Sarix IME - Pelco



Pelco understands that information is critical to success, which is why we are singularly focused on the development of video surveillance and security solutions that provide you the information necessary to make real-time, business-enabling decisions. From the recently introduced VideoXpert video management platform to our industry-leading selection of IP cameras and accessories, Pelco is committed to designing and delivering a broad range of high-quality, IP video security products and systems complemented with an unparalleled level of customer support and services.For additional information, contact: Pelco, Inc.625 W. Alluvial Ave.Fresno, CA 93711 USAPhone: +1 800 289-9100Web: E-mail: sales@ENVIRONMENTAL NETWORK DOME CAMERADIVISION 28 – ELECTRONIC SAFETY AND SECURITY28 20 00 Video Surveillance28 21 00 Surveillance Cameras28 21 13IP Cameras Notes to Specifier:1. Where several alternative parameters or specifications exist, or where, the specifier has the option of inserting text, such choices are presented in <bold text>.2. Explanatory notes and comments are presented in colored text.ENVIRONMENTAL NETWORK DOME CAMERA GENERALSUMMARY Section includes an environmentally-hardened network dome camera. Product – A 2 MP/3 MP/5 MP/4 K network dome camera supporting H.264, H.265, and MJPEG compression to operate from -50 to + 60 degrees Centigrade. 4-hour duration maximum operating temperature 65°C (149°F).Related Requirements27 15 00 Communications Horizontal Cabling27 20 00 Data Communications 28 05 00 Common Work Results for Electronic Safety and Security28 06 20 Schedules for Video Surveillance28 16 15 Access Control Interfaces to Video Surveillance28 23 00 Video Management System28 31 31.15 Intrusion Detection Interfaces to Video Surveillance28 51 15.13 Information Interfaces to Video Surveillance SystemsREFERENCESAbbreviationsAPI – Applications Programming InterfaceAWB - Automatic White BalanceCBR – Constant Bit RateCVBR – Constrained Variable Bit RateDHCP - Dynamic Host Configuration ProtocolDNR – Digital Noise ReductionDNS - Domain Name ServerEAP – Extensible Authentication Protocolfps - frames per secondFTP - File Transfer ProtocolHTTP - Hypertext Transfer ProtocolHTTPS – Secure Hypertext Transfer ProtocolIGMP - Internet Group Management ProtocolIP - Internet ProtocolIR – InfraRed JPEG - Joint Photographic Experts GroupMP - MegapixelMJPEG - Motion JPEGNTCIP – National Transportation Communications for ITS ProtocolNTP - Network Time ProtocolPoE - Power over EthernetQoS – Quality of ServiceRTP - Real-Time Transport ProtocolRTSP - Real-Time Streaming ProtocolSMTP - Simple Mail Transfer ProtocolSNMP – Simple Network Management ProtocolSSL – Secure Sockets LayerTCP - Transmission Control ProtocolUDP - User Datagram ProtocolUPnP – Universal Plug and PlayVBR – Variable Bit RateVMS - Video Management SystemWDR – Wide Dynamic RangeReference StandardsNetworkIEEE802.3 Ethernet Standards802.1x – Port-based authenticationVideoITU H.265ISO / IEC 14496 –10, MPEG-4 Part 10 (ITU H.264)ISO / IEC 10918 – JPEG?NTCIP 1205 – Object Definitions for Closed Circuit Television (CCTV) ControlONVIF – Profile S, Profile G, Profile TEmissionsFCC (Class A) – 47 CFR Part 15CE – EN 55032 (Class A), EN 50130-4, EN 60950-1, EN 60950-22, EN 62368-1ICES-003, Class AEnvironmental ModelsIEC 60529 – Degrees of Protection Provided by Enclosures – IP66, 67, 68DIN 40 050 Part 9 IP69KIK10+ (50J) Impact Resistance / IEC 62262UL 50E – Type 4XNEMA TS2 para 2.2.7 - 2.2.9SUBMITTALSInformational SubmittalsProduct DataManufacturer’s printed or electronic data sheetsManufacturer’s installation and operation manualsWarranty documentationPassword assignment planShop DrawingsCloseout SubmittalsFinal listing of devices and