Home - Boss Air



MINIMUM SPECIFICATIONS FOR 6.8KW BGSD POWERMAX GENERATOR

INDEPENDENT SHAFT DRIVE 6.8KW GENERATOR

Quantity of one (1) Boss model 6.8 B.G.S.D Powermax PTO shaft drive underdeck generator(s) to include the following as standard equipment.

Generator specifications; lifetime double sealed pre-lubricated bearings, drip proof construction, brushless design, maintenance-free, with one year warranty in material and workmanship from date of purchase.

Generator drive consists of the following:

1. A side-mount PTO and driveshaft that powers the generator without belts, pulleys or chains.

1. Generator bracket mounts to truck frame rail.

Generator frequency held within + 2% of 60 Hz and shall have voltage control of +2% from no load to full load by electronic engine.

Generator interface with truck’s electronic engine:

1. Programmed electronically to provide constant input speed to the generator during varying loads on the engine.

2. Generator overspeed protection to disengage PTO if RPM limits at the generator are exceeded.

1. Interface wiring of generator with electronic engine will override all other speed change requests on multiple speed systems when other auxiliary equipment are being used.

Instrumentation and receptacles to include:

1. One (1) voltmeter.

1. Two (2) 125 volt 15 amp duplex receptacles.

2. One (1) 125 volt 30 amp single twist lock receptacle. (Optional 240V 30A Twist-Lock)

3. All receptacles have weather tight covers and can be panel or remote mounted per the customer’s request.

Circuit panel box including two GFI breakers: one (1) 20 amp GFI and one (1) 30 amp GFI (Optional box that includes: One (1) 20 amp, One (1) 30 amp 240V and One (1) 30 amp).

Installation by factory and authorized distributor.

Generator mounting bracket attached to truck frame rail and aligned to maintain specified industry standards for driveline operating angles.

All material and procedures will follow applicable sections of the current National Electric Code.

Operation, parts, and maintenance manual.

MINIMUM SPECIFICATIONS FOR 8.1KW BGSD POWERMAX GENERATOR

INDEPENDENT SHAFT DRIVE 8.1KW GENERATOR

Quantity of one (1) Boss model 8.1KW B.G.S.D Powermax PTO shaft drive underdeck generator(s) to include the following:

Generator specifications; lifetime double sealed pre-lubricated bearings, drip proof construction, brushless design, maintenance-free, with one year warranty in material and workmanship from date of purchase.

Generator drive consists of the following:

2. A side-mount PTO and driveshaft that powers the generator without belts, pulleys or chains.

2. Generator bracket mounts to truck frame rail.

Generator frequency held within + 2% of 60 Hz and shall have voltage control of +2% from no load to full load by electronic engine.

Generator interface with truck’s electronic engine:

3. Programmed electronically to provide constant input speed to the generator during varying loads on the engine.

4. Generator overspeed protection to disengage PTO if RPM limits at the generator are exceeded.

2. Interface wiring of generator with electronic engine will override all other speed change requests on multiple speed systems when other auxiliary equipment are being used.

Instrumentation and receptacles to include:

2. One (1) voltmeter.

4. Three (3) 125 volt 15 amp duplex receptacles.

5. One (1) 125 volt 30 amp single twist lock receptacle. (Optional One (1) 240V 30 amp with only Two (2) 125V 15 amp receptacles)

6. All receptacles have weather tight covers and can be panel or remote mounted per the customer’s request.

Circuit panel box including two GFI breakers: one (1) 15 amp GFI, one (1) 20 amp GFI and (1) 30 amp GFI. (Optional box that includes: One (1) 20 amp, One (1) 30 amp and One (1) 30 amp 240V)

Installation by factory and authorized distributor.

Generator mounting bracket attached to truck frame rail and aligned to maintain specified industry standards for driveline operating angles.

All material and procedures will follow applicable sections of the current National Electric Code.

Operation, parts, and maintenance manual.

INDEPENDENT SHAFT DRIVE 10KW GENERATOR

Quantity of one (1) Boss model 10 B.G.S.D Powermax PTO shaft drive underdeck generator(s) to include the following:

Generator specifications; lifetime double sealed pre-lubricated bearings, drip proof construction, brushless design, maintenance-free, with one year warranty in material and workmanship from date of purchase.

Generator drive consists of the following:

3. A side-mount PTO and driveshaft that powers the generator without belts, pulleys or chains.

3. Generator bracket mounts to truck frame rail.

Generator frequency held within + 2% of 60 Hz and shall have voltage control of +2% from no load to full load by electronic engine.

Generator interface with truck’s electronic engine:

5. Programmed electronically to provide constant input speed to the generator during varying loads on the engine.

6. Generator overspeed protection to disengage PTO if RPM limits at the generator are exceeded.

3. Interface wiring of generator with electronic engine will override all other speed change requests on multiple speed systems when other auxiliary equipment are being used.

Instrumentation and receptacles to include:

3. One (1) voltmeter.

7. Four (4) 125 volt 15 amp duplex receptacles.

8. One (1) 125 volt 30 amp single twist-lock receptacle. (Optional One (1) 240V 30 amp with only Two (2) 125V 15 amp receptacles)

9. All receptacles have weather tight covers and can be panel or remote mounted per the customer’s request.

Circuit panel box including four GFI breakers: one (1) 20 amp GFI, two (2) 15 amp GFI and one (1) 30 amp GFI (Optional box that includes: One (1) 20 amp, One (1) 30 amp and One (1) 30 amp 240V).

Installation by factory and authorized distributor.

Generator mounting bracket attached to truck frame rail and aligned to maintain specified industry standards for driveline operating angles.

All material and procedures will follow applicable sections of the current National Electric Code.

Operation, parts, and maintenance manual.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download