Www.vendorportal.ecms.va.gov



ITEM NUMBERDESCRIPTION OF SUPPLIES/SERVICESQUANTITYUNITUNIT PRICEAMOUNT0001Ergonomic Office Task Chair 27.00EA____________________________________0002Ergonomic Stool 2.00EA____________________________________0003Exam room Tack Chair 10.00EA____________________________________0004Exam Room Casework with keyboard tray, task light, locking overhead storage, and tool rail 10.00EA____________________________________0005Modular Pharmacy receiving station furniture with task light, locking overhead storage, and shelving 1.00EA____________________________________0006Odular pharmacy Picking station furniture with sloped shelf tops keyboard tray, task light, locking storage, and shelving 1.00EA____________________________________0007Modular pharmacy workstation furniture with task light, paper management, keyboard tray, monitors arms, tack boards, locking overhead storage, and privacy panels 5.00EA____________________________________0008Medication room casework 1.00EA____________________________________0009Overbed tables 3.00EA____________________________________0010Linen Carts2.00EA____________________________________0011Pharmacy Supply carts 3.00EA____________________________________0012Bone Marrow Carts 10.00EA____________________________________0013IV Carts 4.00EA____________________________________0014Clinical Supply carts2.00EA____________________________________0015Delivery and installation during normal business hours1.00EA____________________________________GRAND TOTAL__________________1. Casework and Workstations : Herman Miller Compass and Herman Casework or equal (Exam Rooms): Estimated Quantity: 10Herman Casework or equal (Medication Room 124): Estimated Quantity: 1Herman Miller Pharmacy Picking/Receiving Modular Furniture (Room 151): Estimated Quantity: 2Herman Miller Pharmacy Modular Workstations (Room 153): Estimated Quantity: 5Modular System for Hospital and Outpatient FacilitiesModular System of interchangeable components designed to create application for patient rooms, exam rooms, caregiver work areas and other clinical spaces. Components are easily assembled, removed and re-arranged. 12-year, 24/7 warranty, Parts and Service.Tiles and Components are wrapped in Durawrap, a 99.9% PVC-free material that requires no edge banding Seamless, cleanable, durable surface. Shingled seam between tiles, and components, to prevent the spread of infection.Meets rigorous cleaning requirements of healthcare environments.System allows for all components to be mounted to the wall, to leave the floor clear. Accommodates the utility needs of healthcare environments. Its intelligent infrastructure manages utilities whether pre-piped/pre-wired, stubbed out, or chased from the ceiling. Shelves can be converted to flipper door units.Intelligent Infrastructure: The infrastructure was engineered to accommodate imperfections in construction by allowing the system to be leveled so when walls are not flat or plumb, the final solution looks perfect.Available in various depths, including 13” deep surfaces and integrated sinks. Long Term Value: Modular design and rail system make it easy to swap out modules whether it's a single tile or an entire wall.Infection Prevention: The surface edge with its radius and back cut prevents spilled fluids from seeping into drawers and cabinets.Seamless wrapped surfaces and overlapping tiles minimize the potential for liquids to seep into unseen areas and help control the spread of infection.Warranty: 12-year 3 Shift Warranty , Parts and Service1.01DescriptionSection includes:This section specifies Integrated Care Modular System (IPCMS) as detailed on the drawings, including related components and accessories required to form an integral unit. IPCMS components shown on the drawings but not specified below shall be included as part of the work under this section, and applicable portions of the specification shall apply to these items. Each like item of the IPCMS shall be of the same design and other products that are considered integral to the system shall be manufactured by one manufacturer.Furnish all labor, materials, tools, equipment, and services for all IPCMS components as indicated, in accordance with provisions of Contract Documents.Coordinate this work with work of all other trades.Although such work is not specifically indicated, furnish and install all supplementary or miscellaneous items, appurtenances, and devices incidental to or necessary for sound, secure, and complete installation.1.02Related WorkSection electrical connections plumbing connectionsIntegrated Modular Medical Support System1.03System DescriptionHorizontal RailsVertical RailsTileWork SurfacesSink ModulesCabinets Close-OutsMiscellaneous and Support Accessories1.04References and Quality AssuranceA.ReferencesLaminates shall meet the requirements of PR-046, High-Pressure LaminatesPlastic parts shall meet the HB flammability requirements of UL 94System shall be GreenGuard CertifiedSystem shall meet National Building, Plumbing and Electrical CodesAmerican Society for Testing and Materials (ASTM): A167-94Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and StripShall meet National Fire Protection Association (NFPA)NFPA National electrical Code (NEC)NFPA 99 Health Care FacilitiesNRPA 255ANSI/BIFMA STANDARDSUnderwriters Laboratories (UL)Design CriteriaThe intent of this specification is to provide a quality and functional Integrated Patient Care Modular System in environments that require a high degree of flexibility and where it is anticipated that there will be future changes. The IPCMS’s components must have the inherent qualities of durability, aesthetic value, and safety while being most functional within the healthcare setting.The IPCMS will allow the healthcare facility to be space efficient by making maximum use of vertical space and by providing a highly organized and versatile way of storing materials that are unique to medical requirements and providing an opportunity to provide necessary medical gases and other utilities to the patient.The IPCMS shall take up a minimum of floor space and shall be wall mounted above the floor to facilitate cleaning and housekeeping.The IPCMS shall support the rail hanging components of the Integrated Modular Medical Support System.Installer/Erector QualificationsFurnish proof of familiarity with equipment to be installed.Furnish proof of financial and technical resources to assure prompt performance in delivery and installation and in-service training of healthcare personnel.Provide competent supervision and installation persons.1.05Submittals Shop DrawingsProvide complete shop and installation drawings, giving all dimensions, details of construction, and accessory items. Elevation of service wall(s) showing layout of utilities and access panels, location of all outlets and accessories.Details of mounting for framing, utility piping and wiring shall be provided.Piping and wiring diagrams shall be provided for all utilities.Indicate wall reinforcement and appropriate fastening and method of installation. Provide Owner a listing of components not included in this specification but are required to make the system functional.Elevation of service wall(s) showing layout of utilities and access panels, location of all outlets and accessories.SamplesProvide samples of all finishes and colors as requested by Owner.Project Close-Out DataProvide technical and operational instructions and user’s manuals for all components.Manufacturer’s instructions outlining maintenance requirements.Warranties: See Section 1.08.Minimum of two copies of manufacturer’s complete catalogs and price lists.Location and telephone number of nearest service organization.1.06Delivery Storage and HandlingDeliver all components to site in manufacturer’s clearly identified containers.Deliver, receive, and store in a secured space in a manner to prevent damage.Time deliveries to assure components are available at site when required for installation.1.07Job ConditionsExisting ConditionsAssure that walls scheduled to receive attachment of system components