IP 202-1 List of Materials - USDA Rural Development
Changes to the List of MaterialsJune 11, 2024Page k-2 Revised k(1) from Conditional to k-2 Full listings.Added Hubbell Power Systems.May 10, 2024Pages x-1, z-5.2, z-6Added Grip-TiteApril 2, 2024Page be(4.3)Added Togami Electric Mfg. Co., Ltd.Single-phase and Three-phase.March 22, 2024Pages c-1; n-1Moved Threaded Fasteners, Inc. from Conditional to Full Acceptance.December 13, 2023Pages u-1; aa, abCorrections to Allied Bolt catalog numbers.December 5, 2023Page af-1.1Added IUSAType C (porcelain), Type C (polymer).November 1, 2023Page rp(1.4)Added Celeco?August 9, 2023Pages bz-1, bz-2Revised Maysteel Trinetics to Hubbell Trinetics.Added VS models.July 5, 2023Page rp(1.3)Revised Midsun Group, Inc.Changed “E/Bushing Full Cover**” to “E/Silicone Wildlife Covers**”.July 3, 2023Page rp(1.3)Added Midsun Group, Inc.E/Flex Barrier*, E/Anti-Nesting Barrier*, E/Bushing Full Cover**March 27, 2023Page z-5.1Updated Hubbell catalog numbers.March 5, 2023Page g(1.3)Revised Wagner listings to include both 8’ and 10’ arms.March 1, 2023Page g(1.3)Added WagnersCatalog numbers: WGN-S1000, WGN-S3000November 29, 2022Page be(2.3)Added SiemensCMR multi-phase recloser.August 19, 2022Page U hv(1)Added LS Cable and System U.S.A., Inc.(VI) Dow Endurance? HFDC 4202 ECJuly 26, 2022Added page U hv-4Cable, Underground, 600 Volt Cable (Alternative Cable Constructions)May 24, 2022Pages U he-1 and U he-2Added Howard Industries.April 13, 2022Page eq(2.1)Added Fiberglass Line Hardwarecatalog numbers FLH0-1-15C1 and FLHR-1-15V.March 25, 2022Section ai – Ground RodsRevised page numbering for consistency: page ai(1) changed to ai-4; page ai(3) changed to ai-5.March 24, 2022Page rp(1)Added KaddasCatalog numbers KE1501, KE1182-03, KE1203, KE1077 Rev A, KE1079 Rev B, KE1198, KE1166-01.February 18, 2022Pages Uhb-1.2 and Uhb-2.2Moved Richards from page Uhb-1.2 (200A rated) to Uhb-2.2 (600A rated).Removed page Uhb-1.2.February 15, 2022Page p-11Added RichardsCatalog numbers ABWC Series.Pages Uhb-1.2 and Uhb-2Moved Richards CSH Series from page Uhb-1.2 (200A) to Uhb-2 (600A).December 2, 2021Pages p-11, ap-1, ap-2Added AFL.August 3, 2021Page be(2.3)Added SiemensCMRMay 6, 2021Page Ugn-2Added Aluma-FormENC SeriesApril 27, 2021Page Ugk-2.2Added PrysmianPCT Series (15, 25, 35kV)February 9, 2021Page be(4.3)Added Southern States single-phase SSR type recloser.February 4, 2021Pages rp(1), rp(1.2)Revised “Cantega” to “Hubbell Power Systems”.Added trademark to Reliaguard.December 10, 2020Page ap-2Modified page number from “1.1” to “2”.November 18, 2020Pages an-3 and an(3.1)Moved Virginia Transformer from page an(3.1) Conditional to page an-3 Full Acceptance.November 6, 2020Page ae-1Added CelecoCatalog Numbers: HSCEL, RPCELOctober 26, 2020Page Uhb-1.1Added TE ConnectivityCatalog Numbers: 25 kV, used with loadbreak connectors (without test point) - ELB-25-200 series without jacket seal, ELB-25-200-ES series with jacket sealOctober 23, 2020Page p(1)Added TE Connectivity (Raychem)Catalog number: TIL SeriesSeptember 30, 2020Pages a(3), ea(4), ea(5) – Added new Hendrix insulator models.Catalog Numbers: HPI-15VTC, HPI-15VTP, HPI-25VTC-02, HPI-35VTC-02, HPI-35VTP-02, HPI-LP-14FS/FA, HPI-LP-16F, HPI-CLP-15, HPI-CLP-17, HPI-CLP-20July 7, 2020Page cm-2 – Added Aluma-Form, Inc.June 25, 2020Page an(1.1) - Added additional kVA ratings for Prolec GE.Page an(1.2) – Added Prolec GE for non-porcelain bushings.May 21, 2020Added Hubbell Power SystemsPage gj(3)April 20, 2020Pages sd-1.1, se-1.1Added lnstrument Transformer Equipment Corp (ITEC)April 15, 2020Pages cg-4Revised “Bridges Electric” to “Siemens”.Added note to Siemens:applies to both polymer and porcelain insulatorsMarch 27, 2020Pages z(2)Added Watson Anchor.March 23, 2020Page Uhb-1.2Added Richards Manufacturing CS8 Series cold-shrinkable connector and CHS Series deadbreak elbow.Page Ufz-1Added Durham Company 9112212 250 Splice-n-TapMarch 13, 2020Page av-1 Conductor, ACSRAdded WTECFebruary 11, 2020Added CentelsaPage av-1 – Conductor, ACSR Page Uhv-2 – Cable, underground, 600VFebruary 10, 2020Revised all references of “U-1” to “7 CFR 1728.204”.Pages U hv-1, U hv-1.1, U hv(1). February 7, 2020Added SAEPage dh-2 – Pole Ground, Alternative MaterialsCD-2W-12, CD-2WC-12, CD-4C-12, CD-2C-12, CD-1/0C-12, CD-2/0C-12, CC25, CC55, CF7000January 6, 2020Added ConduGroundPage cj(1) - Pole Ground Wire, alternative conductorPage sr(2) - Conductor for Substation Grounding, alternative conductorDecember 26, 2019Revised Malton to American Padmount Systems (APS) listingsPage Ugn-1Remove MEV SeriesPages U gu-2.1, U ja-2Revise Malton to ABBPages U he-1, U he-2, U he-3.2, September 24, 2019af – Cutout, distribution, openAdded Peak Demand Inc.Catalog numbers: FCP series (porcelain) and FCS series (polymer).September 9, 2019w-1 Guy Strain Insulators, fiberglassAdded Preformed Line ProductsGSF16 Series and GSF21 SeriesAugust 16, 2019be(4.3) – Recloser, vacuum interrupter with solid dielectricAdded Southern Statesgo-1 – Fault Indicators, overheadAdded Smart Grid SolutionsFI-5AUgo-1 – Fault Indicators, undergroundAdded Smart Grid SolutionsFI-3CJuly 18, 2019ae-1 – Surge (lightning) Arrester, Distribution ClassAdded CelecoModel PSAMOV-HDDCJune 27, 2019U go – Fault IndicatorsUpdated catalog number for Horstmann.Added new Horstmann model 41-2001.June 19, 2019Uhv(1) Cable, undergroundAdded General Cable insulation:(EAM) General Cable EI-4000-LFMay 15, 2019ea(2) – Insulator, post type (Composite/Polymer)Added new model from K-Line InsulatorsKL 28SKG109 (24.9/14.4kV)sb-2 – Switch, disconnect (single-pole, hook operated distribution class)Added new model from Royal SwitchgearBISL – 15kV thru 25kVMay 14, 2019z(5) – Power Installed Screw AnchorsAdded Oklahoma Design Technologies, LLCSTAD Series and CSTAD SeriesMay 8, 2019z(5) – Power Installed Screw AnchorsAdded Cantsink1.5RCS SeriesUan(1) – Transformers, Distribution, Pad-Mounted, Dead-FrontAdded Power PartnersSingle-phase 5-167 kVAUhy-1.1 – Splice, Underground, PermanentAdded new units from TE Connectivity-EnergyCatalog numbers CSJU-1511, CSJU-S-1511, CSJU-2511, CSJU-S-2511April 24, 2019Uhv(1) – Cable UndergroundAdded LS CableVII insulation without flat strap neutralApril 19, 2019be(2.2) Recloser, vacuum interrupterAdded EatonModel NOVA-NXT.Revised all “Cooper Power Systems” to “Eaton”.April 10, 2019Uhb-1.1 – Cable AccessoriesAdded TE Connectivity-EnergyModels ELB-15-200 and ELB-15-200-ES.November 28, 2018y(3) - Conzinal 95% Zinc - 5% Aluminum+ Mischmetal Alloy (AL-ZN-MM) Coated Steel Wire StrandsAdded Conex Cable LLCNovember 2, 2018y(2) - Zinc - 5% Aluminum - Mischmetal alloy (Zn-5Al-MM) – Coated, Steel Wire StrandsRevised existing listing for Bekaert.Added additional wire sizes.(S-M):1/4", 3/8", & 7/16".(HS):9/32”.(EHS):9/32”.Revised Note to “Class A” coating.October 23, 2018sj(1) – Switches, oil circuit recloser by-passAdded Hubbell (Chance)Type: BPF – 15kV, 27kVsb-2 – Switch, disconnect (single-pole, hook operated distribution class)Added Hubbell (Chance)Type: M3C – 15kV, 27kVAugust 31, 2018cj-1 Pole Ground WireAdded sizes for Copperweld Bimetallics, LLCNo 4 AWG Stranded (7x0680”), No. 4 AWG, No. 2 AWG Stranded (7x0860”), No. 2 AWG, 7 No. 10 AWG, 2/0 (19x0860” & 7x1379”)Revised notes referring to Copperweld Bimetallics, LLCsr-1 Steel Conductor for Substation Grounding, Copper-Clad or GalvanizedMoved from Conditonal [sr(1)] to Full listing [sr-1] Copperweld Bimetallics, LLC7 no 8 AWG, 2/0 (19x0860” & 7x1379”), 7 no 7 AWG, 7 no 6 AWG, 7 no 5 AWG, 7 no 4 AWG, 4/0 (19x1055”), 19 no 9 AWG, 19 no 8 AWG, 19 no 7 AWG, 19 no 6 AWG, 19 no 5 AWGUpdated notes referring to Copperweld Bimetallics, LLC.July 31, 2018af(1) - Cutouts, Distribution, Open with Linkbreak AttachmentAdded Hubbell C-Polymer 27kv and 35kV.July 20, 2018Uhv-1Removed all listings for Crosslinked Polyethylene (XLP).Plain XLP is no longer an acceptable insulation per RUS standards, 7 CFR 1728F.204 (formerly the U-1 spec).July 18, 2018Uhv(1) Cable, undergroundAdded General Cable new tree retardant insulation compound LG XL8080TR (VII).Added LS Cable & Systems (VIII).June 12, 2018c-1 Machine Bolts; o-1 Oval Eye BoltsAdded Action ManufacturingMay 21, 2018a-2 Insualtors, Pin type, polymberAdded Aluma-FormCatalog numbers INS‐15‐PC‐1, 55-3; INS‐15‐PF‐1 55‐4; INS‐25‐PJ‐2May 8, 2018Page rp(1.2) Wildlife GuardsAdded ReliaguardMarch 20, 2018Page g(1.3) Crossarms, fiberglassAdded new Shakespeare modelsWithout centermount: MTN, HTN, TTNWith centermount: STB, MTB, HTB, TTBMarch 19, 2018Page sd-1 Current Transformers, Outdoor TypeAdded new models for ArtecheCatalog numbers for 0.6kV: IRH-1Catalog numbers for 15kV: ME-015, MK-15, MI-015, KM-15, KCB-17Catalog numbers for 25kV: ME-025, MK-25, MI-025, KM-25, KCB-24Catalog numbers for 34.5kV: CRK-36, CE-034, ME-036, MK-36, KM-36Catalog numbers for 69kV: CRH-72, CRK-72, CE-069Page se-1 Voltage Transformers, Outdoor TypeAdded new models for ArtecheCatalog numbers for 15kV: URJ-17, ME-015, MK-15, MI-015, KM-15, KCB-17Catalog numbers for 25kV: URJ-24, VRJ-24, URN-24, VRN-24, ME-025, MK-25, MI-025, KM-25, KCB-24Catalog numbers for 34.5kV: ME-036, MK-36, KM-36Catalog numbers for 69kV: URU-72, VRU-72March 9, 2018Page al(1) Ground Wire StaplesAdded FascoCatalog numbers: EF40-315, EF40-315CUMarch 8, 2018Page U gu-1.1 Pedestal, Power (Above-Grade)Added Nordic Fiberglass additional sizes.Catalog numbers: PSPX-101830-MG, PHH-152315-MGFebruary 2, 2018Page n-1 – Bolt, double armingAdded Action ManufacturingDecember 4, 2017Page z-6 Anchors, Power-Installed Screw, DistributionAdded new units to Hubbell (Chance)Catalog numbers: C1025006, C1025007, C1025010.November 17, 2017Page ap-1.1 Clamp, hot line, ACSR with armor rodsAdded Aluma-FormCatalog numbers: AF-BC20, AF-1540, AF-1530November 2, 2017Page U hv(1) U hv - Cable, Underground, 15 kV and 25 kV CableRevised company name “Superior Essex” to “LS Cable & System U.S.A., Inc.”September 12, 2017Added Page sj(1) Switches, oil circuit recloser by-passAdded Hubbell (Chance)Catalog number: BP3 – 600A, 900ASeptember 8, 2017Page cj-1 Pole Ground WireRevised “CommScope BiMetals” to “AFL Copperclad”Added sizes No. 4 and No. 2Page sr-1 Steel Conductor for Substation Grounding, Copper-Clad or GalvanizedRevised “CommScope BiMetals” to “AFL Copperclad”Added sizes 19 No. 9 AWG and 19 No. 8 AWGJuly 21, 2017Page U he-3.1 Padmounted Switchgear (200 and 600 amp)Added ElastimoldType MVS, single-phase and three phase, 200 and 600 amp, 15-38 kVType MVI, single-phase and three phase, 200 and 600 amp, 15-38 kVJuly 19, 2017Page ah-1 Tie, insulator, formed typeAdded “Alloy Side, Spool and Top Ties” to Preformed Line ProductsAdded Page ea-3 Insulators, post typeAdded Eprecsa USA, LLCcatalog numbers: 13PD, 22PD, 33PDJuly 7, 2017Page ah-1 Tie, insulator, formed typeAdded 3 new products to Preformed Line ProductsEZST-series, TT-series and UT-seriesJune 20, 2017Page sd-1 Current Transformers, outdoor typeRevised company name to “Arteche” from “Arteche USA”.Added CRF-17 and CRH-36, which were omitted from the original listing.Page se-1 Voltage Transformers, outdoor typeRevised company name to “Arteche” from “Arteche USA”.May 1, 2017Page bx-1.1 Splice, automatic, DistributionAdded 2 new splices to Aluma-Form, Inc. listing.Cat. #: ASC1020AAC (1/0 & 2/0), AAAC (1/0 & 2/0), and ACSR (1/0 & 2/0)Cat. # ASC3040AAC (3/0 & 4/0), AAAC (3/0 & 4/0), and ACSR (3/0 & 4/0)April 26, 2017Pages ah-1 and ah(1) Tie, insulator, formed typeMoved Preformed Line Products “EZ-WRAP” ties from Conditional listing on page ah(1) to Full listing on page ah-1.April 25, 2017Page Uan-1 Transformers, Distribution, Pad-Mounted, Dead-Front Added Magnetron S.A.S.Pad mounted 5-167 kVA transformer series.LIST OF MATERIALSAcceptable for Use on Systems of USDA Rural DevelopmentElectrification BorrowersUnited States Department of AgricultureRural Development Utilities ProgramsElectric ProgramsInformational Publication 202-1Current as of June 11, 2024center43815 DISCLAIMEREvery effort has been made to ensure the accuracy of this document. However, in case of discrepancies, records of Technical Standards Committee?“A" are the authoritative source.00 DISCLAIMEREvery effort has been made to ensure the accuracy of this document. However, in case of discrepancies, records of Technical Standards Committee?“A" are the authoritative source.PREFACEThis list supersedes all preceding issues including revisions. Revised sheets reflecting changes in the list will be issued quarterly and should be inserted in order to keep your copy up to date.The items shown in this publication include material and equipment for transmission and distribution facilities. Items not listed include office equipment, tools and work equipment, items of electric general plant and consumer owned wiring facilities. The listings apply only to new items of material and equipment and not to used items.In addition to items accepted on a general basis, this list also includes items accepted on a conditional basis. As one of the conditions in the acceptance of an item on a conditional basis, contractors are required to obtain the borrower’s concurrence prior to its use.The inclusion of an item in this list does not indicate that item’s manufacturer or its principals have not been debarred, suspended, proposed for debarment, declared ineligible or voluntarily excluded pursuant to Executive Order 12549, Debarment or Suspension, or any rules or regulations issued thereunder, including 7 CFR Part 3017 (“Debarment Regulations”). Therefore, borrowers must comply with the requirements imposed by the Debarment Regulations before entering into any “covered transaction”, as defined by 7?CFR Part 3017, involving any item on this list.The acceptance of an additional item or the deletion of an existing item is a function of the Technical Standards Committees. Any manufacturer desiring to have a new item placed on the list, or any user believing an existing item should be removed from the list, is invited to submit the matter to the Committees. Any communication calling attention to an error or omission in the list, such as a wrong catalog number, an obsolete item, etc., will be appreciated. All communications should be addressed to Technical Standards Committee “A” (Electric), USDA Rural Development Utilities Programs, Stop 1569, Washington, D. C. 20250-1569.INDEX – PART I-A-Air break switchescgAnchor rodxAnchor rod bonding clampsckAnchor shackleboAnchorszAngle suspension bracketcrAngle thimble eye boltbaAnodesU siArm assemblies, narrow profileeqArmor grip suspension assemblymArmor grip suspension assembly with socket eyeeiArmor rodsbvArms, laminated upsweptfqArresters, surgeaeAutomatic and formed type deadendsbyAutomatic splicesbx-B-Ball hookehBall, oval eyefpBall, Y-clevisftBolt, angle eye (thimble type)ba carriagei clevisef double armingn double upsetq oval eyeo eye double armingdy machinec shoulder eyeo single upsetbs thimble eye, angleba straight eye (thimble eye)aoBrace, crossarm, steelh crossarm, fiber reinforced plasticcu crossarm, woodcu sidearm diagonalac sidearm verticalbb special crossarmemBracket, angle suspensioncr cutout and arrester extensionfm cutout extensionfn extensionfj insulatedda narrow profileeq offset neutralec oil circuit recloserfk pole top pincs post insulatoreb swinging anglefu transformerdm transformer secondary insulatedfoi-C-Capacitor hangersfdCapacitor oil switchbzCapacitor, shuntfcCarriage boltiChain link (end link)brClamp, anchor rod bondingck deadendl deadend with socket eyeej ground rodaj ground wiredp guyu hot lineap loop deadendbn suspensionm suspension with socket eyeeiClevis boltefClevis type wireholderbtClevis, conduit, insulateddr secondary swingings service deadendbh service swingingas thimbleciClip, ground wireal guydzCombination cutout and arresteraxCombination power fuse and disconnect switchslCompression deadendscpCompression splicescyConductoravConduit clevis, insulateddrConduit wireholderdsConnector, grounding, transformerbu hot linefiConnectorspCross brace assemblyvxCrossarm assemblies and arm spacersgjCrossarm assembly, “Z” type (wishbone)gzCrossarm assembly, H frame (small angle – 161 & 230 kV)gwCrossarm assembly, H frame (tangent – 161 & 230 kV)gyCrossarm brace, sidearm diagonalacCrossarm brace, sidearm verticalbbCrossarm brace, specialemCrossarm brace, steelhCrossarm brace, woodcuCrossarm pin, steelfCrossarm reinforcing plateegCrossarm saddlefgCrossarmsgCurrent limiting backup fusesagCurrent transformerssdCutout and arrester extension bracketfmCutout and arrester, combinationaxCutout extension bracketfnCutouts and fusesafii-D-Deadend clamplDeadend clamp with socket eyeejDeadend for guy stranduDeadend for steel strandlDeadend, automatic & formed typeby compressioncp secondarycq servicedtDisconnect switch, hook operatedsbDouble arming boltnDouble arming eye boltdyDouble arming platectDouble upset boltq-E-Elliptical eye screwdqEnd link (chain link)brExtension linkduExtension link (fiberglass)euEye bolt, double armingdy ovaloEye nutaaEye screw, ellipticaldq-F-Fault Indicators……………………………………….goFiber reinforced plastic crossarm bracescuFuses and cutoutsafFuses, current limiting, backupag power, substationaf-G-Gain, polebiGrid gainbiGround rod clampajGround rodsaiGround wire clampdpGround wire clipalGround wire staplealGround wire support, overheadedGround wire, polecjGround, poledhGrounding conductor, substation, coated steelsrGrounding connector, transformerbuGuy attachment (Distribution)vGuy attachment (Transmission)fvGuy clampuGuy clipdzGuy deadenduGuy hookbjGuy markeratGuy platebkiiiGuy strain insulatorwGuy wireyGuy wire clipdzGuying platefv-H-H frame crossarm assembly (small angle – 161 & 230 kV)gwH frame crossarm assembly (tangent – 161 & 230 kV)gyHangers, capacitorfdHook, balleh guybjHook operated disconnect switchsbHot line clampapHot line connectorfi-I-Insulated bracketdaInsulator and stud, post typeeaInsulator, guy strainw pin typea polymer distribution deadendk spoolcm suspensionk-K-Keys, polez-L-Laminated upswept armsfqLag screwjLink, chain (end link)br extensiondu extension (fiberglass)euLocknutsekLoop deadend clampbn-M-Machine boltcMarker, guyatMeter socketsgbMeters, watthourga-N-Narrow profile brackets and arm assemblieseqNeutral bracket, offsetecNumbers, pole and lettersazNut, eyeaa thimble eyeabiv-O-Offset neutral bracketecOil circuit recloser bracketfkOil circuit reclosersbeOval eye ballfpOval eye boltoOval tube splicecxOverhead ground wire supported-P-Pin type insulatoraPin, crossarmf pole top, steelbPipe spacerdlPlastic wire guarderPlate, crossarm reinforcingeg double armingct guybk pole bearingfs pole eyevPole bearing platefsPole eye platevPole gainbiPole grounddhPole ground wirecjPole keyszPole numbers and lettersazPole top pin bracketcsPole top pin, steelbPost insulator bracketebPost type insulator and studeaPower fuses, substationafPrimary metering rackfl-R-Rack, primary meteringflReclosers, automatic circuitbeRegulator by-pass switchskRegulators, voltagescRod, anchorxRods, armorbv groundai-S-Saddle crossarmfgScrew, elliptical eyedq lagjSecondary swinging clevissSectional ground rodsaiSectionalizerelService deadenddtService deadend clevisbhService swinging clevisasvShackle, anchorboShoulder eye boltoShunt capacitorsfcSidearm diagonal crossarm braceacSidearm vertical crossarm bracebbSingle upset boltbsSockets, metergbSpacer, pipedlSpecial crossarm bracesemSplice cover, plasticesSplice for steel strandczSplice, automaticbx compressioncy formed typeex oval tubecxSpool InsulatorcmSpring washerawStaple, ground wirealSteel strandyStructure assembly (small angle – 161 & 230 kV)gwStructure assembly (tangent – 161 & 230 kV)gySubstation grounding conductor, coated steelsrSupport, overhead ground wireedSurge arrestersaeSuspension clampmSuspension clamp with socket eyeeiSuspension insulatorkSwinging angle bracketfuSwitch, capacitor oilbz combination power fuse and disconnectsl hook operated disconnectsb pole top air breakcg recloser, by-passsj regulator by-passsk-T-Thimble clevisesciThimble eye bolt, anglebaThimble eye bolt, straightaoThimble eye nutabTie, insulator, formed typeahTransformer bracketdmTransformer grounding connectorbuTransformer secondary bracket, insulatedfoTransformers, currentsd pole and poweran voltagese-V-Vacuum circuit reclosersbeVoltage regulatorsscVoltage transformerssevi-W-Washer, springawWashersdWatthour metersgaWildlife guardsrpWire guard, plasticerWire, guyyWireholderarWireholder, clevis typebt conduitdsWood crossarm bracecu-Y-Y-clevis ballft-Z-“Z” type (wishbone) crossarm assemblygzviiINDEX – PART IIUnderground Distribution EquipmentAnodesU siArrester, surgeU aeBoot, insulatedU gqBracket, combinationU hj pothead mountingU hdCableU hvCable accessoriesU hbCable route markerU hxCable supportU hcCombination cutout and arresterU axConnector block, secondaryU gp transformerU fzConnector, secondary tapU fwCutout and arrester, combinationU axEnclosure, equipmentU gnFault indicatorU goHeat shrink tubingU hrJacketed cable restoration kitsU hfPad, equipmentU jaPedestal, powerU guRecloser, pad-mountedU beRegulator, voltage, pad-mountedU scSafety signsU hwSecondary tap connectorU fwSecondary tap or splice coverU hrShield, cable riserU gc spliceU jbSplice shieldU jbSplice, secondaryU gp undergroundU hyStake, power pedestalU gvSwitch, air, group-operatedU cgSwitchgear, padmountedU heTerminations, elbowU hp multipointU hq outdoor and indoorU gkTerminator sealing kitU hfTransformer connector blockU fzTransformer padU jaTransformer, currentU sdTransformersU anTubing, heat shrinkU hrviiia-1April 2015a – Insulator, pin type, porcelainANSI Class55-255-355-4Application5 kV12.5/7.2 kV and 13.2/7.62 kV systems12.5/7.2 kV and 13.2/7.62 kV systems (where greater insulation is needed)Pinhole diameter1 in.1 in.1 in.ICBICB 552ICB 553ICB 554Porcelain Products (Knox) 2253261-S366-SVictor Insulators, Inc.85, VI 605R6, VI 606RGamma Insulators Corp.6188R-706184R-706183R-70ANSI Class56-156-356-4Application24.9/14.4 kVdistribution lines33 – 34.5 kVtransmission lines44 – 46 kVtransmission linesPinhole diameter1-3/8 in.1-3/8 in.1-3/8 in.Metal thimble(unless noted)Metal thimbleMetal thimbleICBICB 561--Groupo IUSA1P-3000--Porcelain Products (Knox) -2045-S- Victor Insulators, Inc.27-R1, VI 627R245-R, VI 645R255-RGamma Insulators Corp.8248R-708190R-70-1Does not have a metal thimble.2ANSI class 55-2, 55-3, and 55-4 pin insulators manufactured at both the Knoxville and Macomb plants are acceptable.a-2May 2018a – Insulators, pin type, polymerManufacturerCatalog NumberANSI ClassAdvanced Rubber ProductsARP-SKPI-55-355-3ARP-SKPI-56-156-1Aluma-FormINS-15-PC-155-3INS-15-PF-155-4INS-25-PH-256-1HendrixHPI-55-355-3HPI-55-455-4HPI-25-J-0256-1Preformed Line ProductsIP-15-C55-3IP-15-F 55-4IP-25-J256-1a(3)September 30, 2020a – Insulators, pin type, composite, vise topManufacturerCatalog NumberANSI ClassConditionsHendrixHPI-15VTC55-4To Obtain Experience. For use with Conductor Diameters of 1.75 inches or less.HPI-15VTP55-4HPI-25VTC-0256-1HPI-35VTC-0255-7HPI-35VTP-0255-7b-1July 2009b – Pin, pole top, steelDISTRIBUTION12.5/7.2 or 13.2/7.62 kV24.9/14.4 kVPin length, inches:2020Thread diameter, inches:11-3/8Hole spacing, inches:88RUS Specification:D-3DT-3Hubbell (Chance)21992195JoslynJ740J720Kortick-K8086MacLean (Continental)U36606F-REAU36652Pins listed below have 4-1/2” offset which eliminates the use of Item csHubbell (Chance)C206-0271JoslynJ25179MacLean (Continental)U36549TRANSMISSIONPin Length, inches:24Thread diameter, inches:1-3/8Hole spacing, inches:8RUS Specification:DT-3Hubbell (Chance)2196KortickK8087MacLean (Continental)U36653FNOTE Flared type pins may be mounted with either side against the pole.Conditional Listb(1)January 2015b – Pin, pole-top(Non-lead threads)ManufacturerConditionsHubbell Power Systems2195P (1-3/8” threads)2199P (1” threads)To obtain experience.Hughes Brothers2770-A20-100 (1” threads)2770-A20-130 (1-3/8” threads)To obtain experience.JoslynJ740Z (1” threads)J720Z (1-3/8” threads)To obtain experience.b – Pin, Fiber-reinforced plastic pole topManufacturerConditionsJoslyn7581-624NT (1” threads)*7581-624XNT (1-3/8” threads)** Add suffix LT (less tabs) if for steel pole.To obtain experience.c-1March 22, 2024c – Bolt, machineApplicable Specification: ANSI C135.1, “Standards for Galvanized Steel Bolts and Nuts” except that the lengths are in the ranges given below.Applicable Sizes:? inch diameter, 6 through 10 inch length5/8 inch diameter, 6 through 24 inch length? inch diameter, 6 through 26 inch length7/8 inch diameter, 6 through 28 inch lengthThe following manufacturers have shown compliance with the applicable specifications for machine bolts:Action ManufacturingAllied Bolt, Inc.Hughes Brothers*Joslyn Manufacturing CompanyKortick Manufacturing CompanyMacLean (Continental)*Portland Bolt & Manufacturing CompanyThe Rockford Bolt & Steel CompanySteel City Bolt & Screw Co., Inc.Threaded Fasteners, Inc.*”Static proof” design available.d-1November 2010d – Washers, FlatFlat Rolled SteelSize, inches:2-1/4 x 2-1/43 x 34 x 44 x 41-3/8round1-3/4 roundThickness, in.:3/16?3/16?12 gauge10 gaugeHole Diam., in.:13/1613/1613/1613/169/1611/16Allied Bolt, Inc.115501155111557-1041103C & C Spacer4-----FWCFW1076-FW1080-FW1086FW1088Hubbell (Chance)6814681768186819-1/268036805HughesSW2-1/4-70-3/16SW3-70SW4-70SW4-70(1/2)RW1-3/8-50-JoslynJ1076J1079J1080-J1086J1088KortickK1553K1555K1557K1559-1/2K1524K1525Line HardwareSWF-225BSWF-300BSWF-400A---MacLean (Continental)U5485U5487AU5488U5490AU5478U5479Wrought Washer011206-----Flat CastSize, inches:3 x 3Thickness, in.:?Hole Diam., in.:13/16Hubbell (Chance) (N)BB214Joslyn (Flagg) (N)P56ASpurred – 3” Round, 3/16” Thick, 13/16” HoleMacLean (Continental) TCSF-30-6(A) Aluminum Alloy(M) Malleable Iron(N) Nodular Irond-2September 2010d – Washers, CurvedCurved CastSize, inches:2-1/4 x 2-1/43 x 33 x 44 x 4Thickness, in.:?5/167/16?Hole Diam., in.:11/1611/1615/1613/16Hubbell (Chance) (N) GCW1AGCW31CRW4AGCW41Joslyn (Flagg) (M)P141P143P120P144Line Hardware (M)-CW 33-5CW 34-7CW 44-6MacLean (Bethea) -WC-33-5WC-34-7WC-44-6MacLean (Continental)-CW-33-5CW-34-7CW-44-6M.D. Henry Company, Inc. (A)UW-225UW-335UW-347UW-446(A) Aluminum Alloy(M) Malleable Iron(N) Nodular IronCurved Rolled SteelSizes, inches:4 x 4(1)Thickness, in.:?Hole Diam., in.:15/16Joslyn (Steel)J6829To be used only on transmission systems.f-1July 2009f – Pin, crossarm(With square washer, nut and MF locknut)DISTRIBUTIONThread (inches diam.)11-3/811-3/8Length above base (in.)5757Length below base (in.)5-3/471-1/21-3/4Shank (inches diam.)5/85/85/8?Long ShankShort ShankHubbell (Chance)8814717886-JoslynJ203J647J221J630KortickK7104K7611K7122K7631MacLean (Continental)U558U3137AU579U3142Clamp Type PinThread (inches diam.)11-3/8Length above base (in.)5-3/47Hubbell (Chance)1432214322-1JoslynJ3322J3324Washer Plate for Clamp Type PinThese plates are equipped with lugs to prevent slippage of pin along crossarm. They may be used to replace the bottom plate on pins already installed.Hubbell (Chance)450091f-2July 2009f – Pin, crossarm(With square washer, nut and locknut)TRANSMISSIONThread (inches diameter)1-3/81-3/8Length above base (inches)1010Length below base (inches)71-3/4Shank (inches diameter)??Long ShankShort ShankHubbell (Chance)4332-JoslynJ610J633KortickK7643K7635MacLean (Continental)U3140U3145Conditional Listf(1)July 2009f – Pin, crossarm(Non-lead threads)(With square washer, nut and MF locknut)ManufacturerConditionsHubbell881P – 1” thread, 5 ?” shank886P – 1” thread, 1 ?” shankTo obtain experience.Hughes Brothers2775-A5-3/4, 1” thread, 5-3/4” shankTo obtain experience.JoslynJ203Z, 1” thread, 5-3/4” shankJ221Z, 1” thread, 1-1/2” shankJ647Z, 1-3/8” thread, 7” shankJ630Z, 1-3/8” thread, 1-3/4” shankTo obtain experience.Conditional Listg(1)April 2016g – Crossarms, fiberglassManufacturerDescriptionConditionsAluma-Form, Inc.*FTA20-4-968’To obtain experience.FTA20-6-968’FTA20-6-12010’FTA25-4-968’FTA25-6-968’FTA25-6-12010’FTA30-4-968’FTA30-6-968’FTA30-6-12010’Creative Pultrusions, Inc.To obtain experience.Braced ApplicationMT30962N (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternMT30962N (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternMT31202N (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternHT40962N (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternHT40962N (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternHT41202N (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternHT60962N (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternHT60962N (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternHT61202N (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternHT80962N (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternHT80962N (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternHT81202N (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternBraceless (centermount) ApplicationMT30962I (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternMT30962I (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternMT31202I (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternHT40962D (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternHT40962D (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternHT41202D (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternHT60962M (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternHT60962M (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternHT61202M (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternHT80962P (with Horizontal Bushing at Center Hole) 8' Type 3 Drill PatternHT80962P (with Horizontal Bushing at Center Hole) 8' Type 4 Drill PatternHT81202P (with Horizontal Bushing at Center Hole)10' Type 5 Drill PatternConditional Listg(1.1)April 2016g – Crossarms, fiberglassManufacturerDescriptionConditionsGeotek (PUPI) Braced ApplicationT220009603X (with horizontal bushing at center hole) 8’ Type-3 Drill PatternTo obtain experience.T220009604X (with horizontal bushing at center hole) 8’ Type-4 Drill PatternT220012005X (with horizontal bushing at center hole)10’ Type-5 Drill PatternT200009603X 8’ Type-3 Drill PatternT200009604X 8’ Type-4 Drill PatternT200012005X10’ Type-5 Drill PatternT300009603X 8’ Type-3 Drill PatternT250009603X 8’ Type-3 Drill PatternT250009604X 8’ Type-4 Drill PatternT250012005X10’ Type-5 Drill PatternT300009604X 8’ Type-4 Drill PatternT300012005X10’ Type-5 Drill Pattern Braceless (Centermount) ApplicationTZ220209603X 8’ Type-3 Drill PatternTo obtain experience.TB220009603X 8’ Type-3 Drill PatternTo obtain experience.TB220009604X 8’ Type-4 Drill PatternTB220012005X10’ Type-5 Drill PatternTB200009603X 8’ Type-3 Drill PatternTB200009604X 8’ Type-4 Drill PatternTB200012005X10’ Type-5 Drill PatternTB300009603X 8’ Type-3 Drill PatternTB250009603X 8’ Type-3 Drill PatternTB250009604X 8’ Type-4 Drill PatternTB250012005X10’ Type-5 Drill PatternTB300009604X 8’ Type-4 Drill PatternTB300012005X10’ Type-5 Drill PatternTZ220209604X 8’ Type-4 Drill PatternTZ220212005X10’ Type-5 Drill Pattern*May be used in Braceless or Braced Application.Conditional Listg(1.2)April 2016g – Crossarms, fiberglassManufacturerDescriptionConditionsMacLean Power SystemsBraced ApplicationPW08REA003 8’ Type-3 Drill PatternTo obtain ExperiencePW08REA004 8’ Type-4 Drill PatternPW08REA005 8’ Type-5 Drill PatternPX08REA003 8’ Type-3 Drill PatternTo obtain ExperiencePX08REA004 8’ Type-4 Drill PatternPX10REA00510’ Type-5 Drill PatternBraceless (Centermount) ApplicationPW08ST003 8’ Type-3 Drill PatternTo Obtain ExperiencePW08ST004 8’ Type-4 Drill PatternPW10ST00510’ Type-5 Drill PatternPX08ST003 8’ Type-3 Drill PatternTo obtain ExperiencePX08ST004 8’ Type-4 Drill PatternPX10ST00510’ Type-5 Drill PatternPowertrusion International, Inc. Braced ApplicationPST08001NR03PST08001NR04PST10001NR05PHT08001NR03PHT08001NR04PHT10001NR05 Braceless (Centermount) ApplicationPST08001BR03PST08001BR04PST10001BR05PHT08001BR03PHT08001BR04PHT10001BR05 8’ Type-3 Drill Pattern 8’ Type-4 Drill Pattern10’ Type-5 Drill Pattern 8’ Type-3 Drill Pattern 8’ Type-4 Drill Pattern10’ Type-5 Drill Pattern 8’ Type-3 Drill Pattern 8’ Type-4 Drill Pattern10’ Type-5 Drill Pattern 8’ Type-3 Drill Pattern 8’ Type-4 Drill Pattern10’ Type-5 Drill PatternTo obtain experience.To obtain experience.*May be used in Braceless or Braced Application.Conditional Listg(1.3)March 5, 2023g – Crossarms, fiberglassManufacturerDescriptionConditionsShakespeare without Center MountTo obtain experience.STN096N0040(X)**8’ Type-3 Drill PatternSTN096N0060(X)**8’ Type-4 Drill PatternSTN120N0060(X)**10’ Type-5 Drill PatternMTN096N0040(X)**8’ Type-3 Drill PatternMTN096N0060(X)**8’ Type-4 Drill PatternMTN120N0060(X)**10’ Type-5 Drill PatternHTN096N0040(X)**8’ Type-3 Drill PatternHTN096N0060(X)**8’ Type-4 Drill PatternHTN120N0060(X)**10’ Type-5 Drill PatternTTN096N0040(X)**8’ Type-3 Drill PatternTTN096N0060(X)**8’ Type-4 Drill PatternTTN120N0060(X)**10’ Type-5 Drill Pattern with Center MountTo obtain experience.STB096N1240(X)**8’ Type-3 Drill PatternSTB096N1260(X)**8’ Type-4 Drill PatternSTB120N1260(X)**10’ Type-5 Drill PatternMTB096N1240(X)**8’ Type-3 Drill PatternMTB096N1260(X)**8’ Type-4 Drill PatternMTB120N1260(X)**10’ Type-5 Drill PatternHTB096N1240(X)**8’ Type-3 Drill PatternHTB096N1260(X)**8’ Type-4 Drill PatternHTB120N1260(X)**10’ Type-5 Drill PatternTTB096N1240(X)**8’ Type-3 Drill PatternTTB096N1260(X)**8’ Type-4 Drill PatternTTB120N1260(X)**10’ Type-5 Drill Pattern(**X=2-gray color or 5-dark bronze color)DIS-TRAN Wood Products, LLCCTLBC Series, CTSBC Series,CTHBC Series, CTLBB Series,CTSBB Series, CTHBB Series,8’ Type-3 and Type-4,10’ Type-5 Drill PatternTo obtain experience.WagnersTo obtain experience.WGN-S10008’ or 10’WGN-S30008’ or 10’Note: Gripping studs or teeth on clamp type crossarm pins (item f) should not be installed against the surface of the fiberglass crossarms.Conditional Listg(2)July 2009g – Crossarms, compositeManufacturerDescriptionConditionsPetroflex North America, Inc. Braced ApplicationCA-8(X)**(**X=B for black color X=G for grey color) 8’ Type-4 Drill Pattern To obtain experience.h-1September 2015h – Brace, crossarm, steelWherever item “h” is shown on a construction drawing, use a brace from page cu.i-1i – Bolt, carriageApplicable Specification: ANSI C135.1, “Standard for Galvanized Steel Bolts and Nuts.”Applicable Sizes:3/8 inch diameter, 3 through 6 inch length?2 inch diameter, 3 through 6 inch lengthThe following manufacturers have shown compliance with the applicable specifications for carriage bolts.Allied Bolt, Inc.Hubbell (Chance) Hughes BrothersJoslyn Manufacturing CompanyKortick Manufacturing CompanyMacLean (Continental)The Rockford Bolt & Steel Companyj-1November 2010j – Screw, lagApplicable Specifications: ANSI C135.3 “Standard for Zinc Coated Ferrous Lag Screws”Applicable Sizes: 1/2 inch diameter, 4 inch length1/2 inch diameter, 5 inch length5/8 inch diameter, 4 inch length5/8 inch diameter, 5 inch lengthThe following manufacturers have shown compliance with the applicable specifications for lag screws:Allied Bolt, Inc.Hubbell (Chance)Joslyn Manufacturing CompanyKortick Manufacturing CompanyMacLean (Continental)k-1June 2012k – Insulators, suspensionANSI?Class52-9A52-152-452-3TypeClevisClevisClevisBall?&?SocketDisc?Diameter4-1/4”6”9” or 9-1/2”9” or 9-1/2”M?&?E?Rating,?lbs.10,00010,00015,00015,000Leakage6-3/4”7”11-1/2”11-1/2”Flashover,?kV:?Dry60608080Flashover, ?kV:?Wet30305050NOTES(3) (4)(3) (4)(5)(2)ManufacturerCatalog NumberICBICB 529-AICB 521--Lapp--91009000Locke160441658315S41015S409Gamma Insulators Corp.6815-706605-7082658267825582568257SediverCT-4R2-M---Victor Insulators, Inc.817804--ANSI?Class52-352-452-552-6TypeBall?&?SocketClevisBall?&?SocketClevisDisc?Diameter10”10”10”10”M?&?E?Rating,?lbs.15,00015,00025,00025,000Leakage11-1/2”11-1/2”11”11”Flashover;?kV:?Dry80808080Flashover,?kV:?Wet50505050NOTES(2)(1)(2)-ManufacturerCatalog NumberGEC Alsthom-105452--Lapp820081003014252300Locke-20S580-30S257Gamma Insulators Corp.--8258-Porcelain Prod. (Knox)8102281012--Sediver-CT-8R2--Notes:Use two for 24.9/14.4 kV deadends.To be used only on transmission lines.To be used only on distribution lines. Use two insulators for 12.5/7.2 kV deadends and three for 24.9/14.4 kV deadends. Use two insulators for 24.9/14.4 kV deadends. k-2June 11, 2024k – Insulator, suspension, Toughened GlassManufacturerSediver10” suspension insulatorN-8R2 (ball & socket, 20,000 lbs.)CT-14R2 (clevis, 30,000 lbs.)N-14R2 (ball & socket, 30,000 lbs.)Hubbell Power Systems10” suspension insulatorPSN70146 (ball & socket, 15,000 lbs.)PSN100146 (ball & socket, 22,000 lbs.)PSN12146 (ball & socket, 25,000 lbs.)PSN14146 (ball & socket, 30,000 lbs.)11” suspension insulatorPSN160146 (ball & socket, 36,000 lbs.)PSN180146 (ball & socket, 40,000 lbs.)PSN21156 (ball & socket, 50,000 lbs.)Conditional Listk(3)February 2015k – Insulator, polymer distribution deadendManufacturerConditionsAluma-FormDEI-15DEI-28DEI-25/35DEI-35To obtain experience.For use as deadends on distribution lines only.Not recommended for use in areas subject to contamination.Advanced Rubber Products*ARP-15EACE-I (EPDM – 15 kV)ARP-25EACE-I (EPDM – 25 kV ARP-35EACE-I (EPDM – 35 kV)ARP-15SKCE-S (Silicone – 15 kV)ARP-15SKCE-A (Silicone – 15 kV)ARP-25SKCE-S (Silicone – 25 kV) ARP-27SKCE-SSI (Silicone – 25 kV) ARP-35SKCE-S (Silicone – 35 kV)Same as above.