Publications & Presentations - ORNL



Christopher James Janke

Distinguished Scientist

Chemical Sciences Division

Carbon and Composites Group

Oak Ridge National Laboratory

P.O. Box 2008, MS 6053

Oak Ridge, TN, 37831-6053

Phone: 865-574-9247; Fax: 865-574-8257

jankecj@

Areas of Research:

Polymer Matrix Composites; Radiation Processing of Composites and Adhesives; Radiation Grafting; Thermoset and Thermoplastic Resins; Elastomers; Carbon Materials; Process Science & Engineering; Physical, Mechanical, Chemical and Thermal Characterization and Testing of Materials; Composite Structures; Nondestructive Evaluation & Testing; Resin Formulation; Composite Manufacturing; Fiber Converting; Prepregging; Tooling; Polymeric Fiber Adsorbent Development and Testing; Lithium-Ion Batteries; Project Management; Classified Projects.

Bio:

Mr. Janke received a B.S. in chemistry from Appalachian State Univ., Boone, NC, in 1983 and an M.S. in chemistry from the Univ. of TN, Knoxville, in 1986. He was employed by Milliken and Co. from 1986-88 as a Development Engineer responsible for the development and formulation of new adhesive systems and reinforcement fabrics. Since 1988 he has been employed at the Oak Ridge National Laboratory as a Distinguished Scientist and initiated, planned and managed several major research projects in the areas of polymer matrix composites and process engineering; radiation processing and radiation grafting; composite heat damage; adsorbent development for the extraction of uranium from seawater; materials compatibility on plastics, elastomers and composites; electron beam processing of lithium-ion battery materials; and many classified projects. Chris has published extensively in a variety of technical areas and formally presented his work at many national and international conferences and workshops. He has over 70 publications and several pending publications, four R&D 100 Awards, nine patents, several pending patents and commercial licenses. He also planned and coordinated four workshops on electron beam curing of composites, chaired several conference sessions on composites, mentored numerous post-doctoral research associates and students, participated in three professional societies and is recognized in “Who’s Who in Polymers and Plastics”.

During 2007-2020 Chris conducted materials compatibility studies on about 90 different transportation fuels including ethanol, isobutanol, diesel fuel, bio-oil and blendstock molecules on a wide range of plastic, elastomer, cork and composite materials. In these DOE-funded projects he conducted rate dependant degradation studies of mechanical, chemical, thermal and physical properties and worked closely with DOE’s Bioenergy Technologies Office (BETO), Underwriters Laboratories (UL), NREL and Butamax® Advanced Biofuels LLC (a joint venture between BP and DuPont) to provide technical information on materials issues related to fuel dispensers, underground piping, storage tanks and fuel handling systems that operate under dynamic conditions.

In 2015-2019 Chris developed electron beam curable binder materials for reducing the cost of manufacturing lithium-ion batteries and increasing their energy density. In this DOE-VTO funded project Chris successfully completed several high-speed, electron beam curing experiments at line speeds of 500 feet per minute on cathode materials using PCT-Comet’s electron beam pilot line which were significantly faster than conventional or UV processing methods and were the highest line speeds ever demonstrated for cathode materials. In addition, Chris developed solventless processing methods for processing thick electron-beam cured cathodes for producing higher density lithium-ion batteries. Cost and energy calculations demonstrated that EB processing offers a potential cost advantage around two orders of magnitude over conventional or UV processing, and its energy advantage may be up to three orders of magnitude in high volume battery production. Chris also procured and co-authored performance specifications for a roll-to-roll Electron beam pilot line machine that was manufactured by PCT Ebeam and Integration, LLC in Davenport, Iowa which was installed in 2020 at ORNL’s DOE Battery Manufacturing R&D Facility (BMF). This $1.1 million, 120-300 keV, self-shielded and nitrogen inerted machine features a “Clamshell” design, unwind/rewind capability and a 15.7-inch wide usable beam width and delivers a 60 kGy dose at a line speed of 12.5 m/min. (41 fpm) at 300 keV. This machine will serve as a test bed for reducing the manufacturing costs for making lithium-ion batteries as well as other future projects.

From 2010-2017 Chris served as principal investigator on the development, synthesis and testing of fiber-based adsorbents for extracting uranium and other metals from seawater that have high capacity, selectivity, durability and rapid loading and elution kinetics. In this DOE-NE funded project Chris managed subcontracts with several fiber, textile and irradiation companies; and conducted extensive collaborations with many organizations including ORNL, PNNL, LBNL, LANL, BNL, Woods Hole Oceanographic Institute, numerous universities and with scientists and engineers from China and Japan including the Chinese Academy of Sciences, Shanghai's Institute of Applied Physics and Japan's Atomic Energy Research Institute. In 2017 he received a UT-Battelle Team Award for his work on Uranium Extraction from Seawater. In 2016 he received an R&D 100 Award for the “U-Grabber” which is an adsorbent material designed to extract uranium and other metals from water inexpensively and efficiently. In 2012 he received an R&D 100 Award for the development of “HiCap Adsorbents” which demonstrated the world’s highest uranium adsorption capacity from seawater (5X times higher in capacity than previous adsorbents described in the literature since the 1960’s).

During the 1990’s and 2000’s Chris served as principal investigator, project manager, and task leader on over 25 projects on electron beam curing of polymer matrix composites and adhesives including one of the largest multi-organizational CRADA ever signed, a 3-year, 7-million dollar DOE-sponsored partnership entitled, “Electron Beam Curing of Polymer Matrix Composites”, involving 10 industrial companies and three DOE laboratories. For over 15 years Chris developed, formulated, and characterized hundreds of electron beam curable cationic epoxy resins systems for various composite and adhesive applications. In this work he also conducted research in the areas of processing development, low-cost tooling development, prototype manufacture, curing kinetics, fiber/matrix interface optimization, and economic studies. He also served as principal investigator on a 3-year, 3.2-million-dollar DOE-sponsored CRADA entitled, “Interfacial Properties of Electron Beam Cured Composites”, involving 11 industrial companies, US Air Force, US Army, and NASA. In 1997 he received an R&D 100 Award for “Electron-Beam-Curable Cationic Epoxy Resins”, a 1997 Lockheed Martin Technical Achievement Award for “Creating Major Breakthroughs in Composites Materials Processing Using Electron Beam Energy for Curing” and a 1998 AMSE Technological Achievement Award for “Electron-Beam Curable Cationic Epoxy Resins”.

For over 20 years Chris served as project manager on many Navy, Air Force and Office of Naval Research funded projects concerned with the residual mechanical, physical, thermal, and chemical properties characterization of heat damaged composites. These projects resulted in the successful development of the world’s only known nondestructive inspection spectroscopic techniques that possess the unique capability of detecting and quantifying heat damage in composites. In 2008, R&D efforts culminated in the successful development, demonstration, and transition of the first-of-its-kind, commercially available, nondestructive Laser-Induced Fluorescence (LIF) Composite Heat Damage Detector that provides highly accurate and rapid heat damage assessments of fiber-reinforced composites. The LIF instrument is user-friendly, lightweight, portable, and highly reliable and is currently being used at various Navy Repair Depots in support of several aircraft platforms. In 2008 he received an R&D 100 Award for the “Laser-Induced Fluorescence Composite Heat Damage Detector”.

Chris has also held a DOE Q clearance during his entire career at ORNL and has worked on a wide variety of classified projects and completed many critical milestones and deliverables.

Chris has also worked on numerous other projects during his career at ORNL that were funded by DOE, DoD and private industry including:

1. Neutron imaging of polymers to determine surface contributions to permeation (DOE - Bioenergy Technologies Office (BETO));

2. Reduction of CO2 emissions through lightweight SMC body panels in support of Volkswagen’s new Atlas SUV (organizations include: ORNL, IACMI, VW, Purdue Univ., Michigan St. Univ., UTK);

3. Long-lived polymer electrolytes for lithium-ion batteries;

4. Super hard surfaced polymers produced via high energy, heavy-ion beam irradiation;

5. Interfacial optimization of carbon fiber composites containing polyesters, vinyl esters and thermoplastic resin systems;

6. Non-contact, non-destructive cure state measurement of adhesives, sealants and coatings using Laser-Induced Fluorescence spectroscopy;

7. High performance centrifuges for uranium enrichment;

8. Composite parts for the U.S. Navy’s Seawolf Submarine;

9. High temperature superconductivity;

10. Development of low-cost carbon fibers including radiation stabilization of polyacrylonitrile fibers;

11. Laser cutting of carbon fibers;

12. Fusion bonded epoxy coatings for gas and liquid pipelines;

13. New and faster method for manufacturing carbon-carbon composites;

14. Carbon nanomaterials;

15. Rapid composite preform manufacturing methods including the programmable, powdered perform process (P4) and slurry process;

16. Resin preform permeability;

17. Insulation materials for Compact Ignition Tokamak Fusion Machine;

18. Fabrication of composite overwrapped metal tubes;

19. Durability studies of fiber-reinforced thermoplastic composites for automotive applications including carbon/polyphenylene sulfide (PPS) composites;

20. Advanced power transmission composite conductors;

21. Lightweight, low-noise composite housings for U.S. Army power generators;

22. U.S. Army’s Fiber Optic Guided Missile program;

23. Elastomeric O-ring investigations in support of the Spallation Neutron Source (SNS) facility;

24. Radiation shielding materials for outer space applications;

25. Hydrogen storage materials;

26. Composite materials investigation in support of Oak Ridge’s Toxic Substance Control Act (TSCA) Incinerator;

27. Safety analysis reports in support of the Atomic Vapor Laser Isotope Separation (AVLIS) Program.

28. Served as a member of DOE’s Tiger Team in the early 1990’s which included inspecting a very large number of buildings and structures at the K-25 site in Oak Ridge, TN.

Chris has experience in a wide range of composite processing methods, radiation grafting and processing methods, NDE techniques and analytical techniques including: oven, autoclave, electron beam, X-ray and gamma radiation processing; adhesive bonding, hand lay-up, filament winding, fiber/tape placement, RTM, VARTM, pultrusion, compression molding, honeycomb/sandwich composites, rotational molding, RIM, injection molding, and textile processing (braiding, weaving, knitting); ultrasonics, leaky-lamb waves, DMA, DSC, TGA, laser-induced fluorescence, FTIR, ATR, DRIFT and UV-Vis spectroscopy, NMR, rheometry, ICP, SEM/EDX, EPR, GPC/SEC and elemental analysis. He has also had extensive interactions and collaborations with a variety of: DOE, DoD and industrial companies; aerospace, automotive and marine companies; resin, fiber, prepreg and tooling manufacturers; and university researchers and international collaborators including Chinese, Japanese, Canadian, French and Turkish scientists and engineers.

Awards:

1. 2017 UT-Battelle Team Award – Research Accomplishment Category – Uranium Extraction from Seawater Project; Abney, C.W.; Bryantsev, V.; Janke, C.J.; Mayes, R.T.; Saito, T.; Tsouris, C.; Dai, S.; Brown, S.

2. 2016 R&D 100 Award – U-Grabber – Dai, S.; Brown, S.; Rogers, R.; Janke, C.J.; Mayes, R.T.; Saito, T.; Hanes, R.; ORNL and 525 Solutions.

3. 2012 R&D 100 Award – HiCap Adsorbents – Janke, C.J.; Tsouris, C.; Sun, X.G.; Mayes, R.T.; Oyola, Y.; Dai, S.; Bauer, C.; Saito, T.; Brang, J.; Haggard, J.; ORNL and Hills, Inc.

4. 2008 R&D 100 Award – Laser-Induced Fluorescence (LIF) Composite Heat Damage Detector – Janke, C.J.; Fisher, J.; Fisher, W.; Wachter, E.; Clemons, A.; Eberle, C.; Maxey, C.; Storey, J.; ORNL and Galt Technology LLC.

5. 1998 AMSE Technological Achievement Award - Electron-Beam Curable Cationic Epoxy Resins.

6. 1997 R&D 100 Award - Electron-Beam-Curable Cationic Epoxy Resins – Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; ORNL, Y-12 and Atomic Energy of Canada Limited (AECL).

7. 1997 Lockheed Martin Technical Achievement Award - Creating Major Breakthroughs in Composites Materials Processing Using Electron Beam Energy for Curing.

Patents:

1. Du, Z., Janke, C.J., Daniel, C., Wood, D.L.; A method of solvent-free manufacturing of composite electrode incorporating radiation curable binders. Disclosure Number: 201603812;

DOE-S Number: S-138,463; UTB 3812.1 – 6321-490 (157379.06501); Filed to USPTO on May 2018.

2. Janke, C.J.; Mayes, R.T.; Dai, S.; Das, S.; Amidoxime-functionalized materials and their use in extracting metal ions from liquid solutions. U.S. Patent Appln. No.: 15/625,276; ORNL Ref: 3664.1; SSMP Docket: 34938; Patent application filed to USPTO on 6/20/2017. Pending patent.

3. Janke, C.J.; Mayes, R.T.; Dai, S; Advanced Adsorbents and Methods for Extraction of Metals from Aqueous Sources. U.S. Patent Application No. 62350778 filed June 16, 2016 (DOE S-Number: S-138,305; Invention disclosure no.: 201603664; EFS ID: 26082295). Pending patent.