are adequately reinforced to accept installation of this work.Assure that wall, floor, and ceiling work is finished.Report all deficiencies to Contractor for necessary correction.ProtectionAssure that adjoining work is not damaged by installation of this work.Provide temporary protection as required, and repair all damage to such work.SequencingSequence this work to allow work by electrical, plumbing contractors to be performed without interference.Coordinate this work with other operations in same area to avoid conflicts.1.08WarrantyAll warranties run from date of substantial completion.Written warranty on entire system, signed jointly by installer, manufacturer, and contractor for period of twelve (12) years.Written warranty on items incorporated into system, not manufactured by contractor or subcontractor for a period of one year.1.09Quality assuranceApproval by Contracting Officer is required of manufacturer and installer based upon certification of qualifications specified.Manufacturer is regularly engaged in design and manufacture of the types of products and scope similar to the requirements of this project for a period of not less than five years.Installer is approved by manufacturer of products to be installed.Installer has successfully completed at least three projects of scope and type similar to requirements of this project.Construct a mock-up where directed by Owner for the purpose of demonstrating the quality of work and product application to the healthcare environment.Part 2 – Products2.01Integrated Patient Care Modular SystemSingle Source ResponsibilityOther manufacturers desiring approval shall demonstrate compliance of essential characteristics with requirements of this section and contract documents and drawings.Integrated Patient Care Modular System components must be provided by one manufacturer.If products of several manufacturers are used to satisfy this section, then all items shall meet the requirements specified herein.Supplier of the system is responsible for performance of all components.Horizontal RailsWall Raila.Shall provide horizontal interface capability to suspend horizontal and vertical hung components.Shall be available in a minimum of four nominal widths of 24", 30", 48", 60", 72”, 84” and 96”. Please refer to the equipment drawings for specific finishes and sizes.Material shall be anodized aluminum.Shall have available End Caps, Connectors, appropriate Wall Anchors and Anti-dislodgement clips. Shall be capable of supporting a static load of 250 pounds per linear foot.Vertical RailsStilesa.Rail Attached Stiles(1)Available in two heights of 24” and 64”.(2)Can be mounted anywhere along Wall Rails.(3)Supports all types of Tiles and PCMS components.(4)Fabricated of 18 ga. cold rolled steel with a powdercoat finish.(5)Creates a minimum space of 3” to accommodate plumbing, power, data and electrical connections.b. Chase StilesIs 18” high and required for attaching Chase TileShall be 18 gauge steel with a black finish.c.Canopy StilesShall support Canopies that are 24”, 36”, 48” and 60” wide.Shall be 18 gauge steel with a black finish.Shall have available connector kit and lockdown accessories.Tiles – All tiles shall have an overlapping ship-lap design at all horizontal joints to prohibit moisture from wicking behind tiles.Face TileShall be available in nominal heights of 30”, 24” and 40”, widths of 24”, 36” and 48” and depth of .75 inches.Surface material shall be available in Corian? and Durawrap.Shall be available in at least three colors.Shall accommodate work surface supports (Cantilever).Bed TileShall be available in nominal widths of 36” and 48”, height of a nominal 31” and depth of .75 inches.Shall be designed to take the impact of a common patient bed without additional reinforcement.Shall be available in at least three colors.Work Surface TileShall be available in widths of 24”, 36” and 48” and depth of .75 inches.Shall be available in seating and standing heights with and without an integral backsplash.Shall be available in at least three colors.Rotating Work Surface TileShall be a nominal 36” wide and 24” high.Its material shall be Durawrap to prevent moisture from penetrating the tile.Shall accommodate support brackets.Above-Sink TileShall be available in nominal heights of 20” and 40”, width of 24” and depth of .75 inches.Shall be available in at least three colors.Linen Cart TileShall be nominal 24” wide, 24” high and depth of .75 inches.Shall include docking guides.Shall integrate and support a Work Surface with a backsplash.Shall come in at least three colors.Shall accommodate work surface supports (Cantilever).Display Shelf TileShall be available in nominal heights of 30”, 24” and 40”, widths of 24”, 36” and 48” and depth of .75 inches.Surface material shall be Durawrap.Shall be available in at least three colors.Shall support display shelf.Utility Tile, Electrical, LowerShall be available in a nominal 24” high, widths of 24”, 36” and 48” and depth of .75 inches.Shall be available in at least eight configurations including 3-gang cutouts, 2-gang cutouts and various combinations of 2 and 3 gang cutouts. Please see construction documents for exact configurations.Shall be available in at least three colors. Shall provide easy access to electrical boxes.Utility Tile, Electrical, Partial-Height UpperShall be available in nominal heights of 20” and 40”, widths of 24”, 36” and 48” and depth of .75 inches.Shall accommodate various single cutouts. . Please see construction documents for exact configurations.Shall come in at least three colors.Shall be capable of supporting a mounting bracket for a monitor.Shall provide easy access to electrical boxes.Utility Tile, Electrical, Full-Height UpperShall be 20” high and widths of 24”, 36” and 48”.Shall accommodate various single cutouts. . Please see construction documents for exact configurations.Shall come in at least three colors.Shall provide easy access to electrical boxes.Utility Tile, Gas, Partial-Height UpperShall be available in nominal heights of 20” and 40”, widths of 24”, 36” and 48” and depth of .75 inches.Shall accommodate various single cutouts. . Please see construction documents for exact configurations.Shall come in at least three colors.Shall be capable of supporting a mounting bracket for a monitor.Shall provide easy access to gas outlets for maintenance.Utility Title, Gas, Full-Height UpperShall be 20” high and widths of 24”, 36” and 48”.Shall accommodate various single cutouts. Please see construction documents for exact configurations. Shall come in at least three colors.Shall provide easy access to gas outlets for maintenance.Chase TileShall be available in a nominal 25” high, widths of 24”, 36” and 48” and depth of .75 inches.Shall be available in at least three colors.Shall attach to the Chase Tile Stiles.Work Surface General Work Surfacea. Shall be available in nominal depths of 13", and 21" and at least five widths from 24" to 72". Please see contract drawings for exact dimensions.b.Shall be available with or without an integral backsplash. Please see contract drawings for details.c. Shall be available in at least three colors and three finishes including Corian? and Durawrap. Please see contract drawings for specific finishes.d.Shall be a minimum of an 1” thick and capable of supporting 200 pounds.Rotating Work SurfaceShall be available in 34” wide, length of 12” and .75” thickness and capable of supporting 150 pounds.Shall have a rotating arm support painted metallic silver.Shall accommodate seated or standing heights.Shall be available in at least three colors.Sink ModulesShall be available with a nominal width of 24” and depths of 13” and 21”. Please see contract drawings for exact dimensions.Shall have a straight or curved integrated backsplash. Please see contract drawings for exact details.A 4” faucet shall be available that is AC/DC power and has an AC powered faucet sensor, hydro-powered faucet sensor or battery powered faucet sensor. Shall be available with a sink enclosure that is 24” wide and mounts under the sink capable of supporting 150 pound