Marine Quality Parts aPPlications in ... - Crate Marine Engines
Marine Engines Applications Guide
18 Month Unlimited Hour Warranty Why Buy an ATK Marine Engine?
? built for marine use ? No core CHARGE
Marine Engine Applications
ATK premium quality marine engines are designed and built specifically for boating. No matter how you use your boat, ATK Marine engines will provide maximum performance and long-term durability.
Part
Size
Years
Description
HP Rating Notes
General Motors
GM NEW 3.0 Marine Engine, Std rotation only, Complete with tinware, water circulation pump, distributor, coil, flywheel,
NGM30M 3.0 / 181 1991-2013 damper are installed. Will replace the 2.5 liter and early 3.0 (1967-90) engine with purchase of updated 12-3/4" flywheel 140 NEW GM and updated engine coupler. 1991-97 must use your original flywheel.
DM27 4.3 / 262 1985-86 GM 4.3 / 262 Std rotation, 2 pc rear seal, 12 bolt intake
205 Block casting number 177
DM28 4.3 / 262 1986-88 GM 4.3 / 262 Std rotation, 1 pc rear seal, flat tappet cam, 12 bolt intake, valve cover bolts down center.
205 Block casting numnbers: 553, 683
DM29
VM29
DMC7 VMC7 DMC4 DMW3 VMW3 DMW4
VMW4
DMK9 VMK9 DMX1 VMX1 DM07 DM07R DM95R DM95 DMB3 VMB3 DMB3R VMB3R
4.3 / 262
1987-92
GM 4.3 / 262 Std rotation, Roller cam engine. Heads have 3 bolt hole accessory mounting on the front of each head. Head casting numbers are 768, 103, 066, 996 and 476. With fuel pump hole. 12 bolt intake
205
Block casting numbers: 011, 867
GM 4.3 / 262 Complpete with oil pan, front cover, valve covers installed. Std rotation, Roller cam engine. Heads have 3
4.3 / 262 1987-92 bolt hole accessory mounting on the front of each head. Head casting numbers are 768, 103, 066, 996 and 476. With fuel 205 Block casting numbers: 011, 867 pump hole. 12 bolt intake
4.3 / 262
1992-97
GM 4.3 / 262 Standard rotation, roller cam, balance shaft casting 12550286 or 10224541, no fuel pump hole, 14 bolt oil pan, 10 bolt steel front cover, 12 bolt intake
205
Block casting numbers: 196, 534, 359, 535
4.3 / 262
1992-97
GM 4.3 / 262 Standard rotation, Complete with oil pan, front cover, valve covers installed, roller cam, balance shaft casting 12550286 or 10224541, no fuel pump hole, 14 bolt oil pan, 10 bolt steel front cover, 12 bolt intake
205
Block casting numbers: 196, 534, 359, 535
4.3 / 262
1992-97
GM 43. / 262 Std rotation, roller cam, no balance shaft, block casting 011, 867, head casting 064, 181, 209. Mech fuel pump, steel front cover.
205 Block casting numbers 011, 867
4.3
/
262
1996-2008
GM 4.3 /262 Std rotation, FI, 262 plastic timing cover. Head casting
Roller cam with balance shaft. should be 113. 8 bolt intake
Has
roller
rockers. Block
has
metric
mounts. 6
bolt
230 Block casting number 090M
4.3
/
262
1996-2008
GM 4.3 / 262 Std rotation, FI, Complete with oil pan, front Has roller rockers. Block has metric mounts. 6 bolt plastic
cover, valves timing cover.
