WINCHESTER MODEL 1895 RUSSIAN MUSKET - VGCA
[Pages:17]WINCHESTER MODEL 1895 RUSSIAN MUSKET
By Marc Gorelick, VGCA, PACA, OGCA, FDHAS
The Model 1895
The Model 1895 was the first Winchester rifle to feature a fixed box magazine located under the action instead of the tubular magazine design of previous Winchester lever action rifles. This allowed the rifle to safely chamber military and hunting cartridges with the new spitzer bullets. The M1895 was also the last of the lever-action rifles to be designed by John Browning, and featured a rear locking bolt as in his previous designs. The Model 1895 is the strongest lever-action rifle Winchester produced, designed to handle the increased pressures generated by the more powerful smokeless powder cartridges entering common use at the time of its introduction.
Fig 1 ? Winchester Model 1895 Russian Musket Photo Courtesy of National Firearms Museum
Winchester produced some 425,881 Model 1895s between 1896 and the early 1930s (different sources list different dates for the end of production, citing between 1931 and 1936). The new model was offered in variety of calibers that were previously only available in Winchester single shot rifles, including the .30-40 Krag (.30 US or .30 Army), .38-72, and .40-72. In 1898 the .303 British was added to the lineup, followed by .35 Winchester (1903), .405 Winchester (1904), .30-03 (1905), .30-06 (1908) and finally 7.62mm x 54R (7.62mm Russian). As with most Winchester arms of the era, the guns were produced in a variety of models, including carbines (22" barrels), rifles (typically 24"-26" barrels) and muskets (military configuration with sling swivels, 28" barrels and bayonet lugs) and a couple of special "NRA" models with 24" and 30" barrels respectively. Blued barrels and receivers were standard. The Russian contract rifles were of the musket pattern. In the late 19th century the term "musket" meant a long infantry rifle with a stock extending almost to the muzzle. They were patterned on the Model 1895 military rifles that Winchester tried to sell to New York State for its National Guard in 1896 and on the 10,000 military rifles that Winchester sold to the U.S. War Department in 1898 for possible service in the Spanish-American War.
Fig 2 ? Winchester Model 1895 Russian Musket Photo Courtesy of National Firearms Museum
World War 1 and the Russian Contract
With the advent of the First World War Winchester attempted to sell the Model 1895 to Great Britain. Winchester offered the rifles in musket form, chambered for the .303 Mk. VII cartridge, with a bayonet. Although Britain was in need of rifles, it preferred a bolt action rifle of its own design, resulting in Britain ordering Enfield Pattern 1914 rifles from Winchester and Remington.
The Czarist Russian Empire entered the war lacking enough rifles to equip its armies. It also lacked the industry to produce enough arms to equip its armies. An assessment by Russian planners revealed that not only was there a serious shortfall in arms to equip existing troops, but that they could not replace battlefield losses nor equip an expanding army in order to resist the combined attacks of Germany and Austria. For instance, during the Battle of Tannenberg in 1914, many of the Russian troops had no rifles. They were told to pick up the rifles of fallen comrades. By December 1914 there were 800,000 fully trained troops stuck in rear area camps who could not be sent to the front because there were no rifles to equip them. The situation was so bad that the Russian General Staff issued an emergency order to purchase any rifle overseas, regardless of caliber, as long as enough ammunition could also be supplied. These purchases included Japanese Arisaka Type 30 and Type 38 rifles carbines chambered in 6.5x50mm and even some 7mm Arisakas that were originally destined for Mexico but were undelivered because General Huerta's government was overthrown in 1914. But this still didn't help Russia as many European manufacturers were already producing modern rifles full bore for their own countries' armies and Russia needed millions of arms. Further, the various rifles purchased (many were obsolete) and different caliber ammunition created enormous logistics problems for Russia. For instance, one infantry regiment is documented as having rifles with 10 different calibers.
