SPECS: 63MW POWER PLANT: (MCI) EPZA Cavite City



|[pic] |CFAS Enterprises Inc. |

| |After Market Utility Power Equipment Brokerage |

| |Mailto:Staff@ |

| |Turbine URL: |

| |Reciprocating URL: |

|GTG_1383OM_Piel_Sul_48MCHP.doc |

63 MEGAWATTS DIESEL ELECTRIC POWER PLANT EQUIPMENT

Phase 1: 6 x Pielstick 18PC2-5V 8MW HFO 18- Cylinder Diesel Engine 6600V

Phase 2: 3 x Sulzer 12ZV40/4B 6.18MW HFO 12- Cylinder Diesel 6600V CHP Plant

[pic]

[pic]

Asking Price: US $4.83M "As Is Where Is". Ex-works Pacific Rim

Shutdown 2006-High Fuel Costs

PHASE I

48 MEGAWATTS DIESEL ELECTRIC POWER PLANT EQUIPMENT

Scope of Supply

A.C. Electric Generator Set ( Nos. 1, 2, 3, 4, 5, 6 )

Alternator

Number: 6

Manufacturer: Fuji Electric Co., Ltd.,

Type : F525/34-14,

Rating: 10,000 kva (8,000 kw) power rating

Amps: 875

Volts: 6600

Phases: 3

Power Factor: 3

Year Mfd: 1974

18- Cylinder Diesel Engine

Number: 6

Manufacturer: Fuji SEMT-Pielstik

Model: 18PC2-5V

HP: 11,700 Bhp., 514 rpm

Turbo charged

Mounted on concrete foundation

Serial Nos.

Genset Alternator Engine

No. Serial No. No.

1 KB29170LI-3 205038

2 KB69165LI-3 205036

3 KB69170LI-1 205035

4 KB69170LI-7 205042

5 KB69170LI-4 205034

6 KB69165LI-1 205041

Total Running Hrs As Of 6/30/2006:

Engines no. Total Running Hrs. 

Phase 1: 6 x Pielstick, Model 18PC2-5V

Engine # 1” 53,324.56

Engine # 2: 53,531.92

Engine # 3: 53,831.58

Engine # 4: 51,941.48

Engine # 5: 52,671.38

Engine # 6: 52,511.58

Phase II: 3 x Sulzer, Type 12ZV40/4B, 6180 kw CHP Plant

Engine # 7: 37,246.15

Engine # 8: 38,171.33

Engine # 9: 37,878.11

(Note: Generator Set No. 3 not operational at the time of inspection, for overhauling )

AUXILIARY EQUIPMENT

• 6- Exhaust Silencers

o Mild steel plate of welded construction, 5.33 m x 6.096 m L, horizontal cylindrical shell, with interior steel pipes and baffles, aluminum claddings with rock wool insulation, mounted on steel support on concrete pedestal

• 6- Exhaust Header Pipes

o Mild steel plate of welded construction, 1.0 m diameter, approximately 25 meters overall length, with expansion joints, complete with flange connections

• Smokestack

o Mild steel plate of welded construction, 4 m diameter at bottom to 3 m diameter at top, 13 mm thick at bottom reducing to 6 mm thick at top, 300 meters overall heigth, with 3 landings and ladder

• Black Start Generator

o Caterpillar, Model 3405, 1997 year mfd., 500 kva/400 kw rating, 240 volts, 3-phase, powered by 6-Cylinder Diesel engine, turbo charged, skid mounted

• Ultrasonic Cleaning Machine

• Vibraclean, Model VC7200/1300

• CIP Module

• Lutz/02030-018654, Type B2230, 8.5 li/min pump flow rate

• 2- Sealing Water Pumps

• DP Pump, Type DPVF 2-130, 0.8 li/sec capacity, each driven by 2.2 kw electric motor

• Soft Water Pressuring Tank

o Mild steel plate of welded construction, Model V8, 790 gallons capacity, approximately 1219 mm diameter x 2591 mm high, 150 psig pressure

• 6- Deaerating Tanks

o Mild steel plate of welded construction, 40 liters capacity

• 6- Graviner Oil Mist Detectors

• 6- CMR Bearing Temperature Monitor Panels

• 6- Lubricating Oil Sump Tanks

o Mild steel plate of welded construction, 2.40 m x 2.40 m x 1.80 m H, 13,500 liters capacity

