Cavco Sales Used Equipment List



CAVCO SALES

Office: 620-767-7273 Mobile: 785-466-0189 Fax: 620-767-5303

Visit our Website & View All Our Machine Pictures:

E-Mail Us: cavco@

Visit Our E-Bay Store At:

March 1, 2020

[pic] Pictures Are Available On-Line at

We Are Distributors For The Following Manufacturers

Goodson Products - Regis Manufacturing – Silver Seal - Peterson Machine Tool Parts –

Kansas Instruments Parts - Kwik Way Boring Bar Repair Parts & Supplies – Van Norman Flywheel Grinders

Peterson & Van Norman Boring Bar Repair Parts

Used Equipment List

Crankshaft Equipment

CA2130 Crankshaft Polishing KI/Peterson Model CPM-84, 115v. 3,450.00

Machine Comes With: Adjustable Steady rest, 84” Capacity, Mounted Traveling Polishing Unit

With Linear Bearings And 3-Jaw Chuck.

CA2156 Portable Crankshaft 64” – 72” Belt Capacity, 115v. 545.00

Polisher

CA1701 [pic] Camshaft Checking This Is A Piece Made For Checking Bend and Lobe Lift On Camshafts. 475.00

Station Comes With: 1” Travel Dial Indicator, 2-Sets Centers, Quick Lock/Set-Up Tailstock,

34” Length Capacity

CA1871 [pic] Wheel Balancing Stuhr, 36” Capacity, Excellent Condition. 565.00

Stand

CA-HUBS Crankshaft Wheel We Have A Varity Of Used Crankshaft Grinding Wheel Hubs In Stock. Sorry But 150.00 – 250.00

Centers We Can’t Identify Many Of Them But We Can Measure And Send Pictures.

Connecting Rod Equipment & Tooling

CA1942 [pic] Piston Pin Press PMW Open Throat 10 Ton Pin Press, Air/Hydraulic. 1,475.00

Comes With: Press Plate & Ener-Pac Detachable Pump Unit.

CA2123 Piston Pin Press Sunnen Model BP-10, 115v. 1,625.00

CA2157 Connecting Rod Sunnen Model CRH-50, 115v. 1,195.00

Heater

CM6002 [pic] Mandrel Storage Sunnen Model CRG-600, Fair Condition, Cleaned & Ready. 425.00

Cabinet

CA2105 [pic] Rod & Cap Grinder Sunnen Model CRG-500, 115v. 645.00

CA2077 [pic] Rod Checking Fixture Sunnen Model TN-111. Red Unit, Excellent Condition. 575.00

Comes With: TN-46A For Pistons, TN-50A For Rods With Pins, TN-40A Bending

Bar And TN-120A Midget Rod Fixture.

CA2078 Rod Checking Fixture Sunnen Model TN-111. Red Unit, Good Condition. 415.00

Comes With: TN-46A For Pistons And TN-50A For Rods With Pins.

CA1925 [pic] Precision Rod Sizing Sunnen Model AG-300 Precision Sizing Gauge. 1,095.00

Gauge Comes With: 2-Calibration Rings, Adjusting Wrench, Medium & Large Points &

Wrist Pin Comparing Fixture.

CA2014 [pic] Precision Rod Sizing Sunnen Model AG-300 Precision Sizing Gauge. 1,095.00

Gauge Comes With: 2-Calibration Rings, Adjusting Wrench, Medium & Large Points &

Wrist Pin Comparing Fixture.

CA2084 [pic] Precision Rod sizing Arnold Model CR. Size Measuring Range (.650” – 4.750”) 875.00

Gauge No points To Change Just Set and Measure.

CA2003 [pic] Rod & Pin Hone Sunnen Model LBN, 115v. Dry Bench To Machine W/ New Paint And Tested. 575.00

CA2069 [pic] Rod & Pin Hone Sunnen 2-Speed Model LBA-650, 115v. 895.00

Comes With: Mounted On Wood Storage Cabinet, SL Mandrel Set (.720” – 1.200”),

Coolant Pump & Wrist Pin Vise.

CA2070 [pic] Rod & Pin Hone Sunnen 2-Speed Model LBB, 115v. 985.00

Comes With: Mounted On Steel Bench, Separate Coolant Pump, Set SL Mandrels

(.720” – 1.200”), Piston Vise And Wrist Pin Clamp.

