Abstract - Atlona® AV Solutions - Commercial & Residential



Product Engineering SpecificationVersion 3.5VersionRelease DateNotes1.02017Initial Release2.42018Added AT-OMNI-111/112/121/1222.6Nov 2018Added AT-UHD-SW-510W/-EU2.8June 2019Added AT-OMNI-512/5212.9July 2019Added AT-OPUS-46M/68M/810M/-RX and AT-OME-EX-KIT3.2March 2020Removed AT-UHD-CLSO-8403.3May 2020Added AT-OME-MS52W3.4Oct 2020Updated OmniStream spec3.5Sept 2021Added AT-WAVE-101Table of Contents TOC \o "1-2" \h \z \u \t "Heading 3,2" 1Abstract PAGEREF _Toc82441532 \h 42Disclaimer PAGEREF _Toc82441533 \h 42.1Manufacture PAGEREF _Toc82441534 \h 42.2Installation, testing, and system’s acceptance PAGEREF _Toc82441535 \h 43Specifications summary PAGEREF _Toc82441536 \h 43.1HDVS-200-TX / PSK Product Specifier PAGEREF _Toc82441537 \h 53.2HDVS-200-TX-WP Product Specifier PAGEREF _Toc82441538 \h 73.3HDVS-200-RX Product Specifier PAGEREF _Toc82441539 \h 93.4HDVS-150-TX Product Specifier PAGEREF _Toc82441540 \h 103.5HDVS-150-TX-WP Product Specifier PAGEREF _Toc82441541 \h 113.6HDVS-150-RX Product Specifier PAGEREF _Toc82441542 \h 123.7AT-HDVS-210H-TX-WP Product Specifier PAGEREF _Toc82441543 \h 133.8AT-HDVS-210U-TX-WP Product Specifier PAGEREF _Toc82441544 \h 143.9UHD-EX-100CE-RX-PSE Product Specifier PAGEREF _Toc82441545 \h 153.10UHD-EX-100CE-TX-PD Product Specifier PAGEREF _Toc82441546 \h 163.11AT-HDVS-300-KIT Product Specifier PAGEREF _Toc82441547 \h 173.12AT-UHD-SW-5000ED Product Specifier PAGEREF _Toc82441548 \h 183.13AT-UHD-SW-52ED Product Specifier PAGEREF _Toc82441549 \h 193.14AT-HD-SC-500 Product Specifier PAGEREF _Toc82441550 \h 203.15AT-UHD-CLSO-601 Product Specifier PAGEREF _Toc82441551 \h 213.16AT-UHD-CLSO-612ED PAGEREF _Toc82441552 \h 223.17AT-UHD-CLSO-824 PAGEREF _Toc82441553 \h 233.18AT-OME-MS42 PAGEREF _Toc82441554 \h 243.19AT-WAVE-101 PAGEREF _Toc82441555 \h 253.20AT-OME-MS52 PAGEREF _Toc82441556 \h 253.21AT-OME-ST31A PAGEREF _Toc82441557 \h 273.22AT-OME-PS62 PAGEREF _Toc82441558 \h 283.23AT-OPUS-810M-Product Specifier PAGEREF _Toc82441559 \h 293.24AT-OPUS-68M-Product Specifier PAGEREF _Toc82441560 \h 303.25AT-OPUS-46M-Product Specifier PAGEREF _Toc82441561 \h 313.26AT-OPUS-RX-Product Specifier PAGEREF _Toc82441562 \h 323.27AT-VGW Product Specifier PAGEREF _Toc82441563 \h 333.28AT-VTP-800-BL/WH-Product Specifier PAGEREF _Toc82441564 \h 343.29AT-VTP-550-BL/WH-Product Specifier PAGEREF _Toc82441565 \h 343.30AT-VCC-RS232-KIT-Product Specifier PAGEREF _Toc82441566 \h 353.31AT-VCC-IR-KIT-Product Specifier PAGEREF _Toc82441567 \h 353.32AT-VCC-RELAY-KIT-Product Specifier PAGEREF _Toc82441568 \h 353.33OmniStream? AT-OMNI-111, AT-OMNI-112, AT-OMNI-121, AT-OMNI-122, AT-OMNI-512, AT-OMNI-521 Product Specifier PAGEREF _Toc82441569 \h 363.33.2Video Encoder and Decoder Specification PAGEREF _Toc82441570 \h 363.33.3Audio Sub System Specifications PAGEREF _Toc82441571 \h 373.33.3.5Embedded Audio Support PAGEREF _Toc82441572 \h 373.33.3.6AES67 Support PAGEREF _Toc82441573 \h 373.33.4System PAGEREF _Toc82441574 \h 383.33.5Hardware PAGEREF _Toc82441575 \h 403.33.6Environmental PAGEREF _Toc82441576 \h 413.34AT-UHD-SW-510W / EU PAGEREF _Toc82441577 \h 423.35AT-OME-EX-KIT PAGEREF _Toc82441578 \h 444Definitions and Abbreviations PAGEREF _Toc82441579 \h 45AbstractThe objective of this document is to serve as an engineering source or Specifier for Altona’s products, to help the designer in their project specification. The document is provided as a convenience to our customers and will require editing and customization to meet the project scope and requirements. Disclaimer Atlona Technologies shall not be liable for any damages arising out of using this guide. To insure accuracy of your design, please contact our design and support team at (800)-536-3976.ManufactureBasis of design subject to compliance with requirements to provide products of Atlona Technologies head quartered at 70 Daggett Drive, San Jose CA 95134. U.S. Office: +1.877.536.3976, or international +1.408.962.0515?Installation, testing, and system’s acceptanceProduct installation, testing, customer training, and system acceptance shall be done by an Atlona Certified Partner/ Engineer. Specifications summaryThe AV system and devices shall meet the following as minimum for product operation:The UHD/4K, and HD Digital Transport System shall operate as a standalone point-to-point system, as well as a part of a larger switching system for delivering local AV content to far end sinksAudio/Video switching and distribution at native resolution without compressionHDMI signal transportAudio signal transportCEC supportRS232 supportHDCP 1.4 or greater supportDeep Color supportEDID pass through and or EDID managementDisplay control supportAuto signal detectionField Firmware upgradableBacked up with 10 years limited product warrantySpecificationHDVS-200-TX / PSK Product SpecifierThe 3X1 switcher / transmitter shall have two HDMI and one VGA inputs, as well as audio on 3.5 mm mini-stereo connector. The transport shall extend HDMI, VGA (including audio), RGBHV, YUV, and Composite, as well as RS-232 and Ethernet over HDBaseT port. The switching shall have input select, as well as display and volume control buttons on the front panel. Device configuration, operation, and maintenance shall be available via software management and Web GUI access. When two or more signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty3X1 HDBaseT Switcher - two HDMI inputs plus a VGA input with 3.5mm audio connectorFront panel input select buttonFront panel display on/off controlFront panel volume controlFront LED indication for PWR, Input source selected, and signal statusVideo resolution support for 4096×2160@24/25/30/50*/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control: Selects active input when sources are connectedAutomatic input selection using video detection technologyEDID management supportCEC support HDCP 1.4 supportPCM 2CH input audioPCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio? for HDMI IN and HDBaseT OUTAudio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 328 ft. (100m)CAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via mini USB CE and FCC certifiedHDVS-200-TX-WP Product SpecifierThe 2X1 switcher/ transmitter shall be able to extend HDMI, VGA (including audio), RGBHV, YUV, and Composite over HDBaseT port. The 2X1 switcher / transmitter shall have input select, as well as display and volume control buttons on the front panel. Device configuration, operation, and maintenance shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty. US, 2-gang Decora-style wall plate?2X1 HDBaseT Switcher - One HDMI input plus a VGA input with 3.5mm audio connectorFront panel input select buttonFront panel display on/off controlFront panel volume controlFront LED indication for PWR and signal statusVideo resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control: Selects active input when sources are connectedAutomatic input selection using video detection technologyEDID management supportCEC support HDCP 1.4 supportPCM 2CH input audioPCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio? for HDMI IN and HDBaseT OUTAudio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 328 ft. (100m)CAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via mini USB Power consumption up 30WCE and FCC certifiedHDVS-200-RX Product SpecifierThe HD Scaling receiver shall accept HDBaseT audio and video Signal, and outputs HDMI, as well as de-embedded balanced audio output. It shall have two RS-232 ports, and contact closure port for screen or display lift control. The scaler receiver shall have automatic display control via CEC or control system, as well as menu and volume adjustment via software management, web GUI, or front panel button control. The HD scaling receiver shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty.HD video scaler with HDMI output and input?resolution controlAutomatic display control - Automatically changes projector power state based on active or standby mode of scaler. Control signals transmitted via IP, RS-232, or CECFront Panel Control for Menu, Auto, and Volume Front LED indication for PWR and signal statusVideo resolution support for 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768,?1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480Dual TCP/IP and RS-232 control Ethernet enabled, HDBaseT extensionContact closure for screen control or display?lift controlAuto Display ControlPower over Ethernet for associated TXYUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthCEC support HDCP 1.4 supportEDID management supportPCM 2Ch, de-embedding analog audio outPCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio? for