Storage Tank System Equipment Registration List



August 7, 2020FLORIDA DEPARTMENT OF ENVIRONMENTAL PROTECTIONAPPROVED/REGISTERED STORAGE TANK SYSTEM EQUIPMENT LISTRules 62-761.850(2), and 62-762.851(2), Florida Administrative CodeThe following is a list of manufacturers of approved/registered storage tank system equipment. The list contains equipment that has been approved after December 10, 1990, and does not include equipment approved under Chapter 17-61, Florida Administrative Code (F.A.C.). Effective January 11, 2017, new or updated equipment will be registered with a five-year renewal requirement. Equipment approved prior to January 11, 2017, must be renewed by January 10, 2022, to remain on the list. See subsections 62-761.850(2) and 62-762.851(2), F.A.C., for requirements. The Florida Department of Environmental Protection does not specifically endorse any manufacturer nor is the Department responsible for any failure or malfunction of the product or equipment. It is the responsibility of the tank owner to verify that materials of storage tank systems and their components are compatible with the regulated substance stored in the tank system. All installed storage tank system equipment containing blends of ethanol, biodiesel, or other biofuels and additives shall be compatible with the regulated substances stored in the storage tank systems. Contact information on the list is updated by the manufacturer and may not be current. For technical inquiries regarding equipment, please contact Elena Compton via email at pton@ or call 850-245-8911.For additions, corrections, or questions about this list, please contact Kim Curran via email at Kimberley.Curran@ or call 850-245-8849. CATEGORIES TOC \o "1-1" \h \z \u Tanks/ UST with Secondary Containment PAGEREF _Toc347150 \h 4Tanks/ UST with Internal Secondary Containment Upgrade PAGEREF _Toc347151 \h 8Tanks/ UST System – Total systems PAGEREF _Toc347152 \h 12Tanks/ UST Secondary Containment Systems Only PAGEREF _Toc347153 \h 13Tanks/ AST with Enclosed Secondary Containment PAGEREF _Toc347154 \h 14Tanks/ AST Secondary Containment Only PAGEREF _Toc347155 \h 20Tanks/ AST with Secondary Containment Requiring Additional Equipment PAGEREF _Toc347156 \h 21Tanks/ AST Vault System PAGEREF _Toc347157 \h 43Tanks/ AST with Secondary Containment and Spill Containment PAGEREF _Toc347158 \h 43Tanks AST Single-Wall Only PAGEREF _Toc347159 \h 55Tanks/ AST Field Erected AST with Release Prevention Barriers PAGEREF _Toc347160 \h 62Piping PAGEREF _Toc347161 \h 63Piping Over Water PAGEREF _Toc347162 \h 67Bulk Product Piping with Secondary Containment PAGEREF _Toc347163 \h 72Coatings (Liners) AST/UST Synthetic or Concrete PAGEREF _Toc347164 \h 72 HYPERLINK \l "_Toc347165" Leak Detection Equipment – Sensors, Alarms and Control Panels PAGEREF _Toc347165 \h 89Leak Detection/ Vapor Detector PAGEREF _Toc347166 \h 89Leak Detection/ Liquid Detector PAGEREF _Toc347167 \h 90Leak Detection/ Automatic Tank Gauging PAGEREF _Toc347168 \h 103Leak Detection/ Continuous Automatic Tank Gauging PAGEREF _Toc347169 \h 108Leak Detection/ Statistical Inventory Reconciliation (SIR) PAGEREF _Toc347170 \h 112Leak Detection/ Line Leak Detector with Automatic Shut-off PAGEREF _Toc347171 \h 116Leak Detector/ Mechanical Line Leak Detector with Flow Restrictor PAGEREF _Toc347172 \h 118Leak Detection/ Single Wall UST and AST System PAGEREF _Toc347173 \h 119Leak Detection/ Breach of Integrity PAGEREF _Toc347174 \h 121 HYPERLINK \l "_Toc347175" UST/ Tank and Line Tightness Tester Manufacturers PAGEREF _Toc347175 \h 124AST/ Tank Testers, API 653 Inspection PAGEREF _Toc347176 \h 134Piping Testers/ Bulk Product Piping Testing; API 1110 Testing or Equivalent PAGEREF _Toc347177 \h 136UST/ Spill Containment Devices PAGEREF _Toc347178 \h 138UST/ Overfill Protection (Vent Restrictors such as ball float valves cannot be