Upgrade procedure of vault/streamer from ver
Installation procedure of vault/streamer for ver.1.5.1.4.0
Important Notes:
1) All server management connections must be network reachable at the time of configuration.
2) There are sample 1.5.1 configuration files in the appendix section for later comparison
NOTE: hostType is either vault or streamer
ethN is management interface (10.22.216.0 network)
ethM is ingest interface (192.168.100.0 network vault only)
High-level Install Procedure
1. Each server will need to have Linux(RedHat Vallhala 7.3) Installed with the CDS kickstart floppy.
2. The CDS Overlay CD will be installed on each server, and server will be rebooted.
3. The CDSM Overlay CD will be installed on the management server, and server will be rebooted.
4. All systems will be configured using the CDSM User Inteface.
Installation Process (Steps).
Install CDSM Overlay and Configure
a. IP the CDSM as user root:
i. Edit /etc/hosts and enter the server’s IP and the server’s name. Make sure you remove any extraneous host names in the line that includes the loopback and localhost entry
ii. Edit /etc/sysconfig/network and put in the proper hostname and gateway
iii. Edit /etc/sysconfig/network-scripts/eth0 and put in the correct values.
b. Edit the .arroyorc file as user isa:
i. Make sure that “self” is set to the right value (3 for CDSM).
ii. Make sure that the group ID and server ID is correct
iii. GroupID must be the same on each server that is in the group
iv. ServerID must be unique – a good practice is to use the last octet of the management IP
v. Make sure that “partno” is correct – for an CDSM it is 1U-SATA-1
vi. Add line to CDSM .arroyorc “nohealth 1”
vii. Make sure that all replication members are declared. Make sure the local machine’s IP address is not in this file!
c. Make sure the web service is running. There should be the command ‘apachectl start’ in the /etc/rc.local. The easiest way to do this is to open a browser and type the CDSM’s IP address into the URL. If the Arroyo CDSM log in page doesn’t come up, start the web service as user root:
1. /arroyo/www/bin/apachectl start
d. If this is the first time the CDSM has been run, execute the following command as user root:
i. /usr/lib/php4/runonce
This will load default values and logins for the CDSM GUI
Install CDS Streamer and Vault
3 Mount the overlay device in the appropriate file system.
Option 1
In order to allow the USB CDROM capability, you should NOT boot in 2.4.19 linux kernel. Instead during boot, you need to select a different kernel to load. In Grub boot selection – Select 2.4.18-3bigmem – this allows USB CDROM
Option 2
Non Lindenhurst machine will be able to mount cdrom with following command.
insmod usb-ohci
mount /dev/cdrom /mnt/cdrom
Option 3
If you have usb stick, then, boot the system with usb stick, when it comes up, mount the file system on /mnt/usbstick or where ever you are comfortable mounting the file system (the following commands may be different):
insmod usb-ohci
mount –t vfat /dev/sda /mnt/usbstick
- edit inst.sh file
vi /mnt/usbstick/inst.sh
:%s/cdrom/usbstick (comd. replace all occurrence of cdrom with usbstick)
:wq (save and exit)
4 Install the overlay contents.
cd /mnt/cdrom (or the file system where overlay information is mounted on)
./inst.sh isa
5 Reboot server
Configure Each Server for management access.
After 1.5.1.1 overlay is completed and a server is rebooted, the serer must be configured so that CDSM 1.5.1.1 can see the server. Following steps will make a server visible to management controller for this cluster.
Once the CDSM is configured and the avsdb database is running you may proceed to prepare each server in the array.