CA2079 Rod & Pin Hone Sunnen 2-Speed Bench Model LBA-660, 115v. 755.00

Comes With: Spindle Travel Indicator, Torque Bar, Belt Guard And Coolant Pump.

CA2080 Rod & Pin Hone Sunnen 2-Speed Bench Model LBA-675D, 115v. 780.00

Comes With: Spindle Travel Indicator And Coolant Pump.

CA2090 Rod & Pin Hone Sunnen Model LBB-1499, 6-Speed, 115v, Good Clean Machine. 1,900.00

Comes With: Twin Rod Torque Bar, Gauge Mounting Bracket, Adjustable Coolant

Hose And Spindle Feed Travel Indicator.

CA2099 Rod & Pin Hone Sunnen Model LBA Bench Hone, 115v. 1,075.00

Comes With: Mounted On Work Stand, Coolant Pump, Set Of SL Mandrels Range

(.720 – 1.200”) (In Process)

CA2139 Rod & Pin Hone Sunnen Model LBB-1699, 115v. 4,890.00

Comes With: AG-300 Sizing Gauge, SL-Mandrel Set, & 2-King Pin Mandrels.

Mandrels FAMA/Peterson/KI We Have Acquired A Large Selection Of Diamond Honing Mandrels Used On Peterson, CALL

Honing Mandrels Kansas Instruments/Peterson & FAMA Model “RHM” Connecting Rod Honing Machines.

Diamonds FAMA/Peterson/KI Call For Availability & Prices. We Also Have Blank Diamond Holders For Remounting CALL

Diamond Rod Honing New Diamonds.

Stones

Rod Honing Mandrels We Stock A Large Selection Of Used Connecting Rod & Industrial Honing Mandrels!

Cylinder Head Equipment & Tooling

CA2143 Valve Guide Bore Sunnen Model P-310. 1,275.00

Gauge Comes With: 3-Probes, .312, .344 & .375.

CA2146 Valve Guide Bore Sunnen Model P-310. 1,275.00

Gauge Comes With: 3-Probes, .312, .344 & .375.

CA2144 Valve Guide Hone Sunnen Model P-190. 595.00

Comes With: 3-Mandrels And A Selection Of Stones.

CA2152 Valve Spring Tester Rimac 0 – 250 Lb. Capacity 475.00

CA2035 Cylinder Head T-Hoff Universal Submerged Head Pressure Tester. The Machine Has Been Prepped 2,850.00

Pressure Tester And Is Ready To Work.

CA2056 [pic] Cylinder Head Sold By Ampro But a Copy Of The Master Tool Unit. Reconditioned! 3,400.00

Pressure Tester Comes With: 21 Steel Plates, 46” Length Capacity, All Knobs And Testing Plates

Revised And Ready To Work.

CA2072 [pic] Heated Cylinder Head Manufactured By Donelly Engineering. Uses Heated Water Circulated Through The 1,750.00

Pressure Tester Head To Perform The Test Heated, 220v, 1ph. 43” Capacity.

Comes With: A large Selection Of Custom Testing Plates And Block Off Adaptors.

CA2129 Submerged Cylinder Axe Model UP-1437. 4,250.00

Head Pressure Tester Comes With: 20-Steel Universal Testing Plates, Standard Block-Off Tooling, Pneumatic

Cradle Lift And Butterfly Zip Gun.

CA1927 [pic] Valve Guide & Seat Peterson Model TCM-25, 230v, 3ph. 4,450.00

Machine Comes With: Drill Chuck, Seat Cutter Driver & Selection Of Seat Pocket Cutters,

Pilot Level, Spot Facer & Pilots, Leveling Pilots, Valve Guide Drivers & Core Drill/

Reamer Set.

CA1938 [pic] Valve Guide & Seat IDL Model 550, 115v. 1,575.00

Machine Comes With: New Drive Motor, New Spindle Seals, Work Bench, Seat Pocket Cutters,

Seat Ring Driver, Several Pilots, Domestic Angle Adaptors, Drill Chuck And Core Drills

& Finish Reamers.

CA2101 [pic] Valve Guide & Seat Winona Van Norman Model PH-2000, 230v, 3ph. 3,975.00

Machine Comes With: Air Float Cradle, Pilot Level, Pilots, Valve Guide Spot Facer Kit, Valve

Guide Replacement Kit, Seat Pocket Cutter Kit & Valve Seat Driver Kit.