4. Janke, C.J.; Dai, S.; Oyola, Y.; Fiber-Based Adsorbents Having High Adsorption Capacities for Recovering Dissolved Metals and Methods Thereof. U.S. Patent No. 9,433,920 B2; September 6, 2016.

5. Janke, C.J.; Dai, S.; Oyola, Y.; Powder-Based Adsorbents Having High Adsorption Capacities for Recovering Dissolved Metals and Methods Thereof. U.S. Patent No. 9,327,267 B2; May 3, 2016.

6. Janke, C.J.; Dai, S.; Oyola, Y.; Foam-Based Adsorbents Having High Adsorption Capacities for Recovering Dissolved Metals and Methods Thereof. U.S. Patent No. 9,044, 739 B2; June 2, 2015.

7. Janke, C.J.; Dai, S.; Oyola, Y.; Fiber-Based Adsorbents Having High Adsorption Capacities for Recovering Dissolved Metals and Methods Thereof. U.S. Patent No. 8,722,757 B2; May 13, 2014.

8. Huff, S.P.; Janke, C.J.; Kass, M.D.; Lewis, S.A.; Pawel, S.J.; Theiss, T.J.; System for Determining Biofuel Concentration. U.S. Patent No. 9,442,101; Sept. 13, 2016.

9. Howell, D.; Janke, C.J.; Eberle, C.C.; Ionizing Radiation Post-Curing of Objects Produced by Stereolithography and Other Methods. U.S. Patent No. 6,107,008; August 22, 2000.

10. Janke, C.J.; Lopata, V.J.; Havens, S.J.; Dorsey, G.F.; Moulton, R.J.; High Energy Electron Beam Curing Of Epoxy Resin Systems Incorporating Cationic Photoinitiators. U.S. Patent No. 5,877,229; March 2, 1999.

11. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Toughened Epoxy Resin System and a Method Thereof. U.S. Patent No. 5,726,216; March 10, 1998.

12. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Moulton, R.J.; Ionizing Radiation Curing of Epoxy Resin Systems Incorporating Cationic Photoinitiators. EP 0 843 685 B1, Date of Publication: 24.09.2003, Application no.: 96925514.0, Date of filing: 26.07.1996, Intl. Application no. PCT/US96/12302, Intl. Publication no. WO 97/005172 (13.02.1997 Gazette 1997/08).

Recent News















Journal

Publications:

1. Mayes, R.T.; Janke, C.J.; et. al.; Chaotropic agents as base alternatives for adsorbent conditioning; pending journal article. (PubID)

2. Das, S., Janke, C.J., Brown, S., Mayes, R.T., Gill, G., Dai, S.; Advanced Polymer Sorbents: Performance for Lower V/U Adsorption in Natural Seawater; pending journal article (PubID)

3. Das, S., Neti, V.S., Brown, S., Janke, C.J., Mayes, R.T., Gill, G.A., Dai, S.; Strategies Towards Synthesis of Advanced Functional Sorbents and its Performance for Uranium Uptake from Natural Seawater; pending journal article (PubID)

4. Pan, H.B.; Wai, C.M.; Kuo, L.J.; Gill, G.A.; Wang, J.S.; Joshi, R.; Janke, C.J.; A highly efficient uranium grabber derived from acrylic fiber for extracting uranium from seawater; Dalton Trans., 2020, Mar 3: 49(9), 2803-2810; doi: 10.1039/c9dt04562g; (PubID137945).

5. Kass, M.; Janke, C.J.; Connatser, R.; West. B.; Solubility and Volume Swell of Fuel System Elastomers with Ketone Blends of E10 Gasoline and Blendstock for Oxygenate Blending (BOB); Journal of Elastomers & Plastics; 2019; November 21, 2019; ; (PubID130178).

6. Du, Z., Janke, C.J., Li, J., Wood, D.L.; High Speed Electron Beam Curing of Thick Electrode for High Energy Density Li-ion Batteries; Green Energy & Environment, 2019, 4(4), 375-381; October 2019; ; (PubID114380)

7. Kass, M.; Janke, C.J.; Connatser, R.; West. B.; Elastomer Swell Behavior in 1-Propanol, Diisobutylene, Cyclopentanone and a Furan Mixture Blended in E10 and a Blendstock for Oxygenate Blending (BOB); SAE International Journal of Fuels and Lubricants, 12(3):2019; doi:10.4271/04-12-03-0011; ISSN: 1946-3952; e-ISSN: 1946-3960 (PubID126898).

8. Kuo, L-J; Pan, H-B; Strivens, J.E.; Schlafer, N.; Janke, C.J.; Wood, J.R.; Wai, C.M.; Gill, G.A.; Assessment of Impacts of Dissolved Organic Matter and Dissolved Iron on the Performance of Amidoxime-Based Adsorbents for Seawater Uranium Extraction; Industrial and Engineering Chemistry Research, 2019, 58, 19, 8536-8543; DOI:10.1021/acs.iecr.9b00670; (PubID130052); Selected for journal front cover.

9. Kuo, L-J; Gill, G.A.; Tsouris, C.; Rao, L.; Pan, H-B; Wai, C.M.; Janke, C.J.; Strivens, J.E.; Wood, J.R.; Schlafer, N.; D’Alessandro, E; Temperature Dependence of Uranium and Vanadium Adsorption on Amidoxime-Based Adsorbents in Natural Seawater; ChemistrySelect; 2018, 3(2), 843-848; 10.1002/slct.201701895; (PubID107677); Selected for journal front cover.

10. Kass, M.D., Janke, C.J., Connatser, R.M., West, B., Szybist, J., Sluder S.; Influence of biodiesel decomposition chemistry on elastomer compatibility; Fuel; 2018, 233(12), 714-723; 10.1016/j.fuel.2018.06.107; (PubID106715)

11. Neti, V.; Das, S.; Brown, S.; Janke, C.J.; Kuo, L-J.; Gill, G.; Dai, S.; Mayes, R.T.; Efficient Functionalization of Polyethylene Fibers for the Uranium Extraction from Seawater through Atom Transfer Radical Polymerization; Industrial and Engineering Chemistry Research, 2017, 56 (38), 10826-10832; DOI: 10.1021/acs.iecr.7b00482 (PubID115331)

12. Kuo, L-J; Pan, H-B; Wai, C.M.; Byers, M; Schneider, E.; Strivens, J.E.; Janke, C.J.; Das, S; Mayes, R.T.; Wood, J.R.; Schlafer, N; Gill, G.A; Investigations into the reusability of amidoxime-based polymeric adsorbents for seawater uranium extraction; Industrial and Engineering Chemistry Research, 2017, 56 (40), 11603-11611; DOI: 10.1021/acs.iecr.7b02893; (PubID115334)

13. Kass, M.D., Janke, C.J., Connatser, R.M., Lewis, S.A., Keiser, J.R., Gaston, K.; Compatibility Assessment of Fuel System Infrastructure Plastics with Bio-oil and Diesel Fuel; Energy & Fuels; 2017, 31(1), 542-553; 10.1021/acs.energyfuels.7b03121; (PubID104692)

14. Pan, H.B.; Wai, C.M.; Kuo, L.J.; Gill, G.A.; Tian, G.; Rao, L.; Das, S.; Mayes, R.T.; Janke, C.J.; Bicarbonate Elution of Uranium from Amidoxime-based Polymer Adsorbents for Sequestering Uranium from Seawater; ChemistrySelect; May 2017, 2(13):3769-3774. DOI 10.1002/slct.201700177.

15. Du, Z., Janke, C.J., Li, L., Daniel, C., Wood, D.L., Electron beam curing of composite positive electrode for Li-ion battery; ‎J. Electrochem. Soc.; 2016, 163 (13), A2776-A2780. DOI: 10.1149/2.1171613jes.

16. Kass, M.D., Janke, C.J., Connatser, R.M., Lewis, S.A., Keiser, J.R., Gaston, K.; Compatibility Assessment of Fuel System Elastomers to Bio-oil and Diesel Fuel; Energy & Fuels; 2016, 30 (8), 6486-6494. DOI: 10.1021/acs.energyfuels.6b01138.

17. Das, S.; Brown, S; Mayes, R.T.; Janke, C.J.; Tsouris, C.; Kuo, L.J.; Gill, G.; Dai, S.; Novel Poly(imide dioxime) sorbents: Development and Testing for Enhanced Extraction of Uranium from Natural Seawater; Chemical Engineering Journal; 2016, 298, 125-135; DOI: 10.1016/j.cej.2016.04.013.

18. Keiser, J.R., Brady, M.P., Lewis, S.A., Connatser, R.M., Kass, M.D., Leonard, D.N., Janke, C.J., Materials Issues in Thermochemical Production, Processing and Utilization Of Bio-Oil. NACE-2016-7867; NACE International; Corrosion 2016, Vancouver, Canada, March 6-10, 2016.

19. Oyola, Y.; Jankc, C.J.; Dai, S.; Synthesis, development and testing of high surface area polymer-based adsorbents for the selective recovery of uranium from seawater. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4149-4160; DOI: 10.1021/acs.iecr.5b03981.

20. Brown, S.; Chatterjee, S.; Yue, Y.; Tsouris, C.; Janke, C.; Saito, T.; Dai, S.; Uranium adsorbent fibers prepared by atom-transfer radical polymerization from chlorinated polypropylene and polyethylene trunk fibers. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4130-4138; doi:10.1021/acs.iecr.5b03667.

21. Gill, G.A.; Kuo, L.J.; Janke, C.J.; Park, J.; Jeters, R.; Bonheyo, G.; Pan, H.B.; Wai, C.; Khangaonkar, T.; Bianucci, L.; Wood, J.; Warner, M.G.; Peterson, S.; Abrecht, D.; Mayes, R.T.; Tsouris, C.; Oyola, Y.; Strivens, J.E.; Schlafer, N.; Addleman, R.S.; Chouyyok, W.; Das, S.; Kim, J.; Buesseler, K.; Breier, C.; D’Alessandro, E.; The uranium from seawater program at the Pacific Northwest National Laboratory: Overview of marine testing, adsorbent characterization, adsorbent durability, adsorbent toxicity, and deployment studies. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4264-4277; doi:10.1021/acs.iecr.5b03649.

22. Park, J.; Gill, G.; Strivens, J.; Kuo, L.J.; Jeters, R.; Avila, A.; Wood, J.; Schlafer, N.; Janke, C.; Miller, E.; Thomas, M.; Addleman, R.S.; Bonheyo, G.T.; Effect of biofouling on the performance of amidoxime-based polymeric uranium adsorbents. Industrial and Engineering Chemistry Research; 2016, 55 (15), 4328-4338; doi: 10.1021/acs.iecr.5b03457.

23. Ladshaw, A.P.; Das, S.; Liao, W.P.; Yiacoumi, S.; Janke, C.J.; Mayes, R.T.; Dai, S.; Tsouris, C.; Experiments and modeling of uranium uptake by amidoxime-based adsorbent in the presence of other ions in simulated seawater. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4241-4248; doi: 10.1021/acs.iecr.5b03456.

24. Pan, H.B.; Kuo, Miyamoto, N.; Wood, J.R.; Strivens, J.E.; Gill, G.A.; Janke, C.J.; Wai, C.M.; Elution of uranium and transition metals from amidoxime-based polymer adsorbents for sequestering uranium from seawater. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4313-4320; doi: 10.1021/acs.iecr.5b03307.

25. Kuo, L.J.; Janke, C.J.; Wood, J.R.; Strivens, J.E.; Gill, G.A; Characterization and testing of amidoxime-based adsorbent materials to extract uranium from natural seawater. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4285-4293; doi: 10.1021/acs.iecr.5b03267.

26. Das, S.; Liao, W.P.; Flicker Byers, M.; Tsouris, C.; Janke, C.J.; Mayes, R.T.; Schneider, E.; Kuo, L.J.; Gill, G.; Dai, S.; Alternative alkaline conditioning of amidoxime based adsorbent for uranium extraction from seawater. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4303-4312; doi: 10.1021/acs.iecr.5b03210.

27. Das, S.; Mayes, R.T.; Janke, C.J.; Kuo, L.J.; Gill, G.; Wood, J.; Dai, S.; Extracting Uranium from Seawater: Promising AF Series Adsorbents. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4110-4117; doi: 10.1021/acs.iecr.5b03136.

28. Das, S.; Mayes, R.T.; Janke, C.J.; Kuo, L.J.; Gill, G.; Wood, J.; Dai, S.; Extracting Uranium from Seawater: Promising AI Series Adsorbents. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4103-4109; doi: 10.1021/acs.iecr.5b03135.

29. Mehio, N.; Williamson, B.; Oyola, Y.; Mayes, R.T.; Janke, C.; Brown, S.; Dai, S.; Acidity of the Poly(acrylamidoxime) Adsorbent in Aqueous Solution: Determination of the Proton Affinity Distribution via Potentiometric Titrations. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4217-4223; doi: 10.1021/acs.iecr.5b03211.

