Great Planes Trading Company Presents



Great Planes Trading Company Presents

FALL ANTIQUE WRENCH AUCTION

NOV. 8, 2013, 4 PM

Harvester Lions Club

4835 Central School Rd.

St. Charles (St. Louis), MO 63304

(Preview Friday 12-4 PM)

(The majority of the wrenches in this auction come from the collections of the late Walter Bizzell of Sikeson, Missouri; and the late Carl Pohle of Rolla, Missouri.)

CHOICE BOX LOTS:

CB001:

A: B & G PLOW CO. CANTON. O. 10-inch in red paint moderate to heavy pitting.

B: COLLINS PLOW CO. 124 8-inch with hammer.

C: P. P. CO. (Patee Plow Co.) 8-inch in red paint, moderate to heavy pitting.

D: CHATTANOOGA CP4003 with IHC logo on back, 8.75-inch with hammer, VG.

E: COLLINS PLOW CO. 124 with IHC logo, hammer, pitted.

F: COLLINS PLOW CO. with hammer, heavy pitting.

G: Scarce DEERE 196A cutout 8-inch in green paint, looks like heavy pitting under paint.

CB002:

A: B F. AVERY & SONS CO. C63 LOUISVILLE KY USA 10-inch with 1-inch with hex socket, VG.

B: OLIVER CO. 9 1/2-inch F239, good overall.

C: PATEE TOOL CO. 7 1/2-inch CHICAGO HARDWARE No 95, VG.

D: Same as above with IHC logo and 95 on one side, fine.

E: P66 PATEE PLOW MONMOUTH ILL 6 1/4-inch, VG.

F: P.P. CO. 100 (PATEE PLOW CO.) 8-inch, VG.

G: IHC 490B 8-inch with hammer, light pitting, VG.

H: IHC MOWER G261 has IHC logo on both sides, 7 1/2-inch, VG.

I: P.O. TOOL CO. CANTON ILL 295 1, 9 1/4-inch in red paint with some pitting.

CB003:

A: IHC 1059B 8 1/2-inch complete and fine.

B: MOLINE DRILL A1037 with logo, green paint 8 3/4-inch, VG.

C: IRON AGE C9 cut-out 6 1/2-inch, VG.

D: PLANET JR. 3 cutout 6 1/2-inch, VG.

E: PLANET JR. U.S.A. 3, 6 1/2-inch in red paint, VG.

F: EMPIRE PLOW CO. CLEVELAND #10, 6 1/2-inch in red paint, VG.

G: Unknown make cultivator wrench marked 1AA in green paint, VG.

H: PLANET JR. 3 cutout 6 1/2-inch, in orange paint, VG.

I: PLANET JR. 2 cutout 6 1/2-inch, VG.

CB004:

A: EMERSON 10 1/4-inch in red paint with pitting.

B: FAMOUS-OHIO J276, 9 1/2-inch, on jaw cracked on one end, good overall.

C: BROWN-MANLEY PLOW CO. 44 (MALTA OHIO), 8 1/2-inch, VG.

D: BROWN-MANLEY PLOW CO. 841 (MALTA OHIO) 8 1/2-inch, VG.

E: HAYES WHEEL CO. JACKSON MICH. W202 with A inside circle hub cap wrench 13 3/4-inches overall, VG.

F: B&G PLOW CO. CANTON O. 9 3/4-inch implement wrench in red paint, pitted.

G: NEW IMPERIAL OHIO CHILLED 10-inch, very good overall.

CB005:

A: KEYSTONE U855 10.5-inches long in green paint.

B: (OLIVER CHILLED PLOW) CP245 9.25-inches long overall in red paint, VG.

C: (CASE EAGLE) 141 10-inch wrench, VG.

D: (GALE MFG. CO. J43) 8.25-inches with hammer.

E: J.I. CASE PLOW WORKS 4106 P 8-inch wrench, VG.

F: DEERING 7.5-inches with one broken jaw.

G: BLACKHAWK cut-out with hammer 7.5-inches.

CB006:

A: MALSBARY 6180 DUC2 13.5-inches, VG.

B: P&O CANTON ILL 4129 painted red 10.5-inches, some pitting.

C: ROCK ISLAND RI123 7.75-inch, VG.

D: BLACKHAWK cut-out with poll and hammer, 7.5-inch, VG.

E: (AMERICAN SEEDING MACHINE CO. SPRINGFIELD OHIO) B.573 8.5-inch in green paint.

F: BLACKHAWK cut-out painted black and pitted, looks like some JB WELD 7.75-inch.

G: (J.I. CASE PLOW CO.) 2815C buggy wrench 7.25-inch, VG.

H: ROCK ISLAND RI124 5.5-inch, VG.

CB007:

A: DL CO MIL WIS PAT PEND hourglass logo, 10-inch multiple sizes.

B: BAHCO 31 8" VOLVO V-STEEL AB BAHCO SWEDEN 291, Crescent-type with alligator, fine.

C: Three wrenches: heavily pitted E3888 painted black 7-inch; double open end 6-inch with square socket, very good; MECO 7 one square opening and four hex.

D: Three MECO No. 2, two in green paint.

CB008:

Choice from among 20 assorted implement clevises.

A: Implement clevis with a twist clevis the black pin is just a wooden dowel put there by previous owner for looks. Has a 3-digit number we cannot make out due to the red paint.

B: Implement clevis with 8 holes in red paint, 3-digit number, black pin is just a wooden dowel.

C: Implement clevis with seven holes, intact wrench pin, very good overall.

D: Implement clevis 2832C with wooden dowel for a pin, VG.

E: Implement clevis CPCL67 with wooden dowel for a pin, VG.

F: Green clevis with 7 holes, wooden dowel for a pin, VG.

G: Red clevis with original? pin, in red paint, some pitting.

H: Clevis 2832C with original pin, VG.

I: Clevis CY424 with double row of holes, in red paint and having original pin, VG.

J: Small clevis in red paint with wrench pin, VG.

K: Green clevis with another clevis mounted in one of the holes. The pin is wooden.

L: Unknown implement part (looks like part of a clevis) has number 226 cast into one side, 6 holes, very good, in red paint.

M: Clevis #2832A in red paint, pin is threaded but the clevis is not.

N: Clevis with wrench pin clevis marked 2835, wrench pine marked 300, fine overall.

O: Large clevis in yellow paint, has 10 holes, the pin is just a wooden dowel, VG.

P: Clevis plates 12 L & 12R held together with two bolts, in green paint.

Q: Clevis 28320? with wooden dowel for a pin, in red paint, VG.

R: Unusual clevis with sliding clamp, in red paint, VG.

S: Clevis with single tree clip, very good overall, no pin.

T: Unusual twist clevis with screw pin, in red paint, very good overall.

CB009: Choice from among 11 mostly-IHC wrenches:

A: Unknown 14.5-inch with 5/8-inch offset open end.

B: IHC P1189 14-inch double ended socket, some pitting, good (R255)

C: IHC P1189 14-inch double ended socket, very good (R255)

D: 97P 12-inch with 90 degree open end at one.

E: JWB 12-inch with scocket at one end, and open end at other. (R266 L)

F: IHC U50 8.5-inch, some pitting. (R255)

G: IHC U50 8.5-inch, slightly bent and number partially obliterated from banging. (R255)

H: IHC ZA810 pitman wrench, some mild plitting, good.

I: IHC ZA810 pitman wrench, complete and VG.

J: IHC 329 9-inch, some mild pitting, good.

K: P890 7.25-inch, slight twist in handle, VG.

CB010: Choice from among 10 mostly-IHC wrenches:

A: IHC 1326-E some pitting, good.

B: G3525 with IHC and IHCO logos, some pitting, good.

C: IHC 1326E with IHC logo and sizes of openings cast into each end, VG.

D: 326A6 open end with spanner, the spanner can be used on early HD flathead push rod tubes.

E: G3172 with IHC logo, good.

F: 1325-EA, complete and VG.

G: 1325-EA, mild pitting, good.

H: G-3173 with IHCO and IHC circular logo, VG.

I: G3166 with circular IHC logo, fine.

J: Unknown 3.5-inch, some mild pitting, good.

CB11: Choice from among eight assorted wrenches:

A: Unmarked 12-inch socket for 1 1/2-inch hex nuts and bolts, VG.

B: Unmarked 15-inch T-shaped farm wrench, VG.

C: Fomoco (FORD MOTOR CO.?) 13.5-inch socket fits 1 1/2-inch nuts and bolts, VG.

D: Interesting 16.5-inch farm or implement wrench with multiple openings, VG.

E: Wagon nut wrench with 10.25-inch handle, VG.

F: Unmarked 9.25-inch stamped or pressed steel hub cap wrench, VG.

G: FORDSON 11-inch lug wrench?, VG.

H: Unusual 8-inch ZENEL wrench with 3/16 & 1/4-inch open ends, VG.

CB012: Choice from among eight misc. wrenches:

A: INDIANA SILO CO. 11-inch, VG.

B: W.L. ROSEL CO. COL. O. (Columbus, Ohio) 5 IN 1 TOOL PAT. PEN'D, 7.5-inch, VG.

C: 9-inch buggy or vehicle wrench with faint four or five-digit number cast in oval depression between open ends, some pitting, good.

D: 9-inch buggy or vehicle wrench with faint number below the the two open ends on the sides, VG.

E: Unknown make 7-inch with large letter S cast into one side, VG.

F: DELCO 8-inch 90257 SPARK PLUG-GEN NUT, CYLINDER STUD-BATTERY NUT, in red paint, VG.

G: WESTERN 6-inch steel wrench the cursive letter looks like the WINCHESTER logo on Winchester items, VG.

H: OXWALL No. 1 open ended 5.5-inch, VG.

CB013: Choice from among six assorted wrenches:

A: THE BUCK'S STOVE & RANGE CO. 15-inch stove lid lifter, VG.

B: M. KLEIN & SONS CAT 3416 13-inch lineman's wrench, VG.

C: Unknown 9-inch scissor or plier-like tool with spring loaded handles, came in an IHC box lot.

D: Unknown 11.5-inch stamped or pressed with 2 7/8-inch open end and for hex nut; and 1-inch offset opening.

E: HERBRAND No. 194 9.25-inch, multiple openings, VG.

F: QUICKSET 9-inch quick adjusting auto-type nut wrench, the spring for the release lever is out of order, light pitting on handle, good overall.

CB014: Choice from among 4 cast iron tractor seats:

A: HOOSIER complete and VG.

B: DEERE & CO. MOLINE ILL in newer green paint, VG.

C: MILWAUKEE in green paint with bolt and bracket, complete and VG.

D: HOOSIER with bolt and bracket, complete and VG.

CB015: Choice from among 15 tractor or implement tool boxes.

A: IHC (International Harvester Company) sheet-metal tractor tool box with wooden bottom, needs a new wooden knob to open the hinged lid, and a good coat of paint, good overall.

B: COLLINS cast iron implement or tractor tool box with cut-out lettering, nice coat of red paint, very good overall.

C: COLLINS cast iron implement or tractor tool box with cut-out lettering, faint 23 cast into bottom side, nice coat of red paint, good overall.

D: PATTEE 277 cast iron implement tool box, moderate to heavy pitting shows under newer red paint job, good overall.

E: Unknown make cast-iron tractor or implement tool box, intact bracket, but bolt and nut are missing, in green paint, VG.

F: FORDSON tractor tool box in gray paint, hinged lid, heavy pitting and few holes where it's rotted thru.

G: JOHN DEERE sheet-metal tractor tool box, complete and very good, nice green paint.

H: B.F. AVERY 191 cast iron tractor or implement tool box, complete and VG.

I: Cast iron tractor tool box, bracket marked L329, in red paint, VG.

J: Fine IHC 156B cast iron tool box with IHC logo and model number cast into front, has corn cobs cast into each side, fine overall condition.

K: IHC (International Harvester Company sheet-metal tool box with wooden bottom and having a round holder for the oil can on the end, the wooden bottom is cracked, needs a new wooden pull knob on the lid, good overall.

L: Unknown make RP256 cast iron tool box for tractor or implement, in red paint, the small mounting bracket on bottom looks like a replacement, VG.