• 6- Main Lube Oil Lubricating Pumps

o Japan, rotary gear type, 150 mm suction and discharge diameter, each driven by;

o 74.6 kw Electric Motor

▪ 3-phase, 440 volts, complete with motor controller and other standard accessories

• 5- Air Compressors

o Ingersoll Rand, 3- cylinder reciprocating piston type, each belt driven by 15 kw electric motor

• 2- Air Receiver Tanks

o Mild steel plate of welded construction, cylindrical, 750 mm diameter x 2400 mm high

• Oil Drip Tank

o Mild steel plate of welded construction, cylindrical, 1.50 m diameter x 3.0 m length, equipped with;

▪ Oil Pump

• Rotary gear type, 50 mm suction and dischagre diameter, driven by;

o 3.73 kw Electric Motor

o 3- phase, 230 volts

• Deepwell Pump

o Grundfos, submersible multi-stage centrifugal type, driven by 55.95 kw electric motor, black iron pipe casing, 350 mm diameter, 150 mm diameter drop and discharge pipe, 300 meters deep, complete with controls and other standard accessories

• 6- Cooling Towers

o Intercool, FRP construction, cylindrical type, 7.26 meters diameter x 8.81 meters high, 2248 cu meter /hr water volume, with blower, driven by;

▪ 14.92 kw Electric Motor

▪ complete with standard accessories

• Concrete Basin

o Reinforced concrete construction, 30 m L x 20 m W x 2.40 m H, open top

• Switchboard

o RG Trans-Electric Corp., metal enclosed, 2 vertical sections with 1200 A main breaker and 6 magnetic controllers for cooling fans

• Raw Water Tank

o Mild steel plate of welded construction, 6.0 m diameter x 7.20 m high, 189,000 liters capacity, vertical cylindrical tank with ladder and top port and other standard accessories

• 2- Soft Water Pumps

o Aurora, single stage centrifugal type, 100 mm x 75 mm suction and discharge diameter, driven by;

▪ 3.73 kw Electric Motor

▪ 3- phase, 220 volts, 1730 rpm, complete with controls and other standard accessories

• Brine Tank

o Plastic construction, 900 mm diameter x 1200 mm high with cover

• 2- Water Softeners

o Mild steel plate of welded construction, 1.20 m diameter x 1.80 m high, vertical cylindrical tank with resins, 4- leg support, complete with standard accessories

• Treated Water Tank

o Mild steel plate of welded construction, 1.80 m diameter x 4.80 m high, vertical cylindrical tank, 4- leg support, complete with standard accessories

• 4- Cooling Water Circulating Pumps

o Weinmann, single-stage horizontal split-case centrifugal type, 300 mm x 250 mm suction and discharge diameter, each driven by;

▪ 93.25 kw Electric Motor

▪ 3- phase, 230/460 volts, 1775 rpm

• 2- Bunker Oil Storage Tanks

o Mild steel plate of welded construction, 12.20 m diameter x 13.50 m high, 1,300,000 liters capacity, vertical cylindrical tank, mounted on concrete foundation, complete with spiral stairs, volume indicator, manhole and other standard accessories

• Filter

o Toyo Filter, 150 psi, flange bolted

• Diesel Storage tank

o Mild steel plate of welded construction, 4.84 m diameter x 6.50 m high, 100,000 liters capacity, vertical cylindrical tank, complete with standard accessories

• Lube Oil Storage Tanks

o Mild steel plate of welded construction, 3.86 m diameter x 4.55 m high, 50,000 liters capacity, vertical cylindrical tank, complete with standard accessories

• 2- Oil Pumps

o Daito Kogyo, Japan, Type KHR-10-40, rotary gear type, 50 mm suction and discharge diameter, driven by;

▪ 1.50 kw Electric Motor

▪ 3-phase, 230 volts

• Oil Pump

o Daito Kogyo, Japan, Type KSR-25-90, rotary gear type, 75 mm suction and duischarge diameter, driven by;

▪ 5.50 kw Electric Motor

▪ 3-phase, 220 volts

• 2- Oil Heaters

o Mild steel plate of welded construction, shell and tube type, with aluminum claddings, 450 mm diameter x 1500 mm length

• Oil Pump

o Daito Kogyo, Japan, Type KSR-10-4, rotary gear type, 50 mm suction and discharge diameter, driven by;

