MATERIAL SAFETY DATA SHEET



MATERIAL SAFETY DATA SHEET Product Identifier: EVERBRITE

SECTION 1 - PRODUCT IDENTIFICATION AND USE

Product Identifier: EVERBRITE

Product Use: ZINC FREE FLOOR FINISH

|Manufacturer: | | |

|Nypower Industries Ltd | | |

|1330 - Hastings Cr SE | | |

|Calgary, AB T2G-2A3 | | |

EMERGENCY PHONE: (403) 995-2588

SECTION 2 - HAZARDOUS INGREDIENTS

| | | | | | | |

|Hazardous Ingredients | |% | |Cas Num. | |LD50/LC50 of Ingredient |

| | | | | | | |

|Diethylene Glycol Monobutyl Ether | |1 - 5% | |111-90-0 | |Oral: Rat LD50 = 9,210 mg/kg |

| | | | | | |Dermal: Rabbit LD50 = NOT ESTABLISHED |

|Tributoxyethyl Phosphate | |1 - 5% | |78-51-3 | |Oral: Rat LD50 = 9,490 mg/kg |

| | | | | | |Dermal: Rabbit LD50 = Non irritating |

|Acrylic Polymer Emulsion | |10-30% | |N/A | |No data Found |

| | | | | | | |

|Polyethylene Emulsion | |0.1 - 1% | |N/A | |No Data Found |

| | | | | | | |

SECTION 3 - PHYSICAL DATA

|Physical State: | |Odour & Appearance: | |Evaporation Rate: |

|LIQUID | |BLAND/MILKY | |< 0.4 |

|Vapour Pressure: | |Vapour Density: | |Coeff.Water/Oil: |

|< 30 | |< 1 | |N/A |

|Ph: | |Specific Gravity: | |Odour Threshold: |

|8.5-9.5 | |1.028 | |N/A |

|Boiling Point (C) | |Freezing Point: | | |

|100 C | |0 C | | |

| | | | | |

SECTION 4 - FIRE AND EXPLOSION DATA

Flammability: NO

If yes, under what conditions: Not Flammable

Means of Extinguishing: Use extinguishing media appropriate for surrounding fire

|Flashpoint & Method: | |Upper Flammable Limit: | |Hazardous Comb.Products: |

|N/A | |N/A | |N/A |

|Autoignition Temp: | |Lower Flammable: | |Sensitivity to Static Dis |

|N/A | |N/A | |N/A |

|Explosion Data/Impact: | | | | |

|N/A | | | | |

SECTION 5 - REACTIVITY DATA

Chemical Stability: YES

If no, under what conditions: Product is Stable

Incompatability: No

Which Substances: None Known

Reactivity (under what conditions): None

Hazardous Decomposition Products: None Known

Product Identifier: EVERBRITE

SECTION 6 - TOXICOLOGICAL PROPERTIES

Route of Entry: Skin Contact: x Skin Absorption: Eye Contact: x Inhalation: Ingestion: x

Effects of Overexposure (Acute and/or Chronic)

EYES: Direct contact may result in irritation and redness

SKIN: Prolonged and repeated exposure may result in dryness, irritation

INGESTION: May cause G.I. tract irritation

| | | | | | | |

|Exposure Limits: | |Irritancy of Product: | |Product Sensitization | |Carcinogenicity |

|Not Established | |Eye, Skin | |No Evidence | |No Evidence |

|Teratogenicity: | |Reproductive Toxicity: | |Mutagenicity | |Synergistic Products |

|No Evidence | |No Evidence | |No Evidence | |No Evidence |

SECTION 7 - PREVENTIVE MEASURES

Personal Protection Equipment:

Eye wash station and rinsing facilities

| | | | | |

|Gloves (Specify) | |Respirator (Specify) | |Eye (Specify) |

|Rubber for sensitive skin | |Not Req'd | |Chemical goggles |

|Footwear (Specify) | |Clothing (Specify) | |Other (Specify) |

|Safety Shoes | |As req'd to prevent skin contact | | |

Engineering Controls (Spec Ventilation, Enclosed Process etc)

Use in ventilated area if possible

Leak and Spill Procedure

Dike and contain. Collect and re-use if possible. Absorb with inert material. Do not allow runoff into public waterways.

Waste Disposal

Dispose of according to local regulations

Handling Procedures and Equipment

Close container when not in use. Avoid transfer of product

Storage Requirements

Wash thoroughly after handling

Special Shipping Information

Do Not Freeze

SECTION 8 - FIRST AID MEASURES

Specific Measures:

EYES: Flush eyes with water for 15 minutes

SKIN: Wash with mild soap and water

Inhalation: Move victim to fresh air

Ingestion: Do not induce vomiting. Rinse mouth with water, drink water and get immediate medical attention.

IN ALL CASES: If symptoms persist seek medical attention

SECTION 9 - PREPARATION DATE OF MSDS

Prepared By: Nypower Industries Ltd Ph: (403) 995-2588 Date: January 2010

No guarantee is made as to accuracy of the data or statement contained herein. While this information is furnished in good faith, and is accurate to the best of our knowledge, no warranty, expressed or implied, of merchantability, fitness or other use is made. This information is offered only for your consideration, investigation and verification. Nypower Industries Ltd shall not in any event be liable for special, incidental or consequential damages connection with its publication. Likewise, no statement herein shall be construed as a permission or recommendation for the use of any product in a manner that might infringe on existing patents.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download