* A = Aluminum end-fitting, I = Cast iron end-fitting, S = Steel end-fittingDulmisonH-15 kV-4H-25 kV-6Same as above.GLPDS-15 (15 kV)DS-28 (25 kV)Grupo IUSASame as above.ASSI-15-70 (15 kV)ASSI-25-70 (25 kV)ASSI-35-70 (35 kV)Hubbell (Ohio Brass)Veri*Lite PDI401015-0215 (15 kV)401025-0215 (25 kV)401028-0215 (25kV) (DS-28)401035-0215 (35 kV)401046-0215 (35 kV) DS-46)Same as above.K-LineKL-15ASCTM (15 kV line-to-line)KL-28ASCTM (25 kV line-to-line)KL-35SCTM (35 kV line-to-line)Same as above.MacLean (Reliable)DS-15G (15 kV)DS-15M (15 kV) (metal end fittings)DS-28G (25 kV)DS-28M (25 kV) (metal end fittings)DS-35G (35 kV)DS-35M (35 kV) (metal end fittings)Same as above.NOTE: When insulators from this page are used, adjust construction drawing material list quantities as necessary. Recommended maximum working load is 5,000 lbs.Conditional Listk(3.1)November 2015k – Insulator, polymer distribution deadendManufacturerConditionsPorcelain ProductsPDEI-15, 15 kVPDEI-25, 25 kVTo obtain experience.For use as deadends on distribution lines only.Not recommended for use in areas subject to contamination.Pyungil Co. LtdDN15SD-CT, 15kVSame as above.DN28SD-CT, 28kVDN35SD-CT, 35kVSalisbury9501U-SI (silicone – 15 kV)9502U-SI (silicone – ANSI DS-28)9503U-SI (silicone – 35 kV)9502L-EP (silicone – 25 kV)Same as above.SediverODI-11-70-15 (15 kV) ODI-15-70-28 (25 kV) ODI-17-70-35 (35 kV)Same as above.Victor Insulators, Inc.8015 (15kV)8025 (25kV)8035 (35kV)8215 (15kV)8225 (25kV)8235 (35kV)Same as above.Volt Tek1515-00 (EPDM – 15 kV)2515-00 (EPDM – 25 kV)3515-00 (EPDM – 35kV)1515S-00 (Silicone – 15kV)2515S-00 (Silicone – 28kV)3515S-00 (Silicone – 35kV)Same as above.Electroporcelana Gamma S.A.PS015 (15kV)To obtain experience.For use as deadends on distribution lines only.Not recommended for use in areas subject to contamination.PS025 (25kV)PS035 (35kV)NOTE: When insulators from this page are used, adjust construction drawing material list quantities as necessary. Recommended maximum working load is 5000 lbs.l-1November 2014l – Clamp, deadendDISTRIBUTIONCopper 2 through 6ACSR (Aluminum Clamps)CWC 4A through 8A4/0 & 3/02/01/02&4-AFL30230230230280500-2000Hubbell (Anderson)PG-57NPG46NPG-46NPG-46N-C & RCR-20-90CR-10-90CR-10-90CR-10-90-Lapp306120N306118N 306118N306118N-MacLean (Bethea)DA-20N DA-15-NDA-15-NDA-15-Nl-2November 2014l – Deadend for steel strand (overhead ground wire)TRANSMISSIONFor high strength, extra high strength steel strand and aluminum clad steel strandHigh Strength SteelAluminum-clad steelExtra High StrengthManufacturer3/8”7/16”7 No. 9 AWG7 No. 8 AWG7 No. 7 AWG5/16”3/8”7/16”Compression TypeAFL4620.124627.14BurndyYTW375EYTW438EYTW7M9TYTW7M8TYTW7M7THubbell (Fargo)861255861430861225861227861430861022861225861430Formed Type*Helical Line Prod.HG210-3/8HG211-7/16HG523-12.5MHG525-16MHG528-20MHG209-5/16HG210-3/8HG211-7/16Hubbell (Chance)16M-AWTLG20M-AWTLG* Class B galvanizing. When overhead ground wire has Class C galvanizing, formed deadend should also have Class C galvanizing.Automatic TypeHubbell (Fargo)GDE-302GDE-303GDE-302GDE-302GDE-303GDE-301GDE-302GDE-303MacLean (Reliable)52025203520252025203520152025203Clamp TypeMacLean (Continental)FQD-55-3LWFQD-55-3-LWHubbell (Anderson)SWDE-55NSWDE-55NMacLean (Bethea)FD-550-NConditional Listl(1)December 2015l – Clamp, deadendDISTRIBUTION2-Bolt Straight Line, Aluminum Alloy*ManufacturerConditionsBurndyAluminum alloy deadendCatalog No. CUW26RE-1 (#2-2/0 Str. Aluminum, #4-2/0 ACSR)1. To obtain experience.2. Applications limited to replacements under hot line conditions.C & R ProductsCatalog No. CRDE-10-180 (#4 – 2/0 ACSR)Catalog No. CRDE-20-180 (3/0 – 4/0 ACSR)Same as above.Hubbell (Anderson)Aluminum alloy deadendCatalog No. ADSO-88(#2-1/0 ACSR)Catalog No. ADS-48-N (2/0 ACSR)Catalog No. ADS-60-N (3/0 ACSR)Same as above.Hubbell (Chance)Aluminum alloy deadendCatalog No. SDF10A (4 through 4/0 ACSR)Same as above.Hubbell (Fargo)Aluminum alloy deadendCatalog No. GD-961A side opening keeper (No. 4 and No. 2 ACSR)Catalog No. GD-972A (2/0, 3/0, 4/0 ACSR)Same as above.MacLean (Bethea)Aluminum alloy deadendCatalog No. ASO-684-2 (1/0, 2/0, 3/0 ACSR)Catalog No. ASD-2-N (4-2/0 ACSR)Catalog No. ASD-34-N 3/0, 4/0 ACSRCatalog No. HDSO 57 (with side opening) (4-4/0 ASCR)Same as above.Aluma-FormSame as above.Catalog# DES-ASD-1 8 - 2/0 ACSRCatalog# DES-ASD-45 4/0 - 477 ACSRCatalog# DES-ASO-398-1 6 - 2/0 ACSRCatalog# DES-ASO-684-1 4 - 336.4 ACSR (Side Opening)Catalog# DES-ASO-858-2 4 - 556.5 ACSR (Side Opening)Catalog# DES-HDSO-47 8 - 2/0 ACSR (Side Opening)Catalog# DES-HDSO-57 4 - 4/0 ACSR (Side Opening)Catalog# DES-HDSO-82 2-477 ACSR (Side Opening)Catalog# DES-HDSO-88L-6 4-556.5 ACSR (Side Opening)*Straight line deadend clamps are applicable for urban construction where tensions are moderate and on lines often worked hot.Conditional Listl(2)July 2009l – Clamp, deadendDISTRIBUTION(wedge type)ManufacturerConditionsHubbell (Fargo)GDW-2010A (#4 – 2/0 ACSR) Bare Aluminum jawsGDW-2010 (#4 – 2/0 Str Cu) Plated Aluminum jaws for use with copper conductorGDW-2040A (#4 – 4/0 ACSR) Bare Aluminum jawsGDW-2040 (#4 – 3/0 Str Cu) Plated Aluminum jaws for use with copper conductorGDW-556 (266.8 – 477 kcmil ACSR)To obtain experience.m-1November 2014m – Clamp, suspension2 BOLT – DISTRIBUTIONCopperACSR with Straight or Formed Armor Rods& CWC421/0 & 2/03/0 & 4/0ABB62406241624262436244AFL----HSU*C & R Products---CRSC-1CRSC-2Dulmison ----HSU*Hubbell (Anderson)MS-46-NMS-60-NMS-70-NHAS-85-NHAS-104-NHubbell (Chance)FWG1FWG2FWG3FWG4-Lapp305740N306027N306028N306029N306030NMacLean (Bethea)FS-46-NGW-1-NLS-0-NLS-1-NLS-2-NMacLean (Continental) FSC-46-NFSC-60-NSC-70-NSC-85-NSC-105-NPreformed Line Products----AGS**Accepted for larger sizes.m-2July 2009m – Clamp, SuspensionANGLE – DISTRIBUTIONNo. 2 & 4 ACSRPlus Rods2-BOLT TRANSMISSIONFor 3/8” Steel OverheadGround Wire2300ABB 6240MacLean (Continental)FSC-46NAAC-301 & 302Hubbell (Anderson)MS-46-N-Hubbell (Chance) FGW1GD-907AHubbell (Fargo)-306092Lapp305740NAC-60Line Hardware-RALS-1MacLean (Bethea)Conditional Listm(1)July 2009m – Clamp, suspension – cushionedCondition: To obtain experienceACSRkcmil266.8336.4477556.5795954PreformedCGS-1100CGS-1102CGS-1105CGS-1106CGS-1110CGS-1112Conditional Listm(2)April 2015m – Clamp, suspension, high temperatureFor use with High Temperature ConductorsManufacturerConditionsPreformed Line Products (PLP) Suspension SystemTo be used with CTC Global High Temperature Conductors ACCC (Aluminum Conductor Composite Core) To obtain experience.Use high temperature accessories approved by the manufacturer and accepted by RUSNote: These clamps are acceptable when installed using tools and dies in accordance with the conductor manufacturer’s recommendations.n-1March 22, 2024n – Bolt, double armingApplicable Specification: ANSI C135.1, “Standard for Galvanized Steel Bolts and Nuts.”Applicable Sizes:5/8 inch diameter, 12 inch through 24 inch length? inch diameter, 20 inch through 24 inch lengthThe following manufacturers have shown compliance with the applicable specifications for double arming bolts:Action ManufacturingAllied Bolt, Inc.Hubbell (Chance) Hughes Brothers*Joslyn Manufacturing CompanyKortick Manufacturing CompanyMacLean (Continental)Portland Bolt & Manufacturing CompanySteel City Bolt & Screw Co., Inc.Threaded Fasteners, Inc.*”Static proof” designs available.o-1June 2018o – Bolt, eye, ovalApplicable Specification:ANSI C135.4, “Standards for Galvanized Ferrous Eye Bolts and Nuts for Overhead Line Construction.”Applicable Sizes:5/8 inch diameter, 6 through 20 inch length3/4 inch diameter, 8 through 20 inch lengthThe following manufacturers have shown compliance with the applicable specifications for oval eye bolts:Action ManufacturingAllied Bolt, Inc.Berny’s Forging Company*Joslyn Manufacturing CompanyHubbell Power Systems (5/8 inch diameter ONLY)Kortick Manufacturing CompanyMacLean (Continental)*”Static proof” designs available.Shoulder Eye Boltfor Transmission Structures?4 inch diameter, 8 inch through 20 inch lengthCatalog Number JoslynJ9528 to J9540KortickK9558 to K2570p-1November 2014p – Connectors, distribution (Parallel Groove)Applicable Specification: ANSI C119.4ACSR to ACSRTo same size or smallerBare Conductor4/0 – 2/01/024AFL-396.6490.0490.0BlackburnPAE 4141-9PAE 2121-9PAE 2121-9PAE 2121-9BurndyKVS28AUCG25RUC25R2RUC25R2RConnector Mfg.APC-2/0APC-2/0APC-1/0APC-1/0Hubbell (Anderson)LC-53ALC-51CLC-51ALC-51AHubbell (Fargo)GA-9040LGA-9020L GA-9002LGA-9003LMacLean (Reliable)APG-3APG-2APG-1APG-1Penn-UnionPCAA-20BFPCAA-15BFPCAA-10BFPCAA-10BFTE Connectivity – Energy1710521-51710521-31710521-11710521-1Over Armor Rods3/02/01/024Blackburn--PAA10PAA10PAA10Burndy--UC32RUC32RUC32RHubbell (Anderson)LC-83ALC-52CLC-52CLC-52CLC-52CHubbell (Fargo)GA-9843GA-9842GA-9041LGA-9020LGA-9020LMacLean (Reliable)--744AL 600AL600ALPenn-Union--ARC-12ARC-11ARC-14p-2November 2014p – Connectors, Distribution (Parallel Groove)Applicable Specification: ANSI C119.4ACSR to Copper or Copperweld-CopperACSR Size (Bare Conductor)3/02/01/024AFL197R193R193195195BlackburnPAC7PAC7PAC3452CA4CAHubbell (Anderson)LC-811ALC-811ALC-522ALC-511ALC-511Hubbell (Fargo)GA-9040LGA-9040L GA-9020L GA-9002LGA-9003LMacLean (Reliable)600ALC555ALC438ALC438ALC438ALCACSR Size (Over Armor Rods)3/02/01/024AFL201R197R197R197199Blackburn--PAC7PAC7 PAC7Hubbell (Anderson)LC-833LC-833LC-811ALC-811ALC-811Hubbell (Fargo)GA-9843CGA-9842CGA-9040LGA-9020LGA-9020LMacLean (Reliable)--744ALC600ALC 600ALCp-3June 2010p – Connector, DistributionApplicable Specification: ANSI C119.4Copper Type ConductorsConnections to same size or smallerBare ConductorCopperweld Copper2A4A6A8ACopper0x72x3 46(s)Blackburn1/0H1H 2H4H 6H(s)BurndyKS-25KS-23KS-23KS-20KS-17(s)DossertDS-10-FDS-6-FDS-6-FDS-3-FDS-2-F(s)Greaves-A-8-A-5A-3(s)Homac-1F2F4F6FHubbell (Anderson)DG-1/0DG-1 DG-2DG-4DG-6Hubbell (Fargo)GC-5020GC-5002SGC-5002GC-5004GC-5006(s)ILSCOIK-1/0IK-2IK-2IK-4IK-6(s)Kearney/Eaton118109118109 118108118104118102(s)Krueger & HudepohlUC58C-EV----(s)Penn-UnionS1/0S2S3S4S6Richards ManufacturingVC10VC10VC7VC5VC3Royal Switchgear17391739---Over Armor RodsBurndyKVS-31KVS-31KVS-28KVS-26KVS-26Hubbell (Anderson)K-5 K-4K-4 K-2K-2Hubbell (Fargo)GC-5035GC-5035GC-5040GC-5020SGC-5020ILSCOIKB-350IKB-350IKB-4/0--(s)Kearney/Eaton118112118112118111118110118110Penn-UnionVT-4VT-3 VT-3VT-2VT-1(s) Designates split bolt connectorsLong Connectors (Split Bolt)Copper to Copper246Blackburn2H34H36H3BurndyKS-22-3KS-20-3KS-17-3DossertDS5-3DS3-3DS2-3GreavesA-9A-6A-4Homac-4F6FHubbell (Anderson)C-2-LC-4-LC-6-LKearney/Eaton118107118105118103Penn-UnionSEL-2SEL-4SEL-6p-4November 2014p – Connectors, Service (Parallel Groove)Applicable Specification: ANSI C119.4Aluminum-to-AluminumSolid or StrandedNo. 2No. 4AFL490.0490.0BlackburnPAE 2121-9PAE 2121-9BurndyUC25R2RUC25R2RHubbell (Anderson)LC-51ALC-51AHubbell (Fargo)GA-9002LGA-9002LMacLean (Reliable)APG-1APG-1Penn-UnionPCAA-10BFPCAA-10BFp-5July 2009p – Connectors, Service (Parallel Groove)Applicable Specification: ANSI C119.4Aluminum-to-CopperSolid or Stranded2 Al to 4 Cu4 Al to 6 CuBlackburnPAC345PAC345Hubbell (Anderson)LC-511ALC-511AHubbell (Fargo)GA-9002LGA-9002Lp-6June 2010p – Connectors, ServiceApplicable Specification: ANSI C119.4Copper-to-CopperSolid or StrandedManufacturerNo. 4No. 6Blackburn4N6NBurndyKP4CKP6CDossertES-4ES-6Hubbell (Anderson)4E6ESHubbell (Fargo)GC-5004GC-5006IlscoSX-4SX-6Maclean (Reliable)BVC-4BVC-6Penn-UnionSX-4SX-6Richards ManufacturingVC5VC3SouthportSE-3SE-2p-7November 2014p – Connectors, Guy Bond (Parallel Groove) Applicable Specification: ANSI C119.4ACSR to Guy Strand2/01/02 & 4AFL396.6396.6490.0BlackburnPAE 2121-9PAE 2121-9PAE 2121-9BurndyUC 28RUCG25RUCG25RDossertAC103-LWAC101-LWAC100-LWHubbell (Anderson)LC-52A-GPLC-51C-GPLC-51A-GPHubbell (Fargo)GA-9040LGA-9040LGA-9040LMacLean (Reliable)744AL555AL438ALPenn-UnionALC-15ALC-10PCA-010Copper to Guy StrandTE Connectivity – EnergyC-LOK SeriesBlackburnK-12HPW (1/4”)1/0 HPW (3/8”)BurndyUC8W26LC & RCRJC-1DossertUDV 13-1-PGalvan Industries, Inc.K1Hubbell (Anderson)LC-511AHubbell (Fargo)GC-8040PILSCOSK-3 (1/4”)SK-1/0 (3/8”)JoslynJ8300Kearney/Eaton9968-1Krueger & HudepohlUC58B-EVMacLean (Reliable)438ALCPenn-UnionJC-1-AC(1/4”, 3/8” guy strand)(1/0 strand copper max.)p-8July 2009p – Connectors, CompressionApplicable Specification: ANSI C119.4DISTRIBUTIONAluminum toaluminumAluminum tocopperCopper tocopperTap Connections(Al to Al,Al to Cu)BlackburnType WRType WRType CF-1Type WRBurndy“Hycrimp”(Type YH)“Hycrimp”(Type YH)“Crimpit”(Type YC-C)“Cabelok Crimpit”(Type YP-U)Cembre--C-HomacH Tap-OB&DBH Tap-OB&DBCCH Tap-OB&DBHubbell (Anderson)AC SeriesAC SeriesVCUCVCPKearney/Eaton“Squeezeon”(Aluminum)“Squeezeon”(Aluminum)“Squeezeon”(Copper)“Squeezeon”(Aluminum)Penn-Union“Press-On”(Aluminum)“Press-On”(Aluminum)“Press-On”(Copper)“Penn-L-Tap”NOTE: These connectors are acceptable when installed using tools and dies in accordance with the connector manufacturer’s recommendations.p-9July 2009p – Connectors, CompressionApplicable Specification: ANSI C119.4SERVICEAluminum-to-AluminumAluminum-to-CopperCopper-to-CopperBlackburnCS, KLICS-1, IKL (Insulated)-Burndy“Linkits”(Type YSU, YSD)“Insulink”(ES)“Hysplice”(Types YDS-C, YDS-W)Homac“Shure Splicers”-Hubbell (Anderson)VAUSVHSKearney/Eaton“Serv-ens”-National Tel. Supply“Nicopress”-Penn-Union“Penn Sleeves”-These connectors are furnished in a variety of sizes to fit all combinations of aluminum and copper service wire.NOTE: These connectors are acceptable when installed using tools and dies in accordance with the connector manufacturer’s recommendations.p-10November 2014p – Connectors, TransmissionApplicable Specification: ANSI C119.4BOLTED TYPEACSR to ACSRACSR to CopperAFL580 SeriesBurndy (ACSR to ACSR)UP-A, UP-RWhen ordering these clamps specify size, stranding and material of both PRESSION TYPEACSR to ACSRSame SizeConductorSizeAFLBlackburnBurndyHubbell (Anderson)Kearney/Eaton1/05074.438RCJ10YCS25RVPUSOHR-1/0-61AJ2/05074.484RCJ20YCS26R-OHR-2/0-61AJ3/05075.547RCJ30YCS27ROrder OHR-3/0-61AJ4/05075.609RCJ40YCS28RbyOHR-4/0-61AJ266.8 kcmil5076 Order byRCJ266MYCS30RConductorHR-266-267AJ336.4 kcmil5076 strandingRCJ336MYCS33RSizeHR-336-267AJACSR to CopperAFL5070 SeriesBurndyYCR-R-CAHubbell (Anderson)VPUS(Order by conductor sizes)NOTE: These connectors are acceptable when installed using tools and dies in accordance with the connector manufacturer’s recommendations.p-11February 15, 2022p – Connectors(wedge type)ManufacturerAluminum-to-aluminumAluminum-to-copperCopper-to-copperTap Connections(Al to Al ,Al to Cu)AFLWedge TapWedge Tap-Wedge TapTE Connectivity – EnergyAMPACTMINIWEDGEAMPACTMINIWEDGEAMPACTC-LOK SeriesAMPACTMINIWEDGEBurndyWEJTAPWEJTAPWEJTAPWEJTAPConnector Products, Inc.Aluminum Tap ConnectorAluminum Tap Connector-Aluminum Tap ConnectorHomacPower TapPower Tap-Power TapRichards Manufacturing Co.ABWC seriesABWC series-ABWC seriesConditional Listp(1)October 23, 2020p – ConnectorsManufacturerConditionsBlackburnBolted, insulatedIPC 1102 (#2-1/0 run, #2 tap)IPC 4111 (1/0-4/0 run, #2-1/0 tap)IPC 4141 (1/0-4/0 run, 1/0-4/0 tap)1. For use on 600 volt maximum insulated conductors.2. To be used only for connecting service drop conductors to service entrance conductors.3. To obtain experience.Homac*Compression, Insulated“Shure Splicers”Types Q1N and U1NTo obtain experience.Hubbell (Anderson)*Compression al to alal to cu “Versa-Crimp” L tap.Parallel groove, aluminumLC-52C (1/0 – 6/1 ACSR over armor rods)LC-51C (1/0 – 6/1 ACSR)To obtain experience.To obtain experience.KuplerBolted, insulated130001 (#2-1/0 run, #2 tap)130003 (1/0-4/0 run, #2-1/0 tap)130004 (1/0-4/0 run, 1/0-4/0 tap)1. For use on 600 volt maximum insulated conductors.2. To be used only for connecting service drop conductors to service entrance conductors.3. To obtain experience.Penn Union*Compression, InsulatedType PIKTo obtain experience.TE Connectivity (Raychem)Insulated service compression connector, TIL SeriesTo Obtain Experience.UtilcoTwo bolt style, al to alType PMTo obtain experience.*NOTE: These connectors are acceptable when installed with tools and dies in accordance with the connector manufacturer’s recommendations.q-1November 2011q – Bolt, double upsetApplicable Specification: “RUS Specifications for Single and Double Upset Spool Bolts,” D-5Diameter, inches:5/85/85/85/8Length, inches:78910ManufacturerAllied Bolt, Inc.--17161717Hubbell (Chance)-782678287830Joslyn-J2394J2395J2396KortickK4760K4761K4762K4763MacLean (Continental)U31065U31067U31069U31071s-1July 2009s – Clevis, secondary swingingApplicable Specifications: “RUS Specifications for Secondary Swinging Clevises,” D-6ManufacturerClevis only*Clevis with 1-3/4” groove spoolClevis with 3” groove spoolHubbell (Chance)03520352-C909-10320352-C909-1034JoslynJ0322--KortickK9259K9109K9149MacLean (Continental)U32043U36043U32143*Catalog Number does not include spool. See page cm for spool type insulators.u-1December 13, 2023u – Deadend for galvanized steel oraluminum-clad steel guy strand3-Bolt Guy ClampLight (1/2” bolts)Heavy (5/8” bolts)*Almat-K162-4Allied Bolt, Inc.50595056Hubbell (Chance)64506461JoslynJ930J931Kortick K4124K4005MacLean (Continental)U5273U5275U-Bolt Guy ClampLight (3/8” bolts)Heavy (1/2” bolts)Hubbell (Chance)GCU38C-Joslyn (Flagg)PAX-64CPAX-67CMacLean (Continental)GC-64CGC-67COffset Guy ClampLight (1/2” bolts)Heavy (5/8” bolts)Hubbell (Chance)64096410JoslynJ926J927*For use on transmission.u-2August 2014u – Deadend for galvanized steel guy strandStrand Size:?9/32”5/16”3/8”7/16”AutomaticAluma-FormAGD-250AGDU-250-AGD-312AGDU-312AGD-375AGDU-375AGD-437MacLean (Reliable)Bail for thimble eyeBail for guy insulator5100515052015251520152515102515251035153Formed TypeAFLFor standard guy*GYDEGB061GYDEGB071GYDEGB079GYDEGB091GYDEGB110DulmisonFor standard guy*SGG-0610SGG-710SGG-0790SGG-0915SGG-1105Florida Wire & CableFor standard guy*FLA 1300FLA 1400FLA 1500FLA 1600FLA 1700Helical Line ProductsFor standard guy*HG-207-1/4”HG-208-9/32”HG-209-5/16”HG-210-3/8”HG-211-7/16”Payer IndustriesFor standard guy*25-GNBS-30-GNBS35-GNBS38-GNBSPreformed Line ProductsFor standard guy*For wrapped guyGDE-1104WGL-2100GDE-1105WGL-2101GDE-1106WGL-2102GDE-1107WGL-2103GDE-1108WGL-2104*Class B galvanizing. When guy wire has Class C galvanizing, formed deadend should also have Class C galvanizing.u-3August 2014u – Deadend for aluminum clad steel guy strandStrand Size3#10(4M)7#12(6M)7#11(8M)7#10(10M)7X.110”(11.5M)7#9(12.5M)7X.121”(14M)7#8(16M)7X.148”(20M)Formed TypeAluminum-Clad Steel Guy StrandAFLFor standard guyGYDEAW055GYDEAW060GYDEAW068GYDEAW077GYDEAW082GYDEAW087GYDEAW090GYDEAW096GYDEAW112DulmisonFor standard guyAWGG 0555AWGG 0600AWGG 0685AWGG 0770AWGG 0825AWGG 0870AWGG 0905AWGG 0965AWGG1125Helical Line ProductsFor standard guy-HG517-6MHG519-8MHG521-10M-HG523-12.5MHG524-14MHG525-16MHG528-20MHubbell (Chance)For standard guy-6M-AWTLG8M-AWTLG10M-AWTLG-12.5M-AWTLG---Preformed Line ProductsFor standard guyAWDE-4108AWDE-4110AWDE-4113AWDE-4116AWDE-4118AWDE-4119AWDE-4120AWDE-4122AWDE-4126For wrapped guy-WGL-4110WGL-4113WGL-4116-WGL-4120---AutomaticAluminum-Clad Steel Guy StrandHubbell (Fargo)-GDE-300GDE-301GDE-301-GDE-302---MacLean (Reliable)-520052015201-5202---v-1September 2010v – Guy Attachmentfor 5/8” boltType:Formed StrapAngle Bolt EyeGuy HookGuy Hook*Maximum WorkingLoad Rating23,130 N (5200 lbs.)23,130 N(5200 lbs.)23,130 N(5200 lbs.)37,800 N(8500 lbs.)EatonHubbell (Chance)50040100-GH5JoslynJ25164J6500J6555J6556-Joslyn (Flagg)---P151XKortickK4035K4047K3140--Line Hardware---HGA-58CMacLean (Bethea)---AG-5MacLean (Continental)U31030U5531GADGAD-56-4Power Play Products---B58GHM.D. Henry Company, Inc.---UGA-56C*This hook may be used in place of the wrapped guy arrangement in assemblies E3-2 and E3-3.v-2April 2013Pole Eye Plates(5/8” Bolt)TypePole Eye PlateMaximum WorkingLoad Rating37,800 N.(8500 lbs.)Hubbell (Anderson)GSP-05Line HardwarePGA-548MacLean (Bethea)PE5-6AMacLean (Continental) PEP-66-45Conditional Listv(1)July 2009v – Guy attachmentManufacturerConditionsMacLean (Continental)Pole Band, UCB-15ETo obtain experience.For distribution lines only and 10,000 lbs maximum loading.Hubbell (Chance)Pole Band, with cone head bolt 6280, and guy clip 4566276 (for 6” to 10” pole)6277 (for 8” to 14” pole)To obtain experience.For distribution lines only and 10,000 lbs maximum loading.JoslynPole Band, with cone head bolt J-6281, and guy clip J-6275J-6280 (for 6” to 10” pole)J-6270 (for 8” to 14” pole)To obtain experience.For distribution lines only and 10,000 lbs maximum loading.w-1September 2019w – Insulators, guy strain(Fiber Reinforced Plastic)Ult. Strength, lbs.11,00015,00021,000Aluma-Form, Inc.-FGS 16 SeriesFGS 21 SeriesDulmison II1-1P Series HSI-2X SeriesHSI3-2P Series GAMMA CORONA-GS15 SeriesGS21 SeriesEPACCC SeriesCC SeriesCC SeriesGamma Insulators Corp.-GS15 Series-Hubbell (Chance)-GS-16GS-21Hughes Brothers-692 Series694 SeriesJoslyn (Flagg)150 Series150 Series210 SeriesK-Line--KL SeriesMacLean (Continental)G-11 SeriesG-15 SeriesG-21 SeriesGAC 11 Series(for 5/16” guy strand)GAC 15 Series(for 3/8” guy strand)-Preformed Line Products-GSF16 SeriesGSF21 Seriesx-1May 10, 2024x – Rod, anchorApplicable Specification: ANSI C135.2, “Standards for Galvanized Ferrous Strand Eye Anchor Rods”Applicable Sizes:Single guy: 5/8 inch diam. 6, 7 and 8 ?t long3/4 inch diam. 8, 9 and 10 feet long1 inch diam. 9 and 10 feet longDouble guy: 5/8 inch diam. 7 and 8 f? long 3/4 inch diam. 8, 9 and 10 feet long 1 inch diam. 9 and 10 feet longSingle Guy: Drive: 5/8 inch diam. 7 and 8 ?t long3/4 inch diam. 8, 9 and 10 feet long1 inch diam. 9 and 10 feet longDouble Guy: Drive: 5/8 inch diam. 7 and 8 ?t long3/4 inch diam. 8, 9 and 10 feet long1 inch diam. 9 and 10 feet longThe following manufacturers have shown compliance with the applicable specifications. Some manufacturers cannot supply all sizes listed above. Check with manufacturer or distributor for availability.Allied Bolt, Inc.DixieEritech (Carolina Galvanizing/Knight)Grip-TiteHubbell (Chance)JoslynKortickUtilities ServiceConditional Listx(1)July 2009x – Rod, anchorApplicable Specification: ANSI C135.2 “Standards for Galvanized Ferrous Strand Eye Anchor Rods” except rods are copper covered. Copper coating thickness is 13 mils minimum at any point and a 15 mil average. All purchases should specify that a factory certification to the thickness of the copper must accompany the shipment of the rods.Applicable Sizes: Dou? Guy – 3/4 inch diameter, 8 and 9 feet long.ManufacturerConditionsJoslyn1. To obtain experience.2. For transmission purposes only.3. For use with log anchors or copper covered plate anchors only.4. To be used with copper coated hardware or bronze hardware underground.Conditional Listx(2)July 2012x – Rod, anchorApplicable Specification: ANSI C135.2 “Standards for Galvanized Ferrous Strand Eye Anchor Rods” except rods are copper covered. Rods meet UL-465 specification for copper coating thickness of 10 mils minimum at any point. All purchases should specify that a factory certification to the thickness of the copper must accompany the shipment of the rods.Applicable Sizes: Double Guy – 3/4 inch diameter, 8 and 9 feet long.ManufacturerConditionsy-1December 2015y – Galvanized Steel StrandUsage: Guy, Distribution or Transmission LineOverhead Static WireASTM Specification: A 475 – For Guy Strand A 363 – For Overhead Static WireFollowing grades/diameters of steel wire strands are preferred sizes:For GuyingSiemens-MartinHigh StrengthExtra High Strength GradeDistribution LineDist. Or Trans.DistributionTransmission?” dia.?” dia.?” dia.?” dia.-9/32”9/32”9/32”-5/16”5/16”5/16”3/8”3/8”3/8”3/8”7/16”7/16”7/16”For Overhead Static Wire (Groundwire)High Strength (dia.)Extra High Strength Grade (dia.)-5/16” 3/8”3/8”7/16”7/16”Alcan CableArmco Steel CorporationBekaert Steel Wire CorporationCal-WireCentral de Herramientes, S.A. de C.V.Conex Cable, LLCDavis-WalkerDeAcero, S.A. de C.V.EmcocablesFlorida Wire and CableGuardian Cable Systems, LLCIndiana Steel and WireKnight IndustriesMitchell IndustriesNational Strand ProductsPaulsen Wire and Rope CorporationSeal Wire CompanySouthwireNote: The buyer should specify Class A, B, or C coating per ASTM A363 or A475.y-2November 2014y – Steel StrandAluminum-CladSpecifications: ASTM B415 and B416For overhead groundwire(Joint and splice requirements for wire and strand to meet ASTM A363)AWG Sizes: (a) 7 No. 10, (c) 7 No. 9, (d) 7 No. 8, (e) 7 No. 7 Emcocables(a), (c), (d), (e)Intral and Company, Ltd.(a), (c), (d), –e)Nehri–g - Conex(a), (c), (d), (e)AFL(a), (c), (d), (e)For guy strand(M is rated breaking load in thousand lbs)M Sizes: 6M (7 No. 12), 8M (7 No. 11), 10M (7 No. 10), 11.5M (7 x .110"), 12.5M (7 No. 9), 14M (7 x .121"), 16M (7 No. 8), 18M (7 x .139"), 20M (7 x .148")Alumoclad de Mexico, S.A. de C.V.8M, 10M, 16MEmcocables6M, 8M,10M, 12.5M, 16M, 18M, 20MIntral and Company, Ltd.6M, 8M,10M, 12.5M, 16M, 18M, –0MNehri–g - Conex8M, 10M, 12.5M, 16M, 18MAFL 6M, 8M, 10M, 12.5M, 14M, 16M, 18M, 20MConditional Listy(1)July 2009y – Aluminum Coated Steel WireApplicable Specification ASTM A474National Strand Products, 3/8"Distribution Guy StrandSiemens-MartinHigh StrengthExtra High StrengthTransmission Guy StrandHigh StrengthExtra High StrengthOverhead Static WireHigh StrengthExtra High StrengthTo obtain experience.To obtain experience.1. To obtain experience.2. Must meet the joint requirements of ASTM A363. Conditional Listy(2)November 2018y - Zinc - 5% Aluminum - Mischmetal alloy (Zn-5Al-MM) - CoatedSteel Wire StrandsApplicable Specification ASTM A855Bekaert CorporationType/Grade:Nominal diameter (7-wire strand) in.(S-M):1/4", 3/8", & 7/16".(HS):1/4", 5/16", 3/8", & 7/16", 9/32”.(EHS):1/4", 5/16", 3/8", & 7/16", 9/32”.ConditionsDistribution Guy StrandSiemens-Martin (S-M)High Strength (HS)Extra High Strength (EHS)Transmission Guy StrandHigh Strength (HS)Extra High Strength (EHS)Overhead Static WireHigh Strength (HS)Extra High Strength (EHS) To obtain experience.To obtain experience.1. To obtain experience.2. Must meet the joint requirements of ASTM A363.NOTE: Only available with Class A coating.Type/Grade:Nominal diameter (7-wire strand), in.(S-M):1/4", 3/8", & 7/16".(HS):1/4", 9/32", 5/16", 3/8", & 7/16".(EHS):1/4", 9/32", 5/16", 3/8", & 7/16".Indiana Steel & Wire Co.Guardian Cable Systems, LLCConditionsDistribution Guy StrandSiemens-Martin (S-M)High Strength (HS)Extra High Strength (EHS)Transmission Guy StrandHigh Strength (HS)Extra High Strength (EHS)Overhead Static WireHigh Strength (HS)Extra High Strength (EHS) To obtain experience.To obtain experience.1. To obtain experience.2. Must meet the joint requirements of ASTM A363.NOTE: The buyer should specify Class A, B, or C coating.Conditional Listy(3)November 2018y - Conzinal 95% Zinc - 5% Aluminum+ Mischmetal Alloy (AL-ZN-MM) Coated Steel Wire StrandsApplicable Specifications:ASTM A363, A475, A855/A855M, A925ASTM B498, B802/B802M, B803/B803M, B958/B958MConex Cable LLCType/Grade:Nominal diameter (7-wire strand) in.(EHS):1/4", 5/16", 3/8", & 7/16".ConditionsDistribution Guy StrandExtra High Strength (EHS)Transmission Guy StrandExtra High Strength (EHS)Overhead Static WireExtra High Strength (EHS) To obtain experience.To obtain experience.To obtain experience.z-1March 2013z - Anchors, Expanding and PlateDISTRIBUTIONDesignated Maximum holding power-lbs.6,0008,00010,00012,000Min. Area (sq. in.)90100120135Rod Dia. (inch??5/8??Rod Length (feet)778-TypeGrip-Tite8 wayA322812GA322812GA322812GA322812GHubbell (Chance)8 way88135881358813588135MacLean Power Systems8 way-J8115J8135J8135Line Hardware8 way8-100G8-115G8-135G8-135GNOTE: Where galvanized anchors are listed, the same anchors ungalvanized (black asphalt coated) are also acceptable.z-2March 2013z - Anchors, plateApplicable Specification "RUS Specification for Steel Plate Anchors," T-3TRANSMISSIONMinimum Area 400 sq. in.?” Galv. RodsGrip-Tite XP24 - 3/4 - G Hubbell (Chance)X24 - 3/4MacLean Power SystemsJ3524 - 3/4Line HardwareCP-24GNOTE: Where galvanized anchors are listed, the same anchors ungalvanized (black asphalt coated) are also acceptable.z-3December 2015z - Anchors, ServiceDesignated Maximum Holding Power in Sand - 2500 lbs. ScrewExpandingEritech (Carolina Galvanizing)86346606-Grip-Tite-322065GHubbell (Chance)63466870MacLean Power SystemsJ6526W-CAJO870Line Hardware-8-70Gz - Anchors, SwampDISTRIBUTION10" dia.12" dia.15" dia.MacLean Power SystemsD-6710-SD-6713-SD-6715-SForesight-MR-SR*-Hubbell (Chance)C1101169C1101170C1101171*Drive type anchor. Surface area meets or exceeds that of 12" diameter anchors.NOTE: Where galvanized anchors are listed, the same anchors ungalvanized (black asphalt coated) are also acceptable.z-4March 2013z - Anchors, RockAnchor Size - inches1-3/41-3/41-3/41-3/4Rod Length - inches15305318Rod Diameter - inches3/43/43/41AlmatK148-15K148-30K148-53-Hubbell (Chance)R315R330R353-MacLean Power SystemsJ3436J3437J3438-KortickK5503K5504K5505K2377z - Pole keysHubbell (Chance)P-4817MacLean Power SystemsJ-4817z-5March 2013z - Anchors, Power-installed screwManufacturer:Earth Contact ProductsMulti-Helix Screw AnchorsWorking Load CategoriesSoil Type35,600 N53,400 N71,000 N89,000 N(8,000 lb.)(12,000 lb.)(16,000 lb.)(20,000 lb.)A1 (Soil Class 2)TAF-150-36TAF-150-66TAF-150-66TAF-150-66A2 (Soil Class 3)TAF-150-36TAF-150-66TAF-150-66TAF-150-66B (Soil Classes 4 & 5)TAF-150-36TAF-150-66TAF-150-66TAF-150-66C (Soil Classes 6 & 7)TAF-150-36TAF-150-66TAF-150-66TAF-150-66Manufacturer:MacLean Power SystemsMulti-Helix Screw AnchorsWorking?Load?CategoriesSoil Type35,600 N53,400?N71,000?N89,000?N(8,000 lb.)(12,000?lb.)(16,000?lb.)(20,000?lb.)A1 (Soil Class 2)D-6632D-6632D-6636D-6636D-6636D-6636D-6637D-6637D-6637D-6637D-6638D-6638A2 (Soil Class?3)D-6632D-6632D-6636D-6637D-6636D-6636D-6637D-6638D-6637D-6637D-6638B (Soil Classes 4?&?5)D-6632D-6636D-6636D-6638D-6636D-6637D-6637D-6637D-6638C (Soil Classes 6?&?7)D-6636D-6637D-6638D-6637NOTES: See RUS Specification T-10 for definitions and explanations.Anchors in the 53,400 N (12,000 lb.) category or above for use on wood poles must be used with hardware commensurate with the working load. Hardware may provide for either single or multiple guy attachments to anchor.Anchors listed in a specific working load category and/or soil class may generally be used at lower working load categories and/or lower numerical soil classes.z-5.1March 27, 2023z - Anchors, Power-installed screwManufacturer:Hubbell (A. B. Chance Company)“SS” Multi Helix AnchorsWorking Load CategoriesSoil Type35,600 N53,400 N71,000 N89,000 N(8,000 lb.)(12,000 lb.)(16,000 lb.)(20,000 lb.)A1 (Soil Class 2)012642AE012642AE012642AEJ012642AEJ012642AEJ012642AEJ012642EJN012642EJN012642EJN012642EJN012642EJNS012642ENJNSA2 (Soil Class 3)012642AE012642AE012642AEJ012642EJN012642AEJ012642AEJ012642EJN012642EJNS012642EJN012642EJN012642EJNSB (Soil Classes 4 & 5)012642AE012642AEJ012642AEJ012642EJNS012642AEJ012642EJN012642EJN012642EJN012642EJNSC (Soil Classes 6 & 7)012642AEJ012642EJN012642EJNS012642EJNNOTES: See RUS Specification T-10 for definitions and explanations.Anchors in the 53,400 N (12,000 lb.) category or above for use on wood poles must be used with hardware commensurate with the working load. Hardware may provide for either single or multiple guy attachments to anchor.Anchors listed in a specific working load category and/or soil class may generally be used at lower working load categories and/or lower numerical soil classes.z-5.2May 10, 2024z - Anchors, Power-installed screwManufacturer:Grip-Tite Manufacturing Co.Working Load CategoriesSoil Type35,600 N53,400 N71,000 N89,000 N(8,000 lb.)(12,000 lb.)(16,000 lb.)(20,000 lb.)A1 (Soil Class 2)G66327G66327G66367G66367G66347G66347G66377G66377G66367G66367G66377G66377A2 (Soil Class 3)G66327G66327G66367G66377G66347G66347G66377G66367G66367G66377G66377B (Soil Classes 4 & 5)G66327G66367G66347G66377G66367G66377G134-6C (Soil Classes 6 & 7)G66367G66377G66377NOTES: See RUS Specification T-10 for definitions and explanations.Anchors in the 53,400 N (12,000 lb.) category or above for use on wood poles must be used with hardware commensurate with the working load. Hardware may provide for either single or multiple guy attachments to anchor.Anchors listed in a specific working load category and/or soil class may generally be used at lower working load categories and/or lower numerical soil classes.z-6May 10, 2024z - Anchors, Power-Installed Screw, DistributionManufacturerCatalog NumberRating (lbs.)Hubbell (Chance)C102500610,000C102500710,000C102501010,000C10252078,000C10252108,000Grip-TiteGHD250-11410,000GHD250-13410,000GHD225-1128,000GHD225-1348,000G112-66,000Conditional Listz(2)March 2020z - Anchors, plateManufacturerCatalog #ConditionsWatson Anchor*W16B18775W16B18710W20B18710W20B25010W24B18710W24B25010W30B50012W36B62515To obtain experience.NOTES:*Watson cap nut and anchor rod should be used. Consult manufacturer for proper pairing.Conditional Listz(5)May 2019z – Anchors, screw, power installedManufacturerConditionsBathurstBMS-003 (6,000 lbs.)BMS-003R (5/8” rod)BMS-004 (10,000 lbs.)BMS-004R (3/4” rod)To obtain experience.Cantsink1.5RCS SeriesTo obtain experience.Earth Contact ProductsTAPL-625-10-12 (6,000 lb., 5/8” rod)TAPL-100-10-14 (10,000 lb., 1” rod)ForesightMR-1, MR-2, MR-3, MR-4To obtain experience.Each installation must be proof tested. Maximum rating is test value achieved. Hubbell (Chance)024462 (6,000 and 8,000 lb.) 12332P (5/8” rod) 12587 (5/8” thimble eye nut)024484 (10,000 and 12,000 lb.)12632P (3/4” rod)6512 (3/4” thimble eye nut)To obtain experience.MacLean Power SystemsJ1lB-CA (6,000 & 8,000 lb., 5/8" rod)J13C-CA (10,000 & 12,000 lb., ?” rod)To obtain experience.Oklahoma Design Technologies, LLCSTAD Series To obtain experience.CSTAD SeriesNOTES: Where galvanized anchors are listed, the same anchors ungalvanized (coated) are also acceptable.Catalog numbers shown for screw anchors are for anchors with 1-3/8" hubs. Equivalent anchors with 1-1/2" hubs are also acceptable. (A special installing wrench is required.)aa, abDecember 13, 2023aa – Nut, eyeb - Nut, thimble eyeaaabOval eye nut5/8”Oval eye nut3/4”ThimbleEyeletThimble eye nut5/8”Thimble eye nut3/4”Allied Bolt, Inc.58765877205050505051Berny's Forging Co.OE1----Dixie---D6510-Hubbell (Chance)6502-B14A6510-HughesEN60----JoslynJ1092-J1126J6510-KortickK4212J1093K4413K3111-Line HardwareOEN-58-BEL-58--MacLean (Continental)EN-5-BE-5TN-5-ac-1July 2009ac - Brace, sidearm diagonal1-1/2 inch angle1-3/4 inch angle3/16" x 5'3/16" x 7'Hubbell (Chance)-6984Joslyn-J1525KortickK1951K1954MacLean (Continental)U5210U5212ae-1November 6, 2020ae – Surge (lightning) Arrester, Distribution ClassSiC TypeManufacturerTypeRatings, kVHousingDutyGeneral Electric Alugard9, 10, 18PorcelainHeavyMOV TypeManufacturerTypeRatings, kVHousingDutyCelecoPSAMOV-HDDC9-27PolymerHeavyHSCEL9-27PolymerHeavyRPCEL9-27PolymerRiser PoleEatonAZL VariSTAR9-27PorcelainHeavyTE ConnectivityHDA Series9-27PolymerNormalDAH Series9-27PolymerHeavyAluma-Form, Inc.AHD ARP3-273-27Polymer PolymerHeavy Riser Poleae-2July 2009ae - Surge (Lightning) Arresters, Substation*SiC TypeManufacturerTypeAcceptedRatings - kVHousingManufacturer'sClassificationGeneral ElectricAlugard3, 9, 10, 18PorcelainDistributionMOV TypeManufacturerTypeAcceptedRatings - kVHousingManufacturer'sClassificationHubbell Power Systems (Ohio Brass)DynaVarVLA3-27PorcelainStationVL3-48PorcelainStationVN54-312PorcelainStation* For instructions concerning application at substations, refer to RUS Bulletin 1724E-300, "Guide for the Design of Substations for Electric Borrowers." In the purchase of arresters, care should be taken to select the type and voltage ratings in accordance with the line voltage and the type of construction (grounded or ungrounded).Conditional Listae(1)March 2013ae - Surge (Lightning) Arresters, Distribution ClassCONDITION OF ACCEPTANCE: To Obtain ExperienceMOV TypeManufacturerTypeRatings, kVHousingDutyABBPolim-D9,10,18PolymerHeavyEatonAZS VariSTAR9,10,18,27PorcelainNormalUNS Ultra Sil Housed VariSTAR9,10,18,27PolymerNormalUHS Ultra Sil Housed VariSTAR9,10,18,27PolymerHeavyGeneral ElectricTranquell, 9L23 Series9,10,18,27PolymerHeavyHubbell Power Systems (Ohio Brass)DynaVar PDV-659,10,18,27PolymerNormalPDV-100 Optima9,10,18,27PolymerHeavyJoslynZNP9,10,18,27PolymerNormalZHP9,10,18,27PolymerHeavyMOV Type (Internally Gapped)ManufacturerTypeRatings, kVHousingDutyEatonURT Evolution9,10,18,27PolymerHeavyConditional Listae(2)March 2016ae – Surge Arrester, Substation*CONDITION OF ACCEPTANCE: To Obtain ExperienceMOV TypeManufacturerTypeAcceptedRatings – kVHousingManufacturer’sClassificationABBXPI-III9, 10, 18, 27PolymerIntermediateXPS9, 10, 18, 27PolymerStationEXLIM-R9, 10, 18, 27PorcelainStationEXLIM-Q9, 10, 18, 27PorcelainStationEatonVariSTAR3-312PorcelainStationVariSTAR AZF3-120PorcelainIntermediateVariSTAR UI3-108PolymerIntermediate – 3.9 kJ/kV(1)VariSTAR US3-108PolymerStation – 3.4 kJ/kVVariSTAR US3-108PolymerStation – 3.9 kJ/kV(1)VariSTAR US120-240PolymerStation – 6.2 kJ/kV(1)VariSTAR UH3-108PolymerStation – 5.6 kJ/kVVariSTAR UH3-108PolymerStation – 6.2 kJ/kV(1)VariSTAR UH120-240PolymerStation – 10 kJ/kV(1)VariSTAR UX3-108PolymerStation – 10 kJ/kV(1)VariSTAR UXL3-360 kVPolymerStation – 15 kJ/kV(2)General ElectricTranquell2.7-612PorcelainStationTranquell3-120PorcelainIntermediateHubbell Power Systems (Ohio Brass)PVI-LP3-72PolymerIntermediatePVIA3-72PolymerIntermediatePVI3-144PolymerIntermediateEVP3-288PolymerStationSVN54-444PolymerStationMVN54-444PorcelainStationJoslynType ZS3-240PorcelainStationType ZSH258-468PorcelainStationType ZIP3-120PolymerIntermediateType ZSP3-144PolymerStationMagneTekZSE-E2A3-39PorcelainStationZSE-E3A45-312PorcelainStationSiemens Power3EQ136-240PolymerStation3EQ496-444PolymerStation3EP212-384PorcelainStation3EP412-150PorcelainStationTE ConnectivityPBA3-192PolymerIntermediate*For instructions concerning application at substations refer to RUS Bulletin 1724E-300, "Design Guide for Rural Substations." In the purchase of arresters, care should be taken to select the type and voltage rating in accordance with the line voltage and the type of construction (grounded or ungrounded).