▪ 1.5 kw Electric Motor

• 3-phase, 220 volts, complete with control and other standard accessories

• Oil Transfer Pump

o Daito Kogyo, Co., Ltd., rotary gear type, Type KSR-25-120, 75 mm suction and discharge diameter, driven by;

▪ 7.46 kw Electric Motor

▪ 3-phase, 220 volts, 1750 rpm, complete with control and other standard accessories

• 2- Fuel Oil Purifiers

o Mitsubishi Chemical Machinery Mgf. Co. Ltd. Self-Jector, Type SJ8000, 8000 liter/hr capacity, 5000 rpm, driven by;

▪ 15 kw Electric Motor

▪ 3-phase, 230/460 volts

• 3- Fuel Oil Purifiers

o Mitsubishi Chemical Machinery Mgf. Co. Ltd. Self-Jector, Type SJ6000, 6000 liter/hr capacity, 5500 rpm, driven by;

▪ 11 kw Electric Motor

▪ 3-phase, 230/460 volts

• Oil Separator Tank

o Reinforced concrete construction, 9.0 m L x 2.40 m W x 2.0 m depth, 3 compartments, with stairs

• Oil Sump Pit

o Reinforced concrete construction, 1.20 m x 1.20 m x 2 m depth, equipped with;

o 2- Oil Transfer Pumps

▪ Rotary gear type, 50 mm suction and dischagre diameter, driven by;

• 1.5 kw Electric Motor

• 3-phase, 230 volts, complete with standard accessories

• 2- Sludge Tanks

o Mild steel plate of welded construction, 2.0 m diameter x 6.0 meters length, cylindrical horizontal tank, with steel support

• Diesel Service Tank

o Mild steel plate of welded construction, 2.40 m diameter x 3.0 meters high, vertical cylindrical tank, complete with standard accessories

• 2- Bunker Settling Tanks

o Mild steel plate of welded construction, 2.40 m diameter x 3.0 meters high, vertical cylindrical tank, complete with standard accessories

• 2- Bunker Service Tanks

o Mild steel plate of welded construction, 2.40 m diameter x 3.0 m high, vertical cylindrical tank with aluminum claddings and rockwool insulation, electrically and steam heated with 20 kw electric heater, complete with standard accessories

• 2- Bunker Oil Transfer Pumps

o Daito Kogyo, Japan, rotary gear type, driven by;

▪ 230/460 volts, 7.5 kw Electric Motor

▪ 3-phase, complete with standard accessories

• 2- Diesel Transfer Pumps

o Daito Kogyo, Japan, rotary gear type, driven by;

▪ 3.7 kw Electric Motor

▪ 3-phase, 230/460 volts, complete with fuel filter and other standard accessories

• 6- Lube Oil Purifiers

o Westfalia Separator ( S.E.A. ) Pte. Ltd., Type OSC15-96-067/15, 11500 rpm bowl speed, 2650 li/hr capacity, driven by 8 kw electric motor, 230 volts, 60 hz

• 6- Fuel Oil Booster Pump Assemblies

o Rotary gear type, 1.5 kw rating with steam and electric heaters and flow meters

• 6- Fresh Water Coolers

o Mild steel plate of welded construction, shell and tube type, 750 mm diameter x 2400 mm length, cylindrical type

• 6- Lube Oil Coolers

o Mild steel plate of welded construction, 750 mm diameter x 2100 mm length, with insulation and claddings

• 3- Lube Oil Coolers

o Mild steel plate of welded construction, 762 mm diameter x 1500 mm length, cylindrical type, with insulation and claddings

• 3- Lube Oil Coolers

o Mild steel plate of welded construction, 762 mm diameter x 2000 mm length, cylindrical type, with insulation and claddings

• 6- Fresh Water Pumps

o Horizontal single stage centrifugal type, 200 mm suction and discharge diameter, each driven by;

▪ 45 kw Electric Motor

▪ 3-phase, 220 volts, 1780 rpm

• 6- Lube Oil Filter Sets-Alfa Laval Moait Inc., Model T.280D.50.8.A.05, complete with standard accessories

• 6- Generator Local Control Boards

• 6- Generator Fuel Oil Filters

• 5- Air Cylinders

• Mild steel plate of welded construction, 900 mm diameter x 2400 mm high

• 6- Expansion Tanks-Mild stell plate of welded construction, 500 mm x 500 mm x 1000 mm

• 9- Emergency Lube Oil Tanks-Mild steel plate of welded construction, 900 mm diameter x 1200 mm high