HDMI OUT and HDBaseT IN Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTransmits IP and AV signals up to 328 ft. (100m)CAT5e/6 @ 1080p up to 100 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via mini USB 48V Input Power CE and FCC certifiedHDVS-150-TX Product SpecifierThe 3X1 switcher / transmitter shall have two HDMI and one VGA inputs, as well as audio on 3.5 connector. The transport shall extend HDMI, VGA (including audio), RGBHV. The switching shall have input select, as well as display control buttons on the front panel. Device configuration, operation, and maintenance shall be available via Web GUI access. When two or more signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K/UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty4K/UHD capability @ 60 Hz with 4:2:0 Chroma subsamplingFull support of 4K/UHD streaming services and playback deviceVideo resolution support for 4096×2160@24/25/30/50/60Hz*, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthSignal bandwidth of 10.2 GbpsCEC Pass throughHDCP 1.4 compliant - Adheres to latest specification for High-bandwidth Digital Content ProtectionPCM 2CH input audioAudio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateCAT5e/6 @ 4K up to 35 metersCAT5e/6 @ 1080p up to 60 metersCAT6a/7 @ 4K up to 40 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Firmware upgradable via mini USB CE and FCC certifiedHDVS-150-TX-WP Product SpecifierThe 2X1 switcher/ transmitter shall be able to extend HDMI, VGA (including audio), RGBHV, YUV, and Composite over HDBaseT port. The 2X1 switcher / transmitter shall have input select, as well as display control on the front panel. Device configuration, operation, and maintenance shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10 years manufacture limited warranty. US, 2-gang Decora-style wall plate?2X1 HDBaseT Switcher - One HDMI input plus a VGA input with 3.5mm audio connectorFront panel input select buttonFront panel display on/off controlFront LED indication for PWR and signal statusVideo resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control: Selects active input when sources are connectedAutomatic input selection using video detection technologyCEC support HDCP 1.4 supportPCM 2CH input audioAudio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTransmits AV signals up to 230 ft. (70m)CAT5e/6 @ 4K up to 35 metersCAT5e/6 @ 1080p up to 60 metersCAT6a/7 @ 4K up to 40 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via mini USB Power consumption up 18.7W (when paired)CE and FCC certifiedHDVS-150-RX Product SpecifierThe HD Scaling receiver shall accept HDBaseT audio and video Signal, and outputs HDMI, as well as de-embedded balanced audio output, and RS-232 port. The HD scaling receiver shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10 years manufacture limited warranty.HD video scaler with HDMI output and input?resolution controlFront Panel Control for Menu setup Front LED indication for PWR and signal statusVideo resolution support for 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768,?1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480Power over Ethernet for associated TXYUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthCEC support HDCP 1.4 supportPCM 2Ch, de-embedding analog audio outMaster Audio for HDMI OUT and HDBaseT IN Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTransmits IP and AV signals up to 328 ft. (100m)CAT5e/6 @ 1080p up to 70 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via mini USB 48 Input Power CE and FCC certifiedAT-HDVS-210H-TX-WP Product SpecifierThe 2X1 switcher/transmitter shall be able to extend 2 HDMI inputs over HDBaseT port. Device configuration, operation, and maintenance, shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10 years manufacture limited warranty. 1. US one-gang enclosure for Decora?-style wallplate openings 2. 2×1 HDBaseT??switcher with HDMI??inputs3 HDBaseT transmitter for AV, power, and control up to 330 feet (100 meters)4. 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling Remotely powered via PoE (Power over Ethernet)Automatic input selection and automatic display controlTCP/IP and RS-232 controlUHD /HD/ SD resolutions 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolutions - 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900,1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600,640×480 YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthCEC support HDCP 2.2 supportPCM 2Ch, de-embedding analog audio outMaster Audio for HDMI OUT and HDBaseT IN Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTransmits IP and AV signals up to 328 ft. (100m)CAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via IP or mini USB CE, FCC certifiedAT-HDVS-210U-TX-WP Product SpecifierThe 2X1 switcher/ transmitter shall be able to extend 2 HDMI inputs over HDBaseT port. Device configuration, operation and, maintenance shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K/UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with a 10-year manufacturer limited warranty. 1. US one-gang enclosure for Decora?-style wallplate openings 2. 2×1 HDBaseT??switcher with HDMI and USB-C?inputs3 HDBaseT transmitter for AV, power, and control up to 330 feet (100 meters)4. 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsamplingRemotely powered via PoE (Power over Ethernet)Automatic input selection and automatic display controlTCP/IP and RS-232 controlUHD /HD/ SD resolutions 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolutions - 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900,1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600,640×480 YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthCEC support HDCP 2.2 supportPCM 2Ch, de-embedding analog audio outMaster Audio for HDMI OUT and HDBaseT IN Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTransmits IP and AV signals up to 328 ft. (100m)CAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via IP or mini USB CE, FCC certifiedUHD-EX-100CE-RX-PSE Product SpecifierThe 4K /UHD Transport System shall be an advanced signal extender system incorporating the following device specifications, and backed up with a 10-year manufacturer limited warranty.4K/UHD capability @ 60 Hz with 4:2:0 Chroma subsamplingFull support of 4K/UHD streaming services and playback deviceVideo resolution support for 4096×2160@24/25/30/50/60Hz*, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthSignal bandwidth of 10.2 GbpsCEC Pass throughHDCP 2.2 compliant - Adheres to latest specification for High-bandwidth Digital Content ProtectionPoE power source – remotely powers a PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Power Sourcing Equipment (PSE)AV, Ethernet, power, and control?over HDBaseT - Receives 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cableExtended distance HDMI extension - Receives HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cableExtends RS-232, CEC, and Ethernet control signalsAudio format support for PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X?Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateCAT5e/6 @ 4K up to 70 meters up to 230 feetCAT6a/7 @ 4K up to 100 meters up to 328 feetCAT5e/6 @ 1080p up to 100 meters up to 328 feetHDMI IN/OUT @ 4K up to 5 meters up to 15 feetHDMI IN/OUT @ 1080p up to 10 meters up to 30 feetField-updatable firmware via Front panel USB portFront panel Power and Link status?LEDs1 inch (25 mm) high?quarter rack-width enclosurePower supply certified for CE, FCC, RoHS, cULus, RCM,CCCUHD-EX-100CE-TX-PD Product SpecifierThe 4K /UHD Transport System shall be an advanced signal extender system incorporating the following device specifications, and backed up with a 10-year manufacturer limited warranty.4K/UHD capability @ 60 Hz with 4:2:0 Chroma subsamplingRemotely powered via PoEVideo resolution support for 4096×2160@24/25/30/50/60Hz*, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthSignal bandwidth of 10.2 GbpsCEC Pass throughHDCP 2.2 compliant - Adheres to latest specification for High-bandwidth Digital Content ProtectionPoE power source – remotely powers a PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Power Sourcing Equipment (PSE)AV, Ethernet, power, and control?over HDBaseT - Receives 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cableExtended distance HDMI extension - Receives HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cableExtends RS-232, CEC, and Ethernet control signalsMulti-channel audio compliant - Supports PCM, Dolby??Digital, Dolby Digital Plus?, Dolby TrueHD, Dolby Atmos?, DTS? Digital Surround?, DTS-HD Master Audio?, and DTS:X?Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateCAT5e/6 @ 4K up to 70 meters up to 230 feetCAT6a/7 @ 4K up to 100 meters up to 328 feetCAT5e/6 @ 1080p up to 100 meters up to 328 feetHDMI IN/OUT @ 4K up to 5 meters up to 15 feetHDMI IN/OUT @ 1080p up to 10 meters up to 30 feetField-updatable firmware via Front panel USB portFront panel Power and Link status?LEDs1 inch (25 mm) high?quarter rack-width enclosurePower supply certified for CE, FCC, RoHS, cULus, RCM, CCAT-HDVS-300-KIT Product SpecifierThe Soft Codec Conferencing System shall have ability to provide AV switching, USB and HDMI extension, plus system control using PC-based codecs such as Skype, WebEx, and Go ToMeeting. The system shall have a transmitter and a receiver with five video inputs shared between both devices for HDMI, DisplayPort, and analog video signals. The transmitter and receiver will have three USB type B connectors for host computers, in addition to two USB hubs on each of the transmitter and receiver. The system must be able to support 4k/UHD sources and displays. The following device specifications shall be backed up with a 10-year manufacturer limited warranty.Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control: Selects active input when sources are connectedAutomatic input selection using video detection technologyEDID management supportCEC support HDCP 1.4 supportPCM 2CH input audioAudio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 328 ft. (100m)CAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via mini USB Power consumption up 24WCE and FCC certifiedPower supply certified for CE, FCC, RoHS, cULus, RCM, CCCAT-UHD-SW-5000ED Product SpecifierThe 5X1 4K/UHD switcher shall have two HDBaseT inputs, three HDMI?inputs, mirrored HDMI and HDBaseT outputs, balanced audio outputs, automatic input selection, and automatic display control capability. It shall transmit AV signals along with Ethernet, power, and control over a single cable to displays up to 330 feet (100 meters). For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control using Consumer Electronics Control (CEC)*, IP and RS-232Automatic input selection using video detection technologyEDID management supportCEC support HDCP Switchable- Compliant / non-compliant - 1.4 supportPCM 2CH input audioAudio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X? Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 330 ft. (100m)CAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP-Management System softwareFirmware upgradable via mini USB Power consumption up 24WCE and FCC certifiedPower supply certified for CE, FCC, Level VI, RoHS, cULus, RCM, CCCAT-UHD-SW-52ED Product SpecifierThe 5X1 4K/UHD switcher shall have five HDMI inputs, with mirrored HDBaseT and HDMI outputs, balanced analog audio outputs, automatic input selection, and automatic display control capability. It shall transmit AV signals along with Ethernet, power, and control over a single cable to displays up to 330 feet (100 meters). For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty. Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control using Consumer Electronics Control (CEC)*, IP and RS-232Automatic input selection using video detection technologyEDID management supportCEC support HDCP Switchable- Compliant / non-compliant - 1.4 supportPCM 2CH input audioAudio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X?Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 330 ft. (100m)CAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support Compatible with IP- Management System softwareFirmware upgradable via mini USB Power consumption up 22WCE and FCC certifiedPower supply certified for CE, FCC, cULus, RCMAT-HD-SC-500 Product SpecifierThe 3x1 switcher scaler will have two HDMI inputs, VGA, as well as analog audio inputs for embedding onto HDMI output. The switcher scaler shall have Automatic display control using CEC, IP and RS-232, as well as Automatic input selection using video detection technology. The switcher scaler Shall be controlled via TCP.IP, RS-232. It will have ability to adjust volume control, input selection, and turning display power ON /OFF from the front panel. For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.Video resolution support for up to 1920 x 1200 including 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800, 1280×768, 1152×864, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control using Consumer Electronics Control (CEC)*, IP and RS-232Automatic input selection using video detection technologyEDID management supportHDCP Switchable- Compliant / non-compliant - 1.4 supportPCM 2CH input audioAudio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherHDMI IN/OUT @ 1080p up to 10 meters / 30 feetSignal bandwidth of 6.75 GbpsWeb GUI setup, management and support AT-UHD-CLSO-601 Product SpecifierThe UHD/ 4K multi-format switcher shall have four HDMI inputs, two multi-function analog inputs, and a mirrored HDMI, and HDBaseT output with a built-in 4K scaler. It will have Automatic display control using CEC, IP and RS-232, as well as Automatic input selection using video detection technology. The switcher Shall be controlled via TCP.IP, RS-232. For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480Composite / S-Video formats NTSC, NTSC4, PAL, PAL-M, PAL-N, SECAMAutomatic display control using Consumer Electronics Control (CEC)*, IP and RS-232Automatic input selection using video detection technologyEDID management supportHDCP Switchable- Compliant / non-compliant - 1.4 supportPCM 2CH input audioTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionCAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support AT-UHD-CLSO-612EDThe UHD/ 4K multi-format switcher shall have 2HDMI inputs, two HDBaseT inputs, two multi-function analog inputs, a mirrored HDMI, and HDBaseT output with a built-in 4K scaler. It will have Automatic display control using CEC, IP and RS-232, as well as Automatic input selection using video detection technology. The switcher Shall be controlled via TCP.IP, RS-232. For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV, RGB Color Space4:4:4, 4:2:2 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control using Consumer Electronics Control (CEC)*, IP and RS-232Automatic input selection using video detection technologyEDID management supportHDCP Switchable- Compliant / non-compliant - 1.4 supportPCM 2CH input audioAudio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X? Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionCAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and supportAT-UHD-CLSO-824The UHD/ 4K multi-format switcher shall have four HDMI inputs, three HDBaseT inputs, one multi-function analog inputs, two HDBaseT outputs as well as two HDMI mirrored outputs. It will have an audio output mixer, as well as Ethernet and RS-232 and IR HDBaseT insertion. The switcher shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV, RGB Color Space4:4:4, 4:2:2 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthEDID management supportHDCP Switchable- Compliant / non-compliant - 1.4 supportPCM 2CH input audioAudio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X? Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUp to 24-bit rateTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionCAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 10.2 GbpsWeb GUI setup, management and support AT-OME-MS42The 5x2 4K/UHD HDBaseT switcher shall have four inputs including USB-C, 2x HDMI and DisplayPort as well as an HDBaseT and HDMI output. The HDBaseT switcher shall have three USB 2.0 host ports with one via USB-C, balanced analog audio outputs, automatic input selection and automatic display control capability via CEC, RS-232 or IP. It shall transmit AV signals along with Ethernet, power, USB 2.0 and control over a single cable to a receiver up to 330 feet (100 meters). For long term protection investment, the following product and specification shall support a 10-year manufacturer limited warranty.Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control: Selects active input when sources are connectedAutomatic input selection using video detection technologyEDID management supportCEC supportHDMI 2.0 supportHDCP 2.2 supportAudio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 328 ft. (100m)Web GUI setup, management and supportCE and FCC certifiedPower supply certified for CE, FCC, RoHS, cULus, RCM, CCCUSB 2.0 Host switching and extensionUp to 60W of power provided over USB-CUSB 2.0 data rate over HDbaseT up to 120 MbpsAT-WAVE-101The Wireless BYOD receiver shall have the ability to receive up to four (4) wireless streams simultaneously from either Apple Airplay, Google Cast and/or Miracast. The Wireless BYOD receiver shall also allow for the playback of local image and video content and YouTube videos. The device shall have the ability to stream the HDMI output to YouTube live for remote viewing of the content. The Wireless BYOD receiver shall have the ability to control a connected Display either via IP (TCP) or with an optional USB-to-RS232 cable. Additional feature requirements include:The Wireless BYOD receiver shall have the ability to create a secure wireless access point for which BYOD devices can connect.The Wireless BYOD receiver shall have the ability to connect to an existing wireless access point for which BYOD devices can connect.The Wireless BYOD receiver shall have the ability to support multiple simultaneous networks at the same time.The Wireless BYOD receiver shall have the ability to Firewall IP traffic between the devices wireless access point the and wired networkThe Wireless BYOD receiver shall have the ability to provide a dedicated end user webpage for managing content on the system, initiating a live stream to Youtube, changing the layout and managing the volume. The Wireless BYOD receiver shall have the ability to control a display based on time of day and day of week via IP or an optional USB-to-RS232 cable.The Wireless BYOD receiver shall have options to customize the Welcome screen on the HDMI output.The Wireless BYOD receiver shall have the ability to detect the device and browser type of the client connected to the device’s webserver. Providing more accurate instructions on how to wireless stream from said device.The Wireless BYOD receiver shall have the ability to analyze all active content and arrange the content optimally on the HDMI output.The Wireless BYOD receiver shall have the ability to output 4k60 video.AT-OME-MS52The 5x2 4K/UHD HDBaseT switcher shall have four physical inputs including USB-C, 2x HDMI and DisplayPort as well as the ability to receive wireless streams via Apple Airplay, Google Cast and Miracast. The 5x2 HDBaseT switcher shall have two outputs consisting of one HDBaseT and HDMI output. The HDBaseT switcher shall have three USB 2.0 host ports with one via USB-C, balanced analog audio outputs, automatic input selection and automatic display control capability via CEC, RS-232 or IP. It shall transmit AV signals along with Ethernet, power, USB 2.0 and control over a single cable to a receiver up to 330 feet (100 meters). For long term protection investment, the following product and specification shall support a 10-year manufacturer limited warranty.The switch shall have the ability to create a secure wireless access point for which BYOD devices can connect.The switch shall have the ability to create a wireless bridge to another available wireless access point that is in range.The switch shall have the ability to create a custom splash screen via image upload or HTML.Mirrored HDBaseTTM?and HDMI outputsMatrixed HDBaseTTM and HDMI outputs Wireless AV gateway for iOS?, Android?, Mac?, Chromebook?, and Windows devices 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling, plus support for 4K/60 4:4:4 and HDR formats on local ports (HDMI, USB-C, and DisplayPort), HDCP 2.2 compliant Automatic input selection and automatic display control Automated system on/off functionality including display control via scheduling (time of day, day of week)Built-in support for occupancy senor triggering for system on/off including display control.USB-C port supports device charging for laptops, tablets, and smartphonesIt will have an audio output switcher, as well as audio embedding and de-embedding The switcher shall be controlled via TCP/IP, RS-232 and JSON over REST.For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.Supported video resolutions: 4096×2160@60/30/25/24Hz*, 3840×2160@60/30/25/24Hz*, 1080p@60/59.9/50/30/29.97/25/24/23.98Hz, 1080i@60/59.94/50Hz, 720p@60/59.94/50Hz, 576p@50Hz, 576i@50Hz, 480p@60/59.96Hz, 480i@60Hz, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1440×900, 1400×1050, 1280×1024, 1280×800, 1366×768, 1360×768, 1152×864, 1024×768, 800×600, 640×480Color space - YUV, RGBChroma Subsampling - 4:4:4, 4:2:2, 4:2:0HDR ? - HDR10 and Dolby? Vision? @ 60Hz on local HDMI outputUSB-C Up to 4K/UHD @ 60Hz for devices supporting USB-C Alternate Mode video outputWireless: Up to 1080p @ 30Hz 4:2:0; dependent on wireless signal qualityAudio Pass Through formats: PCM, Dolby? Digital, Dolby Digital Plus?, Dolby TrueHD, Dolby Atmos?, DTS? Digital Surround?, DTS-HD Master Audio?, and DTS:X?Analog Input - Unbalanced 2-channel, 3.5 mmAnalog Output - Balanced / unbalanced 2-channel, 5-pin captive screwSample Rate - 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzBit Rate - 24-bitSignal bandwidth – 18 GbpsCEC Support on HDBaseT and HDMI outputsHDCP 2.2 compliantUSB Ports: USB Type C: USB-C for AV input (Alternate Mode), USB 2.0 Type A for Wi-Fi? antenna modules (3 ports)USB-C Power - Up to 60 W / 3 A at 20 VUSB-C Device Charging Capability - Up to 20 V, 3 A Output: 60 W @ 20 V, 36 W @ 12 V, 15 W @ 5 VEthernet Port: 1x RJ45Communication and discovery protocols - HTTP, HTTPS, Telnet, SSH, TCP/IP, mDNSEthernet speed - 10/100 MbpsIP addressing - DHCP, staticWi-Fi - EEE 802.11n/ac 2.5 GHz / 5 GHzWi-Fi Protocols - WEP, WPA, PSK, WPA2 PSK, WPA Enterprise, WPA2 EnterpriseWifi dongles – 2x Antennas providedRS-232 – 1x Bidirectional, 3-pin captive screwRelay - 3-pin captive screw, normally open (NO), with adjustable Toggle and Pulse modes with Electrical rating: 48 V @ 1 ATrigger - 4-pin captive screw, Electrical rating: 30 V @ 1 A (max.)Device Certification - CE, FCC, ULAT-OME-ST31AThe 3x2 4K/UHD HDBaseT switcher shall have 3 inputs including USB-C and two HDMI as well as a mirrored HDBaseT and scaler HDMI output. The switcher shall have balanced audio output, automatic input selection and automatic display control via CEC, RS-232 or IP. The switcher shall transmit AV signals along with Ethernet and control over a single cable to a receiver up to 330 feet (100 meters). For long term protection investment, the following product and specification shall support a 10-year manufacturer limited warranty.Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440× 900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4K Downscaling on HDMI output4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthAutomatic display control: Selects active input when sources are connectedAutomatic input selection using video detection technologyEDID management supportCEC supportHDMI 2.0 supportHDCP 2.2 supportAudio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 328 ft. (100m)Web GUI setup, management and supportCE and FCC certifiedPower supply certified for CE, FCC, RoHS, cULus, RCM, CCCAT-OME-PS62The 6x2 4K/UHD HDBaseT matrix switcher shall have two HDBaseT inputs, three HDMI and one USB-C input as well as a HDBaseT and HDMI output. The HDBaseT matrix shall have three USB 2.0 host ports with one via USB-C, two balanced audio inputs, one mic/line input and two balanced audio outputs. While in mirrored mode, the switcher shall support automatic input selection and automatic display control via CEC, RS-232 or IP. The matrix shall transmit AV signals along with Ethernet, power, USB and control over a single cable to a receiver up to 330 feet (100 meters). For long term protection investment, the following product and specification shall support a 10-year manufacturer limited warranty. Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color Depth4K Downscaling on HDMI outputAutomatic display control: Selects active input when sources are connectedAutomatic input selection using video detection technologyEDID management supportCEC supportHDMI 2.0 supportHDCP 2.2 supportAudio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionTransmits IP and AV signals up to 328 ft. (100m)Web GUI setup, management and supportCE and FCC certifiedPower supply certified for CE, FCC, RoHS, cULus, RCM, CCCUSB 2.0 Host switching and extensionUp to 60W of power provided over USB-CUSB data rate over HDbaseT up to 120 MbpsTwo USB-B and one USB-C Host port.Two USB-A peripheral ports.AT-OPUS-810M-Product SpecifierThe 8x10 4K/UHD/HDR HDBaseT matrix switcher shall have eight HDMI inputs, with 8 HDBaseT and 2 HDMI matrix outputs. It will have 2 unbalanced analog audio inputs, 4 Toslink inputs, and return audio from any television output onto any of the 10 unbalanced analog audio outputs. The Matrix shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.Video resolutions supported 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz,720p@50/59.94/60Hz, 576p, 576i, 480p, 480i VESA resolutions supported 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×8001280×768, 1152×768, 1024×768, 800×600YUV, RGB Color spaces supported4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthEDID management supportHDR support HDR10 @ 60Hz and Dolby? Vision? @ 30HzShall support HDCP up to 2.2 Shall Supports HDMI 2.0Analog audio output/input support PCM 2CH Shall support Toslink output/input support PCM 2Ch, Dolby? Digital, DTS? 5.1HDMI IN/OUT HDBaseT out audio support of PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X?Audio sample rates supported 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzAudio bit rate supported 24-bit (max.)Ability to trigger CEC on/off commands to connected displays (displays that support full CEC functions)Shall support fully matrixable analog audio outputs from any HDMI, analog audio, Toslink, or return audio inputIR passthrough from control system into matrix and then to displays and from displays back to matrix and then to sourcesTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionCAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 18 GbpsWeb GUI setup, management and supportFirmware upgradable via ethernet connectionAT-OPUS-68M-Product SpecifierThe 6x8 4K/UHD/HDR HDBaseT matrix switcher shall have six HDMI inputs, with 6 HDBaseT and 2 HDMI matrix outputs. It will have 2 unbalanced analog audio inputs, 3 Toslink inputs, and return audio from any television output onto any of the 8 unbalanced analog audio outputs. The Matrix shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.Video resolutions supported 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz,720p@50/59.94/60Hz, 576p, 576i, 480p, 480i VESA resolutions supported 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×8001280×768, 1152×768, 1024×768, 800×600YUV, RGB Color spaces supported4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthEDID management supportHDR support HDR10 @ 60Hz and Dolby? Vision? @ 30HzShall support HDCP up to 2.2 Shall Supports HDMI 2.0Analog audio output/input support PCM 2CH Shall support Toslink output/input support PCM 2Ch, Dolby? Digital, DTS? 5.1HDMI IN/OUT HDBaseT out audio support of PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X?Audio sample rates supported 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzAudio bit rate supported 24-bit (max.)Ability to trigger CEC on/off commands to connected displays (displays that support full CEC functions)Shall support fully matrixable analog audio outputs from any HDMI, analog audio, Toslink, or return audio inputIR passthrough from control system into matrix and then to displays and from displays back to matrix and then to sourcesTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionCAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 18 GbpsWeb GUI setup, management and supportFirmware upgradable via ethernet connectionAT-OPUS-46M-Product SpecifierThe 6x8 4K/UHD/HDR HDBaseT matrix switcher shall have four HDMI inputs, with 4 HDBaseT and 2 HDMI matrix outputs. It will have 2 unbalanced analog audio inputs, 2 Toslink inputs, and return audio from any television output onto any of the 6 unbalanced analog audio outputs. The Matrix shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.Video resolutions supported 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz,720p@50/59.94/60Hz, 576p, 576i, 480p, 480i VESA resolutions supported 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×8001280×768, 1152×768, 1024×768, 800×600YUV, RGB Color spaces supported4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthEDID management supportHDR support HDR10 @ 60Hz and Dolby? Vision? @ 30HzShall support HDCP up to 2.2 Shall Supports HDMI 2.0Analog audio output/input support PCM 2CH Shall support Toslink output/input support PCM 2Ch, Dolby? Digital, DTS? 5.1HDMI IN/OUT HDBaseT out audio support of PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X?Audio sample rates supported 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzAudio bit rate supported 24-bit (max.)Ability to trigger CEC on/off commands to connected displays (displays that support full CEC functions)Shall support fully matrixable analog audio outputs from any HDMI, analog audio, Toslink, or return audio inputIR passthrough from control system into matrix and then to displays and from displays back to matrix and then to sourcesTCP/IP and RS-232 control of switcherEthernet enabled, HDBaseT extensionCAT5e/6 @ 4K up to 70 metersCAT5e/6 @ 1080p up to 100 metersCAT6a/7 @ 4K up to 100 metersHDMI IN/OUT @ 4K up to 5 metersHDMI IN/OUT @ 1080p up to 10 metersSignal bandwidth of 18 GbpsWeb GUI setup, management and supportFirmware upgradable via ethernet connectionAT-OPUS-RX-Product SpecifierThe 4K /UHD/HDR Transport System shall be an advanced signal receiver used in conjunction with any OPUS matrix system, incorporating the following device specifications and backed up with a 10-year manufacturer limited warranty.Video resolutions supported 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz,720p@50/59.94/60Hz, 576p, 576i, 480p, 480i VESA resolutions supported 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×8001280×768, 1152×768, 1024×768, 800×600YUV, RGB Color spaces supported4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthEDID passthrough supportHDR support HDR10 @ 60Hz and Dolby? Vision? @ 30HzHDCP up to 2.2 supportedSupports HDMI 2.0AV, Ethernet, power, and control?over HDBaseT - Receives 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cableToslink input support PCM 2Ch, Dolby? Digital, DTS? 5.1HDMI output audio support of PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby? Digital, DTS? 5.1, Dolby Digital Plus?, Dolby TrueHD, DTS-HD Master Audio?, Dolby Atmos?, DTS:X?Audio sample rates supported 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzAudio bit rate supported 24-bit (max.)IR passthrough from control system into matrix and then to display via the RX and from RX back to matrix and then to sourceEthernet enabled, HDBaseT extensionRemotely powered via PoEPoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Powered Device (PD)Front panel Power and Link status?LEDsCEC Pass throughCAT5e/6 @ 4K up to 70 meters HDBaseT inputCAT5e/6 @ 1080p up to 100 meters HDBaseT inputCAT6a/7 @ 4K up to 100 meters HDBaseT inputHDMI OUT @ 4K up to 5 meters HDBaseT inputHDMI OUT @ 1080p up to 10 metersSignal bandwidth of 18 GbpsFirmware upgradable via HDBaseT connection to MatrixAT-VGW Product SpecifierThe Velocity Control Gateway shall be the AV control processor for the Velocity Control System. It shall serve and control of up to 3 or 10 rooms per gateway including Atlona devices and third-party AV devices, dedicated Velocity touchpads, and BYOD control interfaces. It shall have dual Ethernet ports for isolating a dedicated AV LAN from the facility or corporate network. It will be setup and managed via any web browser for any OS platform. It shall support redundancy when two gateways are configured to work in such a fashion. Uses Two Network Interface Controllers (NIC)Supports the following network standards and protocols DHCP, HTTP, HTTPS, SFTP, SMTP, SNMP, SSH, TCP, UDP, IEEE 802.1xSupports Ethernet speeds of 10/100/1000 MbpsShall support the following Network addressing: DHCP and staticHDMI out to support splash screen with IP and firmware informationGateway firmware shall be updated via web-GUI, drag and drop functionalitySupports role-based features and managementUses LS 1.2, ECDHE_RSA with P-256, AES_128_GCM, HTTPS security.Ability to manage and control the gateway via cloud access with the appropriate license Shall include built-in device management for configuration and firmware updatesShall support integrated scheduling through Office 365 and Google G SuiteAdditional scheduling panels shall show the room schedule and allow for ad-hoc room bookingFunctionality and control shall be configured through an intuitive GUIThe control solution shall support he ability to create and customize the user touch panel control pagesConfiguration shall support room triggers, variables, and conditions that allow for flexibility in system functionality and event-based operationAT-VTP-800-BL/WH-Product SpecifierThe VTP-800, Velocity 8-inch touch panel shall act as a control interface for the Velocity Control System. It shall work in conjunction with the VGW-HW to control either Atlona or other third-party AV devices. It shall operate as a PoE PD devices and requires no external power supply. The panel is a Capacitive touch, 8” LCD, 1280 x 800Color depth of the panel 8 bits per channel / 16.7 million colorsShall support Elecro-optical Ambient light sensorUses Advance “time-of-flight” sensor as the proximity sensorPoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Powered Device (PD)Touch screen uses capacitive glass surface that supports multi-touch and gesture interactionsCan be installed into a standard US 2 gang backboxHas a microphone using Digital MEMS (MicroElectro-Mechanical Systems) for future functionalityAT-VTP-550-BL/WH-Product SpecifierThe VTP-550, Velocity 5.5-inch touch panel shall act as a control interface for the Velocity Control System. It shall work in conjunction with the VGW-250 to control either Atlona or other third-party AV devices. It shall operate as a PoE PD devices and requires no external power supply. The panel is a Capacitive touch, 5.5” LCD, 720x1280Color depth of the panel 8 bits per channel / 16.7 million colorsShall support Elecro-optical Ambient light sensorUses Advance “time-of-flight” sensor as the proximity sensorPoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Powered Device (PD)Touch screen uses capacitive glass surface that supports multi-touch and gesture interactionsCan be installed in to a standard US or Euro 1 gang backboxHas a microphone using Digital MEMS (MicroElectro-Mechanical Systems) for future functionalityAT-VCC-RS232-KIT-Product SpecifierThe VCC-RS232 shall act as a TCP to RS-232 command convertor for the Velocity Control System. In conjunction with the VGW-250 control processor, the VCC-RS232 will receive IP commands and convert them to the proper RS-232 commands for the connected devices. The VCC shall operate as a PoE PD device and does not require an external power supply. The VCC can be configured in software as a straight through configuration or null work connectivity via RJ-45, 100/10 Mbps Ethernet ProtocolUnit comes 5-foot (1.5 meter) RS-232 adapter cableUnit comes with DB9 male-male gender changerPoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Powered Device (PD)RS-232 Full support for Tx, Rx, CTS, RTS, DTR, and DTS signals using bidirectional communication with hardware handshakingAT-VCC-IR-KIT-Product SpecifierThe VCC-IR shall act as a TCP to infrared (IR) command convertor for the Velocity Control System. In conjunction with the VGW-250 control processor, the VCC-IR will receive IP commands and convert them to the proper IR commands for up to three connected devices. The VCC-IR shall operate as a PoE PD device and does not require an external power supply. The VCC-IR-KIT shall come with a TriPort connector that will allow up to 3 IR emitters (not included) to be connect to 3 different IR work connectivity via RJ-45, 100/10 Mbps Ethernet ProtocolUnit comes 1ft TriPort IR cableIR output uses 3.5 mm (supports IR emitter, IR blaster, Xantech compatible)PoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Powered Device (PD)Supports IR learning in conjunction with the VGW-250AT-VCC-RELAY-KIT-Product SpecifierThe VCC-RELAY shall act as a TCP to relay trigger or sensor for the Velocity Control System. The VCC-RELAY can be composed of up to 4 independent SPST relays, 2 SPDT relays or 1 DPDT relay. The VCC-RELAY shall also have 4 sensor inputs that can be configured to voltage or contact sensors. The VCC-RELAY shall operate as a PoE PD device and does not require an external power supply.4 Terminal connection relays for SPST configuration. 2 Terminal connection relays for SPDT configuration. 1 Terminal connection relay for DPDT configuration.4 sensor ports that can be can figured as contact closure sensors or voltage sensors4.5-foot (1.4 meter) cablePoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af PoE Powered Device (PD)Voltage: AC/DC voltages ± 3 V to ± 24 V (RMS) supported for the voltage sensor4 x SPST with transient voltage suppression 24 V AC/DC or 0.5 A NO contactOmniStream? AT-OMNI-111, AT-OMNI-112, AT-OMNI-121, AT-OMNI-122, AT-OMNI-512, AT-OMNI-521 Product SpecifierThe primary purpose of the Networked AV system is to support distribution of audio and video over a standard Gigabit Ethernet network.The system shall support distribution of video at resolutions up to 4K60.The system shall support distribution with a latency less than 0.5 video frames (1.5 in Fast Switching Mode)Devices in the system shall be powered using either PoE or external power. The system shall support FEC (forward error correction) up to a 20 x 20 matrix size.The system shall support both physical and logical redundancy. For improved video distribution flexibility and management, the system should support encoder grouping. Grouping encoders allows two or more encoders to feed a single decoder simultaneously. The stream displayed by the decoder is determined using either manual or automatic input-selection, based on the presence of a source signal.For copy protected content, the system shall support content encryption using AES128 encryption and an administrator-configured key. For long term protection investment, the system shall support a 10-year manufacturer limited warranty.Video Encoder and Decoder SpecificationVideo inputs/Outputs InterfacesEncoders and decoders shall be available with either two HDMI connections (AT-OMNI-112, AT-OMNI-512, and AT-OMNI-122) or one HDMI connection (AT-OMNI-111, AT-OMNI-111-WP, AT-OMNI-121, AT-OMNI-521).Scaling & output resolutionsThe decoder shall support video scaling from 800x600 to 3840x2160 at frame rates up to 60 frames-per-secondInput resolution detectionEncoders and decoders shall support automatic input resolution detectionEncoding/Decoding formatsThe system shall use the VC-2 (SMPTE 2042) codec for high-quality, efficient encoding of the video content.DensityEncoders and decoders shall be available with support for up to two video services per device (AT-OMNI-112, AT-OMNI-512 and AT-OMNI-122) or one video service per device (AT-OMNI-111, AT-OMNI-111-WP, AT-ONMI-121 and AT-OMNI-521).VC-2 specificationRate controlEncoders shall support CBR (Constant Bit Rate).Bit RateEncoders shall support configurable bitrates from 15 Mbps to 900 Mbps.Bit depthThe system shall support the following bit depths: 8 bits, 10 bits, 12 bits.Chroma sub-samplingThe system shall support the following4:2:0, 4:2:2, 4:4:4LatencyThe system shall support an end-to-end latency of 0.5 frames in standard operation and 1.5 frames in Fast Switching Mode.HDR SupportThe system shall support HDR10, HLG and DolbyVision? up to 60 frames-per-seconds Video Wall SupportThe system shall support the following video wall capabilities:Video wall sizes up to 16 x 16 screens at resolutions up to 4Kp30Video wall sizes up to 2 x 2 screens at 4Kp60Landscape and portrait display orientation (90?, 180?, and 270? rotation)Precision timing for wall synchronizationBezel correction on four sides of each displayNon-symmetrical bezel correctionBezel correction in pixels and mmFast Switching SupportDecoders shall support fast content switching, regardless of incoming resolution and framerate.*NOTE: *Output can be fixed to 1080p60 or 1080p30 depending on number of decoder channelsAudio Sub System SpecificationsAudio input/outputThe system shall support the following audio input and output capabilities:HDMI audio inputBalanced analog audio output on the decoderAbility to re-embed balanced analog audio input on the decoderAbility to decode audio from a source different from videoPass through and re-embeddingAudio formatsThe system shall support pass-through of the following audio formats:LPCM 2.0, 5.1, 7.1DTS? 5.1, DTS-HD Master Audio?Dolby Digital AC3 2.0, 5.1Dolby Digital Plus? E-AC3 2.0, 5.1, 7.1Dolby TrueHD 2.0, 5.1, 7.1Dolby AtmosAudio densityThe system shall support dual 2-channel balanced analog audio outputs on dual encoders (AT-OMNI-122) and a single 2-channel balanced analog audio output on single encoders (AT-OMNI-121).Audio down mixThe system shall support downmix of incoming LPCM audio to two channel audio.Audio volume controlThe system shall support volume control via a management system.The system shall support audio mute.Embedded Audio SupportThe system shall have support for embedded audio over IP.AES67 SupportThe system shall support the AES67 standard for audio over IP.SystemDecoder redundancy modesThe decoder shall support redundant incoming streams.The decoder shall support of only sending IGMP join requests when a redundancy switch occurs.The decoder shall support being always joined to both primary and backup multicast streams.Redundancy EventsThe system shall support physical link redundancy (primary and backup streams on different physical interfaces).The system shall support logical link redundancy (primary and backup streams may be on the same physical interface).Streaming modeThe system shall support video, audio, and control signals streamed on separate multicasts.IP protocolsIP address assignmentThe system shall support