M: Cast iron tractor or implement tool box, has number H123 cast into bottom, in green paint, fine overall.

N: Unknown make cast-iron tool box for tractor or implement, in red paint, VG.

O: PATTEE (Plow Company) 276 cast iron tractor or implement tool box, complete and VG.

CB016: Choice from among 11 Non-sparking tools including 9 by AMPCO.

A: AMPCO W-764C, 1 7/16 & 1 5/8, VG.

B: AMPCO W748, 1 1/4 & 1 1/16, VG.

C: AMPCO W741F, 1-inch and 1 1/8-in. has USA scratched into handle, VG.

D: AMPCO W726, 7/8 & 13/16-inch, VG.

E: AMPCO W738, 1 1/6 & 7/8-inch, VG.

F: AMPCO W706, 9/16 & 3/4-inch, VG.

G: AMPCO W704, 5/8 & 9/16-inch, VG.

H: AMPCO W702, 1 1/16 & 1/2-inch, has some oxidation on one side, will clean to VG.

I: AMPCO W704, 5/8 & 9/16-inch, VG.

J: Unknown make, 9/16 & 1/2-inch, VG.

K: Unknown make, 7/16 & 3/8-inch, VG.

CB017: Choice from among 8 screw adjusted monkey wrenches including railroad models:

A: PEXTO 15-inch with steel handle, light rust, will clean to fine.

B: TRIMO 15-inch, light rust, will clean to VG.

C: W&B 13-inch CRI&PRY (CHICAGO ROCK ISLAND &PACIFIC RY) with light rust, will clean to fine.

D: BILLINGS BEMIS & CALL 12-IN. NO. 90, fine overall.

E: PS&W 15-inch SAMSON, VG.

F: RAILROAD SPECIAL 12-inch CB&Q (Chicago, Burlington and Quincy Railroad) with light to moderate rust, will clean to very good overall condition.

G: BEMIS & CALL 12-inch all-steel Coes-type monkey wrench.

H: BILLINGS 10-inch COES wrench, complete and fine.

CB018: Choice from among 13 Non-sparking wrenches:

A: Unknown make 8-inch screw adjusting pipe wrench, similar to a RIDGID, VG.

B: BERYLCO P-510 10-inch slip joint pliers, fine. Retails today for $136.05.

C: AMPCO P-35 pliers with side cutter and wire cutter, fine. Retails today for $163.00.

D: AMPCO W 3120C, 7/16 & 1/2-inch, fine. Retails today for $43.70.

E: AMPCO W-3120-C, 1/2 & 7/16-inch, fine.

F: BERYLCO W990, 7/16 & 1/2-inch, fine.

G: AMPCO? W3180, 3/4 & 7/8-inch, fine. Retails new today for $75.20.

H: AMPCO W-3180-C, 7/8 & 3/4-inch, fine.

I: BERYLCO W-63, complete and fine.

J: BERYLCO W65, 11/16-inch, fine.

K: BERYLCO W-66, 3/4-inch, fine.

L: BERYLCO W-67, 7/8-inch, fine.

M: ARMSTRONG ARMALOY 1-inch, fine.

CB019: Choice from among four wooden handled combination pipe and nut wrenches:

A: BEMIS & CALL 12-inch with long adjuster sleeve, light rust, will clean to VG.

B: BEMIS & CALL 12-inch with short knurled adjuster with hex nut on bottom, needs cleaning, VG.

C: Unknown 12-inch with hex adjuster.

D: BEMIS & CALL 12-inch with short knurled adjuster with hex nut on bottom, light rust, will clean to VG.

CB020: Choice from among 19 assorted non-sparking tools:

A: BERYLCO P32 pick axe head, fine. Grainger sells the Ampco model new today for $238.

B: AMPCO W58S drum bung wrench, retails new today for $90.15.

C: Unmarked 12-inch drum bung wrench, VG.

D: AMPCO S-50 screwdriver, complete and fine. Retails today for $48.90.

E: BERYLCO H61 claw hammer, complete and fine. Comparable ones sell for $78.35 today.

F: AMPCO H4 2-lb. ball pein hammer, VG. The retail new today for $92.65.

G: BERYLCO H60 claw hammer, chip from end of wooden handle, otherwise VG.

H: BERYLCO C21A chisel; BERYLCO D309 punch; and P99 punch.

I: AMPCO S23 unhandled scraper, fine. Retails today for $90.25.

J: Heavy brass scraper? with socket for attaching wooden handle, VG.

K: AMPCO W8 flange wedge 8 x 1 1/2-inch, fine. Retails new for $45.95.

L: AMPCO W41, 1 1/4-inch non-sparking hex box, owner marked TEXACO, VG.

M: 806, 1 1/8-inch box wrench, VG.

N: AMPCO P-35 plier, complete and fine, retails new for $163.

O: Unknown make 5/8 & 11/16-inch open ended wrench, fine.

P: AMPCO W-3150-C box wrench, fine. Retails new for $54.80.

Q: BERYLCO L-17 7/8-inch allen wrench, complete and fine.

R: BERYLCO L-12, 1/2-inch allen wrench, fine.

S: BERYLCO ?-54 offset flat bladed screwdriver, fine.

CB021: Choice from among five assorted wrenches:

A: Unknown make ratcheting cylinder tooth wrench, complete and fine.

B: Unknown 14-inch with banged up letter and slightly offset opening on big end.

C: FORD 13.5-inch 5Z 210 with offset open end, VG.

D: FORDSON KEYSTONE MFG. CO. 10-inch No. 80 S-handle, chipped at top of fixed jaw, good.

E: FORDSON 2137? 2.25-inch hex box, VG.

CB022: Choice from among four assorted automotive wrenches including speed wrenches:

A: WALDEN WORCESTER 1/2 6016 socket wrench, fine overall.

B: HINS-DALE S2 9/16 socket, VG.

C: BLACKHAWK 4002 brace-type valve tool, VG.

D: HOL-SET MFG. ROCHESTER NY PAT'S APPL'D FOR brace-type valve tool, VG.

CB023: Choice from among 7 Eifel Plierench sets most with original pouches:

A: Unusual 7-inch pair with three jaws including a round one, all inside an original cloth pouch, VG.

B: Three pair of 9-inch pliers with four spare jaws and one canvas pouch, all VG.

C: Newer VACO PLIERENCH with three spare jaws, VG.

D: Nice 9-inch pair in imitation leather pouch with gold lettering on outside of pounch, comes with two spare jaws and a little screwdriver. E: Eifel PLIERENCH set in original canvas pouch with three spare jaws including the tubing cutter, and spring steel clip, very good overall.

F: Eifel PLIERENCH set in original canvas pouch with four spare jaws including the tubing cutter, and spring steel clip, very good overall.

G: Newer 9-inch MASTERFORM TOOL CO. PLIERWRENCH MODEL 6 1/2, with three spare jaws, some mild surface rust, VG.

CB024: Choice from among five leather working tools.

A: Plier like tool for installing snap snap closures?

B: USMC (United Shoe Machinery) tool for installing shoe buttons?

C: Lasting type plier with wide gripping faces, VG.

D: Unusual and unmarked lasting-type tool with hammer face and instead of pier has a nipper or cutter.

E: Leatherworking vise that attaches to the edge of a table or bench, VG.

CB025: Choice from among six PLIERENCH pliers including a group of three pair with modified jaws:

A: 7-inch EIFEL PLIERENCH with four spar jaws, VG.

B: 9-inch PLIERENCH marked SHAKEPROOF INC on back, has special modified jaws, VG.

C: Lot of three HEYCO PLIERENCH tools all with special purpose jaws; pair with rubber handle covers marked NO. 29, all VG.

D: Late model PLIERENCH by MASTERFORM TOOL CO, VG.

E: Modified PLIERENCH by PLIERENCH TOOLS, INC. that has been made to crimp something, very good; and a later model 8 1/2-inch PLIERENCH with sticker on side marked PLIERENCH CHICAGO 40, ILL 1052 on back, VG.

F: Later EIFEL GEARED PLIERENCH 9-inch by the American PLIERENCH CORP'N CHICAGO, with 5 spare jaws and spring clip, inside a plastic pouch, VG.

G: Later VACO 9-inch EIFEL PLIERENCH with two spare jaws inside a plastic pouch, fine.

CB026: Choice from among six lasting pliers:

A: Lasting plier with hammer.

B: Lasting plier with hammer.

C: Lasting plier with hammer and having a tack lifter at end of handle.

D: Small USMC lasting plier with hammer face, and having a tack lifter at end of handle.

E: Osborne lasting plier with wide gripping faces, VG.

F: Unknown make lasting plier, some pitting.

CB027: Choice from among five lots of EIFEL pliers, accessories for same, or scrapbook full of research about the various makers of the Eifel Plierench:

A: Lot of 10 Eifel pliers: EIFEL-GEAR; EIFEL-FLASH PAT. 5.2.16; EIFEL-GEARED; EIFEL-GEARED; EIFEL-GEARED polished; EIFEL-GEARED with mild pitting; EIFEL FLASH with round jaw; EIFEL FLASH; EIFEL FLASH; and EIFEL-GEARED polished, in original pouch with two spare jaws.

B: Lot of 10 EIFEL pliers: EIFEL GEARED; EIFEL FLASH MOD. 8"A '21; 8 1/2" PLIERENCH CHICAGO 40, ILL PAT'D 64; EIFEL FLASH, FLASH SALES CORPORATION CHICAGO, pitted; EIFEL GEARED 7"; EIFEL GEARED; PLIERENCH MULTIPLE PURPOSE TOOL, G.H. NOPAK INC. MILWAUKEE, WIS 53215; EIFEL GEARED; EIFEL GEARED; and EIFEL GEARED.

C: Chuck Garret's scrapbook of Eifel research including photos, patents, several original owners manuals; an original EIFEL combination screwdriver and bottle opener; and much more. Chuck spent at least 12 yeas putting all this information together.

D: Lot of 10 EIFEL pliers: EIFEL GEARED with cad plating; EIFEL GEARED; EIFEL FLASH MOD. 8"A '21 with little pitting; EIFEL GEARED with pitting; EIFEL GEARED '41; EIFEL FLASH PLIERENCH FLASHLS CHICAGO with nice black paint; EIFEL GEARED '49; EIFEL GEARED '36 polished; EIFEL GEARED '36; EIFEL-GEARED '47; EIFEL GEARED '45; and EIFEL GEARED '46.

E: Lot of EIFEL plier parts and accessories: Three original pouches, 17 assorted interchangeable jaws, and a clamp that can be used to turn the plier into a vise.

CB028: Choice from among six combination tools:

A: Unknown make with plier, hammer, etc., some pitting on the handles, good overall.

B: Unknown make wheel-weight tool for installing and removing wheel weights, etc., VG.

C: FARMER EVER-READY TOOL KIT fencing pliers, hatchet, hammer, alligator wrench, screwdriver, etc., VG.

D: wheel-weight tool for installing and removing wheel weights, etc., VG.

E: P-D-Q wheel-weight tool for installing and removing wheel weights, etc., VG.

F: K-D 3358 wheel-weight tool for installing and removing wheel weights, etc., VG.

CB029: Choice from among seven farm or implement wrenches:

A: (Kingman Plow Co.) 11.75-inch D242 in red paint, good.

B: MOLINE PLOW CO. 10.5-inch HX.5+0, light to moderate pitting, good.

C: MOLINE PLOW CO. 10.5-inch HX.5+0, moderate to heavy pitting, OK.

D: OHIO RAKE CO. DAYTON, O. 8.25-inch, in red paint, VG.

E: D421 (PEORIA PLOW CO.), 8-inch, VG.

F: VULCAN PLOW CO. 95, EVANSVILLE, IND 7.5-inch, VG.

G: Unknown make 1-2 silo wrench, 7-inch, VG.

CB030: Choice from among ten assorted cultivator, farm and other wrenches:

A: 12737-D IHC 5.5-inch, good.

B: Unknown double open end 5.5-inch, with square drive off edge of handle, painted black.