load.Sink enclosure material shall be Durawrap to prevent moisture contamination.Shall have a variety of pull-styles including a flexible pull to limit damage.Shall be available in at least three colors.Storage CabinetShall be available in a nominal height of 20”, 6” deep and widths of 24” and 36”.Shall be available in at least three colors.Shall support a 30 pound load.Drawer Storage UnitShall be 24” wide, 24” high and either 13” or 21” deep.Shall accommodate two or three drawers, with full-extension ball-bearing slidesShall have a variety of pull-styles including a flexible pull to limit damage. Drawers shall accommodate a removable plastic insert to protect against infection.Shall support a load of 100 pounds.Close-OutsSide Shall be available in heights of 24”, 64” and 89”.Shall be available in at least three colors.Sloped Cabinet TopShall be made of steel and angled at 20 degrees to permit cleaning and avoid dust collection.Shall come in depths of 6”, 13” and 21” and in seven widths from 24” to 96”.Shall be available in at least three colors.Shall have a minimal 20 degree angle to decrease dust collection.Utility Support RailShall be available in widths of 24”, 36” and 48”.Shall be able to support 15 pounds per linear foot.Shall be able to support accessory devices such as wire baskets, soap dispensers, otoscope holders and BP cuff devices.Electrical Junction Box Attachment BracketsShall be available to support wall rail.2.04FinishColors shall be selected from manufacturer’s standard line.Colors may be specified to identify areas for materials management.Finishes shall meet the facility’s requirement for infection control.Part 3 – Execution3.01InspectionInspect areas in which work is to be performed for acceptability to receive work.Report all discrepancies to Contractor for correction.Proceeding with work constitutes acceptance of existing conditions.3.02InstallationAssemble and install all items in strict accordance with manufacturer’s printed instructions.Anchor all fixed components firmly, square, level, plumb.Horizontal support elementsInstall at heights indicated with all tops, shelves, and writing surfaces level within 1/8" (3) across width.Vertical support elementsInstall plumb, spaced as indicated on shop drawings.Align slots to assure hanging units are level.Adjust components and system for correct function and operation in strict accordance with manufacturer’s written instructions. 3.03Field Quality ControlRepair, if acceptable, or replace all damaged or improperly operating items.3.04CleaningImmediately after installation and adjustment, clean all surfaces to remove all marks, soil, and foreign matter.Just prior to substantial completion, recheck all components and perform all required additional cleaning.Upon completion, remove surplus materials, debris, tools and equipment.END OF SECTIONThe Casework product line consists of Base Cabinets, Sink Cabinets, Work Surfaces,Storage Cabinets and Overhead Cabinets.Base and Storage Cabinets may be specified open or with shelves, drawers, and doors.Overhead Cabinets may be specified with shelves.Work Surfaces are attached to and supported by the Base Cabinets or can be cantilevered from the Base Cabinet and wall.Base, Storage, and Overhead Cabinets attach directly to an architectural wall.Material SpecificationsCabinetsBase, Storage, and Overhead Cabinets, including the back of the cabinet, use mortise-and tenon joinery and are constructed in a cube design of 3?4" (19) thick standard 45-lb. particle board with melamine on two sides. All visible edges are banded with 2mm edge banding.Cabinet FillerOver-Head Cabinet Straight Filler uses mortise and tenon joinery and is constructed of 3?4"(19) thick standard 45-lb. particle board with HPL on two sides.Cabinet Corner Filler is constructed of 3?4" (19) thick standard particle board with HPL on two sides, edge banding on all edges, and a metal top and bottom.Doors and DrawersDoor and drawer fronts are constructed of 3?4" (19) thick standard 45-lb. particle board withHPL on two sides and 2mm edgebanding on all edges.Drawer bodies use dowel joinery and are constructed of 1?2" (13) thick standard 45-lb. particle board with melamine on two sides. All visible edges are banded.PullsDoor and Drawer pulls are aluminum with a brushed chrome or black matte finish.Drawers and doors specified as no pull, do not come with pre-drilled holes for pulls.ShelvesShelves are constructed of 3?4" (19) thick standard 45-lb. particle board with melamine on two sides. All visible edges are banded. Shelves include plastic adjustable shelf clips.Interior Cabinet AdapterInterior Cabinet Adapter is constructed of 1?2" (13) thick standard 45-lb. particle board with melamine on two sides and Co/StrucR locking drawer bearers attached to interior sides.All visible edges are banded.Vertical Divider InsertVertical Divider Insert is constructed of 1?2" (13) thick standard 45-lb. particle board with melamine on two sides. Dividers are ABS plastic.Work SurfacesWork Surfaces, backsplashes, and sidesplashes are constructed of 45-lb. particle board with HPL on two sides and 2mm-thick edge-banding on all edges for a finished look of1-1/8" (29) thickness.Wilsonart Chemsurf work surfaces have laboratory-grade HPL for high resistance to chemicals and staining.Solid surface work surfaces, backsplashes, and side splashes are constructed of 1/2"(13)-thick solid surface material and 5/8" (16) medium-density fiberboard for a finished look of 1-1/8" (29) thickness.Adjustable GlidesGlides adjust 0-1" and are accessed from inside the cabinet, allowing cabinets to be leveled to accommodate uneven floors.IntroductionToggle Wall Anchors (CO482) are recommended to attach to 5/8" (16) drywall.Attachment of Overhead Cabinets directly to studs or to horizontal backing is also acceptable.Work Surface SupportSupport bracket for cantilevered work surfaces is constructed of 5/8" (16) HPL melamine and .5mm-thick edge-banding on all edges.Sloped TopSloped Top is constructed of 20-gauge cold-rolled steel.CleaningFor normal care and cleaning, wash all surfaces with a soft cloth soaked in a solution of relatively mild detergent and warm water. After washing, rinse thoroughly with clear water, then dry.Standard disinfectants and detergents are acceptable, including 10% bleach solutions.Metric EquivalentsCasework dimensions, metal gauges, and weights are listed both in U.S. measurements and metric equivalents.Dimensions are followed by the metric equivalent in millimeters with the abbreviation(mm) omitted.Metal gauges are followed by the metric equivalent in millimeters with the abbreviation (ga) included.Weights are followed by the metric equivalent in kilograms with the abbreviation (kg) included.InstallationCasework Overhead Cabinets do not require any type of wall backing for proper installation on walls constructed with 5/8" (16)-thick drywall. These cabinets have been tested on both20 ga. and 25 ga. stud walls at both 16" (406) O.C. and 24" (610) O.C. spacings.IntroductionWeight LoadsBase Cabinet Shelf 100 lbs.Base Cabinet Pullout Shelf 100 lbs.Work Surface, Cantilevered 200 lbs.Work Surface, installed directly above Base Cabinet 600 lbs.Storage and OverheadCabinet Shelf 50 lbs.Drawer 50 lbs.Bottle Drawer 50 lbs.Base Cabinet Bottom 450 lbs.ADA Sink Support, wall mounted 200 lbs.Typical Configurations and Weight Loads of Work SurfacesStandardCantileveredBridgeBase Cabinets and ComponentsBase Cabinet, Base Cabinet, ADA-Height,Figure 1GLIDES ADJUST FROM 0"-1"GLIDES ADJUSTED TO LOWEST POINT2'-9 3/16" or 2'-11 3/16" (894mm)1 3/16" LAMINATE/CHEMSURFWORKSURFACEBACKSPLASH - 7/8" CORIANGLIDES ADJUSTED TO LOWEST POINT2'-8" or 2'-10" (862mm)1 3/16" LAMINATE/CHEMSURFMINIMUM 1'-6" (457mm)2'-0" or 2'-10" [864mm]11" or 17”(NOT INCLUDING SLOPED TOP)6'-3 3/16" MINIMUMTO 7'-3 3/16" MAXIMUM HEIGHTArchitectural So_t / NoSo_t or Optional SlopedCasework Top 4 7/8" HighCABINET BOTTOM - 3/4" Architectural Wall5/8" DryWallTOE KICK3 13/16"1' - 6"2' - 0"2' - 6"1' - 6 1/2"2' - 0 1/2"2' - 6 1/2"BACKSPLASH - 3 11/16" CORIANSIDECASEWORK BASE CABINET with 10.5” OVERHEAD3 