ARCAT | Free Building Product CAD Details, BIM, Specs and …

 SECTION 08 53 00VINYL WINDOWSDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2019 - 2020 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** WinDoor; vinyl windows.This section is based on the products of WinDoor, which is located at:7500 Amsterdam Dr.Orlando, FL 32832Tel: 407-481-8400Fax: 407-481-0505Email: JRedden@Web: [ Click Here ] for additional information.Our craftsmanship, attention to detail, and ultra-high-performance ratings have made WinDoor the product of choice for five-star resorts, luxury high-rise condominiums, and celebrity mansions along the US coastline for over 15 years. Manufacturing from our 320,000 square foot facility in Orlando, Florida; our aluminum, vinyl, and thermally-broken I-strut aluminum products are AAMA, ASTM and Miami-Dade -Florida approvals and TDI approved products are always available in BIG SIZES, custom colors and custom configurations.

GENERAL

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

Vinyl Windows of the following types:

Tilt-Turn windows. (V-100, V-101, and V-102 Series)

Picture windows. (V-130 Series)

Hinged windows. (HY-Vent Series)

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 06 10 00 - Rough Carpentry.

Section 07 91 23 - Backer Rods.

Section 08 51 13 - Aluminum Windows.

Section 08 83 13 - Mirrored Glass Glazing.

REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

American Architectural Manufacturers Association (AAMA).

Florida Building Code (FBC).

Florida High-Velocity Hurricane Zones (HVHZ).

Miami Dade County.

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data:

Manufacturer's data sheets on each product to be used.

Preparation instructions and recommendations.

Storage and handling requirements and recommendations.

Typical installation methods.

** NOTE TO SPECIFIER ** Delete if not applicable to product type.

Verification Samples: Two representative units of each type, size, pattern and color.

Shop Drawings: Include details of materials, construction and finish. Include relationship with adjacent construction.

QUALITY ASSURANCE

Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with a minimum five years documented experience.

Installer Qualifications: Company specializing in performing Work of this section with minimum two years documented experience with projects of similar scope and complexity.

Source Limitations: Provide each type of product from a single manufacturing source to ensure uniformity.

** NOTE TO SPECIFIER ** Include mock-up if the project size or quality warrant the expense. The following is one example of how a mock-up on might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

Mock-Up: Construct a mock-up with actual materials in sufficient time for Architect's review and to not delay construction progress. Locate mock-up as acceptable to Architect and provide temporary foundations and support.

Intent of mock-up is to demonstrate quality of workmanship and visual appearance.

If mock-up is not acceptable, rebuild mock-up until satisfactory results are achieved.

Retain mock-up during construction as a standard for comparison with completed work.

Do not alter or remove mock-up until work is completed or removal is authorized.

PRE-INSTALLATION CONFERENCE

Convene a conference approximately two weeks before scheduled commencement of the Work. Attendees shall include Architect, Contractor and trades involved. Agenda shall include schedule, responsibilities, critical path items and approvals.

DELIVERY, STORAGE, AND HANDLING

Store and handle in strict compliance with manufacturer's written instructions and recommendations.

Protect from damage due to weather, excessive temperature, and construction operations.

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

WARRANTY

Manufacturer's Warranty: Provide manufacturer's standard limited warranty.

PRODUCTS

MANUFACTURERS

Acceptable Manufacturer: WinDoor, which is located at: 7500 Amsterdam Dr.; Orlando, FL 32832; Tel: 407-481-8400; Fax: 407-481-0505; Email: JRedden@; Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Delete article if not required.

VINYL WINDOWS

** NOTE TO SPECIFIER ** The Innovative Tilt-Turn V-100 provides 2 different opening options. The first allows you to swing open the sash inwards; the second tilts open from the top providing a vent. The unit is secured completely with our multi-point lock and seal system. Give your home a luxurious, advanced product through which to enjoy your outdoor scenery.Pair this with any other WinDoor Vinyl product for impeccable NFRC ratings and seamless visual appeal. Our heavy-duty, reinforced vinyl materials are high impact and non-impact certified. They are perfect for virtually any installation. Delete if not required.