settingsSystem test resultsQUALIFICATIONSManufacturer shall have a minimum of ten years’ experience in producing IP video equipment.Installers shall be trained and authorized by the Manufacturer to install, integrate, test, and commission the system.DELIVERY, STORAGE AND HANDLINGDeliver the camera in the manufacturer’s original, unopened, undamaged container with identification labels intact.Store the camera in a temperature environment protected from mechanical and environmental conditions as designated by the manufacturer.WARRANTY AND SUPPORTManufacturer shall provide a limited 3-year warranty for the product to be free of defects in material and workmanship.END OF SECTION PRODUCTSEQUIPMENTManufacturer: Pelco, Inc.625 W. AlluvialFresno, CA 93711 USAPhone: +1 800 289-99100Web: E-mail: sales@Product Models:2 MPIME238-1ERS, Sarix Enhanced IR Environmental Dome (2.8–8 mm Lens)3 MPIME332-1ERS, Sarix Enhanced IR Environmental Dome (8–20 mm Lens)3 MPIME338-1ERS, Sarix Enhanced IR Environmental Dome (2.8–8 mm Lens)5 MPIME539-1ERS, Sarix Enhanced Environmental IR Dome (4–9 mm Lens)8 MP (4 K)IME832-1ERS, Sarix Enhanced Environmental IR Dome 8 MP/4 K (9–20 mm Lens)8 MP (4 K)IME839-1ERS, Sarix Enhanced Environmental IR Dome 8 MP/4 K (4–9 mm Lens)GENERAL DESCRIPTIONThe environmental dome camera (“Camera)” shall be a fully hardened dome camera capable of operating from –50° to 60°C (–58° to 140°F) with ingress protection ratings of IP66, IP67, IP68, IP69K, Type 4X. 4-hour duration maximum operating temperature 65°C (149°F).The camera shall possess the following primary characteristics:H.265, H.264 Main and High profiles, and MJPEG compression4 K (3840 x 2160), 5 MP (2592 x 1944), 3 MP (2048 x 1536), 2 MP (1920 x 1080) resolutionThree independent IP video streamsElectronic image stabilizationElectronic image rotation Day/night operation with IR cut filterEffective Dynamic Range: up to 130 dB (2 MP and 3 MP models), up to 120 dB (5 MP and 4 K models), measured per IEC 62676Adaptive IR illumination, 850 nm up to 50 mSelectable 3D noise reductionPower options - POE+ IEEE 802.3at, Class 4; 18 ~ 32 VAC; 12 VDC +/-10% Analytics options:camera sabotageregion-based simple motion detectionabandoned objectadaptive motiondirectional motionloitering detectionobject countingobject removalstopped vehicleCapable of advanced analytics (Pelco’s Advanced Analytic Suite powered by deep learning)Multicast capable with unlimited H.264/H.265 viewersUnicast capable with 2 guaranteed and up to 20 simultaneous viewersLocal SD storagevia Micro SD, SDHC or SDXC cardup to 2 TB addressable; 256 GB testableBi-directional audio, full or half duplexAlarm input and outputBuilt-in heaterIntegral watchdog feature to automatically restart the camera in event of malfunctionTraffic shapingLong term bit rate controlVIDEO/CAMERAImaging Device:1/2.8 inch or 1/1.8-inchImager Type: CMOSElectronic Shutter Range: 1/10,000 to 1 secMinimum illumination:Color mode:2 MP (2.8 – 8 mm Lens, f/1.3)0.0125 lux @ 33ms; 0.0012 lux @ 500 ms3 MP (8 – 20 mm Lens, f/1.5)0.0080 lux @ 33ms; 0.008 lux @ 500 ms3 MP (2.8 – 8 mm Lens, f/1.3)0.05 lux @ 33ms; 0.005 lux @ 500 ms5 MP (4 – 9 mm Lens, f/1.5)0.10 lux @ 33ms; 0.00625 lux @ 500 ms4 K (4 – 9 mm Lens, f/1.5)0.10 lux @ 33ms; 0.00625 lux @ 500 ms4 K (9 – 20 mm Lens, f/1.6)0.12 lux @ 33 ms; 0.0075 lux @ 500 msBlack & white mode:2 MP (2.8 – 8 mm Lens, f/1.3)0.0025 lux @ 33ms; 0.0003 lux @ 500 ms; 0 lux with IR3 MP (8 – 20 mm Lens, f/1.5)0.0015 lux @ 33ms; 0.0018 lux @ 500 ms; 0 lux with IR3 MP (2.8 – 8 mm Lens, f/1.3)0.010 lux @ 33ms; 0.001 lux @ 500 ms; 0 lux with IR5 MP (4 – 9 mm Lens, f/1.5)0.05 lux @ 33ms; 0.003125 lux @ 500 ms; 0 lux with IR4 K (4 – 9 mm Lens, f/1.5)0.05 lux @ 33ms; 0.003125 lux @ 500 ms; 0 lux with IR4 