-up services, including inspection, calibration and first operation.

1. This system shall be a Simplex MINI-SMARTPUMP model: “MSP-2” as manufactured by Simplex, Inc., 5300 Rising Moon Road., Springfield, IL 62711. 386-690-6361.

-- End of Section --

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download