1) Check /etc/rc.local and make sure arroyo software is not yet set to start on boot. Perform this task as user root.
a. vi /etc/rc.local
b. Scroll down into the file and make sure the following lines are commented out:
# /arroyo/test/streamer/run
# su - isa -c "cd /home/isa/IntegrationTest; ./run_isa --handle_orphan_streams >& /home/isa/IntegrationTest/ns_log&"
# /home/stats/statsd -d eth0
2) IP each server as user root:
a. Edit /etc/hosts and enter the server’s IP and the server’s name. Make sure you remove any extraneous host names in the line that includes the loopback and localhost entry
b. Edit /etc/sysconfig/network and put in the proper hostname and gateway
c. Edit the configuration file for the management interface:
i. For Streamers, Vaults and SSV, edit /etc/sysconfig/network-scripts/ifcfg-eth0 make sure it has the proper network settings
3) Edit the .arroyorc file as user root:
a. Make sure that “self” is set to the right value
i. 0 for SSVs
ii. 1 for vaults
iii. 2 for streamers
iv. 3 for controller
b. Make sure that the group ID and server ID is correct
i. GroupID must be the same on each server that is in the group
ii. ServerID must be unique – a good practice is to use the last octet of the management IP
c. Make sure that “partno” is correct change
i. For a 8Gb vault with 4 cache/fill ports: 4U-SATA-12
ii. For a 8Gb vault with 6 cache/fill ports: 4U-SATA-11
iii. For a 16Gb vault with 8 cache/fill ports: 4U-SATA-10
iv. For streamers: 3U-SCSI-10
v. For 2U SSV: 2U-SATA-10 or 2U-SATA-11
vi. For CDSMs: 1U-SATA-1
d. Make sure the management interface declaration is present and correct:
i. For streamers and vaults and ssv – management eth0
e. Make sure that all replication members are declared, including the CDSM. Make sure the local machine’s IP address is not in this file!
f. Back up all these files along with the setup file as user root:
i. cd /etc/sysconfig/network-scripts
ii. mkdir backup
iii. cd backup
iv. cp ../ifcfg-* .
v. cp ../../network .
vi. cp /etc/hosts .
vii. mkdir streamer ; for vaults, mkdir vault
viii. cp $streamer/* streamer ; for vaults, cp $vault/* vault
ix. cp /home/isa/.arroyorc .
4) Start up the database on the CDSM and load skeleton values for the ISA environment.
a. Switch user to isa
i. su – isa
b. Change directory to the Berkeley database directory:
i. cddb
c. Run the add_isa_env_objects script
i. ./add_isa_env_objects
The ISA environment values do not need to be correct at this time. We will use the CDSM GUI later in this document to insert the correct values.
d. Make sure the values were inserted. Run bsql and check them.
a. su – isa
b. cddb
c. ./bsql
x. 3
xi. 2
xii. 6
5) On all other machines, repeat steps 1 through 3 above then start up the database and ensure that the data has been replicated to the localhost from the CDSM:
d. su – isa
e. cddb
f. ./bsql
xiii. 3
xiv. 2
xv. 6
6) On each server start the statsd process:
a. On streamer and vault the command is ‘/home/stats/statsd -d eth0’
7) On each machine, run the Arroyo config utility to set up some basic information in the Arroyo databases (as user isa or root):
a. ‘/home/stats/svrinit_15 –h rack52 –i 10.11.116.52 –s 255.255.255.0’
System Manager Configuration Procedure
Note: avsdb binary file on management controller must have the same file as the ones on each server
1. Grant Access level to arroyo user
Login as user admin with password admin
Goto Maintain > Users
Select Action = Change Access
Select User Name = arroyo
Select Access = Engineering
Click Submit
Click Logout
2. Access management controller as arroyo user (CDSM)
Log in as user arroyo with password arr0y021
You start in the Maintain > Software > CDSM Setup page
3. Submit Initial CDSM Setup
[pic]
• For “installation”, select desired value, leave all other values as defaults and then click “Submit”
4. Submit System Configurations
Select “System Configs” in “Maintain Software” left panel
[pic]
• Click Submit for Group Map ‘0’ with value “ISA OpenStream”
• Click Submit for Group Map ‘1’ with value “ISA OpenStream”
• Click Submit for License Map with “licensed streams” set to value “6000”. 6000 is the maximum streams a single Stream Group can handle.
• Click Submit for Control IP Map with “control map name” set to value “CONTROLIPMAP:1” and group ID set to value “1”
5. Configure each server
Go to Configure->Server level and select Interface Setup option
[pic][pic][pic][pic][pic][pic][pic][pic]
• Select a server IP from Server IP dropdown box. The dropdown box should include IP addresses for all servers that have been configured in the previous section.
