DNM 400 - Prime Machine



4406907105650VC 630 5/AX TNC640Product QuoteVC 630 5/AX TNC640Product Quote00 VC 630 5/AX TNC640High Productivity, 5 Axis Simultaneous Vertical Machining CenterThe VC 630 5 axis is designed for a wide range of applications, especially highly complex work pieces. It is capable of full 5 axes simultaneous machining, greatly reducing the need for multiple setups and increasing the precision of the finished component. The powerful, 12,000 rpm high speed spindle provides superior performance in virtually any machining application or material. Productivity can be further enhanced with the addition of factory installed optional equipment such as a 2-station Automatic Pallet Changer, 121 tool magazine and 20,000 rpm spindle motor.Main FeaturesHeidenhain TNC-640 Control with USB Port and 15.1" Color LCD Display5 Simultaneously controlled axes (X,Y,Z,A,C) with high precision, absolute rotary encoders on A and C axesHigh precision, built in spindle design with (18 / 23.5 kW \ 24.2 / 31.5 hp motor, 12,000 rpm)Spindle oil chillerSpindle orientation, load meter, override and rigid tappingCam Type, Double Arm ATC (81 tools) High rigidity, traveling column design with large linear roller guides (X - 45 mm \ 1.772", Y - 45 mm \ 1.772", Z - 45 mm \ 1.772")Servo motors mounted directly to the oversized, double pre-tensioned ball screws (X - 45 mm \ 1.771", Y - 45 mm \ 1.771", Z - 45 mm \ 1.771")Fast rapid traverse rate (X - 40 m/min \ 1,575 ipm, Y - 40 m/min \ 1,575 ipm, Z - 36 m/min \ 1,417 ipm)Z-axis thermal compensation by multiple temperature sensors and proprietary Doosan smoothing algorithms for increased precision630 mm (24.8") diameter T-Slot table surfaceRenishaw probe ready (RMI-Q radio receiver, RTS tool setter and GUI software)Heidenhain Option 40: Dynamic Collision MonitoringHeidenhain Option 45: Adaptive Feedrate ControlHeidenhain Option 48: KinematicsStandard Equipment and Warranty20 bar (230 psi) Through spindle coolant, Air through spindleFlood coolant with large separate coolant tank and way oil skimmer (360 liter \ 95 gallon)Screw type conveyor that pushes chips to the rear of the machine for disposalFull enclosure splash guardTelescopic coversMetered piston distributor lubricationPortable Manual pulse generatorWork light and 3 color tower signal light Two-year machine parts warranty, one-year labor warranty. See warranty pages for details.Two-year control warranty: Parts and LaborInstruction manual, parts list, and electrical drawingsOperation and maintenance manualsPRICE FOR MACHINE AS DESCRIBED ABOVE (Price is F.O.B.: P.O.E.)VC630 5AX with TNC-640 control and 81 ATC$421,000 SPECIFICATIONS:CAPACITY:X axis travel650 mm (25.6")Y axis travel 765 mm (30.1")Z axis travel520 mm (20.5")Table Size (Diameter)630 mm (24.8")Max Work Piece Diameter730 mm (28.74")Max Work Piece Height500 mm (19.685")Max Table Load500 kg (1,100 lbs)Table Surface (No APC, see drawing in back of quote) (5) - 100 mm x 100 mm (M16x2.0)(5) - 3.937" x 3.937" (M16x2.0)SPINDLE:Spindle nose to table top (No APC)210 mm to 730 mm (8.2" to 28.7")Big plus Spindle system CAT 40 Big PlusSpindle speed 12,000 rpmAC Spindle Motor (30 min. rating)18 / 23.5 kW (24.2 / 31.5 hp)Spindle Torque (S6-40%)89.9 nm (66.3 ft-lbs)Spindle Acceleration \ Deceleration time0 - 12k (3.0 sec) \ 12k - 0 (3.0 sec)AUTOMATIC TOOL CHANGER:Number of Tools (Std \ Opt)81 \ 121 Tool ShankCAT 40Pull Stud (Supply Company #)711-23 Max. Tool Dia. \ Adjacent pots are empty80 mm \ 125 mm (3.1" \ 4.9")Max. Tool Length300 mm (11.8")Max. Tool Weight8 kg (17.6 lbs)Tool SelectionFixedTool to Tool1.5 secondMOTION:X axis rapid traverse rate40 m/min (1,575 ipm)Y axis rapid traverse rate40 m/min (1,575 ipm)Z axis rapid traverse rate36 m/min (1,417 ipm)Cutting feed rate (X, Y and Z)1 - 18,000 mm/min (.04 - 787 ipm)Least command increment.001 mm (.0001")Positioning accuracy (Full Stroke)*+/- .005 mm (+/- .0002")Repeatability+/- .002 mm (+/- .000080")A axis motion+30 deg \ -120 degA axis accuracy+/- 10 secA axis max feed rate7,200 deg\minC axis motion360 