CA2137 [pic] Valve Guide & Seat Winona Van Norman Model PH-2000, 230v, 3ph. 3,975.00

Machine Comes With: Air Float Cradle, Pilot Level, Pilots, Valve Guide Spot Facer Kit, Valve

Guide Replacement Kit, Seat Pocket Cutter Kit & Valve Seat Driver Kit.

CA2140 Valve Guide & Seat Serdi Model 100, Voltage??. 10,950.00

Machine Comes With: 29 Carbide Pilots, Valve Seat Pocket Cutter Set, 3-Tool Bodies, Vacuum

Tester, Tool Sharpener, Core Drills & Reamers And A Selection Of Inserts.

CA2151 Valve Guide & Seat Sunnen Model VGS-20, 230v, 3ph. 12,975.00

Machine Comes With: Good Selection Of Pilots, Seat Pocket Cutters, VSC Style 3-Angle

Cutting System, Tool Sharpener And An Assortment Of Additional Tools.

CA2103 Valve Refacer Sioux Model 680, 115. 1,295.00

Comes With: Good Stones, Good Dressing Diamonds And Grinding Oil.

CA Valve Refacer Sioux Model 680, 115. 1,850.00

Comes With: Good Stones, Good Dressing Diamonds, Rocker Arm Grinding Attachment

And Grinding Oil.

CA2125 Valve Refacer Winona Van Norman Model VR-1000. Voltage???? 3,850.00

Comes With: A Large Collection Of Dedicated Collets, Linear Bearing Chuck Head

And Heavy Duty Cabinet.

CA2153 Valve Refacer Sioux Model 2001, 115. 2,575.00

Comes With: Good Stones, Good Dressing Diamonds And Grinding Oil.

CA1732 [pic] Valve Refacer Cabinet Sioux Model 644. Very Well Made & Sturdy. 465.00

Comes With: Valve Holder Wings And Wheel & Pilot Rack.

CA2081 [pic] Valve Refacer Cabinet Black & Decker? Well Made, Sturdy And On Wheels. 335.00

CA1788 [pic] Valve Seat Grinding KO Lee Model P302BB, 115v. 745.00

Set Comes With: 1-Stone Holders, Electric Driver, Stone Dresser, 8-Collapsing Pilots,

Pilot Installer/Removal Tool, Metal Storage Box And 25 Various Grinding Stones.

CA1924 [pic] Valve Seat Grinding Black & Decker, 115v. 625.00

Set Comes With: 4-Stone Holders, Electric Driver, Stone Dresser, 4-Groove Top Pilots,

Pilot Installer/Removal Tool, Metal Storage Box And Various Grinding Stones.

CA2054 Valve Seat Grinding Sioux Model 1725A. 965.00

Set Comes With: 3-Stone Holders, Angled Air Driver, Stone Dresser, 13-Pilots,

Metal Storage Box And Various Grinding Wheels..

CA1934 [pic] Air Float Cylinder Peterson Air Float Cradle, 180 Degree Cradle Used To Hold And Adjust Level Of 1,095.00

Head Cradle Cylinder Heads When Doing Valve Guide And Seat Work, 41” Capacity.

CA1935 [pic] Air Float Cylinder Peterson Air Float Cradle, 180 Degree Cradle Used To Hold And Adjust Level Of 1,495.00

Head Cradle Cylinder Heads When Doing Valve Guide And Seat Work, 48” Capacity.

CA2112 [pic] Air Float Cylinder Winona Van Norman, 360 Degree Cradle. Used To Hold And Adjust Level Of 675.00

Head Cradle Cylinder Heads When Doing Valve Guide And Seat Work, 29” Capacity.

Surfacing Equipment

CA1828 [pic] Head & Manifold Dry Peterson Model 50E, 230v, 3ph 1,675.00

Grinder Comes With: Stone Dresser, No Stone, New Mounting Bolts.

CA2037 Head & Manifold Dry Peterson Model 50F, 230v, 3ph 1,850.00

Grinder Comes With: Stone Dresser, No Stone, New Mounting Bolts & new Grinding Wheel.

CA2068 Head & Manifold Dry Van Norman Model 555, 230v, 3ph. 550.00

Grinder Comes With: 10” Stone.