Russia then turned to the industrial might of the United States to manufacture large numbers of its standard Mosin-Nagant rifles. It placed large orders with two American manufacturers. The first order, signed on January 26, 1915, was with Remington Arms for one million Model 1891 Mosin-Nagant rifles with bayonets. Subsequent contracts with Remington and Westinghouse were for an additional 2,300,000 Mosin-Nagant rifles. However, it would take time for Remington and Westinghouse to build the factories, purchase, install and tool up equipment, and hire and train a workforce in order to start producing Mosin-Nagants and Russia needed the rifles as soon as possible.
Seeing a business opportunity Winchester offered the Model 1895 rifle in military musket form in the Russian 7.62x54mmR cartridge to the Russians for almost immediate production. Winchester claimed that it could modify the rifle to accept the Russian cartridge and start production in six weeks. The promise of fast delivery was a major factor in Russia's decision to purchase the Winchester Model 1895. The desperate Russian government accepted Winchester's offer and on November 13, 1914 placed an order for 100,000 Model 1895s, each with a bayonet and scabbard, a sling with quick detach swivels, and tools. A second order for an additional 200,000 rifles and accessories was placed on August 27, 1915. The average net price of the first 100,000 rifles was $23.40 per set and the net price of the second 200,000 rifles and accessories was $27.15 each. In addition, Russia placed an order with Winchester on May 17, 1915 for 300 million rounds of Russian 7.62x54mmR ammunition of which 174 million rounds were delivered.
Fig 3 ? Winchester Model 1895 US Army Military Musket. Winchester had manufactured 10,000 for the US Army for use in the Spanish-American War but they were delivered too late for
that conflict. The Army had trialed the rifle in the Philippines but never adopted it. Photo Tim Prince, College Hill Arsenal
Winchester was unable to meet its claim of being able to start producing the rifles in six weeks. In fact, production did not start for six months. This delay was due for a variety of reasons. The factory had to be set up because commercial Model 1895 receiver production had stopped and conversion from a small special order operation to large scale military production was more difficult than anticipated. The Russians required a number of modifications that proved difficult. Modifying the Model 1895 for the Russian 7.62x54mmR cartridge, designing and engineering the stripper clip charging guide loading bridge and guides, and Russian rear sight took longer than anticipated. In addition, the Russians failed to provide inspection gauges and refused to let Winchester use its own inspection gauges. Russian inspectors also perversely refused to allow Winchester to use its own ammunition for testing even though the ammunition was made under contract for Russia. Instead, ammunition had to be shipped from Russia by ship, further delaying production.
Once production started the Russian inspectors continued to prove difficult. For instance, they rejected many rifles for insignificant flaws such as the wood grain in the stocks not being straight enough. Winchester later sold these rejected rifles, which were fully functional, on the commercial market. One can surmise that the Russian inspectors were incompetent or were throwing up artificial difficulties in order to solicit bribes from Winchester. In any case, despite the delays, Winchester completed the first Russian Model 1895 contract on November 30, 1915, only two weeks late. The second contract was completed in December 1916.
Of the 300,000 Russian Model 1895 muskets that Winchester produced under the contracts, 293,818 muskets were delivered to Russia. The 6,182 difference between the 300,000 contracted for and those delivered can be attributed to losses in transit. The muskets were shipped via merchant ship and German U-boats and bad weather probably contributed to the losses. Serial numbers of the Model 1895 muskets from the first contract fall within 72,038 ? 174,234, while rifles from the second contract fall within the 174-234 ? 377,412 serial number range.
Russian Model 1895 Musket Description
The Winchester Model 1895 Russian Musket is similar to the earlier U.S. Military Model 1895 Musket that Winchester produced for the U.S. Army. However, the Russians required a number of modifications to suit their needs.
The rifle is a little over 46 ? inches long and weighs 8 pounds 11 ounces. The 28 inch long nickel-steel barrel has six groove rifling and a 1 in 12 inch twist rate. The rifle is a lever action with a single column fixed box vertical magazine that holds five 7.62x54mmR cartridges. Metal parts were blued.
It is chambered for the Russian 7.62x54mmR cartridge that used the Model 1908 Spitzer bullet. This bullet weighed 150 grains and had a muzzle velocity of 2,800 feet per second.
Fig. 4 ? Russian 7.62x54mmR Cartridge. Photo Public Domain.