Basis of Design: V-100 Series Vinyl Tilt-Turn Window; as manufactured by WinDoor.

Performance and Design Requirements:

Standards Compliance: Meets Miami Dade protocols.

** NOTE TO SPECIFIER ** Delete design pressure options not required.

Design Pressure, Non-Impact: Positive 130 psf (6.22 kPa) and negative 150 psf (7.18 kPa).

Design Pressure, Impact: Positive 100 psf (4.79 kPa) and negative 130 psf (6.22 kPa).

Water Resistance: 20 psf (0.96 kPa).

** NOTE TO SPECIFIER ** Delete configuration options not required.

Configuration: Single, tilt-turn window.

** NOTE TO SPECIFIER ** Delete width options not required.

Width: 18 inches (457 mm) minimum.

Width: 54 inches (1372 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 25 inches (635 mm) minimum.

Height: 80 inches (2032 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Configuration: Twin, tilt-turn window.

** NOTE TO SPECIFIER ** Delete width options not required.

Width: 18 inches (457 mm) minimum.

Width: 84 inches (2134 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 25 inches (635 mm) minimum.

Height: 80 inches (2032 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Configuration: Vertical stacked, tilt-turn window.

** NOTE TO SPECIFIER ** width options not required.

Width: 18 inches (457 mm) minimum.

Width: 54 inches (1372 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 158 inches (4013 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Configuration: Vertical stacked, tilt-turn window with hopper as top vent.

** NOTE TO SPECIFIER ** Delete width options not required.

Width: 48 inches (1219 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 108 inches (2743 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Glazing:

** NOTE TO SPECIFIER ** Delete glazing options not required.

Insulated glazing.

Non-impact glazing.

Impact rated glazing.

Tint: Clear.

Tint: _____.

Tint: As indicated on Drawings.

Tint: To be selected by Architect.

Coating: Low-E.

Coating: None.

Coating: _____.

** NOTE TO SPECIFIER ** Delete frame options not required.

Frame: Flange.

Frame: Flush.

Muntins:

** NOTE TO SPECIFIER ** Delete muntin options not required.

Applied on both exposed surfaces of glass and within airspace.

Profile: 1 inch (25 mm).

Profile: 2-1/4 inches (57 mm).

Pattern: Standard.

Pattern: Custom, as indicated on Drawings.

Pattern: Custom, to be selected by Architect.

Hardware:

Locking: Series of mushroom-cams and striker plates to prevent sash from being pried out. Allows locking of entire window or allowing window to tilt-in only.

** NOTE TO SPECIFIER ** Delete options not required.

Handle: Tilt-turn handle with keylock.

Handle: Custodial E-plate with handle.

Finish: White.

Finish: Bronze.

Finish: Black.

Finish: Polished brass.

Finish: Oil rubbed bronze.

Finish: Satin nickel.

Finish: Custom color, _____.

** NOTE TO SPECIFIER ** Delete finish and color options not required.

Finish: White.

Finish: Factory painted.

Color, Custom: _____.

Color, Custom: To be selected by Architect.

Finish: Applied woodgrain.

Finish: Factory painted, two-tone.

Interior Color: _____.

Interior Color: To be selected by Architect.

Exterior Color: _____.

Exterior Color: To be selected by Architect.

Included Options:

** NOTE TO SPECIFIER ** Delete options not required.

Blinds between the glass.

Full screen.

** NOTE TO SPECIFIER ** The Innovative Tilt-Turn V-101 provides 2 different opening options. The first allows you to swing open the sash inwards; the second tilts open from the top providing a vent. The unit is secured completely with our multi-point lock and seal system. Give your home a luxurious, advanced product through which to enjoy your outdoor scenery.Pair this with any other WinDoor Vinyl product for impeccable NFRC ratings and seamless visual appeal. The V-101 is heavy-duty, reinforced vinyl materials and non-impact certified. They are perfect for virtually any installation. Delete if not required.

Basis of Design: V-101 Series Vinyl Tilt-Turn Window; as manufactured by WinDoor.