11/16" LAMINATE / CORIANWORKSURFACE -1 3/16" CORIANThe Base Cabinet are designed as a cube utilizing mortise-and-tenon construction with two side panels, a back panel, bottom, and top panel which is predrilled to accept work surfaces, specified separately.Cabinets can be configured with drawers, shelves, and doors. Side panels are pre-drilled inside at 1-1?4" (32) intervals to accept shelf, drawer, and door hardware.Note:The toe kick depth to the door front is 3.5”D. This includes the door.Sink Base CabinetThe Sink Base Cabinet are designed as a cube utilizing mortise-and-tenon construction with two side panels, a back panel, bottom, and top panel which is predrilled to accept work surfaces, specified separately.Cabinets can be configured with drawers, shelves, and doors. Side panels are pre-drilled inside at 1-1?4" (32) intervals to accept shelf, drawer, and door hardware.Note:The toe kick depth to the door front is 3.5”D. This includes the door. Figure2a is a stainless steel drop in sink for Figure 2b. The service part for theCorian sink bowl is TW23X. The service part for the sink mounting hardware isU1B724L.Undermount sink cut outs to have finished edges, contact a Corian certified installer for details.Base Cabinets and ComponentsSink Base Cabinets and ComponentsAdjustable glides adjust using a 10mm hex driver up to 1-1/2" (31).They are accessed from inside the cabinet allowing cabinets to be leveled to accommodate uneven floors.For architectural integrity, Base Cabinet and Sink Base Cabinet attach directly to architectural wall using hardware appropriate for the type of wall construction.A field-supplied molding should be used to cover the toe kick and recess around the Base and Sink Base Cabinets.Sink Base Cabinets have a cutout in the bottom to allow installation of foot pedals.Foot pedals and plumbing lines must be supplied separately and field installed.Recommended foot pedals:? Chicago Faucets: 625-LP? Water Saver Faucet Co.: L3001LPBase Cabinets and ComponentsSpace Planning for Utilities and PipesSpace for utilities and pipes can be created by using a 30" (762)- deep Work Surface installed on top of a 24" (610)-deep BaseCabinet or a 24" (610)-deep Work Surface installed on top of an 18"(457)-deep Base Cabinet.Base Cabinets and ComponentsADA Sink Support, Wall-Mounted, CG508.ADA Sink Support hangs from an architectural wall to support a5-1/2" (140) maximum-depth sink (supplied separately) and a Corian or other solid- surface work surface. This allows front approach to be in compliance with ADA requirements. To comply with ADA, all units should be mounted at 34" (864) above the finished floor.The sink support has a laminate front trim and a removable front panel to allow for access to plumbing. Order Corian Work Surface (CG212.) separately. An alternative material top (such as stainless steel) can be field installed, but may have its own unique installation requirements.A Just SL-ADA-1921-A-GR-3 sink, with a drain located in rear center, fits in a 24" (610) x 24" (610) Sink Support.Note:Sink should be installed as far back as possible to allow room for drain connection without hindering supply connection.Order deck mounted faucet from outside supplier.If requesting an integral Corian bowl through options, please specify the sink bowl number. See sink numbers on page 13.Under mount sink cut outs to have finished edges, contact a Corian certified installer for details.Base Cabinets and ComponentsStorage CabinetThe Storage Cabinet is designed as a cube utilizing mortise andtenon construction with two side panels, a back panel, bottom, and top.Storage Cabinets can be configured with drawers, shelves, and doors. Side panels are pre-drilled inside at 1-1?4" (32) intervals to accept shelf, drawer, and door hardware.Adjustable glides, accessed easily from the inside of the cabinet using a 10mm hex driver, adjust 0 to 1-1/2". This allows cabinets to be leveled to accommodate uneven floors. The overall height of the storage cabinet ranges from 79" to 80-1/2.For architectural integrity, Storage Cabinet attaches directly to architectural wall using hardware appropriate for the type of wall construction.A field-supplied molding should be used to cover the toe kick and recess around the Storage Cabinets.Base Cabinets and ComponentsBase Cabinet Straight FillerStraight Filler can be field cut and is used to fill the space up to 6"(153) between the end of the Base or Storage Cabinet run and the wall.Attachment hardware is included.Two Straight Fillers can be screwed together to create a CornerFiller when two Straight Work Surfaces come together in a corner.When a Straight Filler is required, a longer than normal WorkSurface can be ordered (through Herman Miller Options) to meet the wall at the end of a cabinet run. A Side splash should be specified to finish the end of the Work Surface.Base Cabinets and ComponentsBase Cabinet Corner FillerCorner Filler is used to fill the space between two Base Cabinets at a 90° corner. The filler gives the cabinets a finished appearance.Corner Cabinet Filler can only be used with cabinets of equal depth.Attachment hardware is included.Base Cabinets and ComponentsBase Cabinet DoorBase Cabinet Door encloses a Base Cabinet. Storage Cabinet Door encloses a Storage Cabinet. Attachment hardware is included.Double doors with lock option are controlled by one lock, located on the right door, securing the left door. Unlocking the right door will also unlock the left.Doors mount on concealed, self-closing hinges: two per BaseCabinet Door and Storage Cabinet Doors less than 45" high; three per Storage Cabinet Doors taller than 45".Doors open 110° and are available without lock, with lock, and keyed alike.Doors cannot enclose drawers, except those used with the Interior Cabinet Adapter The maximum amount of drawer space available under a half-height door (45" H.) can be found on the first chart on page 17.Doors may be specified with a no-pull option for customer supplied handles to be field installed. Planning consideration must be given to the size of the handles when drawers and/or doors meet in a corner, or when doors open against a wall, to avoid interference.Storage Cabinet Doors may be specified solid or with temperedglass insertsBase Cabinets and ComponentsBase Cabinet ShelfThe Base Cabinet Shelf mounts in the Base Cabinet or Storage Cabinet in pre-drilled holes at 1-1/4" (32) intervals.Attachment clips are included and allow shelf to be repositioned easily.Shelf cannot attach at the door hinge location.Base Cabinets and ComponentsBase Cabinet Pullout ShelfThis Base Cabinet Pullout Shelf mounts on full-extension ball bearing drawer slides inside a 24" (610)- or 30" (762)-deep BaseCabinet or 24"(610)-deep Storage Cabinet. It is height adjustable in 1-1/4" (32) increments. The shelf cannot attach at a door hinge location.Attachment hardware is included.Base Cabinets and ComponentsBase Cabinet DrawerDrawer mounts on full-extension, ball bearing drawer slides.Attachment hardware is included.Drawers cannot be enclosed with doors.Drawer front is 5mm high-pressure laminate (HPL).When specifying a drawer below a door, specify a Base CabinetShelf (CG516.) to enclose the top of the drawer. Order base cabinet (CG502) separately.To enclose base cabinet without drawers, specify 30"- high door.To enclose base cabinet with small drawer, specify 25"-high door.To enclose base cabinet with medium drawer, specify 22"-high door.There is no central lock option. Each drawer must individually contain a lock.Drawers may be specified with a no-pull option for customer supplied handles to be field installed. Planning consideration must be given to the size of the handles when drawers and/or doors meet in a corner to avoid interference.Drawers in Base Cabinets or in the bottom 30" of Storage Cabinets may be configured in the following combinations:Base Cabinets and ComponentsBase Cabinet Bottle DrawerBottle Drawer mounts on full-extension, ball bearing drawer slides. Attachment hardware is included.Bottle Drawer is not available with locking option.Its partial-height drawer