C: OXWELD 92, 6-inch, VG.

D: 1AA (Brown-Manly Plow Co. Malta, Ohio) 6.5-inch cultivator type, VG.

E: B14 (orphan) five square cutouts on handle, 5.5-inch in green paint, VG.

F: N9 (orphan) 5.75-inch cultivator type, VG.

G: M58 (orphan) 5.75-inch, in red paint, some pitting under paint, good.

H: Another B14 (orphan) five square cutouts on handle, this one also in green paint, VG.

I: M58 (orphan) 5.75-inch, VG.

J: Unknown (orphan) painted black.

CB031: Choice from among eight assorted tractor and implement wrenches:

A: HD911 with IHC logo, 7.25-inch, VG.

B: HEILMAN PLOW CO. EVANSVILLE, IND, 7,75-inch, in red paint, heavy pitting visible below red paint.

C: Unknown 106 8-inch, pitted.

D: R57 BUCKEYE 5.5-inch, with pin spanner on one side, VG.

E: M19 7-inch pitman, VG.

F: H-46 (THOMAS MFG.?) 6.5-inch with hammer, good.

G: 95 (VULCAN PLOW CO.) 7.5-inch, VG.

H: (Superior Drill Co. or Bickford-Huffman) B573, VG.

CB032: Choice from among eight farm and implement wrenches:

A: J H CO. 218, 9.5-inch, VG.

B: Unmarked (Empire Mfg. Co. Keokuk, Iowa) 8.75-inch, some light pitting, good.

C: IHC H911, 7.25-inch, VG.

D: Unknown 7-inch with C cast into one side, in red paint, VG.

E: D421

F: 6-inch 231, VG.

G: 6-inch 47 (BLOUNT PLOW WORKS) VG.

H: THE SHARPLES SEPARATOR CO. TUBULAR 6-inch, VG.

CB033: Choice from among four different T-handled farm wrenches:

A: Unmarked with two square and one hex opening, 11.5-inch, in black paint, VG.

B: 1126 A 11.5-inch, three square openings, VG.

C: 103 14-inch with two square and one hex openings, in black paint, VG.

D: Unmarked 12-inch with two square and one hex opening, VG.

CB034: Choice from among eight farm and other wrenches:

A: 12.5-inch 19698, heavy duty open end in black paint, good.

B: 58D230 10-inch silo-type with some pitting, good.

C: HARRY FERGUSON 10.5-inch T0-17014, graduated in inches on one side, VG.

D: DEERE & CO. 11-inch M123, some pitting, good.

E: DEERE flat steel 11.5-inch, VG.

F: (DEERE) JD-53 10.5-inch, flat steel, VG.

G: Unmarked flat steel 9.25-inch, owner marked DEERE, good.

H: 196 (DEERE), 7-inch, painted green, pitted under the paint.

CB035: Choice from among eight farm and implement wrenches:

A: IHC 8.5-inch 1059B some mild pitting, VG.

B: R127 9-inch, VG.

C: IHC P890, VG.

D: IHC HE911, VG.

E: IHC P1183, in red paint, slightly twisted handle, VG.

F: CS KW8 8-inch, red paint, with pitting under paint.

G: 17A 9.25-inch (GALE MFG/OHIO RAKE, slightly bent handle, VG.

H: IHC CHATTANOOGA CP4003 8.75-inch, some pitting, hammer beat to hell, good.

CB036: Choice from among nine assorted wrenches, etc.

A: 6-inch gas bottle wrench, unmarked, in black paint, good.

B: 6-inch gas bottle wrench marked 65.1.

C: 7-inch M215EE gas bottle wrench, VG.

D: 6-inch gas bottle wrench with a star in one side of handle, VG.

E: 6-inch gas bottle wrench with raised letter M cast into handle, in red paint, good.

F: MECO No. 1 TANK WRENCH 8-inch, VG.

G: HERBRAND No. 194 with multiple openings, fine.

H: 8.25-inch wrench with seven square openings, slightly bent at one end, good.

I: Mystery tool marked 2256, in silver paint, VG.

CB037: Choice from among eight farm or implement wrenches:

A: 13-inch owner marked PRATT MFG CO. in black paint, VG.

B: (Kingman Plow Co.) 11.75-inch D242 in red paint, pitted under paint.

C: W2 (DEERE?) 8.75-inch, fine.

D: 9.25-inch owner marked "DEERE HOOVER 700" some pitting, good.

E: D34 (DEERE) 9-inch, in red paint, VG.

F: M14 9.5-inch with three square openings, VG.

G: 7.25-inch with two-digit number that looks like 98, pitted.

H: 9.5-inch owner marked P&O CO. 295, pitted, good.

CB038: Choice from among eleven IH, IHC and other farm wrenches:

A: 40159-2 8.25-inch, in black paint, good.

B: IHC HD911, complete and fine.

C: IHC L9 or 67 8.25-inch, very good overall.

D: IHC 21264-D 7.25-inch, VG.

E: IHC 2715 9.5-inch, a few spots of pitting, good.

F: 1090C pitman 6.5-inch, fine.

G: IHC G3171 7.5-inch, good.

H. I.H. CO. 12385 D 8-inch, VG.

I: IHC 1059-B, fine.

J: H523, 7.75-inch, VG.

K: IHC 1325EA, 5-inch, good.

CB039: Choice from among eight DEERE and other wrenches:

A: 10-inch hex box ended, offset, VG.

B: AKRON BRASS MFG. INC. WOOSTER OHIO NO. 10 11.5-inch hydrant wrench, PATENT FEB 24, 1925, in black paint, VG.

C: GALE DG847, 11-inch thick flat steel, VG.

D: (DEERE) JD-53 10.5-inch pitted and in black paint.

E: (DEERE) JD-52 8.5-inch, flat steel, VG.

F: (DEERE) JD-52 8.5-inch, flat steel, VG.

G: (DEERE) JD-51 8.5-inch, flat steel, VG.

H: (DEERE) JD-52 8.5-inch, flat steel, VG.

CB040: Choice from among nine assorted farm, implement, and other wrenches:

A: SHELDON AXLE CO. 68 or 89 offset box ended with hex openings, in black paint, VG.

B: Unknown hex box marked S26 08D, has wooden dowel where a handle would have gone, the iron portion measures 4.25-inch, in green paint, VG.

C: Unknown make 9.75-inch marked 286, one square opening chipped, VG.

D: IHC 9.25-inch pitman with some light to moderate pitting, good.

E: Unusual hub cap wrench 11.25-inch with two spanners 11H17A and a W inside a shield, in black paint, VG.

F: (DEERE PLOW CO.) 196 7.25-inch, VG.

G: H260 (DEERE) 7-inch, VG.

H: DEERE 6.5-inch flat steel, VG.

I: DAIN Z-78 pitman, 6.5-inch, VG.

CB041: Choice from among seven screw adjusting IH & IHC wrenches:

A: IHC 12-inch with solid handle, moderate to heavy pitting on one side, good working order.

B: IHC 5E 12-inch with open loop handle, good working order.

C: IHC 5E 12-inch with open loop handle, pitted on both sides, good working order.

D: IHC 12-inch with solid handle, good working order, very good overall.

E: IHC 9.25-inch IE with solid handle, handle painted red, VG.

F: IHC 9.25-inch IE with open loop handle, VG.

G: IHC 9.25-inch IE with solid handle, some light pitting over most of the wrench, good.

CB042: Choice from among three screw adjusting implement or tractor wrenches:

A: IHC 9-inch 788, very good overall.

B: Vandegrift Patent 8.5-inch McCORMICK, pitted on both sides but still working, good.

C: IHC 9-inch in red paint, jaws slightly sprung, good overall.

CB043: Choice from among six assorted wrenches:

A: 41W867 32 50-cal. Browning machine gun wrench, VG.

B: DEERING HAY RAKE 6.5-inch, fine.

C: (IHC) H529 1/2 6.5-inch, VG.

D: DEERING 7.5-inch, fine.

E: IHC HD911, pitted and in black paint.

F: DEERING 7.5-inch, some very light pitting, VG.

CB044: Choice from among eight farm or implement wrenches:

A: CRANE 8.5-inch 46315 in red paint, VG.

B: 256 (IHC HOOSIER DRILL) in red paint, some pitting visible under paint, good.

C: VULCAN PLOW CO. 95 EVANSVILLE, IND. 7-inch, VG.

D: P942 +B (owner marked EMERSON CO./E. BRANTINGHAM CO.) 8-inch, VG.

E: Flat steel 6.5-inch owner marked UNADILLA SILO CO. in black paint, good.

F: Unknown 8-inch in red paint with severe pitting under paint.

G: D&M 6.75-inch with square socket on end of handle, red paint, some pitting, good.

H: VAN BRUNT C380 7-inch in green paint, VG.

CB045: Choice from among eight farm or implement wrenches:

A: Owner marked "BROWN-MANLY PLOW CO." faint 4-4 mark on one side with circular logo, 8.25-inch, VG.

B: 7.5-inch 196 or 198 in red paint with moderate to severe pitting under paint.

C: IHC 29264 D with red paint, VG.

D: D&M 6.75-inch with square socket on end of handle, red paint, moderate to severe pitting.

E: VULCAN PLOW CO. 95 EVANSVILLE, IND. 7-inch, some moderate pitting, good. F: 196 7-inch with light to moderate pitting, good.

G: IHC HD911 VG.

H: Unknown 8.75-inch moderate to heavy pitting, good.

CB046: Choice from among nine assorted wrenches:

A: 23290? PATD 9-inch buggy or vehicle wrench, VG.

B: 23290? PATD 9-inch buggy or vehicle wrench, VG.

C: 6-inch 23290? vehicle or buggy wrench, some light pitting.

D: 5.75-inch vehicle or buggy wrench with red paint, faint maker's mark on handle, good.

E: 154? 8-inch owner marked COLLINS PLOW, some pitting, good.

F: DELCO Light Plant 8.25-inch CYLINDER NUT 95095 CONNECTING ROD SCREW, VG.

G: (VULCAN PLOW) 95 7-inch, VG.

H: RONSON ALLIGATOR 8.5-inch with scales, a hex box on one end, two square openings and cap lifter, VG.

CB047: Choice from among five assorted wrenches:

A: PLANET JR. 3 6.5-inch, VG.

B: PLANET JR. 3 6.5-inch, VG.

C: PLANET JR. 3 6.5-inch, marked MADE IN UNITED STATES OF AMERICA on one side, in orange paint, VG.

D: Orphan 5-inch with square socket and open end both on one end and round opening on other end, VG.

E: 5.5-inch single end alligator, one jaw chipped at end, good.

CB048: Choice from among four assorted wrenches:

A: CLAY & BAILEY KC MO, 7-inch, VG.

B: 4.75-inch owner marked BIZZELL TOOL CO. in green paint, good.

C: T-handled 7.5-inch crow's foot, in green paint, VG.

D: Unusual bed key wrench, 7.25-inch, VG.

CB049: Choice from among 19 assorted wrenches:

A: JOHN DEERE 15.75-inch, VG.

B: 883 (J.I. CASE PLOW WORKS) 14.5-inch, in red paint, VG.

C: BT6621B 14.25-inch ratchet "WITH TORQUE WRENCH HERE, TORQUE ON BOLT IS DOUBLE, THAT SHOWN ON WRENCH, tilting head, VG.

D: F239 (OLIVER PLOW) 9.5-inch, in red paint, VG.

E: 7-inch 196 in red paint, some pitting, good.

F: 9.5-inch double open end with square lug, in red paint, some pitting.

G: GALE 21 8.75-inch, VG.

H: (VULCAN PLOW) 95 7-inch, VG.

I: COLLINS PLOW CO. 124 7.5-inch with hammer, VG.

J: F239 (OLIVER PLOW) 9.5-inch, in red paint, VG.

K: ADJUST-A-BOX 10-inch PAT. 2,912,891, VG.

L: DELCO light plant SPARK PLUG-GEN. NUT 90257 CYLINDER STUD- BATTERY NUT, 8-inch, VG.

M: Z-6 or 9-Z 8.25-inch, in red paint, some mild pitting, good.