• Select proper attribute/setting for each interface (Cache for the fill only traffic, Stream/Cache for filling/streaming and etc.) On Streamer (eth1) is not used so it should be set to general. Eth0 is used for management. For vault eth1 is for ingest and eth0 is for management.
• Click “Submit” button to save configuration changes. Selecting submit will automatically bring up “Server Setup” contextual page. DO NOT CLICK ANY ITEM IN THE LEFT PANEL. Continue with configuration of server with information applicable to your network environment
[pic]
• Complete all IP information and click “Submit”
6. Configure routing for each server
Go to Configure > Server Level window, select “Route Tables”.
[pic]
• Select a server IP Address and click “Display”
• Enter the Route Table information for each server and click “Submit”
• In a L2 environment you must setup Streamer routing tables to be able to reach the QAMs if the network doesn’t find the QAMs via network ARP.
7. Repeat step 4.4 and step 4.5 for each server in your cluster
8. Configure ISA parameters for array of streamer servers
Go to Array Level > Streamer BMS
[pic][pic][pic][pic][pic]
• Master Streamer IP will be configured later in the section 4.14 “Control/Setup IP” of this document.
• Fill in ALL values and click “Submit”
9. Configure ISA for array of vault servers
Go to Array Level > Vault BMS
[pic]
• Fill in ALL vaules and click “Submit”
10. Configure/Create Stream Group
Go to Configure-> Array Level > Stream Group
[pic]
• If a stream group not already installed, select add new stream group and click on Display button, enter the new group name and click on Submit button.
[pic]
[pic]
• Select the newly created group from the drop down box and click Display. You should see a list of unassigned streamers after you click Display button. If you want to add a server to this group, leave ‘no change” value in the new group field. Click on Submit button to associate servers to the selected group.
11. Configure QAM/s for cluster
Go to Configure-> System Level-> QAM Gateway
[pic]
• Enter QAM IP and QAM MAC or leave MAC empty for Multicast
• Select High or None to associate QAM to a group of servers and then click “Submit”. Do this for each QAM that needs to be configured
.
12. Configure Headend Setup
1. Configure Service Groups
Go to ->System Level-> Headend Setup
[pic]
• Enter value for Service Group Number and click Submit.
• You will add a number in Service Group Number field and after submitting this change, management software creates a service group with syntax “SVCGRP:n:1” or “SVCGRP:n:2”
13. Configure Ingest Tunning
[pic]
• Select the desired Speeds and click “Submit”
14. Control/Setup IP CONFIGURE
Go to Configure > Array Level > Control /Setup IP page. In 1.5.1 all session requests will go primary setup server and stream play will go to control server. This page allows to configure session setup primary. It is like master server in that it process all setup requests and then chooses what streamer to play the session.
[pic]
• Enter Control/Setup IP, Subnet Mask, select Control/Setup IP for IP-Type and click “Submit”
• Change the Control/Setup IP to another IP Address and click “Submit”
• Change the Control/Setup IP back to desired IP Address and click “Submit”
This is a work around for a known issue.
15. Disable Server Offload option for each server
Go to Maintain->Servers->Server Offload
[pic]
• Select an IP address from the Server IP dropdown and click “Display”
• Select “Disable” and click “Submit”
• Do this for each of the servers in the cluster
1. Activate 1.5.1 Servers (Final Step)
Once configuration via management controller is finished, each server should be brought up one at a time. On each server
Uncomment the following entries from /etc/rc.local
su - isa -c “cd /home/isa/IntegrationTest; ./init_isa_env”
/usr/bin/avslauncher >& /root/avslauncher.log& (Only on a Streamer)
/arroyo/test//run
su – isa –c “cd /home/isa/IntegrationTest; …….”
/home/stats/statsd –d eth0
Reboot Server through the CDSM
Go to Maintain > Servers > Server Restart
[pic]
• Select an IP address from the Server IP dropdown and click “Display”
• Select “yes” from the Restart dropdown and click “Submit”
• Repeat this for each server.