CA2118 Belt Surfacer Kwik Way Model 870, 230v, 3ph. Set Up As A Dry Unit. 3,475.00

Comes With: 40 Grit Belt And New Bearings Throughout.

CA2154 Belt Surfacer Master Tool Model PS-3514, 230v, 3ph. 5,375.00

Comes With: 40& 80 Grit Belts, Workpiece Hold Down Clamps & 14” x 35” Capacity.

CO2061 [pic] Cylinder Head & Storm Vulcan Model 85, 230V, 3Ph. Cutter Plate Has Been Sharpened. 3,675.00

Manifold Mill Comes With: Variable Speed Travel Control, Universal Head Mounting

Plate & Standard Tools.

CA2098 Cylinder Head & Storm Vulcan Model 85, 230V, 3Ph. Cutter Plate Has Been Sharpened. 3,650.00

Manifold Mill Comes With: Variable Speed Travel Control, Universal Head Mounting

Plate & Standard Tools.

CA Cylinder Head & Block Storm Vulcan Model 85B, 230v, 3ph. 7,995.00

Mill Comes With: 18” Indexable Carbide Cutter Plate, Variable Speed Table Travel, Cylinder

Head Mounting Plate, 2-Sets Parallels, And A Selection Of Mounting Hardware.

CA2066 Cylinder Head Wet Kwik Way Model 855, 230v, 3ph. Parts Machine

Grinder Comes With: Standard Mounting Fixtures &Tooling. No Traverse Motor.

CA2121 Head & Block Grinder Berco/Peterson Model RSC-1200, 230v, 3ph. 6,800.00

Comes With: Standard Head & Block Fixturing.

CA2135 Head & Block Grinder Winona Van Norman Model ???, 230v, 3ph. 13,250.00

Comes With: Universal Head & Block Fixturing, Variable Speed Table & Power

Column.

CA2118 Belt Surfacer Kwik Way Model 870, 30v, 3ph. 3,475.00

Comes With: New Bearings & 40 Grit Belt. No coolant System.

CB2049 Flywheel Grinder Peterson Model FG-596, 230v, 3ph. 2,875.00

Comes With: Standard Tooling Package, 6” CBN Wheel & Grinding Coolant.

CA2055 [pic] Flywheel Grinder Schledum Model RVF-600PC, 230v, 3ph. Reconditioned Machine. 4,950.00

Comes With: 5HP Grinding Motor, New Coolant Tank & Pump, Power Column,

6” CBN Grinding Wheel, Standard Tooling, Grinding Coolant & Service Tools.

CA2131 Flywheel Grinder Sunnen/DCM Model SG-5500, 230v, 3ph. 7,650.00

Comes With: Standard Tooling, Power Column, Automatic Feed And CBN Wheel.

Block Boring & Honing Equipment

CA-2400 [pic] New Aftermarket Line 10RY-1800 SOLD

Hone Mandrels 10RY-2100 SOLD

10RY-2400 2,450.00 10RY-2700 2,550.00

10RY-3000 2,650.00

CA2147 Sunnen Line Hone 10RY-3000

Mandrel Comes With: Good Stones And Guide Shoes. 2,450.00

CA2148 Sunnen Line Hone 15RY-3500 3,195.00

Mandrel Comes With: New Stones & Guide Shoes.

CA2149 Sunnen Line Hone 15RY-4000 3,450.00

Mandrel Comes With: New Stones & Good Guide Shoes.

CA2150 Sunnen Line Hone 15RY-4500 3,550.00

Mandrel Comes With: New Stones & Good Guide Shoes.

CA2083 [pic] Cylinder Honing Winona Van Norman Model CH-1000, 115v. 4,850.00

Cabinet Comes With: Flow Over Oil System & Oil Filter, Sunnen Friction Feed Honing Head

Model ANR-275, Adjustable Counter Balance Weight, A Selection Of Stones & New Paint.

CA2097 [pic] Cylinder Honing Master Tool & Equipment, 115v. 3,450.00

Cabinet Comes With: Sunnen AN Style Honing Head, A Selection Of Used Stone Sets, Spring

Assisted Counter-Balance & Oil Pump. (In Process)

CA2116 Power-Stroke Cylinder Sunnen Model CV-616, 230v, 3ph. On Hold

Hone Comes With: Standard Honing Head (3.” – 5.0’) Block Fixturing And Accessories.