installed after January 11, 2017) PAGEREF _Toc347179 \h 144AST/ Spill Containment Devices PAGEREF _Toc347180 \h 150AST/ Overfill Protection PAGEREF _Toc347181 \h 156Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair PAGEREF _Toc347182 \h 171Sump Liners/ Installed as a part of Integral Piping, Upgrade, or Repair PAGEREF _Toc347183 \h 179Hydrant Pits PAGEREF _Toc347184 \h 185Miscellaneous PAGEREF _Toc347185 \h 186Tanks/ UST with Secondary ContainmentFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-129 (see EQ-927)Southeast Tank Co.David Palazzo813-986-10435/10/1993PermaTankConditional ApprovalEQ-154Gold Coast Coating, IncDerick Sharp606-654-82651/04/1994GCR-100Conditional ApprovalEQ-156Modern Welding Co.Gene Schober407-843-12703/15/1994Glassteel IIEQ-162Specialty Tank & EquipmentWilliam Mann800-228-10393/23/1994Sti-p3 and GlasscoteSTI licenses manufacturers of STI storage tanks – Contact STI for approved licenseesEQ-166Total Containment, Inc.Tony Adamson610-666-21703/18/1994Underground Double Walled Tank Jacket Storage TankEQ-169Mepco, Inc.Steve Holmes800-880-58785/27/1994AMUST SystemThe Final Order was rescinded On October 5, 2001EQ-191Containment Solutions, Inc.Kevin Soeder936-756-77312/17/1995Owens-Corning Double Wall TanksBTU Coating for Biofuel StorageEQ-200Xerxes CorporationGene Pope813-969-19005/12/1995Xerxes Double Wall TanksEQ-236KCL Products Ltd.Dr. Kaempen714-978-97082/05/1996Kaempen Double Wall TanksEQ-275Containment solutions, Inc. (Formerly Beta Tank, Inc.)Kevin Soeder936-756-77312/07/1997Sti-p3 and Act-100 double Wall storage tanksEQ-277Alabama Tank, Inc.Kevin Woods251-577-64153/14/1997Sti-p3 Double-Wall Underground Storage tankEQ-289Alabama Tank, Inc.Kevin Woods251-577-64158/04/1997Double-Wall Fiberglass Coated SteelEQ-317Titan Tank Company of Florida, Inc.David Palazzo813-986-79962/16/1998Titan Double-Wall Underground TankEQ-333Metal Products CompanyBurcher Gammage800-424-73739/08/1998Type I, and Type II, and Elutron tankEQ-339Newberry Tanks & Equipment LLCBrian Brinkley800-643-939510/08/1998Double-Wall Underground Tank Type 1 & 2, Sti-P3, and Type 1 & 2 Act 100STI licenses manufacturers of STI storage tanks – Contact STI for approved licensees[Back to Categories]Tanks/ UST with Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-339Newberry Tanks & Equipment LLCBrian Brinkley800-643-939510/08/1998Double-Wall Underground Tank Type 1 & 2, Sti-P3, and Type 1 & 2 Act 100STI licenses manufacturers of STI storage tanks – Contact STI for approved licenseesEQ-341ZCL-USA, Inc.Ron Koch604-209-145711/02/1998Prezerver Double-Wall USTEQ-491 (see EQ-927)Steel Tank Institute STI/SPFA (Licensed Mfr – Service Welding & Machine Co., Inc.)Joseph Mentzer847-438-82655/10/2001 Revised 2/25/2020PERMATANK? double-wall jacketed UST (formerly Service Welding & Machine Co., Inc.’s manufacturing the Titan, PERMATANK?, ACT-100, and STI-P3)STI licenses manufacturers of STI storage tanks – Contact STI for approved licenseesEQ-495Xerxes CorporationGene Pope813-969-19004/18/2001Xerxes triple wall USTAn initial tightness test during installation is performed in accordance with Exhibit A or Exhibit B. A record of the test shall be kept in accordance with Rule 62-761.710, F.A.C.EQ-506Highland Tank Mfg., Co.Scott Matarazzi717-664-060010/05/2001Highland Tank Manufacturing Company’s manufacturing of the Titan underground storage tankConditional ApprovalEQ-507 (See EQ-583)Steel Tank InstituteDana Schmidt847-438-826510/08/2001ACT-100? and ACT-100U? double-wall underground storage tanksConditional ApprovalEQ-537Xerxes CorporationGene Pope813-969-19009/19/2002Xerxes Corporation “X” TankThe Xerxes Corporation “X“ Tank is approved as a method for providing secondary containment for single-walled Xerxes tanks.EQ-553 (now EQ-927)Steel Tank Institute STI/SPFA (licensed Mfr – General Industries, Inc.)Joseph