Materia l Safety Data Sheet

MATERIAL SAFETY DATA SHEET 3MTM ScotchcastTM Inline Resin Power Cable Splice Kits (82-A, 82-A1, 82-A2, 82-A3), with 3MTM ScotchcastTM Resin 4 07/09/14

Material Safety Data Sheet

Copyright, 2014, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

PRODUCT NAME: 3MTM ScotchcastTM Inline Resin Power Cable Splice Kits (82-A, 82-A1, 82-A2, 82-A3), with 3MTM ScotchcastTM Resin 4

MANUFACTURER: 3M DIVISION: Electrical Markets Division ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577)

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 07/09/14 Supercedes Date: 04/21/14 Document Group: 08-4951-3

ID Number(s): 80-6109-8155-9, 80-6109-8156-7, 80-6109-8157-5, 80-6109-8158-3

This product is a kit or a multipart product which consists of multiple, independently packaged components. An SDS for each of these components is included. Please do not separate the component SDSs from this cover page. The document numbers of the SDSs for components of this product are:

24-9848-3, 24-9869-9

Revision Changes: Page Heading: Product name information was modified. Kit: Product name information was modified.

DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may

_________________________________________________________________________________________________________ Page 1 of 2

MATERIAL SAFETY DATA SHEET 3MTM ScotchcastTM Inline Resin Power Cable Splice Kits (82-A, 82-A1, 82-A2, 82-A3), with 3MTM ScotchcastTM Resin 4 07/09/14 have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M 3M USA SDSs are available at

_________________________________________________________________________________________________________ Page 2 of 2

SCOTCHCAST RESIN 4 PART B 10/31/14

Safety Data Sheet

Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

Document Group: Issue Date:

24-9869-9 10/31/14

Version Number: Supercedes Date:

5.00 02/14/14

SECTION 1: Identification

1.1. Product identifier SCOTCHCAST RESIN 4 PART B

1.2. Recommended use and restrictions on use

Recommended use Electrical, PART B OF RESIN 4

1.3. Supplier's details MANUFACTURER: DIVISION: ADDRESS: Telephone:

3M Electrical Markets Division 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours)

SECTION 2: Hazard identification

2.1. Hazard classification Acute Toxicity (oral): Category 4. Acute Toxicity (dermal): Category 4. Serious Eye Damage/Irritation: Category 1. Skin Corrosion/Irritation: Category 1B. Respiratory Sensitizer: Category 1. Skin Sensitizer: Category 1B. Reproductive Toxicity: Category 2. Carcinogenicity: Category 2.

2.2. Label elements Signal word Danger

Symbols Corrosion | Exclamation mark | Health Hazard |

Pictograms

__________________________________________________________________________________________ Page 1 of 12

SCOTCHCAST RESIN 4 PART B 10/31/14

Hazard Statements Harmful if swallowed. Harmful in contact with skin. Causes severe skin burns and eye damage. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of damaging fertility or the unborn child. Suspected of causing cancer.

Precautionary Statements

Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. In case of inadequate ventilation wear respiratory protection. Wear protective gloves, protective clothing, and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.

Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF exposed or concerned: Get medical advice/attention.

Storage: Store locked up.

Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations.

2.3. Hazards not otherwise classified May cause chemical gastrointestinal burns.

44% of the mixture consists of ingredients of unknown acute oral toxicity. 44% of the mixture consists of ingredients of unknown acute dermal toxicity.

SECTION 3: Composition/information on ingredients

Ingredient PHENOL, 4-NONYL-, branched N-AMINOETHYLPIPERAZINE

C.A.S. No. 84852-15-3 140-31-8

% by Wt 15 - 40 Trade Secret * 5 - 20 Trade Secret *

__________________________________________________________________________________________ Page 2 of 12

SCOTCHCAST RESIN 4 PART B 10/31/14

REACTION PRODUCTS WITH TRIETHYLENETETRAMINE HEAVY NAPHTHENIC DISTILLATE SOLVENT PETROLEUM EXTRACTS REACTION PRODUCTS WITH TETA AND DGEBA REACTION PRODUCTS WITH ETHER PETROLEUM DISTILLATES TRIS(2,4,6DIMETHYLAMINOMONOMETHYL)PHENOL TRIETHYLENETETRAMINE CARBON BLACK DIETHYLENETRIAMINE (2-AMINOETHYL)ETHANOLAMINE

Trade Secret*

64742-11-6

Trade Secret* Trade Secret* Trade Secret* 90-72-2

112-24-3 1333-86-4 111-40-0 111-41-1

5 - 20 Trade Secret *

5 - 20 Trade Secret *

4 - 10 Trade Secret * 1 - 6 Trade Secret * 1 - 6 Trade Secret * 1 - 5 Trade Secret *

1 - 3 Trade Secret * < 1 Trade Secret * 0 - 0.2 Trade Secret * 0 - 0.12 Trade Secret *

*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret.

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation: Remove person to fresh air. If you feel unwell, get medical attention.

Skin Contact: Immediately flush with large amounts of water for at least 15 minutes. Remove contaminated clothing. Get immediate medical attention. Wash clothing before reuse.

Eye Contact: Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do. Continue rinsing. Immediately get medical attention.

If Swallowed: Rinse mouth. Do not induce vomiting. Get immediate medical attention.

4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects.

4.3. Indication of any immediate medical attention and special treatment required Not applicable.

SECTION 5: Fire-fighting measures

5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.

5.2. Special hazards arising from the substance or mixture None inherent in this product.

Hazardous Decomposition or By-Products Substance Amine Compounds Carbon monoxide Carbon dioxide

Condition During Combustion During Combustion During Combustion

__________________________________________________________________________________________ Page 3 of 12

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download