GSA Advantage!



MYCO TRAILERS, LLC

OCTOBER 1, 2009 PAGE 1

Model: MG36XXHTR AIR TRANS 11 METER NSW RIB TRAILER Air Transportable Model, Hot dipped galvanized triple axle.

Gross Vehicle Weight Rating: 24,000 lbs. (10,886 kg.)

Weight: 4,200 lbs. (1,905 kg.).

Width: 97.5” (2.48M).

Length: 36’-0” (10.97M).

FEATURES OF THE TRAILER:

Welded cold formed channel frame. Hot dipped galvanized.

3-pair longitudinal 2x6 bunk hull support. Sail cloth skin over closed cell padding.

3) 8,000 lb. straight axles. Commercial duty Dexter brand. With EZ-Lube greasing system, Unitized grease seals, sandblasted, epoxy primer, urethane top coat.

Slipper spring equilizing suspension w/rubber eye bushings. 4,000 lb. each. Sandblasted, epoxy primed and urethane top coated.

Axles spacing 36” (914mm). Track 85.5” (2.17M).

Hubs, 8 bolt on 6.5” bolt circle, 9/16” UNF studs. Grease lubrication.

Brakes. 3-axle 13.3” ventilated silver-cad plated steel disc. Caliper, hydraulic single piston 2.5” diameter, stainless steel.

Air/hydraulic brake control w/emergency break-away lock-up. Commercial “Glad-hand” truck to trailer air connection. Load control for F800 tow vehicle.

Hydraulic brake lines, stainless steel double flared with brake ends.

Air lines, 3/8” outside diameter nylon tubing.

Stainless steel fasteners w/locking nuts on all components except brakes, suspension and safety devises requiring high strength fasteners.

7) 1200 x 16.5 load range F radial tires. 4040 lb. capacity each @ 75 PSI.

7) 16.5 x 8.25” cast aluminum wheels, 3,700 lb. capacity each.

1) Spare tire mount, port side.

1) Lug nut wrench.

1) 10”x10”x24” locking aluminum tool box for jack and lug wrench storage. Starboard side

Aluminum fenders, double radius triple axle.

Lunette eye hitch, 30,000 lb.(13,608 kg) capacity, 3” I.D. x 1.625” section, 35” height above road.

Submersible lighting w/heat shrink/seal connections.

Light Emitting Diode (LED) lights. 12V. US Federal DOT lighting.

Hydraulically operated tilt frame for loading into C-130 cargo aircraft.

Hydraulically operated retractable tongue jack, with 3,500 lb. dual wheel caster and static safety arm.

Winch, 3,500 lb. with doubling block and stainless steel cable.

Welded 5/8” dia. tie down fittings for securing boat to trailer and trailer to aircraft for air transport. 6,000 lb (2,722 kg) working load each.

MYCO TRAILERS, LLC

OCTOBER 1, 2009 PAGE 2

Model: MG36XXHTR NON TILT 11 Meter NSW RIB TRAILER Non- TILT. Triple axle, Hot Dipped Galvanized. Wet launch. Non-Tilt.

GVWR, (gross vehicle weight rating): 24,000 lb. (10,886 kg)

GAWR, (gross axle weight rating): 8,000 lb. (3,629 kg)

Maximum Tongue Load: 4,000 lb. (1,814 kg)

Weight: 4,400 lb (1,996 kg) approximate. Capacity: 19,600 lb. (8.891 kg)

FEATURES OF THE TRAILER:

Welded steel frame.

10” Structural channel frame rails.

5” cold form channel frame cross members.

Hot dipped galvanized finish.

Hull support. 3-pair padded and sail cloth covered pressure treated wood, longitudinal bunks, non adjustable with stainless steel through bolts.

Bow stop/support. Two piece rubber “D”-blocks.

Three 8,000 lb. straight axles with “EZ-Lube” spindle grease system and unitized seals. Painted with epoxy primer and polyurethane top coat over sandblasted surface.

Suspension: Slipper leaf spring with equalizers between axles.

Brakes: 13.3” Hydraulic Disc, silver-cadmium plate steel rotor, stainless steel mount and caliper, safety wired. 3-axle.

Seven, 1200 x 16.5 load range F tires.

Seven, 16.5” cast aluminum, with chrome acorn lug nuts.

Spare tire mount.

Air/hydraulic brake control with emergency break away actuation.

Seamless stainless steel hydraulic brake line.

Lighting: LED, DOT approved water proof lights and wiring system.

Draw bar (Lunette eye) hitch. 35” height.

12,000 lb. manual tongue jack with sand foot.

Tool box, aluminum 10” x 10” x 24” with pad lockable hasp.

Aluminum fenders.

Tie down points for attaching boat to trailer.

Winch: 3,500 lb. two speed manual with ¼” x 15’ galvanized steel cable and snap hook.

Jack, 6-ton bottle.

Wrench, lug nut.

3) 2” x 10’ ratchet straps. Securing boat to trailer for road transport.