Performance and Design Requirements:

Standards Compliance: Design Pressure: Positive 70 psf (3.35 kPa) and negative 100 psf (4.79 kPa).

Water Resistance: 10.5 psf (0.50 kPa).

** NOTE TO SPECIFIER ** Delete configuration options not required.

Configuration: Single, tilt-turn window.

** NOTE TO SPECIFIER ** Delete width options not required.

Width: 18 inches (457 mm) minimum.

Width: 48 inches (1219 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 35 inches (889 mm) minimum.

Height: 78 inches (1981 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Configuration: Twin, tilt-turn window.

** NOTE TO SPECIFIER ** Delete width options not required.

Width: 18 inches (457 mm) minimum.

Width: 84 inches (2134 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 35 inches (889 mm) minimum.

Height: 78 inches (1981 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Configuration: Vertical stacked, tilt-turn window with hopper as top vent.

** NOTE TO SPECIFIER ** Delete width options not required.

Width: 48 inches (1219 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 108 inches (2743 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Glazing:

** NOTE TO SPECIFIER ** Delete glazing options not required.

Insulated glazing.

Non-impact glazing.

Tint: Clear.

Tint: _____.

Tint: As indicated on Drawings.

Tint: To be selected by Architect.

Coating: Low-E.

Coating: None.

Coating: _____.

** NOTE TO SPECIFIER ** Delete frame options not required.

Frame: Flange.

Frame: Flush.

Muntins:

** NOTE TO SPECIFIER ** Delete muntin options not required.

Applied on both exposed surfaces of glass and within airspace.

Profile: 1 inch (25 mm).

Profile: 2-1/4 inches (57 mm).

Pattern: Standard.

Pattern: Custom, as indicated on Drawings.

Pattern: Custom, to be selected by Architect.

Hardware:

Locking: Series of mushroom-cams and striker plates to prevent sash from being pried out.

** NOTE TO SPECIFIER ** Delete options not required.

Handle: Tilt-turn handle with keylock.

Handle: Custodial E-plate with handle.

Finish: White.

Finish: Bronze.

Finish: Black.

Finish: Polished brass.

Finish: Oil rubbed bronze.

Finish: Satin nickel.

Finish: Custom color, _____.

** NOTE TO SPECIFIER ** Delete finish and color options not required.

Finish: White.

Finish: Factory painted.

Color, Custom: _____.

Color, Custom: To be selected by Architect.

Finish: Applied woodgrain.

Finish: Factory painted, two-tone.

Interior Color: _____.

Interior Color: To be selected by Architect.

Exterior Color: _____.

Exterior Color: To be selected by Architect.

Included Options:

** NOTE TO SPECIFIER ** Delete options not required.

Blinds between the glass.

Full screen.

** NOTE TO SPECIFIER ** The Innovative Tilt-Turn V-102 provides 2 opening options just like the V-100 and V-101. This product, however, is available in non-impact with an integral fin framing. The first opening option allows you to swing the sash inwards, while the second tilts open from the top acting like a vent. The unit is secured completely with our multi-point lock and seal system. Give your home a luxurious, advanced product through which to enjoy your outdoor scenery.Pair this with any other WinDoor Vinyl product for impeccable NFRC ratings and seamless visual appeal. Our heavy-duty, reinforced vinyl materials are high impact and non-impact certified. They are perfect for virtually any installation. Delete if not required.

Basis of Design: V-102 Series Vinyl Tilt-Turn Window; as manufactured by WinDoor.

Performance and Design Requirements:

Standards Compliance: Design Pressure: Positive 70 psf (3.35 kPa) and negative 80 psf (3.83 kPa).

Water Resistance: 10.5 psf (0.50 kPa).

Configuration: Single, tilt-turn window.

** NOTE TO SPECIFIER ** Delete width options not required.

Width: 18 inches (457 mm) minimum.

Width: 48 inches (1219 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

** NOTE TO SPECIFIER ** Delete height options not required.

Height: 35 inches (889 mm) minimum.

Height: 78 inches (1981 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Glazing:

** NOTE TO SPECIFIER ** Delete glazing options not required.

Insulated glazing.

Non-impact glazing.