Appendix
1) Version of files in 1.5.1.1 server and management controller
first_module.so -rwxr-xr-x 1 root root 683352 Feb 1 20:36
htdocs.tar.gz -rw-r--r-- 1 root root 46230336 Feb 1 20:35
avslauncher -rwxr-xr-x 1 root root 61107 Aug 22 15:43
avs_cserver.o -rw-r--r-- 1 root root 4962322 Apr 7 10:06
avsdb rwxr-xr-x 1 isa isa 1326627 Feb 1 09:
halt -rwxr-xr-x 1 root root 5173 Jan 30 22:32
ISA.tar.gz.r1_5_1v1-isa-2007-01-12-01-rw-r--r-- arroyoqa qa 41522172 Jan 22 18:07
remoteinst.tar.gz -rw-r--r-- 1 root root 4751360 Dec 14 21:06
kernel-2_4_32-2006-12-14-02 linux version 2.4.32avs (gcc version 3.3.2) SMP Thu Dec 14 21:05:54 PST 2006
avs_archive -rwxr-xr-x 1 root root 59 Jan 22 20:00
avs_archive_logs -rwxr-xr-x 1 root root 644 Jan 22 20:00
avs_shutdown -rwxr-xr-x 1 root root 480 Jan 30 22:30
avs_trim_archives -rwxr-xr-x 1 root root 1101 Jan 22 20:00
statsd -rwxr-xr-x 1 root root 325861 Apr 6 17:41
svrinit_15 -rwxr-xr-x 1 root root 12770 Mar 9 15:32
2) Sample Configuration Files for Vaults and Streamers:
/etc/hosts
Vaults:
# Do not remove the following line, or various programs
# that require network functionality will fail.
# This is updated at 2007-02-21 for ISA end-to-end configuration
127.0.0.1 localhost.localdomain localhost
10.22.217.80 SessionGateway
10.22.217.80 Metadata
10.22.217.80 Asset
10.22.217.80 NotificationServer
10.22.217.80 NameServer
192.168.100.109 rack109-ip1
10.22.216.109 rack109
Streamer:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
# This is updated at 2007-02-21 for ISA end-to-end confoguration
10.22.216.109 rack109
10.22.217.80 SessionGateway
10.22.217.80 Metadata
10.22.217.80 Asset
10.22.217.80 NotificationServer
10.22.217.80 NameServer
10.22.216.152 rack152
/etc/sysconfig/network
Vault:
NETWORKING=yes
HOSTNAME='rack109'
GATEWAY=10.22.216.1
Streamer:
NETWORKING=yes
HOSTNAME='rack152'
GATEWAY=10.22.216.1
/etc/sysconfig/network-scripts/ifcgf-eth0
Vault:
DEVICE='eth0'
BOOTPROTO=static
IPADDR='192.168.100.109'
NETMASK='255.255.255.0'
ONBOOT='yes'
Streamer:
DEVICE=eth0
BOOTPROTO=static
IPADDR='192.168.111.152'
NETMASK='255.255.255.0'
ONBOOT=yes
/etc/sysconfig/network-scripts/ifcgf-eth1
Vault:
DEVICE='eth1'
BOOTPROTO=static
IPADDR='192.168.100.109'
NETMASK='255.255.255.0'
ONBOOT='yes'
Streamer:
DEVICE='eth1'
BOOTPROTO=static
IPADDR='10.22.216.152'
NETMASK='255.255.254.0'
ONBOOT='yes'
/etc/modules.conf
Vault:
alias parport_lowlevel parport_pc
alias eth0 e1000
alias eth2 e1000 #for Vault or SSV
alias usb-controller usb-ohci
Streamer:
alias parport_lowlevel parport_pc
alias eth0 bcm5700
#alias eth1 bcm5700 #for Ingest on Vault or SSV
alias eth1 e1000 #for Management on Streamer
#alias eth2 e1000 #for Management on Vault or SSV
alias usb-controller usb-ohci
/etc/rc.sysinit
Vault:
#!/bin/bash
#
# /etc/rc.sysinit - run once at boot time
#
# Taken in part from Miquel van Smoorenburg's bcheckrc.
#
insmod avsutil
# Rerun ourselves through initlog
if [ -z "$IN_INITLOG" ]; then
[ -f /sbin/initlog ] && exec /sbin/initlog $INITLOG_ARGS -r /etc/rc.sysinit
fi
# If we're using devfs, start devfsd now - we need the old device names
[ -e /dev/.devfsd -a -x /sbin/devfsd ] && /sbin/devfsd /dev
# Set the path
PATH=/bin:/sbin:/usr/bin:/usr/sbin
export PATH
……………………
Streamer:
#!/bin/bash
#
# /etc/rc.sysinit - run once at boot time
#
# Taken in part from Miquel van Smoorenburg's bcheckrc.
#
insmod avsutil
# Rerun ourselves through initlog
if [ -z "$IN_INITLOG" ]; then
[ -f /sbin/initlog ] && exec /sbin/initlog $INITLOG_ARGS -r /etc/rc.sysinit
fi
# If we're using devfs, start devfsd now - we need the old device names
[ -e /dev/.devfsd -a -x /sbin/devfsd ] && /sbin/devfsd /dev
# Set the path
PATH=/bin:/sbin:/usr/bin:/usr/sbin
………………….
/arroyo/test/vault/run
dir=/arroyo/test/vault
insmod linuxIAL
#insmod $dir/e1000.o and_interrupt_delay=1953
$dir/starteth
cp $dir/setupfile $dir/requestfile /arroyo/test
sleep 5
insmod $dir/avs_cserver.o #16Gig Vault
#insmod $dir/avs_cserver.o maxphysblocks=491520 #8Gig Vault
while !(test -d /proc/calypso/tunables); do
echo "Waiting to configure avs_cserver"
sleep 1
done
echo 1 > /proc/calypso/test/readarptable
echo 1 > /proc/calypso/test/arp_readroutingtable
echo 1 > /proc/calypso/test/readremoteservers
echo 1 > /proc/calypso/tunables/cm_configurationcomplete
/arroyo/test/streamer/run
dir=/arroyo/test/streamer
insmod aic79xx
$dir/starteth
cp $dir/setupfile $dir/requestfile /arroyo/test
insmod $dir/avs_cserver.o
while !(test -d /proc/calypso/tunables); do
echo "Waiting to configure avs_cserver"