N: (VULCAN PLOW) 95 7.5-inch, VG.

O: 196 7.25-inch in green paint, some mild pitting, good.

P: 272 (KINGMAN PLOW) 10-inch, VG.

Q: M231 pitman 6.75-inch, some light pitting, good.

R: 67 (MOLINE IRON WORKS) 7-inch, VG.

S: IHC HE911, VG.

CB50: Choice from among 21 cultivator wrenches, etc.:

A: STANDARD 6.25-inch in red paint, VG.

B: PLANET JR. 2 cut-out, VG.

C: IRON AGE C9 cut-out in orange paint, VG.

D: STANDARD 6.25-inch, VG.

E: Unknown 6 or 9 6.25-inch in red paint, VG.

F: 1AA (Brown-Manly Plow Co. Malta, Ohio) 6.5-inch cultivator type, in green paint, VG.

G: 1AA (Brown-Manly Plow Co. Malta, Ohio) 6.5-inch cultivator type, in green paint, VG.

H: 1AA (Brown-Manly Plow Co. Malta, Ohio) 6.5-inch cultivator type, in green paint, some pitting.

I: 1AA (Brown-Manly Plow Co. Malta, Ohio) 6.5-inch cultivator type, in green paint, VG.

J: 1AA (Brown-Manly Plow Co. Malta, Ohio) 6.5-inch cultivator type, VG.

K: Unknown make (orphan) 5.5-inch, in red paint, VG.

L: STANDARD 6.25-inch, in black paint, good.

M: 10 cultivator wrench, 6.25-inch in green paint, VG.

N: 6-inch 7865 cultivator in green paint, VG.

0: Orphan 5-inch marked 3, in red paint, good.

P: Orphan 4.75-inch thick flat steel, good.

Q: EMERSON M518, mild pitting, good.

R: 170 4.75-inch with some pitting, in black paint.

S: PLANET JR. 3 MADE IN UNITED STATES OF AMERICA, in red paint, VG.

T: IRON AGE C9 cut-out, VG.

U: CHICAGO SPEC MFG. CO. 3024 MALLEABLE, VG.

Patented Adjustable Wrenches:

051._____ Three wrenches: HEIMBACH LEVER-WRENCH, 8-inch model with moderate to heavy pitting, still in working condition; 8-inch Any-Angle wrench with tilting jaw, very good overall; and a GELLMAN 9-inch No. 91, complete and VG.

052._____ BOOS TOOL CORP. K.C. MO PAT PEND 6-inch handle-adjusting nut wrench, VG.

053._____ Three 6-inch wrenches: Zillox patent made of stamped sheet steel, very good; a HELLER MASTERENCH, very good; and a GELMAN WRENCH CORP. NO. 61, VG.

054._____ Scarce C.P. WRENCH CO. Field's Patent (U.S. No. 888,795) 5.5-inch self-adjusting wrench with folding pocket knife, the tip of the knife blade is broken, some mild pitting, good overall.

055._____ Pair of Boos Tool Corp. PAT PEND K.C. MO patented adjustable wrenches 8-inch and 6-inch, both fine.

056._____ Baxter Patent W. BAXTER - PAT. DEC 1, 1868 / W. HAWKINS - DERBY, CT. 8.25-inch. Hawkins Hardware Mfg. Co. of Derby, Conn. was one of the manufactures of the Baxter patented wrenches. Some mild pitting, very good overall.

057._____ HandE 10 1/4-inch helical screw quick adjust nut wrench, MFD BY H & E WRENCH CO. NEW BEDFORD, MASS. (with a H & E logo) . Patented by Edwin J. Evans and George E. Hemphill both of Salt Lake City, Utah, very good overall.

058._____ HAYDEN Patent (U.S. No. 228,755) 4-inch center adjusting pocket or bicycle wrench, made on a patent issued June 15, 1880 to Randolph Hayden of Middletown, CT, the makers name and patent date are faint due to mild pitting.

059._____ Lot of five pocket or bicycle wrenches: 5-inch BECKLEY RALSON, very good; unmarked 5.25-inch, good; 5-inch missing adjuster screw; and two 4-inch models one marked BILLINGS & SPENCER No. 97.

060._____ Four smaller Auto and Bicycle pocket wrenches: unknown make 7.5 inch Auto that has NO. 10 cast into handle; 7-inch unmarked Auto; 5-inch WALDEN No. 1; and an unmarked 5.25-inch that is locked up and has light pitting.

061._____ Unknown make 6-inch screw adjusting monkey wrench with wooden handle, appears early, no markings visible, good handle, good overall.

062._____ Unusual WALCO No. 0 6-inch HEX WRENCH, complete and in fine overall condition.

063._____ AUTO COES 6-inch all-steel monkey wrench, a few spots of light pitting, very good overall.

064._____ Three adjustable THE ELGIN alligator wrenches JUNE 8, 1897 patent; two regular and one IMPROVED with star on side, all VG.

065._____ Lot of five alligator wrenches: four single ended and one double ended.

066._____ Three adjustable THE ELGIN alligator wrenches JUNE 8, 1897 patent; two regular and one IMPROVED with star on side, all VG.

067._____ EARLY L. & A.C. COES 6-inch wooden handled monkey wrench, complete with spit nut to secure handle, fine overall.

068._____ Four adjustable alligator wrenches: three are THE ELGIN PAT.JUNE 8, '97, one very good, and two that needs a little work; plus THE VICTOR by KRAEUTER PAT. MAY 26, '03, good overall.

069._____ H.D. SMITH SIS wrench, 6-inch all steel monkey wrench, complete and fine.

070._____ Pair of BILLINGS & SPENCER pocket wrenches: Model A with cad plating, very good; and another model A, that needs cleaning.

071. to 073. OPEN.

074._____ TRIMO 10-inch all-steel screw adjusting nut wrench PAT'D 12-19-1911, very good; and two 8-inch BONNEY S-handled Crescent types, one with nice welded repair to outer jaw, the other VG.

075._____ RARE Verharen Patent (U.S. No. 685,656) combination adjustable nut wrench and adjustable alligator wrench, center adjuster, made on a patent issued Oct. 29, 1901 to Frank T. Verharen of Spencer, Iowa. To our knowledge, this is the first such wrench to come to auction.

Pipe Wrenches (First Bunch):

076._____ Scarce Stanley SW 10-inch Stillson-type adjustable pipe wrench, complete and very good overall.

077._____ PEXTO & HUDSON FORGE CO. 12-inch Stillson-type pipe wrenches, both VG.

078._____ Lot of three 12-inch Stillson-type pipe wenches: OSWEGO TOOL CO.; J.P. DANIELSON; and an unknown make all with handles painted red, VG.

079._____ Five screw-adjusting pipe wrenches: two 10-inch; two 8-inch including a nice PERFECT HANDLE; and one 6-inch WALWORTH STILLSON, all in very good usable condition.

080._____ Six small adjustable pipe wrenches: four 8-inch Stillson-types one by WALWORTH; one OSWEGO TOOL CO; a 6-inch J.P. DANIELSON; and an all-steel 6-inch RIDGED.

081._____ Perfect handle 12-inch screw-adjusting pipe wrench with well-worn but intact handle, good overall.

082._____ Lot of four 6-inch wooden handled monkey wrenches: PEXTO: STILLSON; ERIE TOOL WORKS; TOBRIN, all VG.

083._____ Lot of three 6-inch wooden-handled STILLSON pipe wrenches.

084._____ Lot: two special purpose tongs or crimpers; and three pair of end cutters: STARRETT 235-7-inch missing both removable blades; and a nice pair by BERNARD.

Adjustable Pocket, Bicycle, Motorcycle, and Auto wrenches: (First Group)

085._____ Three small center nut adjusting nut wrenches: 6-inch KING DICK; C.E. BILLINGS PATENT 4.5-inch Billings & Spencer, very good; and a 4.25-inch C.E. BILLINGS PATENT 4.5-inch by Billings & Spencer frame open on one side, VG.

086._____ Scarce Billings & Spencer Model B PIERCE ARROW auto or cycle wrench with center adjuster nut, fine overall.

087._____ Pollard Patent (U.S. #166,553) hand vise manufactured by the Lowell Wrench Co. of Worcester, Massachusetts on a patent issued August 10, 1875 to Leonard L. Pollard of Worcester, Massachusetts, this example is VG.

088._____ Nice FAIRMOUNT 5-inch PIERCE ARROW pocket wrench with center adjuster nut, fine overall.

089._____ COES Searle Patent (U.S. 689,692) 6-inch all-steel pocket wrench made on a patent issued December 24, 1901 to Frederick Searle of Worcester, Massachusetts, this example is complete and VG.

090._____ Unusual MOSSBERG WRENCH CO. Model C Mossberg Patent (U.S. No. 552,325) patented December 31, 1895 by Frank Mossberg of Attleborough, Massachusetts, this example has about 60 percent of the original nickel plating, the hole in the end of the handle was likely done by a previous owner, VG.

091._____ Tower & Lyon SAFETY pocket wrench with center adjuster nut, very good overall.

092._____ IVER JOHNSON & CO. MFR'S FITCHBURG, MASS. USA - PAT APPLIED FOR, 4.25-inch, with revolving 4-bladed screwdriver in end of handle, nice nickel plating, very good overall.

093._____ Scarce HEWET Patent (U.S. #87,774) LITTLE GIANT 5-inch tubular adjusting nut wrench manufactured by Champlin & Spencer of Chicago on a patent issued February 27, 1869 to Henry W. Hewit of New York, NY, this example has a few spots of pitting, and the bar is just slightly bent, very good overall.

094._____ "Spaulding Mach. Screw Co. Buffalo, NY, W. Dicks Patent (U.S. No. 509,151) 5-inch bicycle wrench, made on a patent issued Nov 21, 1893 to William Dicks of Buffalo, New York, this one is missing the little screwdriver that would from bottom of handle when jaw was opened, some peeling nickel and some old Scotch tape that needs to be removed, jaw sprung, good overall.

095._____ Nice Tower & Lyon GEM 3-inch screw adjusted monkey wrench, just a trace of original nickel plating remains, very good overall.

Farm Implement and Misc. (First Lot)

096._____ Child-sized Case-o-matic DRIVE hat with intact chin strap with sliding fastener.

097._____ ALLIS-CHALMERS CONTROL AND SWITCHGEAR combination plier with small adjustable Crescent-type wench at end of one handle, likely made for A-C by the Diamond Calk and Horseshoe Co. of Duluth, MN. This pair is complete and fine.

098._____ ALLIS-CHALMERS A-C pith type helmet or hat, in orange paint with blue and gold letters, has had a puncture just outside the logo on the top front, can easily be mended and is otherwise VG.

099._____ Two Massey-Harris 14.5-inch 217C DISC wrenches, both VG.

100._____ IHC 8.5-inch Z788 with IHC logo (IHC part M446M) 8 1/4-inch all metal monkey wrench with hex adjusting nut, very good; and an IHC 7-inch PAT. SEP. 7, '97 8.5-inch Vandegrift's patent all metal monkey wrench, complete and fine.

101._____ Lot of 9 assorted pair of plier or plier-like tools: 6.25-inch BRIDGE TOOL CO. Cronk-type pliers; unknown make 6.25-inch pliers, some pitting; unknown make 5.5-inch clamping piers missing part of clamp; TRUTH side cutters, pitted; PEXTO 6.5-inch with offset jaws; C.S. OSBORNE &CO. 6-inch lasting pliers with chipped jaw; 5-inch PS&W gas-type pliers; DIAMOND EDGE 7.5-inch plier with side cutter, pitted; and slip-joint pliers with handles shorted to 5.25-inch.

102._____ Lot of 9 assorted farm or implement wrenches: VAN BRUNT D-380, very good; GDP CO. (Grand Detour Plow Co) G111, very good; IHC R319 with circular IHC logo, very good; NATIONAL 9-inch, very good; IHC ZA810 pitman wrench in red paint, has circular IHC logo, very good; UNIVERSAL cutout with pitting; STANDARD cultivator wrench, very good; IHC R172 with circular IHC logo, very good; and Moline K486 curved, VG.