30. Pan, H.B.; Kuo, L.J.; Wood, J.; Strivens, J.; Gill, G.A.; Janke, C.J.; Wai, C.M.; Towards understanding KOH conditioning of amidoxime-based polymer adsorbents for sequestering uranium from seawater. RSC Advances, 2015, 5, 100715-100721. DOI: 10.1039/C5RA14095A.

31. Das, S.; Tsouris, C.; Zhang, C.; Brown, S.; Janke, C.J.; Mayes, R.T.; Kuo, L.J.; Gill, G.; Dai, S.; Enhancing Uranium Uptake by Amidoxime Adsorbent in Seawater: An investigation for optimum alkaline conditioning parameters. Industrial and Engineering Chemistry Research, 2016, 55 (15), 4294-4302; doi:10.1021/acs.iecr.5b02735.

32. Kass, M., Janke, C., Connatser, R., Lewis, S. et al., "Compatibility Assessment of Elastomeric Infrastructure Materials with Neat Diesel and a Diesel Blend Containing 20 Percent Fast Pyrolysis Bio-oil," SAE Int. J. Fuels Lubr. 8(1):2015, doi: 10.4271/2015-01-0888.

33. Kass, M., Janke, C., Connatser, R., Lewis, S. et al., "Compatibility Assessment of Plastic Infrastructure Materials with Off-Highway Diesel and a Diesel Blend Containing 20 Percent Fast Pyrolysis Bio-Oil," SAE Int. J. Fuels Lubr. 8(1):2015, doi: 10.4271/2015- 01-0893.

34. Kass, M., Janke, C., Theiss, T., Baustian, J. et al., "Compatibility Assessment of Plastic Infrastructure Materials with Test Fuels Representing E10 and iBu16," SAE Int. J. Fuels Lubr. 8(1):2015, doi: 10.4271/2015-01-0894.

35. Saito, T.; Brown, S; Chatterjee, S; Kim, J.; Tsouris, C; Mayes, R.; Kuo, L.J.; Gill, G.; Oyola, Y.; Janke, C.J.; Dai, S.; Uranium Recovery from Seawater: Development of Fiber Adsorbents Prepared via Atom-Transfer Radical Polymerization. Journal of Materials Chemistry A, 2014, 2 (35), 14674-14681.

36. Pan, H.B; Liao, W.; Wai, C.M.; Oyola, Y.; Janke, C.J.; Tian, G.; Rao, L.; Carbonate-H2O2 Leaching for Sequestering Uranium from Seawater. Dalton Transactions, 2014, 43, 10713-10718. Selected for journal front cover.

37. Britt, P.F., Dai, S., Hay, B., Janke, C.J., Mayes, R.T., Saito, T., Tsouris, C., Rao, L.; Development of Polymeric Adsorbents for Recovery of Uranium from Seawater. The International Symposium on Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM 2014). Vienna, Austria, June 23-27, 2014; IAEA-CN-216/82.

38. Kass, M.D.; Janke, C.J.; Theiss, T.; Pawel, S.; Baustian, J.; Wolf, L.; Koch, W.; Compatibility Assessment of Plastic Infrastructure Materials to Test Fuels Representing Gasoline Blends Containing Ethanol and Isobutanol. SAE Intl., J. Fuels Lubr., Volume 7, Issue 2, June 2014.

39. Kass, M.D.; Janke, C.J.; Theiss, T.; Pawel, S.; Baustian, J.; Wolf, L.; Koch, W.; Compatibility Assessment of Elastomer Materials to Test Fuels Representing Gasoline Blends Containing Ethanol and Isobutanol. SAE Intl., J. Fuels Lubr., Volume 7, Issue 2, 2014.

40. Kim, J.; Tsouris, C.; Oyola, Y.; Janke, C.J.; Mayes, R.T.; Dai, S.; Gill, G.; Kuo, L.J.; Wood, J.; Choe, K.Y.; Schneider, E.; Lindner, H.; Uptake of Uranium from Seawater by Amidoxime-Based Polymeric Adsorbent: Field Experiments, Modeling, and Updated Economic Assessment. Ind. Eng, Chem. Res., 2014, 53 (14), 6076-6083.

41. Kim, J.; Tsouris, C.; Mayes, R.; Oyola, Y.; Saito, T.; Janke, C.; Dai, S.; Schneider, E.; Sachde, D., Recovery of Uranium from Seawater: A Review of Current Status and Future Research Needs. Separation Science and Technology, 2013, 48, 367-387.

42. Kim, J.; Tsouris, C.; Oyola, Y.; Hexel, C.; Mayes, R.; Janke, C.; Dai, S., Characterization of Uranium Uptake Kinetics from Seawater in Batch and Flow-Through Experiments. Ind. Eng. Chem. Res. 2013, 52, 9433-9440.

43. Kim, J.; Tsouris, C.; Oyola, Y.; Mayes, R.; Hexel, C.; Janke, C.; Dai, S., Uranium from Seawater: Adsorption Tests. Nuclear Engineering International, 2013, 58 (702) 34-35.

44. Tian, C.; Oyola, T.; Nelson, K.; Janke C.J.; A renewable HSO3/H2PO3-grafted polyethylene fiber catalyst: an efficient heterogeneous catalyst for the synthesis of 5-hydroxymethylfurfural from fructose in water. RSC Advances, 2013, 3 (44) 21242-21246.

45. Kass, M.; Theiss, T.; Janke, C.; Pawel, S.; Chapin, J.T.; Yang, E.; Boyce, K., Compatibility of Elastomers with Test Fuels of Gasoline Blended with Ethanol. Sealing Technology 2012, 12, 7-12.

46. Mansur, L.K.; Bhattacharya, R.; Blau, P.J.; Clemons, A.; Eberle, C.C.; Evans, H.B.; Janke, C.J.; Jolly, B.C.; Lee, E.H.; Leonard, K.J.; Trejo, R.M.; Rivard, J.D.K.; Super Hard Surfaced Polymers. SAMPE 2010, Seattle, WA - Spring Conference, May 17-20, 2010.

47. Ng, S.; Meilunas, R.; Janke, C.J.; Eberle,C.; Fisher, W.; Fisher, J.; Laser Induced Fluorescence Based Nondestructive Evaluation of Heat Damaged Composite Aircraft. National Space & Missiles Materials Symposium, Henderson, NV on June 22-25, 2009.

48. Meilunas, R.; Ng, S.; Janke, C.J.; Fisher, W.; Laser-Induced Fluorescence Based Non-Destructive Evaluation of Heat Damaged Aircraft Composites. 53rd Intl. SAMPE Symposium and Exhibition, Long Beach, CA May 18-22, 2008.

49. Janke, C.J.; Status Report - EB Interface CRADA. AFOSR E-Beam Panel Discussion, 47thInternational SAMPE Symposium 2002, May 12-16, 2002, Long Beach, CA, 47, 2002.

50. Frame, B.J.; Wrenn, G.E.; Janke, C.J.; Results of Electron Beam Prepreg Debulking Study. 47th International SAMPE Symposium 2002, May 12-16, 2002, Long Beach, CA, 47, 65-77, 2002.

51. Foedinger, R.; Schneider, T.; Grande, R.; Malghan, S.; Walton, T.; Norris, R.; Frame, B.; Janke, C.J.; Evans, R.; Development of Electron Beam Curable Composite Motor Cases. 47th International SAMPE Symposium 2002, May 12-16, 2002, Long Beach, CA, 47, 570-584, 2002.

52. Janke, C.J.; Lomax, R.D.; Robitaille, S.; Duggan, S.; Serranzana, R.C.; Lopata, V.J.; Improved Epoxy Resins Cured by Electron Beam Irradiation. 46th International SAMPE Symposium 2001, May 6-10, 2001, Long Beach, CA, 46, 2048, 2001.

53. Bechel, V.; Janke, C.J.; Wilenski, M.; Tandon, G.P.; Constituent Level Examination of an E-Beam Cured Graphite/Epoxy Composite. 46th International SAMPE Symposium 2001, May 6-10, 2001, Long Beach, CA, 46, 2115, 2001.

54. Norris, R.E.; Janke, C.J.; Eberle, C.; Wrenn, G.E.; Electron Beam Curing of Composites Overview. Proc. 2000 Future Car Congress, Arlington, VA, April 2 – 6, 2000, SAE paper 2000-01-1525.

55. Derriso, M.M.; Coghlan, S.; Janke, C.J.; Liquid Hydrogen Permeability Testing on Electron Beam Processed Gr/Ep Panels. Proc. National Space & Missile Materials Symposium, San Diego, CA, Feb 28 – Mar 2, 2000.

56. Foedinger, R.; Rea, D.; Grande, R.; Davis, C.; Norris, R.; Janke, C.J.; Walton, T.; Vandiver, T.L.; Electron Beam Curing of Filament Wound Composite Pressure Vessels. 44th International SAMPE Symposium, Long Beach, CA, 44, 248, 1999.

57. Janke, C.J.; Lopata, V.J.; Analysis of Identical Epoxy Resin Formulations Cured Thermally or by Electron Beam. 44th International SAMPE Symposium, Long Beach, CA, 44, 602, 1999.

58. Janke, C.J.; Yarborough, K.; Drzal, L.T.; Fiber-Matrix Interface Studies on Electron Beam Cured Composites. 44th International SAMPE Symposium, Long Beach, CA, 44, 647, 1999.

59. Lopata, V.J.; Saunders, C.B.; Singh, A.; Janke, C.J.; Wrenn, G.E.; Havens, S.J.; Electron Beam Curable Epoxy Resins for The Manufacture of High-Performance Composites. Radiation Physics and Chemistry, 56 (4), 405-415, Oct. 1999; ISSN 0969-806X, (99)00330-8.

60. Farmer, J.D.; Janke, C.J.; Lopata, V.J.; The Electron Beam Cure Of Epoxy Paste Adhesives. 43rd International SAMPE Symposium, Anaheim, CA, 43, 1639, 1998.

61. Farmer, J.D.; Janke, C.J.; Lopata, V.J.; Electron Beam Cure of Composite T-38 Windshield Frame/Arch. 43rd International SAMPE Symposium, Anaheim, CA, 43, 1647, 1998.

62. Roylance, M.E.; Janke, C.J.; Tuss, J.M.; Affordable Composite Structures Via Electron Beam Curing. 43rd International SAMPE Symposium, Anaheim, CA 43, 1660, 1998.

63. Janke, C.J.; Norris, R.E.; Yarborough, K.; Havens, S.J.; Lopata, V.J.; Critical Parameters for Electron Beam Curing of Cationic Epoxies and Property Comparison of Electron Beam Cured Cationic Epoxies Versus Thermal Cured Resins and Composites. 42nd International SAMPE Symposium, Anaheim, CA, 42, 477, 1997.

64. Farmer, J.D.; Janke, C.J.; Lopata, V.J.; The Electron Beam Cure of Fiberglass/Epoxy Prepregs. 29th International SAMPE Technical Conference, Orlando, FL, 1997.

65. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Meador, M.A.; Electron Beam Cured Epoxy Resin Composites for High Temperature Applications. Proc. PPM and Other Propulsion R&T Conference, NASA Conference Publication 10193, Cleveland, OH, 1997.

66. Powell, G.L.; Janke, C.J.; Barber, T.E.; Nondestructive Inspection of Heat Damage to Graphite-Epoxy Laminates Using Diffuse Reflectance Fourier Transform Infrared Spectroscopy (DRIFTS). 29th International SAMPE Technical Conference, Orlando, Florida, 29, 766-775, 1997.

67. Lopata, V.J.; Chung, M.; Janke, C.J.; Havens, S.J.; Electron Beam Curing of Epoxy Resins: Initiator and Concentration Effects on Curing Dose and Rheological Properties. 28th International SAMPE Technical Conference, Seattle, WA, 28, 901, 1996.

68. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Toughened Epoxy Resins Cured by Electron Beam Radiation. 28th International SAMPE Technical Conference, Seattle, WA, 28, 877, 1996.

69. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Electron Beam Curing of Epoxy Resins by Cationic Polymerization. 41st International SAMPE Symposium, Anaheim, CA, 41, 196, 1996.

70. Fisher, W.G.; Storey, J.M.E.; Sharp, S.L.; Janke, C.J.; Wachter, E.A.; Nondestructive Inspection of Graphite-Epoxy Composites for Heat Damage Using Laser-Induced Fluorescence. Applied Spectroscopy, v 49, n 9, 1995, pp 1225-1231.

71. Fisher, W.G., Janke, C.J., Wachter, E.A., and Powell, G.L.; Fluorescence Characterization of Thermal Damage in Fiber-Reinforced Polymer-Matrix Composites. Pittcon '94, Chicago, Feb.27-Mar.4, 1994.

72. Janke, C.J.; Powell, G.L.; Smyrl, N.R.; Wachter, E.A.; Fisher, W.G.; Philpot H.E.; Lucania, J.; Milosevic, M.; Auth, G.; Composite Heat Damage Assessment. Proc. Conf. on Characterization and NDE of Heat Damage in Graphite Epoxy Composites, Orlando, FL, Apr.27-29,1993, Nondestructive Testing Information Analysis Center, Austin, TX, 97, 1993.