Mentzer847-438-82651/30/2003Updated 2/25/2020PERMATANK? double-wall jacketed UST UL File Number MH16166Conditional Approval[Back to Categories]Tanks/ UST with Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-583Steel Tank Institute STI/SPFAJoseph Mentzer847-438-82654/14/2004Updated 4/14/2020ACT-100? and ACT-100U? Double-Walled USTs (STI licenses manufacturers – contact STI for current licensees) The installation, testing, and operation of the systems shall be made in accordance with the manufacturer’srecommendations.EQ-584Bertotto Boglione, S.A.Eduardo BorriArgentina 54-3472-4250954/15/2004Bertotto Boglione, S.A., manufacturing of the Plasteel Elutron Jacketed Fiberglass underground storage tank, UL File Numbers MH18314 and MH26494EQ-611Edwards Fiberglass, Inc.Brian Gately781-829-11885/06/2005Edwards Fiberglass Double-Wall tanks, UL File Number MH14359The system is tightness tested in accordance with Rule 62-761.500(2)(d), F.A.C., prior to being placed into service; equipped with only dry interstitial monitoring, and recorded in accordance with Rule 62-761.710, F.A.C, requirements specified in Exhibit A attached with this Final Order.EQ-626Plasteel International, Inc.Rick Sharp760-729-109312/10/2005Plasteel Composite? and Elutron? FRP jacketed Double-Walled USTs, UL File Number MH118314Conditional ApprovalEQ-674Highland Tank Mfg. Co.Todd Shearer717-664-06006/11/2007Double-Walled 360° USTs, UL File Number MH25373EQ-691Highland Tank Mfg. Co.Paul Balint814-893-5701 Ext. 11312/03/2007Highland Highguard UL 58/1746Double-Walled UST, UL File Number MH4242The system is tightness tested at installation in accordance with Exhibit A.[Back to Categories]Tanks/ UST with Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-694Modern Welding of Florida, Inc.Gene Schober407-843-127012/14/2007Modern Welding Double-Wall Tank GS-16, UL File Number MH3217The system is tightness tested in accordance with Exhibit A and Exhibit B, prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C, requirements in Exhibit A and Exhibit B attached with this Final Order.EQ-716Steel Tank Institute STI/SPFAJoseph Mentzer847-438-82659/26/2008Updated 9/19/2019STI-P3 double-wall underground storage tanksThe tank manufacturers are authorized to manufacture the STI-P3 double-wall underground storage tanks under the Steel Tank Institute are licensed for use in the State of Florida. EQ-733 (now EQ-927)Steel Tank Institute STI/SPFA (Licensed Mfr – Newberry Tanks & Equipment LLC)Joseph Mentzer847-438-82655/18/2009 Updated 2/25/2020PERMATANK? double-wall jacketed UST., UL File Number MH3704The system is tightness tested in accordance with Exhibit A and Exhibit B, prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C, requirements in Exhibit A attached with this Final Order.EQ-927Steel Tank Institute STI/SPFAJoseph Mentzer847-438-82652/25/2020PERMATANK? double-wall jacketed UST. UL File MH9301The installation, testing, and operation of the systems shall be made in accordance with the manufacturer’srecommendations.[Back to Categories]Tanks/ UST with Internal Secondary Containment UpgradeFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-087Derscot, Inc.Derick Sharp606-654-82658/21/1992DS-9000Conditional ApprovalEQ-112D.I. Chadbourne EnterprisesDan Chadbourne650-344-14283/10/1993PolyFlex SystemConditional ApprovalEQ-187Controls on Environmental Systems, Inc.John Lewis704-764-77451/31/1995C.O.E. Containment SystemConditional ApprovalEQ-264Bell Avon, Inc.David Poole601-799-12178/27/1996Vigilant systemConditional ApprovalEQ-306HT Technologies LLCDavid Dudding888-287-959512/11/1997PrimaGuard Secondary ContainmentConditional ApprovalEQ-403ZCL-USA, Inc.Lee Brownson803-210-937111/16/1999ZCL-USA’s Phoenix System?Conditional ApprovalEQ-403AAmendmentZCL Composites, Inc.Lee Brownson803-210-93719/12/2008ZCL-USA’s Phoenix System? Conditional ApprovalEQ-403A2Second AmendmentTank