103._____ Lot of 8 wrenches; pitted 9-inch auto; six S-handle; and one stamped steel open end.

104._____ Pair of aluminum wrenches: 8-inch RITTER with 3 1/4 & 1-inch openings; and a 9.25-inch LADISH CO. TRI CLOVER H25H2 with 3-inch opening, both VG.

105._____ Two medical cutting tools similar to side cutters; on top a BERNARD PATENT 12-inch side cutters, with compound joint, made by the W. SCHOLLHORN CO. NEW HAVEN,, CONN., nickel plated, very good overall; on bottom an 8-inch BLAKE & CO., also marked D.&O. on other side, with offset bowed jaws, VG.

106._____ Lot of six MAYTAG stamped steel wrenches.

107._____ Two wrenches: S.L. & S.F.R.Y. (St. Louis San Francisco Railway AKA FRISCO) S-handled open end, some pitting, painted black, good; and an International Harvester 350370RI also painted black.

108._____ Unusual hand forged S-handled open ended wrench that was likely made from an old file or rasp, very well made.

109._____ Pair of patented hog ringers for putting rings into hog noses: the pair on bottom DeNeui Patent (U.S. #1,931,576) made on a patent issued October 24, 1933 to Dickie De Neui of Grundy County, Iowa, this pair is complete and very good; and the pair on top and earlier looking pair with faint patent date.

110._____ Two wrenches: J. H. WILLIAMS & CO., BROOKLYN USA, open end CHECK NUT WRENCH, very good; and a NASH double open ended automobile wrench, painted black, VG.

111._____ Unusual No. 5319 10-inch 1 5/8-inch hex socket in green paint, very good, and two small 1 1/2-inch socket with square drive; and a 1 5/16-inch T-handled socket, VG.

112._____ Lot of three implement wrenches: STANDARD 6.25-inch cultivator wrench, very good; unknown make 6-inch S-handle, very good; and an IRON AGE C9, with letters highlighted with white paint, good.

113._____ Lot of six wrenches: four flat steel one with spanner; one painted black and the bottom one marked DREIS & KRUMP CHICAGO ILL; and two different AMERICAN SEATING CORP.; one cast iron, 17617 342 DESK, very good; the other 18044 with pressed steel handle, VG.

114._____ Lot of two farm wrenches: 7-inch T-handle square socket with screwdriver at end of handle, and hook opposite the socket, very good; and a (CASE) 13074 6.5-inch open end with faint eagle on back side, VG.

115._____ UNKNOWN MAKE No. 617A-18 crank handle in John Deere green paint, nice wooden handle, 1 3/8-inch circular opening with set screw, VG.

Monkey Wrenches:

116._____ Four wooden handled monkey wrenches: 12-inch with green handle; and three 10-inch models including a PS&W.

117._____ Lot of four monkey wrenches: 12-inch all metal B&C; 10-inch BILLINGS COES all metal; 8-inch W&B RAILROAD SPECIAL and another 8-inch all metal railroad wrench.

118._____ Pair of 12-inch B&C wrenches; B&C wooden handled monkey wrench; and BEMIS & CALL combination pipe and nut wrench with long adjuster sleeve, VG.

119._____ Pair of 12-inch wrenches: unknown make monkey wrench, tag on it says it is a model K51; and a Bemis & Call combined pipe and nut wrench with short hex adjuster nut., handle weathered.

120._____ Lot of nine monkey wrenches: W&B 12-inch all-steel; 12-inch INTERMEDIATE with crack in moveable jaw; 10-inch MEADVILLE PCC & STL (railroad) all-steel; 8-inch GIRARD, well worn; unknown make 8-inch, good; 8-inch BEMIS & CALL, very good; 7-inch PS&W, good; 6.5-inch GIRARD, good; and a 6-inch COES with pitting and nicked handle.

121._____ Lot of eight wooden handled monkey wrenches: 12-inch DIAMOND EDGE with carriage bolt holding handle; 12-inch PS&W, good; 12-inch A.G. COES missing about 1/3 of wooden handle; 12-inch SHAPLEIGH, very good; 12-inch BILLINGS, missing about 1/2 of wooden handle; 10-inch GIRARD; 10-inch COES with pitting and cracked handle; 10-inch COES, numerous nicks and dings, good overall.

122._____ Three 15-inch screw adjust monkey wrenches: ICRR (Illinois Central Railroad) Coes-type that would have had a wooden handle, but someone has put a pipe in where the wood was; needs cleaning, good; a W&B all-steel RAILROAD SPECIAL, looks like it was bead blasted or cad plated, very good; and a PEXTO SAMSON all-steel model that also looks blasted, VG.

Miscellaneous Wrenches:

123._____ Five assorted valve or gas bottle wrenches: AIRCO; AIRCO; Oxweld; Clark; and one marked 65.1, all VG.

124._____ Three misc. wrenches: 8.75-inch 260 with 1 5/8-inch open end, very good; Bonney? (B inside a shield) 33F with 7/8 & 15/16 open ends, very good; and a INW 32 8.5-inch malleable with unusual open ends, VG.

125._____ Two IHC wrenches that go together: U50 (with IHC logo), 8-inch VG. and U51 with IHC logo, 9-inch, VG.

126._____ Seven IHC or related wrenches: 1903 with a square socket on each end, painted black, good; P&O 4135, handle bent and light pitting, good; 21264-D with IHC logo, very good; I.H. CO. G.3171, fine; G3171 with IHC logo, very good; 1326E, with IHC logo, very good; and 2715 with IHC logo.

127._____ Seven assorted wrenches: WALDEN WORCESTER automotive socket with three hex openings; 7.5-inch S-1, very good; 7345C OLIVER BLACKHAWK, fine; IHC H529, pitted and painted black; CHALLENGE 7-inch, some pitting, very good; DEERE flat steel; 159 DEER malleable, pitted.

128._____ Three misc. wrenches: MARQUETTE MFG. ST. PAUL, MINN battery terminal pliers; pitman with pitting; and a vehicle wrench marked PATD on one side with faint 4-digit number on other side, fine..

129._____ BAND-IT CO. DENVER COLORADO, screw-adjusted banding tool, complete and VG.

130._____ Lot of six automotive socket wrenches including five brace-types including MOTOR WHEEL CORP. 03522; and WALDEN WORCESTER 5/8 6020.

131. to 139. OPEN.

140._____ Scarce Gates Patent (U.S. #357,986) 8-inch adjustable nut wrench, lower jaw moves when nut above top jaw is turned, marketed as the GATES BOLT WRENCH, made on a patent issued Feb. 15, 1887 to Alfonso D. Gates of Cleveland, Ohio, complete and VG.

141._____ Lot of four 6-inch monkey wrenches: COES wooden handled, very good; INTERMEDIATE all-steel, very good; W&B, very good; and unmarked model with rough wood.

142._____ Lot of four 6-inch wooden handled monkey wrenches: unknown make with cracked handles; GIRARD with brass hex-shaped adjuster; L. COES PAT. COES WRENCH CO. very good; and a GIRARD with improper nut securing handle.

143._____ Three all-steel 6-inch monkey wrenches: COES WRENCH CO., very good; W&B, very good; and another COES WRENCH CO., VG.

144._____ Lot of five 6-inch wooden handled monkey wrenches: HERSCHEL with cracked handle; GIRARD, very good; PS&W with crude homemade handle; unknown make, very good; and unknown make marked 6 on movable jaw and on handle socket, VG.

Buggy and Wagon Wrenches:

145._____ Lot of 5 vehicle or buggy wrenches, one in red paint and one in black paint.

146._____ Lot of 5 vehicle or buggy wrenches including two have owner ID tags saying they are EBERHARD models one with square box and one with hex, all VG.

147._____ Pair of vehicle or buggy wrenches: one marked DAYTON 2812 PATENTED; and the other is marked BANNER 2813B PATENTED, both VG.

148._____ Three small buggy or vehicle wrenches: DAYTON PLOW CO.?; MILLERS ST. LOUIS; and #7325, all VG.

149._____ Thompson Patent (U.S. No. 234,091) adjustable buggy wrench with wooden handle Nov. 2, '80 patent date cast into moveable jaw, a few patches of pitting, good overall.

Adjustable Pocket, Bicycle, Motorcycle, and Auto wrenches: (Second Group)

150._____ Three INDIAN MOTOCYCLE wrenches: one screw-adjust AUTO style with the INDIAN name cast into the end of the handle, light pitting from a previous cleaning, very good; and two sheet steel wrenches both marked INDIAN MOTOCYCLES, one with light pitting, the other VG.

151._____ Lot of four BILLINGS pocket wrenches: 4.25-inch A, center adjust, very good; 1879 patent 4.25-inch center adjuster, very good; another 4.25 inch C.E. BILLINGS patent center adjuster, very good; and a NO. 97 4.25-inch, VG.

152._____ Lot of four wrenches: 8-inch BILLINGS S-handle, very good; two unmarked 7-inch AUTO, both very good; and a 5.5-inch BILLINGS No. 96, VG.

153._____ Two malleable valve tools: 12.5-inch FLEXIBLE VALVE REMOVER PAT OCT. 22, 1907, very good; and a 12-inch unmarked, VG.

154._____ Lot of five buggy or vehicle wrenches, two in red paint.

155._____ Lot of four adjustable AUTO nut wrenches: MOORE 12-inch, very good; unknown 11-inch, cracked on back of movable jaw; DIAMOND TOOL & HORSESHOE CO. 11-inch, fine; and a WAKEFIELD WRENCH CO. 10-inch, VG.

156._____ Lot of six adjustable 9-inch AUTO nut wrenches: MOORE DROP FORGING, very good; WIZARD NO. 9, very good; and four unknown makes, all good.

157._____ Pair of "dog bone" wrenches: CRAFTSMAN GERMANY, very good; and J.H. WILLIAMS PAT PEND with bent handle and some light pitting.

158._____ Lot of three wrenches: BLACKHAWK 4320 1/2 socket, very good; WIZARD NO. 9, 9-inch adjustable AUTO, very good; and a BILLINGS & SPENCER 10-inch S-handle adjustable in blue paint, good.

159._____ Lot of three assorted ratchets: WILL B. LANE, CHICAGO, ILL PAT. JAN. 14._____'80, very good; INDUSTRO MFG, very good; and a BLACKHAWK 34945 3/8-inch, VG.

Brass and Beryllium Wrenches:

160._____ AMPCO W-212 14-inch non-sparking adjustable pipe wrench used by gas companies and by others where there is a chance of an explosion, complete and fine overall.

161._____ SHERWOOD BRASS, DETROIT MICH 4.5-inch brass wrench with square lug, VG.

162._____ MECO No. 1 tank wrench, 8-inch, brass, VG.

163._____ AMPCO P35 non-sparking plier and wire cutter, used anywhere a spark might cause an explosion, complete and VG.

164. to 170. OPEN.

Quick Adjust Nut and Pipe Wrenches (First Group)

171._____ BELL WRENCH CO. 10-inch quick adjust wrench marked with the April 25, 1905 patent (U.S. No. 788,388) issued to Benjamin Franklin Woodward of Sarcoxie, Missouri and manufactured by Bell Wrench Co. of Tulsa, Oklahoma. The patent that more closely resembles this wrench is the one issued to William Bell of Tulsa, Oklahoma (U.S. No. 1,345,983) which is a refinement of the Woodward patent. This example is complete and VG.

172._____ QUICKSET Nielander Patent (U.S. No. 1,301,159) 10-inch quick adjust pipe wrench, adjusted by pushing a toggle that disengages the worm screw, made on a patent issued April 22, 1919 to Joseph Nielander of Kokomo, Indiana, this example was produced by F.W. MACKE of Kokomo, it is VG.

173._____ Nielander Patent (U.S. No. 1,301,159) 12-inch quick adjust nut wrench, made on the same patent as the pipe wrench above, the wooden handle on this one may have been replaced, and the toggle spring needs work, good overall.

174._____ Bonner Patent (U.S. #737,199) "VICTOR" 10inch quick adjust nut wrench made on a patent issued August 25, 1903 to Clarence Bonner of Cherrypoint, Illinois, this example will easily clean to very good overall condition.