(1) Energy ratings based on single impulse ratings.(2) Meets Class H energy levels per IEEE Std C62.11?-2012 standard.af-1September 2019af – Cutouts, Distribution, OpenManufacturerTypeVoltage RatingABBICX15, 27 kVLBU-II15, 27 kVAdvanced Rubber ProductsLCNL-15 – polymer (load break)15 kVLCNL-27 – polymer (load break)27 kVLCNL-36 – polymer (load break)36 kVCSNL-15 – polymer15 kVCSNL-27 – polymer27 kVCSNL-36 – polymer36 kVAluma-Form, Inc.CPG-15 (porcelain)15 kVCPG-27 (porcelain)27 kVCSG-15 (polymer)15 kVCSG-27 (polymer)27 kVEatonS115, 27 kVL (porcelain)15, 27 kVL (polymer)15, 27 kVHubbell (Chance)C15, 27, 35 kVC (load break)15, 27, 35 kVC-Polymer15, 27 kVC-Polymer (Load break)15, 27 kVKearney/EatonHX15, 27 kVPeak Demand Inc.FCP series15, 27, 36kVPower Line HardwareDHC15, 27 kVSIL (polymer)15, 27 kVMacLean Power SystemsXS-Polymer15, 27 kVSouthern StatesSeries 6615, 27 kVSeries 7015 kVUnited Copper IndustriesAPD151610011015 kVAPD271210012527 kVNOTE: The buyer should specify the load rating, voltage rating, interrupting rating and required accessories. Cutouts used on underground riser poles should be load break type or have hooks for portable load interrupters.af-1.1December 5, 2023af – Cutouts, Distribution, OpenManufacturerTypeVoltage RatingIUSAC (porcelain)15, 27 kVC (polymer)15, 27 kVNOTE: The buyer should specify the load rating, voltage rating, interrupting rating and required accessories. Cutouts used on underground riser poles should be load break type or have hooks for portable load interrupters.af-2September 2012af - Cutout, open-link fuse supportManufacturerMounting12.5/7.2 kV50 amp.24.9/14.4 kV50 amp.EatonCrossarmFT1A2FT1A4BushingFT10A3-Kearney/EatonCrossarm6484-55-Bushing6483-59-NOTE: The open link fuse supports listed above are fuse supports only and have no inherent interrupting capacity. They should be used with fuse links capable of interrupting at least 1200 amperes and for transformer protection only.af-3 July 2009af - Power Fuses, SubstationManufacturerTypeVoltage Rating (kV)EatonCMU (Boric acid, non-refillable)15-34.5Eaton (Cutler-Hammer)RDB (Boric acid, refillable)15-34.5DBA (Boric acid, non-refillable)46-69DBU (Boric acid, non-refillable)15-34.5Kearney/EatonHX15HX27S & C Electric*SMD (Boric Acid)15-138Southern StatesSeries P15-161*Available with porcelain insulators. “Available with "Cypoxy" cycloaliphatic epoxy insulators 34.5 kV on request.NOTE:All fuses listed on this page should be furnished with NEMA standard insulators. The buyer should specify the current rating, voltage rating, interrupting rating and required accessories.Conditional Listaf(1)September 2019af - Cutouts, Distribution, OpenManufacturerTypeVoltageRatingConditionsPeak Demand Inc.FCS series (polymer)15, 27, 36kVTo obtain experience.Conditional Listaf(1.1)July 2018af - Cutouts, Distribution, Openwith Linkbreak AttachmentManufacturerTypeVoltageRatingConditionsHubbell C15, 27 kV1. To obtain experience.2. Limited to 100 amp cutouts.3. To be used only with Hubbell (Chance), Eaton and Kearney fuses. Will not break S&C and some other fuse types.C-Polymer15, 27, 35kV1. To obtain experience.2. Limited to 100 amp cutouts.3. To be used only with Hubbell (Chance), Eaton and Kearney fuses. Will not break S&C and some other fuse types.Conditional Listag(1)July 2009ag - Fuses, Current Limiting, BackupManufacturerConditionsABB15 kV ClassType CLTX, 25K/15T25 kV ClassType CLTX, 25K/15T1. To obtain experience.2. Must be used in series with external expulsion fuse 25K OR 15T or smaller or with CSP transformers 50 kVA or smaller.Eaton15 kV Class FAH series25 kV Class FAH seriesSame as above.General Electric15 kV Class 9F59U Series25 kV Class 9F59USame as above.High-Tech Fuses15 kV Class No. HTDE23 (X)02525 kV Class No. HTDE24 (X)02535 kV Class No. HTDE25 (X)025Same as above.Hubbell (Chance)15 kV ClassType K-Mate 25 Catalog No. C70L-31KA25 kV ClassType K-Mate 25 Catalog No. C70L-32KASame as above.ah-1July 2017ah - Tie, insulator, formed typeAFLDTF "Dist. F Neck Tie w/Pad" (Order for specific conductor size and insulator)DBST "Double Side Tie w/Pad" (Order for specific conductor size and insulator)SPL “Spool Tie for ACSR* (Side tie for use on spool insulator with 1-3/4" Neck)DSTCF “Double support Tie (Order for specific conductor size and insulator)STF “Side Tie w/pad” (Order for specific conductor size and insulator)LTF “Longspan Tie w/pad” (Order for specific conductor size and insulator)DulmisonLT "Longspan" top tie (Order for specific conductor size and insulator)ST side tie (Order for specific conductor size and insulator) Type SPL* (Side tie for use on spool insulator with 1-3/4" groove)DBST double side tie (Order for specific conductor size and insulator)DST double support tie (Order for specific conductor size and insulator) Helical Line ProductsHTT Series (Order for specific conductor size and insulator)Hubbell (Chance)Super Top-Tie, Type STT for single or double support use, with insulators 2-1/”" through 3-1/2" neck diameter and single support use on spool insulators with 1-3/4" groove diameter (Order for specific conductor size.)Preformed Line ProductsAlloy Side, Spool and Top TiesEZ-WRAP* spool tie (order for specific conductor size)EZ-WRAP Side Ties, EZST-seriesEZ-WRAP Twin Ties, TT-seriesWT "Wraplock" (Order for specific conductor size an“ insulator)S” "Groove-Formed" side tie (Order for specific conductor size and insulator)Spool Tie for ACSR, Type SPL* (Side tie for use on spool insulator with 1-3/4" groove)DST double support top tie (Order for specific conductor size and insulator)DBST double side tie (Order for specific conductor size and insulator) UT-series Distribution Tie*Not for side mounting on pin or post insulators.Conditional Listah(1)April 2017ah - Tie, insulator, formed typeManufacturerConditionsDulmisonType QSPL “Quick Spool” spool tie (Order for specific conductor size)To obtain experience.ai-1June 2015ai - Rods, Ground, 13-milApplicable Size:The standard length is 8 feet and catalog numbers listed below are for this length. Longer rods may be required for special conditions.Copper-covered ground rods are listed with a 13-mil minimum at any point and a 15-mil average covering of copper. All purchases should specify that a factory certification of the thickness of the copper must accompany the shipment of the rods.Copper-covered5/8"3/4"AlumocladAL- 588-Blackburn625813MX-BoggsEB-810-13-Erico615883-Galvan Industries, Inc.6258G137508G13Harger588RUSJoslynJ8338-13-KornsKCG588-13-Republic WireRGC5883-South Atlantic, LLC (Southern Grounding)C58813C34813WilcorWA588C-ai-2June 2015ai - Rods, GroundApplicable Size:The standard length is 8 feet and catalog numbers listed below are for this length. Longer rods may be required for special conditions.Hot Dip Galvanized SteelManufacturer5/8" 3/4"Blackburn-GR7508BoggsG588G348PTG588**PTG348**DixieD8578D8618Erico815880813480815889**813489**Galvan Industries, Inc.GR6258FGR6258FP**GR7508FGR7508FP**Grip-TiteGT588GT348Hubbell (Chance)85788618C203-0107**-C203-0377*-JoslynJ5328J5338KornsKG58KG34KortickK4658K4678Line HardwareGR-588GGR-348GLloyd6258H7508HMacLean (Continental)U5307U6338Porcelain Products73387348South Atlantic, LLC (Southern Grounding)ZZ588Z348WilcorWA8580GWA8340GElectro-Galvanized SteelApacheG588G348G588PT**G348PT**BlackburnGR6258-CalpicoG8580-LMP 6258E**7508E**Stainless SteelErico685880683480Galvan Industries, Inc.S6258S7508Harger588SS3-WilcorWA 588-SWA348-S*Rod furnished with clamp.**Rod furnished with 4 ft., No. 6 tinned or galvanized copper pigtail.NOTE: The diameter of all galvanized ground rods must meet the latest edition of the National Electrical Safety Code (NESC).ai-3June 2015ai - Rods, ground, sectional, 13-milGalvanized steel andCopper-covered steelCopper-covered ground rods are listed with a 13-mil minimum at any point and a 15-mil average covering of copper. All purchases should specify that a factory certification of the thickness of the copper must accompany the shipment of the rods. Rods are copper-covered unless marked galvanized steel.Sectional Ground Rods Manufacturer8' long10' longCouplingDriving studsBlackburn6258S13MX6260S13MX60C60DS60CNT2*60DSNT*Demark--GRC 58B*- Galv. SteelGRC 58G* Erico 635883635803CR-58/CC-58*DS58Galvan Industries, Inc. Galv. Steel 6258G13S6260G13SGRC-625G**GRC-34G** Copper-covered60-C60-DS60-TC*Hubbell (Chance) Galv. SteelC203-005285128611-Joslyn--J9182J9186 Galv. Steel--J23282A-South Atlantic, LLC (Southern Grounding)CS58813CS34813CS581013CS341013----* Threadless coupling or drive head** Threadless coupling for galvanized rodNOTE: The diameter of all galvanized ground rods must meet the latest edition of the National Electrical Safety Code (NESC).ai-4March 25, 2022ai - Rods, Ground, 10-milThese copper-covered ground rods are listed with a 10-mil minimum at any point. They must also be Underwriters Laboratory (UL) listed. All purchases should verify that rods have official UL mark.Copper-covered steelManufacturer5/8” x 8'?” x 8’5/8” x 10' ?” x 10’Erico615880613480615800613400Galvan Industries, Inc.62587508Southern Grounding Products (South Atlantic, LLC)C588C348C5810C3410ai-5March 25, 2022ai - Rods, ground, sectional, 10-milGalvanized steel and Copper-covered steelCopper-covered ground rods are listed with a 10-mil minimum at any point. They must also be Underwriters Laboratory (UL) listed. All purchases should verify that rods have official UL mark. Rods are copper-covered unless marked galvanized steel.Sectional Ground RodsManufacturerRodCouplingDriving studs5/8” x 8'?” x 8’5/8” x 10'?” x 10’5/8”?”5/8”?”Erico635880633480635800633400CR58CR34DS58DS34Galvan Industries, Inc.6258S6260S60-C60-DSSouthern Grounding Products (South Atlantic, LLC)CS588CS581058C34CDS58DS34NOTE: The diameter of all galvanized ground rods must meet the latest edition of the National Electrical Safety Code (NESC). aj-1March 2013aj - Clamp, Ground RodManufacturerFor 5/8" Copper-covered RodFor 3/4" Galv. or Stainless Steel RodFor 5/8" Galv. or Stainless Steel RodTE Connectivity - EnergyC-LOK Series81412-181412-1BlackburnG5--BoggsG31--BurndyGRC58--C & R ProductsCRGC-58--Connector CastingsG5--DossertGNL62H--*Erico (Cadweld)??1 ground wire??2 ground wiresGR1-161GGT1-161GGR1-181GGT1-181GGR1-161GGT1-161GEricoEHL58C1TEHL58C1KEHL58C1G---EHL58G1TEHL58G1KEHL58G1GEritech (Carolina Galv./Knight)CP 58UCSS-*FCI BurndyType BCR-1BS-2012Type BCR-1BS-2017Type BCR-1BS-2012Galvan Industries, Inc.G5--SRCSRCSRCSRC-SSSRC-SSSRC-SSDGC-5844--DGC-5866--Greaves/MercuryG-580--*Harger??1 ground wire??2 ground wiresG11-588G21-588G11-348G21-348G11-588G21-588Hubbell (Anderson)GC-5--IlscoGRC-58--JoslynJ8392ABJ25985J25932KortickK4647--Lew Electric FittingsGRC-5/8"--Line HardwareRC-58CE--Penn-UnionCEB-2CEB-3-TNCEB-2-TNMacLean (Reliable)E5834593459*ThermoweldType CR-1M-2012Type CR-1M-2017Type CR-1M-2012WilcorHGR5/8WAU 5834-BWAU 5834-B*Includes disposable molds.Conditional Listaj(1)January 2009aj - Clamp, ground rodManufacturerConditionsBurndyYGHP (for 5/8" copper-covered rods)To obtain experience.DeMarkCopperhead (for 5/8” copper-covered, galvanized, and stainless rods)To obtain experience.DMC Power **GC***B***-625 (for 5/8” steel rods)To obtain experience.GC***B***-662 (for 5/8” copper clad rods)GC*?***-750 (for 3/4” steel rods)Line Hardwar”RC-3?”or 5/8" and 3/4") galvanized or stainless steel ground rodsTo obtain experience.Thomas & BettsDGC58-44 (#4 copper ground wire)DGC58-66 (#6 copper ground wire)(for 5/8" copper-covered rods)To obtain experience.** These clamps require the use of special swage connection tools for installation. Manufacturer’s recommendations should be followed.al-1February 2014al - Staples, ground wireApplicable Specification: “ANSI C135.14, "Standards for Staples with Rolled or Slash Points"Length x Spread( i?es):?/2 x 1/42 x 1/21-1/2 x 3/83 x 1-1/16Diameter:9 gaugeGalv. Steel8 gaugeGalv. Steel8 gaug?opper-Coated1/4MoldingApolloAP52l-S1672GAP521-S1570AP501-S6652AP500-S6497Copperweld Bimetallics, LLC-CP52--FWCFW1672GFW157FW6652FW6497Hubbell (Chance)C205-0247C205-021691679161JoslynJ1672GJ157J6652J6497Kortick--K247K236L & J Industrial StaplesC1525148-GD2050162-GC1538162-CD3090250-CLarson-350453750233721312Lindsey10248--10270Minerallac (Redmore?)CG1525KDG2050QCG2050QCC1538QDG3090WMacLean (Continental)U88U86U48U46Barbed staples, ground wireLength x Spread (inches)1-1/2 x 3/82 x 5/81-1/2 x 3/83 x 1-1/16Diameter.131Galv. Steel.165Galv. Steel.140Copper-Coated7/32Galv. SteelApolloAP520-57488HTGAP50l-S66525--Hubbell Power SystemsC205-0460C205-0463C205-0464C205-0462JoslynJ7656J7672J7682J7664Minerallac (Redmore?)CG1538M(B)CG2063T(B)CC1538P(B)CG3090N(B)Staples, alumoweldLength x Spre?(inches)2 x 1/21-1/2 x 3/83 x1-1/16Diameter?auge8 gauge1/4 moldingApolloAP531-S6655ALAP531-S6652ALAP530-S7493ALMinerallac (Redmore?)--DA3090WClip, ground wireKearney/Eaton12326Conditionalal(1)March 2018al - Staples, ground wireApplicable Specification: ANSI C135.14, "Standards for Staples with Rolled or Slash Points"ManufacturerThickness (gauge)ConditionsITW PaslodeGS-16 (1-1/2” Galvanized)16 ga.To obtain experience.FascoEF40-315 (1-9/16” Galv. Steel)10 ga.To obtain experience.EF40-315CU (1-9/16” Copper-Clad)10 ga.To obtain experience.Note:These staples utilize power tools for installation. Use of a hammer for hand driving of these staples is not recommended.an-1September 2013an - Transformers, distribution, pole typePrimary Voltages 7.2/12.5, 7.62/13.2 and 14.4/24.9 kVApplicable Specifications: "RUS Specifications for Rural Distribution Transformers," D-10Listing is by type rather than by catalog number because of the many possible combinations of voltage, kVA and taps and protective equipment.7.2/12.5 & Dual7.62/13.214.4/24.9VoltagePower Partners, Inc. Conventional, single bushingS-B3S-B3S-B3 Self-protected, single bushingCSP-B3CSP-B3CSP-B3 Conventional, two bushingS-AS-AS-A Type S-B3 may also be obtained with internal fuse, with internal fuse and double gap, and with lightning arrester and open link cutout (Type PC).Arkansas Electric Cooperative Conventional, single bushingASE--Central Moloney Conventional, single bushingAODAODAOD Conventional, two bushingAODAODAOD Self-protected, single bushingDVPDVPDVP The single bushing transformer may also be obtained with bushing mounted cutout and lightning arrester, and with internal fuse and double gap.Eaton1 Conventional, single bushing*REA-ConvREA-Conv REA-Conv Self-protected, single bushing*REA-CSPREA-CSPREA-CSP Conventional, two bushing*REA-ConvREA-ConvREA-Conv Conventional single bushing type may also be purchased with external overload protection and double gap and with bushing mounted cutout and lightning arrester. *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.Note:Available with optional covers insulated for 15 kV dielectric strength at additional cost. (Transformer covers with higher electrical insulation, together with other coordinated electrical insulating protective measures, should help to significantly lessen shock and electrocution hazards to raptors, other birds, and small mammals.)an-1.1June 2013an - Transformers, distribution, pole typePrimary Voltages 7.2/12.5, 7.62/13.2 and 14.4/24.9 kV7.2/12.5 &Dual7.62/13.2 14.4/24.9 VoltageERMCO, INC.1 Conventional, single bushingCONVCONVCONV Conventional, two bushingCONVCONVCONV Self-protected, single bushingCSPCSPCSPThe single bushing transformer may also be obtained with double gap and internal fuse (Type DG) or lightning arrester and external cutout (Type COLA).Dead-front for use in “enclosure: Add “R"”(Radial) or "LF" (Loop feed) to designationHoward Industries Conventional, single bushingREC-CREC-CREC-C Conventional, two bushingConv-2BConv-2BConv-2B Self-protected, single bushingREC-PREC-PREC-PConventional, single bushing, amorphous coreREC-C-AMREC-C-AMREC-C-AMConventional, two bushing, amorphous coreConv-2B-AMConv-2B-AMConv-2B-AMSelf-protected, single bushing, amorphous coreREC-P-AMREC-P-AMREC-P-AMKuhlman Conventional, single bushingIII Conventional, two bushingBBB Self-protected, single bushingHHHType I may also be purchased with internal fuse, with internal fuse and double gap (Type G), and with bushing mounted cutout and lightning arrester (Type J).Moloney Electric, Inc. Conventional, single bushingCONVCONVCONV Conventional, two bushingCONVCONVCONV Self-protected, single bushingCSPCSPCSPNote:Available with optional covers insulated for 15 kV dielectric strength at additional cost. (Transformer covers with higher electrical insulation, together with other coordinated electrical insulating protective measures, should help to significantly lessen shock and electrocution hazards to raptors, other birds, and small mammals.)an-1.2February 2017an - Transformers, distribution, pole typePrimary Voltages 7.2/12.5, 7.62/13.2 and 14.4/24.9 kV7.2/12.5 &Dual7.62/13.214.4/24.9VoltageMagnetic Electric Conventional, single bushingAODAODAOD Conventional, two bushingAODAODAOD Self-protected, single bushingAODAODAODMagnetron, S.A. Conventional, single bushing, Single Phase 10–500 kVAXX-Conventional, two bushing, Single Phase 10–500 kVAXX-Sesco Conventional, single bushingRU-- Self-protected, single bushingESP-- Conventional, two bushingCONV-- Type RU may also be purchased with internal fuse and/or lightning arrester.United (Ky. AEC) Conventional, single bushingSCSCDSC Conventional, two bushingSCSCDSC Self-protected, single bushingSCPSCPDSCPSC and DSC may be purchased with external fuse and arrester (SP and DSP)VanTran Conventional, single bushingCR-- Self-protected, single bushingCSP-R-- Conventional, two bushingCD--an-2September 2013an - Transformers, PowerSingle-Phase, Step-Down for Distribution Substation UsePrimaryNominal OA Capacity (kVA)ManufacturerVoltage (kV)167 - 8331250 - 10,000ABB34.4XX43.8XX67.0XX115XCentral Moloney34.4XEaton*34.4XX43.8XX *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.Kuhlman34.4XX43.8XX67.0XX115XPennsylvania Transformer Technology, Inc.34.4XX43.8XX67.0XXWaukesha Electric Systems34.4XX43.8XX67.0XX115XAll acceptances are based on RUS Specification S-3: Specifications for Step-Down Distribution Substation Transformers, and, 15 kV or 25 kV class secondary voltages.115 kV and 138 kV transformers may have one step reduced BIL.an-3November 18, 2020an - Transformers, PowerThree-Phase, Step-Down for Distribution Substation UsePrimaryNominal OA CapacityManufacturerVoltage - kV750 to 3750 kVA5 to 30 MVAABB34.4XX43.8XX67.0XX115X138XTransformers 5 MVA and larger also accepted as load tap changing transformers using ABB Types UTSA, UTT-B and UVW load tap changers.Eaton*34.4XX43.8XX *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.Transformers 5 MVA and larger also accepted as load tap changing transformers using Eaton Types 550, 550B and 550C load tap changers.Kuhlman34.4XX43.8XX67.0XX115X138XTransformers 5 MVA and larger also accepted as load tap changing transformers using Siemens-Allis Types TLS and TLH load tap changersVirginia Transformer34.4XX43.8X67.0X115X138XTransformers 5 MVA and larger also accepted as load tap changing transformers using ABB type UZE and Reinhausen type RMV-2 tap changers.an-3.1November 18, 2020an - Transformers, PowerThree-Phase, Step-Down for Distribution Substation UsePrimaryNominal OA CapacityManufacturerVoltage - kV750 to 3750 kVA5 to 30 MVAABB34.4XX43.8XXPrimaryNominal OA CapacityManufacturerVoltage - kV750 to 3750 kVA5 to 30 MVAPennsylvania Transformer Technology, Inc.34.4XX43.8XX67.0XX115X138XTransformers 5 MVA and larger also accepted as load tap changing transformers using Eaton Types 550, 550B and 550C load tap changers.Waukesha Electric Systems34.4XX43.8XX67.0XX115XX138XTransformers 5 MVA and larger also accepted as load tap changing transformers using ABB Type UZE; Reinhausen RMT-1;Reinhausen RMV-2; or Waukesha Electric Systems Type UZD load tap changers.Notes:All acceptances are based on RUS Specification S-3: Specifications for Step-Down Distribution Substation Transformers, and, 15 kV or 25 kV class secondary voltages.115 kV and 138 kV transformers may have one step reduced BIL.an-4February 2014an - Transformers, Step Ratio, Single Phase,Autotransformers or Two-Winding Transformersfor Use in System Voltage ConversionManufacturerDesignationSizeHoward Industries 2-WNDSTEPS167-500 AUTOSTEP-AUTO100-1500NOTE: Two-winding transformers are self-protected under external short circuit in accordance with ANSI C57.12.90A. Auto-transformers will withstand 25 times rated current under external short circuit in accordance with ANSI C57.12.90A.Conditional Listan(1)September 2013an - Transformers, Distribution, Pole TypeManufacturerConditionsPower Partners, Inc.7.2/12.5, 7.62/13.214.4/24.9 kV & Dual VoltageSingle-phase, single bushing, 25 and 50 kVA pole type distribution transformers with amorphous metal cores.Single-phase, single bushing and two-bushing with internal UMX Under-oil Arrester or with internal "Tranquell" Under-oil Arrester.To obtain experience.To obtain experience.Eaton17.2/12.5, 7.62/13.2, 14.4/24.9 kV and Dual Voltage*Single-phase, single bushing, self-protected, with Magnex InterrupterAbove or Conventional, single or two bushing; Type REA Conv. or Self-protected, single bushing Type REA-CSP with Type AZU, MOV, heavy-duty under-oil arrester. To obtain experience.To obtain experience. *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.ERMCO, Inc.17.2/12.5 and 7.62/13.2 and14.4/24.9 kVSingle-phase, single bushing with internal Tranquell Under-oil ArresterTo obtain experience.Note:Available with optional covers insulated for 15 KV dielectric strength at additional cost. (Transformer covers with higher electrical insulation, together with other coordinated electrical insulating protective measures, should help to significantly lessen shock and electrocution hazards to raptors, other birds, and small mammals.)Conditional Listan(1.1)June 25, 2020an - Transformers, Distribution, Pole TypeManufacturerConditionsProlec GE12.47/7.2, 13.2/7.62, & 14.4/24.9 kV; 5 through 167 kVASingle bushing and two bushingConventional & self-protectedand 12.47/7.2 x 24.9/14.4 dual voltageTo obtain experience.Howard Industries7.2/12.5, 7.62/13.2,14.4/24.9 kV and Dual VoltageSingle-phase, single bushing, and two bushingwith internal "AZU" or "Tranquell" under-oil arresterTo obtain experience.Kuhlman7.2/12.5 kV and 7.62/13.2 kVToroform design 10, l5, & 25 kVATo obtain experience.NECO7.2/12.5 kV and 14.4/24.9 kVSingle-phase, two bushing,10-50 kVA, ConventionalTo obtain experience.VanTran14.4/24.9 kV and Dual VoltageConventional, single bushing Type CRConventional, two bushing Type CDSelf-protected, single bushing Type CSP-RTo obtain experience.To obtain experience.To obtain experience.Conditional Listan(1.2)June 25, 2020an - Transformers, Distribution, Pole Typewith non-porcelain secondary bushingsManufacturerConditionsEaton*Fully or conditionally accepted with Central Moloney polymer secondary bushingsTo obtain experience.*Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.ERMCO, INC.1Fully or conditionally accepted with Central Moloney polymer secondary bushingsTo obtain experience.Howard IndustriesFully or conditionally accepted with Central Moloney polymer secondary bushingsTo obtain experience.KuhlmanFully or conditionally accepted with Central Moloney polymer secondary bushingsTo obtain experience.Magnetic ElectricFully accepted with Central Moloney polymer secondary bushingsTo obtain experience.Prolec GEFully accepted with Celeco and H.J. International polymer secondary bushingsTo obtain experience.United (Ky. AEC)Fully accepted with Central Moloney polymer secondary bushingsTo obtain experience.Note:Available with optional covers insulated for 15 KV dielectric strength at additional cost. (Transformer covers with higher electrical insulation, together with other coordinated electrical insulating protective measures, should help to significantly lessen shock and electrocution hazards to raptors, other birds, and small mammals.)Conditional Listan(2)July 2009an - Transformers, PowerSingle-Phase, Step-Downfor Distribution Substation UseConditions for Acceptance: “E” - To obtain experience “T” - Manufacturer to furnish RUS with satisfactory test results (Only performance specifications have been submitted)PrimaryNominal OA Capacity (kVA)ManufacturerVoltage - kV–167 - 8331250 - 10,000Delta-Star34.4EE43.8EE67.0ET115-TESCO34.4E-Ferranti-Packard67.0TEIndustrias IEM, S.A. de C.V.67-EAll acceptances are based on RUS Specification S-3: Specifications for Step-Down Distribution Substation Transformers, and 15 kV or 25 kV class secondary voltages. 115 kV and 138 kV transformers may have one step reduced BIL.Conditional Listan(3)June 2011an - Transformers, PowerThree-Phase, Step-Downfor Distribution Substation UseConditions for Acceptance: “E” - To obtain experience “T” - Manufacturer to furnish RUS with satisfactory test results (Only performance specifications have been submitted)PrimaryNominal OA CapacityManufacturerVoltage - kV750 to 3750 kVA5 to 30 MVADelta Star34.4EE43.8EE67.0EE115-E138-TTransformers 5 MVA and larger also accepted as load tap changing transformers using Seimens-Allis Types TLS and TLH-21 load tap changers.Ferranti-Packard34.4ET67.0TE115-EGE-Prolec67-E115-E138-ETransformers 5 MVA and larger also accepted as load tap changing transformers using Reinhausen type RMV-II, Reinhausen type RMV-A, and ABB type UZE load tap changers.Howard Industries115-E138-EHyundai Heavy Industries Co., Ltd.115 -ETransformers 5 MVA and larger also accepted as load tap changing transformers using ABB type UZE and Reinhausen type RMV-II load tap changers.Industrias IEM, S.A. de C.V115-EMGM34.4ET43.8ET67.0TETransformers 5 MVA and larger also accepted as load tap changing transformers using ABB Types UTSA and UTT-B load tap changers.CG Power Systems USA, Inc.34.4-E67.0-E115-ETransformers 5 MVA and larger also accepted as load tap changing transformers using Reinhausen type RMV-II, Reinhausen type RMV-A, and ABB type UZE load tap changers.Uptegraff34.4TE43.8TEConditional Listan(3.1)November 18, 2020an - Transformers, PowerThree-Phase, Step-Downfor Distribution Substation UseConditions for Acceptance: “E” - To obtain experience “T” - Manufacturer to furnish RUS with satisfactory test results (Only performance specifications have been submitted)PrimaryNominal OA CapacityManufacturerVoltage - kV750 to 3750 kVA5 to 30 MVAGeorgia Transformer138-EWEG67.0-E115-E138-ETransformers 5 MVA and larger also accepted as load tap changing transformers using Reinhausen type RMV-II load tap changers.Howard Industries67.0-EAll acceptances are based on RUS Specification S-3: Specifications for Step-Down Distribution Substation Transformers, and 15 kV or 25 kV class secondary voltages.115 kV and 138 kV transformers may have one step reduced BIL.Conditional Listan(4)February 2014an - Transformers, Step Ratio, Single Phase,Autotransformers or Two-Winding Transformersfor Use in System Voltage ConversionCondition of Acceptance: To obtain experienceManufacturerDesignationSizePower Partners, Inc. 2-WND"Jumbo"167-500Central Moloney 2-WNDAOD167-500Eaton* 2-WND"Round-Coil"167-500 AUTOMEPS-AUTO167-1000 *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.Delta Star 2-WNDLTD167-500 AUTOLTD-A167-1000General Electric 2-WNDHS STEP167-500 AUTOHS STEP167-1000NOTE: Two-winding transformers are self-protected under external short circuit in accordance with ANSI C57.12.90A. Auto-transformers will withstand 25 times rated current under external short circuit in accordance with ANSI C57.12.90A.ao-1July 2009ao - Bolt, strand eye, straight (thimble eye)Applicable Specification:ANSI C135.4, "Standards for Galvanized Ferrous Eye Bolts and Nuts for Overhead Line Construction."Applicable Sizes:5/8 inch, 6 through? inch length 3/4 inch, 8 through 12 inch lengthThe following manufacturers have shown compliance with the applicable specification:Hubbell (Chance) Joslyn Manufacturing CompanyKortick Manufacturing CompanyMacLean (Continental)ap-1December 2, 2021ap – Clamp, hot lineCopper and Copperweld-copper Conductor(Clamps with internal springs and enclosed threads)ConductorConductor SizeCopper:6 thru 2/0Copperweld-copper:8A thru 2AManufacturerAFLHT1-563/563RUSHT2-858/563RUSBlackburnHLC 2108Connector Products, Inc.HTC 100HTC 100-6HTC 200HTC 200-4Electric Motion CompanyEM HLC-101H-J EnterprisesUBBC20-001Hubbell (Anderson)BC-2/0Hubbell (Chance)S1520CCHubbell (Fargo)GH-100SGH-201 (For use with CL Fuse)Ideal3532MacLean (Reliable)C1520Penn-UnionHLC-020-LSRichards Manufacturing, Sales Inc.BHLC-100ap-2December 2, 2021ap - Clamp, hot lineACSR with armor rodsClamps listed below have spring action and enclosed thread chambers.Conductor SizeManufacturerTap Conductor477 & 336.44/0 & 3/02/01/0 & 24Aluma-FormAluminumCopperAF-1540AF-1540AF-BC20AF-BC20AF-1530AF-1530AF-BC20AF-BC20AFLAluminumHT2-858/563RUSHT3-1125/563RUSHT1-563/563RUSHT2-858/563RUSHT1-563/563RUSHT2-858/563RUSHT1-563/563RUSHT1-563/563RUSCopperHT2-858/563RUSHT3-1125/563RUSHT1-563/563RUSHT2-858/563RUSHT1-563/563RUSHT2-858/563RUSHT1-563/563RUSHT1-563/563RUSConnector Mfg.AluminumHL 4/0---Copper----Connector Products, Inc.AluminumHTC 200HTC 200-4 HTC 300HTC 100HTC 100-6HTC 200HTC 200-4HTC 100HTC 100-6HTC 200HTC 200-4HTC 100HTC 100-6HTC 100HTC 100-6CopperHTC 200HTC 200-4 HTC 300HTC 100HTC 100-6HTC 200HTC 200-4HTC 100HTC 100-6HTC 200HTC 200-4HTC 100HTC 100-6HTC 100HTC 100-6H-J EnterprisesAluminum-UBBC30-001UBBC30-001UBBC30-001Copper-UBBC30-001TPUBBC30-001TPUBBC30-001TPHubbell (Anderson)AluminumAC-800AH-4AH-4AH-4CopperAC-800-GPAH-4-GPAH-4-GPAH-4-GPHubbell (Chance)AluminumS1540-AAS1540-AAS1530-AAS1530-AACopperS1540-ACS1540-ACS1530-ACS1530-ACHubbell (Fargo)AluminumGH-202ALGH-202ALGH-101AGH-101ACopperGH-102ACGH-102ACGH-101ACGH-101ACMacLean (Reliable)Aluminum--C1530AC1530ACopper--C1530AC1530APenn UnionAluminum--HLCA-040HLCA-040Copper--HLCA-040HLCA-040Richards Manufacturing, Sales Inc.AluminumAHLC300-TNAHLC300-TNCopperUtilcoAluminum-HLC-397-HLC-40Copper----ar-1July 2009ar - WireholderApplicable specification: "RUS Specification for Service Wireholders," D-15With #22 Wood ScrewBlackburnSW3Hubbell (Chance)3-11-44Porcelain Products1986NOTE: For triplex type service cable see clevis type wireholders on page bt-1.Conditional Listar(1)July 2009ar - Wireholder(with #22 wood screw)ManufacturerConditionsHubbell Power Systems (Chance)To obtain experience.C207-0138 (nylon alloy)JoslynTo obtain experience.J089Z (nylon alloy)as-1July 2009as - Clevis, service swingingApplicable Specifications: "RUS Specifications for Service Swinging Clevises," D-7ManufacturerClevis Only*Clevis with Wet Process SpoolClevis with Dry Process SpoolHubbell (Chance)1948C1948C-C909-10311948C-0606JoslynJ1614--KortickK9260K9141K9142MacLean (Continental)U32004U31003U31004*Catalog number does not include spool; for spool insulators see Item cm.at-1July 2009at - Guy Marker, 8 Foot LengthSteelManufacturerFull RoundHalf RoundJoslynJ1618J1528KortickK3729-at-2March 2016at - Guy Marker8 Foot LengthPlastic or FiberglassManufacturerCatalog NumberAuburn ExtrusionsTK-808 (Yellow)(with bolt type clamp)Charles Industries 12-08GWMYC-FRCustom PlasticsCPI-100XX-PVC SeriesDulmisonHGG-OL8Y-C (Yellow)*Electrical Materials70-7 tie G (Gray)*70-7 tie Y (Yellow)*70-7 tie O (Orange)*70-7 tie YORS (Yellow with Orange Stripes)*Hubbell (Chance)96-PBG-2 (Gray)96-PBG-2Y (Yellow)96-PBG-2ORG (Orange)96-FRPMR-GRY (Gray)*96-FRPMR-YEL (Yellow)*96-FRPMR-ORG (Orange)*96-FRPMR-GRN (Green)*Jabat, Inc.BU31020YE (Yellow)ILQT2291 (Yellow)JoslynJ1491Y (Yellow)J1491G (Gray)J5518 (Yellow)*MangrumR-8-YOsmoseOZ-25-18R (Yellow)Preformed Line ProductsPG-5508 (Gray)*PG-5518 (Yellow)*Radar6032B (Yellow)*Vaughn003-7l40 (Gray)*004-7l40 (Yellow)*005-7l40 (White)*Virginia PlasticsTG-137-8G (Gray)*TG-137-8Y (Yellow)*FG-8G (Gray)**FG-8Y (Yellow)*** For use with formed or automatic type deadends for guy strand; will not fit over bolt type guy clamps.** Available with either 1 or 2 bolt clamps.at-3October 2015at - Guy Marker(Non-Flame Retardant)8 Foot LengthPlastic or FiberglassManufacturerCatalog NumberCustom PlasticsCPI-100XX-PVC SeriesCharles Industries 12-08GWMYCJoslynJ5718 (Yellow)*J1493Y (Yellow)L. F. ManufacturingMS-8-YPetroflexP100-SDR17 SeriesPreformed Line ProductsPG (Poly) SeriesR&M PlasticsGGY-TU-8RMY GG-SM-8*Radar Engineers6034 and 6036Virginia PlasticsTGP-16 PF*For use with formed or automatic type deadends for guy strand; will not fit over bolt type guy clamps.Conditional Listat(1)February 2013at - Reflective Guy Marker, 8-foot lengthPlastic or FiberglassManufacturerConditionsav-1March 2020av – Conductor, ACSRApplicable Specification: ASTM Specification B 232 Preferred Sizes:DistributionTransmission4 – 6/11/0 – 6/14 – 7/12/0 – 6/12 – 6/13/0 – 6/12 – 7/14/0 – 6/11/0 – 6/1266.8 kcmil – 26/72/0 – 6/1336.4 kcmil – 26/73/0 – 6/1477 kcmil – 26/74/0 – 6/1556.5 kcmil – 26/7266.8 kcmil 18/1795 kcmil – 26/7336.4 kcmil 18/1954 kcmil – 54/7477 kcmil 18/1NOTE: Larger sizes may be used where the engineer’s study shows they are required.The following manufacturers have shown compliance with the applicable specifications:Alcan CableCentelsaConductores Monterrey S.A. de C.V.CondumexEncore Wire CorporationGeneral CableKobrex S.A. de C.V.Marmon Utility LLC (Hendrix/Kerite)Midal Cables Ltd.NehringNexans CanadaNexans KoreaNorandaPhelps DodgePhelps Dodge – HondurasPhelps Dodge – MexicoProcables S.A.Prysmian SouthwireSynergy Cables USA, Ltd.Taihan Electric Wire WTECNOTES:Conductors with 18/1 stranding have different sag characteristics than conductors with 6/1 or 26/7 stranding. This difference in sag characteristics must be taken into consideration in the line design.266.8 kcmil 26/7, 336.4 kcmil 26/7, and 477 kcmil 26/7 may be used for distribution underbuild on transmission lines.av-2June 2015av - Conductor, copperApplicable Specifications: ASTM Specification B1 for hard-drawn solidASTM Specification B8 for hard drawn stranded and soft strandedASTM Specification B3 for soft or annealed solidPreferred Sizes:Hard-drawn solid - 4 and 6Soft or annealed solid - 4 and 6Hard-drawn stranded - 2x3, 1/0 x 7, 2/0 x 7Soft stranded - 4 and 6The following manufacturers have shown compliance with the applicable specifications:Alan Wire CompanyConductores Monterrey S.A. de C.V.CondumexEncore Wire CorporationGeneral CableHickory Wire, Inc.NehringProcables S.A.Republic WireRome CableSeal Wire CompanyService Wire CompanySouthwireav-3September 2010av - Conductor, Copper and Copper-clad steelApplicable Specification: ASTM Specification B 229Preferred SizesDistributionTransmission8A1/0 F6A2/0 F4A3/0 F2A4/0 FThe following manufacturers have shown compliance with the applicable specification for the sizes indicated:Copperweld Bimetallics, LLC(All sizes)Southwire(2A and smaller)av-4June 2015av - Conductor, Service(Single Conductor)ManufacturerAluminumCopperAlcan Cablex-Conductores Monterreyx-CondumexxxEncore Wire Corporationx-General CablexxNehringx-Nexans Canadax-PrysmianxxRome CablexxSouthwirexxApplicable Specification: ICEA S-95-658 / NEMA WC70 Insulation: Cross-linked thermosetting polyethylene or equal.Conductor: MHD copper or HD (Aluminum 1350) aluminum (Compact or compressed stranded conductor is acceptable.)Marking: Manufacturer's name and type of insulation shall be clearly shown in durable markings on the surface of the insulation at intervals no greater than 24 inches.av-5June 2015av - Conductor, Service Cable(Triplex and Quadruplex)ManufacturerAluminumCopperAlcan Cablex-Conductores Monterreyx-CondumexxxEncore Wire Corporationx-General CablexxHendrixxxNehringx-Nexans Canadax-Phelps DodgexxPhelps Dodge (Honduras)x-PrysmianxxRome CablexxService Wire-xSouthwirexxApplicable Specifications: RUS Specification D-2, Specifications for 600 Volt Neutral-Supported Secondary Service Drop Cables.av-6June 2013av - Conductor, Aluminum AlloyApplicable Specification: ASTM Specification B399Preferred Sizes:DISTRIBUTIONTRANSMISSION6201ACSR Equiv.6201ACSR Equiv.48,690 cmil - 7 str.