State of Washington
State of Washington
DEPARTMENT OF GENERAL ADMINISTRATION
Office of State Procurement
Rm. 201 General Administration Building, P.O. Box 41017 ( Olympia, Washington 98504-1017 ( (360) 902-7400
INVITATION FOR BID (IFB)
AMMUNITION
|Contract Number |Prebid Meeting Date & Time |Bid Opening Date & Time |
|10903 |September 25, 2003 – 1:00-3:00 PM |October 7, 2003- 2:00 PM. |
bids must be received& Stamped on or before the opening date & time at this location:
210 11th AVe SW, Rm. 201, General Administration Building Olympia WA 98504-1017
Marie Holm
State Procurement Officer
Phone (360) 902-7436
Fax (360) 586-2426
E-mail Mholm@ga.
For a site map to the Capitol Campus, click .
Driving directions and parking information
Table of Contents
1 ANNOUNCEMENT AND SPECIAL INFORMATION 3
1.1 PUBLIC DISCLOSURE 3
1.2 SCOPE 3
1.3 PRE-BID CONFERENCE 3
2 CHECK LIST 4
3 Bid Submittals 5
3.1 OFFER AND AWARD 5
3.2 BID INFORMATION 6
3.3 REFERENCES 8
4 BID EVALUATION 9
4.1 EVALUATION and AWARD 9
4.2 EVALUATION CONFERENCE 10
4.3 ADDITIONAL COPIES OF IFB 11
5 CONTRACT REQUIREMENTS 11
5.1 RETENTION OF RECORDS 11
5.2 WARRANTY 11
5.3 MATERIALS AND WORKMANSHIP 11
5.4 USAGE REPORTS 11
6 SPECIAL TERMS AND CONDITIONS 12
6.1 DAMAGES 12
6.2 CONTRACTOR PERFORMANCE 12
6.3 PRICING AND ADJUSTMENTS 12
6.4 CONTRACTOR PERFORMANCE 13
6.5 PURCHASING CARD ACCEPTANCE 13
6.6 BIDDER COMPLIANCE 13
6.7 NEW MANUFACTUERS/PRODUCTS ADDED TO CONTRACT 13
6.8 DEALER AUTHORIZATION 13
7 SPECIFICATIONS 14
8 PRICE SHEETS 15
SECTION 8.1 – FEDERAL OR EQUAL BRAND OF HANDGUN AMMUNITION 15
SECTION 8.2 – FEDERAL OR EQUAL BRAND OF RIFLE AMMUNITION 17
SECTION 8.3 – FEDERAL OR EQUAL BRAND OF SHOTGUN AMMUNITION 18
SECTION 8.4 - CCI, SPEER BLAZER OR EQUAL BRAND OF HANDGUN AMMUNITION………….18
SECTION 8.5 – CCI, SPEER, BLAZER OR EQUAL BRAND OF SHOTGUN AMMUNITION 21
SECTION 8.6 – WINCHESTER OR EQUAL BRAND OF HANDGUN AMMUNITION 22
SECTION 8.7 – WINCHESTER OR EQUAL BRAND OF RIFLE AMMUNITION 24
SECTION 8.8 – HORNADY OR EQUAL BRAND OF RIFLE AMMUNITION 25
SECTUIB 8.9 - HORNADY OR EQUAL BRAND OF SHOTGUN AMMUNITION………………………25
SECTION 8.10 – SIMUNITION OR EQUAL MARKING CARTRIDGES 26
ANNOUNCEMENT AND SPECIAL INFORMATION
Bidders are required to read and understand all information contained within this entire bid package. The Competitive Procurement Standards, which are referred to in this bid package are not automatically printed or sent out with this IFB. By responding to this IFB the bidder agrees to read and understand these documents. These documents are available on our website at .
In support of the State’s economic and environmental goals, we encourage you to consider the following elements in responding to our bids. These are not a factor of award (unless otherwise specified in this document):
• Using environmentally preferable products and products that exceed EPA guidelines
• Supporting a diverse supplier pool, including small, minority, and women-owned firms
• Featuring products made or grown in Washington
1 PUBLIC DISCLOSURE
Bid information, including price sheets, will not be available for public disclosure until after award of the contract. At the time of bid opening, only the name of the bidder and time of bid receipt will be read aloud.