Standard Form 1449, Contract for Commercial Items (Cont’d) Page 1B

Myco Trailers, LLC

Contract Number GS-07F-0224W

GENERAL SERVICES ADMINISTRATION

FEDERAL ACQUISITION SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE CATALOG/PRICE LIST

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order is available through GSA Advantage!, a menu-driven database system. The INTERNET address for GSA Advantage! is

SCHEDULE TITLE: Federal Supply Schedule 084 – Total Solutions for Law Enforcement, Security, Facility Management Systems Fire, Rescue, Special Purpose Clothing, Marine Craft and Emergency/Disaster Response

FSC Group: 19

CONTRACT NUMBER: GS-07F-0224W

CONTRACT PERIOD: February 5, 2010 – February 4, 2015

For more information on ordering from Federal Supply Schedules click on the GSA Schedules link at

CONTRACTOR: Myco Trailers, LLC

2703 29th Ave. E

Bradenton, FL 34208-7416

Phone number: 941-748-2397

Fax number: 941-747-2819

E-Mail: tim@

CONTRACTOR’S ADMINISTRATION SOURCE: Tim Moran

Address: Same as above

Phone/Fax number: Same as above

E-Mail: Same as above

BUSINESS SIZE: Small

CUSTOMER INFORMATION:

1a. TABLE OF AWARDED SPECIAL ITEM NUMBERS (SINs)

SIN DESCRIPTION

260-11 Boat Trailers

1b. LOWEST PRICED MODEL NUMBER AND PRICE FOR EACH SIN:

SIN MODEL PRICE

260-11 MG36XXHTR-AT TRAILER $40,789.00

260-11 MG36XXHTR-NT TRAILER $26,179.00

Standard Form 1449, Contract for Commercial Items (Cont’d) Page 1C

Myco Trailers, LLC

Contract Number GS-07F-0224W

1c. HOURLY RATES:

N/A

2. MAXIMUM ORDER*: $300,000 per SIN

*If the best value selection places your order over the Maximum Order identified in this catalog/pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contactor for a better price. The contractor may (1) offer a new price for this requirement (2) offer the lowest price available under this contract or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the schedule contract in accordance with FAR 8.404.

3. MINIMUM ORDER: None

4. GEOGRAPHIC COVERAGE: Domestic, 50 states, Washington, DC, Puerto Rico, US Territories and to a CONUS port or consolidation point for orders received from overseas activities

5. POINT(S) OF PRODUCTION: Bradenton, FL 34208

6. DISCOUNT FROM LIST PRICES: SIN 260-11 – 2% from the accepted pricelist. For calculation of the GSA Schedule price (price paid by customers ordering from the GSA Schedule, and the price to be loaded in to GSA Advantage), the contractor should deduct the appropriate basic discount from the list price and use the following calculation to include the IFF (currently .75%):

Negotiated price divided by (1 minus .0075) which equates to Negotiated price divided by 0.9925.

Example: ($100,000 / 0.9925) = $100,755.67

7. QUANTITY DISCOUNT(S): None

8. PROMPT PAYMENT TERMS: Net 30

9.a Government Purchase Cards must be accepted at or below the micro-purchase threshold.

9.b Government Purchase Cards may be accepted above the micro-purchase threshold.

10. FOREIGN ITEMS: None

11a. TIME OF DELIVERY: Shipped 90 Days after receipt of order

11b. EXPEDITED DELIVERY: 60 Days after receipt of order

11c. OVERNIGHT AND 2-DAY DELIVERY: N/A

11d. URGENT REQUIRMENTS: N/A

12. FOB POINT: Origin-Prepay and Add

13a. ORDERING ADDRESS: Same as Contractor

Standard Form 1449, Contract for Commercial Items (Cont’d) Page 1D

Myco Trailers, LLC

Contract Number GS-07F-0224W

13b. ORDERING PROCEDURES: For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405-3

14. PAYMENT ADDRESS: Same as contractor

15. WARRANTY PROVISION: Standard Commercial Warranty. Customer should contact contractor for a copy of the warranty.

16. EXPORT PACKING CHARGES: Not applicable

17. TERMS AND CONDITIONS OF GOVERNMENT PURCHASE CARD ACCEPTANCE: (We may accept for thresholds above the micro-purchase level)

18. TERMS AND CONDITIONS OF RENTAL, MAINTENANCE, AND REPAIR (IF APPLICABLE): N/A

19. TERMS AND CONDITIONS OF INSTALLATION (IF APPLICABLE): N/A

20. TERMS AND CONDITIONS OF REPAIR PARTS INDICATING DATE OF PARTS PRICE LISTS AND ANY DISCOUNTS FROM LIST PRICES (IF AVAILABLE): N/A

20a. TERMS AND CONDITIONS FOR ANY OTHER SERVICES (IF APPLICABLE): N/A

21. LIST OF SERVICE AND DISTRIBUTION POINTS (IF APPLICABLE): N/A

22. LIST OF PARTICIPATING DEALERS (IF APPLICABLE): N/A

23. PREVENTIVE MAINTENANCE (IF APPLICABLE): N/A

24a. SPECIAL ATTRIBUTES SUCH AS ENVIRONMENTAL ATTRIBUTES (e.g. recycled content, energy efficiency, and/or reduced pollutants):

24b. Section 508 Compliance for EIT: N/A

25. DUNS NUMBER: 804895170

26. NOTIFICATION REGARDING REGISTRATION IN CENTRAL CONTRACTOR REGISTRATION (CCR) DATABASE: Valid Registration in CCR

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download