degC axis accuracy+/- 10 secC axis max feed rate7,200 deg\minGENERAL:Machine Height3,295 mm (130")Floor Space Required (L x W)4,585 mm x 3,200 mm (180.5" x 126")Machine Weight13,500 kg (29,763 lbs)UTILITY:Power required63.1 kVA / 166 amps @ 220vVoltage required - Fanuc205-235 Volts / 3 PhaseTANK CAPACITY:Coolant tank capacity 360 liters (95 gallons)Hydraulic tank capacity 14 liters (3.7 gallons)Hydraulic tank recommended oil (or equivalent) Mobil DTE #24 or Shell Tellus 32Lubrication tank capacity 5 liters (1.3 gallons)Air Required .54 mpa (80 psi) * 8.83 cfm* Geometric accuracies guaranteed only if machine installed on a foundation meeting the minimum requirements of Doosan Machine Tools America. Please see your dealer for the current machine requirements. Construction:BED, COLUMN AND SADDLE:The bed is a rigid, one piece casting made from fine grain Meehanite cast iron with heavy ribbing to help prevent vibration and deformation during heavy cutting. Extra wide spacing of the roller guide ways provide for excellent support of the saddle, regardless of the load distribution on the table. The table is fully supported by the saddle in all positions with no overhang. Featuring a superior, traveling column design; the table, and therefore the work piece, remains locked during machining. This design provides a uniform load to the guideways, ball screws and motors.10629902376170GUIDEWAYS:5763260594360All axes are of a Roller Linear Motion Guide type for higher stiffness, accuracy, and surface finish than more common Ball Bearing Guide types. They are both heavy duty (X - 45 mm \ 1.772", Y - 45 mm \ 1.772", Z - 45 mm \ 1.772") and widely spaced (X - 1,000 mm \ 39.37", Y - 690 mm \ 27.165", Z - 300 mm \ 11.811"). Roller guide ways are 3 times more rigid with 2 times more life than ball bearing guide ways and provide for optimal weight and force distribution.BALL SCREWS AND AXIS DRIVES:Each axis is driven by a high precision double nut ball screw. The ball screws are centered between the guide ways and are supported on both ends by angular contact thrust bearings. This double pretension design provides outstanding positioning repeatability with virtually no thermal growth. All axes have large diameter ball screws (X - 45 mm \ 1.771", Y - 45 mm \ 1.771", Z - 45 mm \ 1.771") that are directly connected to oversize A.C. servo drive motors without gears or belts in order to help eliminate backlash.ROTARY TABLE WITH ABSOLUTE ROTARY ENCODERS ON A and C AXES:The integral rotary table allows for machining on multiple faces of the work piece without having to re-fixture. This allows for reduced number of setups and much higher precision of the finished component. Full 5 axes simultaneous machining allows for extremely complex shapes to be produced which are otherwise impossible with conventional equipment. For example; Impellers, mold and die cavities, 3D surfaces and various medical implants. The A and C axis utilize absolute rotary encoders for higher positioning accuracy (A - +/- 10 sec \ C - +/- 10 sec). 12K SPINDLE & HEADSTOCK:The powerful, 12,000 rpm built-in drive spindle motor has 18 / 23.5 kW (24.2 / 31.5 hp) and 89.9 nm (66.3 ft-lbs) of torque. This design promotes thermal stability and keeps vibration at higher rpm to an absolute minimum. The CAT 40 Big Plus spindle system is a true cartridge type unit supported by high precision, permanently grease lubricated bearings with a spindle Acceleration \ Deceleration time of 0 - 12k (3.0 sec) \ 12k - 0 (3.0 sec). An encoder is attached to the spindle to allow rigid tapping, further increasing productivity.Z-AXIS THERMAL COMPENSATION:Data is collected in real time from multiple temperature sensors around the machine which is then processed through Doosan’s smoothing algorithms. This insures optimum precision over long cycle times where thermal error displacement would otherwise affect work piece quality.Big Plus Spindle System by Big Daishowa LTD:03810The Big Plus spindle system and tooling surpasses all other spindle concepts due to simultaneous taper