the following for IP address assignment:IPv4 addressesDHCP, static, or automatic IP configurationHost nameAll devices in the system shall have the ability to configure device host name.DiscoveryAll devices in the system shall support mDNS/DNS-SD.IGMPAll devices in the system shall support for the following IGMP capabilities:IGMP v2 and IGMP v3 (SSM)IGMP Immediate leaveStreaming and multicastingDevices in the system shall RTP output (encoder) and RTP input (decoder).SAP/SDPAll devices in the systems shall support SAP/SDP, including session name, description, and originator.Packet loss protectionThe system shall support forward error correction (FEC) per the following:Based on the SMPTE 2022-5:2013 standard.Matrix sizes from 1x4 to 20x20.QoSThe system shall support QoS tagging.RS232 protocolRS232 settingsDevices in the system with RS-232 capabilities shall support the following:Baud rates from 2400-115200Configurable parity, stop bit, and flow control6 pin RS232 connector (3 pins used per service)Projector/display controlDecoders shall support display on/off via RS232 using customizable commands.RS232 over IPEncoders shall support RS232 encapsulation into IP for transmission between encoder and decoder.Decoders shall support the ability to receive RS232 from a source other than the video source.The system shall have the ability to perform bidirectional RS232 communication when configured for unicast transmission.Display controlAspect ratioDecoders shall support the following aspect ratios: full screen, 16:9, 16:10, 4:3, same as source.Input HDMI switchingEncoders shall support switching between HDMI inputs using front panel buttons.Video output matrixThe system shall be able to route any input to any output through the IP network.EDIDDevices in the system shall support the following EDID capabilities:Copying EDID of connected displaysSelecting an internally defined EDIDExporting EDID information via RS232 and management systemInserting EDID information via management systemIndependent EDID settings per outputHDCPThe system shall support the following HDCP capabilities:HDCP 2.2HDCP modes: compliant, non-compliant, and automaticAutomatic scrambling of the IP stream for HDCP sourcesCECThe system shall support the following CEC capabilities:CEC per HDMI 1. 4bCEC commands: monitor on/off, input select, volume up/downDisplay modeDecoders shall have the ability to automatically turn on connected display when source signal is detected.Decoders shall have the ability to automatically turn off connected display when source signal is removed.ScramblingThe system shall support AES 128 encryption of video and audio.The scrambling key shall be controlled by the management system and be configurable per stream.Firmware upgradeField upgradabilityDevices in the system shall support remote upgrade of firmware via the management system.Safe upgradeIf a firmware upgrade fails, the system shall revert to previous firmware.Configuration Import / ExportDevices shall support the following configuration management:Export of unit configurationImport of unit configurationStorage of up to 5-unit configuration files with user defined namesData reportingDevices shall support configuration and display of description and locationUnit location stringUser defined location string may be up to 100 text charactersPower up/ResetDevices in the system shall have a power-up time less than 20 seconds.Alarms and warningsThe system shall support forwarding of alarms and warning messages to the management systemHardwareInterfacesHDMIDual channel devices shall have two independent HDMI inputs per device (AT-OMNI-112, AT-OMNI-512 and AT-OMNI-122).Single channel devices shall have one HDMI input per device (AT-OMNI-111, AT-OMNI-111-WP, AT-OMNI-121 and AT-OMNI-521)All HDMI ports shall support HDMI 2.workDual channel devices shall have two RJ45 network connections per device (AT-OMNI-112, AT-OMNI-512 and AT-OMNI-122).Single channel devices shall have one RJ45 per device (AT-OMNI-111, AT-OMNI-111-WP, AT-OMNI-121 and AT-OMNI-521).AudioDecoders may have analog inputs and outputs. If a decoder has analog inputs and outputs, it will have a quantity that matches the number of channels on the device (two for the OMNI-122 and one for the OMNI-121).Decoders shall support volume control (gain) from 0 dB to 15 dB.Decoders shall support audio mute.Serial communicationDevices shall have a 6 pin RS232 connector (3 pins used per service).Front panel buttonsDisplay on/offDevices may have display on/off front panel buttons for controlling connected display(s).Input selectionDevices may have input select front panel buttons for controlling connected display(s).Volume up/downDevices may have volume up/down front panel buttons for controlling connected display(s).ResetDevices may have a unit reset button recessed on front panel.IDDevices shall have an ID front panel button to indicate the unit in the management system.Push button controlThe management system shall be able to disable the front panel buttons.LEDDevices shall have one or more of the following LEDs:HDMI status LEDsNetwork status LEDsPower status LEDThe management system shall be able to command devices to blink the LEDs to assist in locating a physical unit.Power supplyPower may be connected via either external PSU or PoE.Devices shall be able to automatically switch between external PSU and PoE depending on what is connected.PoEAll devices shall consume less than 13W of power when analog audio is not used so that PoE may be used.All devices shall be able to dynamically switch between RJ45 ports for PoE power in case of input failures.External PSUExternal power supplies shall connect via a two pin captive screw phoenix connector.MTBFAll devices shall have a unit MTBF of 90,000 plianceAll devices shall adhere to the following regulations:FCC part 15 subpart B, ICES-003, Issue 2, Class AEN 60950-1 safety specificationEN 55022 and CISPR22EN 55024CB SchemeRoHSForm FactorsRack MountEncoders and decoders shall be available in a form-factor that allows them to be rack-mounted side-by-side in a standard 19-inch rack.When mounted in a rack, devices shall not consume more than 1RU of rack-space.Rack-mount devices shall also be able to be surface mounted for installation on walls or underneath tables.Rack-mount devices shall have front-to-rear airflow to allow for device stacking with no impact to airflow.WallplateAn encoder shall be available in a wallplate form factor for installation in standard U.S. 2-gang boxes.Wallplate models shall be available with both black and white faceplates.EnvironmentalTemperatureAll devices shall support a 0° C - 50° C external ambient operating temperature.All devices shall support a -40° C to 70° C external ambient storage (non-operational) temperature.HumidityAll devices shall operate up to 90% relative humidity, non-condensing.ESDAll devices shall withstand ESD up to ±12kV (air) and ±8kV (contact).AT-UHD-SW-510W / EUThe 5x1 switcher shall have Two HDMI, one DisplayPort, and one USB-C input, plus an input for wireless AVThe switch shall have the ability to create a secure wireless access point for which BYOD devices can connect.The switch shall have the ability to create a wireless bridge to another available wireless access point that is in range.The switch shall have the ability to create a custom splash screen via image upload or HTML.Mirrored HDBaseTTM?and HDMI outputsMatrixed HDBaseTTM and HDMI outputs Wireless AV gateway for iOS?, Android?, Mac?, Chromebook?, and Windows devices 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling, plus support for 4K/60 4:4:4 and HDR formats on local ports (HDMI, USB-C, and DisplayPort), HDCP 2.2 compliant Automatic input selection and automatic display control Automated system on/off functionality including display control via scheduling (time of day, day of week)Built-in support for occupancy senor triggering for system on/off including display control.USB-C port supports device charging for laptops, tablets, and smartphonesIt will have an audio output switcher, as well as audio embedding and de-embedding The switcher shall be controlled via TCP/IP, RS-232 and JSON over REST.For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.Supported video resolutions: 4096×2160@60/30/25/24Hz*, 3840×2160@60/30/25/24Hz*, 1080p@60/59.9/50/30/29.97/25/24/23.98Hz, 1080i@60/59.94/50Hz, 720p@60/59.94/50Hz, 576p@50Hz, 576i@50Hz, 480p@60/59.96Hz, 480i@60Hz, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1440×900, 1400×1050, 1280×1024, 1280×800, 1366×768, 1360×768, 1152×864, 1024×768, 800×600, 640×480Color space - YUV, RGBChroma Subsampling - 4:4:4, 4:2:2, 4:2:0HDR ? - HDR10 and Dolby? Vision? @ 60Hz on local