2 SCOPE
The purpose of this IFB is to establish a mandatory contract for the purchase of Ammunition, (to include New, Lead, Lead Free, Clean-Fire, Reloadable and Non-reloadable Casing). This contract replaces contract 07097 and 07099.
Purchasers: The primary purchasers will be the Washington State Patrol, Washington State Department of Corrections and the Criminal Justice Training Commission; however this contract will be made available to all state agencies. Based upon contractor’s agreement, the contract will be made available to political subdivisions and non-profit organizations which are members of the State of Washington Purchasing Cooperative (WSPC) and/or State of Oregon Cooperative Purchasing Program (DASCPP/ORCPP).
The estimated usage for purchases over the first two years will be approximately $1,000,000.00. Extensions may be subject to mutual agreement, with the total contract term not to exceed six (6) years.
This IFB may be awarded to one or multiple contractor(s) A Pilot Program may be created to help the State in the development of future specifications. . See Bid Evaluation criteria for more information. Bid evaluation and award criteria can be found in the section entitled BID EVALUATION.
3 PRE-BID CONFERENCE
An optional conference to address contractual requirements will be held at the time and location indicated below. Prospective bidders are encouraged to be present. If changes are required as a result of the conference, written bid amendments will be issued.
Note: Assistance for disabled, blind or hearing-impaired persons who wish to attend is available with pre-arrangement with the Office of State Procurement (OSP). Contact the State Procurement Officer identified on the face page of this document.
|Pre Bid Date: |September 25, 2003 |
|Pre Bid Time: |1:00 to 3:00 PM |
|Pre Bid Location: |Office of State Procurement |
| |210 11th AVE SW GA Building Room 201 |
| |Corner of 11th and Columbia |
| |Olympia Washington 98504-1017 |
CHECK LIST
This checklist is provided for bidder's convenience only and identifies the bid documents that must be submitted with each package. Any bid packages received without these documents may be deemed non-responsive and may not be considered for award.
|Bid submittal entitled: Offer and Award | |
|Bid submittal entitled: Bid Information | |
|Bid submittal entitled: Catalog product information | |
|(To include practical use applications and any qualifying standard/certifications or other certifications) | |
|Bid submittal entitled: Price Sheets | |
|Bid submittal entitled: References | |
|Warranty | |
|Catalogs & Price Sheets | |
|Dealer Authorization | |
|Technical Documentation | |
|One copy of the original Bid | |
|SUBMITTALS AFTER AWARD | |
|Quarterly Usage Reports | |
|Specialized Usage Report by Line Item | |
|Certificate of Insurance | |
Bid Submittals
1 OFFER AND AWARD
Bidders are required to read and understand all information contained within this entire bid package. There are some standard documents, which are referred to in this bid package that are not automatically printed or sent out with this bid. For example, Competitive Procurement Standards (Standard Terms and Conditions, Instructions to Bidders, Definitions), Sales/Service & Subcontractor Report are binding terms of this contract. It is important that you read and understand these documents. These documents are available on our website at . If you do not have Internet access, you may contact the State Procurement Officer to obtain copies of any and all documents contained in this bid package.
STANDARD DEFINITIONS revised 06/02/03
STANDARD INSTRUCTIONS FOR BIDDERS revised 06/02/03
STANDARD TERMS AND CONDITIONS revised 06/02/03
Bidder further offers to furnish materials, equipment or services in compliance with all terms, conditions, and specifications herein including all amendments. Submitting this document with an authorized signature constitutes complete understanding and compliance with the terms and conditions and certifies that all-necessary facilities or personnel are available and established at the time of bid submittal.
|(Company Name) | |(Typed or Printed Name) |
| | | |
|(Address) | |(Title) |
| | | |
|(City) (State) (Zip) | |(Phone No.) |
| | | |
|(Federal Tax Identification Number) | |(Bidder’s Signature) (Date) |
| | | |
|Email | | |
CONTRACT AWARD
(For State of Washington Use Only)
A contract is hereby awarded between the above company and the State of Washington, Office of State Procurement, Purchasing and Contract Administration, to be effective , Year . This is a Partial/Total award for .