73. Muhs, J.D.; Allison, S.W.; Janke, C.J.; et. al.; Fiberoptic sensor integration and multiplexing techniques for smart skin applications. Active Materials and Adaptive Structures, 1992, 895-899.

74. Tortorelli, L.J.; Tinsley, P.W.; Woods, C.; Janke, C.J.; Electrochemical Oxidative Addition of Chloride to Rh2(μ-dppm)2(CO)2Cl2. Polyhedron 1988, 7, 315.

75. Janke, C.J.; Tortorelli, L.J.; Burn, J.L.E.; Tucker, C.A.; Woods, C.; Synthesis, Characterization, and Reactivity of Phosphine- and Arsine-Bridged Dirhodium Complexes Containing Bridging Pyrazolate and Triazolate Ligands. Inorg. Chem. 25, 1986, 4597–4602.

Technical Reports and Milestone Reports:

1. Co-authored Final Project Report entitled, “Advanced Adsorbent Development Employing Radiation-Induced Graft Polymerization”. This report was co-authored by Janke, C.J.; Mayes, R.T.; Das, S.; Oyola, Y.; Dai, S. and summarized the findings from work conducted from 2010-2017 on the “Uranium Extraction from Seawater” Project which was funded by the DOE’s Office of Nuclear Energy.

2. Mayes, R.T.; Janke, C.J.; et. al.; DOE Milestone Report, Level 4 Milestone Report, M4FT-17OR030201039: Chaotropic agents as base alternatives for adsorbent conditioning – August 18, 2017. (PubID)

3. Janke, C.J.; Mayes, R.T.; Das, S.; Dai, S.; DOE Milestone Report, Level 4 Milestone Report, M4FT-17OR0302010312: Optimization of current fiber adsorbents for uranium – September 15, 2017. (PubID)

4. Kuo, L.J.; Gill, G.; Tsouris, C.; Rao, L; Pan, H.B.; Wai, C.M.; Janke, C.J.; Strivens, J.; Wood, J.; Schlafer, N.; D’Alessandro, E.; DOE Milestone Report, Level 4 Milestone Report (PNNL-26418) - Temperature Effects on the Adsorption Capacity of Uranium and Vanadium on Amidoxime-Based Polymeric Fiber Adsorbents in Natural Seawater – May 2017. (PubID100346)

5. Mayes, R.T.; Janke, C.J.; Das, S.; Popovs, I.; DOE Milestone Report, M2FT-17OR030201031: Demonstrate 3-fold Enhancement in Selectivity Toward Uranium Relative to Vanadium (V/U: 1.25) in Seawater Extractions – April 25, 2017.

6. Wood, D.; Du, Z.; Janke, C.J.; Li, J.; Daniel, C.; Towards Solventless Processing of Thick Electron-Beam (EB) Cured LIB Cathoes (IV.E.4); DOE VTO 2016 Advanced Battey R&D Annual Progress Report (APR-16); Nov. 2016.

7. Janke, C.J; Das, S.;.; Mayes, R.T.; Dai, S.; Schlafer, N.; Strivens, J.E.; Wood, J.; Kuo, L.J.; Gill, G; Double uranium/vanadium selectivity for polymer fiber adsorbents. DOE Milestone Report, M3FT-16OR0302010313 - September 30, 2016. ORNL/LTR-2016/534 (PubID 70266).

8. Gill, G.; Kuo, L.J.; Strivens, J.; Wood, J.; Schlafer, N.; Janke, C.J.; Das, S.; Mayes, R.T.; Saito, T.; Brown, S.; Tsouris, C.; Wai, C.M.; Pan, H.B.; DOE Milestone Report, M3FT-16PN030201044; Summary of Adsorption Capacity and Adsorption Kinetics of Uranium and Other Elements on Amidoxime-based Adsorbents from Time Series Marine Testing at the Pacific Northwest National Laboratory; September 2016. (PubID102619)

9. Janke, C.J.; Du, Z.; Wood, D.L.; Eberle, C.; Li, J.; Daniel, C.; SMART Milestone Report 6/30/2016 - Ultraviolet and Electron Beam Processing of LIB Electrodes.

10. Mayes, R.T.; Das, S.; Janke, C.J.; Kuo, L.J.; Wood, J.; Gill, G.; Dai, S.; Demonstrate hydrophilic supports with a uranium capacity of over 1.5 g/kg in 21 days or over 4 g/kg in 56 days. DOE Milestone Report, M4FT-16OR0302010315. Report No. ORNL/LTR-2016/167. April 15, 2016.

11. Saito, T.; Brown, S.; Das, S.; Mayes, R.; Janke, C.; Dai, S.; Kuo, L.J.; Strivens, J.; Schlafer, N.; Wood, J.; Gill, G.; Flicker Byers, M.; Schneider, E.; New Fiber Materials with Sorption Capacity at 5.0 g-U/kg Adsorbent under Marine Testing Conditions. DOE Milestone Report, FCRD-2016-M2FT-16OR030201031. March 30, 2016.

12. Eberle, C.; Daniel, C.; Janke, C.J.; Wood, D.L.; Du, Z., Li, J.; Milestone Report – 12/31/2015 - Ultraviolet and Electron Beam Processsing of LIB Electrodes - Business Case for Electron Beam Processing of Battery Materials.

13. Kass, M.D.; Theiss, T.J.; Janke, C.J.; Ethanol-enabled high-octane gasoline: assessing infrastructure material compatibility. ORNL Report. ORNL/TM-2015/613. October 2015.

14. Tsouris, C.; Liao, W.P.; Das, S.; Mayes, R.; Janke, C.; Dai, S.; Kuo, L.J.; Wood, J.; Gill, G.; Flicker Byers, M.; Schneider, E.; Adsorbent alkali conditioning for uranium adsorption from seawater: adsorbent performance and technology cost evaluation. DOE Milestone Report, FCRD-2015-M2FT-15OR0310042. September 30, 2015.

15. Saito, T.; Chatterjee, S.; Johnson, C; Janke, C.J.; Dai, S.; Brown, S.; Demonstrate new fiber materials (ATRP or RIGP) with sorption capacity at 4.5 g U/kg adsorbent under marine testing conditions and uptake of 3.5 g U/kg in 28 days. DOE Milestone Report, M3FT-15OR03100414. 7/31/15.

16. Das, S.; Janke, C.J.; Mayes, R.T.; Brown, S.; Tsouris, C.; Dai, S.; Kuo, L.J.; Gill, G.; Wood, J.; Demonstrate Novel Adsorbents with Uranium Capacity Greater than 4.0 g U/kg Adsorbent in Marine Testing. DOE Milestone Report, M3FT-15OR03100412. 6/30/2015. ORNL/LTR-2015/315.

17. Das, S.; Tsouris, C.; Zhang, C.; Brown, S.; Janke, C.J.; Mayes, R.T.; Dai, S.; Kuo, L.J.; Gill, G.; Status Report on Alkaline Conditioning Studies. DOE Milestone Report, M4FT-15OR03100421. 4/30/2015. ORNL/LTR-2015/189.

18. Janke, C.J.; Das, S.; Oyola, Y.; Mayes, R.T.; Gill, G.; Kuo, L.J.; Wood, J.; Demonstrate Braided Material with 3.5 g U/kg Sorption Capacity under Seawater Testing Condition. DOE Milestone Report M2FT-15OR0310041. 1/30/2015. ORNL/LTR-2015/37.

19. Janke, C.J.; Mayes, R.T.; Norris, R.E.; Acid Project – Final Report. 12/31/2014.

20. Saito, T.; Chatterjee, S.; Johnson, J.C.; Tsouris, C.; Mayes, R.T.; Janke, C.J.; Capacity determination in seawater for ATRP-based fibrous adsorbents. DOE Milestone Report, M3FT-14OR0310016. 10/1/2014. ORNL/LTR-2014/435.

21. Gill, G.; Kuo, L.J.; Wood, J.; Janke, C.J.; Complete laboratory evaluation and issue a report on the impact of temperature on uranium adsorption. DOE Milestone Report, M2FT-14PN0310021. 9/20/2014. ORNL/LTR-2014/427.

22. C. Janke, S. Das, Y. Oyola, R. Mayes, G. Gill, L. Kuo, J. Wood; Complete new adsorbent materials for marine testing to demonstrate 4.5 g-U/kg adsorbent. DOE Milestone Report, M2FT-14OR03100115. 8/20/2014. ORNL/LTR-2014/318.

23. C. Janke, Y. Oyola, S. Das, R. Mayes, G. Gill, L. Kuo, J. Wood; Complete advanced adsorbents for marine testing to demonstrate 4 g-U/kg adsorbent. DOE Milestone Report, M3FT-14OR0310014. 7/30/2014. ORNL/LTR-2014/275.

24. B. Hay, S. Vukovic, C. Grant, S. Kang, T. Saito, S. Chatterjee, C. Janke, S. Das, R. Mayes, N. Mehio, S. Dai; Recommendations for alternative ligands. DOE Milestone Report, M4FT-14OR0310019. 6/30/2014. ORNL/LTR-2014/249.

25. Britt, P.F., Dai, S., Hay, B., Janke, C.J., Mayes, R.T., Saito, T., Tsouris, C., Rao, L.; Development of Polymeric Adsorbents for Recovery of Uranium from Seawater. The International Symposium on Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM 2014). Vienna, Austria, June 23-27, 2014.

26. C. Tsouris, S. Das, J. Kim, R. Mayes, C. Janke, L. Kuo, G. Gill; Optimization parameters for base conditioning. DOE Milestone Report, M3FT-14OR03100113. 6/20/2014. ORNL/LTR-2014/232.

27. Janke, C.J.; Mayes, R.T.; Das, S.; Complete Braided Adsorbent for Marine Testing to Demonstrate 3g-U/kg-adsorbent . DOE Milestone Report, M3FT-14OR0310013. 4/30/2014. ORNL/LTR-2014/164.

28. Janke, C.J.; Mayes, R.T.; Das, S.; Preparation of Most Promising Braided and/or Textile-Based Adsorbents for Seawater Testing. DOE Milestone Report, M3FT-14OR0310012. 2/28/2014. ORNL/LTR-2014/52.

29. Janke, C.J.; Oyola, Y.; DOE Milestone Report - Prepare the Most Promising Polymer-Based Adsorbents for Marine Testing. ORNL/LTR-2013/27 (M3FT-13OR0310035). 1/24/2013.

30. Dai, S.; Mayes, R.; Sun, X.G.; Janke, C.; Rao, L.; Hay, B.; Schneider, E.; Gill, G.; Tsouris, C., DOE Office of Nuclear Energy Fuel Resources Uranium from Seawater Program - Final Program Review Document, June 13, 2013, Oak Ridge, TN. ORNL Report - ORNL/TM-2013/295.

31. Kass, M.; Janke, C.; Pawel, S.; Thomson, J.; Meyer, H.; Theiss, T., Compatibility Study for Plastic, Elastomeric and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Isobutanol-Blended Gasoline. ORNL Report - ORNL/TM-2013/243, July 19, 2013.

32. Brouner, J., Janke, C.J.; Heavy Metal Fishing, New Technology at ORNL May Secure Nuclear Energy for Hundreds of Years, Oak Ridge National Laboratory REVIEW, Vol. 46, No. 1, 16-17, 2013, Disruptive Materials.

33. Kim J., Tsouris, C., Mayes R.T., Oyola Y., Saito T., Janke C.J., Dai S., Schneider E., Sachde D.J.; Recovery of Uranium from Seawater: A Review of Current Status and Future Research Needs. Separation Science and Technology, 2013, 48 (3) 367-387.

34. Tsouris, C., Janke, Chris, et al. Laboratory and Field Testing of Uranium Uptake from Seawater. ORNL/LTR-2012/249. Oak Ridge, TN: Oak Ridge National Laboratory. 2012.

35. Janke C.J., Oyola Y., Felker L.K.; Selection and Preparation of Most Promising Adsorbent Materials for Larger-Scale Marine Testing. DOE Milestone Report. ORNL/LTR-2012/112 (M3FT12OR310023). Oak Ridge, TN; Oak Ridge National Laboratory 2012.

36. Kass M.D., Janke C., et al; Analysis of Underground Storage Tanks System Materials to Increased Leak Potential Associated with E15 Fuel. ORNL/TM-2012/182. Oak Ridge, TN: Oak Ridge National Laboratory. July 2012.

37. Kass M. D.; Janke C., et al; Compatibility Study for Plastic, Elastomeric, and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Ethanol-blended Gasoline. ORNL/TM-2012/88. Oak Ridge, TN: Oak Ridge National Laboratory. April 2012.

38. Janke, C.J.; Oyola, Y.; DOE Milestone Report - M21FR040201: Accomplish Adsorption Experiments at 6 g-U/kg Adsorbent. ORNL/LTR-2011/332, Sept. 2011.

39. Janke, C.J.; Mayes, R.T.; Oyola, Y.; Brown, S.; DOE Milestone Report - M31FR040502: Evaluate High-Surface-Area Fiber Materials for Adsorbent Preparation, ORNL Report Number ORNL/LTR-2011/247, July 28, 2011.

