Engine Installation Best Practice - AutoZone

Engine Installation Best Practices

When installing a remanufactured engine it is recommended the following items be

replaced: (if not already included)

? Engine Oil (Check vehicle specification) ? Air Filter ? Oil Filter ? Fuel Filter ? Spark Plugs ? Plug Wires(if applicable) ? Distributor Cap (if applicable) ? Rotor (if applicable) ? Antifreeze/Coolant ? Thermostat ? Radiator Cap ? Radiator Hoses ? Belts ? PCV Valve, PCV Grommets and Hoses (if applicable) ? Oil Pump (If not included) ? Pick up tube

Note: Inspect for faulty or improperly installed items that can void the Remanufactured Engine Warranty.

Additional recommended items:

? Repair Manual ? Oil Pressure Gauge ? Torque Wrench ? Engine Oiler ? Degreaser ? Shop Towels ? Hand Cleaner ? Engine Cleaner ? Thread Sealant

Inspected, cleaned and/or

replaced prior to

installation:

? Carburetor or Fuel Injection System

? Distributor (if applicable) ? Radiator ? Water Pump ? Intake and Exhaust

manifolds ? EGR Valve ? Harmonic Balancer ? Flex-Plate or Flywheel ? Valve Cover (if not included) ? Timing Cover (if not

included) ? Oil Pan (if not included) ? Engine Mounts ? Transmission Mounts

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download