Authorized Signatures
| | | | | | | |
|(State Procurement Officer) | |(Date) | |(Purchasing Manager) | |(Date) |
2 BID INFORMATION
Bidder shall complete the following:
1. Prompt Payment Discount % 30 days. Note: Prompt payment discount periods equal to (or greater than) calendar days will receive consideration and bid pricing will be reduced (for evaluation purposes only) by the amount of that discount(s).
1. Purchasing (Credit) Cards accepted Yes ______________ No ______________
(Washington State Purchasing card is VISA)
If yes, please list major brands below:
| | | |
| | | |
| | | |
Payment discount for transactions involving card use: __________% Discount.
2. Authorized Representative:
|Primary Contact-Contract Administration |Alternate Contact - Contract Administration |
|Name: | |Name: | |
|Telephone: | |Telephone: | |
|Fax: | |Fax: | |
|Email: | |Email: | |
|Customer Service/Order Placement |
|Name: | |Name: | |
|Telephone: | |Telephone: | |
|Fax: | |Fax: | |
|Email: | |Email: | |
3. Lead-time: Ammunition will be delivered FOB Destination within 30 calendar days after receipt of order (ARO) or a mutually agreed upon date between purchaser and contractor.
4. State your company’s returned goods policy that will be applicable to this contract. Be sure to address restock charges if any and inbound/outbound freight. (This is for informational purposes and will not be part of the evaluation criteria.)
5. There will be no minimum order requirements during the duration of the contract.
6. Addresses:
|Orders to be sent to: |Billing will be from: |Payment to be sent to: |
| | | | | |
| | | | | |
| | | | | |
7. Federal Tax Identification Number:
8. Firms bidding from California only: Is your firm currently certified as a small business under California Code, Title 2, Section 1896.12? Yes No .
9. Identify any subcontractors who will perform services in fulfillment of contract requirements the nature of services to be performed and anticipated dollar value of each subcontract. Include federal tax Identification (TIN) number for each subcontractor:
| | |$ |Tin: | |
| | |$ |Tin: | |
| | |$ |Tin: | |
CONTRACTOR WAREHOUSE Bidder shall indicate below the warehouse location at which supplies will be stored.
|ADDRESS: | | |PHONE: | |
| | | |CONTACT: | |
| | | |EMAIL: | |
SERVICING: Indicate below the names and addresses of sales representatives and specific territories covered. Bidder’s ability to service state agencies including local sales representation may be a factor in the award. Contractor must provide immediate attention to problem areas as they arise regardless of location. Submit an attached letter if necessary.
|NAME: | | |NAME: | |
|ADDRESS: | | |ADDRESS: | |
| | | | | |
|TERRITORY: | | |TERRITORY: | |
|PHONE: | | |PHONE: | |
3 REFERENCES
To meet minimum requirements, the bidder shall furnish a minimum of three (3) references from large commercial/government accounts for which bidder has delivered goods or services on a contract similar in scope and dollar amount to that described in this IFB. Bidder must supply the company name(s) address, contact person, their title, telephone and email address. In addition, provide a brief summary of the products and services provided and the annual dollars spent.
Prior to award, s references will be checked and verified to determine the bidder’s responsiveness for the lowest responsible bidder. Companies or organizations providing a poor or bad reference may cause the bidder to be rejected for non-responsiveness, at the State’s sole discretion.
|1. |Company Name: | |
| |Address: | |
| |Contact Person: | |
| |Telephone: | |
| |Email: | |
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
|2. |Company Name: | |
| |Address: | |
| |Contact Person: | |
| |Telephone: | |
| |Email | |
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
|3. |Company Name: | |
| |Address: | |
| |Contact Person: | |
| |Telephone: | |
| |Email | |
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
BID EVALUATION
1 EVALUATION and AWARD
Price Sheet Sections 8.1 through 8.5
The contract term worth for the first two years is based on the last two year purchases. Please note usage stated on price sheets 8.1, 8.2 and 8.3 is for Federal brand 9 mm ammunition was purchased by the Washington State Patrol. They are now transitioning to 40 caliber weapons and it is anticipated that the 9 mm ammunition purchases will decrease and the 40 caliber ammunition purchases will increase. WSP still use 9 mm weapons and will continue to purchase some of the ammunition as needed.