*4123,300 cmil - 7 str.**1/077,470 cmil - 7 str.*2155,400 cmil - 7 str.**2/0123,300 cmil - 7 str.1/0195,700 cmil - 7 str.**3/0155,400 cmil - 7 str.2/0246,900 cmil - 7 str.4/0195,700 cmil - 7 str.3/0312,800 cmil - 19 str.266,800 cmil246,900 cmil - 7 str.4/0394,500 cmil - 19 str.336,400 cmil559,500 cmil - 19 str.477,000 cmil652,400 cmil - 19 str.556,500 cmil927,200 cmil - 37 str.795,000 cmil*Not recommended for multiphase lines with span lengths exceeding 300 ft.**Not recommended for suspension type construction.The following manufacturers have shown compliance with the applicable specifications:ManufacturerTypeAlcan6201General Cable6201Midal Cables Ltd.6201Procables S.A.6201Phelps Dodge6201Southwire6201Condctores Monterrey6201Conditional Listav(1)September 2010av - conductorManufacturerConditionsAlcan CableDuplex type, with ACSR or AAAC (6201) conductors using preferred conductor sizes.1. To obtain experience.2. Conductor handling and installation shall be in accordance with manufacturer's recommendations.Copperweld Bimetallics, LLCAlumoweld-aluminum6/1 ACSR/AW, 2, 1/0, 2/0, 4/0 4/3 AWAC, 4, 2, 1/01. To obtain experience.General CableACSR/TW, ACSS/TW conductors using preferred conductor sizes.1. To obtain experience.2. Conductor handling and installation shall be in accordance with manufacturer's recommendations.3. Indicate type of steel core wire and class (if applicable) of coating.Phelps DodgeACSR/TW, ACSS/TW conductors using preferred conductor sizes.1. To obtain experience.2. Conductor handling and installation shall be in accordance with manufacturer's recommendations.3. Indicate type of steel core wire and class (if applicable) of coating.Viakon Conductores MonterreyACSR/AW-TP conductors using preferred conductor sizes.1. To obtain experience.2. Conductor handling and installation shall be in accordance with manufacturer's recommendations.3. Indicate type of steel core wire and class (if applicable) of coating.Conditional Listav(2)July 2009av – covered tap wire(for use as primary jumpers)ManufacturerConditionsHendrixTW#2, TW#41. To obtain experience.Conditional Listav(3)July 2009av - Conductor, Service(Single and Multi-Conductor)ManufacturerConditionsSouthwireSIW (Single input wire) type construction in accordance with ASTM B 901.1. To obtain experience.Applicable Specification: ICEA S-95-658 / NEMA WC70 Insulation: Cross-linked thermosetting polyethylene or equal.Conductor: HD (Aluminum 1350) aluminumMarking: Manufacturer's name and type of insulation shall be clearly shown in durable markings on the surface of the insulation at intervals no greater than 24 inches.Conditional Listav(4)April 2015av – Conductor, High TemperaturePreferred Conductor Sizes (equivalent in diameter to the following ACSR conductors)*Transmission Lines 336.4 kcmil - 26/7477 kcmil - 26/7 556.5 kcmil - 26/7795 kcmil - 26/7954 kcmil - 54/71272 kcmil - 54/19ManufacturerConditions3MACCR – Aluminum Conductor Composite ReinforcedTo obtain experience.Conductor handling and installation shall be i accordance with the manufacturer’s recommendations.Use high temperature accessories approved by the manufacturer and accepted by RUS.CTC GlobalACCC – Aluminum conductor Composite CoreGeneral CableACSS – Aluminum Conductor Steel SupportViakonACSS - Aluminum Conductor Steel SupportNOTES: Larger sizes may be used where the engineer's study shows they are required.Conductor diameter should be within 10% of ACSR equivalent diameter size.Conditional Listav(5)July 2009av – Conductor, Twisted Pair (T-2 & VR type)Preferred Conductor Sizes (equivalent in diameter to the following ACSR conductors)*Transmission Lines 336.4 kcmil - 26/7477 kcmil - 26/7 556.5 kcmil - 26/7795 kcmil - 26/7954 kcmil - 54/71272 kcmil - 54/19T-2 type (ACSR-II)Aluminum Conductor Steel Reinforced- Twisted PairACSR or AAAC (6201)ManufacturerConditionsGeneral CableNexans Canada1. To obtain experience.2. Conductor handling and installation shall be in accordance with manufacturer's recommendations.3. Use accessories recommended by the manufacturer and accepted by RUSVR-2 type Aluminum Conductor Steel Reinforced- Twisted PairACSR or AAAC (6201)Vibration DampingManufacturerConditions Southwire1. To obtain experience.2. Conductor handling and installation shall be in accordance with manufacturer's recommendations.3. Use accessories recommended by the manufacturer and accepted by RUSNOTES: Larger sizes may be used where the engineer's study shows they are required.Conductor diameter should be within 10% of ACSR equivalent diameter size.aw-1February 2011aw - Washer, springClip1/4" x 1-3/4" x 3-1/2"Bolt SizeManufacturer5/8"3/4"7/8"Allied Bolt, Inc.70137014-Hubbell (Chance)35403541-JoslynJ3540J3541J3542KortickK2909--Line HardwareSCW-58SCW-34SCW-78Double Coil LockBolt SizeManufacturer5/8"3/4"7/8"1”Electrical Materials Company#MW 5/8”#MW 3/4”#MW 7/8”#MW 1”#MW3/4EXTAllied Bolt, Inc.1108110911201121ax-1February 2011ax - Cutout and Arrester, CombinationNominal System VoltageFor 12.5Y/7.2 kVFor 13.2Y/7.6 kVFor 24.9Y/14.4 kVCutout Max. Voltage Rating7.8 kV15 kV ?15 kV18 kV ?27 kV?3? Bank3? BankApplication3? Bank3? Sect.3? Sect.1? Trans.1? Sect.3? Sect.1? Trans.1? Sect.1? Trans.1? Sect.Cutout Current Rating50*10010050*10050*100ManufacturerTypeMountingCatalog NumbersABBCrossarm7.8 NCX/9 LVG15 NCX/10 LVG15 NCX/10 LVG24.9 NCX/18 LVGCrossarm (L)7.8 LBU-II/9 LVG15 LBU-II/10 LVG15 LBU-II/10 LVG24.9 LBU-II/18 LVGEatonCrossarm (L)AFZS510B SeriesAFZS510C SeriesAFZS510C SeriesAFZS518D SeriesTransformerAFZS110M010AFZS110M010AFZS110M018CrossarmL4B SeriesL4B SeriesL4B SeriesL9C or L9d series(Porcelain)(Porcelain)(Porcelain)(Porcelain)S4B SeriesS4B SeriesS4B SeriesS9D Series(Polymer)(Polymer)(Polymer)(Polymer)Hubbell CrossarmC7 SeriesC7 SeriesC7 SeriesC7 SeriesTransformerCrossarmCP7 Series (Polymer)Kearney/EatonCrossarmKE3AB110E-110KE4AB110E-110KE7BD109E-110Transformer294072294073294074Either normal duty or heavy duty distribution class arresters listed on page ae-1 are acceptable for use with these combination units.*These cutouts have open links and must not be used where fault currents are high or for sectionalizing.(L) Indicates loadbreak type is available.az-1July 2009az - Pole Numbers and Letters, MetalManufacturerCatalog No.Almetek Industries, Inc."E-Z Tags" - Order by descriptionPremax Products1523Tech ProductsEverlast TagElectromarkEMB-1.5EMB-3.0HOLD-AL1HOLD-PL1PERMAGRAVE SLIDE-INS #ET1041-KY-1SPERMAHOLD-AL1PERMAHOLD-PL1SLIDE-1Sba-1September 2010ba - Bolt, Angle EyeThimble TypeApplicable Specification: ANSI C135.4, "Standards for Galvanized Ferrous Eye Bolts and Nuts for Overhead Line Construction"Applicable Sizes : 5/8 inch, 6 through 12 inch length 3/4 inch, 8 through 12 inch lengthThe following manufacturers have shown compliance with the applicable specifications:Allied Bolt, Inc.Hubbell (Chance)Joslyn Mfg. and Supply CompanyKortick Manufacturing CompanyMacLean (Continental)bb-1July 2009bb - Brace, sidearm vertical26" brace24" bolt-hole spacing50" brace24" bolt-hole spacingDixieD6986D6987KortickK1931K1932MacLean (Continental)U5249U5250be-1July 2009be - Reclosers, oil and vacuumMfr.PhasesTypeCircuitVoltageContinuousRatingInt.RatingOil/VacuumHydraulic/ElectronicEaton1H12.5/7.25-501250OH14H12.5/7.25-1002000OH1L12.5/7.225-1004000OH36H12.5/7.25-1002000OH3W12.5/7.2100-56010,000OH3WE12.5/7.256010,000OH3VSA-1212.5/7.2100-56012,000VE1E24.9/14.45-1002500OH(Type E available with shunt lockout solenoid for three-phase operation)14E24.9/14.450-2004000OH3WV34.5/19.95608000OH3WVE34.5/19.95608000OELexington1A Line 12.5/7.25-501250OHSwitch and Model BControls1A Line 12.5/7.225-1002000OHModel D1A Line 12.5/7.225-1004000OHModel KNOTES: 1.Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2.Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(1)July 2009be - Recloser, oil circuit12.5/7.2 kVManufacturerConditionsABBThree phase oil circuit recloser (Shunt trip with static or relay type controls)Type ES-400 (15-400 amperes)Type ES-560 (15-560 amperes)Type ESM-560 (100-560 amperes)Type ES-105 (15-560 amperes)To obtain experience.EatonSingle phase, Type D rated 100 amperes continuous, 10,000 amperes symmetricalTo obtain experience.Lexington Switch and ControlsThree phase oil circuit recloser, 50,100 and 280 ampere frames.A Line, Model 3B (5-50 amperes)Model 3D (5-100 amperes)Model 3K (25-280 amperes)To obtain experience.24.9/14.4 kVLexington Switch and ControlsOil circuit recloser,Single phase-A Line, Model M rated 100 amperesThree phase-A Line, Model 3M rated 100 amperesTo obtain experience.34.5/19.9 kVEatonSingle phase, Type DV rated 100-280 amperes continuous, 8,000 amperes symmetricalTo obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(2)September 2014be - Reclosers, vacuum interrupterManufacturerConditionsABBThree phase Type ESVA rated 560/800 amps continuous, 12,000 amps symmetrical, maximum voltage 15.5 kV for 12.5/7.2 kVThree phase Type ESMVA rated 560 amps continuous, 16,000 amps symmetrical, maximum voltage 15.5 kV for 12.5/7.2 kVTo obtain experience.To obtain experience.EatonSingle Phase Type V4E rated 15 to 200amperes continuous, 6,000 amperessymmetrical, maximum voltage 27 kV for24.9/14.4 kV.Single phase, Type V4H rated 5-100 amperes continuous, 2,000 amperes symmetrical, maximum voltage 15.5 kV for 12.5/7.2 and 13.2/7.62 kVSingle phase, Type V4L rated 50-100 amperes continuous, 6,000 amperes symmetrical, maximum voltage 15.5 kV for 12.5/7.2 and 13.2/7.62 kVThree phase, Type V6H rated 5-100 amperes continuous, 2,000 amperes symmetrical, maximum voltage 15.5 kV for 12.5/7.2 and 13.2/7.62 kVTo obtain experience.To obtain experience.To obtain experience.To obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(2.1)July 2009be - Recloser vacuum interrupterManufacturerConditionsEatonThree phase, Type VW rated 560 amperes continuous, 2,000 amperes symmetical, maximum voltage 15.5 kV for 12.5/7.2 and 13.2/7.62 kVThree phase, Type VWE rated 560 amperes continuous, 12,000 amperes symmetrical, maximum voltage 15.5 kV for 12.5/7.2 and 13.2/7.62 kVThree phase, Type VSA-16 rated 560 amperes continuous, 16,000 amperes symmetrical, maximum voltage 15.5 kV for 12.5/7.2 and 13.2/7.62 kVThree phase, Type VWV27 rated 560 amperes continuous 12,000 amperes symmetrical, maximum voltage 27 kV for 24.9/14.4 kVThree phase, Type VWVE27 rated 560 amperes continuous, 12,000 amperes symmetrical, maximum voltage 27 kV for 24.9/14.4 kVThree phase, Type VWV38 rated 50-560 amperes continuous, 12,000 amperes symmetrical, maximum voltage 38 kV for34.5/19.9 kVTo obtain experience.To obtain experience.To obtain experience.To obtain experience.To obtain experience.To obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(2.2)April 2019be - Recloser, vacuum interrupterManufacturerConditionsEatonThree phase, NOVA-NXT rated 800 amperescontinuous, 12,500 amperes symmetrical,maximum voltage 15 kV, 27 kV and 38 kVThree phase, Type VWVE38 rated 560 amperes continuous, 12,000 amperes symmetrical, maximum voltage 38 kV for 34.5/19.9 kVThree phase, Type VSO-12 rated 560 amperes continuous, 12,000 amperes symmetrical, maximum voltage 38 kV for 34.5/19.9 kVThree phase, Type VSO-16 rated 560 amperes continuous, 12,000 amperes symmetrical, maximum voltage 38 kV for 34.5/19.9 kVSingle phase, type VXE electronically controlled, vacuum interrupting, rated 10-200 amps continuous, 8000 amperes symmetrical, maximum voltage of 15.5 kV for 12.5/7.2 kV & 27 kV for 24.9/14.4 kV systemsTo obtain experience.To obtain experience.To obtain experience.To obtain experience.To obtain experience.Engineering & Equipment de MexicoThree phase, type, EEVW15, rated 25 to 560 amp continuous, 12000 amp interrupting, maximum voltage 15.5 kV for 12.4/7.2 kV.To obtain experience.Hubbell Power SystemsSingle phase, Type VERSA-TECH electronically controlled, vacuum interrupting, rated 400 amperes continuous, 8,000 amperes symmetrical, maximum voltage of 27 kV for 24.9/14.4 kV systems To obtain experience.JoslynThree phase, Type JVR, SF6 insulation, rated 400 amps continuous, 6,000 amperes symmetrical, maximum voltage 15 kV for 12.5/7.2 kVTo obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(2.3)November 29, 2022be - Recloser, vacuum interrupterManufacturerConditionsLexington SwitchSingle phase, type EV627 rated 400 amp continuous, 6000 amp interrupting, maximum voltage 27 kV for 24.9/14.4 kVSingle phase, type EV815 rated 400 amp continuous, 8000 amp continuous, maximum voltage 15.5 kV for 12.9/14.4 kVTo obtain experience.To obtain experience.S&C ElectricSingle phase, TripSaver II (cutout mounting), rated 100 amp continuous, 4000 amp and 6300 amp interrupting, maximum voltage 15.5 kV for 12.9/14.4 kV and 27?kV for 24.9/14.4 kVTo obtain experience.Whipp & BourneThree-phase, Type GVR, SF6 insulation with vacuum interruption, 560 amps maximum continuous, 12000 amps RMS symmetrical interruption for 15.5 kV and 27 kV, 8000 amps RMS symmetrical for 38 kV. 15.5 kV maximum voltage for 12.5/7.2 kV, 27 kV maximum voltage for 24.9/14.4 kV, 38 kV maximum voltage for 34.5/19.9 kV.To obtain experience.SiemensSingle phase, CMR rated 630 amperescontinuous, 12,500 amperes symmetrical,maximum voltage 15 kV, 27 kV and 38 kVTo obtain experience.Multi-phase, CMR rated 630 amperescontinuous, 12,500 amperes symmetrical,maximum voltage 15 kV, 27 kV and 38 kVTo obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(3)July 2009be - Recloser, SF6 interrupterManufacturerConditionsHawker SiddeleyType PMR-3/15 rated at 560 amperes continuous, 12,000 amperes symmetrical maximum, 15.5 kVType PMR-3/27 rated at 560 amperes continuous, 12,000 amperes symmetrical maximum, 24.9 kVTo obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(4)July 2009be - Recloser, vacuum interruption with solid dielectricManufacturerConditionsABBSingle phase, Type OVR electronically controlled, vacuum interruption, solid dielectric, 800 amps maximum continuous, 10000 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14.4 kV.To obtain experience.Three phase, Type OVR electronically controlled, vacuum interruption, solid dielectric, 630 amps maximum continuous, 12500 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14.4 kV.Three phase, Type OVR electronically controlled, vacuum interruption, solid dielectric, 800 amps maximum continuous, 16000 amps RMS symmetrical interruption, 38 kV maximum for 34.5/19.9 kV.To obtain experience.EatonThree phase, Type NOVA electronically controlled, vacuum interruption, solid dielectric, 560 amps maximum continuous, 12000 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14.4 kV.To obtain experience.Single Phase, Type NOVA electronically controlled, vacuum interruption, solid dielectric, 400 amps maximum continuous, 8000 amps RMS symmetrical interruption, or 800 amps maximum continuous, 12500 amps RMS symmetrical interruption 15.5 kV maximum for 12.5/7.2 kV, 29.2 kV maximum for 24.9/14.4 kV.To obtain experience.Three phase, Type NOVA-TS Triple-Single electronically controlled, vacuum interruption, solid dielectric, 400 amps maximum continuous, 12500 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 29.2 kV maximum for 24.9/14.4 kV.To obtain experience.NOTES:Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280 amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(4.1)September 2013be - Recloser, vacuum interruption with solid dielectricManufacturerConditionsG & W Electric CompanyThree phase, electronic, VIPER Series, vacuum interruption, solid dielectric, 800 amps maximum continuous, 16,000 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14/4 kV.To obtain experience.Single phase, electronic, Viper SP, vacuum interruption, solid dielectric, 800 amps maximum continuous, 12,500 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14.4 kV.To obtain experience.Joslyn Hi-VoltageThree-phase, Type TRIMOD 300 series, vacuum interruption, solid dielectric foam, 560 amps maximum continuous, 12000 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14.4 kVTo obtain experience.Single-phase, Type TRIMOD 100 series, vacuum interruption, solid dielectric foam, 560 amps maximum continuous, 12500 amps RMS symmetrical interruption, 17.1 kV maximum for 12.5/7.2 kV, 29.3 kV maximum for 24.9/14.4 kVTo obtain experience.Schneider Electric USA, Inc.Three phase, Type U27-12-125-630, solid dielectric insulation, 630 amps maximum continuous, 12500 amps RMS symmetrical interruption, 27 kV maximum for 24.9/14.4 kV - 125 kV BIL.To obtain experience.SiemensThree phase, Type SDR Recloser, rated 800A maximum continuous, electronically controlled, vacuum interruption, solid dielectric, 12500 amps RMS symmetrical interruption for 15.5 kV, 16000 amps RMS symmetrical interruption for 27 kV, (15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14.4 kV)To obtain experience.S&C Electric CompanyThree phase, IntelliRupter PulseCloser with vacuum interrupter, solid dielectric, 630 amps maximum continuous, 12,500 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14.4 kV.To obtain experience.NOTES:Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280 amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(4.2)November 2015be - Recloser, vacuum interruption with solid dielectricManufacturerConditionsThomas & BettsThree phase, electronic, MVR Series, vacuuminterruption, solid dielectric, 800 amps maximumcontinuous, 12,500 amps RMS symmetricalinterruption, 15.5 kV maximum for 12.5/7.2 kV,27kV maximum for 24.9/14.4 kV, 38 kV maximumfor 34.5 kV/19.9 kVTo obtain experience.Single phase, electronic, MVR Series, vacuuminterruption, solid dielectric, 800 amps maximumcontinuous, 12,500 amps RMS symmetricalinterruption, 15.5 kV maximum for 12.5/7.2 kV,27kV maximum for 24.9/14.4 kV, 38 kV maximumfor 34.5 kV/19.9 kVTo obtain experience.NOJA PowerThree phase, Type OSM15 electronically controlled, vacuum interrupted, solid dielectric, 800 amps maximum continuous,12,500 amps RMS symmetrical interruption, 15.5kV maximum for 12.5/7.2kV.To obtain experience.Three phase, Type OSM27 electronically controlled, vacuum interrupted, solid dielectric, 800 amps maximum continuous,12,500 amps RMS symmetrical interruption, 27kV maximum for 24.9/14.4kV.To obtain experience.Three phase, Type OSM38 electronically controlled, vacuum interrupted, solid dielectric, 800 amps maximum continuous,12,500 amps RMS symmetrical interruption, 38kV maximum for 34.5/19.9kV.To obtain experience.Single Phase, Type OSM38 Series electronically controlled, vacuum interrupted, solid dielectric, 800 amps maximum continuous, 12,500 amps RMS symmetrical interruption, 38kV maximum for 34.5/19.9kV.To obtain experience.Schneider Electric Single phase, Type W27-ACR-Solid-24-6-125, solid dielectric insulation, 400 amps maximum continuous, 6000 amps RMS symmetrical interruption, 24 kV phase to ground - 125 kV BIL.PN 250010000To obtain experienceNOTES:Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280 amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.Reclosers are not acceptable with load current, bushing CT battery chargers.Conditional Listbe(4.3)April 2, 2024be - Recloser, vacuum interruption with solid dielectricManufacturerConditionsSouthern StatesThree-phase and Single-phase, Gang Operated, type SSR, rated 900A maximum continuous, electrically controlled, vacuum interruption, solid dielectric, 16,000 amps RMS symmetrical interruption for 15.5 kV, 12,500 amps RMS symmetrical interruption for 27 kVTo obtain experience.Togami Electric Mfg. Co., Ltd.Single phase, electronic, FAULT CLEAR Series, vacuum interruption, solid dielectric, 800 amps maximum continuous, 16,000 amps RMS symmetrical interruption, 27 kV maximum for 24.9/14.4 kV. To obtain experience.Three phase, electronic, FAULT CLEAR Series, vacuum interruption, solid dielectric, 800 amps maximum continuous, 16,000 amps RMS symmetrical interruption, 27 kV maximum for 24.9/14.4 kV.To obtain experience.NOTES:Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280 amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.Reclosers are not acceptable with load current, bushing CT battery chargers.bh-1July 2009bh - Clevis, Service DeadendApplicable Specification: "RUS Specification for Service Deadend Clevises," D-8ManufacturerClevis Only*Clevis with dryprocess spoolClevis with wetprocess spoolHubbell (Chance)03410341-06060341-C909-1931JoslynJ0313--KortickK9250K9100K9099MacLean (Continental)U32136U31136U36136*Catalog number does not include spool; for spool see Page cm.bi-1January 2015bi - Gain, PoleFor use with rectangular crossarmsHubbell (Chance)4092Joslyn (Flagg)PX252MacLean (Continental)CAG-44-5For braceless crossarms (narrow profile construction)Hubbell (Chance)PG84XE12Joslyn (Flagg)PX182AMacLean (Bethea)GCAF-6AMacLean (Continental)DEA-65-10ATransmissionGrid GainsSizes in inches4" x 4"4" x 9"Hubbell (Chance)PG44PG945Hughes Brothersl263l260Joslyn (Flagg)PX122PX260MacLean (Bethea)GSF-44-7GSFT-95-7MacLean (Continental)GGSF-4040-7GRF-9045-7bj-1July 2009bj - Guy HookApplicable Specification: Edison Electric Institute Specification TD-11- 1951, "Specifications for Guy Hooks and Guy Strain Plates."Hubbell (Chance)6584JoslynJ1019KortickK4031MacLean (Continental)U5310bk-1July 2009bk - Guy PlateApplicable Specifications:Strain Type: Edison Electric Institute Specification TD-11 1951, "Specifications for Guy Hooks and Guy Strain Plates."Lift Type: NoneStrain Type4" x 8" x 14 gageLift Type2-1/2" x 7" x 1/4", 2 holeAlmatK45-1-Hubbell (Chance)65757898JoslynJ1034-KortickK4015K3511Line HardwareGSP-1-MacLean (Continental)U5351UC434bn-1November 2014bn - clamp, loop deadendFor ACSR3/02/01/0 2 4AFL -413413412411BlackburnDLC23DLC2106DLC2106DLC2106DLC2106Burndy - -UW25RUW2RUW2RC & R - -CRLD-10CRLD-10CRLD-10Hubbell (Anderson)LC-74BLC-71BLC-70B1LC-70BLC-70BHubbell (Fargo)GA-145GA-145GA-144GA-144GA-144MacLean (Bethea)ALD-7373-UALD-34-UALD-1313-UALD-1313-UALD-1313-Ubo-1July 2009bo - Shackle, anchorDistribution20,000 lbs.5/8" PinHubbell (Anderson)AS-25Hubbell (Chance)5801JoslynJ2742KortickK4481Lapp33852Lindsey3260Line HardwareAS-1MacLean (Bethea)ASH-45Sur-Loc, Inc.5500Transmission30,000 lbs.50,000 lbs.3/4" bolt7/8" boltJoslynBT3023BNKBT3036BNKMacLean (Bethea)ASH-56-BCASH-67-BCbr-1September 2015br – Chain Link (End Link)ManufacturerCatalog NumberJoslynBT-3082Lapp6415-HTLindsey3403MacLean (Bethea)CL-5Preformed Line ProductsCL-60bs-1November 2011bs - Bolt, single upsetApplicable Specifications: "RUS Specifications for Single and Double Upset Spool Bolts," D-5Diameter, inches:5/85/85/85/8Length, inches:78910ManufacturerAllied Bolt, Inc.--17121713Hubbell (Chance)-77417741-1/27742Joslyn-J2342-1/2J2343-1/2J2344-1/2KortickK4929K4950K4930K4951MacLean (Continental)U3105-1/2U31053U31053AU31054bt-1July 2009bt - Wireholder, clevis typewith No. 24 wood screw(For use with triplex type service cable, Drawing K10C-A)Hubbell (Chance)0192*JoslynJ075**Catalog number does not include insulator. Use secondary type spool insulator with?1-3/4 inch groove diameter. See page cm-1.bu-1May 2010bu - Connector, groundingfor transformer or other equipmentManufacturerCopperAlloy 1Plated CopperAlloy 2AluminumAlloy 3BlackburnTTC-4TTC2P-BurndyEQC632CEQC632C-TN-DossertTGCL8-50TGCL8-50-SN-Hubbell (Anderson)GTCL-23AGTCL-23A-TP-Hubbell (Fargo)GC-207GC-207PGA-220Line HardwareTGL-110TGL-110P-Maclean (Reliable)BVC-207--Penn-UnionGSE-C1GSE-C1TN-Richards Manufacturing, Sales Inc.(Chin Fong Co., Ltd.)RTG512--Tanner-GET-1-TN-1 - For use with copper type ground wire.2 - For use with both copper and aluminum type ground wire.3 - For use with aluminum type ground wire.bv-1August 2014bv - Rods, armor(Includes standard, double insulator, and tapping rods)Aluminum or aluminum alloy rods for use on ACSRManufacturerTypeAFLFormed TypeDulmisonFormed TypeFlorida Wire and CableFormed TypeHelical Line ProductsFormed TypeHelix Uniformed Ltd.Formed TypePreformed Line ProductsFormed TypeCopperweld rods for copper or CWC conductorDulmisonFormed TypeHelical Line ProductsFormed TypePreformed Line ProductsFormed TypeAlumoweld rods for aluminum clad steel (Alumoweld)Overhead ground wireDulmisonFormed TypeHelical Line ProductsFormed TypePreformed Line ProductsFormed Typebx-1July 2009bx - Splice, automaticCopperHubbell (Fargo)MacLean (Reliable)6GL-111614GL-112412 x 3GL-115-1/10 x 7GL-1171072/0 x 7GL-1182073/0 x 7GL-1193074/0 x 7GL-120407CWC8AGL-112-6AGL-113474AGL-115272AGL-117-ACSRGL-400A Series*7650 Series*Aluminum Alloy(6201 and 5005) GL-400A SeriesAL55 Series*For use on conductors 4/0 and smaller only.bx-1.1May 2017bx - Splice, automaticDistributionManufacturerCatalog #AAC AAACACSRAluma-Form, Inc.ASC42#2 & #4#2 & #46/1ASC10201/0 & 2/01/0 & 2/01/0 & 2/0ASC30403/0 & 4/03/0 & 4/03/0 & 4/0Conditional Listbx(1)July 2009bx - Splice, automaticManufacturerConditionsDISTRIBUTIONBlackburn#4, #2 ACSR or 6201 (ACSR equiv.) ATS421/0, 2/0 ACSR or 6201 (ACSR equiv.) ATS10203/0, 4/0 ACSR or 6201 (ACSR equiv.) ATS3040266.8, 336.4 kcmil ACSR ATS266336477 kcmil ACSR ATS3974771. To obtain experience.2. For use on distribution systems only.Connector Products, Inc.2 ACSR(S1000)#1 ACSR(S1000)#2 AAC (S1000)1/0 AAC(S1000)2/0 AAC(S1000)#2 AAAC(S1000)1/0 AAAC(S1000)1. To obtain experience.2. For use on distribution systems only.Hubbell (Fargo)AWAC 4 - 4/3 GLA-105AWAC 2 - 4/3 GLA-110AWAC 1/0 - 4/3 GLA-115266.8 kcmil ACSR 18/1 GL-410336.4 kcmil ACSR 18/1 GL-411477 kcmil ACSR 18/1 GL-413Same as above.Same as above.MacLean (Reliable)266.8 kcmil ACSR 18/1 7657336.4 kcmil ACSR 18/1 7658477 kcmil ACSR 18/1 7659Same as above.DISTRIBUTION AND TRANSMISSIONHubbell (Fargo)266.8 kcmil ACSR 26/7336.4 kcmil ACSR 26/7477 kcmil ACSR 26/7To obtain experience.by-1July 2009by - Deadend, automatic and formed TypeConductor SizeCuCWCHubbell (Fargo)Maclean(Reliable) -4AGD-51527-SDS - 6AGD-51347-SDS -8AGD-512 -2 x 3 -GD-5152714 -GD-51241LD6 -GD-51161LDACSR*BlackburnATD Series*DulmisonAWDG-0805, 0990, and 1135*Hubbell (Fargo)GD-400 Series*MacLean (Reliable)7650 Series PreformedDG Series*For use on conductors 4/0 and smaller only.Aluminum Alloy(6201 and 5005)BlackburnATD SeriesHubbell (Fargo)GD-A SeriesMacLean (Reliable)AL SeriesPreformedDG SeriesConditional Listby(1)July 2009by - Deadends, automatic and formed typeFORMED TYPEManufacturerConditionsPreformed Line ProductsAWAC 4 - 4/3 DG-4560AWAC 2 - 4/3 DG-4562AWAC 1/0 - 4/3 DG-4565To obtain experience.AUTOMATIC TYPEHubbell (Fargo)AWAC 4 - 4/3 GDA-235AWAC 2 - 4/3 GDA-240AWAC 1/0 - 4/3 GDA-245266.8 kcmil ACSR 18/1 GD-53l5A336.4 kcmil ACSR 18/1 GD-53l5A477 kcmil ACSR 18/1 GD-5325ATo obtain experience.1. To obtain experience.2. For use on distribution lines only.MacLean (Reliable)AWAC 4 - 4/3 5201AWAC 2 - 4/3 5202AWAC 1/0 - 4/3 5204226.8 kcmil ACSR 18/1 7657 SDS335.4 kcmil ACSR 18/1 7658 SDS477 kcmil ACSR 18/1 7659 SDSTo obtain experience.1. To obtain experience.2. For use on distribution lines only.bz-1August 9, 2023bz - Switch, oil12.5/7.2 kVTypeDescriptionABBCSL**Single-phase, manual and remotemanual or elec. control, 200 amp.Three-phase, remote manual or elec.control, 200 amp.EatonNR*Single-phase, remote elec. control, 200 amp.VR*Three-phase, remote elec. control,400 amp.General ElectricFKC-2Single and three-phase, manual, 200 amp.FKC-2*Single and three-phase, remote control, 200 amp.Hubbell TrineticsCSDSingle-phase, manual, and remote manual or elec. control, 200 amp. Three-phase, remote manual, or elec. control, 200 amp.VSSingle Phase 15kV, 95kV BIL, 200A vacuum under oil switch, with 11" creep bushings, manual handle, 120V motor operator, 5-pin receptacle, NEMA type pole mounting hanger, and (2) wildlife guards.*Control equipment should be selected in accordance with the requirements of individual installations.**This item is also available in a special design for use in areas where corrosion is a serious problem.bz-2August 9, 2023bz - Switch, oil24.9/14.4 kVTypeDescriptionHubbell TrineticsVSSingle Phase 24kV, 95kV BIL, 200A vacuum under oil switch, with 11" creep bushings, manual handle, 120V motor operator, 5-pin receptacle, NEMA type pole mounting hanger, and (2) wildlife guards.*Control equipment should be selected in accordance with the requirements of individual installations.**This item is also available in a special design for use in areas where corrosion is a serious problem.Conditional Listbz(1)July 2009bz - Switch, oilManufacturerConditionsEatonCapacitor oil switch Type TSC, 38 kV max. 100?ampere capacitor switch, 300 ampere load switch1. To obtain experience.Oil switch with125 kV BIL accessory Type NR, 15?kV, single- phase, remote electric control, 200?amp. at 75 to 100 percent power factor1. To obtain experience.2. For use on single- phase taps of 24.9/14.4 kV multi- grounded wye systems.Conditional Listbz(2)January 2014bz - Switch, vacuum(For capacitor switching)ManufacturerConditionsEaton Type ECS, cycloaliphatic epoxy solid dielectric, vacuum capacitor switch, rated 200 amps, 95kV, 125kV and 150 bil, for use on 15kV, 25kV and 35kV grounded-wye systemsTo obtain experienceThe 25 kV rated switch with 150 kV external bil and 125 kV internal bil can be used in solidly grounded 35 kV applications.Bil options can accommodate normal or extra creepage needs. Available in 95/95, 95/125, 125/125, and 125/50 combinations (internal bil kV/external bil kV).JoslynCapacitor vacuum switch, VerSaVac, 200 Amp, 95 or 125 kV BIL, single-phase or three-phase for use on 15 kV systems1. To obtain experience.2. Single-phase switch rated 125 kV BIL may be used on single- phase taps of 24.9/14.4 kV multi-grounded wye systems.3. Three-phase switch requires special mounting bracket.YaskawaTypes LFG-15E-K (15 kV), LFG-25E-K (25 kV), LFG-35E-K (35 kV) 3-phase SF6 capacitor switch, pole mounted type, 200 A (capacitive), 630 A (continuous)1. To obtain experience.cg-1September 2014cg - Switch, air, three-pole, group-operatedNEMA standard switches for station and line structuresManufacturerAcceptable Mounting on StructuresTilting Ins.TypekVVertical BreakType kVSide BreakTypekVCenter BreakTypekVDouble BreakTypekVABBHorizontalTTR6345HorizontalTTR815-230G & W Electric Co.HorizontalMK-4015-69PMB-40A15-69LPC69-230Hubbell (Chance)HorizontalD6(L)15-34.5Phase over PhaseD6(L)15-34.5VerticalD6(L)15-34.5JohnsonHorizontalVIP15-230LS15-69M15-230Joslyn (Hi-Voltage)HorizontalRF-2(VL)15-230RB-1(VL)15-25HorizontalRB-1*15-115Kearney/EatonHorizontalAR 60-P15-69MEMCOHorizontalAgF15-69EA15-345EE69-230HorizontalAgC15-69Rl4-Cl5-46MORPAC (Morgan)HorizontalVBV (VL)15-230CBV15-230VerticalVBV (VL)15-230CBV15-230Phase over PhaseCBV 15-25Royal SwitchgearHorizontal AVT 15-345SBF 15-46V 15-230CB 34.5-230DEB 34.5-345Phase over PhaseDEV 69-345 UnderhungCB 34.5-230VerticalCB 34.5-230(L) Means gas or solid material full-load interrupters are accepted and available.(VL) Means vacuum full-load interrupters are accepted and available.*These switches may be purchased with reduced voltage vacuum interrupters and may be applied for loop sectionalizing duty when peak recovery voltage does not exceed 25 kVNOTE: Phase-over-phase mounted switches are not acceptable above 25 kV class unless equipped with full-load interrupters. Switches of 15 kV and 25 kV classes with individual phases mounted on wood crossarms or poles must be supplied with insulated interphase and control rods.cg-1.1July 2009cg - Switch, air, three-pole, group-operatedNEMA standard switches for station and line structuresManufacturerAcceptable Mounting on StructuresTilting Ins.TypekVVertical BreakType kVSide BreakTypekVCenter BreakTypekVDouble BreakTypekVS & C***HorizontalAlduti(L)15-34.5Alduti(L)15-25Alduti(L)34.5-46Phase over PhaseAlduti(L)15-25Alduti(L)15-25Alduti(L)34.5-46VerticalAlduti(L)*15-34.5Alduti(L)15-25Alduti(L)*34.5-46SEECOPhase over PhaseGOABS(VL) 15-69Siemens-AllisHorizontalAVB(VL)**115-345CB115-230CBL-2115-230Southern StatesHorizontalEV15-230TA(VL) 15-69SSB-T 15-69EC 115-230TurnerPhase over Phase(1D, 2D, 3D)(VL)15-161Horizontal1D(VL)15-161HorizontalTH1(VL)15-161USCOHorizontalAVR(VL)**15-230ASB35-138AGCH **15-345HorizontalAGCH-V**34.5-230Phase over PhaseASB-II15-25GCH15-23(L) Means gas or solid material full-load interrupters are accepted and available.(VL) Means vacuum full-load interrupters are accepted and available.*These switches, except 34.5 kV Alduti vertical break, are available and accepted with the S & C type SMD substation fuse cutouts listed on page af-3.** Also available in bronze in some ratings.***Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5 kV on request.NOTE: Phase-over-phase mounted switches are not acceptable above 25 kV class unless equipped with full-load interrupters. Switches of 15 kV and 25 kV classes with individual phases mounted on wood crossarms or poles must be supplied with insulated interphase and control rods.cg-2July 2009cg - Switch, air, three pole, group operated(Factory Preassembled)(FOR USE ON STEEL SUBSTATION STRUCTURES)ManufacturerMountingVertical Type kVSide Break Type kVHubbell (Chance)Vertical-D7(L) 15-27Horizontal-D7(L) 15-27S & C*Phase-over-PhaseAlduti(L) 34.5(200 kV BIL)Alduti(L) 34.5(200 kV BIL)VerticalAlduti (L) 34.5(200 kV BIL)(L) Means gas or solid material full-load interrupters are accepted and available.*Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5?kV on request.cg-3July 2009cg - Switch, air, three-pole, group operated(not Suitable for Substation Use)ManufacturerAcceptable MountingVertical BreakTypekVSide BreakTypekVCenter BreakTypekVHubbell (Chance)HorizontalD6(L)15-34.5Phase over PhaseD6(L)15-34.5VerticalD7(L)15-34.5Eaton (Kearney)HorizontalM-FORCE(L)15-35Phase over PhaseM-FORCE(L)15-35VerticalM-FORCE(L)15-35Royal SwitchgearHorizontalV15-23Phase over PhaseV15-23(L) Means gas or solid material full-load interrupters are accepted and available.(VL) Means vacuum full-load interrupters are accepted and available.NOTE: Phase-over-phase mounted switches are not acceptable above 25 kV class unless equipped with full-load interrupters. Switches of 15 kV and 25 kV classes with individual phases mounted on wood crossarms or poles must be supplied with insulated interphase and control rods.cg-4April 2020cg - Switch, three-pole, group-operated(Factory Preassembled)ManufacturerAcceptable Mounting onStructuresVertical BreakType kVSide BreakType kVABBHorizontal (A)SLB-3(L)15-25Siemens#Horizontal (A)Vector(L)15-27Phase over phase (A)Vector(L) 15-27Vertical (A)Vector(L) 15-27Eaton (Kearney)Horizontal (A)M-FORCE15-35Phase over phase (A)M-FORCE15-35Vertical (A)M-FORCE15-35Hubbell (Chance)Horizontal (A)D7(L)15-27Phase over phase (A)D7(L) 15-27Vertical (A)D7(L) 15-27Horizontal (B)D7(L) 34.5Phase over phase (B)D7(L) 34.5Vertical (B)D7(L) 34.5Inertia EngineeringHorizontal (A)LBS(L)15-35Vertical (A)LBS(L)15-35Phase over phase (A)LBS(L)15-35S&C*Horizontal (A)Alduti(L) 15-25Alduti(L) 34.5 (200 kV BIL)Phase over phase (A)Alduti(L) 25Alduti(L) 34.5 (200 kV BIL)Vertical (A)Alduti(L) 15-25Alduti(L) 34.5 (200 kV BIL)Phase over phase (B)Alduti(L)34.5Alduti(L) 34.5Vertical (B)Alduti(L)34.5(L)Means gas or solid material full-load interrupters are accepted and available.(A)Not suitable for substation use.(B)For station and transmission use only. The steel crossarm base must be grounded with an adequate grounding connector. 200 kV BIL only.NOTES: Switches with factory-assembled crossarm type bases for distribution lines must have non-conducting crossarm type bases, non-conducting braces, and insulated interphase and control rods, except as otherwise noted.* Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5kV on request.