REMOVAL - JustAnswer
REMOVAL
To avoid possible voltage spike damage to PCM, ignition key must be off, and the negative battery cable must be disconnected before unplugging the PCM connectors. Note radio programs.
1. Unbolt the washer bottle filler neck and reposition.
2. Disconnect the 4 PCM electrical connector.
3. Reposition wiring harness out of the way
4. Remove the 3 fasteners from PCM mounting
5. Remove PCM .
[pic]
INSTALLATION
.
1. Install PCM. Tighten bolts
2. Reposition wiring harness.
3. Connect the 4 PCM electrical connector
4. Reposition the washer bottle filler neck and install the bolt.
5. Connect negative battery cable.
6.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.