and flange contact between the machine spindle and tool holder as well as complete interchangeability with existing machines and tools. Upon mounting the tool holder into the machine spindle, contact occurs prior to clamping. Due to the retention force, the taper of the tool holder expands the machine spindle in its elastic range. The tool is pulled further in until the tool flange touches the spindle face for maximum rigidity.Please note: The Spindle Warranty will be VOID if NON LICENSED DUAL CONTACT tooling is used.Visit for more information.OIL JACKET SPINDLE CHILLER:Machine accuracy is maintained by using a refrigeration system that circulates cooled oil around the spindle thereby reducing the thermal effects of any heat generated by the machining processes.20 bar (230 psi) THROUGH SPINDLE COOLANT SYSTEM (TSC):A dedicated positive displacement pump delivers the coolant directly to the tool tip. The immediate benefit is more aggressive feeds and speeds can be maintained throughout the cutting process. There is also no need to stop and adjust coolant nozzles which increases both in cut time and operator safety. Protecting the spindle and the vital rotary union from contamination is a canister filter with a 25 micron replaceable filter element. The 360 liter (95 gallon) tank stores an ample supply of coolant and is isolated from the machine bed to help prevent heat transfer. THROUGH SPINDLE AIR (TSA):Air is supplied to the back of the pull stud and then forced through the tool using the same technique as through spindle coolant by use of M-code. The spindle air blow is commonly used on pre-hardened steel, die and mold cutting, cutting of plastics and anytime coolant would contaminate the work piece such as during the machining of certain medical components.AUTOMATIC TOOL CHANGER:The 81 tool (121 opt) Double Arm ATC provides reliable exchange of tools with a tool to tool time of 1.5 second.RENISHAW? RADIO PROBE READY AND RTS TOOL SETTER:The VC 630 5/AX TNC640 comes equipped with the Renishaw? RMI-Q radio receiver, RTS tool setter and Renishaw GUI software. Touching off tools with the RTS tool setter makes setup quick, simple and accurate. You can also choose to add a spindle probe which offers many advantages over traditional methods of finding part features such as indicators and edge finders. Talk to your dealer for more information on how probing and tool setting can help keep your spindle running and increase your profits.PORTABLE MANUAL PULSE GENERATOR:The hand held Manual Pulse Generator lets each axis move in increments of x1, x10 or x100 making fixture or part alignment quick and easy. The 10-foot cord gives full access to the machine and the magnetic back allows for one handed operation with the MPG being conveniently held in place on the machine table or guarding.21 GIGABYTE SOLID STATE STORAGE DRIVE, USB CARD SLOT AND ETHERNET PORT:The Heidenhain TNC-640 series control is equipped with a USB port as well as an Ethernet port for easy transfer of programs to the control. The standard 21 gigabyte Solid State storage drive can store an unlimited amount of program numbers.FULLY ENCLOSED GUARDING:The fully enclosed guarding is made of heavy gauge sheet metal designed to contain both chips and coolant. Telescopic covers help protect vital slide way areas from contamination and damage.CHIP DISPOSAL AND FLOOD COOLANT SYSTEM:A screw type auger delivers chips to the rear of the machine where they can be collected in a receptacle or delivered to an optional chip conveyor. A separate pump provides flood coolant at the spindle face through adjustable spindle mounted nozzles.LUBRICATION:Automatic lubrication is provided to the guide ways and ball screws by way of a metered piston distribution system which precisely controls the volume of oil to these critical components. A low level alarm prevents the machine from being restarted if there is inadequate oil in the tank preventing possible damage. In order to prevent clogging of these precise nozzles (and possibly damaging the machine), please be