TEMPLATE LINK FOR TEACHERS TO CONTRIBUTE:

Step 3. Sketch. a .75 diameter circle on the top plane. To be extruded. Step 4. Extrude. from Sketch Plane. Blind in Direction 1, 0.50 inch with a taper of 5deg, check in Draft outward. Blind in Direction 2, .5 inch with a taper of 5deg, no check in Draft outward. Step 5. Assign the Wood Beech . material. Step 6. Save. the file. Step 1. Start a . New. Assembly for the light bulb. Step 2 ... ................
................