CA2076 [pic] Universal Diesel Berco Designed Clamping Fixture For Boring Mill Applications. Pt # AOO.69650 1,850.00

V-Block Boring Fixture A Quick Clamping Universal Fixture Used For Larger Diesel V-Blocks.

BHJ [pic] NIS-VG30-R-AL-T Nissan DOHC V-6 Torque Plate, Aluminum W/ Hardened Inserts 249.00

CA2022 [pic] Sunnen Bore Gauge Sunnen Model CF-1000. Good Condition! 965.00

Setting Fixture Comes With: New Magnifier, 3.0” – 7.0” Standards & Metal Storage Case.

CA2111 [pic] Sunnen Bore Gauge Sunnen Model CF-1000. Very Nice Condition! 1,055.00

Setting Fixture Comes With: New Magnifier, 2.0” – 6.0” Standards, Master Setting Standard & Metal

Storage Case.

CA2119 Dial Bore Gauge Sunnen Model GA2125 Sold

Comes With: Complete 2” to 8” Capacity, .0005” Dial and Plastic Storage Case.

CA2120 Sunnen Bore Gauge Sunnen Model CF-1000, Good Condition. 1,050.00

Setting Fixture Comes With: 2” to 6” Standards & Metal Storage Case.

CM6001 [pic] Line Hone Mandrel Sunnen Model CH-36 Vertical Mandrel Rack For Up To Five Line Honing Mandrels. 425.00

Rack Comes With: New Paint.

CA2050 [pic] Rottler Sharpening Rottler Sharpening Fixture, 115v. 625.00

Fixture Comes With: A Good Diamond Lap & Sharpening Jig.

CA1891 [pic] Portable Boring Bar Rottler Model DA-OB, 115v. Boring Range 2.7” 5.5”. 3,950.00

Comes With: Standard Boring Tools.

CA2039 Portable Boring Bar Kwik Way Model FT, 115v. 500.00

Comes With: Parts Bar For Parts

CA2073 [pic] Portable Boring Bar Kwik Way Model FN, 115v. 4,495.00

Comes With: Standard Boring Tools And Clamp Tooling.

CA2092 Portable Boring Bar Kwik Way Model FN, 115v. 4,550.00

Comes With: Standard Boring Tools And Clamp Tooling. (In Process)

CA2087 Cylinder Boring Rottler Model FA2AB, 230v, 3ph. In Process

Fixture Comes With: 2 Sets Parallels, Standard Production Boring Head, 45 Degree Cradle,

& Standard Boring Tools.

CA2089 Cylinder Boring Berco Model ACP-151, 230v, 3ph. In Process

Fixture Comes With: 2-Sets Parallels, Standard Boring Head, 2-Sets Centering Fingers,

45 Degree Block Cradle, New Paint And Standard Tooling.

CA2122 Cylinder Boring Rottler Model F2B, 230v, 3ph. 8,550.00

Fixture Comes With: Dial Depth Indicator Bracket, 45 Degree Cradle , 30 Degree Cradle,

Tool Sharpening Fixture, Standard Production Boring Head, Block Lift Bar, 2-Sets

Parallels And Standard Boring Tools. The T-Slot Has Had A Professional Repair Due

To Some Damage.

CA2122 Cylinder Boring Rottler Model F2B, 230v, 3ph. 8,550.00

Fixture Comes With: Standard Production Boring Head, Boring Depth Indicator, 45 Degree

Cradle, 30 Degree Cradle, 2-Sets Parallels, A Good Assortment Of Boring Tools, Block

Lifting Bar And Service Tools.

CA1986 [pic] Small Cylinder Boring Kwik Way Model 1291 Triangle Boring Stand . 950.00

Bar & Stand

CA2027 [pic] Engine Boring Stand Early Kwik Way Model 054. 2,350.00

Comes With: Block Deck Parallels, Cable Lift & Clamp Bar.

CA2032 [pic] Engine Boring Stand Peterson/KI Model EBS-90, Manual Lift. 2,950.00

Comes With: New Paint, Deck Parallels And Block Support Jacks,

CO2063 [pic] Engine Boring Stand Winona Van Norman Model UBS-1000. 2,350.00

Comes With: Deck Parallels, Universal Block Tooling

CA2115 Engine Boring Stand Kwik Way Model FH. 2,950.00

Comes With: Several Sets Of Main Adaptor Rings, New Paint & 3-Sets Height Spacers.