front allows access to contents without opening the drawer. Drawer front is 5mm high-pressure laminate (HPL).Bottle Drawer may be specified with a no-pull option for customer supplied handles to be field installed. Planning consideration must be given to the size of the handles when drawers meet in a corner to avoid interference.The 18" (457)-wide Bottle Drawer is supplied with two interior dividers; the 24” (610)-wide with three; and the 30" (762)-wide with four. Bottle Drawer has grooves in front and back to accept the dividers. Dividers can be removed to create larger spaces.The Casework Base Cabinet Bottle Drawer (CG537.) and theCo/StrucR Storage Case Bottle Drawer (C5045.) are not interchangeable.Base Cabinets and ComponentsWaste Container HolderThis holder includes waste container and mounts inside a 24"-deep Base Cabinet. It can be enclosed with a Base Cabinet Door. Actual container width is 10-1/8" (248).Attachment hardware and installation instructions are included.Note: Waste Basket is a 30-quart, pull-out waste container. The container is 22"D x 9.5"W and 19-14"H.Base Cabinets and ComponentsVertical Divider InsertThis adapter mounts to the inside top and bottom of a 24"-wide Base Cabinet. It includes attachment hardware and three vertical dividers. Dividers are not adjustable.It can be enclosed with a Base Cabinet Door.Base Cabinets and ComponentsInterior Cabinet AdapterThe Interior Cabinet Adapter is supplied with two side panels with nine drawer slots in 3" (76) increments. It can only be used with a 24" (610)-wide x 24" (610)-deep Base Cabinet.Attachment hardware is StrucR locking and non-locking drawers and tray/shelves can be used in Base Cabinet with adapter installed.To enclose a Base Cabinet containing an Interior CabinetAdapter, use a 24" (610)-wide, 30" (762)-high Base Cabinet DoorWork SurfacesWork Surface with Backsplash,Solid SurfaceWork Surface attaches with screws to the top of Base or Sink Cabinet for a continuous surface. Attachment hardware included.The backsplash sits on top of the Work Surface and attaches to a wall with construction adhesive (supplied separately).For applications around moisture, use Corian Work Surface or other solid-surface work surface.If extra length is needed to meet the wall at the end of a cabinet run, a longer than normal Work Surface can be ordered through Herman Miller Options.Work SurfacesCorner Work Surface with Backsplash, Solid SurfaceWork Surface attaches with screws to the top of Base or SinkCabinet for a continuous surface. Attachment hardware included.For applications around moisture, use Corian Surface Work Surface (CG219.) or other solid-surface work surface. Maximum unsupported length of a Corian surface should be no more than42" long by 30" deep.When two Base Cabinets meet at a 90° angle, a Corner WorkSurface is the recommended solution for covering the dead space between the cabinets. If covering two 18" (457) x 30" (762) BaseCabinets, use a 48" (1219) Corner Work Surface. If covering two24" (610) x 24" (610) Base Cabinets, use a 48" (1219) Corner Work Surface. If covering two 30" (762) x 30" (762) Base Cabinets, use a 60" (1524) Corner Work Surface. For added support of weight in the back corner, install appropriate wood blocking under the Work Surface in that corner.Work SurfacesSidesplash, Solid SurfaceSidesplash completes a backsplash on a Work Surface when a corner is turned or the Work Surface ends at an architectural wall.Sidesplash sits on top of the Work Surface and attaches to the wall with construction adhesive (supplied separately).Work Surface for SinkThe dimensions given refer to the maximum area that can be removed in order to accommodate a sink. Please refer to the sink manufacturer’s instructions for the exact dimensions for their specific sink.A silicone sealant should be used to seal any raw edges.Note: Sink surfaces should use Corian Surface Work Surface or other solid-surface work surface.Work SurfacesWork Surface SupportThe Work Surface Support cantilevers a Work Surface from the wall and abuts the side of a Base Cabinet at any height between29" to 36" from the floor to create a desk-height Work Surface max 48"W or a space for equipment.Typically used with a 24" (610)-deep Work Surface, this configuration provides room underneath Work Surface for Keyboard Tray or Pencil Drawer attachment.To cantilever the Work Surface from the wall without an adjacentBase Cabinet, order two Work Surface Supports. The load limit is 200 pounds on a 24" x 48" Work Surface. It is recommended that two Work Surface Supports are used for a Work Surface run up to 48" and four Supports for runs longer than 48".To cantilever the Work Surface from Wall Strips, use Work SurfaceBracket Overhead CabinetsOverhead Cabinet is constructed in a cube design, utilizing mortise-and-tenon construction, with a top, bottom, two side panels, and one cabinet back panel.Overhead Cabinet attaches directly to architectural wall using hardware appropriate for the type of wall construction.Side panels are pre-drilled inside at 1-1?4" (32) intervals to accept shelf and door hardware.Overhead Cabinet can be specified with solid door, door with glass inserts, and one or two adjustable shelves.Overhead CabinetsDoors may be specified with a no-pull option for customer supplied handles to be field installed. Planning consideration must be given to the size of the handles when doors meet in a corner, or when doors open against a wall, to avoid interference.Double doors with lock option are controlled by one lock, located on the right door, securing the left door. Unlocking the right door will also unlock the left.Overhead CabinetsOverhead Cabinet Straight FillerStraight Filler is used to fill the space up to 6" (153) between the end of an Overhead Cabinet run and the wall.Attachment hardware is included.Filler encloses top, front, and bottom of space.Overhead CabinetsOverhead Cabinet Corner FillerCorner Filler is used to fill the space between two equal depth Overhead Cabinets at a 90° corner.Filler encloses top, front, and bottom of space. Filler gives the cabinets a finished appearance.Corner Cabinet Filler can only be used with cabinets of equal depth.Attachment hardware is included.Overhead CabinetsAdd-On ShelfThis shelf fits inside an Overhead Cabinet. It is mounted to theOverhead Cabinet with shelf clips, which are included.Overhead CabinetsSloped TopWhen Overhead Cabinet or Storage Cabinet is not installed under a soffit, a Sloped Top may be specified to prevent items from being placed on cabinet top and for easy cleaning.Attachment hardware is included.There is no Sloped Top to fit a corner, so a soffit should be field constructed to fill the space.2. Task Lighting Herman Miller Twist or equal: Estimated quantity Desks: 20Task Lighting Energy-efficient, eco-friendly LED task light lightsMade from minimal material, so it requires less energy to produceConsumes 40-50% less energy than traditional undershelf lightingLED task light supplies 60,000 hours, or 24 years, of light (at 10 hours per day for a five-day work week). It uses under 10 watts of energy and can contribute to LEED points.One size and one color. Its magnet attachment fixture makes it easy to install and move. It has brackets for wood surfaces. Twist lights can also be daisy-chained together.Gives you the ability to control illumination for a specific task easily, just by moving the clear, tactile tab.Warranty: 12 year , 3 shift.3. Keyboard Trays Herman Miller Keyboard Tray or equal: Estimated quantity: 20Keyboard Trays Keyboard supports attach to the underside of a work surface to position your keying surface at the proper height and angle for your body. A wide range of height and tilt adjustments ensure healthy placement for people and furniture of all sizes. Mechanisms extend out when you need to type and store neatly under the work surface when not in use.Gold Cradle to Cradle CertifiedCM. They are composed of environmentally safe and healthy materials, designed for material reuse in a closed-loop system, such as recycling or composting, and assembled using 