Price Sheets Sections 8.1 through 8.5 may be awarded to one or more bidder(s) by line item(s), or section(s), whichever is in the best interest of the State. Consideration may also be given to all other contractual requirements stated herein. Each line will be multiplied by the price per round and extended out. The Extended Price for each line item will be summed. The bidder is required to provide the Rounds per Box and Price per Box, but they are for information purposes only, and not are considered part of the evaluation.
Award will be made to the lowest responsive, responsible bidder(s). The State Procurement Officer reserves the right to award by line item, group of line items or aggregate line items or sections. The State Procurement Officer reserves the right not to award one or more line items or group of line items, if deemed in the best interest of the State.
Price Sheet Sections 8.6 through 8.10
A pilot program may be created to help the State develop future specifications.
Price Sheet Sections 8.6 through 8.10 does not have estimated usage. For the first two years, ammunition may be purchased through a Pilot Program. It is anticipated that these sections could be awarded to those bidders who offer pricing lower, equal to or no more than 10% higher overall than the pricing for Price Sheet Sections 8.1 through 8.5. (The manufacturers/brands listed in Price Sheet Sections 8.1 through 8.5 can not be bid for this section). The line items will be summed and the bidder(s) who has the lowest total for all line items in that section may be awarded that section. Bidder is required to also provide the Rounds per Box and the Price per Box for informational purposes. Please note that consideration may also be given to all other contractual requirements stated herein. The State Procurement Officer reserves the right to award by line item, group of line items or aggregate line items or sections. The State Procurement Officer reserves the right not to award one or more line items, group of line items or establish a Pilot Program, if deemed in the best interest of the State.
The State does not have information as to whether state agencies or other users of the contract purchase these line items listed in price sheet sections 8.6 through 8.10. In the event a Pilot Program is established, the State Procurement Officer will provide a specialized usage form by line item to be tracked by the successful bidder(s). This information will be required to be submitted quarterly.
The Washington State Patrol has agreed to compile ballistic testing for those products listed in price sheet sections 8.6 through 8.10 that are equal to the Federal brand products that are listed on the next page. WSP may also test other ammunition on these price sheets, but are unable to identify them at this time. During the 18th month of the Pilot Program, the State Procurement Officer will work with the WSP to review their Ballistic Testing information for the manufacturers currently in the Pilot Program to see if they are equal to the standard of quality of brands which the state agencies currently use. At the end of the 24 month pilot program, the State Procurement Officer may make modifications to the contract, bid sections of the contract or rebid the contract entirely.
The Washington State Patrol has identified the total percentage amount of ammunition they can commit to purchasing. (The total percentage amount will be divided into however many manufacturers that are on the Pilot Program that is considered equal to the products listed below).
|Product |Rounds |Percentage |
|Federal AE9AP, 124 Grain FMJ |4,000 rounds |10% |
|Federal LE40T3, 165 Grain JHP 40 S&W |78,200 |10% |
|Federal LE223T1, 55Grain, FMJ-BT |21,520 |10% |
|Federal LE132 00, 00 Buck Shot |13,605 |10% |
|American Eagle 165 Grain FMJ 40 S & W |497,600 |25% |
|American Eagle 55 Grain FMJ AE 223 |21,520 |25% |
|American Eagle 124 Grain FMJ 9 MM |5,000 |25% |
|Gold Medal GM308M |5,000 |10% |
|Federal LE308T1 |4,000 |10% |
In addition to submitting pricing on the price sheets, all bidders must provide price lists that are properly identified with the manufacturer and/or distributor’s name and date and shall be standard printed price list and so recognized by the trade. Failure to provide these price lists may cause the bidder to be considered non responsive.