sure to use only the recommended oil that is specified in the machine maintenance manual.OPTIONAL ACCESSORIES: Please refer to supplementary document on the iPad for shipping and installation information.Transformers:Part NumberDescriptionList PriceMTAE00375 kVA step down transformer, 480V primary to 220V (multi tap)$3,800MTBB00475 kVA autotransformer - from 208/216/230 for voltage correction$2,050Optional transformers are rated for specific models and may not have sufficient kVA capacity for additional options.? In such cases a larger capacity transformer or separate power drop may be required. Please check with your dealer and option vendor prior to purchase to insure the transformer will work for your application.Chip Conveyors and Related Accessories:Part NumberDescriptionList Price5700-8391LNS\Turbo MH250, micro hinge, rear center discharge filtering chip conveyor with variable speed drive and M-code capability.$13,1006651-8589LNS\Turbo, magnetic conveyor, rear center discharge with variable speed control and M-code capability.$12,5005287-8011LNS\Turbo, hinged belt chip conveyor, rear center discharge with variable speed control and M-code capability.$6,700CC-OPT-02Air Header for LNS\Turbo conveyors (Removes fine chips from belt).$5004800-0700LNS FOX Mist Collector WS2-700 High Efficiency multi-application 3 filtration stage unit to meet or exceed OSHA and NIOSH requirements - 700 CFM, 150mm/6” suction intake at 230V/2.9 Amp. Complete with standard installation kit.$4,330All chip conveyors come standard with 42” discharge height.Models that include a coolant tank require extra labor to install and may add a day or more to installation times. All factory provided pumps, filters, oil skimmers etc. must be transferred to the new tank.Standard hinge belt conveyors are designed for general purpose use and will work for most applications where the majority of chips being generated are not fines.MH250 filtering conveyors have perforated belts and are recommended for applications where a high percentage of fine chips (down to 250 microns), such as those commonly encountered in aluminum, brass and cast iron are being produced. They will also work extremely well for general purpose applications. MF2 filtering conveyors feature a dual belt design which provides the ultimate in both heavy duty and fine chip removal (down to 50 microns). They are ideal for applications that generate powder and sand (such as painted castings) along with metal chips.Magnetic conveyors are only recommended where the machine is being used solely in applications where iron, steel or otherwise magnetic material is being machined.? The chips must be broken; stringy, ferrous material is not suitable for magnetic conveyors.? ?LNS FOX Mist Collectors listed above are designed to mount on top of the machine. If the mount location needs to be on a LNS chip conveyor or other location, please discuss with your local LNS representative prior to purchase for additional pricing and availability.Please discuss with both your dealer and local LNS\Turbo representative prior to purchase to insure you are buying the right conveyor for your needs. If you require a conveyor other than what is listed, please contact Doosan for a quote and lead time. High Pressure Coolant Systems:(DESIGNED FOR WATER BASED COOLANT ONLY – SEE NOTE 1)Part NumberDescriptionList PriceMP-AK-VR8-SDMP Systems AK-VR8-SD. Heavy duty 8 GPM Variable Volume / Programmable high pressure coolant unit with dual 5 micron filtration and 50 gallon reservoir. 4 Multiple pressures may be set through M-Codes from 250 - 1,000 PSI. Includes PLC with display for pump operation monitoring, relay hardware and 4 extra M-codes (Doosan supplied) to trigger pressure settings.$12,350MP-AK-RF8-SDMP Systems AK-RF8-SD. Heavy duty 8 GPM high pressure coolant unit. Adjustable from 250 - 1,000 PSI with dual 5 micron filtration and 50 gallon reservoir. Includes PLC with display for pump operation monitoring.$11,700INSTV-MP-01Installation by MP Systems (optional installation which must be included with original purchase).