# Both operating shaft and hookstick versions of switch accepted. Applies to both polymer and porcelain insulators.Conditional Listcg(1)July 2009cg - Switch, air, three-pole, group operatedManufacturerConditionsCleaveland/PriceType V2-C (15-69 kV) Vertical break, horizontal or vertical mountingType RL-C (15-69 kV) Single side break, horizontal or vertical mounting1. To obtain experience.2. Insulated interphase and control rods required on wood distribution structures.G & W Electric CompanyType MK-40A 15 kV through 345 kV(horizontal upright mounting)Type LPV, 3-pole 72.5-272 kV, 1200 amp., 1600 amp., 2000 amp., center sidebreak for horizontal mounting.1. To obtain experience.2. Insulated interphase and control rods required on 15 kV and 23 kV models used on wood structures.3. Steel interphase base required when mounted as in RUS Drawing TM-3.To obtain experience.Hubbell (Chance)Type ARSide-break, horizontal phase-over-phase, and vertical mounting, with non-conducting crossarm type base and insulated interphase and control rods, 15, 25 and 34.5 kV(grounded wye)To obtain experience.(L) Means full-load interrupter accepted and available.(VL) Means vacuum full-load interrupters are accepted and available.Conditional Listcg(1.1)July 2009cg - Switch, air, three-pole, group-operatedManufacturerConditionsPASCORVBP (15 - 230 kV)VBS (69 - 230 kV)Vertical break, vertical or horizontal mounting.Phase-over-Phase mounting(VBS, 69 - 115 kV only)SB (15 - 69 kV) Side break, vertical or horizontal mounting.CB (15 - 115 kV) Center break, vertical or horizontal mounting.CBSA (69 - 138 kV) Center Break Vee, vertical, horizontal, or phase-over-phase mounting. (Also accepted as a copper switch at 69 - 115 kV.)1. To obtain experience.2. Insulated interphase and control rods required on wood distribution structures.1. To obtain experience.2. Insulated interphase and control rods required on wood distribution structures.1. To obtain experience2. Insulated interphase and control rods required on wood distribution structures.To obtain experience.S & C*Line-rupter with SF6 interrupter. Horizontal mounted 115-230 kVOmni-Rupter #(L) Side-break, horizontal phase-over-phase, and vertical mounting, with non-conducting crossarm type base and insulated interphase and control rods, 15 kV and 25 kVTo obtain experience.To obtain experience.#Both operating shaft and hookstick versions of switch accepted.(L) Means full-load interrupter accepted and available.(VL) Means vacuum full-load interrupters are accepted and available.*Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5?kV on request.Conditional Listcg(1.2)July 2009cg - Switch, Air, Three-Pole, Group OperatedManufacturerConditionsSEECOGOABS (VL) Vacuum interrupter type 115-169 kVTo obtain experience.Southern States"Pole-Pak" 15-23 kVType ES; 15, 23 and 34.5 kV (horizontal upright models only)Type 57L sidebreak, 115-161 kV,600 and 1200 amp., horizontal uprightType CBL-T, 15-69 kV,1200 amp(center break, horizontal upright mounting)To obtain experience.1. To obtain experience.2. For 15 kV and 23 kV distribution lines, insulated interphase and control rod spacers required. See RUS Drawings M3-15 and VM3-16.3. NEMA insulators and steel interphase base required for transmission line structure as in TM3.4. Acceptable on steel substations 15 through 34.5?kV with NEMA insulators and uninsulated interphase rods.To obtain experience.1. To obtain experience.2. Insulated interphase and control rods required on 15 kV and 25 kV models used on wood structures.Travis SwitchgearMA-32512, 25 kV, 150 kV BIL, vertical break1. To obtain experience.2. Insulated interphase and control rods required when used on wood structures.(L) Means full-load interrupter accepted and available.(VL) Means vacuum full-load interrupters are accepted and available.ci-1July 2009ci - Clevis, thimbleRated StrengthManufacturer20,000 lbs.40,000 lbs.50,000 lbs.Joslyn (Flagg)PA271PA272B-cj-1August 2018cj - Pole Ground WireSoft annealed iron, BB Grade, class C galvanizing(For pole protection only)Size1.15 Ohms/1000 ft., max.Manufacturer Florida Wire and Cable3-wire, 5/16 inchIndiana Steel and Wire3-wire, 5/16 inchNational Strand Products3-wire, 5/16 inchSouthwire3-wire, 5/16 inchCopper, soft annealed solidASTM Specification B3Manufacturer(See page av-2)Aluminum (for above ground use only)Hard-drawnManufacturer(See page av-1)Aluminum Alloy (for above ground use only)ManufacturerTypeAlcan Cable6201American Electrical6201Southwire 6201Copper-Clad Steel, Annealed 40 percent ConductivityManufacturerSizesAFL CoppercladNo. 6, No. 4., No. 2Copperweld Bimetallics, LLC*No. 6 AWGNo 4 AWG Stranded (7x0680”)No. 4 AWGNo. 2 AWG Stranded (7x0860”)No. 2 AWG7 No. 10 AWG2/0 (19x0860” & 7x1379”)* Theft deterrent versions, both poly-jacketed and camouflaged are acceptable.Conditional Listcj(1)cj - Pole Ground Wire, alternative conductorManufacturer ConditionsConduGroundTo obtain experience.CG-7/16”CG-1”CG-1-1/2”CThor55LbGAP55LbGAP25Lbck-1July 2009ck - clamp, anchor rod bondingFor Standard and Drive Type RodsDiam. of RodType of Eye5/8"3/4"1"C & R ProductsSingleCRBC-1CRBC-1CRBC-1TwinCRBC-2CRBC-2CRBC-2Triple -CRBC-3CRBC-3Hubbell (Chance)SingleG5060G5060G5060TwinG5061G5061G5061Triple -G5063G5063JoslynSingle323032303230Twin323132313231Triple -32333233KortickSingleK3147K3147 -Twin -K3148K3148Triple -K3149K3149Line HardwareSingleRBC-100RBC-100RBC-100TwinRBC-200RBC-200RBC-200TripleRBC-300RBC-300MacLean (Continental)SingleUCG5060UCG5060 -Twin -UCG5061UCG5061Triple -UCG5063UCG5063For Power Installed Screw AnchorsC & R ProductsSingleCRBC-4CRBC-5-Hubbell (Chance)SingleG5067G5068-JoslynSingleJ26714J26715-Line HardwareSingleRBC-400RBC-500-cm-1June 2012cm - Insulator, SpoolServiceType:Secondary (Wet Process) Wet ProcessDry ProcessGroove Diameter:1-3/4"3"1-3/8"1-3/8"ANSI Class53-253-453-1NAEatonDE4S3DE5S3DE2S2DE2S1Gamma Insulators Corp.8442-708444-708441-70-Hughes2102---ICBICB 532ICB 534ICB 531-Joslyn-J0101AJ150AJ100AKortickK516K522K513K514MacLean (Continental)U205U31221U208 U207Porcelain Products (Knox)5101511951075207M.D. Henry Company, Inc.1082---Victor Insulators, Inc.2012, VI 26122026, VI 26262011, VI2611-cm-2July 7, 2020cm – Insulators, spool, composite/polymerANSI ClassManufacturer53-153-253-4Aluma-Form, Inc.INS‐53‐2Hendrix Wire and Cable-HPI-53-2-Hubbell (Chance)-C909-1032P- Preformed Line Products-IP-53-2-cp-1November 2014cp - Deadend, Compression TypeACSRConductor SizeAFLBurndy1/0Order by2/0ConductorType Y-W3/0Size and "4/0Stranding " "266.8 kcmil 18/1336.4 kcmil 18/1477 kcmil 18/1266.8 kcmil 26/72-piece336.4 kcmil 26/7alloyType Y-W477 kcmil 26/7compressionType YTW556.5 kcmil 26/7Type VES or"795 kcmil 26/7HES"954 kcmil 54/7"""Conductor Size Hubbell (Anderson)Hubbell (Fargo)Kearney/Eaton1/0VCD-50RSEDA-81291040002/0thruSEDA-7729 thru 3/0VCD-61RSEDA-7829104000-034/0"SEDA-7929"266.8 kcmil 18/1VCD-80-R336.8 kcmil 18/1VCD-80-R477 kcmil 18/1VCD-812-R266.8 kcmil 26/7VCD-831-1-RMUni-Grip104000-05336.4 kcmil 26/7VCD-831-1-RMone diethru477 kcmil 26/7VCD-832-2-RMsystem104000-14556.5 kcmil 26/7VCD-833-3-RMOrder by"795 kcmil 26/7VCD-835-4RMconductor size954 kcmil 54/7VCD-835-4RMand strandingNOTE:These compression deadends are acceptable when installed using tools and dies in accordance with the deadend manufacturer's recommendations.cp-1.1September 2014cp - Deadend, Compression TypeACSRConductor SizeDMC Power1/0-2/0-3/0-4/0-266.8 kcmil 18/1Order by Conductor Size and Kit Pieces.336.4 kcmil 18/1477 kcmil 18/1266.8 kcmil 26/7One-piece336.4 kcmil 26/7Alloy477 kcmil 26/7Swage556.5 kcmil 26/7Full Tension Compression Type795 kcmil 26/7954 kcmil 54/7NOTE:These compression deadends are acceptable when installed using tools and dies in accordance with the deadend manufacturer's recommendations.cp-2July 2009cp - Deadend, Compression TypeACSRAdjustableHubbell (Fargo)Order by conductor size and strandingAluminum Alloy(6201 and 5005)Conductor Size:4 thru 4/0Hubbell (Anderson)Type VCD, Order by conductor sizeCopperConductor Size:2 x 346National Tel. Supply71-258/3X71-204-P71-162-JCopperweld-CopperConductor Size:6A8ANational Tel. Supply71-6A-P71-8A-PNOTE: These deadends are acceptable when installed with tools and dies in accordance with the deadend manufacturer's recommendations.Conditional Listcp(1)July 2009cp - Deadend, compression typeManufacturerConditionsBurndyAWAC 4-4/3 YTW7M10TAWAC 2-4/3 YTW7M9TAWAC 1/0-4/3 YTW7M7TTo obtain experience.NOTE: These deadends are acceptable when installed with tools and dies in accordance with the deadend manufacturer's recommendations.Conditionalcp(2)April 2015cp –Dead-end, compressionFor use with High Temperature ConductorsManufacturerConditionsAFL Dead-end fittingTo be used with 3M High Temperature Conductors ACCR (Aluminum Conductor Composite Reinforced)To obtain experience.Use high temperature accessories approved by the manufacturer and accepted by RUSBurndy/HubbellDead-end AssemblyTo be used with CTC Global High Temperature Conductors ACCC (Aluminum conductor Composite Core)Same as above.Preformed Line Products (PLP) Thermolign SuspensionTo be used with 3M High Temperature Conductors ACCR (Aluminum Conductor Composite Reinforced)Same as above.NOTE: These compressions are acceptable when installed using tools and dies in accordance with the conductor’s manufacturer's recommendations.cq-1July 2009cq - Deadend, Secondary(For use on secondary deadends only)CopperOffset CompressionConductor Size:46National Telephone Supply91-204-P91-162-JCopperweld-CopperOffset CompressionConductor Size:6A8ANational Telephone Supply91-6A-P91-8A-PCopperweld-CopperAutomatic DeadendConductor Size:6A8AHubbell (Fargo)GD-113GD-112MacLean (Reliable)47FD-cr-1July 2009cr - Bracket, Angle SuspensionApplicable Specifications: "RUS Specification for Angle Suspension Brackets," DT-4Manufacturer.Distribution5/8" Diam.Transmission3/4" Diam.Hubbell (Chance)-5728Joslyn-J7936KortickK6231K6230MacLean (Continental)U545U546cs-1July 2009cs - Bracket, Pole Top PinFor Transmission and 24.9/14.4 kV DistributionApplicable Specifications: "RUS Specifications for Pole Top Brackets for Channel Type Pins," D-14Hubbell (Chance)2157KortickK8130MacLean (Continental)U36690ct-1July 2009ct - Plate, Double ArmingTransmissionManufacturer4" x 1/2" x 24"4" x 1/4" x 17"Hubbell (Chance)58445819JoslynJ1600-KortickK1454K1465Line Hardware-DAP-17MacLean (Continental)U4117-cu-1January 2016cu – 26 inch Brace, crossarm (side-mounted)Manufacturer .Douglas Fir orSouthern Yellow PineApitongFiber Reinforced PlasticAluma-Form2-AF626-Barfield Mfg.BAB-626--Brooks 58128--Dulmison--CAB-28Hatheway Patterson7026-Hughes Brothers2023-533JoslynJ5526-MacLean (Continental)--CRB-28Geotek (PUPI)--B3818SMNote: Braces listed above have 26-inch hole spacing. They are to be used in place of the flat steel braces previously listed on page h.cu-2January 2016cu – 60 inch Brace, crossarm (underarm)Span, inches:6060Drop, inches:1830Manufacturer .Aluma-Form60186030Barfield Mfg.BAR-6018BAR-6030Brooks 446-60-18446-60-30Cox IndustriesC-6018C-6030Dis-TranDT-60R-Hatheway Patterson320-R325-RHughes Brothers 2045-CC2045-DJoslynJ4760RJ4730RWPennington1501815030Geotek (PUPI)*B6018BMB6030BMUtilities Structures Eng. Inc.CU-60-18CU-60-30*Denotes Fiber Reinforced Plastic, all others are woodcu-3January 2016cu – Bracket, Crossarm, center mountManufacturerCatalog #Brooks Manufacturing Co.REA Type 01 FSNP-BBAREA Type 02 FSNP-BBAREA Type 03 FSNP-BBAREA Type 04 FSNP-BBAREA Type 05 FSNP-BBAREA Type 14 FSNP-BBAREA Type 22 FSNP-BBAcx-1July 2009cx - Splice, oval tubeCopperConductor Size: 0 x 72 x 346National Tel. Supply 464463459457Copperweld-CopperConductor Size:6A8ANational Tel. Supply460459cy-1November 2014cy - Splice, CompressionACSRConductor SizeAFLBlackburnBurndy4 6/12-piece"Unisplice"4 7/1OrderType RC(1-piece)2 6/1by1-pieceor Y-S2 7/1ConductorOrder(2-piece)1/0SizebyOrder by2/0andConductorConductor3/0StrandingSizeSize and4/0"andStrandingStranding266.8 kcmil 18/1336.4 kcmil 18/1477 kcmil 18/1266.8 kcmil 26/72-piece2-piece336.4 kcmil 26/7CompressionType YTS477 kcmil 26/7Alloy Type"556.6 kcmil 26/7CJ"795 kcmil 26/7"954 kcmil 54/7"ConductorSizeHubbell(Anderson)Hubbell (Fargo)Kearney/EatonVC-36R2 pc1 pc4 6/1VC-36R--OH4-61-71AS4 7/1VC-36R--OH4-61-71AS2 6/1VC-36R--OH2-61-71AS2 7/1VC-50R--OH2-61-71AS1/0VC-50RTJA-8129OH1/0-61AOH1/0-61AS2/0VC-61RTJA-7729OHR2/0-61A-3/0VC-61RTJA-7829OHR3/0-61A-4/0-TJA-7929HR4/0-61A-VC-80-R266.8 kcmil 18/1VC-80-R---336.4 kcmil 18/1VC-90-R---477 kcmil 18/1----VC-831-1-RM266.8 kcmil 26/7VC-831-1-RMUni-gripHR-266-267A-336.4 kcmil 26/7VC-832-2-RMone dieHR336-267A-477 kcmil 26/7VC-833-3-RMsystemHR-477-267A-556.5 kcmil 26/7VC-835-4RMOrder byHR-556-267A-795 kcmil 26.7VC-835-4RMconductor size--954 kcmil 54/7-and stranding--NOTE: These splices are acceptable when installed with tools and dies in accordance with the splice manufacturer's recommendations.cy-1.1July 2009cy - Splice, CompressionACSRConductor SizeNat. Tel. SupplyHomacESP4 6/1"Nicopress""TensionFTR-44 7/1(1-pc. or 2-pc.)splicer"FTR-42 6/1Order by Conductor(1-piece orFTR-22 7/1Size and2-pieceFTR-2.51/0StrandingOrder by FTR-1/02/02-pc.ConductorFTR-2/0.53/0"Size andFTR-3/04/0"StrandingFTR-4/0266.8 kcmil 26/7"2-pc.-336.4 kcmil 26/7""-477 kcmil 26/7""-556.5 kcmil 26/7""-795 kcmil 26/7---954 kcmil 54/7---NOTE: These splices are acceptable when installed with tools and dies in accordance with the splice manufacturer's recommendations.\scy-2July 2009Splice, CompressionCopper and Copperweld-CopperConductorSizeBurndyHomacHubbell (Anderson)Kearney/EatonNational Tel. Supply6 cuYDS6WJ2C3VCC-28OH6C1-162/J4 cuYDS4WL2C5VCC-28OH4C1-204/P2 x 3 cuYDS2C-3S2C7-OH2-3CX1-258/3X0 x 7 cuYDS25U2C9-OH1-7C1-325/7F68A CWCYDS8KTL2E1VCC-28OHR8ACW1-8A-P6A CWCYDS6KTL2E3VCC-28OHR6ACW1-6A-P4A CWCYDS4KTQ2E5VCC-37OHR4ACW1-4A-X2A CWC-U2E7VCC-43--NOTE: These splices are acceptable when installed with tools and dies in accordance with the splice manufacturer's recommendations.cy-3September 2014cy - Splice, compression(one-piece)(For 6201 and 5005 Aluminum Alloy Conductors)Conductor SizeBurndyBlackburnHomacHubbell (Anderson)#4thru4/0"Unisplice"Type RC"Tension Splicer"Type VC-ROrder by ConductorOrder by ConductorOrder by ConductorOrder by ConductorSize and StrandingSize and StrandingSize and StrandingSize and StrandingESPType FTROrder by ConductorSize and Stranding336.4thru2500 KcmilDMC PowerFull Tension Compression One-piece (swage) High Strength Type 6000 Series.Order by Conductor Size & Kit pieces.NOTE: These splices are acceptable when installed with tools and dies in accordance with the splice manufacturer's recommendations.Conditional Listcy(1)November 2014cy - Splice, compression1-piece splice for ACSRManufacturerConditions*AFL"Jiffy Joint"To obtain experience.1-piece splice for AWACBurndyAWAC 4-4/3 YDS7M10TAWAC 2-4/3 YDS7M9TAWAC 1/0-4/3 YDS7M7TTo obtain experience.*Satisfactory for use with 6201 and 5005 all aluminum alloy conductor through 4/0 and 19 strand conductors of sizes 266.8 kcmil and 477 kcmil.NOTE: These splices are acceptable when installed using tools and dies in accordance with the splice manufacturer's recommendations.Conditionalcy(2)April 2015cy -Splice, compression, high temperatureFor use with High Temperature ConductorsManufacturerConditionsAFLFujikura Limited (AFL)Splice, CompressionTo be used with 3M High Temperature Conductors ACCR (Aluminum Conductor Composite Reinforced) To obtain experience.Use high temperature accessories approved by the manufacturer and accepted by RUSBurndy/HubbellSplice, compressionTo be used with CTC Global High Temperature Conductor, ACCC (Aluminum Conductor Composite Core)Same as above.Preformed Line Products (PLP) Thermolign Full Tension SpliceTo be used with 3M High Temperature Conductors ACCR (Aluminum Conductor Composite Reinforced) Same as above.NOTE: These splices are acceptable when installed using tools and dies in accordance with the conductor’s manufacturer's recommendations.cz-1November 2014cz - Splice for Steel Strand (Overhead Ground Wire)CompressionSingle Sleeve OnlyHigh Strength SteelExtra High StrengthAluminum Clad Steel3/8"7/16"5/16"3/8"7/16"7 No. 9 AWG7 No. 8 AWG7 No. 7 AWGAFL4914.3864916.453BurndyYTS375EYTS438EYDS7M9TYDS7M8TYDS7M7THubbell (Fargo)81l4258ll63081l22281l42581l630811425811427811630KearneyHR-3/8-3-7SNational.Tel.Supply5-7/12OG925-7/145J22Steel and Aluminum SleevesHomac28414(Two piece)AutomaticMacLean (Reliable)50025043504150425043504250425043Bolted TypeElectrolineGD-537Formed TypeHelical Line ProductsHS-310-3/8"HS-311-7/16"Hubbell (Chance)10SS 3/8C16SS 7/16C6SS 5/16C10SS 3/8C16SS 7/16Cda-1July 2009da - Bracket, insulatedBracket withoutInsulatorBracket with 1-3/4” Spool InsulatorBracket with 3” Spool InsulatorHubbell (Chance)03270327-C909-10320327-C909-1304Hughes Brothers1077LI1077SI1077IJoslynJ1300--KortickK9278K9081K9082dh-1January 2012dh - Ground, pole(For system grounds, see ground rods on page ai)ManufacturerCatalog NumberGalvanized Steel Plate With Insulated Copper Lead(For connecting to a copper or aluminum ground wire above ground.)Line HardwarePGPS-56CL8Galvanized Steel Plate with Connector(For connecting to a galvanized iron ground wire)Line HardwarePGPS-56CCopper PlateBlackburnGP-100DrabcoD 101EritechEGP-100Galvan Industries, Inc.GP-100Homac5575JoslynJ9196Line HardwarePGPC-56UtilcoUGP-72** Plate area exposed to the soil is at least 0.046 m2 or 0.5 ft2; Plate thickness is at least 1.5 mm or 0.06 in.dh-2February 2020dh - Ground, poleAlternative Materials(For system grounds, see ground rods on page ai)ManufacturerCatalog NumberDescriptionSAECD-2W-1214” ConduDisc? with 12 ft. of #2 CopperweldCD-2WC-1214” ConduDisc? with 12 ft. of #2 Copperweld CamoCD-4C-1214” ConduDisc? with 12 ft. of #4 CopperCD-2C-1214” ConduDisc? with 12 ft. of #2 CopperCD-1/0C-1214” ConduDisc? with 12 ft. of 1/0 CopperCD-2/0C-1214” ConduDisc? with 12 ft. of 2/0 CopperCC25Conducrete? 25 55Conducrete? 55 lb.CF7000ConduFlow 5ga1.dl-1July 2009dl - Pipe Spacer3/4" diameter x 1-1/2" lengthManufacturerCatalog NumberHubbell (Chance)2237JoslynJ2031MacLean (Continental)U36695dm-1April 2016dm - Bracket, transformer(For cluster mounting of two or three transformers on pole)ManufacturerTransformer Size, kVABand TypeThrough Bolt TypeAluma-Form3-506M3-63MW-24-M75-10015M3-611MW-24Barfield Manufacturing Co.3-50BMAC-366-75-100BMAC-3156-Dixie3-25-DW-5037-1/2-50-DW-5075-100-DW-167Hubbell (Chance)3-50C6M3-6C3MW24M75-100C15M3-6C11MW24LHughes3-25-302137-1/2-50-302075-100-3020 with adapter plates and back plateJoslyn3-25-J686537-1/2-50-J686475-100-J6866MacLean Power Systems3-50-M3MW-24-M75-100M15M3-6M11MW-24Turner3-25-305-2537-1/2-50-305-10075-100-305-100For mounting of two transformersAluma-Form3-100-DM-4M23-50-DM-2M2Hubbell (Chance)3-100-C212-0001Hughes3-50-3022MacLean Power Systems3-50-MDM-2M2Turner3-50-205-25dp-1April 2014dp - Clamp, ground wireTransmissionFor grounding steel towers and substation structuresBolt Included(For use with copper ground wires)ManufacturerCatalog NumberTE Connectivity - Energy81416-3Penn-UnionGH-30-C-A1Royal Switchgear12202-T (Type LCS)Hubbell Power SystemsGC143AG2For use in:Pole Grounding Assembly TM-9Capacitor Assemblies M9-11, M9-12 and M9-13ManufacturerFor 5/8" BoltFor 3/4" BoltJoslynJ1163J1164MacLean (Continental)SBL-33-Conditionaldp(1)January 2010dp – Clamp, ground wireTransmissionFor grounding steel towers and substation structuresBolt Included(For use with copper ground wires)ManufacturerCatalog NumberConditionsDMC PowerGC910B-***T(single hole pad for copper wire)To obtain experience.For use in:Pole Grounding Assembly TM-6, TM-7, TG-15, TG-17, TG-25, TG-27, TG-28, TG-29, TG-35Capacitor Assemblies Y3.1, Y3.2, Y3.3, Y3.4dq-1July 2009dq - Eye Screw, EllipticalFor use in deadending triplex type service cable, Drawing K2.3.ManufacturerCatalog NumberJoslynJ8930dr-1June 2013dr – Clevis, conduit, insulatedFor use in deadending triplex service cable, Drawing K3.2.Applicable Specifications: “RUS Specifications for Insulated Conduit Clevises and Conduit Wire-holders for Pipe Mast Deadends,” D-16ManufacturerCatalog No.JoslynJ0311*Hubbell Power Systems, Inc.DW8M1*Insulator not included. See page cm for spool insulator.ds-1February 2015ds - Wireholder, conduitFor use in deadending open wire services on pipe masts, Drawing K3.1.Applicable Specifications: "RUS Specifications for Insulated Conduit Clevises and Conduit Wireholders," D16ManufacturerCatalog NumberHubbell (Chance)C207-0075, C2070144Conditional Listds(1)July 2009ds - Wireholder, conduitManufacturerConditionsJoslynJ0588Z (nylon alloy)To obtain experience.dt-1July 2009dt - Deadend, serviceFor deadending triplex type service cable, Drawing K2.2.Catalog NumberManufacturerACSR SizeWedge TypeFormed TypeBlackburn4W62-1-Dulmison4-SG05702-SG07351/0-SG09152/0-SG1020Helical Line Products4-HSG-5142-HSG-5181/0-HSG-522MacLean (Reliable)47195-27187-1/07287-Penn-Union4WDC-2S-Preformed Line Products4-SG-45022-SG-45041/0-SG-45062/0-SG-45073/0-SG-45084/0-SG4509du-1July 2009du - Link, ExtensionDISTRIBUTIONManufacturerCatalog NumberJoslyn (Flagg)PA319Hubbell (Chance)C207-0112MacLean (Bethea) LCE-14MacLean (Continental)CEL-14TRANSMISSION(25,000 lbs. min. strength)JoslynJ26082MacLean (Bethea)ASM 7209-l-BCGuy Extension Link(For "H" Structure)ManufacturerOne Guy AttachmentTwo Guy AttachmentJoslynJ22421J26025NOTE: The distribution extension links may be substituted for anchor shackle (Item bo), eye bolt (Item o) and eye nut (Item aa) for both small and large conductor drawings shown in RUS Form 803 and RUS Bulletin 50-3 at the option of the owner.Conditional Listdu(1)July 2009du - Connecting Links for Pole BandsConditions - To obtain experience.in conjunction with pole bands [Item fv(1)]For Use With Medium Duty Pole BandsManufacturerLink toInsulatorsSizeMinimumStrength RatingHughes Bros.31763/8"x3"x9-1/2"25,000 lbs.JoslynJ260343/8"x3"x9-1/2"25,000 lbs.Link to GuyHughes Bros.31543/8"x2"x9-1/2"36,000 lbs.JoslynJ260353/8"x3"x9-1/2"36,000 lbs.For Use With Heavy Duty Pole bandsManufacturerLink toInsulatorsSizeMinimumStrength RatingHughes Bros.31573/8"x3"x12"36,000 lbs.JoslynJ26035 - 23/8"x3"x9-1/2"36,000 lbs.Link to GuyHughes Bros.31573/8"x3"x12"51,000 lbs.JoslynJ260371/2"x3"x12"51,000 lbs.dy-1June 2010dy - Bolt, eye, double armingApplicable Specification: ANSI C135.4, "Standards for Galvanized Ferrous Eye Bolts and Nuts for Overhead Line Construction."Applicable Sizes 5/8 inch, 14 through 26 inch length 3/4 inch, 14 through 26 inch lengthThe following manufacturers have shown compliance with the applicable specifications:Allied Bolt, Inc.Hubbell (Chance) Joslyn Manufacturing CompanyKortick Manufacturing CompanyMacLean (Continental)dz-1February 2011dz - Clip, Guy WireManufacturer5/16"3/8"7/16"1/2"Hubbell (Chance)6453645464556456MacLean (Continental)U4953U4954U4955U4956ea-1September 30, 2020ea - Insulator and Stud, line post, ceramic(Non-ANSI Class)DISTRIBUTION (RUS Minimum Requirements)System voltage, kV:12.5/7.212.5/7.224.9/14.4Leakage, inches:7-1/21015Cantilever strength (pounds):187518751875Flashover, dry, kV:657095Flashover, wet, kV:405065Gamma Insulators Corp.7" Stud---1-3/4" Stud4315PX-704320PX-704327PX-70Grupo IUSANo StudP-2025P-2025-Lapp7" Stud1-3/4" Stud4415P4315P4420P4320P4427P4327PNewell Porcelain7" Stud1-3/4" Stud--43570-704043570-701047101-704047101-7010Porcelain Products (Knox)7" Stud1-3/4" Stud5115-65105115-65005120-65105120-65005127-65105127-6500ea-1.1September 30, 2020ea - Insulator and Stud, line post, ceramic(ANSI Class)DISTRIBUTION or TRANSMISSIONSystem voltage, kV:12.5/7.212.5/7.224.9/14.4Leakage, inches:7-1/21015Cantilever strength (pounds):187518751875Flashover, dry, kV:657095Flashover, wet, kV:405065ANSI Class:57-257-357-4System voltage, kV:2234.546Gamma Insulators Corp.7" Stud---1-3/4" Stud9335X-709345X-70-ICB7" Stud1-3/4" Stud-ICB 57-2-ICB 57-3--Lapp7" Stud1-3/4" Stud943593359445934594559355Newell-PSN7" Stud1-3/4" Stud37620-704037620-701041640-704041640-701041650-704041650-7010Porcelain Products (Knox)7" Stud1-3/4" Stud5135-65125135-65025145-65125145-6502--ea-2September 30, 2020ea - Insulator, line post, ceramic(ANSI Class)ANSI Class:57-157-257-357-4Eprecsa USA, LLC13PD22PD33PD-ea-3September 30, 2020ea - Insulators, line post, ceramic, horizontalTransmissionManufacturer34.5 kV69 kV115 kVLappF-4745F-4788F-70147Locke-LS025l3LS050l3Newell-PSN43740-770043790-770047043-7700-Victor Insulators, Inc.6235662359-Conditional Listea(1)September 30, 2020ea - Insulator, line post, ceramic(non-ANSI Class)ManufacturerConditionsVictor Insulators, Inc.2120 (12.5/7.2 kV)2127 (24.9/14.4 kV)62055 (22 kV)62056 (34.5 kV)To obtain experience.Conditional Listea(3)September 30, 2020ea - Insulators, line post, composite, horizontal TransmissionPolymer for Wood and Fiberglass Transmission Poles(clamp end fittings and rigid curved base or bendable curved base for use for round poles)Voltage:34.5 kV46 kV69 kVANSI Class:51-3451-3551-36Rated SCL (lbs.):240024002400Rod diameter (inches):ManufacturerConditionsHubbell80S0460100-80S0690100To obtain experience.K-Line Insulators KL46SHG12KL69SHPG12KL69SHP1GPolymer for Wood and Fiberglass Transmission Poles(clamp end fittings and rigid curved base or bendable curved base for use for round poles)Voltage:115 kV138 kV138 kVANSI Class:250-54250-60250-66Rated SCL (lbs.):265023002000Rod diameter (inches):2-1/22-1/22-1/2ManufacturerConditionsTo obtain experience.Notes: Flat base for use with flat surface polesUniversal base for flat as well as curved polesTwo hole blade end fitting available.Conditional Listea(3.1)September 30, 2020ea - Insulators, line post, composite, horizontalTransmissionPolymer for Steel and Concrete Transmission Poles(with flat base or curved base for centrifugally spun concrete poles)Voltage:34.5 kV and 46 kV69 kV115 kV138 kV138 kVANSI Class:51-36250-41250-60250-66250-75Rated SCL (lbs.):24003300265023002000Rod diameter (inches):2-1/22-1/22-1/22-1/2ManufacturerConditionsTo obtain experience.Polymer for Steel and Concrete Transmission Poles(with flat base or curved base for centrifugally spun concrete poles)Voltage:115 kV138 kV138 kVANSI Class:250-60250-66250-75Rated SCL (lbs.):450039003500Rod diameter (inches):3.03.03.0ManufacturerConditions* Notes: Flat base for use with flat surface polesUniversal base for flat as well as curved polesTwo hole blade end fitting available.Conditional Listea(4)September 30, 2020ea - Insulator, line post, compositeManufacturerANSI ClassConditionsAdvanced Rubber ProductsVertical To obtain experience.ARP-LPCN-15SK51-1CARP-LPFN-15SK51-1FARP-LPFN-25SK51-2FARP-LPFN-35SK51-3FARP-LPFN-46SK51-4FHendrix Molded ProductsVertical To obtain experience.HPI-LP-9C51-1CHPI-LP-9F51-1FHPI-LP-11C51-2CHPI-LP-11F51-2FHPI-LP-14FS/FA51-4FHPI-LP-16F51-4FHubbell Power SystemsVertical To obtain experience.80S0150F09 (15kV, without Stud)80S0250F09 (25kV, without Stud)80S0280F09 (35kV, without Stud)K-Line InsulatorsVertical To obtain experience.KL 15STFL (12.5/7.2 kV, with 7” Stud)KL 15STFS (12.5/7.2 kV, with 13/4” Stud)KL 28STFL (24.9/14.4 kV, with 7” Stud)KL 28STFS (24.9/14.4 kV, with 13/4 Stud)KL 35STFL (with 7” Stud)513FKL 35STFS (with 13/4” Stud)513FKL 46STFL (with 7” Stud)514FKL 46STFS (with 13/4” Stud)514FHorizontal To obtain experience.KL 46SHG (34.5 kV)KL 28SKG109 (24.9/14.4kV)51-32EMC Pacific PTY LTDVertical To obtain experience.LPI36-1100 PHCEP (15kV/ 25 kV/ 35kV, with 7” or 1-3/4” Stud)Conditional Listea(4.1)September 30, 2020ea - Insulator, line post, compositeManufacturerANSI ClassConditionsGAMMA ‐ CoronaVertical To obtain experience.PL01551-1FPL02851-2FPL03551-3FPL04551-4FConditional Listea(5)September 30, 2020ea - Insulator, line post, composite, clampManufacturerANSI ClassConditionsHendrixHorizontal and Vertical To obtain experience.HPI-CLP-1551-12 & 22HPI-CLP-1751-13 & 23HPI-CLP-2051-14 & 24eb-1September 2010eb - Bracket, Pole TopFor Post type InsulatorsDISTRIBUTIONHubbell (Anderson) (14.4 or 7.2 kV)84324-2000Hubbell (Chance) (14.4 or 7.2 kV)1B4Joslyn (Flagg) (14.4 or 7.2 kV)P526Lapp (Line Ware) (14.4 or 7.2 kV)304043Line Hardware (l4.4 or 7.2 kV)PTIB-375AMacLean (Continental) (14.4 or 7.2 kV)PTB-55-8M.D. Henry Company, Inc. (14.4 or 7.2 kV)PT-8RTRANSMISSIONHubbell (Chance)1B4Joslyn (Flagg)P532Lapp (Line Ware)304044MacLean (Continental)PTB-66Hec-1July 2009ec - Bracket, Offset NeutralHubbell (Chance)C206-0004JoslynJ2352ed-1July 2009ed - Support, overhead ground wireApplicable Specifications: "RUS Specifications for Overhead Ground Wire Support Brackets," T-2Pole top diameter, inches6-88-1010-12Hubbell (Chance)-54325432Hughes Brothers-2859-122859-14Joslyn-J6394J6395KortickK3580K3581K3582MacLean (Continental)UC1238UC1239UC1240ef-1July 2009ef - Bolt, clevisApplicable Specifications: "RUS Specifications for Clevis Bolts," DT-7Dia. (Inches)8”10”12”14”Hubbell (Chance)5/8158081581015812158143/415828158301583215834Joslyn5/8J7808J7810J7812J7814eg-1September 2011eg - Plate, crossarm reinforcingTRANSMISSIONFor 5-5/8" x 7-3/8" crossarmManufacturerCatalog NumberHubbell (Chance)4047Hughes Brothers1113.88MacLean (Continental)U3838Brooks Manufacturing Co.REA Type 01 NPREA Type 02 NPREA Type 03 NPREA Type 04 NPREA Type 05 NPREA Type 05M NPREA Type 14 NPREA Type 22 NPDIS-TRAN Wood Products, LLCREA Type 01EPREA Type 02EPREA Type 03EPREA Type 04EPREA Type 05EPREA Type 05MEPREA Type 12EPREA Type 14EPREA Type 16EPREA Type 21EPREA Type 22EPREA Type 31EPREA Type 32EPREA Type 41EPREA Type 42EPeh-1July 2009eh - Hook, ballManufacturerCatalog NumberJoslyn (Flagg)13400Hubbell (Anderson)HB-30Lapp7055Lindsey3310Line HardwareBH-30MacLean (Bethea)BH-5ei-1July 2009ei - Clamps, suspension with socket eyeACSR with Straight or Formed Armor RodsAWGkcmil1/0 & 2/03/04/0266.8336.4477556.5795954Iron or Steel ClampsHubbell (Anderson)MS-82-S--MS-104-SMS-104-S----------Hubbell (Chance)FGW4S---------- ------Lapp305743S----------------MacLean (Bethea)FS-83-S----------------ACSR with Straight or Formed Armor RodsAWGkcmil1/0 & 2/03/0 & 4/0266.8336.4477556.5795954Aluminum Alloy ClampC & RCRSC-1SCRSC-2SCRSC-3SCRSC-3S--------Dulmison--HSUHSUHSUHSUHSUHSUHSUHubbell (Anderson)HAS-85-SHAS-104-SHAS-104-SHAS-118-SHAS-139-SHAS-147-SHAS-182-SHAS-182-SLapp306029S306030S306030S306031S306032S------*Preformed--AGSAGSAGSAGSAGSAGSAGSMacLean (Bethea)LS-1-SLS-2-SLS-2-SLS-3-SLS-4-SLS-6-SLS-7-SLS-8-S*Clevis type available.\sConditional Listei(1)July 2009ei - Clamps, suspension with socket eye - cushionedCondition: To obtain experienceACSR with Straight or Formed Armor Rodskcmil266.8336.4477556.5795954*PreformedCGS-1100CGS-1102CGS-1105CGS-1106CGS-1110CGS-1112*Order with socket-eye fitting.Conditionalei(2)July 2009ei - Clamps, suspension with socket eye - cushionedFor use with High Temperature ConductorsManufacturerConditionsPreformed Line Products (PLP) Thermolign SuspensionTo be used with 3M High Temperature Conductors ACCR (Aluminum Conductor Composite Reinforced) 1. To obtain experience.2. Use high temperature accessories approved by the manufacturer and accepted by RUSNOTE: These clamps are acceptable when installed using tools and dies in accordance with the conductor’s manufacturer's recommendations.ej-1July 2009ej - Clamps, deadend with socket eyeACSRAWGkcmil2/0 to 4/0266.8336.4477556.5795954Iron or Steel Clamps (requires armor tape or liner) Hubbell (Anderson)-80445-200080445-2000---- Aluminum Alloy Clamps (do not require armor tape or liner)Anderson/HubbellSD-57-SSD-70-SSD-70-SSD-86-SSD-86S----C & RCR-10-60SCR-20-60SCR-20-60S--------Lapp305757S305758S305759S305760S------MacLean (Bethea)ADE-21-SADE-22-SADE-23-SADE-24-SADE-24-SADE-2526-SADE-2526-SNOTE: When used with clevis-type insulators for large conductors on distribution lines, order clamp with clevis eye.Conditionalej(1)August 2014ej - Clamps, dead-end with socket eyeFor use with High Temperature ConductorsManufacturerConditionsPreformed Line Products (PLP) Thermolign Dead-endTo be used with 3M High Temperature Conductors ACCR (Aluminum Conductor Composite Reinforced) AFLCompression Dead-endTo be used with 3M High Temperature Conductors ACCR (Aluminum Conductor Composite Reinforced) 1. To obtain experience.2. Use high temperature accessories approved by the manufacturer and accepted by RUS1. To obtain experience.2. Use high temperature accessories approved by the manufacturer and accepted by RUSNOTES:When used with clevis-type insulators for large conductors on distribution lines, order clamp with clevis eye.These clamps are acceptable when installed using tools and dies in accordance with the conductor’s manufacturer's recommendations.ek-1September 2010ek - LocknutsMF TypeFor Bolt Diam., in.:3/81/25/83/47/8Allied Bolt, Inc.2201622009220122201322014Hubbell (Chance)35103511351235133514Hughes BrothersMF30MF50MF60MF70 --JoslynJ8581J8582J8583J8584J8584-1/2KortickK1065K1066K1067K1068 --Line HardwareSLN38SLN50SLN58SLN34SLN78MacLean (Continental)U4920U4921U4922U4923U4924el-1July 2009el - SectionalizerManufacturerTypeEatonGH (with crossarm mounting bracket KA27G)Conditional Listel(1)November 2016el - SectionalizerManufacturerConditionsEatonSectionalizer, three-phase Type GN3Sectionalizer with125 kV BIL accessory Type GH, 15 kV, single phase*Sectionalizer, three-phase Type GN3E14.4 kV, 200 amp max.*Sectionalizer, three-phase Types GV and GVC 14.4 kV, 400 amp. max.*Sectionalizer, three-phase Types GW and GWC 34.5 kV, 400 amp. max.To obtain experience.1. To obtain experience.2. For use on single-phase taps of 24.9/14.4 kV multi- grounded wye systems.To obtain experience.To obtain experience.To obtain experience.General ElectricSectionalizer, single-phase cutout-type - 15 kV and 25 kV Model 9F41FTo obtain experience.HubbellSectionalizer, Single-Phase Type CRSSingle-Phase, Cutout Type15 kV, 95 kV BIL 200 amp max.27 kV, 125 kV BIL 200 amp max.38 kV, 150 kV BIL 200 amp max.Sectionalizer, Single-Phase Type PRSSingle-phase, Cutout Type with and withoutloadbreak accessory15 kV, 110 kV BIL 300 amp max. cont.27 kV, 125 kV BIL 300 amp max. cont.38 kV, 150 kV BIL 300 amp max. cont.38 kV, 170 kV BIL 300 amp max. cont.To obtain experience.To obtain experience.JoslynSectionalizer, three-phase, 15 kV, 400 and 600 amperes 25 kV, 600 amperes Model VBM with VT or RS controlTo obtain experience.*NOTE: Ratings greater than 100 ampere for 12.5/7.2 kV application and greater than 200 ampere for 24.9/14.4 kV application are acceptable only with ground trip device. NOTE: Cutout type sectionalizers may also be used with cutout frames listed on pages af-1 and ax-1. Consult manufacturer for application.em-1November 2013em - Brace, crossarm, special(angle alley arm)DISTRIBUTION15" span, 14" drop; 1-1/2" x 3/16"KortickK1978MacLean (Continental)U5514TRANSMISSION30” Span x 20” Drop42” Span x 27” DropHubbell (Chance)-6999Hughes BrothersAS-2309-BAS-2309-AKortickK1975K1976MacLean (Continental)U5509U5510Conditional Listeq(1)July 2009eq - Narrow Profile Brackets and Special Arm AssembliesMETAL BRACKETSManufacturerConditionsDixieDeadend bracket assembly D21142 for 12.5/7.2?kVDeadend bracket assembly D21144 for 24.9/14.4?kV1. To obtain experience.2. For use only in scenic areas and locations where right-of-way is limited.3. Not to be used where conductor galloping may be expected.Hubbell (Anderson)Standoff bracket, COB-E-180-TGLSame as above.Hubbell (Chance)Single post insulator bracketsC206-0209 for 12.5/7.2 kV construction onlyC206-0010 for 24.9/14.4 kV constructionDeadend bracket assembly, C206-0179Deadend bracket assembly, C206-0211 for 24.9/14.4 kV constructionSame as above.Joslyn (Flagg)Standoff bracket, PA619BSame as above.MacLean (Continental)Standoff bracket IACB-18-5Same as above. Conditional Listeq(1.1)September 2010eq - Narrow Profile Brackets and Special Arm AssembliesMETAL BRACKETSManufacturerConditionsJoslynSingle post insulator brackets24840.1, for 12.5/7.2 kV construction only24840.2, for 24.9/14.4 kV construction1. To obtain experience.2. For use only in scenic areas and locations where right-of-way is limited.3. Not to be used where conductor galloping may be expected.MacLean (Bethea)Single post insulator bracket, HBF-10-9-GCStandoff bracket VIB3-18-GCSame as above.M.D. Henry Company, Inc.Single post insulator bracket, SAB-3-18-GCSame as above.Conditional Listeq(2)October 2009eq - Narrow Profile Brackets and Special Arm AssembliesFIBERGLASS REINFORCED PLASTICFor 12.5/7.2 kVManufacturerCatalog NumberConditionsAluma-FormSingle PhaseF1CA-MV-x18*To obtain experience.For use only in scenic areas and locations where right-of-way is limited.Not to be used where conductor galloping may be expected.Not to be used in contaminated atmospheres.Hubbell (Chance)Two-phase pin bracket2SBM36VV4Same as above.Standoff insulator1SBM13H1Deadend armDEM36SPMacLean (Continental)Two-phase pin bracketG2MDA x 36DV2Same as above.Two-phase angle bracketG2MDA X 36AX1Standoff insulator G1MDA x 12AS1Standoff insulator G1MDA x 18AS1Deadend armGDAS-36ESuspension bracketG1MDA x 18AEMacLean (Joslyn)Standoff bracketG1MDA x 18ATSame as above.