When a price list contains more than one price column, bidder must indicate the price column of which bid is based by marking through those price columns not applicable to submitted bid.
Customer satisfaction in the area of product quality, vendor reliability, and contractors’ administrative responsiveness are important elements of our evaluation and award method which will be evaluated using references. The state reserves the right to pursue vendor’s references in addition to those provided in the vendor’s response proposal.
After the first quarterly report is turned in by the contractor(s), the State Procurement Officer may ask contract users to compile their own Ballistic testing results for the ammunition they are purchasing and this information may be used as at the end of the Pilot Program to help determine what manufacturer brands will remain on the contract or be approved for future contract.
2 EVALUATION CONFERENCE
To aid in the evaluation process, after bid opening, the state may require individual bidders to appear at a date, time and place determined by the state for the purpose of conducting discussions to determine whether both parties have a full and complete understanding of the nature and scope of contractual requirements. In no manner shall such action be construed as negotiations or an indication of the state’s intention to award.
3 ADDITIONAL COPy OF IFB
Copy of Bidders Response: To facilitate administrative review by the state’s evaluation team, bidders are requested to submit one exact copy of their original bid. Bids not complying with the above may be rejected as non-responsive.
CONTRACT REQUIREMENTS
1 RETENTION OF RECORDS
The contractor shall maintain, for at least three years after completion of this contract, all relevant records pertaining to this contract. This shall include, but not be limited to, all records pertaining to actual contract performance from the date of contract award. It shall also include information necessary to document the level of utilization of MWBE’s and other businesses as subcontractors and suppliers in this contract as well as any efforts the contractor makes to increase the participation of MWBE’s. The contractor shall also maintain, for at least three years after completion of this contract, a record of all quotes, bids, estimates, or proposals submitted to the Contractor by all businesses seeking to participate as subcontractors or suppliers in this contract. The State shall have the right to inspect and copy such records. If this contract involves federal funds, Contractor shall comply with all record keeping requirements set forth in any federal rules, regulations, or statutes included or referenced in the contract documents.
2 WARRANTY
Warranty(ies): Bidder will submit a copy of warranty as an attachment to bid and items delivered under this contract will also be accompanied by a copy of the warranty. Unless otherwise specified, warranty period shall be for a minimum period of one (1) year after receipt of materials by the Purchaser. All materials provided shall be new, unused, of the latest model or design and of recent manufacture.
In the event of conflict between contract terms and conditions and warranty submitted, to afford the state maximum benefits, the contract terms and conditions shall prevail.
3 MATERIALS AND WORKMANSHIP
The Contractor shall be required to furnish all materials necessary to perform contractual requirements. Materials and workmanship for this contract shall conform to all codes, regulations and requirements for such specifications contained herein, and the normal uses for which intended. Materials shall be manufactured in accordance with the best commercial practices and standards for this type of equipment.
4 USAGE REPORTS
Usage Reports: The contractor(s) must provide the following report(s) to Office of State Procurement.
Sales and Subcontractor Report
A quarterly Sales and Subcontractor Report (attached) shall be submitted in the format provided by the Office of State Procurement. You can get the report electronically at . Total purchases for each State Agency, University, Community and Technical Colleges must be shown separately. Total purchases for all political subdivisions and non-profit organizations may be summarized as one customer. Additionally, all purchases by the State of Oregon or other purchasers must be reported as an aggregate total.
The report shall include sales information (Section A) and amounts paid to each subcontractor during the reporting period (Section B).
Reports should be rounded to nearest dollar. Contractors will be provided with all necessary sample forms, instructions, and lists. Reports are due thirty (30) days after the end of the calendar quarter, i.e., April 30th, July 31st, October 31st and January 31st.
SPO Required Report:
For Price Sheet 8.1 to 8.5, the State Procurement Officer will provide a specialized report for all contractors to submit sales by line item by all users of contract. This report will be required annually and due (30) days after the end of the fourth quarter or January 31st. This report is needed to help in future IFB design, contract negotiation, or any other SPO determined need.