covers installed. Roller cam with balance shaft. head casting should be 113. 8 bolt intake
230 Block casting number 090M
4.3
/
262
1996-2008
GM 4.3 / 262 Std rotation, Block casting 090M, rockers, balance shaft last 3 digits 542 or 748
metric
threads,
head
casting
113,
plastic
front
cover,
roller
cam, roller,
230 Block casting number 090M
GM 4.3 / 262 Std rotation, Complete w ith oil pan, front cover, valve covers installed. Block casting 090M w/ 7mm knock
4.3 / 262 1996-2008 sensor, metric threads, head casting 113, plastic front cover, roller cam, roller, rockers, balance shaft last 3 digits 542 or 748
230 Block casting number 090M
4.3 / 262
1996-99
GM 4.3 / 262 Std rotation, block casting 090, head casting 772 or 140, roller cam, 10 bolt oil pan, 8 bolt intake. Balance shaft casting 10224542
205 Block casting number 090
4.3 / 262
1996-99
GM 4.3 / 262 Std rotation, Complete with aluminum oil pan, front cover, valve covers installed, block casting 090, head casting 772 or 140, roller cam, 10 bolt oil pan, 8 bolt intake. Balance shaft casting 10224542
205 Block casting number 090
4.3 / 262
2007-11
GM 4.3 / 262 Std rotation, Block Cast #12600234/324, Balance Shaft, Head Cast # 12557113/12558114, M8 Bolts For Roller Rockers 2 Knock Sensor Both Sides
230 Block casting numbers: 234, 324
4.3 / 262
2007-11
GM 4.3 / 262 Complete with oil pan, front cover, valve covers installed. Std rotation, Block Cast #12600234/324, Balance Shaft, Head Cast # 12557113/12558114, M8 Bolts For Roller Rockers 2 Knock Sensor Both Sides
230 Block casting numbers: 234, 324
5.0 / 305 1976-85 GM 5.0 / 305 2pc rear seal, flat tappet cam, dipstick on starboard side of block.
230
Block casting numbers: 909, 979, 776, 777, 371, 778
5.0 / 305 1976-85 GM 5.0 / 305 Reverse rotation, 2pc rear seal, flat tappet cam, dipstick on starboard side of block.
230
Block casting numbers: 909, 979, 776, 777, 371, 778
5.0 / 305
1985-87
GM 5.0 / 305 Reverse rotation, 1 pc rear seal, valve covers bolt on perimeter, head casting 416, 301, 601, flat tappet cam. Use DM95 for Std rotation
5.0 / 305
1985-87
GM 5.0 / 305 Std rotation, 1 pc rear seal, valve covers bolt on perimeter, head casting 416, 301, 601, flat tappet cam. Use DM95R for Reverse rotation
230 Block casting number 551 230 Block casting number 551
5.0 / 305 1987-95 GM 5.0 / 305 Non Roller, 1 pc rear main, Carbureted, steel front cover.
230
Block casting numbers: 535, 551, 627, 058
5.0 / 305
1987-95
GM 5.0 / 305 Complete with oil pan, front cover and valve covers installed, Non Roller, 1 pc rear main, Carbureted, steel front cover.
230
Block casting numbers: 535, 551, 627, 058
5.0 / 305 1987-95 GM 5.0/305 Reverse rotation, Non Roller, 1 pc rear main, Carbureted, steel front cover.
230
Block casting number: 535, 551, 627, 058
5.0 / 305
1987-95
GM 5.0 / 305 Reverse rotation, Complete with oil pan, front cover and valve covers installed, Non Roller, 1 pc rear main, Carbureted, steel front cover.
230
Block casting numbers: 535, 551, 627, 058
DMM2 5.0 / 305 1996-2006 GM 5.0 / 305 Vortec, SAE threads, Roller Cam, Plastic Front Cover (not included). 8 bolt intake
230 Block casting numbers: 880, 878
VMM2 VMM2S DM02 DM03 DM20 DM21 DM96 DM96R
5.0
/
305
1996-2006
GM 5.0 / 305 Vortec, Complete with Cover w/sensor hole. 8 bolt intake
oil
pan,
front
cover
and
valve
covers
installed,
SAE
threads,
Roller
Cam,
Plastic
Front
5.0
/
305
1996-2006
GM 5.0 / 305 Vortec, Complete with oil Cover w/o sensor hole. 8 bolt intake
pan,
front
cover
and
valve
covers
installed,
SAE
threads,
Roller
Cam,
Plastic
Front
5.7 / 350
1964-80
GM 5.7 / 350 2 pc rear seal, 9.0:1 CR, port side dipstick. Use DM03 for Reverse rotation.