Tint: Clear.

Tint: _____.

Tint: As indicated on Drawings.

Tint: To be selected by Architect.

Coating: Low-E.

Coating: None.

Coating: _____.

Frame: Integral fin frame.

Muntins:

** NOTE TO SPECIFIER ** Delete muntin options not required.

Applied on both exposed surfaces of glass and within airspace.

Profile: 1 inch (25 mm).

Profile: 2-1/4 inches (57 mm).

Pattern: Standard.

Pattern: Custom, as indicated on Drawings.

Pattern: Custom, to be selected by Architect.

Hardware:

Locking: Series of mushroom-cams and striker plates to prevent sash from being pried out.

** NOTE TO SPECIFIER ** Delete options not required.

Handle: Tilt-turn handle with keylock.

Handle: Custodial E-plate with handle.

Finish: White.

Finish: Bronze.

Finish: Black.

Finish: Polished brass.

Finish: Oil rubbed bronze.

Finish: Satin nickel.

Finish: Custom color, _____.

** NOTE TO SPECIFIER ** Delete finish and color options not required.

Finish: White.

Finish: Factory painted.

Color, Custom: _____.

Color, Custom: To be selected by Architect.

Finish: Applied woodgrain.

Finish: Factory painted, two-tone.

Interior Color: _____.

Interior Color: To be selected by Architect.

Exterior Color: _____.

Exterior Color: To be selected by Architect.

Included Options:

** NOTE TO SPECIFIER ** Delete options not required.

Blinds between the glass.

Full screen.

** NOTE TO SPECIFIER ** Enjoy viewing your lush landscape scenery through the fixed V130 Vinyl Picture window. This non-operable fixed window will pair well with our exclusive vinyl products. Heavy-duty, reinforced vinyl materials for high impact and non-impact applications, all while providing remarkable NFRC performance. Perfect for High rises and residential installations. Delete if not required.

Basis of Design: V-130 Series Vinyl Picture Window; as manufactured by WinDoor.

Performance and Design Requirements:

Standards Compliance: Meets Miami Dade protocols.

** NOTE TO SPECIFIER ** Delete design pressure options not required.

Design Pressure, Non-Impact: Positive 100 psf (4.79 kPa) and negative 120 psf (5.75 kPa).

Design Pressure, Impact: Positive 80 psf (3.83 kPa) and negative 80 psf (3.83 kPa).

Water Resistance: 30.0 psf (1.44 kPa).

** NOTE TO SPECIFIER ** Delete configuration option not required.

Configuration: Fixed window, single.

** NOTE TO SPECIFIER ** For 60 inch (1524 mm) width, the maximum height is 60 inches (1524 mm). For 54 inch (1372 mm) width, the maximum height is 84 inches (2134 mm). Delete size options not required.

Width: 18 inches (457 mm) minimum.

Width: 54 inches (1372 mm).

Width: 60 inches (1524 mm).

Width: As indicated on Drawings.

Width: _____.

Height: 18 inches (457 mm) minimum.

Height: 60 inches (1524 mm).

Height: 84 inches (2134 mm).

Height: As indicated on Drawings.

Height: _____.

Configuration: Fixed window, triple.

** NOTE TO SPECIFIER ** Delete size options not required.

Width: 72 inches (1829 mm) minimum.

Width: 162 inches (4115 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

Height: 18 inches (457 mm) minimum.

Height: 84 inches (2134 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Glazing:

** NOTE TO SPECIFIER ** Delete glazing options not required.

Insulated glazing, double glazed.

Non-impact glazing.

Impact rated glazing.

Tint: Clear.

Tint: _____.

Tint: As indicated on Drawings.

Tint: To be selected by Architect.

Coating: Low-E.

Coating: None.

Coating: _____.

** NOTE TO SPECIFIER ** Delete frame options not required.

Frame: Fin. Depth: 2-3/4 inches (70 mm).

Frame: Flange. Depth: 2-3/4 inches (70 mm).

Frame: Flush. Depth: 2-3/4 inches (70 mm).