• 2- Lube Oil Purifiers-Mitsubishi Chemical Machinery Mfg. Co. Ltd., Self-Jector, Type SJ-6000, 6000 liters per hour capacity, driven by;

o 11- kw Electric Motor

o 3-phase, 230/460 volts

• 3- Heat Exchangers-FC, Niigata Engineering Co., Ltd., 40 sq m cooling surface

• 3- Lubricating Oil Coolers-Fujitsu, Japan, Type OC, 1977 year mfd., 60 sq m cooling surface

• 6- Exhaust Fans-Penn Ventilator Co., Model BAT60, 1524 mm blade diameter, 61,965 GPM capacity, each driven by 15 kw electric motor

• Injector Tester-Merlin, Model S400A (Note: At Injection Room)

• Merlin Lapping Machine

• Merlin Ultrasonic Cleaner

• 2- Valve Seat Grinding Machines-Chris Marine, Type MSD

• Valve Spindle Grinding Machine-Chris Marine, Type 75H

• Honing Machine-Chris Marine, Type S31/49

• 6- Intake Air Filters-Japan Air Filter Co., Ltd., Type DD-No. 10-10, multi duty, 2 columns, 1100 cu m/min capacity, with wire mesh, 1500 mm diameter x 1500 mm high, cylindrical, reinforced concrete housing

• 3- Water Pumps-Horizontal single stage centrifugal type, driven by 0.746 kw electric motor

• Overhead Traveling Crane-Single girder, approximately 18 meters wide span, equipped with;

o Electric Hoist

o Kuli, 5 tons capacity

• Overhead Traveling Crane-Double girder, 18 meters wide span x 88 meters length runway, equipped with;

o Electric Hoist

▪ P & H, 70 tons capacity, complete with controls and other standard accessories

• System complete with plant exhaust and cooling water pipings, plant electrical wirings and cables, structural framings and supports and other standard accessories

PHASE II

15 MEGAWATTS DIESEL ELECTRIC POWER PLANT EQUIPMENT

3 x ZG0DA-Sulzer 12ZV40/4B 6.18Mw HFO 12- Cylinder Diesel Engine 6600V

Scope of Supply

A.C. Electric Generator Set ( Nos. 7,8,9 )

Number: 3

Manufacturer: Ideal Electric Co., Mansfield, Ohio, U.S.A.

Type: SAMB

Rating: 6250 kva (5000 kw)

Amps: 547

Volts: 6600

Phases: 3

Power Factor: ,08

Year Mfd: 1974

28- Cylinder Diesel Engine

Number: 6

Manufacturer: Zut "ZG0DA" S.A. Swietochlowice, Poland

Model: ZG0DA-Sulzer 18PC2-5V

Nominal Power: 6180 kw

Speed: 514 rpm

Turbo charged

Serial Nos.

Genset Alternator Engine

No. Serial No. No.

7 31091-01

8 931091-02

9 931091-03

total running hrs as of 6/30/2006 as follows:

Engines no. Total Running Hrs. 

Engine # 7: 37,246.15

Engine # 8: 38,171.33

Engine # 9: 37,878.11

[pic]

[pic]

3- Exciters

Ideal Electric Co., Type FRBA, 50 kw output, 250 DC volts, 200 DC amps and 125 field volts, 87 field amps, mounted on massive concrete foundation

(Note: Generator Set No. 8 due for overhauling )

AUXILIARY EQUIPMENT

2- Waste Heat Recovery Boilers

Vapor Phase, Model RCXSV-72183

Auxiliary Boiler

Cleaver Brooks, CB packaged boiler, Model CB600-100, Serial no. L-99083, 150 psi max pressure, 11/26/99 date mfd., 418,500 Btu/hr capacity, complete with standard accessories

Condensate Tank

No nameplate, insulated type, equipped with;

2- Condensate Pumps

Aurora, Model 3VF56T34F55STDF, driven by 0.373 kw electric motor, 3450 rpm, 230/440 volts

Deaerator Tank

East Fabrication, Inc., steel construction, SA516.70 material, 6.35 mm shell and head thickness, 300 gallons capacity, 50 psi @ 300degrees fahrenheit working pressure, equipped with;