Tech, Inc.David Russell573-471-19327/31/2009ZCL-USA’s Phoenix System?a) The following condition e is added to the provisions of the original Order stating that the systems installed after November 16, 1999 shall be tightness tested in accordance with Exhibit A of this Order; and b) The conditions of original Order remain in effect.EQ-403A3Tank Tech, Inc.David Russell573-471-19324/13/2020PCS System (Phoenix System?) UL File MH61415Conditional Approval – see EQ-403A3EQ-454Containment Solutions, Inc.Kevin Soeder936-756-77319/29/2000Double-Wall Re-Tank? Underground Storage TankConditional Approval/BTU Coating for Biofuel StorageEQ-621UST Environmental Services, Inc.John Collins800-992-129312/14/2005In-Situ Double-walled SystemConditional ApprovalEQ-667ZCL Composites, Inc.Ron Koch604-209-14573/28/2007UL Listed Phoenix System, UL File Number MH45077Conditional Approval[Back to Categories]Tanks/ UST with Internal Secondary Containment Upgrade (continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-668K-Tank Systems, LLC (Formerly Petrofuse ZP LLC)Lissette & Ralph Calderon305-856-82834/16/2007Petrofuse Four-Coat Tank Lining System, with the Ashland Aropol corrosion resistant resin (UL certification number EGVV2.MH28980), the Correx Grade 3/450 interstitial membrane, and the Petrofuse Dual Contained Leak Monitoring System Model T3300 Series Leak detectorConditional ApprovalEQ-668 AmendmentK-Tank Systems, LLC (Formerly Petrofuse ZP LLC)Lissette & Ralph Calderon305-856-828311/22/2008Petrofuse Four-Coat Tank Lining SystemConditional ApprovalEQ-668 Second AmendmentK-Tank Systems, LLC (Formerly Petrofuse ZP LLC)Lissette & Ralph Calderon305-856-82837/28/2009Petrofuse Four-Coat Tank Lining System, with the Ashland Aropol corrosion resistant resin (UL certification number EGVV2.MH28980), the Nida-Core Hxx SBPP interstitial membrane, and the Petrofuse Dual Contained Leak Monitoring Systema) Allows the replacement of the Correx Grade 3/450 interstitial membrane with Nida-Core Hxx SBPP membrane; and b) The conditions of original Order remain in effect.EQ-729Tank Tech, Inc.David Russell573-471-19323/17/2009UL Listed Phoenix Hybrid System and Phoenix Epoxy System, UL file number MH46218Conditional Approval[Back to Categories]Tanks/ UST with Internal Secondary Containment Upgrade (continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-729 AmendmentTank Tech, Inc.David Russell573-471-19327/31/2009UL Listed Phoenix Hybrid System and Phoenix Epoxy System, UL file number MH46218a) The following condition f is added to the provisions of the original Order stating that the systems installed after March 17, 2009 shall be tightness tested in accordance with Exhibit A of this Order; and b) The conditions of original Order remain in effect.EQ-777PCE Petroleum Contractors EnterpriseRaul (Nick) Necoechea407-342-13858/19/2011PCE Double-Walled Containment System for Lined TanksThe preparation of the interior of the single-walled underground storage tank shall be made to provide a strong bond between the tank outer wall and the secondary containment system. A communication test shall be performed and passed before the tank is placed into operation to assure proper release detection is taking place. Any Cathodic protection system employed on the single-walled storage tanks shall be continued to be operated and maintained according to the rule.EQ-781(see amendment EQ-781A)Tank Tech, Inc.Dave Russell573-471-19323/08/2012Tank Tech, Inc. Stand Alone System UL listed as Internal Stand-Alone Tank System (ISATS)See amendment EQ-781A Approved as a fiberglass double-walled UST installed within a fiberglass or steel UST. Installation and initial integrity testing must be performed by companies and personnel that have been approved, trained and certified by Tank Tech, Inc. according to the test procedures and quality assurance protocols provided by Tank Tech, Inc.