40. Kass, M.D. Theiss, T.J.; Janke, C.J.; Pawel, S.J.; Lewis, S.A.; Intermediate Ethanol Blends Infrastructure Materials Compatibility Study: Elastomers, Metals, and Sealants. ORNL/TM-2010/326, March 2011.

41. McGinniss, V.; Wilenski, M.S.; Janke, C.J.; CRADA Final Report, CRADA number NFE-08-01751, New Electron Beam Curable Polymers with High Adhesion and Toughness. February 13, 2011, ORNL Report Number ORNL/TM-2011/4.

42. Janke, C.J.; Oyola, Y.; Sun, X.G.; Dai, S.; Felker, K.L.; Synthesis of Uranium Adsorbent Materials. ORNL Report Number ORNL/LTR-2010/314, November 2010.

43. Pawel, S.J.; Kass, M.D.; Janke, C.J.; Preliminary Compatibility Assessment of Metallic Dispenser Materials for Service in Ethanol Fuel Blends. October 2009, ORNL/TM-2009/286.

44. Fisher, W.; Janke, C.J.; Fisher, J.; Final Report-Phase I Navy SBIR on Non-Contact Cure State Measurement of Adhesives, Coatings and Sealants Using Laser-Induced Fluorescence. Naval Air Warfare Center, Patuxent River, MD, April 28, 2009.

45. Hansen, J.; Janke, C.J.; Hoffman, G.; Lube Oil Compatibility Testing (U), TER-0037, January 21, 2009.

46. Janke, C.J.; et. al; Accelerated Compatibility Experiments of Dispenser Materials, Department of Energy, Washington, DC, December 17, 2008.

47. Klett, J.W.; Janke, C.J.; Eberle, C.; Out-of-Autoclave Stabilization/Carbonization of Pitch-Based-Carbon Composites and other Pitch Materials. ORNL LDRD Report; 2006.

48. Janke, C.J.; Spruiell, J.E.; A Review of The Measurement and Development of Crystallinity and Its Relation to Properties in Neat Poly(Phenylene Sulfide) and Its Fiber Reinforced Composites. ORNL/TM-2004/304, August 2004.

49. Janke, C.J.; Eberle, C.C.; Johnson, M.A.; Kriebel, J.; Sharpe, G.; Uribe, R.M.; Vargas-Aburto, C.; Wang, C.S.; Final Report for CRADA No. ORNL01-0616, Efficient, High Volume Production of Ultra-Light Auto Body Panels, ORNL/TM-2003/129, 2003.

50. Janke, C.J.; Sands, J.A.; Wilenski, M.S.; Final Report for CRADA No. ORNL99-0544, Interfacial Properties of Electron Beam Cured Composites, ORNL/TM-2003/130, 2003.

51. Janke, C.J.; Structure-Processing-Property Relationships at the Fiber-Matrix Interface in Electron-Beam Cured Composite Materials. ORNL-6947 Report, November 1998.

52. Janke, C.J., Howell D.; Norris, R.E.; Final Report for CRADA No. Y1293-0233 Electron Beam Curing of Polymer Matrix Composites, ORNL/M-6115, 1998.

53. Janke, C.J.; et. al.; Electron Beam Curing of Polymer Matrix Composites. Final CRADA Report May 1997, Dept. of Energy CRADA No. Y-1293-0233, ORNL/M6115.

54. Hawsey, R.A.; Janke, C.J., et. al.; FY 1993 Report on ORNL Superconducting Technology Program for Electric Power Systems. Report ORNL/HTSPC-5 in support of the High Temperature Superconductor Project, 1993.

55. Norris, R.E.; Janke, C.J.; Campbell, V.W.; Weight Reduction Possibilities for M116A2 Army Trailers, ORNL/ATD-66, 1992.

56. Frame, B.J.; Janke, C.J.; 1991. Fiberglass Material Specification III, ORNL/ATD-63.

57. Frame, B.J.; Janke, C.J.; 1991. Fiberglass Material Specification II, ORNL/ATD-54/R1.

58. Frame, B.J.; Janke, C.J.; 1991. Fiberglass Material Specification II, ORNL/ATD-54.

59. Janke, C.J.; 1991. Fiberglass Material Specification, ORNL/ATD-53.

60. Janke, C.J.; Muhs, J.D.; Wachter, E.A.; Ziegler, R.E.; Powell, G.L.; Smyrl, N.R.; Philpot, H.E.; Composite Heat Damage Spectroscopic Analysis. ORNL/ATD-42, 1990. Oak Ridge National Laboratory, Oak Ridge, TN.

61. Frame, B.J.; Janke, C.J.; Simpson, W.A.; Ziegler, R.E.; Philpot, H.E.; Composite Heat Damage, Part I. Mechanical Testing of IM6/3501-6 Laminates, Part 2. Nondestructive Evaluation Studies of IM6/3501-6 Laminates. ORNL/ATD-33, 1990. Oak Ridge National Laboratory, Oak Ridge, TN.

Abstracts, Posters, Presentations, Workshops:

1. Kass, M.; Janke, C.J.; Connatser, M.; Lewis, S.; Keiser, J.; Compatibility of fast-pyrolysis bio-oil with infrastructure elastomer materials; TCBiomassPlus2019; Oct. 2019; Chicago, IL. (PubID133440).

2. Saito, T.; Britt, P.; Naskar, A.; Bowland, C.; Janke, C.J.; Feng, Z.; Peter, B.; Kunc, V.; Rios, O.; Biswas, K.; Hun, D.; ORNL capability for ARPA-E Repair composite formulation, fabrication and inspection; ARPA-E Workshop; Oct. 2019, Washington, DC. (PubID133782).

3. Bronson, B.; Mazerolle, D.; Kass, M.; Janke, C.J.; Connatser, R.; Keiser, J.; Robinson, T.; Preto, F.; Material selection for fast pyrolysis bio-oil treatment, handling, and deliver systems; tcbiomassplus2019 – The Intl. Conf. on thermochemical conversion science:Biomass & municipal solid waste to RNG, Biofuels & chemicals; Oct. 2019; Rosemont, IL. (PubID134329).

4. Keiser, J.R.; Lewis, S.A.; Connatser, R.M.; Jun, J.; Kass, M.; Janke, C.J.; Qu, J.; Brady, M.P.; Corrosion and chemical characterization of bio-oils from biomass with varying ash and moisture contents; Corrosion 2020 Conference and Expo, March 2020, Houston, TX, NACE International; (PubID126221).

5. Du, Z.; Janke, C.J.; Li, J.; Daniel, C.; Wood, D.; Towards Solventless Processing of Thick Electron-Beam (EB) Cured Lithium-Ion Battery Electrodes; 235th ECS Meeting (The Electrochemical Society), May 26-31, 2019, Dallas, TX (Batteries and Energy Storage); Presentation (PubID126821).

6. Du, Z.; Janke, C.J.; Li, J.; Wood, D.; Radiation Curing and Its Application in Li Cells; 235th ECS Meeting, May 26-31, 2019, Dallas, TX; Abstract (PubID126820).

7. Connatser, R.; Kass, M.; Janke, C.J.; Keiser, J.; Lewis, S.; Elastomer and Plastic Compatibility with a Pyrolysis-Derived Bio-Oil; NACE2019, March 24-28, 2019, Nashville, TN; Presentation (PubID125357).

8. Kass, M.; Janke, C.J.; Connatser, R.; West, B.; Szybist, J.; Sluder, S.; Influence of Biodiesel Decomposition Chemistry on Elastomer Compatibility; International Powertrains, Fuels & Lubricants Meeting, Jan. 22-24, 2019, San Antonio, TX; Presentation (PubID121817).

9. Kass, M.; Janke, C.J.; Connatser, R.; Lewis, S; Keiser, J.; Compatibility of Infrastructure Polymers with Bio-oils; Thermal & Catalytic Sciences Symposium (TCS), Oct. 8-10, 2018, Auburn, AL; Presentation (PubID118804).

10. Du, Z.; Janke, C.J.; Li, J.; Daniel, C.; Wood, D.; Towards Solventless Processing of Thick Electron-Beam (EB) Cured Lithium-Ion Battery Electrodes; 2019 DOE Vehicle Technologies Office Annual Merit Review (AMR) on June 10-13, 2019 in Arlington, VA. Presentation and Abstract (BAT207) (PubID126821).

11. Bronson, B.; Mazerolle, D.; Robinson, T.; Preto, F.; Kass, M.; Janke, C.J.; Connatser, R.; Keiser, J.; Material Selection for Fast Pyrolysis Bio-Oil Fuel Treatment, Handling and Delivery Systems; tcbiomass plus 2019, The International Conference on Thermomechanical Conversion Science: Biomass & Municipal Solid Waste to RNG, Biofuels & Chemicals; Oct. 7-9, 2019, Rosemont, IL; Presentation and Abstract.

12. Kass, M.; Janke, C.J.; Connatser, R.; Keiser, J.; Lewis, S.; Gaston, K.; Elastomer and Plastic Compatibility with a Pyrolysis-derived Bio-oil; Proceedings of NACE Corrosion Conference and Expo, Proceedings of Corrosion 2019, March 2019, Vol. 2019, Issue 01, pgs. 1-14.; Conference paper and Abstract (PubID120944).

13. Du, Z.; Janke, C.J.; D. Wood,; Li, J.; ORNL EB Pilot Line Proposal Discussion. Presented to U.S. DOE Vehicle Technologies Office Personnel David Howell and Michael Berube on July 25, 2018 at ORNL.

14. Brady, M.; Keiser, J.; Janke, C.J.; Kass, M.; ORNL Proposal to Study Pipeline Materials Issues. Presented to Tim Reinhardt, Director of Supply & Delivery, Office of Oil & Natural Gas, US Department of Energy on May 1, 2018 at ORNL.

15. Du, Z.; Janke, C.J.; Li, J.; Daniel, C.; Wood, D.; Towards Solventless Processing of Thick Electron-Beam (EB) Cured Lithium-Ion Battery Electrodes. 232nd ECS Meeting (The Electrochemical Society), Oct. 1-5, 2017, Washington, DC. Abstract and Presentation (PubID103929).

16. Kass, M., Janke, C.J., Baustian, J., Koch W., Wolf, L.; Compatibility Assessment of Vehicle Fuel system Polymer Materials with Test Fuels Representing E10 and 16% Iso-butanol. WCX 2018 SAE International World Congress Experience (SAE International), April 9-13, 2018, Detroit, MI. Presentation (PubID 109838).

17. Wood, D., Du, Z.; Janke, C.J.; Li, J.; Daniel, C., Eberle, C.; Towards Solventless Processing of Thick Electron-Beam (EB) Cured Lithium-Ion Battery Electrodes. U.S. DOE Vehicle Technologies Office 2018 Annual Merit Review (AMR) on June 18-21, 2018 in Arlington, VA. Abstract and Presentation (ES207) (PubID115360).

18. Kass, M., Janke, C.J., Connatser, R.M., Lewis, S.A., Keiser, J.R.; Compatibility of Fast-Pyrolysis Bio-oil with Infrastructure Plastic Materials. TCBiomass 2017 (Gas Technology Institute), Sept. 19-21, 2017, Chicago, IL. Presentation/Poster (PubID102207).

19. Tsouris, C.; Ladshaw, A.P.; Wiechert, A.I.; Yiacoumi, S.; Saito, T.; Liao, W.P.; Hong, E.; Das, S.; Mayes, R.T.; Janke, C.J.; Gill, G.; Kuo, L.J.; Influence of Environmental Variables on Uranium Adsorption; Fuel Resources (Seawater Uranium Recovery Program PI Meeting; MSL-PNNL, Sequim, WA; August 2-3, 2017 (PubID).

20. Pan, H.B.; Wai, C.M.; Kuo, L.J.; Wood, J.; Strivens, J.; Schlafer, N.; Janke, C.J.; Gill, G.A.; Optimizing Uranium Adsorption Capacity of LCW Polymer Fibers in Recirculating Seawater Systems; Fuel Resources (Seawater Uranium Recovery Program PI Meeting; MSL-PNNL, Sequim, WA; August 2-3, 2017 (PubID 101903).

21. Janke, C.J.; Das, S.; Mayes, R.T.; Dai, S.; Gill, G.; Kuo, L-J.; Wood, J.; Strivens, J.; Recent Developments on ORNL’s RIGP Adsorbents; Fuel Resources (Seawater Uranium Recovery Program PI Meeting; MSL-PNNL, Sequim, WA; August 2-3, 2017 (PubID 101908).

22. Wood, D.; Du, Z.; Janke, C.J.; Li, J.; Daniel, C.; Eberle, C; Towards Solventless Processing of Thick Electron-Beam (EB) Cured Lithium-Ion Battery Cathodes; 2017 DOE Vehicile Technologies Office and Hydrogen and Fuel Cells Program Annual Merit Review; June 5-9, 2017, Washington, D.C. Presentation (ES207) (PubID75477).