175._____ Pair of pocket or bicycle wrenches: Bellows Patent U.S. 228,437) quick adjust 6-inch nut wrench made by the STANDARD TOOL CO. of Athol, Massachusetts, this example is very good; plus a 5-inch HARPER PAT. APL'D FOR center adjusting nut wrench (these have been attributed to Harper Supply Co., Chicago, IL), has A.G. stamped into other side of jaw, 40 to 50 percent plating, good overall.

176._____ Unusual 10-inch quick-adjusting Auto nut wrench SEAHOLM & SANDELL. MFG. CO. INC. DETROIT. U.S.A. PATENTS PENDING, has been painted black, good overall.

177._____ St. Claire Patent (U.S. No. D186,132) 14-inch self-adjusting pipe wrench marked on one side 14" MAGNUM TOOL CO. PAT PEND / MUESCO-HOUSTON TEXAS, this one is complete and VG.

178. to 179. OPEN.

180._____ Ultra Rare Smith Patent (U.S. No. 497,138) IDEAL WRENCH quick adjust nut wrench, manufactured by Pickel & Smith of St. Louis, Missouri on a patent issued May 9, 1893 to Emery Smith of St. Louis, this example has patches of pitting on both sides, a fine original handle, and it is in fine working condition.

Automotive Wrenches (First Group)

181._____ Lot of six adjustable AUTO wrenches: 15-inch UNIVERSAL METAL PRODUCTS L.A. CALIF, very good; 15-inch DIAMOND CALK & HORSESHOE CO., clear coated, very good; 14-inch unknown make, clear coated, very good; 12-inch unknown make painted black; 11-inch FAIRMOUNT CLEVELAND, painted black; and 11-inch VLCHEK, VG.

182._____ Lot of 16 assorted AUTO nut wrenches most painted black: FAIRMOUNT CLEVELAND marked on moveable jaw and on bar, very good; 11-inch unknown; WIZARD No. 9, very good; 9-inch marked 50 on end of handle; WAKEFIELD NO. 19; and nine 9-inch by unknown makers.

183._____ Lot: piston ring pliers; WEED chain pliers; four open ended wrenches, a DELCO light plant wrench and an IH implement wrench.

184._____ Lot of three early automotive hub caps; on top is a very nice CHEVROLET, in the middle is a beat up and cracked FORD; and we are not sure who made the one on the bottom, but it is VG.

185._____ ADAMSON MFG CO. EAST PALESTINE O. PATENTED APR. 1, 1913, tire vulcanizer used to clamp and heat seal the patches on tire inner tubes, complete, fine.

186._____ Lot of 15 automotive socket and speed-type wrenches including a WALDEN 01824 with rotating 9/16 and 3/4 sockets; WALDEN 1620 TOMAHAWK; WALDEN 2418; DURO 5/8; etc.

187._____ Lot of 10 FORD wrenches: six lug wrenches including a M-40-17017; and M-01A-17017; a 5Z-152 socket; 01A-17017B 55; 01A-17017B M35; and M 01A-17017 B.

188._____ Lot of nine adjustable AUTO nut wrenches: Two 11-inch models; one with tire tool in end of handle; and seven 9-inch models including a WAKEFIELD No. 19.

189._____ Lot of 10 FORD & FORDSON wrenches: five lug wenches; one marked Ono in script lettering; a FORDSON M2372; a FORD 9N1701 with graduated bar; FORD 01A 17017B 85; two FORD 01A-17017 B.

190._____ Lot of nine 9-inch AUTO nut wrenches including a WAKEFIELD No. 19; and a WIZARD No. 9.

191._____ Two automotive valve tools: BUFFUM TOOL CO. (LOUISIANA, MO) valve spring compressor with pivoting head, missing the hook and length of chain that would have originally come with it, very good overall; and a malleable iron valve tool, VG.

192._____ Lot of 10 assorted 9-inch AUTO adjustable nut wrenches.

Ratchet Wrenches:

193._____ Unusual Carlson Patent (U.S. No. 897,584) ratchet wrench set in original tin box, made on a patent issued Sept. 1, 1908 to Victor Carlson of Peoria, Illinois, all parts have a heavy coating of old nickel, most also have a light dusting of surface rust, but will clean to very good overall condition, includes an original albeit tattered and brittle instruction pamphlet, from the photo on the pamphlet, it looks like this one is missing a breaker bar or at least part of one, comes inside the original tin box with original albeit detached tin lid, with partial label on the end of the box.

194._____ Lot of seven assorted ratchets including a CRAFTSMAN 10.5-inch STAINLESS; a JO-LINE Series A 9/16-inch; DURO METAL PRODUCTS No. 673; RF22 BONNEY; IMPERIAL 7/16; an OHIO with square socket, socket is cracked, etc.

195._____ Lot: five ratchet-type tools including one marked CHICAGO METAL DEVICES CHICAGO PATENTED MARCH 10, 1914 ratchet with bent handle; 775 SIOUX ALBERTSON &CO. SIOUX CITY, ratchet; two INDUSTRO MFG ratchets; ratchet marked TO RAISE HEBEN, TO LOWER SENKEN PATENT APPLIED FOR; and a JIFFY CUTTER PAT. JUNE 25, '18, PAUL W. KOCH &CO. CHICAGO.

Crescent Type Wrenches:

196._____ WESTCOTT No. 76 8-inch S-handle crescent-type, VG.

197._____ Lot of six S-handle Crescent-type wrenches: BEMIS & CALL 12-inch No. 48, some rust; WESTCOTT 10-inch No. 80, very good; B&C 8-inch with bent handle, good; 8-inch DIAMOND EDGE, very good; B&C 8-inch, good; and WESTCOTT 8-inch, will clean to VG.

198._____ Lot of four S-handle Crescent-type wrenches: BILLINGS 8-inch No. 48, fine; WESTCOTT 6-inch No. 75, needs cleaning, good; B&C 6-inch, very good; and B&C 6-inch No. 48A, VG.

199._____ Lot of four Crescent and Crescent-type wrenches: the top three were made by the Crescent Tool Co.: 15-inch 380mm, 10-inch CRESTOLOY, 10-inch DROP FORGED; one on bottom marked BET R-GRIP MADE IN USA FORGED VANADIUM STEEL, with 5/8-inch hex opening in end of handle; all VG.

200._____ Two S-handle Crescent-type wrenches: B&C 10-inch No. 48 with bent handle; and an 8-inch, both need cleaning.

201._____ Pair of S-handled Cresent-type wrenches: WESTCOTT 8-inch, complete and good; and a 6-inch B&C (Bemis & Call), with some glue from having tape on the handle, good overall.

202._____ Lot: 4-inch Crescent type wrench marked 1/4 X 4" on one side, very good; a BELL SYSTEM wire or conduit splitter or stripper, very good; and a pair of 6-inch pliers, marked ????.

203._____ Two 8-inch S-handled Crescent wrenches: BONNEY, very good; and WESTCOTT No. 78 with green handle, VG.

204._____ Pair of 6-inch Crescent types: WESTCOTT #76 with red painted handle, good; and a 15A BEMIS & CALL CO. VG.

205. to 209. OPEN.

Automotive Wrenches: (Second Group)

210._____ Lot of five MAXWELL flat steel auto wrenches: two No. 4’s; one each No. 3; #2 and #1.

211._____ Lot of six assorted wrenches including one marked MAXWELL made of flat steel that looks faked.

212._____ Lot of five S-handle wrenches: three hand forged; one 11-inch FRISCO SYSTEM, very good; and a 8.5-inch with owner ID of J2 on handle, painted black.

213._____ Lot of five assorted wrenches: 13-inch with square socket, painted black, some pitting; 10.75-inch BARCALO BUFFALO PAT. 1,870,612, multi wrench, some mild pitting; 326A6 8.75-inch open end with spanner, very good; JWB 11.75-inch silo? wrench, good; and an automotive lug wrench, painted black, good.

214._____ Lot of seven assorted wrenches: 3-IN-1 SPUD WRENCH NO. 3001 CHICAGO SPECIALTY MFG. CO.; and six flat or stamped steel wrenches.

215._____ Three automotive wrenches: M2435 socket wrench; TIRE CARRIER WRENCH 678225; and a TAPPET ADJUSTING WRENCH.

Plier-Type Wrenches:

216._____ Two wrenches: TRUTH 7-inch self-tightening, very good; and a 7.5-inch BOKER U.S.A. plier, VG.

217._____ Pair of wrenches: Reinhard-McCabe 10-inch plier-type, complete and very good; and a LIGHTNING WRENCH by the HAMPTON MACHINE & TOOL CO. HAMPTON, IOWA, complete and VG.

218._____ Lot of eight plier or plier-like tools includign a fencing plier with hammer and staple puller; cobbler's hammer, etc.

219._____ Lot of 10 plier or plier-like tools including a pair of pincers; lasting pliers; Cronk-type fencing plier; an offset pair, etc.

220._____ Lot of 13 plier or plier like tools including a S. NORVELL SURE GRIP Cronk-type; gas plier; BERNARD'S parallel jaw, etc.

221._____ Two wrenches: CRESCENT No. 923-7 plier with side cutter, very good; and a drain plug wrench marked R.F. POMEROY, BAY CITY, MICH on handle.

222._____ Lot of pliers: 10-inch PEXTO gas plier; unknown 10-inch gas plier with red handles; 8.5-inch UTICA gas plier, fine; 8-inch BUFFUM TOOL CO. LOUISIANA, MO gas plier, very good; and a W.H. THOMSON design patent (U.S. No. 45,919) offset gas plier by H.D. SMITH made on a design patent issued June 9, 1914, VG.

223._____ Lot four pliers including an 8-inch pair marked U.S. with wire cutter, fine; UTICA No. 1-7, fine; GRIPLOCK 8-inch with some pitting and frozen scew; BERNARDS SCHOLLHORN Patent April 5, 1915 spring-loaded plier with nipper; and a 6-inch BERNARD end cutter.

International Harvester and Related Companies Wrenches & Tool Boxes

224._____ Four IHC wrenches: 1095-B 8.5-inch, very good; H9911, very good; H911 some light pitting, good; and IHC 116H, VG.

225._____ Pair of malleable farm or implement wrenches: P.&O. Co. (IHC) 5283 (IHC) 10-inch, complete and good; EMERSON (same as previous wrench) pitted and painted black.

226._____ Two malleable farm or implement wrenches: IHC CHATTANOOA CP4003 with hammer, very good; and D&M 6.5-inch with square socket on end of handle, two open ends and a square opening, VG.

227._____ Four farm or implement wrenches: IHC P890, complete and fine; IHC G3173 4.5-inch; and an IHC P813 4.25-inch, pitted; and an IHC M-6625, complete and fine.

228._____ Lot of four farm or implement wrenches: ZA810 with letters vertically laid out, IHC logo on other side, good; ZA810 with letters horizontally laid out, faint IHC logo on other side, good; P1183 with twisted handle, otherwise very good; and IHC 2716, pitted.

229._____ Lot of four farm or implement wrenches: Two pitted IHC 5283 with red paint; an IHC 1059B in red paint, fine; and one owner has painted I.H.C. on one side of and 770 on other side, painted red, VG.

230._____ Lot of four farm or implement wrenches: on top is owner ID of DEMPSTER MILL CO., red paint with pitting under paint; two pitted IHC ZA810 wrenches, one in red paint; and pitted vehicle wrench in primer.

John Deere Wrenches, Tool Boxes, etc.

231._____ Three assorted wrenches: CHILLED PLOW (later DEERE) J. OLIVER IND. 7.75-inch, painted green, some pitting; VULCAN PLOW CO. EVANSVILLE, IND. 7.75-inch, very good; and a vehicle wrench? owner marked No. 10 with three open ends, 9-inch, painted black.

232._____ Lot of four malleable implement or farm wrenches: one in green paint that is owner identified as a DEERE G1614, good; VAN BRUNT D380, very good; IHC Z810 pitman with slight twist; and an IHC HD911.