$2,000CHBL-HV30-CFChipBLASTER Modular* 1,000 PSI, 2-8 GPM variable flow coolant system with integral 100 gallon tan. Hydra-Cell diaphragm style pump for optimal performance with even the harshest materials. A cyclonic style filter vessel provides filtration down to 10 microns without the use of bags or filter cartridges. Includes: Diaphragm Style Pump, HMI, Tank Cleanouts, 8 Preset Speeds/Pressures (4 additional M-Codes required). For additional options see below.$16,850CHBL-JV40The JV40 provides up to 10.5gpm, 1000psi and features ChipBLASTER’s patented Automatically Variable Volume technology along with a 100 gallon coolant tank. The pump and motor speed are controlled by an on-board PLC and variable frequency drive. The pump speeds up when more coolant is needed and slows down when less is needed; all based upon the orifice in the tool being used. This eliminates the wasteful bypassing of coolant that occurs with fixed rate units. Includes: Dual Filters, HMI, Tank Cleanouts, 8 Preset Speeds/Pressures (4 additional M-Codes required). For additional options see below.*$15,800CHBL-J-30ChipBLASTER Modular* 1,000 PSI, 8 GPM fixed rate coolant system with integral 100 gallon tank and dual 5 micron bag filters. Includes: Bag Filters, HMI, Tank Cleanouts. For additional options see below.$10,200CHBL-M30-70ChipBLASTER 1,000 PSI, 8 GPM fixed rate coolant system with integral 50 gallon tank. Includes: HMI, Tank Cleanouts, Diaphragm style pump for optimal performance with even the harshest materials. A cyclonic style filter vessel provides filtration down to 5 microns without the use of bags or filter cartridges. For additional options see below.$9,000CHBL-1800L-UP1800 Liter/450 Gallon Tank$8,000CHBL-D-30-70ChipBLASTER 1,000 PSI, 8 GPM fixed rate coolant system with dual 10 micron pleated cartridge filters.$7,950CHBL-D-30-35ChipBLASTER 500 PSI, 8 GPM fixed rate coolant system with single 10 micron pleated cartridge filter.$6,450CHBL-QFACQuad Filter Autocross. This system automatically will switch from dirty filter “Dual Filter Set A” to filter “Dual Filter Set B” and set off an alarm light alerting the operator that the filter needs to be changed at your convenience. Available on all models except "D" series.$4,400CHBL-900L-UP900 Liter/240 Gallon Tank$4,000CHBL-QFMCQuad Filter Manual Cross. This system will need ball valve manually switched from dirty “Dual Filter Set A” to “Dual Filter Set B” when alarm light alerting the operator that the filter needs to be changed. Available on all models except "D" series.$2,200INSTV-CHBL-01Installation by ChipBlaster (optional installation which must be included with original purchase)$2,000CHBL-FLOWSWITCHMonitors coolant flow, alarms out machine tool if coolant flow is not sensed within set parameters$1,500CHBL-PRESSENSORMonitors coolant pressure, alarms out machine tool if pressure drops below set parameters$1,500CHBL-DIAPRAGHM-UP8GPM at 1000PSI Diaphragm Style (per pump pricing) for J-30.$1,200CHBL-DFACDual Filter Autocross. This system automatically will switch from dirty filter “A” to filter “B” and set off an alarm light alerting the operator that the filter needs to be changed at your convenience. Available on all models except "D" series.$1,100CHBL-WASHWAND5 GPM at 30PSI, 15 ' of hose and coolant gun.$1,050CHBL-65KA65KA electrical upgrade$900CHBL-480L-UP480 Liter/126 Gallon Tank$850CHBL-ADDOUTLETAdditional coolant outlet. Price per outlet.$750CHBL-SKIM2020" oil skimmer for 900L and 1800L tanks$750CHBL-SKIM88" oil skimmer for 380L and 480L Tanks$750CHBL-CHECKVALVEAllows low pressure coolant from machine tool to be plumbed in-line with high pressure for either high or low pressure thru the tool.$350CHBL-QUICKLIDSNo tools needed to remove filter lid$300CHBL-LIGHTOILFor cutting oils less than 140SUS @ 68?F. SDS must be provided to ChipBLASTER.$0CHBL-CYCLONE-UPCyclone Filter eliminates bag filters. Filtration to 2-micron saves time and money by eliminating bag filters. No moving parts to wear out. No filters to change. Just clean filtered coolant down to 2 micron. Available on all models except "D" series.