Muntins:

** NOTE TO SPECIFIER ** Delete muntin options not required.

Applied on both exposed surfaces of glass and within airspace.

Applied on both exposed surfaces of glass.

Profile: 1 inch (25 mm).

Profile: 2-1/4 inches (57 mm).

Pattern: Standard.

Pattern: Custom, as indicated on Drawings.

Pattern: Custom, to be selected by Architect.

** NOTE TO SPECIFIER ** Delete finish and color options not required.

Finish: White.

Finish: Factory painted.

Color, Custom: _____.

Color, Custom: To be selected by Architect.

Finish: Applied woodgrain.

Finish: Factory painted, two-tone.

Interior Color: _____.

Interior Color: To be selected by Architect.

Exterior Color: _____.

Exterior Color: To be selected by Architect.

** NOTE TO SPECIFIER ** When it comes to ventilation, consider WinDoor's HY- Vent Window which provide excellent ventilation and is easily to operate. Compare the ventilation to a basic window which slides open allowing air to flow through only half of the area. The HY - Vent Window allows Maximum Air Circulation from the top of the room which is crucial in high & small spaces.The HY-Vent Window is hinged on the bottom and open inward from the top allowing fresh-air in when needed. Delete if not required.

Basis of Design: HY-Vent Series Vinyl Window; as manufactured by WinDoor.

Performance and Design Requirements:

Standards Compliance: Meets Miami Dade protocols.

Configuration: Bottom hinged, tilt in window.

Vents: Single.

** NOTE TO SPECIFIER ** Delete size options not required.

Width: 48 inches (1219 mm) maximum.

Width: As indicated on Drawings.

Width: _____.

Height: 36 inches (94 mm) maximum.

Height: As indicated on Drawings.

Height: _____.

Glazing:

** NOTE TO SPECIFIER ** Delete glazing options not required.

Insulated glazing.

Non-impact glazing.

Impact rated glazing.

Tint: Clear.

Tint: _____.

Tint: As indicated on Drawings.

Tint: To be selected by Architect.

Coating: Low-E.

Coating: None.

Coating: _____.

** NOTE TO SPECIFIER ** Delete frame options not required.

Frame: Flange.

Frame: Flush.

Muntins:

** NOTE TO SPECIFIER ** Delete muntin options not required.

Applied on both exposed surfaces of glass and within airspace.

Profile: 1 inch (25 mm).

Profile: 2-1/4 inches (57 mm).

Pattern: Standard.

Pattern: Custom, as indicated on Drawings.

Pattern: Custom, to be selected by Architect.

** NOTE TO SPECIFIER ** Delete operation options not required.

Operation: Standard operating handle lever-pull with drive-rod.

Operation: Clear story pole with over the sill operator.

Operation: Electronic motorization.

** NOTE TO SPECIFIER ** Delete finish and color options not required.

Finish: White.

Finish: Factory painted.

Color, Custom: _____.

Color, Custom: To be selected by Architect.

Finish: Applied woodgrain.

Finish: Factory painted, two-tone.

Interior Color: _____.

Interior Color: To be selected by Architect.

Exterior Color: _____.

Exterior Color: To be selected by Architect.

** NOTE TO SPECIFIER ** Delete article if not required.

EXECUTION

EXAMINATION

Do not begin installation until substrates have been properly constructed and prepared.

If substrate preparation is the responsibility of another installer, notify Architect in writing of unsatisfactory preparation before proceeding.

PREPARATION

Clean surfaces thoroughly prior to installation.

Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

Perform cutting, fitting, forming, drilling, and grinding of frames, without damage to finish, as needed to fit project conditions and make watertight. Replace components with damage to exposed finishes.

INSTALLATION - WINDOWS

Install in accordance with manufacturer's instructions approved submittals and in proper relationship with adjacent construction.

Attach window frame and shims to perimeter blocking at openings to accommodate construction tolerances and other irregularities. Maintain integrity of air barriers and vapor retarder sheets.

Align windows plumb and level, free of warp or twist.

Adjust vents to close snugly and put in smooth operating order.

CLEANING AND PROTECTION

Clean products in accordance with the manufacturer's recommendations.

Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download