sleep 1
done
sleep 15
#echo 1 > /proc/sys/kernel/kdb_keyboard_break_on
echo 1 > /proc/calypso/test/readstreamloadfile
echo 1 > /proc/calypso/test/readarptable
echo 1 > /proc/calypso/test/arp_readroutingtable
echo 1 > /proc/calypso/test/readremoteservers
echo 1 > /proc/calypso/tunables/cm_configurationcomplete
sleep 5
/arroyo/test/vault/setupfile
# CServer core configuration. Changes to this file require
# a server reboot.
serverid 109
groupid 199198
ingest eth1
management eth2
localip 00a16d86d
cache_dscp 38
cache_ecn 0
streamer 0 vault 1
default source ip 192.169.106.1 tport 0 - 0 cport 0
e1000 adapters: maxrate 965
e1000 1: streaming 1 fill 1 ip 192.169.106.1 tport 0 cport 0 tgid 0
e1000 2: streaming 1 fill 1 ip 192.169.106.2 tport 0 cport 0 tgid 0
e1000 3: streaming 1 fill 1 ip 192.169.106.3 tport 0 cport 0 tgid 0
e1000 4: streaming 1 fill 1 ip 192.169.106.4 tport 0 cport 0 tgid 0
vault mirror copies 2
trickspeedsv2 2 -2 6 -6 10 -10 60 -60
ftpout if eth2 max utilization mbps 0 max sessions 0
test 4
/arroyo/test/streamer/setupfile
# CServer core configuration. Changes to this file require
# a server reboot.
serverid 152
groupid 199198
arrayid 1
management eth1
localip 00a16d898
cache_dscp 38
cache_ecn 0
transport_dscp 46
transport_ecn 0
streamer 1 vault 0
service address 10.22.216.198 setup 3300 control 9000
bms address 10.22.217.80 5000
default source ip 192.168.207.65 tport 0 - 0 cport 0
e1000 adapters: maxrate 965
e1000 1: streaming 1 fill 1 ip 192.169.106.41 tport 0 cport 0 tgid 0
e1000 2: streaming 1 fill 1 ip 192.169.106.42 tport 0 cport 0 tgid 0
e1000 3: streaming 1 fill 1 ip 192.169.106.43 tport 0 cport 0 tgid 0
e1000 4: streaming 1 fill 1 ip 192.169.106.44 tport 0 cport 0 tgid 0
e1000 5: streaming 1 fill 1 ip 192.169.106.45 tport 0 cport 0 tgid 0
e1000 6: streaming 1 fill 1 ip 192.169.106.46 tport 0 cport 0 tgid 0
e1000 7: streaming 1 fill 1 ip 192.169.106.47 tport 0 cport 0 tgid 0
e1000 8: streaming 1 fill 1 ip 192.169.106.48 tport 0 cport 0 tgid 0
e1000 9: streaming 1 fill 1 ip 192.169.106.49 tport 0 cport 0 tgid 0
e1000 10: streaming 1 fill 1 ip 192.169.106.50 tport 0 cport 0 tgid 0
e1000 11: streaming 1 fill 1 ip 192.169.106.51 tport 0 cport 0 tgid 0
e1000 12: streaming 1 fill 1 ip 192.169.106.52 tport 0 cport 0 tgid 0
test 4
/home/isa/.arroyorc
Vault:
# Local settings
self 1
groupid 199198
serverid 109
partno 4U-SATA-1
mirroring 0
mgmtif 2
ingestif 1
nohealth 1
# Database Params
dbtech berkeley
dbsync 2
dbpagesize 65536
dbmemsize 245760000
dbmemsegments 5
dbfsdir /root/db
dbdomsock /tmp/isadb
dbnetport 9999
# Replication Group Members
streamer 10.22.216.152
streamer 10.22.216.197
vault 10.22.216.111
controller 10.22.216.85
Streamer:
# Local settings
self 2
groupid 199198
serverid 152
partno 3U-SCSI-1
mirroring 0
mgmtif 1
ingestif 1
nohealth 1
# Database Params
dbtech berkeley
dbsync 2
dbpagesize 65536
dbmemsize 245760000
dbmemsegments 5
dbfsdir /root/db
dbdomsock /tmp/isadb
dbnetport 9999
# Replication Group Members
streamer 10.22.216.197
vault 10.22.216.109
vault 10.22.216.111
controller 10.22.216.85
/etc/rc.local
Vault:
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# NOT FOR USE WITH LINDENHURST OR IBM. Please comment out setpci
# NorthBridge Tune
setpci -s 0:0.0 cc.b=02
# ISA Kernel Tune
echo 222217728 > /proc/sys/kernel/shmmax
echo 222217728 > /proc/sys/kernel/shmall
echo 65535 > /proc/sys/fs/file-max
# TCP Kernel Tune
echo "8388608" > /proc/sys/net/core/wmem_max
echo "8388608" > /proc/sys/net/core/rmem_max
echo "4096 65536 4194304" > /proc/sys/net/ipv4/tcp_wmem
echo "4096 87380 4194304" > /proc/sys/net/ipv4/tcp_rmem
echo 0 > /proc/sys/net/ipv4/tcp_sack