2- Deaerator Pumps

Grundfos, Type CR2-100UGA-AUUE, 4000 li/hr capacity, driven by electric motor

2- Deaerator Make-up Water Pumps

Grundfos, Type CR2-100UGA-AUUE, 4000 li/hr capacity, driven by electric motor

Condensate Sub-cooler

Vapor Phase Eng'g., Model EPU-2X, equipped with 2.2 kw electric motor, 860 rpm, 230/460 volts

4- Diverter Valves

Pneumatic operated

8- Exhaust Gas Isolation Valves-Pneumatic operated

3- Graviner Oil Mist Detectors

Jacket Water Recovery Tank

HDPE construction, polyethelene material, 6000 liters capacity

Jacket Water Recovery Pump

MP Pumps, Model 26623, driven by 3.73 kw electric motor, 3450 rpm, 230/440 volts

Fuel Leakage Recovery Tank

Mild steel plate of welded construction, approximately 8000 liters capacity

Fuel Leakage Recovery PumpRoper Pump, Type 1, driven by 2.2 kw electric motor, 1720 rpm, 220/440 volts

Foam Tank

Polyethelene construction, approximately 1200 gallons capacity, equipped with;

Foam Concentrate Pump

Blackmer, Model FFNP2C, 50 gals/min capacity, driven by 11.19 kw electric motor

Foam Pump Controller

Firetrol, Model FTA750-B-A-15-B-LN-E

Domestic Water Tank

Stainless steel of welded construction, , approximately 1524 mm diameter x 3048 mm high

Sludge Treatment System

Westfalia Separator AG, complete with bowl, centripetal pump, feed pump ( Note: Cannibalized )

3- Hot Water Circulating Pumps

Model Lowara, Type SY202F03, 21.5 TDH, Driven by 0.37 kw electric motor, 2900 rpm

3- Brazed Plate Heat Exchangers

Swe, Swiden, Type B25032, 185 degrees centigrade max working temp., 30 bars working pressure, 39 bars max test pressure

6- Supply Pumps

IMO/IMO AB, Stockholm, Sweden, Type IMO ACE025L2NTBP, 1920 li/hr capacity, 4 bars, each driven by 1.3 kw ABB induction motor, 3-phase, 3450 rpm

6- Circulating Pumps

IMO/IMO AB, Type IMO ACE032N2NTBP, 5400 li/hr capacity, 4 bars, each driven by 2.5 kw ABB induction motor, 3-phase, 4.7 amps, 440/480 volts, 3470 rpm

6- Electric Heaters

Lingbo Production AB, Sweden, Model Heatpac / Alfa Laval, Type Heatpac EHM, 56 kw, 180 degrees centigrade/356 degrees fahrenhheit max working temperature, 1.5 MPA/15 bars max working pressure, 22.5 bars test pressure, each driven by 56 kw electric motor, 440 A.C. volts

3- Automatic Filters

Alfa Laval, Model F6MV/FSMN-150RN-16/8A05, 15 bars max working pressure, 160 degrees centigrade max working temperature

3- Viscocity-Sensor/Transducers

Alfa Laval, Model EVT-10, 40-20MA output, 24/48 volts, with control unit, Model VCU-160L

3- Jacket Water Heaters

Triac Commercial and Industrial Sales, driven by 70 kw, 3-phase induction motor, 440 volts

3- Jacket water Heater Pumps

Crane Deming Pump, centrifugal type, 102 mm x 76.2 mm suction and discharge diameter, each driven by 30 kw U.S., 3-phase induction motor, 230/460 volts, 96/48 amps, 1775 rpm

3- Jacket Water Coolers

Alfa Laval, Type M10-MFML, 52 plates, 10 bars max working pressure, 80 degrees centigrede max woking temperature

3- Lube Oil Coolers

Alfa Laval, Type M15-BFMI, 132 plates, 5 bars max working pressure, 80 degrees centigrade working temperature

3- Lube Oil Purifiers

Westfalia Separator (S.E.A.) Pte. Ltd., Type OSC15-96-067/15, 11,500 li/min bowl speed, 2650 li/hr capacity, driven by 8 kw electric motor, 230 volts, 60 hz

3- Primary Lube Oil Filters

Boll and Kirkch Fitterbalu GMbH, Type 6.41.07DN150, 6.5 bar max working pressure, 50-60 degrees centigrade max working temperature, 34 microns

3- Secondary Duplex Lube Oil Filters

Boll and Kirkch, Type 2.05.5.340.500DN150, 6.5 bars max working pressure, 55 degrees centigrade max working temperature, 2 x 50 DM3 volume, 60 microns