[Back to Categories]Tanks/ UST with Internal Secondary Containment Upgrade (continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-781ATank Tech, Inc.Dave Russell573-471-19324/02/2020Internal Stand-Alone Tank System (ISATS), also known as Stand-Alone Self Structural (SASS)This Amendment includes improvements to ISATS involving the installation of approved materials and coatings (EQ-880), the revision of the manufacturer’s instructions for integrity testing and extending the testing frequency from two years to five years and only Tank-Tech approved personnel can install, repair, and test the ISATSs in accordance with manufacturer specifications, UL 1856, and EQ-760. EQ-880Tank Tech, Inc.Jonathon McNeely888-405-23697/24/2017Tank Tech, Inc., UL 1856 FRP Lining SystemInstaller must be a Tank Tech, Inc. approved technician, and if the Braddock Method is used for testing, a Tank Tech Technician must be used, and the interstitial integrity test must be performed in accordance with manufacturer’s instructions.EQ-939Poly Lining SystemsTony RieckGreg Eaton719-359-8467508-878-60416/22/2020Genesis Secondary Containment Tank System – Rigid wall retrofit secondary containment systems for USTsConditional Approval. Only Poly Lining Systems trained applicators are permitted to install the Genesis Secondary Containment System. See Attachment A, Page 17 of EQ-939 for Sensor Requirements.Tanks/ UST System – Total systems File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-076Euro Tank & Ecosafe System, Inc.Manfred Fiech352-629-37006/29/1992Euro TankThese systems are equipped with spill containment overfill protection, release detection, MPDs, and canopy.EQ-258Petro-FirstArt Sabatinelli954-971-95985/09/1996Petro-First Facility Equipment Storage Tank SystemThese systems are equipped with spill containment overfill protection, release detection, MPDs, and canopy.EQ-276EuroTank & Ecosafe Systems, Inc.Manfred Fiech352-629-37003/27/1997Euro-Tank?& Ecosafe System IIThese systems are equipped with spill containment overfill protection, release detection, MPDs, and canopy.EQ-587UST Environmental Services, Inc.John Collins800-992-12936/02/2004Ameri-SystemThese systems are equipped with spill containment overfill protection, release detection, MPDs, and canopy. The system components, tank, overfill protection, and spill containment are Department approved and the integral steel piping is designed and installed in accordance with Chapter 62-761, F.A.C. requirements.[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-015Fiberstone N.C., Inc.D. Sudrakin704-891-74745/05/1991FiberstoneEQ-875Mass TankCarl Horstmann508-923-34455/26/2019Manufactured as Mass Tank, Myers Tank, The Tank Shop. STI Certified Member. ASTs and USTs double-walled and single-walled.Also approved under EQ-434 and EQ-531.Tanks/ UST Secondary Containment Systems Only[Back to Categories]Tanks/ AST with Enclosed Secondary Containment These Tanks are Equipped with Overfill Protection, Spill Containment, and Interstitial Release DetectionFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-002RECoVault, Inc.Bob Green800-879-39894/25/1991EcovaultThese tanks are Equipped with Overfill Protection, Spill Containment, and Interstitial Release Detection.EQ-009Tesco Resources, Inc.Hank Berberat203-758-32705/02/1991TescoEQ-010Davis Industries, Inc.D. Harriford813-355-29715/20/1991IT2EQ-013Phoenix Products, CompanyChristopher Morter904-366-22775/06/1991Enviro-VaultEQ-031PWH Equipment & Services Co., Inc.James Hudson813-621-20777/03/1991Duocon, and Duotank TanksSecondary containment shall be at min 90% coverage of primary tank. The System shall have an overfill shut off at a min 90% and have a spill containment. EQ-037Industrial Environmental SupplyJim Burns919-274-48178/20/1991Scat TanksEQ-042Petro-Tank Sales, Inc.Raulph Suarez800-528-67229/05/1991Centurion