Imperial Japanese - Type 99 Short Rifle Data Sheet - Page 1
[Pages:2]Imperial Japanese - Type 99 Short Rifle Data Sheet - Page 1
Name:____________________ Phone:_______________ Email:____________________
Address:____________________ Date:
City:_______________
(Personal Information is Optional)
State:________ Zip:_______
Series: (Check one) Serial #
0 1 2 3 4 5 6 7 8 9 10 11 12 20 21 22 23 24 25 27 30 31 32 33 34 35 37 40 45
Arsenals: (Check one)
Nagoya Army Arsenal
Kokura Army Arsenal
Toyo Kogyo Corporation
Jinsen Army Arsenal
Tokyo Juki Kogyo
Hoten (Mukden) Army Arsenal
Izawa Rifle Factory
Tokyo Juki Kogyo
Howa Gun Mfgr. Corp.
1. Front Sight Guard (Height measured from top of guard to bottom of sight base) 2. Bore Chromed? A. Yes B. No
3. Nose Cap
A.
B.
C.
D.
A. 1 5/16" B. 1 1/4" C. None D. 1 5/16" E. No Blade
(33.5mm)
(31.65mm)
(33.5mm w/rounded guards)
Large
Small
Dia.
Dia.
1/4" (6mm) 3/16" (5mm)
Solid
No Cap
4. Cleaning Rod Catch
5. Front Barrel Band # on Bayonet Lug:_______
(push-in)
A.
(screw-in)
B.
None
C.
Hole Filled (Stock not
A.
(Stock drilled
(i.e.Izawa) drilled for rod) for short rod)
D.
E.
F.
3 Screws
B.
2 Screws
C.
1 Screw
(Flat top)
D.
E.
Pinned
Pinned
6. Rear Barrel Band 6a. Monopod Attached? A. Yes B. No C. Marks on Stock
B.
M.
N.
O.
C.
D.
E. F. G. H. I.
J. K. L.
20th Series 5th, 6th and Not Drilled
No Rim Wide Band
Rough Welded seam
24th Series 32nd Series
Rt. Side 40th Series
with or without rim or loop
7. Rear Sight
7a. Anti-Aircraft Wings Present?
Fixed Peep Sights
A. YES
B. NO
(Short Ladder
B. (AA wings) C.
7th & 40th)
D.
E.
8. Receiver & Chamber Markings
7b. Rear Sight Collar
A.
(Ramped) B.
(Square)
(Series 40) (Series 7/8)
F.
G.
8a. Chrysanthemum Present?
8b. Matching Dustcover? #____
A. Yes B. Ground C.
9. Recoil Bolt
A.
B.
Struck A. Yes B. No
10. Bolt Handle #_______
A.
C.
(9.5mm)
(19mm)
Plum Shaped
Cast
Dustcover C.
D.
B.
D.
grooves
Other (draw) omitted
(Threaded on
A.
B.
C.
D.
(Square Lug) right side)
Machined
Barrel Shaped
11. Safety Knob #___________
12. Extractor #_______ 13. Bolt Body 13a. Bolt Face
A.
(Long) 4 7/8" A.
Chrome?
(124mm)
(oval)
A. Yes
Knurled Grooved Welded
Welded Welded B.
(Semi-smooth) (Rough) (Smooth)
A.
B.
C.
D.
E.
(Short)
B.
4 1/8"
(105mm)
(round)
B. No
Please Complete Page 2
Send to: Trey Stancil, P.O. Box 275, Hayden, AL 35079-0275 Email: gwsiii@ Rev 12/09 DDM Version: 9e
Imperial Japanese - Type 99 Short Rifle Data Sheet - Page 2
14. Firing Pin Cut #________ 15. Bolt Release 16. Floor Plate Release 18. Handguard
A.
C.
A.
A.
C.
A.
B.
D.
B.
B.
D.