100% renewable energy.Warranty: 12 year, 3 Shift4. Monitor Arms Herman Miller Flo or equalEstimated quantity: 20Monitor Arms/ Dual or Single Geometric spring technology and dynamic fingertip control provide range and ease of movement. The self-balancing D-ring ensures stability in either portrait or landscape orientation, while offering 40 degrees of tilt up and down. A built-in weight gauge and convenient adjustment makes setting the tension simple, and an integrated three-point cable management system keeps cables neatly out of sight.Made from at least 17 percent post-consumer content and are 100 percent recyclable.GREENGUARD certified. Can contribute to LEED certification.Warranty: 12 year, 3 shift5. Exam Room Task Chair Herman Miller Caper Five Star Base Chair or equal: Estimated quantity: 10Five Star Base Chair - CaperIt is the intent of these specifications to permit this facility to purchase a chair that is a multipurpose chair which has a tubular steel frame, a molded back that is perforated and contoured, and has a biomechanical tilt mechanism that synchronizes the movement of the chair’s seat and back.Therefore, each manufacturer is requested to respond to the criteria detailed below, noting each instance where the chair being offered fails to meet the specification.1. The chair shall have a seat and a back of textured, integral color, injection-molded, glass-filled polypropylene.2. The chair’s five star base shall be die-cast aluminum, with a powder-coat epoxy finish.3. The chair shall have two seat options: a molded seat which is perforated and contoured; and a seat made out of a suspension material, FLEXNET (69% elastomer and 31%polyester).4. The chair shall be breathable and distribute the user's weight evenly5. The chair’s arms shall be self-skinning urethane with a cast steel insert.6. The chair’s arms shall be so designed that they can be added or removed on site.7. The chair’s base shall house a unitized pneumatic seat height adjustment mechanism contained in 2 steel tubes. The outer tube shall be coated in black.8. Chairs shall be furnished with interchangeable casters, specific to floor surface treatment.9. The chair shall be rated for 300 pounds.10. The molded seat chair shall have a seat height range of 16” to 21”, a seat width of 17.5” with a seat pan angle of 7.5 degrees and back-to-seat angle of 93.5 degrees and a back height of a nominal 19” and a lumbar support height of 10.5”.11. The Flexnet seat chair shall have a seat height of 16” to 21”, a seat width of 17.7” and back-to-seat angle of 95 degrees and a back height of 18” and a lumbar support height of 8”.12. The chair must feature standard 2 ?” casters.13. The chair must feature a 10-year, three-shift, limited warranty.14. Shall meet or exceed all ANSI/BIFMA performance requirements per ANSI X5.1-1993.6. Office Task Chair Herman Miller Aeron or equal: Estimated quantity: 27It is the intent of these specifications to permit this facility to purchase a chair that is comfortable, by delivering critical postural support; accommodating, by offering a variety of adjustments; task-motivating, to encourage a wide range of work activities and the many postures they require; and health-giving, by correctly supporting the body's orthopedic system (emphasizing sacro-lumbar support), while allowing the circulatory system to function without restriction.Therefore, each manufacturer is requested to respond to the criteria detailed below, noting each instance where the chair being offered fails to meet the specification.1. The chair must be able to support task-intensive, multi-task, general, and semi-reclined work postures.2. The chair must come in different sizes to accommodate people from the 1st percentile female through the 99th percentile male (according to 1988 Anthropometric Survey of U.S. Army Personnel).3. The chair must allow for body heat to flow through the entire seat and back. This "breathability factor," designed to avoid the buildup of body heat, enhances long-term comfort and productivity.4. The chair must conform to each user's shape in order to support and distribute body weight in a manner unique to each individual.5. The chair's tilt mechanism must allow the body to naturally and simultaneously pivot at the ankles, knees, and hips. Kinematic tilt preferred.6. The backrest and seat pan must move in proper relation for correct lumbar support in all seated positions, in order to support whatever posture a person prefers, from a work intensive forward position through semi-recline, whether the user is in motion or at rest.7. The chair must provide a 5-degree forward tilt without a lowering of the front edge of the seat pan.8. The chair must be able to be locked in fully upright, task-intensive postures.9. The chair must provide a tilt limiter to limit the amount of recline throughout the recline range.10. The chair must lower to at least 15 inches to accommodate the 5th percentile female.Within the same line, the chair must lower to at least 14.3 inches to accommodate the 1st percentile female.11. The chair's pneumatic lift must have a height range of more than 5 inches to properly support various task positions (e.g., 14.3- to 19.5-inch range in a smaller chair and 15- to 20.8-inch range in a larger chair.)12. The chair must have an adjustable lumbar support (vertical adjustment of 4.5 inches and depth adjustment from 3/4 to 1 1/4 inches).13. The chair must feature pivoting arms to accommodate various task postures, including 15 degrees outward (for mousing) to 17 1/2 degrees inward (for keying).14. The chair must allow 30 degrees of recline to allow the user to transfer weight from iscural tuberosities (sitting bones) to the thoracic area (back and shoulders). This is necessary for health-supporting comfort in long-term sitting.15. The tilt-tension adjustment must allow the user to control the resistance felt while leaning back—to accommodate more users more comfortably.16. The chair arms must provide a wide, comfortable platform (at least 4 inches wide and11 inches long) and must allow for 4 inches of vertical height-adjustment.17. The chair must meet U.S. standards CAL 133 and Boston Fire Code at no additional cost.18. The chair must meet ANSI/HFS Standard 100-198819. The chair must meet significant international codes, including DIN 4551 SafetyRequirement, BS 5940 VDT ST, BS 5459 Performance and Tests, CAN/CSA 2412-M89VDT Requirement, JIS S1011-VDT Requirement.20. All controls must be adjustable from a seated position.21. Educational information must be available including video orientation and hang tags.22. The chair's arms must be available upholstered or unpholstered.23. The chair must feature standard 2 1/2-inch casters for carpeted or hardwood floors.24. The chair must be constructed of at least 60 percent recyclable materials.25. The chair must feature a 12-year, three-shift, limited warranty.7. Pharmacy Stool Aeron Stool or Equal Estimated Quantity: 2This work stool has a Fine-Tune? foot ring mechanism that allows the user to adjust the height of the foot ring from a seated position and reduces the pressure on the underside of the user's thighs. It has a 5-star base, pneumatic seat-height adjustment, and 2 height options. The low stool has a seat-height range of 24 1/2" to 29" with a Fine-Tune foot ring that adjusts 2 1/2" (from 15" to 17 1/2" from the seat). The high stool has a seat-height range of 27 1/2" to 34" with a Fine-Tune foot ring that adjusts 5 1/2" (from 15" to 20 1/2" from the seat). The high stool provides a wider range of height adjustment than does the low stool. The work stool is available in size B.The stool has a Pellicle? material that conforms to the user's body and retains its original shape when unoccupied. The material is lightweight and breathable and distributes the user's weight evenly over the seat and back of the stool. The stools Kinematic? tilt lets the body naturally pivot at the ankles, knees, and hips.Tilt options include a tilt limiter that allows the user to se the tilt range to limit the amount of recline; a tilt limiter and seat angle that allows