/sbin/hdparm -d1 /dev/hda
su - isa - c “cd /home/isa/IntegrationTest; ./init_isa_env”
# Streamer Only
#/usr/bin/avslauncher >& /root/avslauncher.log&
#/arroyo/test/streamer/run
/arroyo/test/vault/run
#/arroyo/test/ssv/run
# Streamer and Vault
#su - isa -c "cd /home/isa/IntegrationTest; ./run_isa >& /home/isa/IntegrationTest/ns_log&"
su - isa -c "cd /home/isa/IntegrationTest; ./run_isa --handle_orphan_streams >& /home/isa/IntegrationTest/ns_log&"
# Streamer and Vault
/home/stats/statsd -d eth0
ntpdate 10.22.216.1
Streamer:
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# ISA Kernel Tune
echo 222217728 > /proc/sys/kernel/shmmax
echo 222217728 > /proc/sys/kernel/shmall
echo 65535 > /proc/sys/fs/file-max
# TCP Kernel Tune
echo "8388608" > /proc/sys/net/core/wmem_max
echo "8388608" > /proc/sys/net/core/rmem_max
echo "4096 65536 4194304" > /proc/sys/net/ipv4/tcp_wmem
echo "4096 87380 4194304" > /proc/sys/net/ipv4/tcp_rmem
echo 0 > /proc/sys/net/ipv4/tcp_sack
/sbin/hdparm -d1 /dev/hda
su - isa - c “cd /home/isa/IntegrationTest; ./init_isa_env”
# Streamer Only
/usr/bin/avslauncher >& /root/avslauncher.log&
/arroyo/test/streamer/run
#/arroyo/test/vault/run
#/arroyo/test/ssv/run
# Streamer and Vault
#su - isa -c "cd /home/isa/IntegrationTest; ./run_isa >& /home/isa/IntegrationTest/ns_log&"
su - isa -c "cd /home/isa/IntegrationTest; ./run_isa --handle_orphan_streams >& /home/isa/IntegrationTest/ns_log&"
# Vault & Streamer
/home/stats/statsd -d eth0
ntpdate 10.22.216.1
/etc/grub.conf
Vault:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,0)
# kernel /boot/vmlinuz-version ro root=/dev/hda1
# initrd /boot/initrd-version.img
#boot=/dev/hda
default=0
timeout=10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Linux (2.4.32avs)
root (hd0,0)
kernel /boot/vmlinuz-2.4.32avs ro root=/dev/hda1 console=tty0 console=ttyS0,115200 nmi_watchdog=1
initrd /boot/initrd-2.4.32avs.img
title Red Hat Linux (2.4.18-3bigmem)
root (hd0,0)
kernel /boot/vmlinuz-2.4.18-3bigmem ro root=/dev/hda1
initrd /boot/initrd-2.4.18-3bigmem.img
title Red Hat Linux-smp (2.4.18-3smp)
root (hd0,0)
kernel /boot/vmlinuz-2.4.18-3smp ro root=/dev/hda1
initrd /boot/initrd-2.4.18-3smp.img
title Red Hat Linux-up (2.4.18-3)
root (hd0,0)
kernel /boot/vmlinuz-2.4.18-3 ro root=/dev/hda1
initrd /boot/initrd-2.4.18-3.img
Streamer:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,0)
# kernel /boot/vmlinuz-version ro root=/dev/hda1
# initrd /boot/initrd-version.img
#boot=/dev/hda
default=0
timeout=10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Linux (2.4.32avs)
root (hd0,0)
kernel /boot/vmlinuz-2.4.32avs ro root=/dev/hda1 console=tty0 console=ttyS0,115200 nmi_watchdog=1
initrd /boot/initrd-2.4.32avs.img
title Red Hat Linux (2.4.18-3bigmem)
root (hd0,0)
kernel /boot/vmlinuz-2.4.18-3bigmem ro root=/dev/hda1
initrd /boot/initrd-2.4.18-3bigmem.img
title Red Hat Linux-smp (2.4.18-3smp)
root (hd0,0)
kernel /boot/vmlinuz-2.4.18-3smp ro root=/dev/hda1
initrd /boot/initrd-2.4.18-3smp.img
title Red Hat Linux-up (2.4.18-3)
root (hd0,0)
kernel /boot/vmlinuz-2.4.18-3 ro root=/dev/hda1
initrd /boot/initrd-2.4.18-3.img
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- procedure for cataract surgery from beginning
- list of online jobs from home
- cost of internet only from comcast
- non renewal of lease letter from landlord
- symptoms of brain abscess from tooth
- symptoms of brain infection from tooth
- pictures of the earth from space
- pictures of the world from space
- calculate speed of falling object from height
- timeline of special education from 1800
- diameter of circle calculator from area
- copy of tax return from irs