5.7 / 350
1964-80
GM 5.7 / 350 Reverse rotation, 2 pc rear seal, 9.0:1 CR, 2 bolt main, port side dipstick. Use DM02 for STD rotation
5.7 / 350
1980-85
GM 5.7 / 350 STD rotation, 2 bolt main, 2 pc rear seal, starboard side dipstick. Valve cover bolts on perimeter. Use DM21 for reverse rotaion
5.7 / 350
1980-85
GM 5.7 / 350 Reverse rotation, 2 bolt main, 2 pc rear seal, starboard side dipstick. Valve cover bolts on perimeter. Use DM20 for standard rotaion
5.7 / 350
1986-87
GM 5.7 / 350 Standard rotation, 2 bolt main, 1 pc rear seal, valve cover bolts on perimeter. Use DM96R for reverse rotation.
5.7 / 350
1986-87
GM 5.7 / 350 Reverse rotation, 2 bolt main, 1 pc rear seal, valve cover bolts on perimeter. Use DM96 for standard rotation.
230 Block casting numbers: 880, 878
230 Block casting numbers: 880, 878
270
270
260
Block casting numbers: 909, 979, 776, 777, 371, 778, 535, 551, 627, 058
260
Block casting numbers: 909, 979, 776, 777, 371, 778, 535, 551, 627, 058
260
Block casting number: 245, 379, 010, 014, 678, 388, 618
260
Block casting number: 245, 379, 010, 014, 678, 388, 618
Call ATK for additional application assistance
800-421-3746
(See Full Warranty for Details)
Part DMM6 VMM6 DMM6R VMM6R VMH4 VMH4S
Size
Years
Description
HP Rating Notes
5.7 / 350 1987-95 GM 5.7 / 350 2 bolt main, 1 pc rear seal, flat tappet cam, valve covers bolt thru center, steel front cover. 12 bolt intake.
260
Block casting numbers: 548, 526, 148, 638
5.7 / 350
1987-95
GM 5.7 / 350 Complete with oil pan, front cover and valve covers installed. 2 bolt main, 1 pc rear seal, flat tappet cam, valve covers bolt thru center, steel front cover. 12 bolt intake.
260
Block casting numbers: 548, 526, 148, 638
5.7 / 350
1987-95
GM 5.7 / 350 Reverse rotation, 2 bolt main, 1 pc rear seal, flat tappet cam, valve covers bolt thru center, steel front cover. 12 bolt intake.
260
Block casting numbers: 548, 526, 148, 638
5.7 / 350
1987-95
GM 5.7 / 350 Reverse rotation, Complete with oil pan, front cover and valve covers installed. 2 bolt main, 1 pc rear seal, flat tappet cam, valve covers bolt thru center, steel front cover. 12 bolt intake.
260
Block casting numbers: 548, 526, 148, 638
5.7
/
350
1996-2005
GM 5.7 / 350 Complete with oil pan, front cover and valve covers bolt thru center, plastic front cover w/ crank sensor
covers hole. 8
installed, 1 pc rear seal, Roller bolt intake. Electric fuel pump
cam,
2
Bolt
Main,
valve
260 Block casting number 880
5.7
/
350
1996-2005
GM 5.7 / 350 Complete with oil pan, front cover and valve covers installed. 2 bolt main, 1 pc rear covers bolt thru center, plastic front cover w/o crank sensor hole. 8 bolt intake. Electric fuel pump
seal,
Roller
cam,
valve
260 Block casting number 880
DMH4 5.7 / 350 1996-2005 GM 5.7 / 350 2 bolt main, 1 pc rear seal, Roller cam, 8 bolt intake, electric fuel pump.
260 Block casting number 880
HP90 6.2 / 383 1987-95 GM 6.2 / 383 Std rotation only, Vortec "stroker" engine, roller cam, Dart Vortec heads, tinware installed
345
HP96 DM32 DM25 HP50 DME1 DMC5 DMK2 DMK1 DMW2 HP95 Ford DM34 DM35 DMA4
6.2 / 383 1996-2005 GM 6.2 / 383 High Performance Mariine Engine, Std rotation only. New Pro_Filer heads, scat crank & rods.