the user to limit the amount of recline and select a horizontal or 5° forward seat angle; or a standard tilt.Back-support options include Posture Fit? support and an adjustable lumbar support. ThePosture Fit support provides a custom fit in the lower back area, below the beltline, that helps achieve healthier posture and improved lower back comfort. The user can adjust the level of support with a lever.Arm choices include a fixed, nonadjustable option; a height-adjustable option that moves the arms 4" vertically; and a fully adjustable option that moves the arms 4" vertically and pivots the arm pads 15° outward and 17 1/2° inward.The ZB, WS, and G8 options include a frame appliqué. These appliqués are applied to anAeron work stool's seat, back, and arms to minimize the effect of contact between the stool and a wood-edge surface. The G8 option does not include an arm coating.The work stool and the frame appliqué options (ZB, WS, and G8) do not meet CAL 133 requirements.Work stools are tested and warranted for use by persons 300 pounds and under.Construction Seat and BackThe separate seat and back shall be a durable, breathable Pellicle material stretched within a carrier ring and fitted into an outer frame. The Pellicle material shall be a woven blend of spandex and colored polyester yarn with Hytrel elastomeric polyester, which is a high-performance polymer. It shall support and distribute the user’s weight evenly over the seat and back of the work stool and shall retain its original shape when the work stool is unoccupied.The carrier ring shall be a glass-filled elastomeric copolymer molded around the perimeter of the Pellicle material to frame and support it. The outer frame shall be injection-molded, glass filled nylon. The ring and frame shall be secured together with screws. The back of the outer frame shall have molded-in rails to accept the optional lumbar pad.At the seat’s waterfall front edge, a cushioning insert of molded urethane foam shall be fitted between the Pellicle material and the stool frame and attached with double-sided tape.Right and left swing arms shall attach the seat and back to the tilt mechanism, support the arms, and provide an attachment location for the control knobs and cable covers for the tilt. The swing arms shall be die-cast aluminum with either a polished or wrinkle-coat powder-coat epoxy finish. The swing arms shall attach with 2 screws to each side of the back frame and with ball joints to the seat.The cable covers shall be injection-molded, glass-filled nylon and shall be screw attached to the inside of the swing arms.The seat shall have a link on each side to control the seat angle. The links shall be die-cast aluminum with a wrinkle-coat powder-coat epoxy finish. The links shall attach with screws to the seat and tilt housing.Back Support (Optional)There are 2 back-support options available: the Posture Fit support and adjustable lumbar pad.Posture Fit The Posture Fit support shall have a glass-filled polypropylene “wishbone” frame, a 7 3/4”-high x8”-wide pad of rigid ABS plastic and polyurethane foam, a glass-filled polypropylene anchor, and an operating mechanism. The operating mechanism shall be glass-filled nylon, glass-filled polypropylene, die-cast zinc, and metal parts, and shall include a steel cable linked to a glass filled polypropylene knob.The optional Posture Fit support shall attach to the side rails and bottom of the back frame.Lumbar Pad (Optional)The lumbar pad shall be self-skinning urethane with a clip insert of injection-molded nylon molded onto each side. Each clip insert shall have 12 C-shaped sections that grip the rails in the back frame and let the user slide the pad up and down. See “Adjustments” for lumbar adjustments.Arms (Optional)The work stool shall be available with no arms, fixed arms, height-adjustable arms, or fully adjustable arms. Each arm shall have an arm pad support and a yoke, both of die-cast aluminum with either a polished or wrinkle-coat powder-coat epoxy finish. A support shall attach to the arm yoke with screws, and the yokes shall attach with screws to slots in the swing arms, at the right and left sides of the chair back. The yoke of a height-adjustable arm or of a fully adjustable arm shall ride up and down in the slot, its position controlled by an injection-molded acetal lever. See “Adjustments” for adjustable-arm ranges. Stools with fixed arms shall have polypropylene fillers in the swing arm slot above and below the yoke. The seat-to-arm height for the stool is 8 1/2". Arms can be added or removed on site. Fillers of polypropylene cover the slots in the swing arms when arms are removed.Stools shall have 11 1/2"-by-4" arm pads that shall be foamed in place to a nylon arm pad insert on the arm pad support. Standard nonupholstered arm pads shall be self-skinning urethane foam molded over a nylon insert. Optional upholstered arm pads shall be polyurethane foam covered with leather. See the “Fabrics Fire Retardancy” section for leather and Customer’s Own Leather (COL). Refer to the current Herman Miller price book for the exact yardage and additional information. Arm pads can be replaced on-site. Work Stool BaseThe low- and high-range stool base shall house a unitized, dual-inner-tube pneumatic seat height adjustment mechanism. The inner tube with the tapered end that’s pressed into the tilt casting shall rotate in a polymer bushing, while the inner tube with grooves to accept the foot ring adjustment mechanism shall slide in a polymer bushing. The outer tube, which shall be coated black, shall have a tapered end pressed into the base casting. Both inner tubes and outer tube shall be steel.The low- and high-range Fine-Tune? foot ring assembly shall be a 23.5”-diameter, painted, die cast foot ring; sliding over an extruded aluminum center support tube; and user-controlled, rotating adjustment knob. The foot ring shall attach to a center support tube, the tube shall attach to the pneumatic cylinder which operates by the seat height adjustment mechanism, andThe foot ring adjustment knob shall attach to the upper center support tube. The foot ring shall have a multi-polymer cover that provides 2.4” of footrest surface. The integrated thread design provides additional foot support. The foot ring’s polymer cover finish shall match the stool’s frame and shall have black treads. The finish on the adjustment knob shall be graphite.See “Adjustments” for seat-height ranges.Pneumatic cylinders can be replaced on site. (See Service Parts in Kiosk.)The 5-star base shall be die-cast aluminum, with either a polished or wrinkle-coat powder-coat epoxy finish. The chair shall swivel 360°.Stools shall be furnished with interchangeable casters. See the “Casters and Glides” section for additional information.Adjustments Posture Fit (Optional)The optional Posture Fit support shall have 1” of inward adjustment that shall be user controlled with an adjustment knob.Lumbar Pad (Optional)The optional lumbar pad shall grip the rails in the back frame to allow the user to slide it up and down within a 4 1/2" range. The pad shall be approximately 3/4" thick on the inside and 1 1/4" thick on the outside and shall be reversible to adjust for more or less support. See the “SeatingMeasurements” chart for pad dimensions.Seat HeightSeat height shall be controlled by a glass-filled nylon lever and paddle mounted on the right swing arm.The low stool seat height range shall be 24 1/2” to 29”. The high stool seat height range shall be 27 1/2” to 34”.Foot ring HeightThe Fine-Tune foot ring mechanism shall allow the user to adjust the foot ring from a seated position. The foot ring shall adjust in height (up and down) together with the stool seat.The Fine-tune foot ring height in the low stools shall range from 15” to 17 1/2” from the seat pan (to the foot ring). The foot rings’ height in the high stools shall range from 15” to 20 1/2” from the seat pan.Adjustments TiltThe Kinemat tilt shall allow the user’s body to pivot at the ankles, knees, and hips. The back-to seat tilt ratio shall be 1 3/4° to 1° when the stool is