Cleaning Equipment

CA2059 [pic] Airless Shot Blaster Peterson/KI Shot Blaster Model AB-2845, 230v, 1ph. 10,450.00

Comes With: Twin Paddles, Dust Collector, Spring Loaded Retaining Bars, New

Neoprene Liner Throughout And A Full Load Steel Shot. This Machine is in Excellent

Condition And Shows Very Little Wear Or Use.

CA2094 Airless Shot Blaster Peterson/KI Shot Blaster Model AB-2845, 230v, 1ph. 9,350.00

Comes With: Twin Paddles, Dust Collector, New Spring Loaded Retaining Bars, New

Neoprene Liner, New Bearings Throughout And A Full Load Steel Shot. A Complete

Reconditioned Machine.

CA2113 [pic] Airless Shot Blaster Steel-A-Brator Head & Manifold Airless Blaster, 230v, 1ph. 3,870.00 Comes With: Spring Loaded Bars For Parts Positioning, Dust Collector, Mesh Style

Parts Basket And 30.5” x 11” Capacity.

CA2117 Airless Shot Blaster KI/Peterson Model AB-604, 230v, 3ph. Needs Some Work But Serviceable. 3,400.00

CA2124 Airless Shot Blaster KI/Peterson Model AB-502B, 230v, 1ph. 5,450.00

Comes With: 2-Head Or Block Capacity, Reversing Impellers, Tumble Cycle Timer,

Spring Loaded Retaining Bars And Dust Collector.

CA2155 Airless Shot Blaster KI/Peterson Model AB-502B, 230v, 1ph. 5,975.00

Comes With: 2-Head Or Block Capacity, Reversing Impellers, Tumble Cycle Timer,

New Cabinet Liner, Spring Loaded Retaining Bars And Dust Collector.

CA2127 Shot Removing KI/Peterson Model SRT-40, 115v. 1,965.00

Tumbler Comes With: Shot Catching Tray And Heavy Duty Lined Barrel.

CA2138 Bead Blasting Cabinet Axe Model SL-46, 115v. 1,925.00

Comes With: Cabinet Lighting And Media Reclaimer.

CA1987 [pic] Spray Washer & KI/Peterson Model SKS-2842E, With RWS-50 Recirculating Rinse Reservoir, 230v, 3ph. 7,950.00

Recirculating Rinse Comes With: 7.5HP Pump, Separate Rise Manifold System & Rinse Water Diverter, 50

Tank Gallon Heated Recirculating Rinse Reservoir With Separate 2HP Rinse Pump, Sequential

Air Operated Rinse Diverter, Dual Wash Rinse Timers, 7-Day Heater Timer And Soak

Tank Basket.

CA2102 [pic] Spray Washer KI/Peterson Model SC-2233E, 230v, 1ph, Electric Heat. 5,685.00

Comes With: 3HP Pump, Lay Down Door With Full Roll-Out Turntable & 7-Day Timer.

CA2133 Spray Washer Axe Model SW-40GEX, 230v, 1ph, Gas Heat. 4,250.00

Comes With: 7.5HP Pump??, Extra Large Hot Tank, 28” x 40” Capacity

CA2104 [pic] Small Parts Tumbler Sioux Model 710, 115v. 965.00

Comes With: Full Load Of Tumbling Media.

CA2141 Twin Basket Small Axe Model TB-20, 115v. 1,850.00

Parts Tumbler Comes With: 2-Removable Tumble Baskets With Full Load Of Media.

CS1026 [pic] Solvent Tank Clean-Master, Large Solvent Parts Washing Tank, Model 90, 45 Gallon Capacity, 115v. 425.00 Comes With: Parts Cleaning Shelf and Castors For easy Positioning. Nice Looking Piece.

CA2114 [pic] Solvent Tank Free Standing Solvent Parts Washer, 115v. 135.00 Comes With: Decent Small Unit.

CA1984 [pic] Thermal Cleaning Steelabrator ; Model BB-93055, 115v. 4,950.00

Oven Comes With: Over Temperature Quench System, Stacking And Work Capacity Of

(41” x 33” x 37”)

CA2085 Thermal Cleaning Peterson Machine/Kansas Instruments Model BK-17, 115v In Process

Oven Comes With: 17 Cubic Foot Capacity, External Loading Cart, New Insulation And

Paint.

