MANUAL BUILDER - Builder 3D Printers

[Pages:31]MANUAL BUILDER

Version 3.02

"We all become builders"

Website link

SPECIFICATIONS

PRINTING Print technology

FDM / FFF Fused Deposition Method

Buildvolume (LxWxH):

Resolution:

Printspeed: Travelspeed: Position accuracy

Nozzle diameter: Filament Operating temp. nozzle ELECTRONICS AC input: Power: Connections:

Solo: 210x220x175 mm (8.27x8.66x6.89 inch)

Dual: 210x220x164 mm (8.27x8.66x6.46 inch)

Big: 210x220x664 mm (8.27x8.66x26.14 inch)

Low quality: Normal quality: High quality:

0.3 - 0.2mm 0.2 - 0.1 mm 0.1 - 0.05 mm

Solo: 10 - 200 mm/s Dual: 10 - 80 mm/s

Solo: 10 - 350 mm/s Dual: 10 - 200 mm/s

X:

10 micron

Y:

12.5 micron

Z:

2.5 micron

0.4 mm

1.75 mm PLA/ PVA / Wood-Bronzfill

Solo: 180 - 250? C Dual: 180 - 250? C

100 ? 240V 3A 50/60Hz 120 W USB, Display Standalone SD card (including)

CAUTION: The Builder warranty is only valid when Builder approved material is used.

BUILDER

PRINTER Dimensions printer (LxWxH):

Weight:

Solo/Dual: 385x370x400 mm (15.16x14.57x15.75 inch)

Big Builder:385x370x900 mm (15.16x14.57x35.43 inch)

Solo / Dual Printer: 15 kg Transport: 18 kg

Big Builder Printer: 25 kg Transport: 32 kg

Color frame:

Red / black

Print platform: Certificate:

Glass bed, option heated bed CE certificate

TEMPERATURE Operating - temp. printer: Storage - temp. printer: SOFTWARE Software Operating systems

File types

15 - 32? C 0 - 35? C

Opensource Repetier (Cura / Kissslicer) Windows, MAC STL / OBJ / AMF / DAE

BUILDER MANUAL

2

CONTENT

SPECIFICATION

HARDWARE

OVERVIEW BUILDER ACCESSOIRES UNBOXING INSTALLING CONTROL MONO-EXTRUDER DUAL-FEED EXTRUDER FILAMENT

PRINT SOFTWARE

PRINT SOFTWARE REPETIER HOST

BUILDER

2

5 6 7 8 9 10-11 12-15 16

PRINTING

INTERFACE LEVELING BED MAINTENANCE TROUBLESHOOT SAVETY INSTRUCTIONS CONTACT INFORMATION

18-19 20-21

23-24 25-26

27 28-29

30 31

BUILDER MANUAL

3

HARDWARE

OVERVIEW BUILDER

Onderdelen:

6

1. USB socket

2. Power socket

3. Control button

4. SD-card slot

5. LCD display

6. Print head

7. Spool holder

8. Clip filament guide

9. Filament guide tube

5

4

3

BUILDER MANUAL

BUILDER

9 8

7

1 2

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES:

LINEAR: ANGULAR:

FINISH:

DEBUR AND BREAK SHARP EDGES

5

DO NOT SCALE DRAWING

ACCESSOIRES

BUILDER

The following parts are included with your Builder 3D printer. Please check if the items below are inside the box. Note: No filament is included. Filament is available in different colors and can be found in our webshop. 3dprinter4u.nl/webshop/.

1x

1x

1x

1x

1x Dual Builder

BUILD PLATE 1x

SPOOL HOLDER 1x

FILAMENT GUIDE TUBE

1x

1x

TAPE

PRESSURE PLUG

POWER CORD

CLIP FILAMENT GUIDE

USB CORD

STEEL WIRE CLEANING NOZZLE

BUILDER MANUAL

6

UNBOXING

1.

2.

4.

5.

7.

8.

BUILDER MANUAL

BUILDER

The product images may be different than the actural product

1. Place the box on a flat surface

2. Open the box and lift up the Builder printer

with both hands. While lifting or moving do not

grab belts, rods or the extruder.

3. Uncut and remove the plastic tiewrap that

strap the axes together. Now remove the foam

3.

by rotating the z-axis (the spindle).

4. Attach the spool holder to the frame of the

Builder by inserting the top of the spool holder

into the frame hole

5. Now press down the spool holder until it

snaps into place.

6. Mount the filament spool onto the spool

holder.

7. Place a piece of tape underneath the clip

filament guide this will prevent the clip from

sliding during printing.

6.

8. Attach the clip filament guide on top of the

Builder.

9. Push the filament guide tube inside the clip

filament guide.

10. Now you can switch on the Builder by

pressing the on/off button wich is located at

the back of the printer.

Note: The Builder can be switched off at any time, it is recommended to only turn off the Builder when it's not in use

9.

7

INSTALLING

BUILDER

Place the Builder on a stable surface.

BUILDER MANUAL

Make sure the power switch is in the Off position. Plug the power cord into the power input of the Builder. Now plug the power cord

of your printer into a grounded outlet.

8

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download