K (9 – 20 mm Lens, f/1.6)0.06 lux @ 33 ms; 0.00375 lux @ 500 ms; 0 lux with IRScanning: ProgressiveImage Control SettingsWhite balance range:2,500? to 10,000?K; Selectable Auto/ManualIR Illumination: 850 nm adaptive IR, up to 50 metersPrivacy zone definition:up to 16 configurable windows of window blankingLens:Built-in, varifocalFocal Length:f/1.3, 2.8 ~ 8 mm (2 MP, 3 MP), f/1.5, 8 ~ 20 mm (3 MP), f/1.5, 4 ~ 9 mm (5 MP & 4 K), f/1.6 9 ~ 20 mm (4 K)Zoom:Remote motorizedAuto Iris:P-IrisFocus:Autofocus, motorizedField of view:2 MP (2.8 – 8 mm)3 MP (8 – 20 mm lens)3 MP (2.8 – 8 mm lens) Diagonal136.4? - 47.4?46.5? - 18.8?137.90? - 47.8?Horizontal115.7? - 41.3?36.5? - 15.0?106.0? - 38.2?Vertical62.4? - 23.2?27.0? - 11.3?77.0? - 28.7?5 MP (4 – 9 mm)4 K (4 – 9 mm lens)4 K (9 – 20 mm lens)Diagonal141.8? - 58.4?141.8? - 58.4?58.7? - 25.6?Horizontal116.9? - 50.8?116.9? - 50.8?50.1? - 22.3?Vertical60.7? - 28.5?60.7? - 28.5?27.1? - 16.6?Video:Streams:Up to three simultaneous The second and third streams are variable, based on the setup of the primary pression type:H.265, H.264 High or Main profiles; and MJPEGOrientation modes:Electronic Image Rotation 90, 180, and 270 degrees (Corridor Mode) Flicker Control:Selectable Auto On/Off, 50 Hz or 60 Hz modesAvailable resolutions:2 MP:1920 x 1080 to 512 x 3843 MP:2048 x 1536 to 640 x 3605 MP2592 x 1944 to 512 x 3844 K3840 x 2160 to 512 x 384Signal-to-Noise Ratio>60dBBit rate control options:constant bit rate (CBR)constrained variable bit rate (CVBR) with configurable maximum valueMaximum frame rate: Up to 120 fps at 1080p on the 3MP models, Up to 60 fps at 1080p on all models, up to 30 fps at full resolution with WDR on all modelsONVIF:Profile S, Profile G and Profile T conformantThe camera shall provide two basic and seven enhanced user-configurable behaviors, allowing for the set-up of different scenarios for each behavior.See section 2.02 B 11 for list of supported analyticsThe camera shall employ intelligent compression technology to reduce bandwidth and storage requirements, including a mechanism to reduce I-frames in scenes with little motion.Low resolution JPEG stream for configuration of camera settings.Storage and RecordingLocal SD storagevia Micro SD, SDHC or SDXC cardup to 2 TB addressable; 256 GB testableability to be backed up to alternate media without removal of the SD card from the cameraLocal recording shall commence upon loss of network connectivity, continuously or based upon a pre-programmed schedule.Alarm recording: The camera shall capture selectable 1, 5, or 10 second video clips on camera sabotage, motion detection, or alarm input.Manual Pan Tilt Pan Range: 0 o - 370oTilt Range:-10o - -90oRotate Range:+/- 100?ADDITIONAL FEATURESAlarm:Detection of open or closed alarm state.Input (1): Normally Open or Normally Closed, supervised (3.5 VDC, 35 mA maximum)Output (1):+/- 32 VDC, 150 mA maximumTriggers: Unsupervised mode that detects switch closures (Normally Open and Normally Closed)Audio:Bidirectional Full or half duplexInput: Line level, 3K ohm differential w/ 1V p-p maximum signalOutput: Line level, 600 ohm differential w/1V p-pEncoding: G.711 – A-law / U-lawSystem InformationThe system settings of the camera shall be exportable as a separate file.The camera shall maintain an accessible system WORKConnectivity: 100BASE-TX* /1000Base-T Automatic MDI/MDI-X*Some combinations of high resolution, frame rate, and high numbers of unicast streams, may lead to less desirable results at 100Base-TX.Protocols supportedTransmission Control Protocol (TCP), Internet Protocol (IP) v4 and v6, User Datagram Protocol (UDP)Configuration: Dynamic Host Configuration Protocol (DHCP)Web services: Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS)Network services: Domain Name System (DNS), Network Time Protocol (NTP), Simple Network Management Protocol (SNMP) v2c/v3, Universal Plug and Play (UPnP)Media: Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP)Multicast: Internet Group Management Protocol (IGMP)Notifications: File Transfer Protocol (FTP), Simple Mail Transfer Protocol (SMTP)Security: Secure Sockets Layer (SSL), IEEE 802.1x (EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP and EAP-FAST)Quality of Service (QoS) for Differentiated Services Code Point (DSCP)NTCIP 1205 (National Transportation Communications for Intelligent Transportation System Protocol)ICMP: The?Internet Control Message Protocol?is an?internet?layer protocol used by network devices to diagnose network communication issues.?ARP: The?Address Resolution Protocol?(ARP) is a communication?protocol?used for discovering the link layer address.SecuritySupport IP address filtering whereby users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settingsSupport principle of least privilege with four levels of user access with password protection.Security Access: Password protection, HTTPS, IEEE 802.1X, digest authentication, IP filteringSupport confidentiality—HTTPS uses TLS-based encryption configured for strong cipher suites. Support for either self-signed or external PKI signed digital certificates.UsersUnicast: 2 guaranteed Up to 20 simultaneous users depending on resolution settingsMulticast: Unlimited users H.264/H.265Software Interface: Web browser view and setupINTEGRATION AND INTERFACEPelco: VideoXpert; Endura 2.0 (or later); Digital Sentry 7.3 (or later),Pelco Mobile ApplicationOpen API:Third-party VMS through Pelco API, ONVIF Profile S, Profile G, Profile TCamera Discovery:VX ToolboxFirmware Upgrade:Web UI or VX ToolboxMultilingual User Interface:English, French, German, Italian, Portuguese, Russian, Spanish, Turkish, Korean, Simplified ChineseELECTRICALPower Input:IEEE802.3at PoE+, Class 418 - 32 VAC12 VDC ± 10%Failover – The camera, if powered by both PoE+ and external AC or DC power, shall automatically switch to external power upon loss of network provided power.Maximum Power ConsumptionPoE+16.8 W 24 VAC18.1 W12 VDC20.5 WMECHANICAL AND ENVIRONMENTALConstruction Material: Aluminum; polycarbonate bubbleDome color options:Smoked, clearFinish:White, RAL 9003Impact Resistance:IK10+ (50J)Dimensions (D x H): 16.2 cm (6.4 in) x 12.8 cm (5.1 in) Temperature:Operating: -50°C to 60°C (58°F to 140°F), 4-hour duration maximum operating temperature: 65°C (149°F)Storage:-40°C to 60?C (-40°F to 140?F) Ingress Protection:IP66, IP67, IP68, IP 69K Type 4X Available Mounting Options:Electrical box – direct with adapterPole mountIn-ceiling mountPendant MountCorner mountWall mountParapet wall/roof mountEND OF SECTION EXECUTIONINSTALLERSContractor personnel shall comply with all applicable state and local licensing requirements.PREPARATIONThe network design and configuration shall be verified for compatibility and performance with the camera(s). Network configuration shall be tested and qualified by the Contractor prior to camera installation.Before permanent installation of the system, the Contractor shall test the system in conditions simulating the final installed environment.INSTALLATIONThe contractor shall follow all Manufacturer-published guidance on proper installation, configuration and cyber hardening of the installed cameras.The Contractor shall test the system in conditions simulating the final installed environmentReports:System test resultsSystem network addressing and device settingsSTORAGEProducts shall be stored in an environment where temperature and humidity are in the range specified by the Manufacturer. END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download