3- Starting Air Receivers

Ingersoll Rand, Model V8, vertical air receiver type, 914 mm diameter x 2316 mm high, 1.5 cu m capacity, 500 psig working pressure

3- Dry Air Receivers

Ingersoll Rand, Model V8, vertical type, 305 mm diameter x 686 mm high, 50 liters capacity, 200 psig test pressure

3- Refrigerated Compressed air Dryers

Ingersoll Rand, Model DXR140-T, 250 psig max inlet air pressure, 130 degrees fahrenheit max inlet air temp, 0.75 kw drive, single phase, 208/230 volts

2- Control Air Compressors

Ingersoll Rand, Model T30, 3- cylinder reciprocating piston type, belt driven by 22.38 kw electric motor, mounted on air receiver tank, complete with controls and other standard accessories

Service Air Compressor

Ingersoll Rand, Model 30T, 3- cylinder reciprocating piston type, belt driven by 22.38 kw electric motor, mounted on air receiver tank, complete with controls and other standard accessories

3- Starting Air Tanks

Mild steel plate of welded construction, 1828 mm diameter x 2300 mm high, vertically mounted, complete with standard accessories

3- Lube Oil Priming Pumps

Roper Pump, gear type, each driven by 15 kw Weg electric motor, 220/440 volts, 50/25 amps, 1760 rpm

3- Lube Oil Purifier Feed Pumps

Varisco, Italia, Type V25SPG, each driven by 1.10 kw CMG electric motor, 440 volts, 8 amps., 840 rpm

3- HFO Ring Pump and Fuel Recovery Pumps

Roper Pump, Type 2AM16, each driven by 2.2 kw Weg electric motor, 220/440 volts, 8.8/4.4 amps, 1720 rpm

2- HFO Purifier Module/Centrifuge

Alfa Laval, Type MAPX313T-24-60, driven by 15 kw Western Electric, 3-phase induction motor, 440 volts, 26.6 amps., 1760 rpm

Feed Pump

Varisco, Type V30.25T5W, driven by 1.5 kw CMG induction motor, 3-phase, 440 volts, 1140 rpm

Sludge Pump

Warren Pump, Model Sandpiper EEI-SM, Type TE-3-A, airpower drive

Jacket Water Priming Pump

Lowara, Model SV1602F22, driven by 2.2 kw electric motor, 2900 rpm

Water Heater

Thermal Electric Elements, 100 kw capacity, 440 volts

3- Automatic Air Filters

Locker Air-maze Ltd., Model 5-27 automaze 600EM, 27,680 cfm capacity

4- Raw Water Pumps

Crane Deming Pump, 1900 gpm capacity, 127 TDH, each driven by 75 kw U.S. electric motor, 3-phase, 230/460 volts, 240/120 amps

4- Cooling Towers

Liang Chi Industry Co., Ltd., Model LBC-1000, 175,000 cu ft/min air volume capacity, 22.4 kw fan motor drive, mounted on reinforced concrete basin, complete with controls and other standard accessories

3- Sump Tanks

Mild steel plate of welded construction, 1.8 m x 2.4 m x 1.5 m H overall dimension

Settling Tank

Mild steel plate of welded construction, 23,000 liters capacity

Service Tank

Mild steel plate of welded construction, 23,000 liters capacity

3- Exhaust Fans

Pemn Ventilator Co., Model BAT60, 1524 mm blade diameter, 61,965 cfm capacity, each driven by 15 kw electric motor

Waste Water Treatment Plant

Jowa Sludge Treatment Unit, with oil content meter and alarm system, 32 cu m/day flow rate capacity, complete with controls and other standard accessories

System complete with plant exhaust and cooling water pipings, plant electrical wirings and cable, structural framings and supports and other standard accessories

[pic]

[pic]

POWER SUBSTATION

ELECTRICAL POWER SUBSTATION

Power Transformer

Shanghai Transformer Work, Peoples Republic of China, Model SF-30,000/110, Serial no. 33001-1, 1993 year mfd., oil-immersed type, 30,000 kva capacity, 115 kv primary/6.60 kv secondary voltage

Power Transformer

Shanghai Transformer Work, Peoples Republic of China, Model SF-30,000/110, Serial no. 33001-2, 1993 year mfd., oil-immersed type, 30,000 kva capacity, 115 kv primary/6.60 kv secondary voltage