TanksEQ-047Brown Minneapolis TankBrian DiGrado612-454-675010/15/1991Sure-CheckEQ-053Hall Mark IndustriesShannon McMillian800-872-27701/14/1992Hall Mark Tank VaultsEQ-062Hausner, Inc.John Hausner800-533-95092/14/1992Hi-Tech VaultEQ-068The Boss Group, Inc.David Riggie 410-783-96334/16/1992Fuel PackEQ-082Ultra Tank CompanyDon Schurr800-330-88717/27/1992Ultra VaultEQ-116Clawson Tank CompanyBrian Shelton800-272-13673/10/1993Liqui Vault[Back to Categories]Tanks/ AST with Enclosed Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-124Containment Solutions, Inc. (Formerly Hoover Containment Systems, Inc.)Kevin Soeder936-756-77314/05/1993Safewaste & Fuel MasterEQ-125Liquid Management ProductJake Magish203-778-20184/05/1993Super-TankEQ-146PWH Equipment and Services Company, Inc.James Hudson813-623-687110/20/1993Master Tank & Master VaultEQ-153Trusco Tank, Inc.Ken Jakes805-544-91551/04/1994Super VaultEQ-155Containment Solutions, Inc. (Formerly Hoover Group, Inc.)Kevin Soeder936-756-77311/21/1994Tank-VaultEQ-158East Coast EngineeringDavid Kardish904-783-11422/04/1994Igloo TankEQ-173General Industries, Inc.Jamie Stanley919-751-17916/14/1994Trisafe Vault SystemsEQ-175Boss Petroleum Products, Inc.David Riggie800-759-99886/14/1994Boss Fire guardEQ-190The Gateway Group, Inc.Robert Becon602-244-86642/17/1995The Gateway Aboveground Storage SystemEQ-207Porta Tank Manufacturing, Inc.Bill Hudson813-633-30926/26/1995Porta Tank Model # 100EQ-208Garsite, Inc.Mark Kendrick913-342-56006/26/1995ITI Aboveground Storage Tank System[Back to Categories]Tanks/ AST with Enclosed Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s nameCondition(s)EQ-232Paul Moore Associates, Inc.Jeff Smith404-452-737711/22/1995Aero Power Type ISecondary containment shall be at min 90% coverage of primary tank. The System shall have an overfill shut off at a min 90% and have a spill containment.EQ-233Steca, Inc.Carol Latiolais804-436-000011/20/1995Generator Base Fuel TankEQ-235Southern Pre-Cast, Inc.Charles Davidson800-669-227812/07/1995StrongboxEQ-239Memco MFG, Inc.Bill Stamp407-656-56012/07/1996EnvirosafeSecondary containment shall be at min 90% coverage of primary tank. The System shall have an overfill shut off at a min 90% and have a spill containment.EQ-254Stor-Safe SystemsRonald Lieper407-589-58304/22/1996Stor-Safe Model #200EQ-255Dunn Industries/Tommy TankTom Morris800-253-82654/26/1996Tommy Tank Double Wall Steel Storage Tank SystemEQ-274Containment solutions, Inc. (Formerly Beta Tank, Inc.)Kevin Soeder936-756-77312/07/1997Fireguard Double Wall Storage Tank systemEQ-279Floyd ManufacturingJoseph Floyd 800-868-20184/22/1997Floyd AST OE279 Double Wall Aboveground Storage Tank SystemEQ-280Pritchard Brown of Florida, Inc. (Formerly Electric Specialty, Inc.)John Lundahl800-231-22584/22/1997Electric Specialty Sub-Base Aboveground Storage Tank SystemEQ-309Atlas Fuel & Liquid Storage TanksKelly Stanton 800-797-826512/15/1997Atlas Tank Aboveground Storage Tank System [Back to Categories]Tanks/ AST with Enclosed Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-314Porta Tank Manufacturing, Inc.Bill Hudson813-633-30922/04/1998Porta Tank Model # 200Secondary containment shall be at min 97% coverage of primary tank. The System shall have an overfill shut off at a min 95% and have a spill containment. This order supersedes EQ-58. EQ-315Phoenix Metal Products, Inc.Pierre Dionne540-334-21001/27/1998Phoenix Metal Products UL 142 Double-Wall Aboveground SystemEQ-336Alabama Tank, Inc.Kevin Woods251-577-64159/08/1998Fireguard and F921 Double-Wall Aboveground Storage TankEQ-338Newberry Tanks & Equipment LLCBrian Brinkley800-643-939510/08/1998Dual Wall Aboveground Storage Tank, the Fireguard Double-Wall Aboveground Tank, the F921 Double-Wall Aboveground TankEQ-338Newberry Tanks & Equipment LLCBrian Brinkley800-643-939510/08/1998UL 142 single-wall tanks with steel dikes that are equipped with a rain shieldUL 142 single-walled tanks with steel dikes that are equipped with a rain shield shall have secondary containment at a minimum of 90% of the primary tank. The system shall be equipped with overfill shut-off at a minimum of 90% of the primary tank capacity. The system shall be equipped with spill containment.