CA2093 [pic] Thermal Cleaning Peterson Machine/Kansas Instruments Model BK-58, 115v 10,450.00

Oven Comes With: 58 Cubic Foot Capacity, Loading Cart With Floor Rails,

Complete New Insulation, New Program Controller And New Paint.

CA2132 Thermal Cleaning Peterson Machine/Kansas Instruments Model BK-17, 115v 4,950.00

Oven Comes With: 17 Cubic Foot Capacity, External Loading Cart & Cart Hooks.

CA1553 [pic] Basket Washer Intercont Basket Washer, 115v. Cleans With A Gentle Rocking Motion. 675.00

CO1663 [pic] Shot Tumbler Geoff Belt Type, 230v, 3ph. 1,390.00

Miscellaneous

CA2128 80 Ton H-Frame Nugier Model ??? Air Over Hydraulic. 2,325.00

Hydraulic Press Comes With: 2-Pressing Heads, 2-Sets Press Plates, Traveling Head, Adjustable Height

Cable Assisted Lower Frame, Fast Action Down Feed, Foot Pedal Operation And A

Complete Set Of Nugier Axle Bearing Press Plates.

CA2075 Engine Tear Down Nice Storage Cart/Stands For Engine Components When Tearing Down. 155.00

Parts Cart

CA2038 300# Chain Hoist Wright Model CO1111, 300 Pound Capacity, 115v. 425.00

CA1936 [pic] 3HP Rotary Phase Roto Pulse, 220v, 1ph. Capacitor Start & Run. 575.00

Converter

CO1775 [pic] 40 Ton H-Frame Nugier Model H40-14APBD. 1,850.00

Hydraulic Press Comes With: Air Over Hydraulic Pump, Rapid Down-Feed, Foot Pedal

Operation, Traveling Head, Winch Style Base Plate and 14” Stroke.

CA1540 [pic] Brake Drum Grinder Ammco Model 4850, 115v. 285.00

CA1733 [pic] Brake Rotor Lathe Van Norman Model 415, 115v. 275.00

Comes With: A Good Selection Of Tooling & Mounted On Work Cabinet.

CA2040 [pic] Combination Brake Ammco Model 4000, 115v 1,575.00

Drum & Rotor Lathe Comes With: Standard 1” Brake Tooling Package, 9/16” Small Bar Kit, Spare Rotor

Inserts, Large Work/Storage Bench With Tool Board.

CB2050 [pic] Combination Brake Van Norman Model 204C, 115v. 2,350.00

Drum & Rotor Lathe Comes With: 1” & 2” Arbors And Standard Tooling With A Large Selection Of

Additional Tooling. A 3-Speed Unit With Infinitely Variable Feed Rate. A Heavy Cast

Iron Machine Mounted On a Plate Steel Base Allows For Machining The largest Drums.

CA2126 Combination Brake Rels, Model 204C, 115v. 2,290.00

Drum & Rotor Lathe Comes With: 9/16”, 1” & 2” Arbors And Standard Tooling With A Large Selection Of

Additional Tooling. A 3-Speed Unit With Infinitely Variable Feed Rate. A Heavy Cast

Iron Machine Mounted On a Plate Steel Base Allows For Machining The largest Drums.

CA2134 Combination Brake Van Norman Model 204C, 115v. 1,075.00

Drum & Rotor Lathe Comes With: 1” Arbor And Standard Tooling. Machine Runs But Needs Some Work.

CS1029 [pic] 5HP Air Compressor Kellogg American, 2-Stage, 230v, 3ph. 795.00

Comes With: Completely Tested, New Magnetic Starter & 80 Gallon Tank

We Have A Large Stock Of Used Sunnen Mandrels! Call For Pricing And Availability.

[pic]

[pic]

We Also Stock A Wide Variety Of Used & New Machine Parts & Tooling.

We Have A Large Selection Of New & Used Van Norman Boring Bar Parts.

Need A Sunnen Mandrel Give Us A Call.

We Have A Large Inventory Of Used Tooling & Hard To Find Machine Parts

Give Us A Call For Your

Parts & Supply Needs!

Thank You For Your Business From The Cavco Team:

Dan, Cindy, Cameron, Caleb & Jeff

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download