23. Janke, C.J.; Das, S.; Mayes, R.T.; Dai, S.; Gill, G.; Kuo, L-J.; Wood, J.; Strivens, J.; Adsorbents Prepared by Radiation-Induced Graft Polymerization; US-Japan Bilateral Meeting: National Institutes for Quantum and Radiological Science and Technology, Takasaki Advanced Radiation Research Institute, Takasaki, Japan; February 16, 2017; Presentation (PubID72960).

24. Kuo, L-J.; Pan, H.B.; Wai, C.; Gill, G.; Janke, C.J.; Strivens, J.; Wood, J.; Schlafer, N.; Cade, S.; Reusability of Amidoxime-based Polymeric Adsorbents for Extraction of Uranium from Natural Seawater; Fuel Resources (Seawater Uranium Recovery) PI Meeting; Univ. of South Florida, Tampa, FL; Jan. 13, 2017; Presentation (PubID72792).

25. Janke, C.J.; Das, S.; Mayes, R.T.; Dai, S.; Gill, G.; Kuo, L-J.; Wood, J.; Strivens, J.; Novel Radiation-Induced Graft Polymerization Adsorbents; Fuel Resources (Seawater Uranium Recovery) PI Meeting; Univ. of South Florida, Tampa, FL; Jan. 12, 2017; Presentation (PubID72783).

26. Du, Z.; Janke, C.J.; Wood, D.; Daniel, C.; Li, J.; Electron beam curing of acrylated polyurethanes and their application in Li-ion battery; The 18th International Coating Science and Technology Symposium, Pittsburgh, PA, Sep. 18-21, 2016; Abstract/Presentation (PubID61809).

27. Kass, M., Janke, C.J., Connatser, R.M., Lewis, S.A., Keiser, J.R.; Compatibility of Fast-Pyrolysis Bio-oil with Infrastructure Elastomers. TCS 2016 Symposium on Thermal and Catalytic Sciences for Biofuels and Biobased Products, Nov. 1, 2016, Chapel Hill, NC. Poster (PubID 71289).

28. Mayes, R.T.; Das, S.; Janke, C.J.; Dai, S.; Cotton-Based Adsorbents for Uranium Extraction. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Abstract/Presentation.

29. Das, S.; Mayes, R.T.; Janke, C.J.; Dai, S.; Pretreatment of Amidoxime prior to Exposure in Seawater for Uranium Extraction. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Poster.

30. Park, J.; Gill, G.; Kuo, L.J.; Strivens, J.E.; Jeters, R.T.; Avila, A.; Wood, J.; Schlafer, N.; Janke, C.J.; Bonheyo, G.; Environmental Impact on Seawater Uranium Production. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Abstract/Presentation (PubID 69155).

31. Kuo, L.J.; Pan, H.B.; Wai, C.; Gill, G.; Janke, C.J.; Strivens, J.E.; Wood, J.; Schlafer, N.; Cade, S; Assessing Reusability of Amidoxime-based Polymeric Adsorbents for Extraction of Uranium from Seawater. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Abstract/Presentation (PubID 69153).

32. Das, S.; Mayes, R.T.; Dai, S.; Janke, C.J.; Gill, G.; Kuo, L.J.; Wood, J.; Strivens, J.E.; Uranium Adsorbents by Radiation-Induced Graft Polymerization. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Abstract/Presentation (PubID 68903).

33. Pan, H.B.; Kuo, L.J.; Wai, C.; Gill, G.; Janke, C.J.; Joshi, R.; Miyamoto, N.; Strivens, J.E.; Wood, J.; Schlafer, N.; Cade, S.; Spectroscopic Characterization of Amidoxime-Based Polymer Adsorbents for Improving Uranium Adsorption from Seawater. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Abstract/Presentation (PubID 68900).

34. Ladshaw, A.; Wiechert, A.I.; Yiacoumi, S.Z.; Kuo, L.J.; Wood, J.; Gill, G.; Das, S.; Mayes, R.T.; Janke, C.J.; Saito, T.; Tsouris, C.; Adsorption Experiments and Modeling for the Recovery of Uranium from Seawater. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Poster (PubID 68846).

35. Tsouris, C.; Das, S.; Ladshaw, A.; Wiechert, A.I.; Yiacoumi, S.Z.; Mayes, R.T.; Janke, C.J.; Kuo, L.J.; Strivens, J.E.; Wood, J.; Schlafer, N.; Gill, G.; Experiments and Modeling of the Influence of Environmental Factors on Uranium Adsorption. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Abstract/Presentation (PubID 68844).

36. Brown, S.; Hong, E.K.; Kuo, L.J.; Gill, G.; Tsouris, C.; Mayes, R.T.; Janke, C.J.; Dai, S.; Saito, T.; Development of fiber adsorbents using controlled radical polymerization for recovery of uranium from seawater. International Conference on Seawater Uranium Recovery, July 19-22, 2016, College Park, MD. Abstract/Presentation (PubID 68662).

37. Wood, D.L.; Du, Z.; Janke, C.J.; Li, J.; Daniel, C.; Eberle, C.; Towards Solventless Processing of Thick Electron-Beam (EB) Cured LIB Cathodes. Presentation given by Oak Ridge National Laboratory (ORNL) at the 2016 DOE Vehicle Technologies Office and Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting about Batteries, June 8, 2016, Washington, DC. Abstract/Presentation (PubID 68372, 69895).

38. Ladshaw, A., Wiechert, A., Yiacoumi, S., Kuo, L.J., Wood, J., Gill, G., Das, S., Mayes, R.T., Janke, C., Saito, T., Tsouris, C., Adsorbents for Uranium Recovery from Seawater. The 90th ACS Colloid & Surface Science Symposium, Harvard Univ., Boston, MA, June 5-8, 2016. Poster/Presentation. (PubID 67836).

39. Du, Z., Janke, C.J., Wood, D.L., Daniel, C., Li, J., Electron beam curing of acrylated polyurethanes and their application in Li-ion battery. The 18th International Coating Science and Technology Symposium, Pittsburgh, PA, September 18-21, 2016. Abstract/Presentation. (PubID 61809).

40. Janke, C.J.; Das, S; Mayes, R.T.; Dai, S.; Materials Grafting Developments. Fuel Cycle Research and Development – Seawater Uranium Recovery Program Meeting - DOE-NE Fuel Resources Program Meeting - January 14-15, 2016 - Oak Ridge National Laboratory. Presentation (PubID 61068).

41. Das, S.; Mayes, R.T.; Dai, S.; Janke, C.J.; Advanced Adsorbent Materials. Fuel Cycle Research and Development – Seawater Uranium Recovery Program Meeting - DOE-NE Fuel Resources Program Meeting - January 14-15, 2016 - Oak Ridge National Laboratory. Presentation (PubID 69303).

42. Tsouris, C., Liao, W.P., Das, S., Mayes, R.T., Janke, C.J., Saito, T., Abney, C.W., Bryantsev, V., Dai, S., Kuo, L.J., Gill, G., Flicker-Byers, M., Schneider, E., Ladshaw, A., Wiechert, A.I., Yiacoumi, S., Adsorbents for Uranium Uptake from Seawater: Toward Sustainable Nuclear Energy. Pacifichem 2015, Honolulu, Hawaii, December 15-20, 2015. Abstract/Presentation. (PubID 60433).

43. Keiser, J.R., Brady, M.P., Lewis, S.A., Connatser, R.M., Kass, M.D., Leonard, D.N., Janke, C.J., Materials Issues In Thermochemical Production, Processing and Utilization Of Bio-Oil. Corrosion 2016 Conference and Expo, Vancouver, Canada, March 6-10, 2016. Presentation/Abstract/Paper. (PubID 60362).

44. Mayes, R., Janke C., Das, S., Dai, S., “Radiation-induced graft polymerization for uranium sorbent production.” 2015 Joint Working Group, Chinese Academy of Sciences-DOE Nuclear Energy Sciences & Technologies (NEST) Cooperation, Shanghai, China, December 10-11, 2015. Presentation (PubID 60327).

45. Tsouris, C., Liao, W.P., Das, S., Zhang, C., Mayes, R.T., Janke, C.J., Saito, T., Dai, S., Ladshaw, A.P., Wiechert, A.I., Yiacoumi, S., “Uranium adsorption from seawater by amidoxime-functionalized polyethylene fibers: experiments and modeling.” Annual AlChE Meeting, Salt Lake City, Utah, November 11, 2015. Abstract/Presentation (PubID 60005).

46. Kass, M., Janke, C., Connatser, R., Lewis, S. et al., "Compatibility Assessment of Elastomeric Infrastructure Materials with Neat Diesel and a Diesel Blend Containing 20 Percent Fast Pyrolysis Bio-oil.” SAE 2015 World Congress & Exposition, Detroit, MI, April 22, 2015.

47. Kass, M., Janke, C., Connatser, R., Lewis, S. et al., "Compatibility Assessment of Plastic Infrastructure Materials with Off-Highway Diesel and a Diesel Blend Containing 20 Percent Fast Pyrolysis Bio-Oil.” SAE 2015 World Congress & Exposition, Detroit, MI, April 22, 2015.

48. Kass, M., Janke, C., Theiss, T., Baustian, J. et al., "Compatibility Assessment of Plastic Infrastructure Materials with Test Fuels Representing E10 and iBu16.” SAE 2015 World Congress & Exposition, Detroit, MI, April 15, 2015.

49. Kuo, L.J.; Gill, G.; Wood, J.; Strivens, J.E.; Cobb, M.E.; Janke, C.J.; Characterization and testing of adsorbent materials to extract uranium from natural seawater. 249th ACS National Meeting 2015, Denver, CO, March 23, 2015.

50. Das, S.; Liao, W.P.; Zhang, C.; Mayes, R.T.; Janke, C.J.; Dai, S.; Tsouris, C.; Adsorbent Pretreatment and Batch Kinetic Experiments for Uranium Adsorption Testing and Modeling. 249th ACS National Meeting 2015, Denver, CO, March 23, 2015.

51. Das, S.; Mayes, R.T.; Dai, S.; Janke, C.J.; Performance Enhancing Amidoxime for Uranium Recovery from Seawater. 249th ACS National Meeting 2015, Denver, CO, March 23, 2015.

52. Janke, C.J.; Das, S.; Mayes, R.T.; Dai, S.; Preparation of Uranium Adsorbents by Radiation-Induced Graft Polymerization. 249th ACS National Meeting 2015, Denver, CO, March 23, 2015.

53. Brown, S.; Chatterjee, S.; Johnson, J.C.; Kuo, L.-J.; Gill, G.A.; Tsouris, C.; Mayes, R.T.; Janke, C.J.; Dai, S.; Saito, T. “Advanced fiber adsorbents for recovery of uranium from seawater prepared via controlled radical polymerization.” 249th ACS National Meeting and Exposition. March 22, 2015, Denver, CO.

54. Tsouris, C.; Das, S.; Kim, J.; Mayes, R.T.; Janke, C.J.; Saito, T.; Dai, S.; Adsorption of Uranium from Seawater. 2014 Annual AIChE Meeting, Atlanta, GA, Nov. 20, 2014.

55. Tsouris, C.; Das, S.; Kim, J.; Mayes, R.T.; Janke, C.J.; Saito, T.; Dai, S.; Production of Uranium from Seawater. 18th Symposium on Separation Science and Technology for Energy Applications, Oak Ridge, TN, Oct. 30, 2014.

56. Britt, P.F., Dai, S., Hay, B., Janke, C.J., Mayes, R.T., Saito, T., Tsouris, C., Rao, L.; Development of Polymeric Adsorbents for Recovery of Uranium from Seawater. The International Symposium on Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM 2014). Vienna, Austria, June 23-27, 2014.

57. Kass, M.D.; Janke, C.J.; Theiss, T.; Pawel, S.; Baustian, J.; Wolf, L.; Koch, W.; Compatibility Assessment of Plastic Infrastructure Materials to Test Fuels Representing Gasoline Blends Containing Ethanol and Isobutanol. SAE 2014 World Congress & Exhibition. Detroit, MI, April 7-9, 2014.

58. Kass, M.D.; Janke, C.J.; Theiss, T.; Pawel, S.; Baustian, J.; Wolf, L.; Koch, W.; Compatibility Assessment of Elastomer Materials to Test Fuels Representing Gasoline Blends Containing Ethanol and Isobutanol. SAE 2014 World Congress & Exhibition. Detroit, MI, April 7-9, 2014.

59. Kass, M.D.; Theis, T.J.; Thomson, J.K.; Pawel, S.J.; Janke, C.J.; Compatibility Assessment of Isobutanol-Gasoline Fuel Blends with Fueling Infrastructure Materials. 24th National Tanks Conference & Expo. Denver, CO, Sept. 16-18, 2013.

60. Oyola, Y.; Janke, C. J.; Dai, S.; Synthesis of Amidoxime-Based Adsorbents with High Adsorption Capacity for Uranium and Other Metal Ions. ACS 2013 National Meeting, New Orleans, LA, April 7-11, 2013.

61. Felker, L.K.; Dai, S.; Janke, C.J.; Tsouris, C.; Development and Testing of Adsorbent Materials for Recovery of Uranium from Seawater. 37th Actinide Separations Conference, Spokane, Washington, June 24-27, 2013.