$0High Pressure Coolant Systems – Modular Options:Part NumberDescriptionList PriceCHBL-OIL-ADDEROil compatible heat exchanger for ChipCHILLER.$450CHBL-CYCLNFILTERAdditional Cyclonic Filter available on J-30 and JV-40 units. This option provides sump polishing down to 2 micron for the machine tool tank. This gives your flood and wash pumps the same high level of filtration efficiency as the ChipBLASTER HPC system. Recommended option (see below for pricing): Sludge Settling Tank$3,600CHBL-MBLASTMistBLASTER Modular* 1200 CFM mist collector. Includes 25’ flexible ducting and flange with integral chip deflector for mounting onto machine tool. Electrically interfaced into ChipBLASTER high pressure unit. Ideal for high pressure coolant applications. Water soluble coolant only.$4,950CHBL-MD-34KChipCHILLER Modular* 34,000 BTU coolant chiller interfaced with ChipBLASTER Modular coolant system. Built-in circulation pump supplies chilled coolant to the machine tool even when high pressure is not being used. Integrated error signals and touch screen display for ease of operation. Available only for Variable Volume ChipBLASTER units (HV, JV).$9,250High Pressure Coolant Systems – Standalone Options:Part NumberDescriptionList PriceCHBL-HEPAHEPA filter kit for 1200CFM or 700CFM MistBLASTER. Provides filtration with 99.9% efficiency.$550CHBL-SLUDGETANKChipBLASTER’s sludge tank for use with Cyclone Filtration. Tank traps particulate and keeps it out of the machine tool sump. This specially designed tank traps 85% of particulates down to 2 micron returning clean coolant to the machine tool sump. When the tank gets full of sludge, simply remove the lid and the three baffles and shovel out the sludge.$1,450CHBL-MBLAST700MistBLASTER Modular* 700 CFM mist collector. Includes 25’ flexible ducting and flange with integral chip deflector for mounting onto machine tool. Electrically interfaced into ChipBLASTER high pressure unit. Ideal for high pressure coolant applications. Water soluble coolant only.$3,650CHBL-SACFStandalone Cyclone Filter for sump polishing down to 2 microns. For water based coolants only. For machining of metal only. Recommended option (see below for pricing): Sludge Settling Tank$5,000K-CHBL-34BTUChipCHILLER Standalone** 34,000 BTU coolant chiller with dual 10 micron pleated filters. Built-in circulation pump which supplies chilled coolant to the machine tool even when high pressure is not being used. Electrical starter and breaker included.$10,200Using a high-pressure coolant unit other than those purchased through Doosan will void the warranty on all items associated with the spindle and rotary union coupling.Please review your application with the respective manufacturer prior to ordering a high-pressure coolant unit and related options. Most units will require a separate 3-phase power drop.NOTE ON WATER BASED COOLANT:Doosan machining centers are designed for use with water based coolant fluid only. The use of non-water based cutting oils requires special consideration. Some cutting oils can create excessive heat and affect the accuracy of the machine tool and even damage the machine tool or coolant system which will void the machine warranty. If cutting oil is to be used please discuss the oil viscosity and composition of your oil from your coolant manufacture’s material safety data sheet (MSDS) or the product data sheet (PDS) with Doosan service prior to use. High pressure coolant (HPC) options for non-water based coolant must be reviewed directly by the HPC system manufacturer to determine the correct equipment prior to purchase.Probes:Part NumberDescriptionList PriceK-NC4F300-VC630Renishaw NC4-F300, fixed width, laser tool setting probe. Includes all necessary hardware, software, installation and training. Please note: Maximum tool diameter that will pass through the laser is 9.00" (228.6 mm). Refer to NC4 supplemental quotation sheet for sample installation pictures and more details.