233._____ Lot of four misc. wrenches: square socket that has a square-shanked tapered reamer installed thru the side for use as a handle?; a valve wrench in red paint; a T-handled model in primer marked T5?0; 1 5/16-inch IH 373941 RI, VG.

234. to 239. OPEN.

Fordson, Ford and Ferguson Tractor and Plow Wrenches:

240._____ FORDSON 10-inch S-handle Crescent type wrench with snail on handle, some pitting, good overall.

241._____ Lot of 9 automotive wrenches including several marked FORD.

242._____ Lot of 11 automotive wrenches at least five marked FORD.

243._____ Lot of 11 automotive nut wrenches including several marked FORD.

244._____ Lot of 10 automotive wrenches including several stamped FORD hub cap wrenches a FORD wrench for measuring furrow depth; a KENNEDY drain plug wrench, and several lug wrenches.

245._____ Four adjustable automotive and cycle nut wrenches: 11-inch Billings? marked on bar "11 INCH CANADA"; 9-inch MOORE DROP FORGING CO.; 6.25-inch Billings Tool Co., very good; and an unmarked 4-inch with slightly bent bar.

246._____ Lot of eight FORD wrenches, from the top down: 5-Z-204 with 2-inch open end, very good; 5-Z-209 with offset 5/8 open end; 01A-17017B M38, very good; M-01A-17017B with mild pitting; 01A17017B 91, very good; 01A17017B 64 with one end turned 90 degrees to handle, very good; 01A-17017B 70, very good; and a sawed off lug wrench M-40-17017 open end.

247._____ Lot of nine lug wrenches, six marked FORD, one BARCALO BUFFALO; and two unmarked.

248._____ Lot of three FORD tools including a nice starter crank?, with the Ford script lettering; a pitted valve tool; and a nice offset square socket marked FORD 5-Z-156.

249._____ Lot of twelve lug wrenches: nine marked FORD, one BARCALO BUFFALO; one DIAMOND DROP FORGED DULUTH MINN; and one unmarked.

Self Adjusting Nut and Pipe Wrenches:

250._____ Pair of wrenches: ERIE TOOL WORKS AUTO NO. 14 with bent handle; and a 12-inch brass PHILA VALVE CO. 2830, VG.

251._____ INSTANT-GRIP WESTERN GERMANY 12-inch self-tightening side jaw nut wrench, VG.

252._____ Two Craft roller jaw adjustable pipe wrenches 14 and 18-inch, both VG.

253._____ Two pipe wrenches: Unusual SMITH PIPE WRENCH with two independent swinging jaws, complete and very good; and a one hander, complete and VG.

254._____ Hayward Patent (U.S. No. 1,077,343) 11-inch self-adjusting wrench, made on a patent issued Nov. 4, 1913 to Hubert E. Hayward of Aldrich, MO. It was manufactured by the Hayward Wrench Co. of St. Louis, MO, this example is complete and fine.

255._____ Unusual WALWORTH MFG. CO. quick-adjust pipe wrench with wooden handle, complete and VG.

256._____ Two wrenches: SHEFFY PATENT (U.S. No. 553,362) No. 1 self-adjusting pipe wrench, made on a patent issued January 21, 1896 to Jay K. Sheffy of Chicago, Illinois, this one has some light pitting around the logo on one side and a good sized chip from end of the fixed jaw, good overall; and a 4564-2 WALDEN WORCESTER Ford brake and reverse band only ratchet wrench, very good overall.

Alligator Type Wrenches:

257._____ Lot of five double ended alligator wrenches including a 7.5-inch hand forged model; a BONEY VIXEN wtih thread chasers in the handle, fine; a J.H. WILLIAMS ALWAYS READY 2, very good; W&B NO. 1 with fine nickel plating; and fine VAUGHAN & BUSHNELL BOLT WRENCH with eagle logo, having thread chasers in the handle.

258._____ Lot of nine double ended alligator wrenches: unknown make 9.5-inch; HAWKEYE WRENCH CO. CROCODILE with thread chasers: unknown make with 1906 patent date; another HAWKEY WRENCH CO. THE HAWKEYE; K&B CO. SAXON with thread chasers in handle; another slightly different K&B CO. SAXON with thread chasers in handle; THE KILBORN & BISHOP CO. SAXON with thread chasers; a stamped-steel S&T WRENCH with thread chasers; and a PAT. 720,554 with light pitting.

259._____ Lot of six alligator wrenches: 12.75-inch double ended model that looks Wmemade; 12.5-inch WHITMAN &BARNES MFG. No. 2 1/2 BULLDOG with light rust; unknown 12.5-inch model with notch in end of handle; W&B 10-inch TWIN, light pitting; 9-inch VAUGHAN &BUSHNELL MFG. with pitting; and unknown make 9-inch, VG.

260._____ Lot of seven alligator wrenches: A8MERICAN SAW CO. 9-inch No. 2; W&B 7-inch with light pitting; 7-inch W&B No. 2, very good; 5.25-inch NO. 1; unknown make 5-inch; H.T. CO. 5-inch RIVAL #10, very good; and VAUGHAN &BUSHNELL No. 1, VG.

261._____ Lot of four large alligator wrenches: J.H. WILLIAMS & CO. No. 2 1/2 BULL DOG 12.25-inch, a few spots of pitting, very good; unknown make No. 2 9-inch, very good; No. 2 9-inch by ROEBLING TRENTON N.J., PAT. FEB. 8, 1898, very good; and a V&B 9.25 inch double ended, a spot or two of pitting, VG.

Farm and Implement Type Wrenches (second group)

262._____ AMERICAN HARROW Co. DET. MICH. DD198 in red primer, looks like some pitting under primer, good overall.

263._____ Two JWB silo-type wrenches: 10-inch and 11.5-inch, both VG.

264._____ Two wrenches: Cerniak Patent #2,543,151 combination (barrel) plug and agitator crank, used to operate an internal agitator in metal drums used to ship liquid mixtures that would settle or separate during shipment and storage, and to seal the opening providing access to the agitator shaft, very good; and a T-socket wrench marked 0 on one side, owner's ID tag says it's a J.D. TOWER & SONS MENDOTA, ILL, complete and VG.

265._____ Three assorted wrenches: 9.25-inch STAR SPRINKLER CORPORATION PHILADELPHIA, PA USA, very good; 10-inch G1014 with one broken jaw; and an unknown make 9-inch, VG.

266._____ Three tools: IDEAL 13-inch tent stake and hammer combination, very good; and two 14-inch automotive lug wrenches, one marked FRANK SUMNER TIRES AND ACCESSORIES CARBONDALE, ILL. VG.

267._____ Pair of IHC P1599 T-shaped wrenches, one is in red paint, very good; the other is flat black and has heavy pitting under paint.

268._____ Lot of McCormick-Deering sales literature: McCORMICK-DEERING Haying Machines paper catalog or magazine featuring numerous photos and catalog cuts of different haying implemnts, was folding in half and is worn on outside of fold; McCORMICK-DEERING TILLAGE TOOLS sales pamphlet, very good; McCormick-Deering Cultivators for ALL ROW CROPS sales pamphlet; and McCORMICK-DEERING FARMALL TRACTOR and EQUIPMENT paper catalog, badly worn at fold; and nice nice McCORMICK-DEERING pocket catalogs, all VG.

269._____ International Harvester IHC All monkey wrench 1E/2E (IHC logo) (IHC part 4E) 12-inch, loop handle variation, handle slightly bent, wrench needs cleaning.

270._____ Lot of 13 assorted little wrenches: PLANET JR. cultivator wrench in red paint, very good; KRAEUTER open end; 4.75-inch 170 malleable; two 4-inch 1893; etc.

271._____ Lot of 15 mostly flat steel wrenches including one with spanner; DELCO AUTO-LIGHT ignition-type; a spoke wrench; etc.

272._____ Lot of eight assorted wrenches: three open end S-handled wrenches, one marked BAY STATE; a straight handled 15/16 - 1-inch open end; HERBRAND open end; hex box; USMC 5-inch malleable; CRANE 4F 5.5-inch, in black paint.

273._____ Five assorted socket wrenches: unknown 7.75-inch with two square sockets in red paint; 9-inch T-handle with three square sockets, in red paint, very good; 7-inch 040272 T-handled hex socket, in red paint, very good; 4.5-inch T-handled single square socket, very good; and a small single hex socket.

274._____ Two handles: one a homemade job with wooden handle for cranking a Victrola?; and another 617A-18 in green paint with wooden handle, has circular opening with set screw, fine.

275._____ Lot: six assorted wrenches and a stove lid lifter; included are two pitted SHARPLES cream separator wrenches; square and hex sockets; etc.

276._____ STERLING M'F'G. Co. 12.25-inch D127 a little light to moderate pitting, VG.

277._____ Three assorted implement wrenches: one is owner IDd as being G.A. KELLY PLOW CO. 9.5-inch, very good overall; J.I. CASE PLOW WORKS 4106 very good; and an owner IDd 8.5-inch No. 12 Griswald Patent 1863, complete and VG.

278._____ Lot of six assorted wrenches: two AIRCO, for gas bottles; SMITH'S N210; etc.

279._____ Lot of nine assorted wrenches including six scythe snath wrenches; BRIDGE TOOL CO. double open end, pitted and in silver paint; etc.

280._____ Four farm wrenches: HE911; unknown 7-inch with gear teeth at one end, and small round poll below open end, some pitting; 1AA (Brown-Manly Plow Co. Malta, Ohio) cultivator wrench; and a PLANET JR. 3 cultivator, VG.

281._____ Five farm or implement wrenches: two vehicle wrenches in primer; an IHC? R197?; pitted and in red paint; and IHC with square socket on end of handle; and a P&O 295 in red paint, with pitting.

282._____ Lot of five malleable farm or implement wrenches: Three vehicle or buggy wrenches, one with offset hex box; an IHC Z710 with pitting; and a unknown model with rust and pitting.

283._____ Lot of three malleable farm or implement wrenches: T-shaped model with three open ends and a square socket, painted black, P&0 3613 in black paint; and a nice T-handle with two square sockets and two open ends.

Automotive Wrenches:

284._____ Lot of 24 assorted automotive socket-type wrenches: RAY 619; BLACKHAWK 4218; BLACKHAWK 4320; BLACKHAWK 4330; L2303; RAY 619; WALDEN X1372A; WALDEN 5810; 934502; RAY 620; WALDEN 5810; etc. All have been painted black. Two or three show pitting, most will clean to VG.

285._____ Lot of 8 FORD 9-inch adjustable AUTO wrenches all with the FORD name in script lettering along with USA on the moveable jaw, several clear coated, and three painted black.

286._____ Lot of assorted automotive socket wrenches:

287._____ Lot of 9 FORD 9-inch adjustable AUTO wrenches all marked on the top jaw, and most made by the MOORE DROP FORGING CO. SPFLD., MASS.

288._____ Lot of 17 stamped steel hub cap wrenches, several marked FORD, and most painted black.

Pipe Wrenches (Second Bunch):

289._____ Stanley 10-inch SW Stillson-Type adjustable pipe wrench, complete and very good overall.

290._____ Lot of five pipe wrenches: 14-inch wooden handled STILLSON, has cracked handle, otherwise very good; 14-inch LARCO, very good; 14-inch DROP FORGED U.S.A., very good; RIDGID 12-inch HEAVY DUTY, very good; and a 10-inch wooden handled STILLSON with cracked handle, good.

291._____ Lot of three pipe wrenches: COCHRAN 10-inch MODEL 1910, very good; TRIMO 8-inch, very good; and a GENUINE STILLSON 8-inch, VG.

292._____ Three 10-inch Stillson-type pipe wrenches: F.E. WELLS & SON; scarce STANLEY SW logo tool box model; and unknown make painted red.

293._____ Five small Stillson-type pipe wrenches: GENUINE STILLSON 8-inch, very good; MADE IN USA DROP FORGED 8-inch, very good; three MADE IN SPAIN, 8-inchers, VG.

294._____ Five small Stillson-type pipe wrenches: two 8-inch MADE IN WEST GERMANY, both very good; ARMSTRONG 8-inch, PAT. 5-27-24, very good; GENUINE STILLSON 8-inch, very good; and a WALWORTH 6-inch, needs cleaning, VG.