Power Transformer

Shanghai Transformer Work, Peoples Republic of China, Type SF7-20000/110, Serial no. 42006-1, 1994 year mfd., oil-immersed type, 20,000 kva capacity, 115 kv primary/6.60 kv secondary voltage

2- Steel Masts

Steel framed, dip-galvanized, lattice framing, 2 columns

3- MOCB Power Breakers

1200 amperes, 115 kv

Pneumo Hydraulic Operating Mechanism

XDFROC

3- Neutral Grounding Resistors

Isolating Transformer (For Black Start)

Powertech Corporation, Serial no. J105A07, dry type, 500 kva capacity

Isolating Transformer (Standby)

Philtrans, dry type, 500 kva capacity

Transformer (Machine Shop)

Dry type, 40 kva capacity

3- Current Transformers

115 kilovolts

3- Lightning Arresters

115 kilovolts

3- Potential Transformers

115 kilovolts

4- Disconnect Switches

115 kilovolts, 3 gang

System complete with wirings, cables, connectors, perimeter cyclone fence and other standard accessories

Switching Station Equipment (At Napocor Substation)

consisting of;

6- MOCB

1200 amperes, 115 kv

6- Current Transformers

Multi-tap, 115 kv, 600/5 ratio

6- Potential Transformers

115 kv/110 V

6- Ligthning Arresters

115 kv

6- Disconnect Switches

115 kv

Complete with wires, cables, connectors, perimeter fence of concrete hollow block wall with barbed wires and other standard accessories

Electrical Equipment

consisting of;

Power Transformer (Cooling Tower)

Delta Star Power Engineering, oil-immersed type, 750 kva capacity, 6600 volts primary, 480 volts secondary, 3-phase

Power Transformer (Near Admin)

The Second Transformer Works of Changzhou, Type S7-1200, oil-immersed, 1200 kva capacity, 6600 volts primary, 34.50 kv secondary, 3-phase-(Note: Uninstalled)

Transformer

Taw Custom Equipment U.S.A. Manetech Tech. Corp., Serial no. 1690D1096794, dry type, 1500 kva capacity, 6.6 kv primary voltage/480 volts secondary voltage

Metering Switchboard

Fuji Electric, 1974 year mfd., free standing, metal clad enclosure, 12 vertical sections, consisting of;

4-Power Relays

Fuji, Type WJ4PF-1

4- Directional Relays

Fuji, Type WR2PF-2

4- Latching Relays

Fuji

4- Auxiliary Relays

Fuji

18 EX and AVR Sections

Instrumentation Board

Free standing, metal clad enclosure, 13 vertical sections, equipped with various types and brands of kilovoltmeters, ammeters, pilot light indicators, megawatt meters, MVAR meters, power factor meters, rpm meters, frequency meters, timers, temperature meters, synchroscope meters, impulse watt meters, XMT meters, complete with wiring connections and other standard accessories

Protective Relay Board

Free standing, metal clad enclosure, 13 vertical sections, equipped with various types and brands of percentage differential relays, overcurrent relays, overvoltage relays, directional relays, power relays, group control relays, timers, latch relays, time limiting relays, ground relays, under voltage relays, complete with wiring connections, magnetic controllers and other standard accessories

(Note: Back to back with Instrumentation Board)

Motor Control Center (MCC-A, B, & C) Switchboard

Siemens, Model 95, free standing, metal clad enclosure, 4 vertical sections, 100 amperes, 480 volts, 18 controller sections, unit identified as follows;

Part No. Serial No.

9001-11614-30 30-1440-11614

9001-11614-31 31-1440-11614

9001-11614-32 32-1440-11614

Motor Control Center (MCC-D) Switchboard

Siemens, Model 95, Part No. 9001-11614, Serial no. 33-1440-11614, free standing, metal clad enclosure, 4 vertical sections, 100 amperes, 480 volts, 23 controller sections, unit identified as follows;

Metering Switchboard (Genset No. 7, 8, 9)

Taw Custom Equipment, free standing, metal clad enclosure, 7 vertical sections, complete with relay metering, VCB, and other standard accessories

Boiler Panel Board

Free standing, metal clad enclosure, single vertical section, complete with anunciators, switches and other standard accessories

Repeat Panel Board (Genset No. 7, 8, 9)

Free standing, metal clad enclosure, single vertical section, complete with instrument panels and other standard accessories

Auxiliary Panel Board

Free standing, metal clad enclosure, single vertical section, complete with anunciators, remote controls and other standard accessories