7.4 / 454
1973-90
GM 7.4 / 454 Reverse rotation rotation, Mark IV, 2 pc rear seal, flat tappet, 10 bolt front cover, round intake port. 2 bolt main. Use DM25 for Std rotation
7.4 / 454
1973-90
GM 7.4 / 454 Std rotation, Mark IV, 2 pc rear seal, flat tappet, 10 bolt front cover, round intake port. 2 bolt main. Use DM32 for Reverse rotation
7.4 / 454 1974-90 GM 7.4 / 454 Std rotation, HP Engine, OE head 781, HP cam lift. 489 int /.520 ex, Duration 224.
7.4 / 454
1991-97
GM 7.4 / 454 Reverse rotation, Gen V, 4 bolt main, 1 pc rear seal, oval intake port, flat tappet, steel timing cover. Use DMC5 for Std rotation
7.4 / 454
1991-97
GM 7.4 / 454 Std rotation, Gen V, 4 bolt main, 1 pc rear seal, oval intake port, flat tappet, steel timing cover. Use DME1 for Reverse rotation
7.4 / 454
1996-03
GM 7.4 / 454 Std rotation, Gen VI, 4 bolt main, electric fuel pump, head casting 279, oval intake port, 6 bolt aluminum front cover.
7.4
/ 454
1996-2003
GM 7.4 / 454 front cover.
Std rotation, Gen VI, 4 bolt main, electric fuel pump, head casting 156, oval intake port, 6 bolt aluminum
8.1 / 496
GM 8.1 / 496 Special order
8.2
/
502
1990-2008
GM 8.2 / 502 crank & rods,
Std rotation only. Actual displacement is 509CI. New Dart Big M block, Aluminum tinware installed. Direct replacement for the Mercruiser Mag 502.
Pro-Filer
heads,
Scat
360
330
Block casting numbers: 959, 445, 286, 775, 289
330
Block casting numbers: 959, 445, 286, 775, 289
415 Block casting 445
330 Block casting numbers: 182, 313
330 Block casting numbers: 182, 313
330 Block casting number 297
330 Block casting number 297
450+ New dart "M" block
5.0 / 302
1968-81
Ford 5.0 / 302 Std rotation, Crank casting 2M, 2MA, 2MAB only, flat tappet, windsor firing order 13726548. Use DM35 for Reverse rotation
5.0 / 302
1968-81
Ford 5.0 / 302 Reverse rotation, Crank casting 2M, 2MA, 2MAB only, flat tappet, windsor firing order 13726548. Use DM34 for Std rotation
5.0 / 302 1981-95 Ford 5.0 / 302 Std rotation, Crank casting must be 2MAE, flat tappet, 14mm spark plugs, Windsor firing order 13726548
200
Block casting D4DE-AA, D8YE-a#A, D9DE-E3A, D5ZY-AA
200
Block casting D4DE-AA, D8YE-a#A, D9DE-E3A, D5ZY-AA
200 Block casting E1AE-AA, E5AE, E0AE, E6SE
DM33 5.8 / 351 1968-87 Ford 5.8 / 351 Reverse rotation, flat tappet cam. Use DM06 for Std rotation
250 Block casting C9OE,D2AE,D4AE,D9TE,E3AE
DM06 5.8 / 351 1968-87 Ford 5.8 / 351 Std rotation, flat tappet cam. Use DM33 for Reverse rotation
250 Block casting C9OE,D2AE,D4AE,D9TE,E3AE
DMA1 5.8 / 351 1988-94 Ford 5.8 / 351 Std rotation, dipstick in block, flat tappet cam. Use DMA1R for Reverse rotation
250 Block casting E4AE, E9AE, F0AE
DMA1R 5.8 / 351 1988-94 Ford 5.8 / 351 Reverse rotation, dipstick in block, flat tappet cam. Use DMA1 for Std rotation
250 Block casting E4AE, E9AE, F0AE
DMA1GTP 5.8 / 351 1988-94 Ford 5.8 / 351 Std rotation, dipstick in block, flat tappet cam. 9.0:1 comp, GT40 performance heads Requires 92 octane. 285 Block casting E4AE, E9AE, F0AE
DM85 7.5 / 460 1978-90 Ford 7.4 / 460 Std rotation, Crank 3YA, 3YAB, flat tappet cam
340 Block casting D9TE
DM26 7.5 / 460 1973-78 Ford 7.5 / 460 Std rotation, Crank 2YA, 2YAB, 2YABC, 2Y, C8VE-A, flat tappet cam. Chrysler Marine DM15 5.2 / 318 1966-88 Chrysler Marine 5.2 / 318, Std rotation, dipstick in front of block. Use DM24 for Reverse rotation DM24 5.2 / 318 1966-88 Chrysler Marine 5.2 / 318, Reverse rotation, dipstick in front of block. Use DM15 for Std rotation DM17 5.9 / 360 1975-88 Chrysler Marine 5.9 / 360 Std rotation, dipstick in front of block. Use DM30 for Reverse rotation DM30 5.9 / 360 1975-88 Chrysler Marine 5.9 / 360 Reverse rotation, dipstick in front of block. Use DM17 for Std rotation