$10,250RMP600-40Renishaw RMP600 "strain gauge" spindle probe, CAT 40 tool shank, 100mm probe stylus and hardware.$6,500REN-CAT40CALRenishaw CAT40 tool setter calibration master.$400REN-BT40CALRenishaw BT40 tool setter calibration master.$400REN-RINGGAGESpindle probe calibration ring gage with 2" ID.$300REN-SWAP-BTSHANKBT shank for 60MM body OMP and RMP probes. Required if ordering a machine with the BT shank option. Choosing this option will exchange the standard CAT shank for its BT equivalent.$0600 series spindle probes utilize Renishaw? “strain gauge” technology, which is ideal for measuring 3D part geometries such as those commonly found in 5 axis machining. The 600 series probes also offer improved accuracy with long styli and have unmatched low trigger force. They feature .25 micron repeatability with a maximum recommended stylus length of 200 mm (7.87”).Please contact your local Renishaw? representative or visit for more information.2117725164465BK Mikro Broken Tool Detection System:Part NumberDescriptionList PriceBKMIKRO-ATCMOUNTBK Mikro, tool changer mounted, broken tool detection system. Includes appropriate BK Mikro scanner unit, I\O card and mounting hardware. Checks up to 512 different tool lengths with variation of up to 20 inches. (Installation by dealer)$6,300BKMIKRO-INSTALLTurnkey BK Mikro installation anywhere in US, Canada or Mexico$1,500You can achieve faster cycle times and reduce scrap rate by adding a BK Mikro scanner system to your machine tool. Please visit techna- or contact Stan Tanner at stan.tanner@techna- or 262-367-8665 x 135 for more information.All BK Mikro systems come with a 3 year warranty.Other models are available; please contact Techna-Tool to discuss your specific application and to request a quote.Graphic shown is representative only and may differ from actual installationElbo Controlli Tool Presetters by Koma Precision:Part NumberDescriptionList PriceE346-DEntry level package. Includes E346 presetter with basic spindle pot (ISO 30/40/50), calibration gauge, printer package, training video, and unlimited phone support. (MSRP $14,850)$12,000HATHSIX-DMid-level package. Includes Hathor Six presetter, one universal clamping spindle pot (ISO30/40/50), calibration gauge, printer package, 2 days of on-site training, and unlimited phone and remote PC support. (MSRP $26,850)$24,750*All Presetter packages must be discussed with Koma Precision prior to purchase in order to determine correct model for your machine and application. *By adding an Elbo Controlli presetter to your machine setup and taking tool setting off-line you are increasing spindle run time, increasing tool life, and decreasing scrap rate; All leading to an increase in profitability. Contact Koma Precision to find out how much you can save by off-line tool presetting at 1-800-249-5662.*All Presetter packages include a 2-Year Warranty.*Other models are available. (Models shown are representative only)Factory Installed Options: Part NumberDescriptionList PriceM_SXA-V_ABSX axis glass scale (absolute type, does not require reference on power up but recommended)$6,650M_SYA-V_ABSY axis glass scale (absolute type, does not require reference on power up but recommended)$6,650M_SZA-V_ABSZ axis glass scale (absolute type, does not require reference on power up but recommended)$6,650FO_APC_2PALLET2 station Automatic Pallet Changer (Shower Coolant option will also be automatically selected when adding this option)$59,000FO_20K_SPINDLE20,000 rpm spindle motor. See specifications on following page.$13,000FO_121_ATC121 station ATC$27,000HSK-A63HSK-A63. Please consult product manager for price and delivery. Price varies based on number of tools.$0M_TSK-V_BB4BT-40 tool shank (Please contact DMTA parts department for field retrofit pricing)$0FO_AIRDRYERModel IDF3E external air dryer. Helps to remove moisture from shop air supply.$4,250M_ABW-V_ABWExternal air blow nozzle$2,100M_CLG-V_CLGCoolant gun. For field retrofit, please contact DMTA parts department for price and availability. To add to a factory ordered machine, please contact sales for pricing.