Motor Control Center

RG Transelectric, free standing, metal clad enclosure, 9 vertical sections, complete with various brands and types of magnetic controllers, overcurrent protectors and other standard accessories

Motor Control Center No. 5

Free standing, metal clad enclosure, 9 vertical sections, complete with various brands and capacity of magnetic controllers, over current protectors and other standard accessories

Motor Control Center No. 6

Free standing, metal clad enclosure, 2 vertical sections, complete with various brands and capacity of magnetic controllers, overcurrent protectors and other standard accessories

Switchboard

Free standing, metal clad enclosure, 5 vertical sections, equipped with;

Power Circuit Breaker

2000 amperes, 600 volts, 3-phase

Power Circuit Breaker

Fuji, 1000 amperes, 600 volts, 3-phase

Complete with variuos brands and capacities of magnetic controllers, overcurrent protectors and other standard accessories

Power Transformer

Fuji, oil-immersed, 1100 kva capacity, 6600 volts primary/380 volts secondary, 3-phase

Power Transformer

Fuji, oil-immersed, 500 kva capacity, 6600 volts primary/220 volts secondary

AC 220 Incoming Switchboard

Free standing, metal clad enclosure, 6 vertical sections, complete with variuos brands and capacities of over current protections, magnetic switches and other standard accessories

Low Voltage Switchboard

Free standing, metal clad enclosure, 2 vertical sections, complete with variuos brands and capacities of over current protections, magnetic switches and other standard accessories

2- Battery Charger Nos. 1 & 2

AFA Electro Industrial Systems Inc.

2- Battery Banks

Neutron, 60 batteries each, 100 AH @ 10 HR rate, with steel support

Transformer

Delta Star Transformer, Serial no. 701109-1564, dry type, 10 kva capacity, 480/220 volts

Transformer

Philtrans, Serial no. 9700604, dry type, 440/220/110 volts

2- Engine Control Centers (Nos. 1 & 2)

Free standing, metal clad enclosure, 3 vertical sections, with variuos types, brands and capacities of circuit breakers, magnetic controllers, switches and other standard accessories

Switchboard

Free standing, metal clad enclosure, 18 vertical sections, equipped with;

6- MCOB

Fuji, 1200 amperes, 6.60 kv, 3 poles, complete with variuos types, brands and capacities of circuit breakers, magnetic controllers, switches and other standard accessories

Switchboard

Free standing, metal clad enclosure, 16 vertical sections, equipped with variuos types, brands and capacities of power circuit breakers, over current protections, magnetic controllers, switches, meters and other standard sccessories

Generator Control

Shinko, Type D10GC, 1977 mfd., Type D10GC

System complete with wirings, cables and other electrical installation and accessories

TRANSMISSION LINES

TRANSMISION LINES AND POLES (From Plant to Napocor Substation )

consisting of;

21- Creosoted Wooden Poles

600 mm diameter x 27 meters high, with cross arm, complete with pole hardwares and other standard accessories

6- Concrete Poles

600 mm diameter x 27 meters high, with cross arm, complete with pole hardwares and other standard accessories

Transmission Lines

ACSR 336, 3 wires, 2000 meters, complete with disconnect switch, lightning arresters, insulators and other standard accessories

YARD AND OUTSIDE

FIRE FIGHTING SYSTEM

Fire Pump

Peerless Pump, Model 6AFF18, Serial no. 505961, centrifugal horizontal split case, 16.83 inches impeller diameter, 1500 GPM capacity, 125 psi, 1760 rpm, powered by;

6- Cylinder Deisel Engine

Cummins, turbo charged, water cooled, with silencer, skid mounted

Fire Pump Controller

Metron, Model FD2-FHJ, Serial no. HD-9977823-01, 120 VAC, 50/60 hz, 12 VDC

Jockey Pump

Grundfos, Type CR3, vertical centrifugal type, driven by 3.73 kw Baldor electric motor

System complete with piping connections, foam monitors, fire hydrants, fire extinguishers and other standard accessories

DEEPWELL PUMP No. 2

Grundfos, Model SP120-5, driven by 56 kw electric motor, 5 stages, 500 gallons per minute capacity, 230 meters TDH, 108 meters pump setting, 216 meters depth, 350 mm from ground level to 126 meters and 200 mm from 126 meters to 216 meters casing screen size, complete with controls and other standard accessories

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download