62. Tsouris, C.; Kim, J.; Oyola, Y.; Mayes, R.; Hexel, C.; Sostra, G.; Janke, C.; Dai, S.; Gill, G.; Kuo, L.J.; Choe, K.Y.; Pourmand, A.; D'Alesandro, E.; Buesseler, K.; Pike, S.; Uptake of Uranium from Seawater by Amidoxime-Based Polymeric Adsorbent: Marine Testing. Proceedings of the Global 2013 International Nuclear Fuel Cycle Conference, Salt Lake City, UT, Sept. 29-Oct. 3, 2013.

63. Felker, L.K.; Dai, S.; Hay, B.P.; Janke, C.J.; Mayes, R.T.; Sun, X.; Tsouris, C.; Adsorbent Materials Development and Testing for The Extraction of Uranium from Seawater. American Nuclear Society - Global 2013, Salt Lake City, Utah, September 29 – October 3, 2013.

64. Oyola, Y; Janke, C.J.; Dai, S.; Synthesis of amidoxime-based adsorbents with high adsorption capacity for uranium and other metal ions. Abstracts of Papers of the American Chemical Society 2013, 245.

65. Brouner, J., Janke, C.J.; Heavy Metal Fishing, New Technology at ORNL May Secure Nuclear Energy for Hundreds of Years, Oak Ridge National Laboratory REVIEW, Vol. 46, No. 1, 16-17, 2013, Disruptive Materials.

66. Mayes, R.T.; Gorka, J.; Brown, S.; Janke, C.J.; et. al.; Functionalized carbon materials as uranium adsorbents. Abstracts of Papers of the American Chemical Society 2012, 244.

67. Kim, J.; Tsouris, C.; Oyola, Y.; Janke, C.J.; et. al.; Influence of temperature on uranium adsorption from seawater. Abstracts of Papers of the American Chemical Society 2012, 244.

68. Saito, T.; Oyola, Y.; Janke, C.J.; Investigation of polymer structure and properties of amidoxime-functionalized hydrophilic random copolymers on performance of uranium recovery from seawater. Abstracts of Papers of the American Chemical Society 2012, 244.

69. Tsouris, C.; Kim, J.; Mayes, R.T.; Janke C.J.; et. al.; Marine testing of uranium adsorption from seawater. Abstracts of Papers of the American Chemical Society 2012, 244.

70. Oyola, Y.; Janke, C.J.; Dai, S.; Synthesis, development and testing of uranium adsorbent materials. Abstracts of Papers of the American Chemical Society 2012, 244.

71. Gill, G.; Kuo, L.J.; Choe, K.Y.; Janke, C.J.; et. al.; Testing adsorbents to extract uranium from ambient seawater. Abstracts of Papers of the American Chemical Society 2012, 244.

72. Kass, M.D.; Theiss, T.J.; Pawel, S.J.; Janke, C.J.; Compatibility Summary of Fueling Infrastructure Materials with Aggressive Ethanol Blended Test Fuels. 23rd National Tanks Conference. St. Louis, MO. March 18-21, 2012.

73. Oyola, Y.; Janke, C.J.; Dai, S.; Synthesis, Development and Testing of Uranium Adsorbent Materials. ACS Fall 2012 National Meeting, Philadelphia, PA, August 19, 2012.

74. Saito, T.; Oyola, Y.; Janke, C.J.; Investigation of Polymer Structure and Properties of Amidoxime-Functionalized Hydrophilic Random Copolymers on Performance of Uranium Recovery from Seawater. ACS Fall 2012 National Meeting, Philadelphia, PA, August 19, 2012.

75. Tsouris, C.; Kim, J.; Mayes, R.T.; Oyola, Y.; Janke, C.J.; Dai, S.; Kuo, L.; Gill, G.; Pourmand, A.; Marine Testing of Uranium Adsorption from Seawater. ACS Fall 2012 National Meeting, Philadelphia, PA, August 19, 2012.

76. Kim, J.; Tsouris, C.; Mayes, R.T.; Oyola, Y.; Janke, C.J.; Influence of Temperature on Uranium Adsorption from Seawater. ACS Fall 2012 National Meeting, Philadelphia, PA, August 19, 2012.

77. Kim, J.; Oyola, Y.; Mayes, R.T.; Hexel, C.R.; Janke, C.J.; Dai, S.; Tsouris, C.; Testing of Amidoxime-Based Adsorbent for the Recovery of Uranium from Seawater. 2012 AIChe Annual Meeting. Pittsburgh, PA. Oct. 28-Nov 2, 2012.

78. Kass M. D.; Janke C., et al; Compatibility Study for Plastic, Elastomeric, and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Ethanol-blended Gasoline. ORNL/TM-2012/88. Oak Ridge, TN: Oak Ridge National Laboratory. April 2012.

79. Kass, M.D.; Theiss, T.; Janke, C.J.; Pawel, S.J.; Material Compatibility of Fueling Infrastructure Materials in Ethanol Blended Fuels. ASTM Committee D02.14 Stability and Cleanliness of Liquid Fuels. New Orleans, LA. Dec. 6-8, 2011.

80. Tsouris, C.; Oyola, Y.; Janke, C.J.; Siddiqui, S.A.; Mayes, R.T.; Dai, S.; Uptake of Uranium from Seawater: Development and Testing of Sorbents. 17th Symposium on Separations Science and Technology for Energy Applications. Gatlinburg, TN. Oct. 23-27, 2011.

81. Kass, M.D.; Theiss, T.J.; Pawel, S.J.; Janke, C.J.; Chapin, T.J.; Fabian, T.; Yang, E.; Boyce, K.; Elastomer Compatibility to Gasoline Containing Intermediate Levels of Ethanol. 21st International Conference on Fluid Sealing, Poiters, France, October 4, 2011.

82. Kass, M.D.; Theiss, T.J.; Janke, C.J.; Pawel, S.J.; Lewis, S.A.; Fuel Dispenser Materials and Intermediated Ethanol Blends Compatibility. Hose Manufacture’s Conference. Cleveland, OH. Aug. 22-24, 2011.

83. Oyola, Y.; Brown, S; Saito, T; Janke, C.J.; Dai, S.; Synthesis, Development and Testing of Uranium Adsorbent Materials. 43rd IUPAC World Chemistry Congress, San Juan, Puerto Rico, July 30-August 5, 2011.

84. Theiss, T.J.; Yang, E.; Kass, M.D.; Pawel, S.J.; Lewis, S.A.; Moriarty, K.; Janke, C.J.; Fabian, T.; Clark, W.; Chapin, T.J.; Fuel Dispenser Materials and E15 Compatibility. 22nd National Tanks Conference & Expo. Boston, MA. Sept. 20-21, 2010.

85. Janke, C.J.; Norris, R.E.; Long-Living Polymer Electrolytes. 2010 DOE Vehicle Technologies Program Review, Washington, DC, June 8, 2010.

86. Kass, M.D.; Theiss, T.J.; Pawel, S.J.; Janke, C.J.; Compatibility Assessment of Fuel Dispenser Metals and Elastomers in an Aggressive E20 Fuel. Material Challenges in Alternative & Renewable Energy (American Ceramic Society). Cocoa Beach, FL. Feb. 22-24, 2010.

87. Janke, C.J.; Long-Lived Polymer Electrolytes. DOE Project Review, Oak Ridge, TN, February 9, 2010.

88. Mansur, L.K.; Bhattacharya, R.; Blau, P.J.; Clemons, A.; Eberle, C.C.; Evans, H.B.; Janke, C.J.; Jolly, B.C.; Lee, E.H.; Leonard, K.J.; Trejo, R.M.; Rivard, J.D.K.; Super Hard Surfaced Polymers. SAMPE 2010, Seattle, WA - Spring Conference, May 17-20, 2010.

89. West, B.H.; Janke, C.J.; et. al.; Displacing Petroleum Through Efficient Use of Biofuels. Energy and Engineering Science Directorate Advisory Panel Meeting, Oak Ridge, TN, October 6, 2009.

90. Pawel, S.J.; Janke, C.J.; Theiss, T.J.; Kass, M.D.; ORNL Dispenser Compatibility Study Status. Program Review, Washington, DC, September 15, 2009.

91. Ng, S.; Meilunas, R.; Janke, C.J.; Eberle,C.; Fisher, W.; Fisher, J.; Laser Induced Fluorescence Based Nondestructive Evaluation of Heat Damaged Composite Aircraft. National Space & Missiles Materials Symposium, Henderson, NV on June 22-25, 2009.

92. Fisher, W.; Janke, C.J.; Fisher, J.; Final Report-Phase I Navy SBIR on Non-Contact Cure State Measurement of Adhesives, Coatings and Sealants Using Laser-Induced Fluorescence. Naval Air Warfare Center, Patuxent River, MD, April 28, 2009.

93. Janke, C.J.; et. al.; Fuel Dispenser Compatibility Experiments, Current Status and Results Summary. Department of Energy, Washington, DC, April 8, 2009.

94. Janke, C.J.; et. al; Accelerated Compatibility Experiments of Dispenser Materials, Department of Energy, Washington, DC, December 17, 2008.

95. Meilunas, R.; Ng, S.; Janke, C.J.; Fisher, W.; Laser-Induced Fluorescence Based Non- Destructive Evaluation of Heat Damaged Aircraft Composites. 53rd Intl. SAMPE Symposium and Exhibition, Long Beach, CA May 18-22, 2008.

96. Ladd, P; Janke, C.J.; CCL and DTL Isolation Valve Failures. OLAV II - 2nd Workshop on the Operation of Large Vacuum Systems. Daresbury Laboratory, Warrington UK, March 10-12, 2008.

97. Leonard, K.J.; Janke, C.J.; Busby, J.T.; Shin, E.E.; Bowman, C.L.; Radiation Sensitivity, Dose and Temperature Limitations of Polymeric Materials for Application in a Fission Surface Power Convertor. Space Technology and Applications International Forum (STAIF-2008), 25th Symposium on Space Nuclear Power and Propulsion, Feb. 14, 2008, Albuquerque, NM.

98. Janke, C.J.; Eberle, C.C.; et. al.; Rapidly Processible Automotive Adhesives and Resins. State Partnership Project Meeting, Oak Ridge, TN, September 21, 2006.

99. Eberle, C.C.; Janke, C.J.; Wang, C.S.; Electron Beam Curing Demonstration with Automobile Structures. SPE Automotive Composites Conference, Sept. 14-15, 2004, Troy, MI.

100. Janke, C.J.; Status Report - EB Interface CRADA. AFOSR E-Beam Panel Discussion, 47thInternational SAMPE Symposium 2002, May 12-16, 2002, Long Beach, CA, 47, (2002).

101.

102. Frame, B.J.; Wrenn, G.E.; Janke, C.J.; Results of Electron Beam Prepreg Debulking Study. 47th International SAMPE Symposium 2002, May 12-16, 2002, Long Beach, CA, 47, (2002).

103. Foedinger, R.; Schneider, T.; Grande, R.; Malghan, S.; Walton, T.; Norris, R.; Frame, B.; Janke, C.J.; Evans, R.; Development of Electron Beam Curable Composite Motor Cases. 47th International SAMPE Symposium 2002, May 12-16, 2002, Long Beach, CA, 47, (2002).

104. Janke, C.J.; Lomax, R.D.; Robitaille, S.; Duggan, S.; Serranzana, R.C.; Lopata, V.J.; Improved Epoxy Resins Cured by Electron Beam Irradiation. 46th International SAMPE Symposium 2001, May 6-10, 2001, Long Beach, CA, 46, 2048 (2001).

105. Bechel, V.; Janke, C.J.; Wilenski, M.; Tandon, G.P.; Constituent Level Examination of an E-Beam Cured Graphite/Epoxy Composite. 46th International SAMPE Symposium 2001, May 6-10, 2001, Long Beach, CA, 46, 2115, (2001).

106. Janke, C.J.; Results on Improving the Toughness of E-Beam Curable Cationic Epoxy Resins. 2000 Electron Beam Curing Workshop, June 14-15, 2000, Oak Ridge, TN.

107. Janke, C.J.; Radiation Curable Polymers and Composites. 2000 Electron Beam Curing Workshop, June 14-15, 2000, Oak Ridge, TN.

108. Norris, R.E.; Janke, C.J.; Eberle, C.; Wrenn, G.E.; Electron Beam Curing of Composites Overview. Proc. 2000 Future Car Congress, Arlington, VA, April 2 – 6, 2000, SAE paper 2000-01-1525.

109. Derriso, M.M.; Coghlan, S.; Janke, C.J.; Liquid Hydrogen Permeability Testing on Electron Beam Processed Gr/Ep Panels. Proc. National Space & Missile Materials Symposium, San Diego, CA, Feb 28 – Mar 2, 2000.

110. Foedinger, R.; Rea, D.; Grande, R.; Davis, C.; Norris, R.; Janke, C.J.; Walton, T.; Vandiver, T.L.; Electron Beam Curing of Filament Wound Composite Pressure Vessels. 44th International SAMPE Symposium, Long Beach, CA , 44, 248 (1999).