* x = “A” for angled, 15 degrees or “H” for horizontalConditional Listeq(2.1)April 13, 2022eq - Narrow Profile Brackets and Special Arm AssembliesFIBERGLASS REINFORCED PLASTICFor 12.5/7.2 kVManufacturerCatalog NumberConditionsM.D. Henry Company, Inc.TPIV-1.5-36To obtain experience.For use only in scenic areas and locations where right-of-way is limited.Not to be used where conductor galloping may be expected.Not to be used in contaminated atmospheres.TPIV-1.5-36-1.375SPSS-1.5-13SPSS-1.5-18Hughes BrothersTwo-phase angle bracket761-36-8Same as above.Two-phase pin bracket813-36Standoff insulator560-13Standoff insulator560-18Suspension bracket615-18Deadend arm540-36Standoff bracket892-18Fiberglass Line HardwareSingle-phase 0? Cutout & Arrestor BracketFLH0-1-15C1Same as above.Single-phase 15? String BracketFLHR-1-15VConditional Listeq(3)January 2012eq - Narrow Profile Brackets and Special Arm AssembliesFIBERGLASS REINFORCED PLASTICFor 24.9/14.4 kVManufacturerCatalog NumberConditionsAluma-FormSingle PhaseF1CA-MV-x18*To obtain experience.For use only in scenic areas and locations where right-of-way is limited.Not to be used where conductor galloping may be expected.Not to be used in contaminated atmospheres.Hubbell (Chance)Two-phase pin bracket2SBM44VV4Standoff insulator1SBM19V4Deadend armDEM48SPMacLean (Continental)Two-phase pin bracketG2MDA x 44DV3Same as above.Two-phase pin bracket G2HDA x 48DV3Standoff insulatorG1MDA x 18DV3Standoff insulatorG1MDA x 19DV3Standoff insulatorG1MDA x 20DV3Standoff bracketG1MDA x 18ATDeadend armGDAS-48EM.D. Henry Company, Inc.TPIV-1.5-44-1.375 Same as above.TPIV-1.5-48-1.375TPIV-2-48-1.375SPSV-1.5-18-1.375SPSV-1.5-19-1.375SPSV-1.5-20-1.375SPSV-2-20-1.375SP3CA-1.5-18* x = “A” for angled, 15 degrees or “H” for horizontalConditional Listeq(3.1)July 2009eq - Narrow Profile Brackets and Special Arm AssembliesFIBERGLASS REINFORCED PLASTICFor 24.9/14.4 kVManufacturerConditionsHughes BrothersDeadend arm, 540-48Standoff insulator, 880-20Two-phase pin bracket, 883-48Standoff insulator, 870-19Two-phase pin bracket, 862-44Standoff bracket, 892-181. To obtain experience.2. For use only in scenic areas and locations where right-of-way is limited.3. Not to be used where conductor galloping may be expected.4. Not to be used in contaminated atmospheres.Conditional Listeq(4)July 2009eq - Narrow Profile Brackets and Special Arm AssembliesWOOD ARM ASSEMBLIESManufacturerConditionsAluma-FormArm assembly, 12.5/7.2 kV XA-3812Arm assembly, 24.9/14.4 kV XA-42141. To obtain experience.2. For use only in scenic areas and locations where right-of-way is limited.3. Not to be used where conductor galloping may be expected.4. Not to be used as deadend structures.Hughes BrothersDeadend arm, 2890-J complete with braces and attaching hardware, fittings and bolts1. To obtain experience.2. For use only in scenic areas and locations right-of-way is limited.3. Not to be used where conductor galloping may be expected.Conditional Listeq(5)July 2009eq - Narrow Profile Brackets and Special Arm AssembliesCOMBINATION INSULATORS AND BRACKETSManufacturerConditionsSalisburyHorizontal Post12.5/7.2 kV, 956124.9/14.5 kV, 95621. To obtain experience.2. For use only in scenic areas and locations where right-of-way is limited.3. Not to be used where conductor galloping may be expected.4. Not to be used in contaminated atmospheres.er-1July 2009er - Wire Guard, PlasticSee Drawing K4.1GManufacturerType orCatalog NumberHubbell (Chance)PFGHubbell (Fargo)GM-936Preformed Line Products (Tree Guard)PTGes-1March 2013es - Splice Cover, Plastic(For use over compression type service connections in place of tape)ManufacturerTypeHubbell (Anderson)Type SECKearney/EatonType 601Plastic Engineering & Sales Co.Wire Splice Cover3MPST Series 8420Virginia PlasticsType VPSplice Cover and Moisture Seal for Secondary Cable Connections (See Drawings G312 and UM5)ManufacturerTypeTE Connectivity - EnergySealing & Dielectric CompoundPlymouth/Bishop10 Plyseal3MScotch Brand #2200Bolted Connector Cover(For use over bolted type service connections in place of tape)ManufacturerTypeHubbell (Anderson)PTCHubbell (Fargo)GA-9000 B Serieseu-1July 2009eu - Extension Link(Fiberglass)(Distribution)ManufacturerStrengthCatalog NumberDulmison 11,000 lbs.HSB-1-12*15,000 lbs.HSB-2X-12Joslyn (Flagg)11,000 lbs.150-12EE15,000 lbs.150-12EEHubbell (Anderson)10,000 lbs.GSB1-9*15,000 lbs.GSB2-1216,000 lbs.GS16012EEK-Line15,000 lbs.KL SeriesMacLean (Continental)11,000 lbs.GEE11-12*15,000 lbs.GEE15-12*For use with 6" suspension insulators.Conditional Listex(1)July 2009ex - Splice, formed typeManufacturerConditionsPreformed Line ProductsSplice for ACSRFTS full tension spliceSplice for AWACLS-0185 for 4-4/3LS-0188 for 2-4/3LS-0191 for 1/0-4/3To obtain experience.For repair only.To obtain experience.For repair only where alumoweld strands are not broken.fc-1July 2009fc - Capacitors, Shunt12470/7200 VoltsManufacturerSize1 Bushing2 Bushing3 BushingABB100 kvarA10009A10010150 kvarA15009A15010200 kvarA20009A20010300 kvarA30009A30010400 kvarA40009A40010Eaton50 kvarCEP120B6CEP120A6100 kvarCEP131B6CEP131A6150 kvarCEP132B6CEP132A6200 kvarCEP140B6CEP140A6300 kvarCEP160B6CEP160A6400 kvarCEP170B6CEP170A6500 kvarCEP180B6CEP180A6General Electric25 kvar52L226RC52L206RC Film/Foil Type50 kvar51L226RC51L206RC100 kvar54L226RC54L206RC150 kvar54L526RC54L506RC200 kvar58L126RC58L106RC300 kvar59L226RC59L206RC59L611RC24900/14400 VoltsManufacturerSize1 Bushing2 Bushing3 BushingABB100 kvarA10031A10032150 kvarA15031A15032200 kvarA20041A20042300 kvarA30031A30032400 kvarA40031A40032Eaton50 kvarCEP123B9100 kvarCEP130B9150 kvarCEP139B9200 kvarCEP143B9300 kvarCEP163B9400 kvarCEP173B9500 kvarCEP183B9General Electric50 kvar51L252RC Film/Foil Type100 kvar54L252RC150 kvar54L552RC200 kvar58L154RC300 kvar59L154RC400 kvar98L154RCfd-1October 2015fd – Hangers, CapacitorCrossarm Mounting1 unit2 units3 or 4 unitsABB85B397G01791C644G01791C644G02EatonCH1A1CH2A2CH4A1General Electric39F41G239F5339F80G1Pole MountingSingle PhaseThree PhaseIn LineClusterABBAL30R (3 units)(1 ? units)AL60R (6 units)AL30R (3 units)AL60R(6 units)AL90R(9 units)(3 ? units)AL13W(1 unit)AL23W(2 units)AL33W(3 units)AL43W(4 units)AL53W(5 units)Aluma-FormCR-3* thru CR-6*CR-3/4*3-CR-3/4*General Electric39F41G1 (1 unit)39F86G139F83G1 (3 units)Hubbell Power Systems R-1* Thru CCR-6*CCR-3/4*CCR-9/12*MacLean Power Systems-MCR-3MCR-3/4MCR-6* Available with oil switch mounting bracket.fg-1July 2009fg - Crossarm Saddle(3-3/4" x 4" with 1-1/4" x 1/4" flange)ManufacturerCatalog NumberLapp10369fi-1July 2009fi - Connectors, hot lineOver Armor RodsManufacturerCatalog Number or Series (Al to Al)Catalog Number or Series (Al to Cu)BlackburnPGH-Hubbell (Anderson)AC SeriesAC-GP-SeriesHubbell (Fargo)GA-100 SeriesGA-100C Seriesfj, fk, flOctober 2015fj – Bracket, extension(For use in mounting circuit reclosers or sectionalizers)See Drawing VM3-10AThrough Bolt TypeBand TypeAluma-FormTBRSM-1, TB2M1-9*RSM-1DixieD-2359-M-JoslynJ2357-MacLean Power SystemsMTB2M1-9-*For mounting double lug reclosers.fk – Bracket, circuit recloser or sectionalizer(For cluster mounting of three circuit reclosers on pole)Cluster MountRack MountAluma-FormRSM-3, 6M3-9*3SPR-66, 3SPR-84MacLean Power Systems-M3SPR-66Turner695-3-*Suitable for 14.4 and heavy duty 7.2 kV.fl – Rack, primary metering(For cluster mounting of primary metering equipment on pole)Aluma-FormPMM SeriesBarfield Manufacturing Co.BAPMM6Turner3CT-PTMacLean Power SystemsMPMM-6fm-1September 2013fm - Extension Bracket for Mounting Apparatus(Arrester, Cutouts and Potheads for Distribution Pole Mounting)ManufacturerApplicationVoltageSingle PhaseThree PhaseAluma-Form, Inc.12.5/7.2 kV1HCA-18 SeriesR3CA-481HCA-C-18F3CA-MV-H3012 seriesF3CA-MV-A3012 series24.9/14.4 kVWBMA-1R3CSA-48F3CA-MV-H4017 seriesF3CA-MV-A4017 seriesBarfield Mfg. Co.12.5/7.2 kVBAC 1256-24.9/14.4 kVBAC 1710-12.5/7.2 kVBACA 126(double mounting)-24.9/14.4 kVBACA 1710 (double mounting)-Dixie12.5/7.2 kVD-1580D27211-G24.9/14.4 kVD-1583-Hubbell (Anderson)12.5/7.2 kVCOB-E-120-TGL-24.9/14.4 kVACOB-E-180-COB-E-180-TGL-Hubbell (Chance)24.9/14.4 kVC653-1038C653-1056Hubbell Power Systems, Inc.1SBMxxTD Series-1SBMxxAM Series-1SBMxxC Series-1SBMxxAMT Series-1SBMxxCT Series-1SBMxxCL Series-1SBMxxSGL Series-12.5/7.2kVC1HCAC-12.5/7.2kVC1HCA-24.9/14.4kVC1HCAC18-24.9/14.4kVC1HCA18-Hughes Brothers12.5/7.2 kV892-18670-4024.9/14.4 kVLine Hardware12.5/7.2 kVCA-12-3GL-MacLean (Bethea)12.5/7.2 kVVIB3-18-R1-GC-C-VIB3-12F-GC-24.9/14.4 kVVIB3-18-GC-Note: Above brackets are not suitable for supporting or deadending distribution line conductors. (See items “eq” for narrow profile bracket and special arm assemblies)fm-1.1October 2015fm - Extension Bracket for Mounting Apparatus(Arrester, Cutouts and Potheads for Distribution Pole Mounting)ManufacturerApplicationVoltageSingle PhaseThree PhaseMacLean (Continental)12.5/7.2 kVIACB-12-5LGEG3MA013012DD24.9/14.4 kVIACB-18-5LGEG3MA014017DDMacLean Power Systems12.5/7.2 kVM1HCA-C-18MR3CA-48M.D. Henry Company, Inc.24.9/14.4 kVSAB-3-18-GC-Note: Above brackets are not suitable for supporting or deadending distribution line conductors. (See items “eq” for narrow profile bracket and special arm assemblies)fn-1October 2011fn - Extension Bracket for Mounting CutoutsRefer to item fmfo-1July 2009fo - Bracket, Transformer Secondary, InsulatedBracket WithBracket WithManufacturerBracket Without2-1/4" Diameter3-1/8" DiameterInsulatorInsulatorSpool InsulatorSpoolHubbell (Chance)-9113S9114SJoslyn-J6765-AJ6765MacLean (Continental)U865U865/208U865/205fp-1July 2009fp - Oval Eye Ball(30,000 lbs; to be used with 52-3 and 52-5 insulators)ManufacturerNo.(No accepted items at this time)Conditional Listfq(1)July 2009fq - Laminated Upswept ArmsApplicable Specification: RUS Specification DT-5BApplicable Drawing: RUS Drawing TUS-1ManufacturerConditionsHughes BrothersTypes:C-4080A (5-1/8" width)C-4080B (5-1/8" width)C-4113A (3-1/8" width)C-4113B (3-1/8" width)1. To obtain experience.2. For use only in scenic and urban areas where right- of-way is limited.fs-1February 2015fs - Pole Bearing PlateManufacturerCatalog NumberHubbell (Chance)C1100954Conditional Listfs(1)July 2009fs - Pole Bearing PlateManufacturerConditionsJoslyn (Flagg)P325B-122Same as above.MacLean (Continental)PB-80-7Same as above.ft-1October 2015ft - Y-Clevis BallManufacturerCatalog NumberJoslynBT 3030Preformed Line ProductsBYC-30fu-1July 2009fu - Swinging angle bracket(TRANSMISSION)Applicable Specification: T-8Swinging angle bracket with hardware and fittingsManufacturer2' - 0"3' - 6"Type #1Type #2Brooks64233A64233BXHughes Brothers28482848XXfv-1July 2009fv - Guying AttachmentsTransmissionPole Eye Plates*25,000 lbs. @ 90o/36,000 lbs. @ 45oManufacturerSingle EyeDouble Eye - 7/8" Bolts3/4" Bolts7/8" BoltsJoslyn (Flagg)PX37D-PX42MacLean (Continental)EPR-66S-12--*Capacity of pole eye plateConditional Listfv(1)July 2009fv - Guy Attachments, Pole Bands Attachments, Pole BandsWith Through Bolts for Transmission LinesMedium Duty Pole Bands25,000 lbs @ 90o/36,000 lbs @ 45o*ManufacturerPole Band andAssociated Hardware**ConditionsHughes Bros.3108.x-2718.55To obtain experience.JoslynJ25968. x GLTo obtain experience.Heavy Duty Pole Bands36,000 lbs. @90o /51,000 lbs. @ 45o*ManufacturerPole Band andAssociated Hardware**ConditionsHughes Bros.3107.x-2718.55To obtain experience.* For a guy lead greater than 1/1, capacity of pole band should be derated.** Associated hardware includes through bolt, band connecting bolts, nuts, grounding clip and lag screws (if any). Connecting links (Item du (1)) of the required strength should be ordered separately from the same manufacturer.ga-1July 2009ga - Watthour and Watthour-Demand Meters1?, 2 and 3 wire or 2/3 wire 120/240 volts(Classes 100, 200, 10, and 20)Self-Contained TypesManufacturerType of BaseWatthour Meter TypeMechanical DemandWatthour TypeThermal DemandWatthour TypeNumber ofTerminals123456ElsterBottom Con.--- -SocketAB1--4General ElectricBottom Con.I50AIM50A-4SocketI70SIM70S-4Landis & GyrBottom Con.----SocketMSBMS-2STMS4SchlumbergerBottom Con.J5SAJ5DSA--SocketJ5S*J5DS-4Transformer Rated TypesElsterBottom Con.----SocketAB1--5 or 6General ElectricBottom Con.I50AIM50A-5 or 6SocketI70SIM70S-5 or 6Landis & GyrBottom Con.----SocketMSBMSTMS5 or 6SchlumbergerBottom Con.J5SAJ5DSA--SocketJ5SJ5DS-5 or 6* Type J4ES for Class 320ga-2July 2009ga - Watthour and Watthour-Demand MetersPolyphase 2 element - 3 wire, 240 volts - Delta and 120/208 Volts Network(Classes 100, 200, 10, and 20)Self-Contained TypesManufacturerType of BaseWatthour Meter TypeMechanical DemandWatthour TypeThermal DemandWatthour TypeNumber ofTerminals123456ElsterBottom Con.----SocketABS-5---General ElectricBottom Con.V62AVM62A-5SocketV62SVM62S--Landis & GyrBottom Con.----SocketMT012S or 13SBMT-12S or 13STMT-12S5 or 8SchlumbergerBottom Con.SL2ASL2DA-5 or 8SocketSL2SSL2DS- -SL12SSL12DSTransformer Rated TypesElsterBottom Con.ABA-2---SocketABS-2--8General ElectricBottom Con.V63AVM63A-8SocketV63SVM63S--Landis & GyrBottom Con.MT-5ABMT-5ATMT-5A8SocketMT-5SBMT-5STMT-5S8SchlumbergerBottom Con.SL3ASL3DA--SocketSL3SSL4DS-8ga-3July 2009ga - Watthour and Watthour-Demand MetersPolyphase 2 element - 4 wire Delta - 120/240 volts(Classes 100 or 200)Self-Contained TypesManufacturerType of BaseWatthour Meter TypeMechanical DemandWatthour TypeThermal DemandWatthour TypeNumber ofTerminals123456ElsterBottom Con.ABA-7--7 or 8SocketABS-7---General ElectricBottom Con.V66AVM66A-7SocketV66SVM66S--Landis & GyrBottom Con.----SocketMT-15SBMT-15STMT-15S7SchlumbergerBottom Con.SL6ASL6DA--SocketSL6SSL6DS-7 or 8ga-4July 2009ga - Watthour and Watthour-Demand MetersPolyphase - 2-1/2 element - 4 wire wye - (120/208) (277/480) volt(Classes 100, 200, 10, and 20)Self-Contained TypesManufacturerType of BaseWatthour Meter TypeMechanical DemandWatthour TypeThermal DemandWatthour TypeNumber ofTerminals123456ElsterBottom Con.ABA-8---SocketABS-8---General ElectricBottom Con.V65AVM65A-7SocketV65SVM65S--Landis & GyrBottom Con.----SocketMT-14SBMT-14STMT-14S7SchlumbergerBottom Con.SL5ASL5DA--SocketSL5SSL5DS-7 or 8Transformer Rated TypesElsterBottom Con.ABA-8---SocketABS-8--13General ElectricBottom Con.V65AVM65A-7 or 13SocketV65SVM65S--Landis & GyrBottom Con.MT-6ABMT-6ATMT-6A10SocketMT-7S or 6SBMT-7S or 6STMT-7S or 6S7 or 13SchlumbergerBottom Con.SL5ASL5DA--SocketSL5SSL5DS-13ga-5July 2009ga - Watthour and watthour-Demand MetersPolyphase - 3 element - 4 wire wye - (120/208) (277/480) volt(Classes 100, 200, 10, and 20)Self-Contained TypesManufacturerType of BaseWatthour Meter TypeMechanical DemandWatthour TypeThermal DemandWatthour TypeNumber ofTerminals123456ElsterBottom Con.ABA-3---SocketABS-3--7 or 8General ElectricBottom Con.V64AVM64A--SocketV64SVM64S-7 or 8Landis & GyrBottom Con.----SocketMT-16SBMT-16S-7SangamoBottom Con.S4AS4DA--SocketS4SS4DS-7 or 8Transformer Rated TypesElsterBottom Con.ABA-3---SocketABS-3---General ElectricBottom Con.V64AVM64A--SocketV64SVM64S-13Landis & GyrBottom Con.MT-9ABMT-9A-12SocketMT-9S or 10SBMT-9S or 10S-13SangamoBottom Con.SL4ASL4DA--SocketSL4SSL4DS-13ga-6July 2009ga - Meters, Min/Max IndicatingAmmeters IndicatingManufacturerTypeDescriptionBiddle50,000 SeriesThermal, Max PointerDemicoAD121RDigital min/max ampere demand meterED ElectricMax-I-Meter(all models)Thermal AmmeterSchlumbergerADSThermal AmmeterVoltmeter, Min/MaxManufacturerTypeDescriptionBitronicsVMAMC1Digital Demandmin/max voltmeterDemicoAV121RDigital min/maxvoltmeterReid and Rochon AssociatesLVM-100Digital Demandmin/max voltmeterConditional Listga(1)July 2009ga - Watthour and Watthour-Demand MetersManufacturerConditionsLandis & GyrSpecial base, 3 wire, 1 ? watthour meter, Type MSK, Class 400 watthour and mechanical demand Type BMS-K watthour and thermal demand Type TMS-2KSocket base, 3 wire, 1 ? watthour meter, Type MSE, Class 3001. To obtain experience.2. To be used only where Class 400 meters are permitted by local regulatory bodies.1. To obtain experience.2. To be used only where Class 300 meters are permitted by local regulatory bodies.Conditional Listga(2)February 2010ga - Watthour and Watthour-Demand MetersSolid State RegistersManufacturerConditionsElectro Industries/GaugeTechTo obtain experience.NEXUS 1262Form 9S, Class 20NEXUS 1272Form 9S, Class 20ElsterTo obtain experience.Solid State Polyphase Watthour meter, Alpha line, A1, A and S type bases (all forms) Class 20 and 200, 120, 240, 277, and 480 VGETo obtain experience.kV Vector MeterForm 10A, 36A, 45A, 48A, 3S, 9S, 36S, 45S, 56S; Class 20; 120 V to 480V or 57V to 120VForm 13A, 16A; Class 150; 120V to 480 VForm 2S, 12S, 16S; Class 200 or 320; 120V to 480VSensusSocket base, single-phase watthour metersTo obtain experience.Form 1s, 12s, 2s, Class 200 @ 120, and 240 VoltsForm 2s Class 320 @ 240 VoltsForm 3s & 4s Class 20 @ 120, and 240 VoltsSocket base, poly-phase watthour metersTo obtain experience.Form 9s Class 20 @ 120-480 VoltsForm 16s Class 200 @ 120-480 VoltsItron Inc.To obtain experience.SENTINELForms 9S, 10A, 45A, 45S, 46A, 46S, 48A, 66S Class 20Form 16A Class 150Forms 2S, 12S, 16S Classes 200 and 320Conditional Listga(2.1)July 2009ga - Watthour and Watthour-Demand MetersSolid State RegistersManufacturerConditionsLandis+GyrSolid State Watthour Meter Type DDS2, Form 5S, 6S, 8S, 9S, 10S, Class 20.FOCUSForm 1S, Class 100Form 25S, Class 200Form 2S, Class 200TA30 and 200TA50Form 2SE, Class 320TA30 and 320TA50Form 2K, Class 4800/600Form 3S, 4S, Class 10 and 20Altimus Solid State MeterForm 1S, Class 100Form 25S, Class 200Form 2S, Class 200TA30 and 200TA50Form 2SE, Class 320TA30 and 320TA50Form 2K, Class 480/600Form 3S, 4S, Class 10 and 20S4 Polyphase Solid State MeterForm 5S/45S, 6S/36S, 9S/8S, Class 20Form 12S, 16S, Class 200To obtain experience.Power MeasurementION 8300Form 9S, 35S, 36S Class 20ION 8400Form 9S, 35S, 36S, 39S, 76S Class 20ION 8500Form 9S, 35S, 36S, 39S, 76S Class 20To obtain experience.To obtain experience.To obtain experience.SchlumbergerCENTRONForm 2S, Class 200.Solid State or Mechanical Register.FULCRUM SQ400Form 5A, 6A, 9A, 5S, 6S, 9S, 10S, Class 20FULCRUM SL300 SeriesForm 5A, 6A, 8A, 9A, 5S, 6S, 8S, 9S, 10S, 12S, 14S, 15S, 16S, Class 20 and 200.QUANTUM Q200 SeriesForm 5A, 6A, 8A, 9A, 5S, 6S, 8S, 9S, 10S, 26S, Class 20 and 200.QUANTUM Q300 SeriesForm 6A, 9A, 6S, 9S, 10S, Class 10 and 20.VECTRON SVXForm 5A, 6A, 8A, 10A(9A), 5S, 6S, 9S(8S), 12S, 16S(14S, 15S), 26S, Class 20 and 200.To obtain experience.To obtain experience.To obtain experience.To obtain experience.To obtain experience.To obtain experience.Conditional Listga(2.2)July 2009ga - Watthour and Watthour-Demand MetersSolid State RegistersManufacturerConditionsTransdata, Inc.MARK-V EMSForm 5S, 5A, 6S, 6A, 8S, 8A, 9S, 9AClass20To obtain experience.gb-1July 2009gb - Meter SocketsType or Catalog NumberManufacturerRingRinglessNo. JawsRating Amps.ABB#S4, 5, 6100STS5, 6200/400** 1? 3wSTS-28200/400** 3? 3wSTS-313200/400** 3? 4w Y or DeltaSTS-78200/400** 3? 4w DeltaSTS-88 or 13200/400** 3? 4w YSTA-2200/400 3? 3wSTA-3200/400 3? 4W Y or DeltaSTA-7200/400 3? 4w DeltaSTA200/400 1? 3w# Anchor1000 Series (1003-1006)1000 Series (1003-1006)4, 51001100 Series (1100-1109)1100 Series (1100-1109)4, 5, 71501200 Series (1201-1209)1200 Series (1201-1209)4, 52001200/1300 Series (1275-1300)4, 5, 72001600 Series (1600-1661)1600 Series (1600-1661)4, 53201500 Series (1500-1526)1500 Series (1500-1526)4, 5100/125 per sta.1500 Series (1530-1536)1500 Series (1530-1536)4, 5150 per sta.1500 Series (1540-1546)1500 Series (1540-1546)4, 5200 per sta.1400 Series (1405-1473)1400 Series (1405-1473)4, 5, 6, 7, 8, 1320/100MurraySJ Series* (Single)RJ Series* (Single)4, 5, 6100SN Series* (Single)RN Series* (Single)4, 5, 6100SS Series* (Single)RS Series* (Single)4, 5, 6200RH Series* (Single)5, 7200 HD#Available with UL label*UL labelgb-1.1July 2009gb - Meter SocketsType or Catalog NumberManufacturerRingRinglessNo. JawsRating Amps.DurhamR-RS512RS502#4 or 5150R-RS502RS512#H-4300 Series#4, 5, 7320H-5300 Series#H-7300 Series#RS101-RS111#RS101-RS111#4 or 51002R1121-6R1131#2R1121-6R1131#2R1421-6R1431#2R1421-6R1431#RS202#RS202#4 or 5200RS212, RS213#RS212, RS213#4 or 5200RS220-RS233#RS220-RS233#2R2332-6R2392#2R2332-6R2392#Eaton ElectricalR-RS512-CHRS502-CH #4 or 5150R-RS502-CHRS512-CH#H-4300-CH Series#4, 5, 7320H-5300-CH Series#H-7300-CH Series#RS101-RS111-CH #RS101-RS111-CH #4 or 51002R1121-6R1131-CH#2R1121-6R1131-CH #2R1421-6R1431-CH #2R1421-6R1431-CH #RS202-CH #RS202-CH #4 or 5200RS212-CH, RS213-CH #RS212-CH, RS213-CH #4 or 5200RS220-RS233-CH #RS220-RS233-CH #2R2332-6R2392-CH #2R2332- 6R2392-CH #Dyna-TechOverhead1100-C - 1107-C1000-C - 1007-C4 & 51001300-C - 1307-C1200-C - 1207-C4 & 51002100-CH-2107-CH2000-CH-2007-CH4 & 52002300-CH-2307-CH2200-CH-2207-CH4 & 5200Underground2590-CHU-2597-CHU4 & 52002790-CHU-2797-CHU4 & 52002090-CHU-2097-CHU4 & 52002290-CHU-2297-CHU4 & 5200General Switch42100 Series*4, 5, 6100*UL Label#Available with UL labelgb-1.2September 2014gb - Meter SocketsType or Catalog NumberManufacturerRingRinglessNo. JawsBypassRating Amps.Main BreakerLandis & GyrOverheadAS SeriesAS Series4, 5, 6100-200A2 thru A64, 5100-200Series (Multiple Mounting)CQ#4, 5, 7200HQ#4, 5, 7200 HDHQ-T6, 7, 8, 1320UndergroundRSU#4, 5, 6200CQ-U#4, 5, 7200HQ-U#4, 5, 7200MilbankOverheadS7462, 3,4,5,6S4950-RL-2004200200S3950-RL-1004100100U4216-RXL4Bypass200U5786-X-K3-K2-BL4 or 5HD LVR320 (400 max) (HD)U7362*, 3,4,5,64 or 5100U7487-XL-TG-KK4 or 5Horn125S7486 SeriesR7486 Series*4 or 5100S7262 SeriesU7262 Series*4 or 5150S7021 SeriesU7021 Series*4 or 5200S9550 SeriesU9550 Series*4 or 5200 (HD)S9700 SeriesU9700 Series*7200 (HD)U9801-RRL4 or 5HD LVR200UndergroundU4216-RXL4Bypass200U7487-XL-TG-KK4 or 5Horn125U5786-X-K3-K2-BL4 or 5HD LVR320 (400 max) (HD)S8086-XLU8086-XL*4 or 5100S8084-XLU8084-XL*4 or 5150S7040-XLU7040-XL*4 or 5200S9551-XLU9551-XL*4 or 5200 (HD)S9701-XLU9701-XL*7200 (HD)U9801-RRL4 or 5HD LVR200# Available with UL label*UL labelgb-1.3September 2014gb - Meter SocketsType or Catalog NumberManufacturerRingRinglessNo. JawsBypassRating Amps.Main BreakerMilbankUnderground PedestalMPAP-200-MB-784200200MPAPD-200-MB-78 (double sided)4200200SuperiorOverhead5014, 5100314*414*4, 5150314*414*4, 5200452 Series4, 5150 per sta.382 Series482 Series*4, 5200 per sta.492 Series7200 3? 4w Y or Deltaper sta.RLK Series*5, 7200 3? 4W Y or Delta600 VUndergroundSuperior314*414*4, 5100414*4, 51504147200 3? 4w Y or Delta"RLPK" Series5, 7200 3? 4w Y or Delta600 VBRL 19154, 5150 per sta.#Available with UL label* UL label** Transformer rating in first figure; maximum loading shown by second figureConditional Listgb(1)July 2009gb - Meter socketsManufacturerConditionsDurhamM-400 ampere 4 or 5 jaws for use with Class 10 metersTo obtain experience.Landis & GyrMeter mounting device 400 ampere, Type K-4# for use with Type MS-K, 1 ? Duncan metersSocket type HQ-4S 4 jaws rated for Class 300 service1. To obtain experience.2. To be used only where Class 400 meters are permitted by local regulatory bodies.1. To obtain experience.2. To be used only where Class 300 meters are permitted by regulatory bodies.MilbankType S1079-F, 4 jaws rated for Class 320 serviceTo obtain experience.#Available with UL label.gj-1July 2009gj - Crossarm Assemblies and Arm SpacersDistributionWood crossarm assembly complete with braces and attaching hardware, fittings and boltsCrossarm AssemblyManufacturerCrossarm SizeCatalog No.Brooks3-1/2” x 4-1/2” x 8'-0"3-3/4” x 5-3/4” x 8'-0"3-3/4” x 7-3/4” x 8'-0"3-3/4” x 7-3/4” x 10'-0"3103-A83103-C83203-A83203-A10Hughes Brothers3-1/2” x 4-1/2” x 8'-0"3-3/4” x 5-3/4” x 8'-0"3-3/4” x 7-3/4” x 8'-0"3-3/4” x 7-3/4” x 10'-0"2890A2890B2892-A2892-BPennington3-1/2” x 4-1/2” x 8'-0"3-3/4” x 5-3/4” x 8'-0"3-3/4” x 7-3/4” x 8'-0"C500BC500FC500MTwin Arm Spacer*To be used with standard hardware, 3-5/8" x 4-5/8" x 8’-0” crossarm, and 28" wood bracesLine HardwareCAS-455*Restricted to applications where the conductor's maximum design tension is less than 1250 lbs. and to conductor sizes 1/0 ACSR and below.Conditional Listgj(1)June 2011gj - Crossarm AssembliesBraceless, woodManufacturerDimensionsConditionsAluma-FormHD-DEA-86-EB-REA HD-2-DEA-86-EB-REAHD-DEA-108-EB-REAHD-2-DEA-108-EB-REA4-1/4” x 5-1/2” x 8’-0”5-3/8” x 5-1/2” x 8’-0”4-1/4” x 5-1/2” x 10’-0”5-3/8” x 5-1/2” x 10’-0”To obtain experience.Hughes Brothers3377-A7.53377-A8.53377-A9.53-1/2” x 7-1/2” x 8’-0”3-1/2” x 8-1/2” x 8’-0”3-1/2” x 9-1/2” x 8’-0”To obtain experience.Conditional Listgj(2)January 2017gj - Crossarm AssembliesBraceless, fiberglassAluma-FormFDA20-96 3-5/8” x 4 5/8” x 8’To obtain experience.FDA20-1203-5/8” x 4 5/8” x 10’FDA25-963-5/8” x 4 5/8” x 8’FDA25-1203-5/8” x 4 5/8” x 10’FDA30-963-5/8” x 4 5/8” x 8’FDA30-9120 3-5/8” x 4 5/8” x 10’Geotek (PUPI)DA2000096DA2000120DA2500096DA2500120DA3000096DA3000120DA4000096DA4000120DA4400096DA44001203-5/8” x 4-5/8” x 8’-0”3-5/8” x 4-5/8” x 10’-0”3-5/8” x 4-5/8” x 8’-0”3-5/8” x 4-5/8” x 10’-0”3-5/8” x 4-5/8” x 8’-0”3-5/8” x 4-5/8” x 10’-04” x 6” x 8’-0”4” x 6” x 10’-0”4” x 6” x 8’-0”4” X 6” X 10’-0”To obtain experience.MacLean Power SystemsPZ08LDPZ10LDPY08SDPY10SDPW08LDPW10LD4” x 6” x 8’ – 0”4” x 6” x 10’ – 0”4” x 6” x 8’ – 0” 4” x 6” x 10’ – 0” 3-5/8” x 4-5/8” x 8’ – 0” 3-5/8” x 4-5/8” x 10’ – 0”To obtain experience.PowertrusionPSD082A1FRUSPSD102A1FRUSPHD082A1FRUSPHD102A1FRUS4” x 6” x 8’-0”4” x 6” x 10’-0”4” x 6” x 8’-0”4” x 6” x 10’-0”To obtain experience.ShakespeareIDB096XDB096HDB096IDB120XDB1204" x 6" x 8'-0"4" x 7-1/2" x 8'-0"3-1/2" x 4-1/2" x 8'-0"4" x 6" x 10'-0"4" x 7-1/2" x 10'-0"To obtain experience.TDB0963-1/2” x 4-1/2” x 8’-0”HDB1203-1/2” x 4-1/2” x 10’-0”TDB1203-1/2” x 4-1/2” x 10’-0”Conditional Listgj(2.1)April 2016gj - Crossarm AssembliesBraceless, fiberglassManufacturerDescriptionConditionsDIS-TRAN Wood Products, LLCCDL Series, CDM Series, CDH Series8-foot and 10-footTo Obtain experience.Creative Pultrusions, Inc.To obtain experienceSD409600K4"x6"x 8'SD401200K 4"x6"x 10'SD609600K 3-5/8"x4-5/8"x 8'SD601200K 3-5/8"x4-5/8"x 10'SD800960K 3-5/8"x4-5/8"x 8'SD801200K 3-5/8"x4-5/8"x 10'Conditional Listgj(3)May 21, 2020gj - Crossarm AssembliesCompositeManufacturerDescriptionConditionsHubbell Power SystemsCDA25G060D2000CDA25G096D2000CDA25G096D4000CDA25G120D2000CDA25G120D4000CDA25G144D2000CDA25G144D40004-5/8" X 3-5/8" X 5'-0"4-5/8" X 3-5/8" X 8'-0"4-5/8" X 3-5/8" X 8'-0"4-5/8" X 3-5/8" X 10'-0"4-5/8" X 3-5/8" X 10'-0"4-5/8" X 3-5/8" X 12'-0"4-5/8" X 3-5/8" X 12'-0"To obtain experienceTo obtain experienceTo obtain experienceTo obtain experienceTo obtain experienceTo obtain experienceTo obtain experiencego-1August 2019go – Fault Indicator, overheadManufacturerTypeSmart Grid SolutionsFI-5Agw-1March 2012gw - Crossarm Assembly for H-Frame ConstructionApplicable Specification:RUS Specification T-7, Revision dated November 1962Applicable Drawing:TH-11B Series (161 kV maximum)No braces (TH-11B)Two vee braces on outside (TH-11BVO)Two vee braces on inside (TH-11BVI)Four vee braces (TH-11BV4)3-5/8" x 9-3/8" x 33' wood crossarm assembly complete with attaching hardware, fittings, bolts and 33/8"?x?5-3/8" braces.Catalog Nos. or Drawing Nos.TH-11BTH-11BVOTH-11BVITH-11BV4ItemsItemsItemsItems(Assemblies)gwgw and vogw and vigw and vvBrooks (1, 2)64116411-16411-26411-3DIS-TRAN Wood Products, LLC (2,3)D3011D3011VOD3011VID3011V4Hughes Brothers (1, 2)C3316-BC3316-BC3316-BC3316-BPennington (1, 2)CCC11B72CCC11B72-VOCCC11B72-VICCC11B72-V41 - Fixed spacer fitting sizes as required2 - Adjustable spacers are availablegw-2March 2012gw - Crossarm Assembly for H-Frame construction(Double Arm) 230 kV (Small Angle)Applicable Specification: RUS Specification T-8, Drawing: TH-231BAssembly complete with attaching hardware, fittings, bolts and braces.Crossarm 3-5/8" x 9-3/8"ManufacturerCatalog NumberBrooks (1, 2)64231DIS-TRAN Wood Products, LLC (2,3)D3231Hughes Brothers (1, 2)C-3338-BPennington (1, 2)CCC231B82Crossarm 5-1/8" x 7-1/2"Brooks (1, 2)64231LHughes Brothers (1, 2)C-3338-BLPennington (1, 2)CCC231BT1 - Fixed spacer fitting sizes as required.2 - Adjustable spacers are available.gy-1March 2012gy - Crossarm Assembly for H-Frame Construction(Double Arm)Applicable Specification: RUS Specification T-7, Revision dated November 29, 1962Applicable Drawing: TH-10 SeriesNo braces (TH-10)Two vee braces on outside (TH-10VO)Two vee braces on inside (TH-10VI)Four vee braces (TH-10V4)3-5/8" x 9-3/8" x 32' wood crossarm assembly complete with attaching hardware, fittings, bolts and 3-3/8" x 5-3/8" braces.Catalog Nos. or Drawing Nos.TH-10TH-10VOTH-10VITH-10V4ItemsItemsItemsItems(Assemblies)gygy and vogy and vigy and vvBrooks (1, 2)64106410-16410-26410-3DIS-TRAN Wood Products, LLC (2,3)D3010D3010VOD3010VID3010V4Hughes Brothers (1, 2)C-3316-AC3316-AC-3316-AC-3316-APennington (1, 2)CCC1071CCC1071-VOCCC1071-VICCC1071-V4Niedermeyer-Martin (1)N-6710N-6711N-6712N-67131 - Fixed spacer fitting sizes as required2 - Adjustable spacers are availableConditionalgy(1)August 2014gy - Crossarm Assembly for H-Frame Construction(Double Arm)Applicable Specification: RUS Specification T-7, Revision dated November 29, 1962Applicable Drawing: TH-10 SeriesNo braces (TH-10)Two vee braces on outside (TH-10VO)Two vee braces on inside (TH-10VI)Four vee braces (TH-10V4)3-5/8" x 9-3/8" x 32' wood crossarm assembly complete with attaching hardware, fittings, bolts and 3-3/8" x 5-3/8" braces.Catalog Nos. or Drawing Nos.TH-10TH-10VOTH-10VITH-10V4ItemsItemsItemsItems(Assemblies):gygy and vogy and vigy and vvPUPI (1,2)-TX3020VO-TX3020V4(conditions):(To obtain experience)(To obtain experience)1 - Fixed spacer fitting sizes as required2 - Adjustable spacers are available4” x 6” x 32’ fiberglass crossarm assembly complete with attaching hardware, fittings, bolts and 3-5/8” x 4-5/8” fiberglass braces.Catalog Nos. or Drawing Nos.TH-10TH-10VOTH-10VITH-10V4ItemsItemsItemsItems(Assemblies):gygy and vogy and vigy and vvPUPI (1,2)TX4020TX4020VOTX4020VITX4020V4(conditions):(To obtain experience)(To obtain experience)1 - Fixed spacer fitting sizes as required2 - Adjustable spacers are availablegy-2March 2012gy - Crossarm Assembly for H-Frame Construction(Double Arm) 230 kV (Tangent)Applicable Specification: RUS Specification T-8Applicable Drawing: TH-230Assembly complete with attaching hardware, fittings, bolts and braces.Crossarm 3-5/8" x 9-3/8"ManufacturerCatalog No.Brooks (1, 2)64230DIS-TRAN Wood Products, LLC (2,3)D3230Hughes Brothers (1, 2)C-3338-APennington (1, 2)CCC23081Niedermeyer-Martin (1)N-6720Crossarm 5-1/8" x 7-1/2"Brooks (1, 2)64230LHughes Brothers (1, 2)C-3338-ALPennington (1, 2)CCC230T1 - Fixed spacer fitting sizes as required.2 - Adjustable spacers are available.gz-1July 2009gz - Crossarm Assembly for Wishbone Construction "Z" Type(Single Arm)Applicable Specification: RUS Specification T-5Applicable Drawings: RUS Drawing TSZ-1 3-5/8' x 5-5/8" wood crossarm assembly complete with brace and attaching hardware, fittings, and boltsThe following manufacturers have shown compliance with the applicable specifications for this assembly:ManufacturerCatalog Nos. or Drawing Nos.Brooks 64Z1Hughes BrothersC-3162-A and C-3162.10gz-2July 2009gz - Crossarm Assembly for Wishbone Construction, "Z" Type(Double Arm)Applicable Specification: RUS Specification T-5Applicable Drawings: RUS Drawings TSZ-23-5/8" x 5-5/8" wood crossarm assembly complete with brace and attaching hardware, fittings and boltsThe following manufacturers have shown compliance with the applicable specifications for this assembly:ManufacturerCatalog Nos. or Drawing Nos.Brooks (2)64Z2Hughes BrothersC-3162-B and C-3162.10(2) Adjustable spacers are available.Conditional Listrp(1)March 24, 2022rp - Wildlife GuardsBushings and Live Parts CoversManufacturerConditionsHubbell Power Systems“Greenjacket?” seriesTo obtain experience.Chris Kaye (Critter Guard)201 - "L" Bracket202 – Roller203 - WheelTo obtain experience.Hendrix Wire & CableBG-9 Bushing CoverTo obtain experience.Hendrix (Eco Electrical Systems, Inc.)EICG-1 Insulator/Conductor CoverEICG-1-WLPT Insulator/Conductor CoverEICG-1-20 Insulator/Conductor CoverEICG-1-32 Insulator/Conductor CoverTo obtain experience.*Kaddas Enterprises Inc.KE1039 Short Line Insulator ProtectorKE1045A BirdguardKE1049 BirdguardKE1053 Arrester capKE1064 Bushing coverKE1066 Arrester capKE1068 Cutout Switch CoverKE1077 Bushing coverKE1077 Rev A Transformer Bushing CoverKE1079 Rev B Load Break Cutout CoverKE1113 Dead-End Shoe CoverKE1165 Low Profile BirdguardKE1166-01 Line Protector Horizontal KE1182-03 Rev B Dead End CoverKE1198 Low Profile Line Protector, Clamp/Vise TopKE1203 Cutout CoverKE1501 Bushing Terminal CoverTo obtain experience.Power Line Sentry, LLCLine Covers (for C or J-neck insulators)To obtain STT, single top tie conductor coverCCDTT, double top tie conductor coverCCDST, double side tie conductor coverPreformed Line ProductsRPC-0800 RAPTOR PROTECTOR? (black)To obtain experience.RPC-0801 RAPTOR PROTECTOR? (grey)NOTES: The material composition of these items does not contain a flame-retardant unless specified by the manufacturer.*Specified by manufacturer as being flame-retardantConditional Listrp(1.1)May 2018rp - Wildlife GuardsBushings and Live Parts CoversManufacturerConditionsTripp (Eco Electrical Systems, Inc.)ECC-1 Cutout CoverECC-2-27-150BIL-S&C-Version 10 Cutout CoverECC-3-27-150BIL-S&C-Version 9 Cutout CoverECC-4-27-125BIL-S&C-Kearney HX Cutout CoverECC-5-ABB-LBU Cutout CoverTo obtain experience.TE Connectivity - EnergyBCAC Bushing Connection Animal CoversBCIC Bus Connection Insulating CoversBISG Bus Insulator Squirrel GuardMVLC Medium Voltage Line Cover (5-25kV)To obtain experience.Universal Thermography, Inc.TGB-50007 Bushing CoverTGB-65010 Bushing CoverTGB-82512 Bushing CoverTo obtain experience.W. H. Salisbury & Co.21116 Bushing Cover21317 Tri-Port Bushing CoverBC512 Cone Bushing Cover38-2SC Stinger Cover 3/8” IDx2’38-12SC Stinger Cover 3/8” IDx12’38-18SC Stinger Cover 3/8” IDx18’38-50SC Stinger Cover 3/8” IDx50’38-100SC Stinger Cover 3/8” IDx100’58-12SC Stinger Cover 5/8” IDx12’58-50SC Stinger Cover 5/8” IDx50’58-100SC Stinger Cover 5/8” IDx100’34-12SC Stinger Cover 3/4” IDx12’34-25SC Stinger Cover 3/4” IDx25’To obtain experience.Utility Solutions, Inc.USVS Series*To obtain experience.NOTES: The material composition of these items does not contain a flame-retardant unless specified by the manufacturer.*Denotes flame-retardant material.Conditional Listrp(1.2)February 4, 2021rp - Wildlife GuardsBushings and Live Parts CoversManufacturerConditionsReliaguard?*C0-10005LA-13002TC-14001Pl-12002RCK-12001KRK-11001KRK-11002KRK-11021 KDE-16001Pl-12001PD- 04015FPD-0522FBC-15001BC-15002BB-20045-RBB-25045-RBB-40045-RBB-45045-RRW-30100RW-36036RW-36048EEL-02503750-50-YEEL-03750500-50-YEEL-05000750-50-YEEL-07501000-50-YEEL-10001250-50-YEEL-12501500-50-YEEL-15001750-25-YEEL-17502000-25-YTo obtain experience.NOTES: The material composition of these items does not contain a flame-retardant unless specified by the manufacturer.*Denotes flame-retardant material.Conditional Listrp(1.3)July 5, 2023rp - Wildlife GuardsBushings and Live Parts CoversManufacturerConditionsMidsun Group, Inc.E/Flex Barrier*E/Anti-Nesting Barrier*E/Silicone Wildlife Covers**To obtain experience.NOTES: The material composition of these items does not contain a flame-retardant unless specified by the manufacturer.*Denotes flame-retardant material.**Denotes flame-resistant material.Conditional Listrp(1.4)November 1, 2023rp - Wildlife GuardsBushings and Live Parts CoversManufacturerConditionsCeleco?Wildlife Guards for Bushings and polymer Arresters (WLP) (up to 25kV)To obtain experience.NOTES: Self-extinguishing materials.Conditional Listrp(2)July 2009Anti-Perch DevicesManufacturerConditionsHendrix Wire & CableCatalog No. HPP-24To obtain experienceNOTE: The material composition of these items does not contain a flame-retardant unless specified by the manufacturer.sb-1March 2015sb - Switch, disconnect (single-pole, hook operated station class)NEMA standard switches for station or line structure use where single-pole switching is permissibleManufacturerTypeVoltage RatingsSystem VoltagesLine to LineABBHPL15 thru 69 kV12.5 thru 69 kVBridgesEH15 thru 69 kV12.5 thru 69 kVEHL(L)15 thru 34.5 kV12.5 thru 34.5 kVCleaveland/PriceLCO-C15 thru 69 kV12.5 thru 69 kVEatonD73P**(PL)15.5, 25.8, 38kV12.5 thru 35.5kVG & W ElectricB-2M15 thru 69 kV12.5 thru 69 kVEV(PL)15 thru 34.5 kV12.5 thru 34.5 kVHubbell (Chance)M3(PL)15 thru 27 kV12.5 thru 24.9 kVJohnsonHPT15 thru 69 kV12.5 thru 69 kVJoslyn (Hi-Voltage)HU15 thru 34.5 kV12.5 thru 34.5 kVHI15 thru 34.5 kV12.5 thru 34.5 kVKearney/EatonM-72(PL)15 thru 69 kV12.5 thru 69 kVH-7215 thru 34.5 kV12.5 thru 34.5 kVMEMCOSTV15 thru 69 kV12.5 thru 69 kVSTU15 thru 69 kV12.5 thru 69 kVMorganDHS(PL)15 thru 69 kV12.5 thru 69 kVRoyalBT15 thru 69 kV12.5 thru 69 kVSwitchgearBLT(PL)15 and 23 kV12.5 thru 24.9 kVS & C*LBD(PL)15 thru 34.5 kV12.5 thru 34.5 kVAlduti (L)15 and 25 kV12.5 thru 24.9 kV(L) Means solid material load interrupters are available and accepted.