$0M_SCT-V_SCTShower Coolant$2,400FO_100BAR_HYDRAULIC_PUMP100 bar maximum, hydraulic pump. Includes pump, solenoid valves, ladder integration and fixture operation panel. For use with hydraulic prepartion option$10,000FO_6PORT_HYDRAULIC_PREP100 bar maximum - 6 port, through the table, hydraulic preparation. Does not include pump, solenoid valves, ladder integration or fixture operation panel. No field retrofit available, factory order only.$5,000M_AFD-V_WSDAuto door with safety edge$7,000M_APF-V_APFAuto power off$1,900M_POW-V_385Transformer (3 PH_AC380V_50HZ)$5,500M_POW-V_406Transformer (3 PH_AC400V_60HZ)$6,000M_REG-V_CEURegulation Specification CE (European Standard)$2,000FO_OPT40_DCMHeidenhain Option 40: Dynamic Collision Monitoring for iTNC-530\iTNC-640. If desired, must be installed at time of machine build.$2,400FO_OPT42_DXFHeidenhain Option 42: DXF Converter for iTNC-530\iTNC-640.$1,200FO_OPT45_AFCHeidenhain Option 45: Adaptive Feedrate Control for iTNC-530\iTNC-640. If desired, must be installed at time of machine build.$7,400FO_OPT48_KINHeidenhain Option 48: Kinematics for iTNC-530\iTNC-640. If desired, must be installed at time of machine build.$2,400Factory installed options must be installed on the machine during assembly at the factory. Machine delivery will be a minimum of three (3) months after order. Schedule depends on both machine and option availability. Please confirm the actual lead-time before ordering a machine with factory installed options.(Optional 20,000 rpm spindle specifications)OPTIONAL 2 STATION AUTOMATIC PALLET CHANGER (Shown with tapped pallets)Miscellaneous Options:Part NumberDescriptionList PriceK-MF-MCODES-4(4) Extra M-Codes. No hardware relays or wiring included; they must be provided by your accessory vendor or purchased directly by the end user. If your application requires more than 4 auxiliary M-Codes, see option MT1-005-CUSTOM-INTERFACE. Please contact the Doosan service department to discuss your project.$0MT1-005-CUSTOM-INTERFACE(1-16) Extra M-Codes. Must purchase the standard (4) M-Code package to order this option, which will bring the total number of spare M-Codes to between 5 and 20, depending on application needs. No Fanuc I\O board, hardware relays or wiring included; they must be provided by your accessory vendor or purchased directly by the end user. Please contact the Doosan service department to discuss your project.$0Pull Studs:Part NumberDescriptionList PriceK-20PC-71123CAT 40 20 pcs, 711-23, coolant through pull studs. High quality, heat treated and black oxide finished.$400K-20PC-32913BT 40 20 pcs, 329-13, coolant through pull studs. High quality, heat treated and black oxide finished.$470Retention Knob Supply & Mfg. is our preferred supplier of pull studs. These are high quality, Made in USA pull studs, which are hardened to RC 56-60, black oxide finished and 100% Magnaglo inspected.Tooling Certificates:Doosan offers tooling certificates up to $10,000 (in $1,000 increments) to purchase with your new machine at a significant discount off of face value. These may be used for tool holders, carbide inserts, milling cutters and virtually all other items in our vendor catalogs with some exceptions, which should be discussed with the appropriate vendor prior to purchase. For amounts larger than $10,000 or to inquire about using tooling certificates for custom tooling and specials, please discuss your application with a vendor representative prior to purchase. SCHUNK Tooling Certificates for Doosan Machining Centers:Doosan offers SCHUNK tooling certificates up to $20,000 (in $1,000 increments) to purchase with your new machine at a significant discount off face value. These can be used for tool holders and related accessories, products from the Vero-S catalog or products from the stationary work-holding catalog (with some exceptions). Please discuss your requirements with a SCHUNK representative prior to purchase.Pallet ShapeMachining ExamplesHeidenhain TNC-640 CONTROL FEATURES ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download