Fig 5 ? Winchester Russian Model 1895 receiver (right side). Note "keeper eye" on the front of the magazine. Photo ? Bill Chronister
Fig 6 ? Winchester Russian Model 1895 receiver, action open. Photo ? Bill Chronister
The Russian Model 1895 has a three-piece walnut musket-style stock with an oiled finish. The pieces are the buttstock, forestock and handguard. It has a curved shotgunstyle buttplate with a sliding trapdoor that allowed access to a compartment in the buttstock that held a cleaning kit (pull-through and disassembly tool). There are two barrel bands, both of which have sling swivels. There is also a sling swivel in the bottom of the buttstock for a quick detach sling swivel, and a "keeper eye" on the front of the magazine to which a sling swivel can be attached. The front barrel band has a lug for a Winchester-made knife bayonet.
Fig 7 ? Buttstock with sliding trapdoor to compartment for cleaning kit and disassembly tool. Photo ? Bill Chronister
Fig 8 ? Detail of quick detach sling swivel on the buttstock. Photo ? Bill Chronister
Fig 9 ? Detail of front barrel band, front sight and bayonet lug. Photo ? Bill Chronister The rear sight is in the form of a base with steps and a folding leaf. It is calibrated for the Russian cartridge, using the same calibration as the Mosin-Nagant rifle. The sight is marked in Russian arshins, a Russian linear unit of measurement. One arshin equals 28 inches or .78 yards. The rear sight base is graduated in 400 to 1,400 arshins in increments of 200 arshins corresponding to the steps in the base. The leaf was graduation is 1,500 to an optimistic 3,200 arshins in increments of 100 arshins. The front sight is a ramp style with a sighting blade pinned to it.
Fig 10 ? Winchester Russian Model 1895 rear sight. Photo ? Tim Prince, College Hill Arsenal The Russian Model 1895 Musket is distinguished from other Winchester 1895 muskets by the specially designed two-piece loading bridge with guides for stripper clips or chargers. A major requirement of the Russian government was for the Model 1895 to be able to use the same stripper clips as the Mosin-Nagant rifle. This speeded loading (increasing the rate of fire) and was a point of commonality with the standard Russian army rifle. The stripper clips bridge/guide are attached with screws, one on each side of the frame.
Fig 11 ? Winchester Russian Model 1895 receiver, action open showing the 2-piece loading bridge with guides for stripper clips. Photo ? Bill Chronister
Fig 12 ? Winchester Russian Model 1895 receiver, action open 2-piece showing stripper clip with ammunition inserted into loading bridge. Photo ? Bill Chronister
Markings
The left side of the receiver has the Winchester markings:
MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW HAVEN CONN. U.S.A
PATENTED NOV.5.95.NOV.12.95.AUG.17.97.JAN.25.98.AUG.28.98.AUG.6.1907.
Fig 13 ? Winchester markings on left side of receiver. Photo ? Bill Chronister The top of the receiver is marked with the stylized WP in an oval over the caliber:
WP 7.62 M.M.
Fig 14 ? Markings on top of receiver. Photo ? Bill Chronister The upper tang is marked:
MODEL 1895 -WINCHESTERTRADE MARK REG US PAT OFF & FGN
Fig 15 ? Winchester Model 1895 markings on upper tang. Photo ? Bill Chronister The lower tang, which is underneath the lever when it is closed, has the serial number stamped laterally across it.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- cast bullet loads for military r castpics
- 30 40 krag speer
- winchester model 1895 russian musket vgca
- vintage military rifle cmp tt grrc
- c i p 30 40 krag cip bobp
- cartridge nosler
- serial number ranges for springfield armory manufactured military firearms
- u s m1903 springfield rifle caliber 30 06 nps history
- notes from the lab 30 40 krag load data
- springfield 1898 30 40 krag pdf
Related searches
- winchester model 12 replacement stocks
- winchester model 24 replacement stock
- musket gun for sale
- musket pistol for sale
- who invented the musket rifle
- when was the first musket invented
- springfield musket sling
- when was the musket created
- musket loading
- musket sling
- charleville musket sling
- winchester model 60 22 parts