(LV) Means vacuum interrupters are available and accepted.(PL) Means hooks for portable load interrupters are available for voltages 34.5 kV and below. Consult switch manufacturer concerning loop switching applications at higher voltages.*Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5?kV on request.**Insulators are available in Silicone Rubber, Porcelain, and Cycloaliphatic.sb-1.1July 2009sb - Switch, disconnect (single-pole, hook-operated station class)NEMA standard switches for station or linestructure use where single-pole switching is permissibleManufacturerTypeVoltage RatingsSystem VoltagesLine-to-LineSeecoBT34.5 thru 69 kV34.5 thru 69 kVSiemens-AllisHA15 thru 69 kV12.5 thru 69 kVHS(PL)15 and 25 kV12.5 thru 24.9 kVSouthern StatesPBO15 thru 69 kV12.5 thru 69 kV*PBN15 thru 23 kV12.5, 13.2, 24.9 kVUSCOHH(PL)15 thru 69 kV12.5 thru 69 kV(L) Means solid material load interrupters are available and accepted.(LV) Means vacuum interrupters are available and accepted.* With steel base only.(PL) Means hooks for portable load interrupters are available for voltages 34.5 kV and below. Consult switch manufacturer concerning loop switching applications at higher voltages.sb-2May 2019sb – Switch, disconnect (single-pole, hook operated distribution class)*For distribution line use where power class insulation is not required and single-phase switching is permissible.(Not suitable for substation use)ManufacturerTypeVoltage RatingSystem VoltageLine-to-LineEatonD73P***(PL)15.5, 25.8, 38kV12.5 thru 35.5kVG & W Electric CompanyEV(PL)15 kV12.5 kVHubbell (Chance)M3(PL)15 and 27 kV12.5 thru 24.9 kVM3C15 and 27 kV12.5 thru 24.9 kVKearney/EatonD-73(PL)15 and 25 kV12.5, 13.2, 24.9 kVMorganDHS(PL)15 and 23 kV12.5, 13.2, 24.9 kVRoyal SwitchgearBLT (PL)7.5 thru 34.5 kV 7.5 thru 34.5 kVBILT (PL)7.5 thru 34.5 kV7.5 thru 34.5 kVBISL(PL)15 thru 25 kV15 thru 25 kVS & C**LBD(PL)15 and 25 kV12.5, 13.2, 24.9 kVSiemens-AllisHD(PL)15 and 25 kV12.5 thru 24.9 kVSiemens Energy, Inc.LER (L)(PL)15 and 25 kV12.5 thru 24.9 kVSER (L)(PL)15, 25, and 38 kV12.5 thru 34.5 kVNOTE: Switches on this page must be furnished with four bolts for double crossarm mounting.(L) Means solid material load interrupters are available and accepted.(PL) Means hooks for portable load interrupters are available.(LV) Means vacuum interrupters are available and accepted.*Steel bases only.**Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5?kV on request.***Insulators are available in Silicone Rubber, Porcelain, and Cycloaliphatic.Conditional Listsb(1)April 2014sb - Switch, hookstick(line tension switches)ManufacturerTypeVoltage RatingsSystem VoltagesLine to LineConditionsAluma-Form, Inc.HDS-600A15 kV thru 34.5 kV12.5 kV thru 34.5 kVTo obtain experience.HDS-900A15 kV thru 34.5 kV12.5 kV thru 34.5 kVTo obtain experience.TE Connectivity - EnergyAMPACT (ILD-II)15 kV12.5/7.2 kVTo obtain experience.Bridges12715 kV12.5/7.2 kVTo obtain experience.Hubbell (Chance)ALTD06200R15 kV12.5/7.2 kVTo obtain experience.Royal SwitchgearIL6B-H(available with silicone polymer insulators as catalog number IL6NP)15 kV12.5/7.2 kVTo obtain experience.NOTE: All switches listed on this page have hooks for portable load interrupters.sc-1July 2009sc - Regulators, Voltage12.5/7.2 kV13.2/7.62 kVApplicable Specification: "RUS Specification for Substation Regulators," S-2TypeSizeDescriptionABBUTS, UTT167-1000 kVA(S) Three phase step typeEatonVR-3219.1 - 833 kVA(SL)Single phase - step typeAB50 amp.(L) Single-phase - step type(Auto-Booster)General ElectricVR-138.1 - 509 kVA(SL) Single-phase - step typeMLT500 - 1000 kVA(S) Three-phase - step typeVML-32500 - 833 kVA(S) Single-phase - Vacuum step typeVMLT-321200 - 2800 kVA(S) Three-phase - vacuum step typeSiemens-AllisJFR38.1 - 667 kVA(SL) Single-phase - step type(L) Indicates line use(S) Indicates substation usesc-2July 2009sc - Regulators, Voltage24.9/14.4 kVTypeSizeDescriptionEatonVR-3272 - 833 kVA(SL) Single phase - step typeAB.50 amp(L) Single phase - step type(Auto-Booster)General ElectricVR-172 - 576 kVA(SL) Single phase - step typeVML-32500 - 833 kVA(S) Single phase - vacuum step typeVMLT-321200 - 4666 kVA(S) Three phase - vacuum step typeSiemens-AllisJFR72 - 833(SL) Single phase - step type(L) Indicates line use(S) Indicates substation useConditional Listsc(1)July 2009sc - Regulators, VoltageManufacturerConditionsGeneral ElectricThree-phase, step-type substation regulator Type TMLT-32 (13.2/7.62 kV)To obtain experience.Howard Industries, Inc.Single-phase, 32 step, line/substation, 50, 75, 100, 150, 219, 328, 438, 546, and 656 ampere, 7.62 kV, Type SVR-1Single-phase, 32 step, line/substation, 50, 100, 150, 200, 231, 300, 400, 463, and 578 ampere, 14.4 kV, Type SVR-1To obtain experience.Siemens-AllisThree-phase, step-type substation regulator Type SFR (13.2/7.62 kV)To obtain experience.sd-1March 2018sd - Current TransformersOutdoor TypeManufacturer.6 kV15 kV25 kV34.5 kV69 kVABBCSF/CMSKOR-11ICT-150ICT-200ICT-350CMFKON-11KOR-l5KOR-20-CLC/CLEKOT-11KOT-l5--ArtecheIRH-1IRH-5IRH-7IRH-10IRH-12CRE-17CRB-17ME-015MK-15MI-015KM-15KCB-17CRF-24 CRE-24ME-025MK-25MI-025KM-25KCB-24CRF-36CRF-36(extended range)CRK-36CE-034ME-036MK-36KM-36CRH-72CRK-72CE-069G.E.C. Durham Industries (Astra) AA&TAAB----AD&AC--------Electromagnetic Industries (Square D)CO3-110CO3-150CO3-200lK-350 General ElectricJCR-0JKW-5JKW-6JKW-7JKW-350JCW-0JCK-5JKW-150JKW-200KG-350JAK-0-KG-150KG-200JAD-0----Kuhlman ElectricBB-15-971BB-25-973BB-34-975COF-350BB-15-972BB-25-974BB-34-976-Arteche-CRE-17CRF-24CRF-36-CRB-17CRE-24CRF-36 (extended range)-Ritz Instrument Transformers, Inc.DCBWGIFU 15-01; 0.3 B0.1-1.8GIFU 25-01; 0.3 B0.1-0.9GIFS 36-55; 0.3 B0.1-0.9GIF 72.5-68; 0.3 B0.1-2.0DCCWGIFU 15-01; 0.3 B0.1-0.5GIFU 25-01; 0.3 B0.1-2.0GIF 36-69; 0.3 B0.1-2.0DCABSchlumbergerR6S----R6SA----R6M----R6L----NOTE:The transformer types listed above are accepted in all standard ratios. Insulation class, voltages, ratios and other necessary information should be specified when ordering.sd-1.1April 2020sd - Current TransformersOutdoor TypeManufacturer.6 kV15 kV25 kV34.5 kV69 kVInstrument Transformer Equipment Corp (ITEC)HRP-931HRP-933HRP-930HRP-981HRP-983HRP-984HRP-980HRP-984CTO-200CTO-350CVTO-110CVTO-150CVTO-200CVTO-350NOTE:The transformer types listed above are accepted in all standard ratios. Insulation class, voltages, ratios and other necessary information should be specified when ordering.Conditional Listsd(1)February 2011sd - Current TransformersOutdoor TypeManufacturerConditionsElectromagnetic Ind. (Square D)Type UMCT, 0.6 kVType UCT, 0.6 kVType IK 4-350-69, 69 kV(cycloaliphatic resin bushings)To obtain experience.se-1March 2018se - Voltage TransformersOutdoor TypeManufacturer.6 kV15 kV25 kV34.5 kV69 kVABBPPMVOG-llLPT-l50LPT-200LPT-350-VOY-llVOG-l5VOG-20--VOZ-llVOZ-l5VOZ-20-ArtecheVRL-17URL-17URJ-17VRJ-17ME-015MK-15MI-015KM-15KCB-17URJ-24VRJ-24URN-24VRN-24ME-025MK-25MI-025KM-25KCB-24VRS-36URS-36ME-036MK-36KM-36URU-72VRU-72Electromagnetic Industries (Square D)PO5-110PO5-150PO5-200U3-350-69General ElectricJVA-0JVW-5JVW-6JVW-7ET-350JVP-0JVW-110--JVT-350--JVT-150JVT-200-Kuhlman Electric-PTT-110-977--POF-350Ritz Instrument Transformers, Inc.DVE-6VZF 15-20; 2 Bushing0.3WXYZVZF 25-10; 2 Bushing 0.3WXYZVZF 36-10;2 Bushing 0.3WXYVEF 72-03; 1 Bushing 0.3WXYZDVF-6VZF 15-10; 2 Bushing0.3WXYVEF 25-10; 1 Bushing 0.3WXYZVEF 36-10; 1 Bushing 0.3WXYVEF 15-10;1 Bushing0.3WXYVEF 15-20;1 Bushing0.3WXYZSchlumbergerT5R----T6R----T7R----NOTE:The transformer types listed above are acceptable in all standard ratios. Insulation class, voltages, ratios and other necessary information should be specified when ordering.se-1.1April 2020se - Voltage TransformersOutdoor TypeManufacturer.6 kV15 kV25 kV34.5 kV69 kVInstrument Transformer Equipment Corp (ITEC)SVTO-150SVTO-200VTO-200VTO-350CVTO-110CVTO-150CVTO-200CVTO-350PST-350NOTE:The transformer types listed above are acceptable in all standard ratios. Insulation class, voltages, ratios and other necessary information should be specified when ordering.Conditional Listse(1)July 2009se - Voltage TransformersOutdoor TypesManufacturerConditionsG.E.C. Durham Industries (Astra)Type DB, 0.6 kVType DA, 0.6 kVType DF, 0.6 kVTo obtain experience.Electromagnetic Industries (Square D)Type U-450, 0.6 kVType U-4-350-69, 69 kV(cycloaliphatic resin bushings)To obtain experience.sj-1March 2015sj - Switches, oil circuit recloser by-passManufacturer15 kVFor use on12.5/7.2 kV systems27 kVFor use on 24.9/14.4 kV systems27 kV*For use on 34.5/19.9 kV systemsCurrentRating AmperesEatonD73P**-BE***D73P**-BE***D73P**-BE***600, 900Hubbell (Chance)M3-RM3-RM3-R600Kearney/EatonD73RBD73RB600Siemens Industry Inc.B-2B-2B-2600*Not For Use In Substations**Insulators are available in Silicone Rubber, Porcelain, and Cycloaliphatic.***Option BE means switch is equipped with bypass studs and REA 4 bolt back strap.Conditional Listsj(1)October 2018sj - Switches, oil circuit recloser by-passManufacturer15 kVFor use on12.5/7.2 kV systems27 kVFor use on 24.9/14.4 kV systems27 kV*For use on 34.5/19.9 kV systemsCurrentRating (Amperes)ConditionsHubbell (Chance)BP3BP3BP3600, 900To obtain experienceBPFBPFBPF600sk-1March 2015sk - Switch, regulator by-pass - disconnectFor outdoor useCurrent15 kV for use on27 kV for use onRatingManufacturer12.5/7.2 kV Systems24.9/14.4 kV SystemsAmperesEatonD73P3**D73P3**600, 900Hubbell Power Systems, Inc.BPRBPR600Kearney/EatonHB-65HB-65600S & C Electric*XLXL600Siemens-AllisHRHR600Siemens Industry Inc.B-2B-2600Southern StatesBRBR400,600NOTE: All switches should be furnished with NEMA standard insulators and with 110 kV BIL rating (15 kV systems) or 150 BIL ratings (25 kV systems) for station use.*Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5?kV on request.**Insulators are available in Silicone Rubber, Porcelain, and Cycloaliphatic.Conditional Listsk(1)July 2009sk - Switch, regulator by-pass - disconnectFor outdoor useManufacturerConditionsEatonType B, 15 kV, 400 amperes, 110 kV BIL for station use, 95 kV BIL for line use.To obtain experience.NOTE: All switches should be furnished with NEMA standard insulators and with 110 kV BIL rating for station use.sl-1July 2009sl - Switch, Combination Power Fuse and Disconnect(Used with an additional disconnect switch to by-passoil circuit reclosers at substations)15 kV for use on27 kV for use onManufacturer12.5/7.2 kV systems24.9/14.4 kV systemsJoslyn (Hi-Voltage)RFH-Kearney/EatonMHXMHXS & C Electric*SMD/LBDSMD/LBDXS/LBD-Southern StatesSF-NOTE: All switches and cutouts should be furnished with NEMA standard insulators.*Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5?kV on request.sr-1August 2018sr - Steel Conductor for Substation Grounding, Copper-Clad or Galvanized(See av-2 for copper grounding conductor)ManufacturerTypeSizesAFL Coppercladcopper-clad steel (dead soft annealed)7 No. 6 AWG7 No. 5 AWG7 No. 4 AWG19 No. 9 AWG19 No. 8 AWG19 No. 6 AWG19 No. 5 AWGCopperweld Bimetallics, LLC*Dead Soft Annealed (DSA) Copperweld Conductors7 no 8 AWG2/0 (19x0860” & 7x1379”)7 no 7 AWG7 no 6 AWG7 no 5 AWG7 no 4 AWG4/0 (19x1055”)19 no 9 AWG19 no 8 AWG19 no 7 AWG19 no 6 AWG19 no 5 AWGNOTES:* Theft deterrent versions, both poly-jacketed and camouflaged are acceptable.Minimum 40% conductivity7-strand conductors can be supplied in 19-strand configuration and vice-versa. Conductors chosen must be able to carry the required short duration fault current and must be selected based on IEEE Standard 80.When used in soil with resistivity of 25 ohm-meters (2500 ohms per cubic centimeter) or less cathodic protection must be incorporated into the grounding design.Conditional Listsr(1)August 2018sr - Steel Conductor for Substation Grounding, Copper-Clad or Galvanized(See av-2 for copper grounding conductor)ManufacturerConditionsIndiana Steel & WireSteel Strand, BB Grade, Class C galvanized5/8" (19 wire)1/2" (7 wire)9/16" (7 wire)7/16" (7 wire)1. To obtain experience.2. When used in soil with resistivity of 25 ohm-meters (2500 ohms per centimeter cube) or less, cathodic protection must be incorporated into the grounding design.NOTES:Minimum 40% conductivity7-strand conductors can be supplied in 19-strand configuration and vice-versa. Conductors chosen must be able to carry the required short duration fault current and must be selected based on IEEE Standard 80. Conditional Listsr(2)sr - Conductor for Substation Grounding, alternative conductorManufacturerConditionsConduGroundTo obtain experience.CG-7/16”CG-1”CG-1-1/2”CThor55LbGAP55LbGAP25Lbvx-1March 2012vx - Cross Brace assembly, 3-3/8" x 5-3/8"with hardware and fittings (Dwg. TM-110, RUS Specification T-7)ManufacturerCatalog No.BrooksItem 1-vxItem 2-vx6685-16685-2DIS-TRAN Wood Products, LLCItem 1-vxD2110BHughes BrothersItem 1-vxItem 2-vx1042-11042-2Niedermeyer-MartinItem 1-vxItem 2-vxN-6714-1N-6714-2PenningtonItem 1-vxItem 2-vxCCC-67-1CCC-67-2Cross Brace assembly, 3-5/8" x 7-1/2" Min.with hardware and fittings (Dwg. TM-110, RUS Specification T-8)ManufacturerCatalog No.Brooks6695DIS-TRAN Wood Products, LLCD2110CHughes Brothers2061ANiedermeyer-MartinN6721PenningtonCCC69Conditionalvx(1)August 2014vx - Cross Brace assembly, 3-3/8" x 5-3/8"with hardware and fittings (Dwg. TM-110, RUS Specification T-7)ManufacturerCatalog No.ConditionsPUPIItem 1-vxItem 2-vxXBR3020-1XBR3020-2To obtain experience.Cross Brace assembly, 3-5/8" x 7-1/2" Min.with hardware and fittings (Dwg. TM-110, RUS Specification T-8)ManufacturerCatalog No.ConditionsPART IIUnderground Distribution EquipmentU ae-1July 2009U ae - Surge Arresters, Distributionfor Underground System Pole Risers(Lightning Arresters)SiC TypeManufacturerTypeAcceptedRatings - kVDutyManufacturer'sClassificationHousingABBGLV9, 10NormalDistributionLVBB18NormalDistributionGeneral ElectricAlugard9, 10, 18HeavyDistributionNOTE: The arresters listed on this page may be used singly or in parallel, but must be applied in accordance with paragraph VI.A., in RUS Bulletin 61-3, "Underground Rural Distribution." Other arresters listed on pages ae-1 and ae-2 may be used for underground systems when applied in accordance with this bulletin.Conditional ListU ae(1)January 2015U ae - Arresters, Surge(Shielded for Underground System Pad-Mounted Equipment)CONDITION OF ACCEPTANCE: To Obtain ExperienceELBOW ARRESTERSManufacturerTypeRatings, kVTypeInterfaceEatonM.O.V.E.9/10MOV15 kVM.O.V.E.18MOV25 kVVariGAP9/10(1)15 kVVariGAP18(1)25 kVPosi-Break M.O.V.E.3-21MOV25 kVVariGAP Posi-Break M.O.V.E.9-15MOV25 kVElastimold ESNA167 ESA-1010MOV15 kV273 ESA-1818MOV25 kVHubbell215ELA-1010MOV15kV225ELA-1818MOV25kVJoslynZE10MOV15 kV18MOV25 kV(1) MOV Type (Internally Gapped)Conditional ListU ae(1.1)January 2015U ae - Arresters, Surge(Shielded for Underground System Pad-Mounted Equipment)CONDITION OF ACCEPTANCE: To Obtain ExperiencePARKING STAND ARRESTERSManufacturerTypeRatings, kVTypeInterfaceEatonMOV PSA9/10MOV15 kVMOV PSA18MOV25 kVMOV VariGAP PSA9/10(1)15 kVMOV VariGAP PSA18(1)25 kVElastimold ESNA167 PSA-1010MOV15 kV273 PSA-1818MOV25 kVHubbell215PLA-1010MOV15kV225PLA-1818MOV25kV(1) MOV Type (Internally Gapped)Conditional ListU ae(1.2)January 2015U ae - Arresters, Surge(Shielded for Underground System Pad-Mounted Equipment)CONDITION OF ACCEPTANCE: To Obtain ExperienceBUSHING ARRESTERSManufacturerTypeRatings, kVTypeInterfaceElastimold ESNA167 BSA-1010MOV15 kV273 BSA-1818MOV25 kV(1) MOV Type (Internally Gapped)Conditional ListU ae(2)July 2009U ae - Arresters, Surge(For Underground System Pole Risers)CONDITION OF ACCEPTANCE: To Obtain ExperienceMOV TypeManufacturerTypeAcceptedRatings - kVDutyManufacturer'ClassificationHousingABBHMX9,10,18HeavyRMX9,10,18 Intermediate *XPR9,10,18,27HeavyDistributionPolymerEatonCPS AZR VariSTAR9,10,18,27HeavyDistributionPorcelainURS UltraSIL VariSTAR9,10,18,27HeavyDistributionPolymerGeneral ElectricTranquell ** U.D. II9,10,18,27NormalDistributionPorcelainTranquell9,10,18,27NormalIntermediatePorcelainHubbell (Ohio Brass)DynaVar-PVR9,10,18,27HeavyRiser PolePolymer JoslynZRP9,10,18,27HeavyDistributionPolymer*Has intermediate class arrester characteristics but does not have intermediate class venting capability.**A non-fragmenting U.D. II Arrester is available for 9 & 10 kV designs at higher cost when specified.Conditional ListU ae(2.1)July 2009U ae - Arresters, Surge(For Underground System Pole Risers)CONDITION OF ACCEPTANCE: To Obtain ExperienceMOV Type (Internally Gapped)ManufacturerTypeAcceptedRatings - kVDutyManufacturer'sClassificationHousingEatonURT Evolution9,10,18,27HeavyDistributionPolymerU an-1April 2017U an - Transformers, DistributionPad-Mounted, Dead-Front(For underground application)ManufacturerSingle-Phase5 - 167 kVAThree-Phase30 - 2500 kVAABB"Mini-Pak U-5"Type MTR (75-1500 kVA)"Plazapad-U5" (2000-2500 kVA)Central Moloney"REA-LP"“Three Phase Pad Mount REA”Eaton*"REA Shrubline”"REA Terra-Tran" *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.ERMCO, INC."Low-Profile" “E-PAD”General Electric-"Compad IV - REA"H. K. Porter (Delta-Star)"Low Profile U 5-R""Porter U5-R3"Magnetron S.A.S.Pad Mount 5-167 kVA-Howard"Hi Pad REA""Hi Pad 3 REA"Kuhlman"Lo-Pak ELR""K-PAK-3 REA"CG Power Systems USA, Inc."Turf-Hugger-R""Turf-Hugger-R"United (KAEC)"Pad-Mount" 15-100 kVA (1)“Pad-Mount" 25 & 50 kVA (2)-VanTran"Mini-Pad U5" (1)"VanTran III-U5"NOTESAll acceptances are based on RUS Specification U-5, “Specifications for Pad-Mounted Transformers (Single and Three Phase).”All single-phase and three-phase transformers above accepted for the following voltages (kV) unless otherwise noted: 12.47/7.2; 13.2/7.6; 24.9/14.4; and 24.9/14.4 x 12.47/7.2 dual voltage(1) Accepted for 12.47/7.2 kV and 13.2/ 7.62 kV only.(2) Accepted for 24.9/14.4 kV only.The enclosures for these transformers have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.Not all kVA sizes in above kVA ranges are available from all listed manufacturers.Some of the above single-phase and three-phase transformers are available with internal under oil surge arresters. The availability and type of arresters vary with each manufacturer. The following types of under-oil arresters are acceptable: “UMX”, “Tranquell” and “AZU.”U an-2September 2013U an - Transformers, DistributionPad-Mounted, Dead-Front(For unit residential underground application)(Single-phase, 7.2 kV and 7.6 kV)Manufacturer5 - 25 kVA OnlyABB"Micro-Pak U-5"Central Moloney"REA-Mini-LP"Eaton*"Ranch Runner" *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.ERMCO, INC."REA-MicroTrim"Howard"Spacesaver Pad"NOTESAll acceptances are based on RUS Specification U-5, “Specifications for Pad-Mounted Transformers (Single and Three Phase).”The enclosures for these transformers have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.Conditional ListU an(1)May 2019U an - Transformers, DistributionPad-Mounted, Dead-Front(For underground application)Conditions for Acceptance: To Obtain ExperienceManufacturerTypeABB“Mini-Pak U-5” - Single-phase with composite fiberglass enclosure“Mini Three Phase” (MTP) 30 - 225 kVACam Tran“Cam Tran” - Three-phase, 12.47/7.2 and 13.2/7.6 kV; 30-2500 kVACarteThree-phase, 24.9/14.4 kV, 30 - 2,500 kVAEaton*Single-phase, self-protected with “Magnex” interrupterSingle-phase, self-protected with “AZU” MOV heavy-duty, under-oil arrester *Optional EnvirotempTM FR3TM fluid-filled designs are available, including optimized Eaton PEAK? transformer designs which allow reduced transformer size and/or overload capacity while providing for fire safety, environmental safety, and extended insulation life. This natural ester soybean oil based dielectric fluid is an extremely biodegradable, renewable resource that is classified as a less flammable fluid, and is non-toxic. Envirotemp? and FR3? are licensed trademarks of Cargill, Incorporated. PEAK? is a trademark of Eaton.General Electric“Compad -IV-REA” - Three-phase, 75-750 kVA All above with amorphous metal coresGE-ProlecMini Padmount, Single-phase, 10-167 kVAThree-phase, 12.47/7.2 kV, 45-2,500 kVAThree-phase, 24.9/14.4 kV, 45-2,500 kVASquare DClass 7230 REA - Three-phase, 75-2500 kVA12.47/7.2 kV and 13.2/7.62 kVVan Tran“Mini-Pad U5” - 5-167 kVA, 24.9/14.4 kVPower PartnersSingle-phase 5-167 kVANOTESAll acceptances are based on RUS Specification U-5, “Specifications for Pad-Mounted Transformers (Single and Three Phase).”All single-phase and three-phase transformers above conditionally accepted for the following voltages (kV) unless otherwise noted: 12.47/7.2; 13.2/7.6; 24.9/14.4; and 24.9/14.4 x 12.47/7.2 dual voltageThe enclosures for these transformers have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.Not all kVA sizes are available from all listed manufacturers.U ax-1July 2009U ax - Cutout and Arrester, Combinationfor Underground System Pole RisersNominal SystemVoltageFor 12.5/7.2 kVFor 13.2/7.6 kVFor 24.9/14.4 kVCutout MaximumVoltage Rating7.8 kV15 kV15 kV27 kVApplication1?Risers3?Risers1? and 3?Risers1? and 3?RisersCutout Current Rating100 amps100 amps100 amps100 ampsManufacturerCatalog NumbersABB7.8LBU-II/10 LV15LBU-II/10 LV15LBU-II/10 LV24.9LBU-II/18 LVEatonAFS300B SeriesAFS300C SeriesAFS300C SeriesAFS300D SeriesGeneral Electric9F809F809F809F80Hubbell (Chance)C7 SeriesC7 SeriesC7 SeriesC7 SeriesSouthern StatesCA SeriesCA SeriesCA SeriesCA SeriesNOTE: The units listed on this page may be used with single arresters or arresters in parallel, but must be applied in accordance with paragraph VI.A. in RUS Bulletin 61-3, "Underground Rural Distribution." Other arresters listed on pages ae-1 and ae-2 may be used for underground systems when applied in accordance with this bulletin.Cutouts used on underground riser poles should be loadbreak type or have hooks for portable load interrupters.Either normal duty or heavy duty distribution class arresters listed on page ae-1 are acceptable for use with these combination units.Conditional ListU ax-2July 2009U ax - Cutout and ArresterCombination for Underground System Pole RisersMetal Oxide Type ArrestersNominal System VoltageFor 12.5Y/7.2 kVFor 13.2Y/7.6 kVFor 24.9Y/14.4 kVConditionsCutout MaximumVoltage Rating7.8 kV15 kV15 kV27 kVApplication1? Risers3? Risers1? and 3? Risers1? and 3? RisersCutout Current Rating100 amps100 amps100 amps100 ampsManufacturerCatalog NumbersEatonL4A1P1A00-ECOA(9kV)L9C1P1A00-ECOA(9kV)L9C1P1A00-ECOA(9kV)L9D1P1A00-EGOATo obtain experienceL4A1P1A00-EDOA(10kV)L9C1P1A00-EDOA(10kV)L9C1P1A00-EDOA(10kV)-To obtain experience.Note 1: Other arresters listed on pages ae-1 and ae-2 may be used for underground systems when applied in accordance with RUS Bulletin 61-3, "Underground Rural Distribution."Note 2: Cutouts used on underground riser poles should be loadbreak type or have hooks for portable load interrupters.Conditional ListU be(1)July 2009U be - Reclosers, pad-mountedManufacturerConditionsEatonSingle phase, vacuum interrupter, Type PV4H Maximum voltage 14.4 kV for 12.5 and 13.2/7.62?kVTo obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.U be - Reclosers, vacuum interruption with solid dielectricManufacturerConditionsG & W Electric CompanyThree phase, electronic, VIPER Series, vacuum interruption, solid dielectric, 800 amps maximum continuous, 12,500 amps RMS symmetrical interruption, 15.5 kV maximum for 12.5/7.2 kV, 27 kV maximum for 24.9/14/4 kV.To obtain experience.NOTES:1. Series trip reclosers with ratings greater than 100 amp for 12.5/7.2 kV application, greater than 200 amp for 24.9/14.4 kV application, and 280?amp for 34.5/19.9 kV application are acceptable only with ground trip device. Shunt trip reclosers without ground trip devices may not be used with trip settings higher than 200 amp for 12.5/7.2 kV application, greater than 400 amp for 24.9/14.4 kV application, and 560 amp for 34.5/19.9 kV application.2. Reclosers are not acceptable with load current, bushing CT battery chargers.U cg-1July 2009U cg - Switch, air, three-pole, group-operatedfor pole-mounted cable risers(Factory Preassembled)ManufacturerMountingVertical BreakType kVSide BreakType kVABBVerticalLB3-VR(L)15-Hubbell (Chance)Vertical-D7(L)15-27Horizontal-D7(L)15-27Kearney/EatonHorizontalSB_R(L)15-35-S & C*Vertical-Alduti(L)15-25Horizontal-Alduti(L)15-25(L) Means gas or solid material full-load interrupters are accepted and available.*Available with porcelain insulators. Available with "Cypoxy" cycloaliphatic epoxy insulators through 34.5?kV on request.NOTE: Switches with factory-assembled crossarm type bases must have nonconducting crossarm type bases, nonconducting braces, and insulated interphase and control rods.Conditional ListU cg(1)July 2009U cg - Switch, Air, Three-Pole, Group OperatedManufacturerConditionsHubbell (Chance)Type AR side-break, horizontal and vertical mounting, with non-conducting crossarm type base and insulated interphase and control rods, 15, 25 , and 34.5 kV (grounded wye)To obtain experience.S & C*Omni-Rupter (L), side break horizontal and vertical mounting with non-conducting crossarm type base and insulated interphase and control rods, 15 kV and 25 kVTo obtain experience.(L) Means full-load interrupter accepted and available.*Available with porcelain insulators. Available with Cypoxy insulators through 34.5 kV on request.U fw-1March 2013U fw - Secondary Tap ConnectorManufacturerType or Catalog No.TE Connectivity - EnergyCompression ConnectorsCRSM-CT-34/10-150CRSM-CT-53/13-200CRSM-CT-84/20-250Standard Split BoltCRSM-CT-53/13-200U fz-1March 2020U fz – Transformer Connector Block, InsulatedMultiple Cable ConnectorsWatertight – For use in all locationsManufacturerConnection TypeCatalog NumberBlackburnLugSCU, with lugs and sleevesBurndyLugStud Mole with sealing sleevePolarisSet ScrewIPLWB, SLWB, SSWB, SLOWBUtilcoSet ScrewPTF-SS, Watertight insulated transformer connector blockNon-Watertight - For use in above grade locations onlyAFLLugInterchange 1ABBD Series (Disconnectable) Use with A9 insulating bootsAlconSet ScrewVBTT Series with double sealing sleeveBlackburnSet ScrewTSB-J58C (Permanent)Set ScrewTSB-D58C (Disconnectable)BurndySet ScrewK-D Series (Disconnectable)K-DF Series (Permanent)Durham CompanySet ScrewUB SeriesSet Screw9112212 250 Splice-n-TapLugUT SeriesConnector Mfg. Co.Set ScrewUni-Joint Bar Connectors, (Series RLS, NSM-C, NDS-C, NSC, ZS-C, ZSU-C, RLUS) (Permanent)Set ScrewUni-Joint Bar Connectors,(Series RLSS, NSSM-C, NSSC, ZQC, ZQUC, RLUSS) (Disconnectable)ESPLugTypes SUR and RDSR(Removable)(With Types LA and AL-lugs and Sleeve kits)Set ScrewType UPSO-I (Permanent)Type UPM-I (Disconnectable)HomacLugDF SeriesLugFTU 125 Series(Disconnectable) with flood seal sleeve kitSet ScrewABD, ABK, ABS, ABW, CLRTR, CSW, CSS, LRT, RAU, EZC, Z series;ZBK with SB covers;ZVW with bootHubbell (Fargo)BoltedGUC SeriesSet ScrewGUS-460S SeriesMacLean (Reliable)Set Screw15912-REA (Disconnectable)Penn UnionLugType DBAT (Permanent)LugType DBAT-LH (Disconnectable)Use with Series DBTB, DBTBF and DBTH lug and Sleeves kitsPolarisSet ScrewPLTZ-CC, PSMTLCC, PSMTLSCSet ScrewPTLZ-CC, PSMTLCC, PSMTLSCSet ScrewIPCTLZ, IPCTLEZ, PSMTLECCSet ScrewPSMTLESC, PTLZSC, PTLZCC, IPPTPreformedSet ScrewSC-C series (Permanent)Set ScrewCSC-Q-C Series, SC-Q-C series (Disconnectable)UtilcoSet ScrewPTF-IN (Permanent)Set ScrewPTF-CJNU, PSS Series (Disconnectable)Vector Connectors Corp.Set ScrewTQL Series (Disconnectable) (with insulating boot)Note:Additional insulation may be required with some of the above-listed secondary terminal blocks due to the irregularity of mating surfaces between various secondary studs being supplied by the transformer manufacturers.U gc-1October 2015U gc - Shield, cable riserManufacturerDia. (Inches)Length (Feet)Galvanized SteelAlmat Metal Limited2 1/48Electrical Materials2 - 3 - 4 - 5*5*Hubbell (Chance)2 - 3 - 31/25 - 9Joslyn2 - 3 - 31/2*5 - 8*Midland-Ross2 1/2 - 3 1/2 - 52 1/2 - 5 - 10 (Kindorf Snapduct)(14 ga. galv. steel)Plastic and FiberglassApplied Extrusion Technologies (plastic)2 - 3 - 4 - 5 - 6*5 - 8 - 10*(Power Mold, I, II, III)Carlon2 - 3 - 4 - 5 - 6*l0*Charles Industries 2 – 3 – 4 – 5**5 and 10**Custom Plastics2 - 3 - 4 - 5*5 - 10*Electrical Materials (plastic)1 - 2 - 3 - 4 - 5- 6*5 - 8 - 10*Joslyn (plastic)2*10*(Order by size and length)*All sizes available with back plate.Full Round**Smith Fiberglass Products2 - 3 - 4 - 530 (standard wall)**Full round riser shield is to be mounted directly to the surface of the pole with no standoffs.U gk-1December 2015U gk - Terminations, Indoor(When ordering specify conductor size, type, whethercopper or aluminum and insulation diameter)ManufacturerCatalog No.PREMOLDEDEatonFasterm Stress Cone (15 & 25 kV)Elastimold (ESNA)Style 35-MSC (15, 25 & 35 kV)Hubbell (Chardon)Termi-Matic, Type A or G (15, 25 & 35 kV)HEAT SHRINKDSG-CanusaCT Series (15kV, 25kV, 35kV)G&WESTS15_PLA (15 kV)ESTS25_PLA (25 kV)HellermannMVTS15_PLA (15 kV)MVTS25_PLA (25 kV)TE Connectivity - EnergyHVT (15, 25 & 35 kV)COLD SHRINK3MQT III Series (15 kV)Quick Term II Series (25 & 35 kV)DSG CanusaTITAN-Z Series (15, 25 kV)TITAN Series (35 kV)JoslynJIPT Series (15, 25 kV)JPT Series (25 kV)TE Connectivity - EnergyTFT Series (15, 25, 35 kV)INSULATED WRAPPlymouth/BishopStress-Wrap (15, 25 & 35 kV)U gk-2April 27, 2021U gk - Terminations, outdoor(with mounting hardware) *PREMOLDED(When ordering, specify conductor size, type, whether copper or aluminum, insulation diameter, and type of mounting desired)ManufacturerCatalog NumberEatonFasterm Series (15 & 25 kV)Elastimold (ESNA)Style 16-THG (15 and 25 kV)(for bare concentric neutral cable)Style 35-MT (35 kV)(for bare concentric neutral cable)Style PCT-1 (15 kV) (for jacketed cable)Style PCT-2 (25 kV) (for jacketed cable)Hubbell (Chardon)Termi-Matic, Type G (15, 25 and 35 kV)*Mounting Hardware is used to attach termination to mounting bracket (U hd or U hj).NOTE: Some of the above terminators may require ordering the mounting hardware separately.U gk-2.1April 27, 2021U gk - Terminations, outdoor(with mounting hardware) *HEAT SHRINK(When ordering, specify conductor size, type, whether copper or aluminum, insulation diameter, and type of mounting desired)ManufacturerCatalog NumberDSG-CanusaCT Series (15kV, 25kV, 35kV)G&WESTS15_PLO (15 kV)ESTS25_PLO (25 kV)HellermannMVTS15_PLO (15 kV)MVTS25_PLO (25 kV)Plymouth/BishopSWO Kit (15, 25 and 35 kV)TE Connectivity - EnergyHVT (15, 25 and 35 kV)*Mounting Hardware is used to attach termination to mounting bracket (U hd or U hj).NOTE: Some of the above terminators may require ordering the mounting hardware separately.U gk-2.2April 27, 2021U gk - Terminations, outdoor(with mounting hardware) *COLD SHRINK(When ordering, specify conductor size, type, whether copper or aluminum, insulation diameter, and type of mounting desired)ManufacturerCatalog NumberDSG-CanusaTITAN-Z Series (15, 25 kV)TITAN Series (35 kV)JoslynJPT Series (15, 25, 35 kV)TE Connectivity - EnergyTFT Series (15, 25, 35 kV)3MQT III Series (15, 25, & 35 kV)PrysmianPCT Series (15, 25, 35 kV)*Mounting Hardware is used to attach termination to mounting bracket (U hd or U hj).NOTE: Some of the above terminators may require ordering the mounting hardware separately.U gk-2.3April 27, 2021U gk - Terminations, outdoor(with mounting hardware) *PORCELAIN(When ordering, specify conductor size, type, whether copper or aluminum, insulation diameter, and type of mounting desired)ManufacturerCatalog NumberG & W"Eliminator" 15 kV, E25 kV, E35 kV, EJoslyn"Easy-On II" (15, 25 and 35 kV)*Mounting Hardware is used to attach termination to mounting bracket (U hd or U hj).NOTE: Some of the above terminators may require ordering the mounting hardware separately.U gn-1December 2019U gn - Enclosures, equipmentApplicable Specifications: "RUS Specifications for Equipment Enclosures," U-4ManufacturerCatalog No.DurhamAT-42 Series (dead-front) AT-54 Series (dead-front)ElliottEPM-PTS (dead-front) Hoffman Enclosures, Inc.UJ SeriesHubbellP134, P234, P358, P378American Padmount SystemsAPS Series (dead-front)MaysteelEL100 (dead-front)NordicND-28 and ND-33NOTE:The above enclosures are available with various multipoint terminations. The owner should specify termination points to be provided.These enclosures have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.U gn-2May 6, 2021U gn - Enclosures, EquipmentSectionalizing EnclosuresManufacturerCatalog No.Aluma-FormENC SeriesBrooks Utility Products GroupSingle Phase750-7437-001, 750-7437-002, 750-7437-003,750-7437-004Three Phase750-7438-001, 750-7438-002, 750-7438-003, 750-7438-004, 750-7438-005, 750-7438-006, 750-7438-007EatonSecTER Series I and II (Single-Phase and Three-Phase)*DurhamAM SeriesHighline ProductsFSC-29 Single PhaseFSC-32 Single PhaseFSC-33 Single PhaseFSC-55 Three PhaseFSC-62 Three Phase FSC-65 Three PhaseFSC-69 Three PhaseFSC-71 Three PhaseFSC-79 Three PhaseFSC-85 Three PhaseMaysteelCW200 SeriesCW300 SeriesNordicND SeriesPower Design Inc.Type CJP series, single-phase and three-phase, 15 and 25 kVRough Rider IndustriesSeries RUF93ShallbetterSPMS Series (dead-front)NOTES:The above enclosures are available with various multipoint terminations. The owner should specify termination points to be provided.These enclosures have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.* Also available as a Cleer SecTER cabinet with the Cleer, 600 amp load break connector assemblies installed for both 15 kV and 25 kV systems.U go-1August 2019U go - Fault Indicator(For Construction Unit UM 6-4)ManufacturerTypeEatonS.T.A.R. CR, DR, ER, MR, TPREdison Control CorporationSeries EC100 (single phase)Series EC300 (three phase)(Available with mounting kit KT5002)E. O. SchweitzerAutoRANGER AR-OHFisher PierceSeries 1514 (current reset, single-phaseSeries 1515 (current reset, three-phase)Series 1541 (time reset, single-phaseSeries 1543 (time reset,three-phaseSeries 1547 (adaptive trip)Horstmann GmbHFCI-LT SeriesTime Reset29-621429-6215Current Reset29-611429-6115Navigator LoadTracker (LT)41-2001Smart Grid SolutionsFI-3CNote: Fault indicators that require the drilling or cutting to the enclosure for mounting are not acceptable.U gp-1March 2013U gp - Connector Blocks and Splices, SecondaryWatertight - For Use In All LocationsManufacturerConnection TypeCatalog NumberAlconSet ScrewVPB SeriesBlackburnLugSeries UP (with lugs and sleeves)Set ScrewSeries USB (1000 amp bus with sleeves)BurndyLugURD MoleConnector Mfg. pressionUtilug Sure Seal Splice Kits, Series SSK, SSKLSet ScrewUni-Joint Sure Seal Series SSBCSet ScrewSecondary Connector ULS2-350ESPLugType UC (8 AWG - 500 kcmil) (with LA lug and sleeve)Set ScrewType UPPHomacConnector Blocks:LugFS-95 Series with flood seal sleeve kit (8AWG - 350 kcmil)LugFS-125 Series with flood seal sleeve kit (350 - 500 kcmil)Set ScrewSHC SeriesSet ScrewRAB SeriesSplices:CompressionRRK Series (#2AWG - 350 kcmil)Set ScrewUH11LSet ScrewUSK SeriesSet ScrewMTB SeriesHubbell (Fargo)Set ScrewGU-600 SeriesKearney/EatonCompressionHCRCompressionHARMacLean (Reliable)Set Screw15903-15908, 15910 with sleeve kit (4 AWG - 350 kcmil)15911 with sleeve kit (500 - 750 kcmil)Penn UnionLugDBA Series with DBTB, DBTBF and DBTH Series lug and sleeve kitsPreformedSet ScrewHT Kit SeriesTE Connectivity - EnergySet ScrewGILS-4/0UtilcoSet ScrewSafety Sub Splice - USPA-350SSSet ScrewSafety Sub Tap Connector - PED-350SSU gp-2July 2009U gp - Secondary Connector Blocks and Splices, InsulatedNon-Watertight - For Use In Above-Grade Pedestals OnlyManufacturerConnection TypeCatalog NumberBlackburnSet ScrewType PSB-CConnector Mfg. Co.Set ScrewUni-Joint Series NCAESPSet ScrewUPC SeriesHomacSet ScrewCLR-350 SeriesSet ScrewPVAB SeriesHubbell (Fargo)Set ScrewGUS-460 SeriesPolarisSet ScrewIPLCIlsco (Utilco)Set ScrewPED-350CP Series PED-500CP SeriesVector Connectors Corp.Set ScrewPC SeriesU gq-1July 2009U gq - Boot or sleeve, insulated*ManufacturerCatalog NumberBlackburnMPC9MPC15Electrical Materials100-B (For pad-mounted transformer spade terminals)*Use restricted to 120/208 volt 500 kVA transformers and larger not equipped with threaded studs.U gu-1February 2013U gu - Pedestal, Power(Above-Grade)Refer to Construction Drawing UK5Applicable Specifications: "RUS Specifications for Secondary Power Pedestals," U-6ManufacturerInside DimensionsInchesHeightInchesCatalog No.API6 x 632API 6 x 69 x 1025-1/2API 9 x 1010 x 1134API 10 x 1110 x 1112-1/4API 10 x FM 10 x 1172API 10 x 11XL10 x 1422-1/2API 10 x 1410 x 1426-1/2API 10 x 14 WB16 x 2838API 16 x28 13 Dia.25API 176Coil Sales(Charles Industries)8.25 Dia31-1/2CPLP-88.25 Dia31-1/2CPLP-8I(Integral Stake)10.75 Dia31-1/2CPLP-1010.75 Dia31-1/2CPLP-10I(Integral Stake)Electrimold14.5 x 19.531.5EFSO-111630Highline Products14 X 931FSP140931AA15.5 X 15.530FSP151530AA15.5 X 15.536FSP151536AA14 X 936FSP140936AA9 X 931FSP090931AAHubbell Power Systems, Inc.10 x 1530SP10153010 x 1536SP10153611 x 2130SP11213011 x 2136SP112136MacLean (Reliable)8 x 838UP 8HLP8 x 846UP 8HP10-1/2 x 10-1/226UP 10HLP16-1/2 x 10-1/236UP 1016HLP10-1/2 x 10-1/242UP 10HPU gu-1.1March 2018U gu - Pedestal, Power(Above-Grade)Refer to Construction Drawing UK5Applicable Specifications:"RUS Specifications for Secondary Power Pedestals," U-6ManufacturerInside DimensionsInchesHeightInchesCatalog No.Nordic Fiberglass, Inc.15 x 1530PSP-1515309 X 1330PSP-913309 x 1336PSP-9133610 X 1538PSPF-10153815 x 1538PSPS-101538-MG-X15 x 1544PSPS-101544-MG-X8 x 844PR-50, PR-559 x 1430PR-149 (stake)9 x 1430PR-150 (stakeless)9 x 1430PRMC 150 (low profile)9 x 1424PRMC-160 9 x 1430PRMC-170 (high profile)9 x 1436PRMC-190 21 x 2115PHH-21211516 x 1912PHH-16191210 x 1830PSPX-101830-MG15 x 2315PHH-152315-MGPenCell Plastics, Inc.10-1/2 X13-1/224-1/2AG-14 (low profile)10-1/2 X13-1/230-1/2AG-14 (high profile)11X1437AG-1513X17.530.5AG-1810-3/4X14-1/434AG-207-1/2 round38AG-8820-EWB17 x 3034AG-1730-EWBShallbetter7.5 x 10.2539SUTP SeriesUtility Fiberglass27 x 1640PPFP-2700Vertex8 x 1430SP 814*Furnished with stake.