Adjustable Axle Stops - LazarSmith



INSTALLATION INSTRUCTIONS

Adjustable Axle Stops

1. Remove OEM bump stops.

2. Assemble axle stop base plate (large diameter sleeve) to frame with OEM bolts.

3. Torque OEM bolts to 45 ft-lbs.

4. Assemble OEM bump stop to axle stop bumper plate (small diameter sleeve) with Grade 8 hardware.

5. Torque Grade 8 hardware to 55 ft-lbs.

6. Driver’s side - insert hitch pin through both axle stop base plate & intermediate sleeve in desired position.

7. Repeat Step #6 for passenger side.

8. Driver’s side - insert hitch pin through intermediate sleeve & axle stop bumper plate in desired position.

9. Repeat Step #8 for passenger side.

10. After desired bump stop height over axle is reached, insert hairpin

keepers onto hitch pins.

11. Note: intermediate sleeve can be omitted to allow more axle travel.

12. Note: driver’s & passenger’s side bump stops can be stagger-adjusted to

different heights.

LazarSmith©

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download