For Price Sheet 8.6 to 8.10, the State Procurement Officer will provide a specialized report for all contractors to submit sales by line item by all users of contract. This report will be required quarterly. This is a requirement of the Pilot Program.
SPECIAL TERMS AND CONDITIONS
1 DAMAGES
The state has an immediate requirement for the materials specified herein. Bidders are urged to give careful consideration to the state’s requirements and to the manufacturer’s production capabilities when establishing a delivery date(s).
Damages will be assessed in the amount of actual damages incurred by the state as a result of Contractor’s failure to perform herein.
2 CONTRACTOR PERFORMANCE
Cost of Remedying Defects: All defects, indirect and consequential costs of correcting, removing or replacing any or all of the defective materials will be charged against the Contractor.
3 PRICING AND ADJUSTMENTS
Unless otherwise stipulated all bids must include unit prices and extensions where applicable and be otherwise in the format requested.
All bid pricing is to be FOB Destination, freight prepaid and included, for any destination within the State of Washington. If bidder agrees to extend contract pricing to State of Oregon ORCCP members, a percent increase to bid pricing to accommodate additional freight costs to Oregon locations may be indicated in Section IV, Bid Submittals.
All pricing shall include the costs of bid preparation, servicing of accounts, and all contractual requirements. During the contract period, pricing shall remain firm and fixed for the initial twenty four (24) month period of the term of contract indicated in Scope and bidder shall state in bid a guaranteed maximum increase for remaining months in the term of contract. Failure to state a maximum increase in the bid submission shall result in denial of all subsequently proposed increases.
Adjustments in pricing will be considered after firm fixed price period on a pass through basis only. A minimum of 90 calendar days advance written notice of price increase is required which is to be accompanied by sufficient documentation to justify the requested increase. Documentation must be based on United States published indices such as the Producer Price Index. Acceptance will be at the discretion of the State Procurement Officer and shall not produce a higher profit margin than that established on the original contract pricing. Approved price adjustments shall remain unchanged for at least 360 calendar days thereafter.
During the contract period, any price declines at the manufacturer’s level or cost reductions to Contractor shall be reflected in a reduction of the contract price retroactive to Contractor's effective date.
During the term of this contract, should the contractor enter into pricing agreements with other customers providing greater benefits or lower pricing, contractor shall immediately amend the state contract to provide similar pricing to the state if the contract with other customers offers similar usage quantities, and similar conditions impacting pricing. Contractor shall immediately notify the state of any such contracts entered into by contractor.
4 CONTRACTOR PERFORMANCE
General Requirements: The state, in conjunction with purchasers, monitors and maintains records of Contractor performance. Said performance shall be a factor in evaluation and award of this and all future contracts. Purchasers will be provided with product/service performance report forms to forward reports of superior or poor performance to the State Procurement Officer.
5 PURCHASING CARD ACCEPTANCE
In an effort to streamline the purchasing and payment process, the State is encouraging agencies to use the state contracted purchasing card to facilitate small dollar purchases. While at the present time, it is not mandatory that contractors accept credit card purchases, we encourage all state contractors to consider this alternate payment process. Please indicate in Bid Submittals which card(s) you presently accept and payment discount you may offer the state. The current card available for state agency use is a VISA product.
6 BIDDER COMPLIANCE
The State reserves the right to consider the actual level of bidder’s compliance with the requirements specified in this IFB, and to consider a bid responsive if it substantially complies with the state’s intent relative to overall bid requirements and specifications.
7 NEW MANUFACTUERS/PRODUCTS ADDED TO CONTRACT
At the discretion of the State Procurement Officer, additional approved manufacturers/products may be added to this contract through the current contractors at the best available price.
8 DEALER AUTHORIZATION
The bidder, if other than the manufacturer, shall provide a current, dated and signed authorization form from the manufacturer that the bidder is an authorized distributor, dealer or service representative and is authorized to sell the manufacturer’s products. Failure to comply with this requirement may result in bid rejection.