[Back to Categories]Tanks/ AST with Enclosed Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-342Metal Products CompanyBurcher Gammage770-945-838311/02/1998Fireguard and UL-142 Double-Wall ASTEQ-3471st Fueling SystemTaylor Hall888-478-383512/01/1998UL 142 Double-Wall Tank with Pumping System for Aviation FuelEQ-352Modern Welding Company Florida, Inc.Gene Schober407-843-127011/22/1998UL 142 single-wall tanks with steel dikes that are equipped with a rain shield UL 142 Single-Walled tanks with steel dikes that are equipped with a rain shield shall have secondary containment at a minimum of 90% of the primary tank. The system shall be equipped with overfill shut-off at a minimum of 90% of the primary tank capacity. The system shall be equipped with spill containment. When storing High Viscosity Product as defined in the Rules, the tanks do not require secondary containment nor release detection.EQ-352Modern Welding Company Florida, Inc.Gene Schober407-843-127011/22/1998Double-Wall UL142 Aboveground Storage Tank, the Fireguard Double-Wall Aboveground TankEQ-371U-Fuel, Inc.Michael Webb715-836-09053/12/1999U-Fuel SystemEQ-375Altorfer PackagingKevin Nunn309-697-12346/04/1999UL-142 Double-Wall Altorfer Sub-Base Generator Tank SystemEQ-498Sigam Engineering Inc. (Formerly SuperSafe? Tanks, Inc.)Jacob Magish317-255-53875/23/2001SuperSafe? Aboveground Petroleum Storage and Dispensing SystemThe product is approved in the State of Florida as an aboveground storage tank and containment system equipped with spill containment, overfill protection, Warwick Controls Model 470/570 series interstitial release detection, and a dispensing system.[Back to Categories]Tanks/ AST with Enclosed Secondary Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-821Phoenix ProductsChristopher Morter904-354-18583/24/2014Phoenix Products USL-DW-WM-25 Secondary Containment Aboveground Storage TanksThe installation and integrity testing procedures for the AST system shall be made in accordance with the manufacturer’s recommendations.EQ-866Krampitz International CAChristopher Leigh+49(0)5851/9443-07/5/2016Krampitz International CA Minotaur?Petrol Station Systems and Krampitz Tank SystemsThe installation, testing, and operation of the systems shall be made in accordance with the manufacturer’srecommendations.EQ-894Pritchard Brown, LLCAlan Reed410-483-48755/4/2018Pritchard Brown UL-142 Aboveground Sub-Base Fuel Tank. UL File Number MH15232The installation, testing, and operation of the system shall be made in accordance with the manufacturer’srecommendations. The secondary containment cannot be pressurized for testing per manufacturer.EQ-903Patterson Pump CompanyMichael Ellers706-886-210110/8/2018Patterson Pump Company AST 650 Gallon Double-Walled Fuel Tank for Diesel Driven Fire PumpsThe installation, testing, and operation of the systems shall be made in accordance with the manufacturer’srecommendations.[Back to Categories]Tanks/ AST Secondary Containment OnlyFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-206Stor-Safe SystemsRonald Lieper407-489-58307/03/1995Stor-Safe Model #100EQ-213Southern Pre-cast, Inc.John True800-669-22787/21/1995Spill/Leak Containment VesselAn FDEP-Approved coating is applied in accordance with manufacturer’s instruction and NACE standard RP0892-92.EQ-749Hennig, Inc.Christian Grobe866-910-17842/17/2010UL 142 Listed double wall aboveground tank with spill containment, UL File Number MH45787The tanks must be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product.EQ-875Mass TankCarl Horstmann508-923-34455/26/2019Manufactured as Mass Tank, Myers Tank, The Tank Shop. STI Certified Member. ASTs and USTs double-walled and single-walled.Also approved under EQ-434 and EQ-531.