111. Janke, C.J.; Lopata, V.J.; Analysis of Identical Epoxy Resin Formulations Cured Thermally or by Electron Beam. 44th International SAMPE Symposium, Long Beach, CA, 44, 602 (1999).

112. Janke, C.J.; Yarborough, K.; Drzal, L.T.; Fiber-Matrix Interface Studies on Electron Beam Cured Composites. 44th International SAMPE Symposium, Long Beach, CA, 44, 647 (1999).

113. Lopata, V.J.; Saunders, C.B.; Singh, A.; Janke, C.J.; Wrenn, G.E.; Havens, S.J.; Electron Beam Curable Epoxy Resins for The Manufacture of High-Performance Composites. Radiation Physics and Chemistry, 56 (4), 405-415, Oct. 1999.

114. Janke, C.J.; A Cooperative R&D Program on Interfacial Properties of Electron Beam Cured Composites. 3rd Electron Beam Curing of Composites Workshop, April 20, 1999, Oak Ridge, TN.

115. Farmer, J.D.; Janke, C.J.; Lopata, V.J.; The Electron Beam Cure of Epoxy Paste Adhesives. 43rd International SAMPE Symposium, Anaheim, CA, 43, 1639 (1998).

116. Farmer, J.D.; Janke, C.J.; Lopata, V.J.; Electron Beam Cure of Composite T-38 Windshield Frame/Arch. 43rd International SAMPE Symposium, Anaheim, CA, 43, 1647 (1998).

117. Roylance, M.E.; Janke, C.J.; Tuss, J.M.; Affordable Composite Structures Via Electron Beam Curing. 43rd International SAMPE Symposium, Anaheim, CA 43, 1660, (1998).

118. Janke, C.J.; Norris, R.E.; Yarborough, K.; Havens, S.J.; Lopata, V.J.; Critical Parameters for Electron Beam Curing of Cationic Epoxies and Property Comparison of Electron Beam Cured Cationic Epoxies Versus Thermal Cured Resins and Composites. 42nd International SAMPE Symposium, Anaheim, CA, 42, 477 (1997).

119. Janke, C.J.; 2nd Annual Electron Beam Curing of Composites Workshop, September 10-11, 1997, Oak Ridge, Tennessee.

120. Janke, C.J.; Properties of Electron Beam Cured vs. Autoclave Cured Composites and Adhesives. Electron Beam Curing of Composites Workshop, Oak Ridge, TN, Sept.10-11, 1997.

121. Farmer, J.D.; Janke, C.J.; Lopata, V.J.; The Electron Beam Cure of Fiberglass/Epoxy Prepregs. 29th International SAMPE Technical Conference, Orlando, FL, 1997.

122. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Meador, M.A.; Electron Beam Cured Epoxy Resin Composites for High Temperature Applications. Proc. PPM and Other Propulsion R&T Conference, NASA Conference Publication 10193, Cleveland, OH, 1997.

123. Powell, G.L.; Janke, C.J.; Barber, T.E.; Nondestructive Inspection of Heat Damage to Graphite-Epoxy Laminates Using Diffuse Reflectance Fourier Transform Infrared Spectroscopy (DRIFTS). 29th International SAMPE Technical Conference, Orlando, Florida, October 29-November 1, 1997.

124. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Meador, M.A.; Electron Beam Cured Epoxy Resin Composites for High Temperature Applications. High Temple Workshop XVII, Naval Postgraduate School, Monterey, CA, February 10-13, 1997.

125. Janke, C.J.; Electron Beam Curing of Composites. Gordon Research Conference on Composites, Ventura, CA, Jan.5-10, 1997.

126. Lopata, V.J.; Chung, M.; Janke, C.J.; Havens, S.J.; Electron Beam Curing of Epoxy Resins: Initiator and Concentration Effects On Curing Dose And Rheological Properties. 28th International SAMPE Technical Conference, Seattle, WA, 28, 901 (1996).

127. Janke, C.J.; Electron Beam Curable Catonic Epoxy Resin Systems and Composites. Electron Beam Curing of Composites Workshop, Oak Ridge, TN, Sept.18-19, 1996.

128. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Toughened Epoxy Resins Cured By Electron Beam Radiation. 28th International SAMPE Technical Conference, Seattle, WA, 28, 877 (1996).

129. Janke, C.J.; Dorsey, G.F.; Havens, S.J.; Lopata, V.J.; Electron Beam Curing of Epoxy Resins by Cationic Polymerization. 41st International SAMPE Symposium, Anaheim, CA, 41, 196 (1996).

130. Janke, C.J., et al.; Nondestructive Inspection Techniques to Assess Composite Heat Damage. Symposium on Composite Repair of Aircraft Structures, Vancouver, British Columbia, Aug.9-11, 1995.

131. Janke, C.J.; Electron Beam Curing of Polymer Matrix Composites. Engineering Technology Division Information Meeting, ORNL, Oak Ridge, TN, May 20, 1994.

132. Fisher, W.G., Janke, C.J., Wachter, E.A., and Powell, G.L.; Fluorescence Characterization of Thermal Damage in Fiber-Reinforced Polymer-Matrix Composites. Pittcon '94, Chicago, Feb.27-Mar.4, 1994.

133. Janke, C.J.; Powell, G.L.; Smyrl, N.R.; Wachter, E.A.; Fisher, W.G.; Philpot H.E.; Lucania, J.; Milosevic, M.; Auth, G.; Composite Heat Damage Assessment. Proc. Conf. on Characterization and NDE of Heat Damage in Graphite Epoxy Composites, Orlando, FL, Apr.27-29,1993, Nondestructive Testing Information Analysis Center, Austin, TX, 97, 1993.

Mentorship Experience

1. 1994-1998; Dr. Steven Havens – Post-Doctoral Research Associate – Electron beam curing of composites and adhesives

2. 1993-1995; Dr. Walter Fisher - Post-Doctoral Research Associate – Composite heat damage detection and quantification

3. 2010-2013; Dr. Yatsandra Oyola - Post-Doctoral Research Associate – Uranium extraction from seawater

4. 2010-2012; Dr. Tomonori Saito - Post-Doctoral Research Associate – Uranium extraction from seawater

5. 2013-2016; Dr. Sadananda Das - Post-Doctoral Research Associate – Uranium extraction from seawater

6. 2015-2016; Dr. Zhijia Du - Post-Doctoral Research Associate – Ultraviolet and Electron Beam Processing of Lithium-Ion Battery Electrodes

7. 2017- Present; Holly Humphrey – UTK Chemistry Student – Global Security Directorate Projects

Professional Memberships

1. Member of Society for the Advancement of Materials and Process Engineering (SAMPE)

2. Member of American Chemical Society (ACS)

3. Member of Technical Association of the Pulp and Paper Industry (TAPPI)

News:

Information Links on ORNL’s HiCap Adsorbents are included below:

1. The Register – Aug. 22 – Lewis Page (United Kingdom)

New nuclear fuel source would power human race until 5000AD – Fission not just safe and affordable: sustainable too



2. C&EN (Chemical & Engineering News) - Sept. 3, Vol. 90, No. 36, p. 60 - Mitch Jacoby - 847-679-1156 (see Sept. 5 email)

Extracting Uranium From Seawater



3. International Mining – Aug. 28

ORNL technology moves scientists closer to extracting uranium from seawater



4. World Nuclear News – Aug. 23

The sea is the key to uranium bounty



5. TG Daily – Aug. 22 – Emma Woolacott

Nuclear power could come from the oceans



6. Examiner – Aug. 22 – David Herron – greentransportation@

Extracting uranium from oceans offers a mixed bag of possibilities



7. The Engineer – Aug. 22 – United Kingdom

Material could economically extract uranium from water



8. ORNL Press Release – Aug. 21 – Ron Walli – 576-0226

ORNL Technology moves scientists closer to extracting uranium from seawater



9. Inside Energy – Aug. 27 – Derek Sands

DOE cites progress in decades-old bid to extract uranium from world’s oceans

10. – Aug. 26 – Frank Munger

Mining nuclear fuel from the ocean may be approaching an economic reality



11. Latinospost – Aug. 22 – Keerthi Chandrashekar

There’s nuclear power in our ocean; Enough for 6,500 years



12. R&D Magazine – Aug. 14 –

Surface area key to metal adsorption



13. Holmanronny 1988’s blog – Aug. 22

Moving closer to extracting uranium from seawater

14. ANI News – Aug. 24

Extracting uranium from seawater comes closer to reality



15. India Vision – Aug. 22 – India

Extracting uranium from seawater comes closer to reality



16. Open Your Eyes News (The big picture on world news) – Aug.

Extracting uranium from seawater



17. Environmental Resource Center – Aug. 27

Technology moves scientists closer to extracting uranium from seawater



18. Sify news – Aug. 22

Extracting uranium from seawater comes closer to reality



19. ARPS – Australian Radiation Protection Society – Aug. 27

ORNL technology moves scientists closer to extracting uranium from seawater



20. – Aug. 22

Extracting uranium from seawater comes closer to reality



21. The TerraMar Project – The Daily Catch – Aug. 22

Nuclear power from seawater



22. Empower Network – Aug. 22 – Lanalane

Extracting uranium from oceans offers a mixed bag of possibilities



23. Appropriated Motility – Aug. 23 -

Moving closer to extracting uranium from seawater



24. Muzzled-Hydrate – Aug. 23

Moving closer to extracting uranium from seawater



25. The Next Big Future – Aug. 24 – Brian Wang

Abstracts from extracting uranium from seawater conference (ACS meeting in Philadelphia, Aug. 2012)



26. Tumblr (the nuclear blog) – Aug. 21

Fueling nuclear power with seawater



27. Laboratory Equipment – Aug. 22

Material can extract uranium from seawater



28. Science Newsline – Aug. 21

ORNL technology moves scientists closer to extracting uranium from seawater



29. Hindustan Times – Aug. 22

Extracting uranium from seawater may be possible



30. NewScientist – Aug. 22 – Will Ferguson

Record haul of uranium harvested from seawater



31. Free Republic – Aug. 22 – Ernest at the beach (Fresno, CA)

New nuclear fuel would power human race until 5000AD



32. India Talkies – Aug. 22 – Tanushree

Extracting uranium from seawater comes closer to reality



33. Wikipedia – Aug. 24

“Uranium Depletion”



34. TCE Today (The Chemical Engineer) – Aug. 24 – Helen Tunnicliffe

Fishing for uranium – New ways to tap resources to last 6,500 years



35. – Aug. 21

Extracting uranium from seawater



36. Gizmag – Aug. 22 – David Szondy (Monroe, Washington)

Oak Ridge develops improved way of extracting uranium from seawater



37. Oak Ridge Today – Aug. 26

ORNL technology moves scientists closer to extracting uranium from seawater



38. Wikipedia – Aug. 24

“Uranium Mining”



39. Teknoids

New nuclear fuel source would power human race until 5000AD



40. Darwin Central – Aug. 21

Moving closer to extracting uranium from seawater



41. (Investor’s Business Daily) – Aug. 23

Sponge soaks up uranium



42. Science & Technology News – Aug. 26 – Techadmin

Material could economically extract uranium from water



43. Nuclear Power Daily – Aug. 24

ORNL technology moves scientists closer to extracting uranium from seawater



44. NEI Nuclear Notes – Aug. 24 – Mark Flanagan

Uranium of the sea – and how to get it – and why



45. Newswise – Aug. 21 – Charlottesville, VA

ORNL technology moves scientists closer to extracting uranium from seawater



46. – Aug. 22

Extracting uranium from seawater? ORNL technology moves scientists closer



47. The Christian Science Monitor – Aug. 22 – Francie Diep (Innovation News Daily)

Scientists could soon begin extracting nuclear fuel from seawater



48. Journal- – Aug. 22 – Pete Sheehan

Energy from seawater



49. Wikipedia – Aug. 24

Uranium



50. Wikipedia – Aug. 25

Peak Uranium



51. European vacation movie music – Aug. 23

Moving closer to extracting uranium from seawater



52. BBC.co.uk (BBC News) – Aug. 22



53. Science Daily – Aug. 21

Moving closer to extracting uranium from seawater



54. (United Press International) –Aug. 21

Uranium from seawater said attainable goal



55. Earth Times – Aug. 21 – Adrian Bishop

Nuclear power from uranium in seawater gets closer



56. Eureka Alert – Aug. 21 – Michael Bernstein, Michael Woods (215-418-2056)

Advances in decades-old dream of mining seawater for uranium



57. – Aug. 21 – Frances White – 509-375-6904

Fueling nuclear power with seawater



58. The Independent – Aug. 21 – John Von Radowitz

Sea uranium extraction ‘close to economic reality’



59. e! Science News – Aug. 21

Uranium from seawater said attainable goal



60. SBS World News – Aug. 24

Sea uranium extraction becomes more likely



61. – Aug. 22

Extracting uranium from seawater comes closer to reality



62. United Nations University – UNU-MERIT – Aug. 22

Nuclear power could come from the oceans



63. The American Ceramic Society

ORNL HiCap material moves scientists closer to extracting uranium from seawater



................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download