295._____ Four small screw-adjust pipe wrenches: THE RIDGE TOOL CO. 6-inch straight handle, very good; 6-inch GENUINE STILLSON in red paint, very good; WALWORTH DEARBORN 6-inch, very mild pitting, good; and RIDGID "HEAVY DUTY" 6-inch, VG.

296._____ Lot of three wrenches with owner markings: MILLER CROW FOOT NO. 9; MILLER CROW FOOT NO. 8; and MILLER CROW FOOT NO. 7; all good.

297._____ Lot of 13 assorted flat steel wrenches: BINKS MFG.; MAYTAG; cream separator; etc.

Quick Adjust Nut and or Pipe Wrenches (Second Group)

298. to 299. OPEN.

300._____ RARE Erastus E. King patent (U.S. No. 430,656) quick adjust nut wrench made by King & Hough of Lees Summit, Missouri on a patent issued June 24, 1890._____ This example has light on the sides from a previous cleaning, has an intact spring and is in fine working condition.

301._____ KWIKSET 14-inch Bjornson Patent (U.S. No. 1,599,399) quick-adjusting pipe wrench, made by the Mechanics Wrench and Tool Company of Marshalltown, Iowa. This one is marked A.G. PIPE WRENCH on one side of the bar, very good overall condition.

Misc. Tractor Wrenches:

302._____ Three wrenches: 12-inch stamped or pressed steel with 1 3/4-inch hex box and 1-inch open end; good; Caterpillar S-702 FOR WATER PUMP NUTS ONLY 10.75-inch, 2 3/4-inch open end, very good; and a 2 3/4-inch open end for hex nuts, owner has written 123481 on it with white grease pencil, VG.

303._____ Lot of 8 assorted farm or implement wrenches: unmarked 9-inch, some pitting, good; B&G PLOW CO. CANTON O., good; Emerson B175A, very good; IHC1059B with IHC circular logo; IHC HD911 with circular IHC logo; Collins Plow Co. 124 with hammer, some pitting; P1198, pitted; and a small 4.5-inch VG.

304._____ Lot of 9 assorted farm or implement wrenches: DEERING 7.5-inch, very good; IHC HD911 with circular IHC logo, good; pitted 6-inch cultivator wrench; (CASE PLOW WKS/MASSEY HARRIS) 2234 7.5-inch, very good; pitted open ended; IHC R172 with circular IHC logo, very good; COLLINS PLOW CO. 124 with hammer, very good; 1AA cultivator wrench; and W.E. ROSEL COL. O. (Columbus, Ohio) 5 IN 1 TOOL PAT. PEN'D, VG.

305._____ Four implement wrenches: two STANDARD 6.25-inch cultivator wrenches, both very good; an N172, 6.25-inch, very good; and an M281 pitman, VG.

306._____ Two implement wrenches: (International?) 116H or HD911, some light pitting, good; and an 8.75-inch with large 1 cast into one end, owner ID says MAYTAG, VG.

307._____ Lot of three wrenches: (DEERE) JD-50 6-inch flat steel, very good; 5.5-inch single ended alligator, painted red, pitted; and a MAYTAG flat steel, VG.

308._____ Lot of four implement or farm wrenches: 12-inch malleable with tilted open end, very good; MOLINE PLOW CO. HX5+ with light to moderate pitting, good; and an EMERSON (later CASE) 10-inch, very good; and a homemade 9-inch made from a file or rasp.

Automotive Wrenches: (Third Group)

309._____ Lot of eight assorted S-handled, open-ended wrenches.

310._____ Four assorted wrenches: 10.5-inch DRIES & KRUMP 1 7/16-inch open end, very good; 5/8 & 11/16 box end; WATER PUMP PACKING NUT spanner; and one marked USE ON SINK STRAINERS Schaible FDRY. CO. CIN'T.O. in red paint.

311._____ Lot of five adjustable nut wrenches; three 9-inch AUTO; a DUNLAP 8-inch AUTO; and a 8-inch SCHOLLER Crescent-type, all VG.

312._____ Lot of eight alligator wrenches including a little 4-inch double ender; AMERICAN SAW; J.H. WILLIAMS; V&B MFG. PAT.; V&B 101 double ender; W&B No. 1 double ender; etc.

313._____ Four misc. wrenches: 12-inch malleable CHICAGO SPEC. MFG. CO. CHICAGO, ILL, with two hex openings and one odd opening in one end; and open circular opening at other; two large 12-inch open ended, one by J.H. WILLIAMS; and a malleable 8.5-inch with some pitting, good.

314._____ Four hub cap wrenches; two flat steel the black painted one is pitted; the other is very good; and two cast; one marked FAIRMOUNT CLEVE with a few spots of light pitting; and a similar one with just a shield logo with a letter inside, some pitting on both sides, good.

315._____ Six hub cap wrenches: one flat steel painted black; four stamped steel, one in black paint; and a cast model painted black, can see pitting under paint.

Box Lots: Monkey Wrenches, etc.:

316._____ Lot of 10 wooden handled monkey wrenches: seven 8 to 8.5-inch models and three 6 to 6.5-inch models by GIRARD, COES and Made Under L.COES license.

317._____ Lot of 10 wooden handled monkey wrenches including seven 8-inch models and three 6-inch.

318._____ Lot of eight 10-inch monkey wrenches, six wooden handles models including COES and PERFECT HANDLE; HSB REVONOC; and two twist handle.

319._____ Lot of three 12-inch monkey wrenches including L. COES; LAMSEN & SESSIONS; one with wire loop handle: one has had the wooden handle replaced with brass; another is a nice Belknap BLUE GRASS model.

320._____ Lot of five 8-inch wooden handled monkey wrenches including: W&B; PS&W; COES; COES WRENCH Co. L. COES Pat.; RUSWIN Perfect Handle-type; GIRARD; etc. A few have rust and will need cleaning.

321._____ Seven 12-inch monkey wrenches; two all-steel BEMIS & CALL with red handle; and PEXTO 12 with green handle, both fine; 12-inch PEXTO 12; and 10-inch BEMIS & CALL with green handle, both fine.

322._____ Lot of 17 assorted J. H. WILLIAMS open ended wrenches including a large S-handle; two spud wrenches; 635G A.L.A.M STD; and a 634.

323._____ Lot of 13 assorted J.H. WILLIAMS open ended wrenches including: two #503; 725; 727; 731A, etc.

324._____ Lot of five socket wrenches: BILLMONT with nested set of sockets inside handle; unknown make with swinging lug wrench at end, very good; early looking spark-plug-type wrench with seven grooves milled into top of socket; BLACKHAWK 4422; and an automobile-type socket with no visible markings.

325._____ Three auto-type sockets and ratchet: brace-type socket wrench with worm gear and shaft for getting nut or bolt started, very good; WALDEN WORCESTER brace type with homemade wooden handle; and a stamped steel reversible ratchet with hex socket, no markings, very nice.

326._____ Lot of seven automobile valve tools: five valve spring compressors and two oscillating valve lapping tools.

327._____ Lot of 13 assorted grease guns and fittings for grease guns.

328._____ Lot of 15 wooden handled monkey wrenches: 12-inch OAK LEAF; 8-inch with stripped threads in lower jaw; 8-inch BRIDGE TOOL CO. ST. LOUIS; 8-inch PS&W; 8-inch PS&W SOLID BAR with bent bar and chipped handle; two 8-inch COES; 10-inch COES; 10-inch TRIMO; two more 8-inch; and four 6-inch including a BRIDGE TOOL CO. ST. LOUIS.

329._____ Lot of 16 mostly FORD automobile wrenches includes four lug wrenches; pliers; ratchet for FORD BRAKES AND REVERSE BANDS; 267 FORD BRAKES; two valve tools; etc.

330._____ Lot of 23 mostly FORD automobile wrenches including pliers; ratchet for FORD BRAKES AND REVERSE BANDS; 617 FORD V8 9/16-inch socket; scarce 10-inch STILLSON pipe wrench marked FORD; 9N17014 with graduated bar, etc.

331._____ Lot of 43 mostly FORD automobile wrenches including four lug wrenches and four pairs of pliers.

332._____ Lot of 13 FORD automobile tools including a valve lifter for MODEL A FORD; pliers; single and double open ended nut wrenches.

333._____ Lot: Paul W. Koch & Co. Chicago, JIFFY CUTTER PAT JUNE 25, '18.

334._____ Lot: Seven automobile wrenches: four hubcap wrenches, one marked 9227; two marked FORD; INDUSTRO 1932 to 1937 PLYMOUTH 6, DODGE 6, DE SOTO 6, CHRYSLER 6; Ford 9-inch adjustable; and a stamped steel FOR-A-FORD 5/8 & 9/16.

335._____ Lot of seven HERBRAND wrenches; four S-handle and three straight.

336._____ Lot of 23 wrenches; 21 are marked FORD; the one on the top left is a HERBRAND lug wrench, and the top right is a small Herbrand S-wrench.

337._____ Lot of 27 assorted wrenches including a PROTO 121BB; two open ended FORD; BLUE POINT; 14 stamped or pressed steel wrenches including a BLACK &DECKER 33901; and a mini alligator.

338._____ Lot of 23 assorted wrenches including two PLANET JR cultivator wenches; CHAMPION S-handle; FORD open end, etc.

339._____ Lot of SNAP ON tools: two combination wrenches; ratchet; pliers; drift pin; and screwdriver.

340._____ Lot of 6 BLUE POINT wrenches and a BLUE POINT marking pen.

341._____ Lot of eight wooden handled monkey wrenches: 12-inch GIRARD WRENCH CO., very good; 10-inch COES-type, very good; 10-inch W&B, very good; 10-inch GIRARD, very good; 8-inch COES with cracked handle; 10-inch COES WRENCH CO.; 10-inch W&B; and a 10-inch PS&W with rust and a bent bar.

342._____ Lot of 12 assorted 9-inch AUTO wrenches: five had FORD name in script lettering along with USA on moveable jaw (one missing adjuster screw); one with FORD in script lettering on top jaw made by BARCALO; four FORD by MOORE DROP FORGING; and two unknown makes.

343._____ Lot of 11 assorted hub cap wrenches, one cast model marked FORD

344._____ Lot of simple socket wrenches and sockets including a PLOMB 1/2-inch universal, 42 pieces in all.

345._____ Lot of two tin snips including a 13.5-inch Q-842 NIAGARA; and a PEXTO No. 15; two special purpose Vise Grip-type tools; a leather working tool; and mystery tool marked ORIGINAL-SEEGER CHROM-VANADIN on handles; all in black paint but the leather tool.

346._____ Lot: two 6-inch nippers, one unmarked, and one C.T. CO. 282-6; a 7-inch pair of CRESCENT TOOL CO. tinsnips; and a small BERNARD? 4-inch end cutter with some light pitting, and a small chip from corner of cutting edge.

347._____ Lot of 15 flat steel wrenches including one marked SARGENT with a spanner on the end; and another marked H34A.

348._____ Three misc. wrenches: J.H. WILLIAMS & CO. No. 1999 MULTI SOCKET dog bone, in silver paint; APPLETON CAT NO. TW-W5075; and a flat steel LC.N. with for hex and two square openings, a spanner and a screwdriver.

349._____ Lot of four buggy or vehicle wrenches: 9-inch in red paint, some pitting; 9-inch in black paint, some pitting; 9-inch 320 PAT.D, very good; and a 6.25-inch in red paint, VG.

350._____ Four implement wrenches: 5-inch buggy or vehicle wrench, has E inside circle logo and faint 4-digit number near open end, very good; same as above sized F103, very good; 8.75-inch owner ID says EMPIRE MFG. CO. KEOKUK, IOWA, very good; and a DELCO Light Plant SPARK-PLUG 2824B GENERATOR DELCO-LIGHT in red paint, VG.

The End.

NOTE: A 10 percent buyer's premium will be charged at this sale.

Sale Managed by Michael J. Urness

Great Planes Trading Co.



Phone 314-497-7884

email: Ratdaddy@

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download