**Pole mountedU gu-2July 2009U gu - Power Pedestal(Below-Grade)Refer to Drawing UK6Applicable Specifications: "RUS Specifications for Secondary Power Pedestals," U-6ManufacturerCatalog No.ArmorcastPolymer concrete frame and cover with fiberglass reinforced polyester skirting 6001 Series.P600XXXXA Rotocast Series, molded polyethylene with penta-head boltAssociated PlasticsMolded polyethylene with galvanized steel or plastic cover Catalog Nos. 1730-1, 3; 1324-1, 3BlackburnMolded polyethylene with galvanized steel cover and ground lug.Catalog No. SDR-2PGBurndyMolded polyethylene with galvanized steel cover.Catalog No. URD20G23CarsonMolded polyethylene with plastic coverCatalog No. 1324-12B and 1730-12BH910, HLW1212, H1118, H1324, H1730, H1730, H2436, H3048, HH3060CDR Systems (Homac)Fiber reinforced polymer concrete - PA Series with penta-head boltsChristy ConcretePolyester reinforced plastic - Series FL8TRCBOX, FL9TRCBOX, FL30TRCBOX, FL36TRCBOX, SYN1118TBOX, SYN1212TBOX, SYN1324TBOX, SYN1730TBOX, SYN2436TBOX, SYN3048TBOX, and SYN3660TBOXDexolHDPE, DX-101, DX-102ABS, DX-101HD, DX-102HDElectrimoldPolymer concrete ring and cover with fiberglass reinforced skirting ECAB series.Boxes EPBTH,EPBA seriesHighline ProductsFHH Series, FiberglassCHA Series, Fiberglass polymer concrete hybridU gu-2.1December 2019U gu - Power Pedestal(Below-Grade)Refer to Drawings UK6Applicable Specifications: "RUS Specifications for Secondary Power Pedestals," U-6ManufacturerCatalog No.Hubbell (Fargo)HDPE, B-100R Series ABS, B-200R SeriesHL51American Padmount SystemsFiberglass secondarypedestal FSP31139, FSP301515NewbasisFiber reinforced polymer concrete box, ring and cover – PCA SeriesFiber reinforced polymer box with polymer concrete ring and cover – FCA SeriesPenCellPE Series-High Density Polyethylene (HDPE) base;lid available in HDPE, fiberglass, aluminum, or stainless steel; PEM Series with modular construction, DT Series – heavy duty HDPE for vehicular trafficQuazitePower Pedestal – PV, Boxes - PX/PE Series, PR/LR Series, PC, PG, LG SeriesSynertech Moulded ProductsS1212, S1118, S1324, S1730, S2436, S3048 and S3660ThermodynamicsPP91, PP92, PP94, PP96, PP97, PP98, PP03, PPV91, TEVC132415ASY, TEVC121612ASY, and TEVC122016ASY seriesU gv-1July 2009U gv - Stake, Power PedestalRefer to Construction Drawing UK5Catalog No.ManufacturerLength InchesFor Power Pedestal OnlyFor Joint PedestalHubbell (Fargo)42-60-72-78UP-530S SeriesUP-530J SeriesMacLean (Reliable)72-78-84DM SeriesDM SeriesU hb-1September 2015U hb - Cable Accessories(When ordering specify conductor size, type whether copper or aluminum and insulation diameter)(Items on this page are rated for operation on three-phase systems and may be used on single-phase systems.)200 Ampere Continuous Current RatingManufacturerCatalog No.Eaton 15 kV, used with loadbreak connectors LPC 215 protective cap LBI215 bushing well insert 2637869C01M rotatable two-way bushing well insert 2604231B01 bushing well plug 25 kV, used with loadbreak connectors LPC 225 protective cap LB1225 bushing well insert LB1225L (long) bushing well insert 2637881C01M rotatable two-way bushing well insert 2604231B01 bushing well plug 35 kV, used with loadbreak connectors 2637592B03M protective capHubbell15 kV, used with loadbreak connectors215BI bushing well insert215IC insulating cap215FTI feed-thru insert 25 kV, used with loadbreak connectors225BI bushing well insert228IC insulating cap228FTI feed-thru insertU hb-1.1October 26, 2020U hb - Cable Accessories(When ordering specify conductor size, type, whethercopper or aluminum and insulation diameter)(Items on this page are rated for operation on three-phase systems and may be used on single-phase systems.)200 Ampere Continuous Current RatingManufacturerCatalog NumberElastimold (ESNA)15 kV, used with loadbreak connectors Style 1601-CL cable lead Style 1602A3R feed thru insert Style 1601-A3R bushing plug Style 160-DR insulating cap25 kV, used with loadbreak connectors Style 2701-A2 bushing plug Style 270-DR deadend receptacle35 kV, used with loadbreak connectors Style 3701A-3 bushing plug* Style 370DR(G) insulating capTE Connectivity – Energy15 kV, used with loadbreak connectorsELB-15-210 series without jacket sealELB-15-210-ES series with jacket seal25 kV, used with loadbreak connectorsELB-25-210 series without jacket sealELB-25-210-ES series with jacket seal25 kV, used with loadbreak connectors (without test point)ELB-25-200 series without jacket sealELB-25-200-ES series with jacket seal15 kV, used with loadbreak connectors (without test point)ELB-15-200 series without jacket sealELB-15-200-ES series with jacket sealU hb-2February 18, 2022U hb - Cable Accessories(When ordering, specify conductor size, type, whether copper or aluminum and insulation diameter)600 Ampere Continuous Current RatingManufacturerCatalog NumberHubbell15 kV, used with non-loadbreak connectors615 Series25 kV, used with non-loadbreak connectors625 Series Eaton15 kV Deadbreak termination connectors Bol-T System T-OP II System Push-OP System DBA615 Bushing Adapter25 kV Deadbreak termination connectors Bol-T System T-OP II System Push-OP System DBA625 Bushing Adapter35 kV Deadbreak termination connectors Bol-T System T-OP II System Push-OP System Optional 200 A. loadbreak tap No. 2637449CElastimold (ESNA)15 kV, used with non-loadbreak connectors 600, 650 Series25 kV, used with non-loadbreak connectors K600, K650 Series35 kV, used with non-loadbreak connectors 750LR SeriesU hb-2.1April 2014U hb - Cable Accessories(When ordering, specify conductor size, type, whether copper or aluminum and insulation diameter)600 Ampere Continuous Current RatingManufacturerCatalog Number3M15 kV, Deadbreak termination connectors 5815 Series Modular Splicing SystemTE Connectivity – Energy15 kVDeadbreak termination connectorsELB-15-600without test pointELB-15-600 with test point25 kVDeadbreak termination connectorsELB-28-600without test pointELB-28-600 with test point35 kVDeadbreak termination connectorsELB-35-600without test pointELB-35-600 with test pointU hb-2.2February 18, 2022U hb - Cable Accessories(When ordering, specify conductor size, type, whether copper or aluminum and insulation diameter)600 Ampere Continuous Current RatingManufacturerCatalog NumberRichards Manufacturing Co.15kV, Deadbreak Elbow LC Series System15kV, Deadbreak Elbow/ Cold Shrinkable Cable Entrance CSH Series | Cold Shrink Hammerhead System15kV, Deadbreak Elbow w/integral 15kV 200A Loadbreak Tap Plug R800 Series System15kV, Deadbreak Elbow w/integral 15kV 200A Loadbreak Tap Plug and Cold Shrinkable Cable Entrance CS8 Series | Cold Shrink R800 System25kV, Deadbreak Elbow LC Series System25kV, Deadbreak Elbow w/ Cold Shrinkable Cable Entrance CSH Series | Cold Shrink Hammerhead System25kV, Deadbreak Elbow w/integral 25kV 200A Loadbreak Tap Plug R800 Series System 25kV, Deadbreak Elbow w/integral 25kV 200A Loadbreak Tap Plug and Cold Shrinkable Cable Entrance CS8 Series | Cold Shrink R800 SystemConditional ListU hb(1)July 2009U hb - Cable Accessories(When ordering specify insulation diameter)Concentric Neutral Clamps (Bonding)ManufacturerConditionsHarcoURD cable clamp1. To obtain experience.2. Only for bonding of anodes or other metals to the neutrals of existing cable installations.3. Not to be used to connect neutral to grounding electrodes.U hc-1March 2014U hc - Cable Supports15 and 25 kVManufacturerCatalog NumberGrip Dia. Range (inches)Aluma-FormCS-800 Series0.75 to 2.0Economy Cable GripSPJ087-U0.87 to 1.00SPJ100-U1.00 to 1.12SPJ113-U1.12 to 1.25SPC125-S-U1.25 to 1.50Hubbell (Fargo)GJ-8540.718 to 0.919GJ-8550.920 to 1.12GJ-8561.12 to 1.50Kellums022-16-0110.81 to 0.94022-16-0120.87 to 1.00022-16-0130.94 to 1.06022-16-0141.00 to 1.18022-16-0151.06 to 1.25022-01-0181.25 to 1.50LewisA-U-SW-180.75 to 1.25U-1.121.12 to 1.62MacLean Power SystemsMCS-8200.75 to 3.0Slater FCSD 140.82 to 0.95FCSD 150.88 to 1.00FCSD 160.95 to 1.06FCSD 171.01 to 1.19FCSD 181.07 to 1.26FC125-U1.25 to 1.50Woodhead35032 (SC075-U)0.75 to 0.9935033 (SC100-U1.00 to 1.2435034 (SC125-U)1.25 to 1.49U hd-1October 2015U hd – Brackets, pothead mounting, and Brackets, combination pothead and arrester mountingManufacturerSingle PhaseThree PhaseAluma-FormTB-EMB-1-2PATB-EMB-1-6PAMacLean Power Systems-MTB-EMB-1-6-PAU he-1May 24, 2022U he – Padmounted Switchgear12.5/7.2 kVManufacturerCatalog NumberABBUTE, PAD-PAK pad-mounted switching device, single and three-phase, 300 amp*ME Fused Series, single and three-phase pad mountedDurhamAFSP Series, single-and three phaseElectrical EquipmentFTDF-P Series, single and three-phase one and two fused taps, pad-mountedElliottType EPMR, single and three-phase, pad-mountedHoward IndustriesSwitch-Pad pad-mounted switching and fusing cabinet,single and three-phaseShallbetterSPMD Series, single and three-phase, pad-mountedSPMC Series, 200 ampere single-pole switching*Furnished with current limiting fuses.NOTES:1. Enclosures on this page must comply with the dead-front requirements of RUS Spec. U-4.2. These enclosures have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.3. Single-pole switching of three-phase underground circuits may cause ferroresonance.U he-2May 24, 2022U he – Padmounted Switchgear24.9/14.4 kVManufacturerCatalog NumberABBUTE, PAD-PAK pad-mounted switching device, single and three-phase, 200 ampME Fused Series, single and three phase, pad- mountedDurhamAFSP Series, single-and three phaseElliottType EPMR, single- and three-phase, pad-mountedHoward IndustriesSwitch-Pad pad-mounted switching and fusing cabinet, single andthree-phaseShallbetterSPMD Series, single and three-phase, pad-mountedNOTES:1. Enclosures on this page must comply with the dead-front requirements of RUS Specification U-4.2. These enclosures have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.3. Single-pole switching of three-phase underground circuits may cause ferroresonance.U he-3.1July 2017U he – Padmounted Switchgear(200 and 600 amp)ManufacturerCatalog NumberEatonType VFI*, single-phase and three phase, padmounted fault interrupters, 15-35 kVType R-VAC*, three-phase vacuum switchgear, 15-25 kV*Eaton Envirotemp FR3 dielectric fluid is available as an optionElastimoldType MVS, single-phase and three phase, 200 and 600 amp, 15-38 kVType MVI, single-phase and three phase, 200 and 600 amp, 15-38 kVElliottType EPMR, Single and three-phase, pad-mounted, 25 kVERMCO, INC.Type FusePad, single-phase, 200 and 600 amp, 15-35 kVType ECO-PAD, three-phase, 200 and 600 amp, 15-35 kVFederal PacificType PSI-PSI/II Series, 15 kV, 25 kV, 600 amp., three-phase switching, and 200 amp., single-phase switching. (When ordering, add suffix B-4)Type PSE Series, 15 kV, 25 kV, 600 amp switch, 200 amp fuseG & W Electric CompanyType PVI series, single-phase and three-phase, 200 amp and 600 amp, 15 kV and 25 kVTrident type solid dielectric switches, single-phaseand three-phase, 200A, 630A, and 800A, 15 kVthrough 35 kVHubbell (Chance)Type LVS (pad-mounted) single-phase and three-phase, vacuum switching equipment, fused or unfused, 200 or 600 amp, 15-25 kVType AIS padmounted, air insulated switchgear, fused or unfused, 200 or 600 amp, 15 kV or 25 kVNotes:Enclosures on this page must comply with the deadfront requirements of RUS Spec. U-4.These enclosures have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.Single-pole switching of three-phase underground circuits may cause ferroresonance.U he-3.2December 2019U he – Padmounted Switchgear(200 and 600 amp)ManufacturerCatalog NumberKearney/EatonSeries VP - submersible, single-phase and three-phase, vacuum switching, 200 or 600 amp, 15 and 25 kV, with or without VACOP remote operatorABBMES 100 Series, pad-mounted single phase and three phase switchingScott EngineeringType SPM-REA, 15 kV, 25 kV, 600 amp., three-phase switching, and 200 amp., single-phase switchingS & CMark III, Model PMH (with option G-7), 15-25 kV, 600 amp., three-phase switching and 200 amp., single-pole switchingModel PME-15-25 kV, Fully enclosed live parts at all times, three-phase switching and 200 amp single pole switchingTrayer800 Series, pad mounted three-phase vacuum switching equipment, 200 and 600 amp, 15-25 kV with or without fusing501 submersible vacuum fuse 15-25 kV enclosure, deadfront 200 or 600 amp., 15-25 kVType SSA (submersible, fused and unfused) 200 and 600 amp., 15-25 kVNotes:1. Enclosures on this page must comply with the deadfront requirements of RUS Spec. U-4.2. The enclosures have been certified as meeting the requirements of ANSI C57.12.28. A copy of the certification is available from the manufacturer.3. Single-pole switching of three-phase underground circuits may cause ferroresonance.Conditional ListU hf(1)March 2013U hf - Jacketed Cable Restoration Kits(For resealing concentric neutral wires after installation of splices in jacketed underground cable)(When ordering, specify diameter of cable over jacket)ManufacturerConditionsElastimoldPCS-1 Power Cable SealTo obtain experience.HomacCNC Series Concentric Neutral CoverTo obtain experience.JoslynShrinklite JRS SeriesTo obtain experienceTE Connectivity - EnergyWCSM (Tubing Type)MWTM (Tubing Type)CRSM (Wraparound Type)To obtain experience.3MHSJ Series (Heat Shrink)SJ Series (Cold Shrink)To obtain experience.Conditional ListU hf(2)March 2013U hf - Terminator Sealing Kits(For resealing concentric neutral wires after installation of elbows or outdoor terminations on jacketed underground cable.)(When ordering, specify diameter of cable over jacket.)ManufacturerConditionsEatonJS200 Elastic SealTo obtain experience.Elastimold200 ECS Elbow Cable Shield, Cold ShrinkTo obtain experience.HomacCNC Series Concentric Neutral CoverTo obtain experience.TE Connectivity - EnergyESA, Heat ShrinkTo obtain experience.3M8450 Series, Cold ShrinkTo obtain experience.Conditional ListU hf(3)March 2013U hf - Jacketed Cable Grounding Kits(For connecting a grounding lead wire to the concentric neutral wires and resealing the jacket)(When ordering, specify diameter of cable over jacket)ManufacturerConditionsCANUSA-EMIModel CFGK-REA Cable Grounding KitTo obtain experience.TE Connectivity - EnergyModel JGK Cable Grounding KitTo obtain experience.3M Model 2252 Cable Grounding KitTo obtain experience.U hj-1July 2009U hj - Bracket, combination arrester, cutout and pothead mountingApplicable Drawing: UA1, UA2, UA3ManufacturerSingle Phase Three-PhaseAluma-Form1HCA-18-1PB Series-U hp-1September 2015U hp - Terminations, Elbow(rated for switching on three-phase systems)(When ordering, specify conductor size, type, whether copper or aluminum and insulation diameter)ManufacturerCatalog NumberEaton15 kV, Loadbreak SBT IV LE215T Series with test point LE215 Series without test point LEJ215T Series with integrated jacket seal; with test point LEJ215 Series with integrated jacket seal; without test pointNote: LE215, LE215T manufactured in U.S.A. and Taiwan.25 kV, Loadbreak SBT LE225T Series with test point LE225 Series without test point LEJ225T Series with integrated jacket seal; with test point LEJ225 Series with integrated jacket seal; without test pointThomas & Betts (Elastimold)15 kV loadbreak Style 161 LR Series, without voltage test point Style 162 LR Series, with voltage test point Style 161LRJS Series, without voltage test point, with integral jacket seal Style 162LRJS Series, with voltage test point, with integral jacket seal25 kV loadbreak Style 261 LR Series, without voltage test point Style 262 LR Series, with voltage test point Style 261LRJS Series, without voltage test point, with integral jacket seal Style 262LRJS Series, with voltage test point, with integral jacket seal35 kV loadbreak Style 375LR Series, without voltage test point Style 376LR Series, with voltage test pointHubbell15 kV, Loadbreak215LE--, without test point215LE--T, with test point215LEJ--, integral seal without test point215LEJ--T, integral seal with test point25 kV, Loadbreak228LE--, without test point228LE--T, with test point228LEJ--, integral seal without test point228LEJ--T, integral seal with test point35 kV, Loadbreak236LE--, without test point236LE--T, with test pointRichards Manufacturing Co.15 kV, Loadbreak Style 21LBN Series, without voltage test pointStyle 21LBT Series, with voltage test pointU hq-1June 2014U hq - Terminations, Multipoint(Items on this page are rated for operation on three-phase systems and may be used on single-phase systems)ManufacturerCatalog NumberEaton 15 kV2-way, 3-way, 4-way bushingsSeries LJ215C---B (with bracket)Series LJ215C---U (with U-Straps)Series LJ215C--- (junction only)25 kV2-way, 3-way, 4-way bushingsSeries LJ225C---B (with bracket)Series LJ225C---U (with U-Straps)Series LJ225C--- (junction only)Elastimold (ESNA)15 kV 2-way bushing, 163J2 3-way bushing, 163J3 4-way bushing, 163J425 kV 2-way bushing, 271J2 3-way bushing, 271J3 4-way bushing, 271J435 kV 2-way bushing, 373J2 3-way bushing, 373J3 4-way bushing, 373J4G&W Electric15kVJB xxx 15UJB xxx 15P, with parking stands25kVJB xxx 25UJB xxx 25P, with parking stands35kVJB xxx 35UJB xxx 35P, with parking standsHubbell Power Systems15 kV 2-way bushing 215J2X 3-way bushing 215J3X 4-way bushing 215J4X25 kV 2-way bushing 228J2X 3-way bushing 228J3X 4-way bushing 228J4XU hq-2September 2015U hq - Terminations, Feed-Through and Parking BushingsManufacturerCatalog NumberEaton15 kVGrounded Standoff Bushing, GSB215Horizontal Portable Feed-through, LPF215HVertical Portable Feed-through, LPF215VUniversal Portable Feed-through, LPF215U25 kVGrounded Standoff Bushing, GSB225Horizontal Portable Feed-through, LPF225HVertical Portable Feed-through, LPF225VUniversal Portable Feed-through, LPF225UElastimold (ESNA)35 kVFeed-thru, 373FTParking Bushing, 371SOPHubbell15 kV215FT feed-thru215SB standoff bushing25 kV 228FT feed-thru228SB standoff bushing228GB grounded bushingU hq-3December 2013U hq - Terminations, Multipoint600 Ampere Continuous Current RatingManufacturerCatalog NumberEaton15 kV, 25 kVCleer load break connector assemblySeries LCN2DLJ615A, LCN2DLJ625A25 kV2-way, 3-way, and 4-way bushingsSeries DJ625A_ (with mounting bracket)Series DJ625A_B_ (without mounting bracket)35 kV2-way, 3-way, 4-way bushingsSeries DJ635---B (with bracket)Series DJ635---U (with U-Straps)Series DJ635--- (junction only)Elastimold (ESNA)15 kV2-way bushing, 650J2 or 675J23-way bushing, 650J3 or 675J34-way bushing, 650J4 or 675J425 kV2-way bushing, K650J2 or K675J23-way bushing, K650J3 or K675J34-way bushing, K650J4 or K675J4U hr-1March 2013U hr - Secondary tap or splice cover, submersibleManufacturerType or Catalog No.BlackburnType WDBS (#2 through #4/0), Type DBS (250 kcmil through 1000 kcmil)Connector Mfg. Co.Utilug Sure SealDSG-CanusaCSS Cold Shrink Splice KitsElastimold (ESNA)Style 86ESPTSC SeriesHomacFSS SeriesJoslynShrinktite JCLS SeriesKearney/EatonAqua-Seal KitPreformedHT SeriesPlymouth/BishopSplice-WrapTE Connectivity - EnergyRayvolve RVS Series3MPST Series 8420Heat Shrink Tubing (with sealant throughout)ManufacturerType or Catalog No.TE Connectivity - EnergyBlack heat-shrink tubingWCSM cable sleevesCANUSA-EMICFWESPHSHPanduitHeat shrink insulating cover and tubingSigmaform CorporationSigmaform heat-shrinkable products3MITCSN tubular cable sleeveU hv-1February 2020U hv - Cable, Underground15 kV, 25 kV, 35 kV CableApplicable Specification:7 CFR Part 1728.204Conductor (15 kV):Copper or Aluminum - #2 AWG through 1000 kcmilConductor (25 kV):Copper or Aluminum - #1 AWG through 1000 kcmilConductor (35 kV):Copper or Aluminum – 1/0 through 1000 kcmilInsulation:Tree-retardant Crosslinked Polyethylene (XLP-TR)(1) indicates Union Carbide 4202 XLP-TR(2) indicates BP H119Y XLP-TR(3) indicates BP H118Y XLP-TR(4) indicates LG XL8080 TREthylene Propylene Rubber (EPR)(E) indicates EPRNeutral:Copper Concentric NeutralJacket:High Molecular Weight PolyethyleneManufacturerInsulation(s)Flat StrapNeutralAvailableConductores Monterrey, S.A. de C.V.1, ENoCondumex 1, ENoGeneral Cable1, 3, EYesGaon Cable Co., Ltd.4, ENoMarmon Utility LLC (Hendrix)1, 2, 3, ENoMarmon Utility LLC (Kerite)EYesNexans Canada1, ENoNexans ItaliaENoOkonite1, EYesU hv-1.1February 2020U hv - Cable, Underground15 kV, 25 kV, 35 kV CableApplicable Specification:7 CFR Part 1728.204Conductor (15 kV):Copper or Aluminum - #2 AWG through 1000 kcmilConductor (25 kV):Copper or Aluminum - #1 AWG through 1000 kcmilConductor (35 kV):Copper or Aluminum – 1/0 through 1000 kcmilInsulation:Tree-retardant Crosslinked Polyethylene (XLP-TR)(1) indicates Union Carbide 4202 XLP-TR(2) indicates BP H119Y XLP-TR(3) indicates BP H118Y XLP-TR(4) indicates LG XL8080 TREthylene Propylene Rubber (EPR)(E) inidicates EPRNeutral:Copper Concentric NeutralJacket:High Molecular Weight PolyethyleneManufacturerInsulation(s)Flat StrapNeutralAvailablePhelps Dodge1, 3, EYesPrysmian1, EYesRome1, EYesSouthwire1, EYesSynergy Cables1, ENoU hv-2February 2020U hv - Cable, Underground600 Volt CableApplicable Specification: RUS Specification U-2Conductor: Copper, #4 AWG and larger; Aluminum, #2 AWG and largerInsulation: Cross-Linked polyethylene (XLPE)ManufacturerType ConductorAlcanAluminumCentelsaAluminumConductorres Monterrey, S.A. de C.V.Copper or AluminumCondumexCopper or AluminumEncore Wire Corporation AluminumEssexCopperGeneral CableCopper or AluminumNexans CanadaAluminumOkoniteCopper or AluminumPhelps DodgeCopper or AluminumPrysmianCopper or AluminumRome CableCopper or AluminumService Wire CompanyCopperSouthwireCopper or AluminumNOTE: The manufacturers shown above have indicated that their 600 volt cable is suitable for use on 480 volt corner grounded delta circuits.The above cable may be supplied with UL label for Type USE.U hv-3June 2015U hv - Cable, Underground600 Volt Multi-Conductor CableApplicable Specification: RUS Specification U-2Conductor: Copper, #4 AWG and larger; Aluminum, #2 AWG and largerInsulation: Cross-Linked polyethylene (XLPE)Cable Configuration: 3 Insulated Conductors TriplexedManufacturerType ConductorAlcanAluminumConductores Monterrey, S.A. de C.V.Copper or AluminumCondumexCopper or AluminumEncore Wire Corporation AluminumGeneral CableCopper or AluminumNexans CanadaAluminumOkoniteCopper or AluminumPhelps DodgeCopper or AluminumPrysmianCopper or AluminumRome CableCopper or AluminumSouthwireCopper or AluminumThe above cable may be supplied with UL label for Type USE.Technical ListU hv-4July 26, 2022U hv - Cable, Underground600 Volt Cable(Alternative Cable Constructions)Applicable Specification: RUS Specification U-2 (except as indicated below)NOTE: Manufacturers listed below are accepted for alternatives A, B, C, D and/or E for the products listed on pages U hv-2 and U hv-3.Alternative A: 8000 series aluminum alloy in accordance with ASTM B800 or B801.Alternative B: Stranding in accordance with ASTM B786 for aluminum 1350 conductors or ASTM B787 for copper conductors.Alternative C: Abuse resistant (ruggedized) (single or two layer) insulation in accordance with ICEA S-81-570.Alternative D: Self-healingAlternative E: Stranding in accordance with ASTM B 901 for Compressed Round Stranded Aluminum Conductors Using Single Input Wire ConstructionManufacturerAlternativeConditional ListU hv(1)August 19, 2022U hv - Cable, Underground15 kV, 25 kV and 35 kV Cable(Alternative Insulation Compound)Applicable Specification:7 CFR Part 1728.204Conductor (15 kV):Copper or Aluminum - #2 AWG through 1000 kcmilConductor (25 kV):Copper or Aluminum - #1 AWG through 1000 kcmilConductor (35 kV):Copper or Aluminum – 1/0 through 1000 kcmilAlternative Insulation Compound:Tree-retardant Crosslinked Polyethylene (TR-XLPE)(I) indicates Pirelli IE.7100 XLP-TR(II) indicates AT Plastic PowerGuard 320TR(III) indicates Union Carbide HFDB-4202(IV) indicates Nova Borealis LE 4212(V) indicates Dow HFDB 8202(VI) indicates Dow Endurance? HFDC 4202 EC(VII) indicates LG XL 8080TR(VIII) indicates Hanwha Wire and Cable Compound CLNA TR-8142ECEthylene Propylene Rubber (EPR)(E) indicates EPR(EAM) indicates General Cable EI-4000-LFNeutral:Copper Concentric NeutralJacket:High Molecular Weight PolyethyleneConditions:To obtain experienceManufacturerInsulation(s)Flat Strap Neutral AvailableGeneral Cable Industries, Inc.II, III, IV, V, VI, VII, EAMYesMarmon Utility LLC (Hendrix)III, IVNoNexans CanadaII, III, IVNoPhelps DodgeII, III, IV, VYesPrysmianI, IVYesSouthwireIII, IV, VIYesLS Cable & System U.S.A., Inc.IV, VI, VII, VIII, ENoConditional ListU hv(2)June 2015U hv - Cable, Underground600 Volt Cable(Alternative Cable Construction)Applicable Specification: RUS Specification U-2 (except as indicated below)NOTE: Manufacturers listed below are conditionally accepted for alternatives A, B, C, D and/or E for the products listed on pages U hv-2 and U hv-3.Alternative A: 8000 series aluminum alloy in accordance with ASTM B800 or B801.Alternative B: Stranding in accordance with ASTM B786 for aluminum 1350 conductors or ASTM B787 for copper conductors.Alternative C: Abuse resistant (ruggedized) (single or two layer) insulation in accordance with ICEA S-81-570.Alternative D: Self-healingAlternative E: Stranding in accordance with ASTM B 901 for Compressed Round Stranded Aluminum Conductors Using Single Input Wire ConstructionCondition: To obtain experience.ManufacturerAlternativeAlcanA, C, EConductores Monterrey, S.A. de C.V.CEncore Wire Corporation A, CGeneral CableA, CPhelps DodgeA, CPrysmianA, C, DNexansCSouthwireA, B, C, D, EU hw-1July 2009U hw - Safety signsApplicable Specifications: RUS Drawings ANSI Z535ManufacturerSize (inches)Danger SignCatalog No.Warning SignCatalog No.Caution SignCatalog No. Almetek 7 x 10Trident D-100-0710Trident W-100-071010 x 14Trident D-100-1014Trident W-100-101414 x 20Trident D-100-1420Trident W-100-1420Brady* 7 x 10461334604310 x 144613146041Eastern Metal* 7 x 10REA 12-1-710REA 12-2-71010 x 14REA 12-1-1014REA 12-2 101414 x 20REA 12-1-1420REA 12-2-142020 x 28REA 12-1-2028REA 12-2-2028Electromark* 7 x 10REA-1-7x10-SVREA-2-7x10-SV 7 x 10REA-1-7x10-ACREA-2-7x10-AC10 x 14REA-1-10x14-SVREA-2-10x14-SV10 x 14REA-1-10x14-ACREA-2-10x14-AC14 x 20REA-1-14x20-SVREA-2-14x20-SV14 x 20REA-1-14x20-ACREA-2-14x20-AC20 x 28REA-1-20x28-SVREA-2-20x28-SV20 x 28REA-1-20x28-ACREA-2-20x28-ACLem 7 x 10LSS-1400LSS-150010 x 14LSS-1401LSS-150114 x 20LSS-1402LSS-1502Lyle* 7 x 10UM12-1-710UM12-2-71010 x 14UM12-1-1014UM12-2-101414 x 20UM12-1-1420UM12-2-142020 x 28UM12-1-2028UM12-2-2028May Advertising 7 x 10MY710CMY710B10 x 14MY1014CMY1014B14 x 20MY1420CMY1420B20 x 28MY2028CMY2028BFor pressure sensitive decal add "D" prefixTruck Sign Service* 7 x 10TSD-710TSC-71010 x 14TSD-1014TSC-101414 x 20TSD-1420TSC-142020 x 28TSD-2028TSC-2028*Reflective signs also available.The signs listed on this page are to be secured to equipment and transformer enclosures by means of an adhesive or by welding. Screws and rivets are not to be used.U hx-1July 2009U hx - Cable Route MarkerManufacturer Catalog NumberSurface MountedHubbell (Chance)C554-0001Above GradeCarsoniteREA-100ElectromarkREA-3-4x7-SVREA-3-4x7-ACREA-3-5x12-SVREA-3-5x12-ACFlexstake603, 604, 605, 606GreenlineFLU-78 (Decal on one side)DSU-78 (Decal on both sides)Hubbell (Chance)C554-0183J Miller IndustriesJMI-375LyleUM12-712May AdvertisingMY45A, MY712A(For pressure sensitive decal add "D" prefix to catalog number.)QuantumQM-375Truck Sign ServiceBCW-712W. H. BradyBL1 (Decal on one side)BL2 (Decal on both sides)U hy-1June 2015U hy - Splice, Underground, Permanent(when ordering, specify conductor size, type, whether copper or aluminum and insulation diameter)ManufacturerCatalog NumberEaton15 kV and 25 kVEZ II straight and transition splice#3 through 4/035 kV2603934B Series straight spliceElastimold (ESNA)15 kvStyle 1500S, straight splice, through #1/0Style 25-S, straight splice, 2/0 through 4/0Style l5PCJ-1, straight splice, through 4/0Style 25-Y, Y-splice25 kVStyle K-25-S, straight spliceStyle K-25-Y, Y-spliceStyle 25PCJ-1, straight splice, through 4/035 kVStyle M-250-S, straight spliceDSG-Canusa15 kVCJ 10 Series, heat shrinkable joints25 kVCJ 10 Series, heat shrinkable joints35kVCJ 10 Series, heat shrinkable jointsHubbell (Chardon)15 kVStraight Splice through #1/0, Model 9U16A-100"Uni-Matic" Through #2/0, Model 9U06A25 kV"Uni-Matic" Through #2/0, Model 9U06APrysmian15 kV and 25 kV“Elaspeed” style EPJMestraight splice, #2 through 1000 kcmil3M(15, 25, 35 kV)5400 SeriesQuick Splice/Quick Splice II/Quick Splice III, 15 kV5411R cable repair splice5411R/HSJ-l cable repair splice (for jacketed cable)U hy-1.1May 2019U hy - Splice, Underground, Permanent(When ordering specify conductor size, type, whether copper or aluminum and insulation diameter)ManufacturerCatalog NumberTE Connectivity - Energy15 kVCSJU-1511CSJU-S-1511CSJA-1521CSJA-1522CSJA-1523CSJA-1524 HVS 1510-R 200 Amp Splice kit CAS-15WJ-2, cold-applied splice25 kVCSJU-2511CSJU-S-2511CSJA-2822CSJA-2823CSJA-2824 For Bare Concentric Neutral Cable: HVS-2510-REAX in-line joint HVS-2510E-R-REAX repair joint For Jacketed Cable: HVS-2510-JCN-REAX in-line joint HVS-2510E-RJ-REAX repair joint CAS-28WJ-2, cold-applied splice35 kVCSJA-3523CSJA-3524CSJA-3525 For Bare Concentric Neutral Cable: HVS-3510E-REAX in-line joint For Jacketed Cable: HVS-3510E-JCN-REAX in-line joint CAS-35M, cold-applied in-line spliceSigmaform15 kVSSK Series (Heat Shrink)U hy-2July 2009U hy - Splice, Underground, Separable(When ordering specify conductor size, type, whethercopper or aluminum and insulation diameter)ManufacturerCatalog NumberElastimold (ESNA)15 kV Style 151-SR, receptacle Style 151-SP, plug Style 150-DP, deadend plug Style 150-DR, deadend receptacle Sty1e l50-T, T-tap25 kV Style K-151-SR, receptacle Style K-151-SP, plug Style K-150-DR, deadend receptacle Style K-150-T, T-tapU hy-3July 2009U hy - Splice, Underground, Permanent(When ordering specify conductor size, type, whethercopper or aluminum and insulation diameter)600 Ampere Continuous Current RatingManufacturerCatalog NumberEaton15 kV 2604904B Series straight splice (MPS-600)25 kV 2604905B Series straight splice (MPS-600)Elastimold (ESNA)15 kV Style 650-S, straight splice Style 15PCJ-2, straight splice, through 1250 kcmil Style 650-Y, Y-Splice25 kV Style K650-S, straight splice Style K650-Y, Y-splice Style 25 PCJ-2, straight splice, through 1250 kcmil35 kV Style M650S, straight spliceU ja-1October 2014U ja – Equipment Flat Pad*ManufacturerCatalog NumberArmorcast600 Series, Polymer ConcreteP600XXXX Rotocast, LLDPEAssociated PlasticsAPI 4000 Series RPMCarolina DielectricsModel 0502-1, Fiberglass, Size:40”x44”CDR Systems (Homac)PP Series, Fiber reinforced polymer concreteDiversitechFRC Series – Fiberglass reinforced concreteElectri-GlassFiberglass LP-4145, 41" x 45"Electrical MaterialsMolded HMW PolyethyleneModel 64-3BC, 42" x 41" x 4"Model 65-4BC, 52" x46"ElectrimoldEPPTHighline ProductsPBP Series, Polymer concrete hybridHL-46B, Fiberglass, Size: approx. 42” X 42”FormexMode1 TP-REA, Molded polyethyleneHeil Rotomold, Inc.T Series, High density polyethyleneHighlineHL-46B, Fiberglass, Size: approx.42"x42"Hubbell (Chance)C107-0162 Fiberglass, Size: 40" x 44"Major Frame-CreteETPP precast, cellular concrete, 42"x42"NewbasisPolymer pad – PP1P-4242NordicTP Series, FiberglassParking Bumper Company – a Division of Hog Slat, Inc.7610, 7612, 7613, 7626PE, 7621PenCell PlasticsTP-4220, TP-4224, TP-4227Quality Rubber Company34242 light-weight concreteQuazite posolite - PH SeriesRMI-DDwg. No. 730126-2, Molded polyethyleneSize: 42" x 42"Smith CattleguardEasi Set T. Series, Precast Reinforced ConcreteThermodynamicsPoly-Pad, PR Series, Molded polyethyleneYEPR031220, YEPR031226, compression molded polypropylene*Order by catalog number and size. U ja-2December 2019U ja – Equipment Box Pad (Sleeve)*ManufacturerCatalog NumberAcura Fiberglass Corp.Model AG 4532Associated PlasticsTransformer pad and box assembly, API 4242 RPM Pad and 1730 Box Transformer Pads, API 16 and API 45Blue Grass Vault CompanyBG-PV-T, BG-PV-1, BG-PV-2ConcastFibercrete modular basesCustom CompositesR Series FiberglassDiversiTechFRC Series – Fiberglass reinforced concreteD & LFiberglassElectri-Glass, Inc.BP-2000ElectrimoldEFBT,EFBS,EFBG SeriesFiberglas FabricatorsTransformer pad and sleeve assembly, FFBP seriesFormexTransformer pad and box assembly - TP-REA Series Pad, 1730-A Series BoxHighlineBox pad HL, FBP, FSG, AND FGS SeriesAmerican Padmount Systems FGS Series Fiberglass ground sleeves and box padsMaysteelCW-GS-P SeriesMor-Tech FabTransformer pad ground sleevesNordicGS Series Fiberglass (excluding GS-37-43-15-A) CBP-37-43-15-APenCellTransformer pad and box assembly- TPS-20-PE Pad,PE-20GS BoxProGlass, Inc.TX, SR, S, and SG Series (All without optional lids)Quality FiberglassQF SeriesSynertech Moulded ProductsS1212, S1118, S1324, S1730, S2436, S3048 and S3660ThermodynamicsPoly Pad - VC series (VCC-P series covers available) Polyethylene*Order by catalog number and size.U jb-1July 2009U jb - Splice ShieldManufacturerCatalog NumberKellemsNo. 014-03-1429Conditional ListU sc(1)July 2009U sc - Regulators, voltage, pad-mountedfor underground distribution12.5/7.2 kVManufacturerConditionsSiemens-AllisSingle-phase, step-type pad-mounted regulator Type PFR (76.2, 114.3 & 167 kVA)To obtain experience.U sd-1July 2009U sd - Current Transformers600 VoltDirect Burial TypeManufacturerType or Catalog No.General ElectricJAL-OIndoor Type for Pad-Mounted TransformersManufacturerType or Catalog No.ABBCMVG.E.C. Durham Industries (Astra)APGeneral ElectricJAB-OSchlumbergerR6PU si-1May 2014U si - Anodes, Sacrificial(Drawing M27)Zinc Anodes*Pre-packaged With Connecting WireBare Continuous Strip (Ribbon)12 lbs.30 lbs.60 lbs.5/8" x 7/8"1/2" x 9/16"Anode SystemsS-12packagedS-30packagedS-60packaged--CathodicProtectionServices12HII-4A30HII-4A60HII-4AFederatedMetalsS-12packagedS-30packagedS-60packagedRegular SizeType IIJunior sizeHarcoAZC12GJAZC30GJAZC60HJMesaS-12packagedS-30packagedS-60packagedRegular SizeJunior sizeStuartSZ-12SZ-30SZ-60-----VIBROX packaged-----*When ordering, specify zinc anodes that meet ASTM B418-73 Type II Composition and RUS Specification DT-9, "RUS Specification for Zinc Sacrificial Anodes."U si-2May 2014U si - Anodes, Sacrificial(Drawings UM11-1, UM26, UM27, M2-7, M2-17)Magnesium Anodes**Standard PotentialHigh Potential17 lbs20 lbs32 lbs50 lbs17 lbs20 lbs32 lbs48 lbsAnode Systems17packaged-32packaged50packaged17packaged20packaged32packaged84packagedCathodic Protection ServicesAMH17A packaged-AMH32A packagedAMH50A packaged17D3 packaged20D2 packaged32D5 packaged48D5 packagedFederated Metals17 packaged-32 packaged50 packaged----Global Cathodic Protection----17D220D232D348D5HarcoAMC17JAMC20JAMC32JAMC50JAMC17GAMC20GAMC32GAMC48GKaiser Mag.17 Vibra Pak-32 Vibra Pak50 Vibra Pak17 Electromag Vibra Pak-32 Electromag Vibra Pak50 Electromag Vibra PakMesa17 packaged-32 packaged50 packaged17D Series20D232D Series48D5StuartSM-17-SM-32SM-50SM-17H-SM-32HSM-48H**When ordering, specify magnesium anodes that meet RUS Specification DT-10, "RUS Specification for Magnesium Sacrificial Anodes." ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- command screening checklist
- ip 202 1 list of materials usda rural development
- gastroenteritis at a university in texas
- prohibited items items that often require pre purchase
- english 101 composition rhetoric
- department of the army
- a guide to prescribing administering and dispensing
- description of ems materials
Related searches
- list of human development theories
- list of professional development goals
- list of key development needs
- list of development opportunities
- list of cognitive development skills
- usda rural development forms download
- rural development forms and instructions
- usda rural development forms fillable
- usda rural mortgage insurance
- usda rural development application forms
- usda rural development fillable forms
- usda rural development home loan application