3 - 7/8" 12 - 9/16" (98mm) (319mm)
B.
(Early Kokura numbered the sear)
17. Stock Variations
Thumb-Cut (Jinsen)
E.
4 - 1/2" 12 - 1/2" (114mm) (318mm)
A. F.
2 Drain Holes Finger Grooves
No Holes or Finger Grooves 7th and & 40th Series
C.
B.
Separate Forend with Finger Grooves
5 - 7/8" 12 - 1/2" (149mm) (317mm)
No Drain Holes- Finger Grooves G.
Izawa - Howa
No Grooves - 1 Piece - For D.
C.
Pinned Front Band - Series 7 & 8
Short handguard
H.
Separate Forend w/out Finger Grooves
D.
Early Inletted Stock 1 Piece Stock - Late War Rifle
19. Rear Sling Swivel
A.
B.
I.
Bottom Drain Hole w/ Finger Grooves
17a. Side Drain Hole Filled?
Yes No
Early Inletted Stock -Separate Forend - Late War Rifle
(2 Screws)
C.
(1 Screw)
D.
17b. Bottom Drain Hole Filled?
Yes No J.
20. Buttplate
Side Drain Hole Only
(Hole in Stock)
(Cav Loop)
A.
B.
C.
D.
21. Inspection/Final Assembly Stamps (refer to chart to the left)
Metal (Wide)
Metal (Thin)
Wood (Thin)
Wood (Thick)
Supervisory and/or Factory Inspection Marks (Locations: 3, 4 & 7)
A. B. C. D. E.
F. G. H. I. J.
1
2
5 (Left or Right Side)
3 5
4
8 9
K, L.
M. N.
O.
P. Q. R.
S.
6
7
Partial or Assembly Inspection Marks
Inspection Mark Locations (Please fill out using letter(s))
(Locations: 1, 2, 8, 9, and other parts)
T.
U. V.
W.
X.
1. Monopod Foot:______________ 7. Final Insp. Mark:____________ 2. Monopod Base:_____________ 8. Bolt Inspection Mark(s):______
Y.
Z.
aa.
bb.
cc.
3. Supervisory Insp. Mark:_______ 9. Safey Mark(s):______________ 4. Factory Inspection Mark:______ 10. Firing Pin(not shown):________
dd. ee. ff. gg.
Second Class Marks (found on reciver, stock, bolt etc.)
hh.
ii.
jj.
kk.
5. Second Class Mark(s):________ 11. Extractor(not shown):_________ 6. Series Symbol:______________ 12. Other:___________________ 22. Sling attached? Yes No Is the sling orginal to the rifle?_____ Type of sling (describe):_____________________________________
(2mm)
(4mm) 23. Barrel/Reciver Assembly Number (s):________
Too much trouble
24. Is there Kanji/Number Markings on the Stock or Sling?
Yes No (describe):______________________________
25. Brief history of rifle and/or comments that will add research value?
Send to: Trey Stancil, P.O. Box 275, Hayden, AL 35079-0275 Email: gwsiii@ Rev 12/09 DDM Version: 9e
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- imperial japanese type 99 short rifle data sheet page 1
- for victory through armament research production and supply
- x gunsmithing tools 4d reamer rentals
- 30 06 springfield
- bayonets m1 garand garand collectors association
- canadian forces bayonet
- type 30 arisaka data sheet japanese rifles pistols
- japanese type 99 short rifle
- mossberg 42b military stock original
- mauser patrone 22 long rifle history by serial 15
Related searches
- imperial japanese army rank insignia
- imperial japanese army ww2
- imperial japanese navy rank insignia
- imperial japanese army uniform reproductions
- ww2 imperial japanese navy uniforms
- imperial japanese uniforms
- imperial japanese air force
- imperial japanese navy ww2
- arisaka type 99 rifle parts for sale
- type 99 rifle arisaka value
- imperial japanese ranks
- imperial japanese army air force