SPECIFICATIONS
Price Sheets 8.1 through 8.5 must be bid by the manufacture/brand listed on the price sheets. No other manufacturer/brand will be accepted. All products delivered against contract shall meet our specifications in its entirety (as specified herein and those not specifically identified herein, but are inherent in the standard of quality). By submission of the bid, the supplier certifies that all items delivered against this contract will be in compliance with our specifications, perform equally to the standard of quality and also have passed the performance standards required by the FBI Ammunition Test Protocol.
All bids shall include catalog general product description, practical use applications and any qualifying standard/certifications, i.e., Small Arms Munitions Manufacturers Institute (SAMMI), National Institute of Justice (NIM), American National Standards Institute (ANSI), American Society for Testing and Materials (ASTM), Occupational Safety and Health Administration (OSHA), or the certification of other institutions, associations, or societies recognized as publishing specification standards as well as product specifications sheets for each line item with the following information:
▪ Caliber
▪ Case
▪ Bullet
▪ Primer
▪ Primer Sealant
▪ Accuracy
▪ Instrumental Velocity
▪ Muzzle Energy
▪ Chamber Pressure
▪ Bullet Pull
For Price Sheets 8.6 through 8.10, bidders may bid the manufacturer/brand listed on the price sheets or submit a bid for a product considered “equal” to those listed in the price sheets. All bidders must submit technical documentation to include Ballistic Testing to validate equality of product bid and have passed the performance standards required by FBI Ammunition Test Protocol. Bids without sufficient documentation to fully support equality, will be considered non-responsive.
All bids shall include catalog general product description, practical use applications and any qualifying standard/certifications, i.e., Small Arms Munitions Manufacturers Institute (SAMMI), National Institute of Justice (NIM), American National Standards Institute (ANSI), American Society for Testing and Materials (ASTM), Occupational Safety and Health Administration (OSHA), or the certification of other institutions, associations, or societies recognized as publishing specification standards as well as product specifications sheets for each line item with the following information:
▪ Caliber
▪ Case
▪ Bullet
▪ Primer
▪ Primer Sealant
▪ Accuracy
▪ Instrumental Velocity
▪ Muzzle Energy
▪ Chamber Pressure
▪ Bullet Pull
PRICE SHEETS
SECTION 8.1 – FEDERAL ONLY HANDGUN AMMUNITION
|No. |Product Name & Code |Caliber |Bullet Style |Primer |Cartridge Case |Rounds per Box |Price per Box |
|1. |Simunition FX |5500432 |9 MM |Red Marking Cartridges |0 |50 |$ |
|2 |Simunition FX |5303700 |9 MM |Blue Marking Cartridges |0 |50 |$ |
|3. |Simunition FX |5307010 |9 MM |Yellow Marking Cartridges |0 |50 |$ |
|4. |Simunition FX |5309080 |9 MM |White Marking Cartridges |0 |50 |$ |
|5. |Simunition FX |5307110 |9 MM |Orange Marking Cartridges |0 |50 |$ |
|6. |Simunition FX |5307070 |9 MM |Green Marking Cartridges |0 |50 |$ |
|7. |Simunition FX |5500152 |38 |Red Marking Cartridge | 0 |100 |$ |
|8. |Simunition FX |5500720 |38 |Blue Marking Cartridge | 0 |100 |$ |
For Section 8.10, there will be no percentage discount available for other items to be purchased. Only the items listed above can be purchased off the contract. The SPO may, at a later date, add additional items as needed by state agencies.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- friends of nra nra foundation
- state of washington
- practice name hipaa compliance manual
- project profile
- i performance improvement projects
- welcome to the human resources web site
- status of inmarsat mtsat iridium rf compatibility
- aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
- communications operating concept and
Related searches
- state of washington business lic
- state of washington auditor s office
- state of washington dept of licensing forms
- state of washington dmv forms
- state of washington garnishment laws
- state of washington department of licensing
- state of washington abandoned property
- state of washington benefits package
- state of washington employee discount
- state of washington education department
- state of washington treasury
- state of washington get program