340 Block casting D1TE, D1V, D1VE-AA, D1VE-A2
200
Block casting numbers: 730, 230, 603, 803, 030
200
Block casting casting numbers: 730, 230, 603, 803, 030
250
Block casting casting numbers: 496, 230, 830
250
Block casting casting numbers: 496, 230, 830
1102 W.N. Carrier Pkwy., Ste. 100, Grand Prairie, TX 75050
18 Month Unlimited Hour Warranty Nationwide Parts & Labor
? Marine Quality Parts ? Expanded nationwide inventory ? NO FAULT WARRANTY PROGRAMS AVAILABLE ? R EMANUFACTURED-NEW-HIGH PERFORMANCE
APPLICATIONS IN STOCK!
? N o core CHARGE
Engine Rotation
Engine rotation is determined by observing flywheel rotation from the rear (stern end) of the engine looking forward (toward water pump end). Propeller rotation is not necessarily the same as engine rotation. When ordering replacement engine, short blocks or parts for engine, be certain to check engine rotation. Do not rely on propeller rotation in determining engine rotation.
Stern Drive (Inboard/Outboard, Outdrive) The engine is mounted inside the boat. The transmission/drive unit is outside, attached to the transom. The engine and drive unit are joined by a torque coupler and universal joint.
Inboard The engine and transmission/drive unit are inside the boat. A drive shaft is connected at the rear of the transmission and is run out of the hull through a sealing unit. The propeller is connected directly to the drive shaft at the in-water end.
V-Drive Basically a modified inboard installation. The engine is mounted with the front (pulley end) facing stern (rear). The transmission faces the bow (front) and by the use of a universal joint on the end of the transmission, the drive shaft is directed stern-wards under the engine and through the hull.
Jet Drive The engine is mounted inside the boat and attached to a high speed pump which draws in water through an intake grate, increases its velocity and forces it out through a directionally-adjustable nozzle which is mounted outside the boat.
72001 Flywheel & Housing
a. Standard Left Rotation ? All MCM Stern Drive Engines, MIE Inboard, Left Hand Rotation Engines.
b. Opposite Right Hand Rotation ? MIE Inboard Right Hand Rotation Engines.
For additional application assistance
Call 800-421-3746 (REV. 3/2015)
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- high quality remanufactured engines excellent warranty exact
- mercury mercruiser internal engine bravo sterndrive and
- recommended crate engine start up procedure
- 350 ho engine 19210007 specifications chevrolet
- gm service replacement powertrain gm performance parts
- circle track crate engine technical manual
- crate engines ford power shop
- vortec 5 0l v 8 marine gm powertrain torino
- chevrolet 350 engine manual
- marine quality parts applications in crate marine engines
Related searches
- 454 marine engines complete motor
- complete marine engines for sale
- rebuilt marine engines complete
- rebuilt marine engines for sale
- reman marine engines for sale
- 5 7 marine engines for sale
- are marine engines different
- 454 marine engines for sale
- 5 newer applications in ict
- marine diesel parts supply
- microsoft visual basic for applications in excel
- psychology applications in everyday life