reclined from a neutral angle. A stool with a standard tilt (AE711 and AE721) or with a tilt limiter (AE712 and AE722) shall have a nominal21° body-weight-controlled back recline. A chair with a tilt limiter and a seat angle adjustment(AE713 and AE723) shall have a nominal 26° recline.The tilt mechanism shall be comprised of a rubber torsion bushing spring, a gear-driven tension adjustment, and a stamped steel housing. A 2-piece, fire-retardant acrylonitrile butadiene styrene (ABS) cover shall snap together to enclose the tilt mechanism.The tilt-tension adjustment shaft shall extend from the right side of the tilt and shall be steel, with a powder-coat epoxy finish. A soft, textured, molded tilt-tension knob shall be pressed onto the shaft.The stools with a tilt limiter shall have 9 incremental adjustments to allow the user to limit the amount of back recline within a nominal range of 21° (AE712 and AE722) or 26° (AE713 andAE723). The tilt limiter shall be controlled by a glass-filled nylon lever and paddle mounted on the left swing arm. The seat angle adjustment shall let the user select a +1° horizontal or -4° forward seat angle. The seat angle adjustment shall be controlled by a glass-filled lever and paddle mounted on the left swing arm.Height-Adjustable Arms (Optional)The height-adjustable arms shall have a lever to let the user adjust arm height. The arm height adjustment range shall be approximately 4", and adjustments shall be made to any height within the range.Fully Adjustable Arms (Optional)The fully adjustable arms shall have an injection-molded acetal lever to enable the user to adjust arm height. The arm-height adjustment range shall be approximately 4", and adjustments shall be made to any height within the range.The fully adjustable arms (arm angle) assembly shall have a plastic plate with indents to allow the arm support to pivot to 3 different positions. The arm shall be adjustable to 15° outward, neutral, and 17 1/2° inward angles by applying pressure to the side of the arm. A torsion spring within the arm assembly shall hold the arms in position.Performance The stool shall be rated to support a maximum of 300 pounds.DataThe work stool does not meet CAL 133 requirements.8. Overbed Tables Nemschoff Oasis Over bed Table or equal: Estimated quantity: 3OasisOverbed TableThe Oasis Overbed Table was designed to provide dedicated space for both patients and caregivers. The main tray adjusts vertically within a range of over 17 inches to fit a wide variety of patients and applications. Optional upper and lower trays add patient and caregiver functionality, and rounded inside edges make the trays easy to clean.Patient Convenience and Organization A large main tray provides ample space for eating or activities, and a separate compartment and optional upper tray expand the patient’s options for organization.Caregiver Support Table height is easily adjusted with a onehanded mechanism. The adjustable bottom tray is positioned toward the caregiver, keeping supplies within reach.Flexible Accommodation With over 17" of vertical range adjustment, Oasis is comfortable for patient use in a chair or bed. The X-base conveniently accommodates chairs, while the U-base was designed for use with beds.Hard-wearing laminate top provides durability Generous rounded urethane tray edges contain spills and make cleanup easy 2" minimum clearance base accommodates low patient bedsSmooth, one-handed activation to raise and lower the top Multiple patient trays and adjustable caregiver tray enhance usability U or X shaped base to accommodate a variety of bed and chair designsFeatures ? Heavy-duty steel construction ? Laminate top ? Rounded inside tray edges ? Urethane spill-containing edge ? Column mechanism with roller bearings ? 2" minimum clearance base ? GREENGUARD Gold Certification ? Five Year WarrantyOptions X or U shaped base ? Fixed patient tray ? Adjustable caregiver tray ? Framed vanity mirror with storage ? Choice of laminate top color ? Choice of urethane edge colorCartsHerman Miller Linen Carts or equal: Estimated quantity: 2Herman Miller Pharmacy Supply Carts or equal: Estimated quantity: 3Herman Miller Bone Marrow Carts or equal: Estimated quantity: 10Herman Miller I.V. Carts or equal: Estimated quantity: 4Herman Miller Clinical Supply or equal: Estimated quantity: 2Procedure and Supply CartsSingle Wide Cart 42” high and L Cart (20” Platform) Drawers and Keyless EntryDescription All interior components and accessories can be removed from the cart body, making every surface—inside and out—accessible for cleaning. Drawers can be cleaned in a washer. Surfaces can be cleaned without danger of rusting or surface damage. The smooth, rounded edges of the carts and components are easier to clean than sharp angles. And because carts and components are plastic, there is no chance of paint contamination.These carts include slots every 3” that accept accessories such as drawers and shelves.Accessories are attached to the top, the side, or the back of the cart. A variety of accessories can be added to configure the cart for specific applications.Bodies are available in two width platforms: 20” and 24”,Bodies are also available in two width styles; single-wide and double-wide.Procedure/supply carts are made of 33% recycled materials and are up to 77% recyclable at the end of their useful life.They are GREENGUARD certified as low-emitting products that meet current indoor air quality standards.Procedure/supply carts are easy to maneuver and push, even when fully loaded.Several lock options maintain the security of cart contents.DimensionsHeight Depth WidthHeight: 36”,42”,72”Depth: 22” , 27 ?” Width Single Wide: 27 ?” ,32 ?”, 32 ?”, 32”Width Double Wide: 49 ?” , 58 5/8”ConstructionCart BodyThe sides consist of ABS high-impact plastic segments stacked upon two square 16-g. tubular metal frames. To insure rigidity, the tubular frames are connected by metal spanners. On the interior, the side segments include corrugated slots that hold drawers and other accessories. Full-extension, self-closing drawer slides can be installed at any slot location. The floor of the cart is made of high-impact polystyrene plastic. The back is made of a high- impact polystyrene plastic sheet held in place by the side segments. Aluminum rails attached to the side segments and rear panel hold accessories.Casters36”h and 42”h single-wide carts utilize 5” heavy-duty anti-static swivel casters. The front casters (drawer side) of the cart are swivel with brakes. 72”h carts feature 6” casters. Double-wide carts include a steer lock caster located on the front right side. Each caster has a Tenite polypropylene bumper.Performance DataLoad limits: The 72” H cart supports 350 lbs. evenly distributed.The 36” H and 42”H Single wide cart supports 250 lbs. evenly distributed.The 36” H and 42”H Double wide cart supports350 lbs. evenly distributed.The Top of the Cart Supports 100 lbs. evenly distributed.The Slide-out Shelf Supports 25 lbs.Drawers Drawers and Drawer with LidDescription These drawers fit into a procedure/supply cart and have stops to prevent accidental removal. The drawer is available with no lock, a keyed lock, or a keyless lock. Versions are also available with lids and lids that lock. Two series of drawers are available; one for the 20”w cart platform, one for the 24”w cart platform. Drawers for the 20”w platform also fit several Co/Struc components including lockers, C Frames, and under work surfaces.DimensionsHeight Depth Width3”, 6”, 9” 15 3/8” 20 ?”3”, 6”, 9” 15 3/8” 25 ?”ConstructionDrawerThe drawers are molded in 98.5% Dow Styron 484 and 1.5% Dow MasterbatchMB50-484virgin Lustran 004 thermoplastic.Drawers without locks or lids are made entirely of plastic and can be placed in an automatic washer.LidThe lid is made from 18 ga steel and powder coated soft white. Lid is hinged toallow the drawer to be opened while it is extended.Performance DataLoad limits: The drawer supports 25 lbs. evenly distributed.Drawer with keyless entry Drawer with locking lid ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download