PRO-SPRAY
M-500
Plastic Bumper Primer Clear (RFU)
PAINTING PLASTICS
Matrix M500 Plastic Primer is a low solid, fast drying, transparent ready for use primer designed to provide adhesion to a wide range of plastics. Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified. M500 Primer should be used only on those plastic parts that have no existing primer or other coating applied.
Use of a 2 component undercoat prior to topcoat is not necessary unless higher build is required. The plastic primer can be topcoated directly.
Identifying Plastic
M500 Plastic Primer can be applied over:
PO = Polyolefin
PP = Polypropylene
PE = Polyethylene
PP/EPDM = Polypropylene/Ethylene propylene diene modified
PP/EPM = Polypropylene/Ethylene propylene modified
TPO = Thermoplastic Polyolefin
NOTE: M500 Primer should not be applied to previouslyfinished (coated) plastic parts.
The easiest way to identify the type of plastic is to look for the Plastic ID symbol the backside of the part.
|[pic] |PETE |
|[pic] |HDPE - high density polyethylene |
|[pic] |PVC - polyvinyl chloride |
|[pic] |LDPE - low density polyethylene |
|[pic] |PP - polypropylene |
|[pic] |PS - polystyrene |
|[pic] |Resins not mentioned above, or a combination of plastics. |
|Symbol & Type |How to identify |Typical Usage |
|PUR, RIM, RRIM Thermoset polyurethane |Usually flexible, maybe yellow or gray, bubbles and|Flexible bumpers. |
| |smokes when attempting to melt. | |
|SMC, UP, FRP Fiberglass |Rigid, polyester matrix reinforced with glass |Rigid body panels, bonnets, wings, spoilers. |
| |fibers, sands finely | |
|ABS (Acrylonitrile Butadiene Styrene) |Rigid, often white but may be molded in any color, |Instrument panels, grilles, trim moldings, |
| |sands finely. Very pungent odor when heated. |consoles, armrest supports, bike fairings. |
|EEBC (Ether Ester Block Copolymer) |Flexible, off-white in color, similar in appearance|Bumper extensions. |
| |to PUR | |
|EMA (Ethylene Meth- acrylic Acid) |Semi rigid, molded in a variety of colors, |Bumper covers. |
| |unpainted | |
|PA Polyamide (Nylon) |Semi rigid or rigid, sands finely |Radiator tanks, headlamp bezels, exterior trim. |
|PC + ABS Pulse (Polycarbonate & ABS) |Rigid, sands finely, usually dark in color |Door skins, instrument panels, bike fairings. |
|PC + PBT Xenoy (Polycarbonate blend) |Rigid, sands finely, usually dark in color |Bumper covers (primarily Ford some Mercedes and |
| | |Hyundai's) |
|PE Polyethylene |Semi flexible melts & smears when grinding, usually|Overflow tanks, inner wing panels, valences, |
| |semi-translucent. |interior trim panels, water storage tanks, gas |
| | |tanks. |
|PP Polypropylene |Semi flexible, usually black in color, melts & |Bumper covers (usually blended with EPDM), inner |
| |smears when grinding |wings, radiator shrouds, interior panels, petrol |
| | |tanks |
|PPO + PA Noryl GTX (Nylon blend) |Semi-rigid, sands finely, usually off-white in |Wings, exterior trim |
| |color. | |
|TEEE (Thermoplastic Ether Ester Elastomer) |Flexible or Semi flexible |Bumper covers. |
|TPE Thermoplastic Elastomer |Semi-flexible, usually black or gray, melts & |Bumper covers, under bonnet parts. |
| |smears when grinding. | |
|TPO, EPM, TEO Thermoplastic Olefin |Semi flexible, usually black or gray in color, |Bumper covers, grilles, interior parts, instrument |
| |melts & smears when grinding |panels. |
|TPU, TPU - Thermoplastic Polyurethane |Flexible, sands finely |Bumper covers, soft filler panels, gravel |
| | |deflectors, rocker panel covers |
MATRIX M500 plastic primer
-----------------------
SAFETY Before using Matrix Products be sure to read all safety warnings. For professional use only by trained painters. Not for sale or use by the general public.
SUBSTRATES Thorough preparation and cleaning is important with plastic components,
Remove silicone mould-release agents and other contaminants with plastics
Cleaner. Apply with scotchbrite ultrafine and scuff
The surface at the same time, rinse and thoroughly dry. Then clean with MPW100
Pre-Paint wipe.
Use A524 unthinned
Supplied ready for use
1.4-1.8mm 3.0-3.7 bar (45-55 psi)
1 double coat
10-15 mins
Before topcoat
[pic]
[pic]
[pic]
[pic]
[pic]
[pic]
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- zicam nasal spray side effects
- zicam nasal spray directions
- zicam nasal spray reviews
- wholesale body spray fragrance
- zicam nasal spray dosage
- does effervescent spray cleaner work
- effervescent spray cleaner reviews
- effervescent spray tablets for cleaning
- zicam spray instructions
- zicam nasal spray warning
- does zicam nasal spray work
- zicam nasal spray active ingredient