HDMI outputUSB-C Up to 4K/UHD @ 60Hz for devices supporting USB-C Alternate Mode video outputWireless: Up to 1080p @ 30Hz 4:2:0; dependent on wireless signal qualityAudio Pass Through formats: PCM, Dolby? Digital, Dolby Digital Plus?, Dolby TrueHD, Dolby Atmos?, DTS? Digital Surround?, DTS-HD Master Audio?, and DTS:X?Analog Input - Unbalanced 2-channel, 3.5 mmAnalog Output - Balanced / unbalanced 2-channel, 5-pin captive screwSample Rate - 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzBit Rate - 24-bitSignal bandwidth – 18 GbpsCEC Support on HDBaseT and HDMI outputsHDCP 2.2 compliantUSB Ports: USB Type C: USB-C for AV input (Alternate Mode), USB 2.0 Type A for Wi-Fi? antenna modules (3 ports)USB-C Power - Up to 60 W / 3 A at 20 VUSB-C Device Charging Capability - Up to 20 V, 3 A Output: 60 W @ 20 V, 36 W @ 12 V, 15 W @ 5 VEthernet Port: 1x RJ45Communication and discovery protocols - HTTP, HTTPS, Telnet, SSH, TCP/IP, mDNSEthernet speed - 10/100 MbpsIP addressing - DHCP, staticWi-Fi - EEE 802.11n/ac 2.5 GHz / 5 GHzWi-Fi Protocols - WEP, WPA, PSK, WPA2 PSK, WPA Enterprise, WPA2 EnterpriseWifi dongles – 2x Antennas providedRS-232 – 1x Bidirectional, 3-pin captive screwRelay - 3-pin captive screw, normally open (NO), with adjustable Toggle and Pulse modes with Electrical rating: 48 V @ 1 ATrigger - 4-pin captive screw, Electrical rating: 30 V @ 1 A (max.)Temperature Operating - 32 to 122 Fahrenheit, 0 to 50 CelsiusHumidity (RH) - 20% to 90%, non-condensingPower consumption at full load – 121 WIdle power consumption – 35- 40 WPower Supply - Input: 100 – 240 V AC, 50/60 Hz, Output: 5 V DC Device weight – 3.70 LBS, 1.68 KilogramsDevice Certification - CE, FCC, ULAT-OME-EX-KITThe 4K /UHD Transport System shall be an advanced signal extender system incorporating the following device specifications and backed up with a 10-year manufacturer limited warranty.AV, USB 2.0, Ethernet, power, and control over HDBaseT - Receives 4K/UHD video, USB 2.0, embedded audio, 100Base-T Ethernet, power, and control through a single cableShall provide USB 2.0 data rate up to 120 Mbps.2.5 Watts per USB device interface4K/UHD capability @ 60 Hz with 4:2:0 Chroma subsamplingVideo resolution support for 4096×2160@24/25/30/50/60Hz*, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480iVESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480YUV and RGB Color Space4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8-bit, 10-bit, 12-bit Color DepthTransmitter powered by receiver via PoE (Power over Ethernet)Extends RS-232, CEC, and Ethernet control signalsHDCP 2.2 compliant. Adheres to latest specification for High-bandwidth Digital Content Protection.USB 2.0 interfacing and extension up to 330 feed (100 meters)CEC pass thruMulti-channel audio compliant - Supports PCM, Dolby? Digital, Dolby Digital Plus?, Dolby TrueHD, Dolby Atmos?, DTS? Digital Surround?, DTS-HD Master Audio?, and DTS:X?Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzField-updateable firmware via front panel USB portFront panel Power and Link status LEDsCAT5e/6 @ 4K up to 70 meters up to 230 feetCAT6a/7 @ 4K up to 100 meters up to 328 feetCAT5e/6 @ 1080p up to 100 meters up to 328 feetPower supply certified for CE, FCC, RoHS.Definitions and Abbreviations100BaseT -An Ethernet standard for transmitting at 100 Mbps over twisted pair cable1000Base-T / Gigabit Ethernet - An Ethernet standard that transmits at 1 Gbps over twisted pair cable4K - Digital cinema resolution at 4092x2160 pixels. Frame rates can range from 24 to 120 fps. 4K is often mentioned along with Ultra HD, which has a video resolution of 3840x2160720p - Progressive-scan HDTV transmission standard. Refers to an active pixel rate of 1280x720 with a vertical refresh rate of 60 frames per second for NTSC countries or 50 frames per second for PAL/SECAM countriesAES/EBU - Audio Engineering Society/European Broadcasting UnionAspect ratio - The relationship of the horizontal dimension to the vertical dimension of an Image.Balanced – 3-conductor, 110-ohm cabling with an XLR connector, typically referred to as “AES/EBU audio.”CAT 5 - Category 5 - Describes the network cabling standard that consists of four unshielded twisted pairs of copper wire terminated by RJ-45 connectors. CAT 5 cabling supports data rates up to 100 Mbps and a minimum bandwidth of 100 MHz CAT 5 is based on the EIA/TIA 568 Commercial Building Telecommunications Wiring Standard. CAT 5e - Enhanced Category 5- The standard for the next higher grade of unshielded twisted pair - UTP beyond Category 5. The CAT 5e specification was developed to provide more robust support for 1000Base-T, and includes tighter limits than CAT 5 for NEXT, ELFEXT, and return loss. CAT 5e cabling supports a minimum bandwidth of 100 MHzCAT 6 - Category 6 - The standard for the next higher grade of unshielded twisted pair UTP cabling beyond CAT 5e. The standard defines components (cable and connecting hardware) and cabling (basic link and channel) for Category 6 channels, as well as Level III field tester requirements. CAT 6 cabling supports a minimum bandwidth of 250 MHzCAT 6a - Category 6a, or Augmented Category 6 A higher grade of twisted pair cabling beyond standard CAT 6-rated cable, with twice the bandwidth capability. CAT 6a features a shielded twisted pair cable design, with braid and foil shielding around the unshielded twisted pair conductors. This design improves crosstalk performance at high frequencies. CAT 6a cabling supports a minimum bandwidth of 500 MHz CAT 7 - Category 7 - The cable standard for 10 Gigabit Ethernet using shielded twisted pair - STP cable. CAT 7 features strict guidelines for crosstalk and system noise, requiring shielding for each pair of wires and the cable. CAT 7 cabling supports a minimum bandwidth of 600 MHzCEC - Consumer Electronics ControlDDC - Display Data ChannelDHCP - Dynamic Host Configuration Protocol.DPCP- DisplayPort Content ProtectionDRM - Digital Rights ManagementEDID - Extended Display Identification DataFCC - Federal Communications Commissionfps - Frames per SecondHDBaseT- A signal extension technology defined by the HDBaseT Alliance for combining and transporting HDMI audio/video, Ethernet, control signals, and DC power using category-type twisted pair cable.HDCP - High-bandwidth Digital Content ProtectionHDMI - High-Definition Multimedia InterfaceHDTV - High Definition TelevisionIP - Internet ProtocolJPEG - Joint Photographic Experts GroupLAN - Local Area NetworkMAC - Media Access ControlMatrix Switcher- A means of selecting an input source and connecting it to one or more outputs. Like a regular switcher, but with multiple inputs and multiple outputs. MHz - MegahertzMiracast - A protocol developed by the Wi-Fi Alliance for streaming of audio and video media between devices over a Wi-Fi connection Multicast - Multicast addressing is a network technology for the delivery of information to a group of destinations simultaneously using the most efficient strategy to deliver the messages over each link of the network only once, creating copies only when the links to the multiple destinations split. A single stream is sent from the source to a group of recipientsPCM - Pulse Code ModulationRS-232 - An Electronic Industries Association - EIA serial digital interface standard. specifying the characteristics of the communication path between two devices using either DB-9 or DB-25 connectors.S/PDIF - Sony/Philips Digital Interconnect FormatSMPTE - Society of Motion Picture and TelevisionSource - AV equipment connected to the inputs of the AV switcher or extenderSTP - Shielded Twisted Pair, CATx cable with internal metallic electromagnetic shielding for individual pairs and/or the cable overall. TCP/IP - Transmission Control Protocol/Internet ProtocolTMDS - Transition Minimized Differential SignalingTOSLINK - An optical fiber connection standard for digital audio developed by ToshibaUnbalanced - 2-conductor, 75-ohm coaxial cable with an RCA connector.Ultra HD - Video resolution at 3840x2160 pixels, with frame rates from 24 to 60 fps. Ultra HD is often mentioned along with 4K.USB - Universal Serial BusUTP - Unshielded Twisted Pair, CATx cable without internal metallic electromagnetic shieldingVESA - Video Electronics Standards AssociationYCbCr - Used to describe the color space for interlaced component video.YUV - Defines color space in terms of Y - luminance or brightness, and two color-difference components, U - red minus luminance and V - blue minus luminance. YUV is interchangeable with “YCbCr” for digital component video and “YPbPr” for analog91100-R1521424901143000Toll free ? 877.536.3976 ? 41.43.508.4321? 2020 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download