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional EquipmentThese Tanks are required to be equipped with Approved Overfill Protection, Spill Containment and Interstitial Release DetectionFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-354Specialty Tank & Equipment CompanyWilliam Mann904-353-876112/17/1998UL 142 Double-Wall Aboveground Storage Tank, the F921 Double Wall TankTanks are required to be equipped with approved overfill protection, spill containment, and interstitial release detection prior to dispensing products.EQ-372Turner Equipment Company, Inc.Joe McMichael800-672-47704/02/1999UL 142 Double-Wall Aboveground Storage TankTanks are required to be equipped with approved overfill protection, spill containment, and interstitial release detection prior to dispensing products.EQ-376Cave Hill CorporationGary Snyder800-833-76556/04/1999Atlantic Fabritech UL 142 Double-Wall Storage TankTanks are required to be equipped with approved overfill protection, spill containment, and interstitial release detection prior to dispensing products.EQ-386Com-Fab, Inc.Jim Patton740-857-11078/30/1999Com-Fab Double Wall aboveground TanksTanks are required to be equipped with approved overfill protection, spill containment, and interstitial release detection prior to dispensing products.EQ-387Newco Fabrication DivisionAL Vogel608-755-47748/30/1999Newco Generator Base Double Wall UL TankTanks are required to be equipped with approved overfill protection, spill containment, and interstitial release detection prior to dispensing products.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-400Steel Tank InstituteJoseph Mentzer847-438-826511/03/1999 – Updated 12/30/2019Fireguard Double-Wall Aboveground Storage TankConditional ApprovalEQ-401 (See EQ-677)Steel Tank InstituteJoseph Mentzer847-438-826511/03/1999F921 Double-Wall Aboveground Storage TankConditional ApprovalEQ-401 Amendment (See EQ-677)Steel Tank InstituteJoseph Mentzer847-438-82656/17/2003F921 Double-Wall Aboveground Storage TankConditional ApprovalEQ-410Assmann Corporation of AmericaWilliam Zielinski219-357-318112/22/1999Assmann Double-Wall Aboveground Storage TankTanks are required to be equipped with approved overfill protection, spill containment, and interstitial release detection prior to dispensing products. The storage tank shall be hydro-statically tested by filling the tank completely with water prior to dispensing product.EQ-417MGS IncorporatedRonald Speth717-336-75281/12/2000MGS Double-Wall Sub-Base Generator TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI-RP 200-96 prior to dispensing product.EQ-429Freeman Brothers Tank Manufacturing, Inc.Gary Freeman912-759-62103/16/2000Ul-142 Single-Wall with steel dikeConditional Approval[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-431Specialty Tank & Equipment CompanyWilliam Mann904-353-87613/28/2000Flameshield Doubled-Wall Aboveground Storage TankTanks are required to be equipped with approved overfill protection, spill containment, and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-434 (See EQ-677)Steel Tank InstituteJoseph Mentzer847-438-87665/08/2000Flameshield Doubled-Wall Aboveground Storage TankConditional ApprovalEQ-434 Amendment (See EQ-677)Steel Tank InstituteJoseph Mentzer847-438-87666/17/2003Flameshield Doubled-Wall Aboveground Storage TankConditional Approval – Includes various certified STI Members – see approval order EQ-434EQ-469Leeds Fabrication Services, Inc.Jack Ranney303-659-680112/22/2000Double-wall Base Fuel TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-471Engine & Compressor Accessories, Inc.Bill Pafford713-466-867912/22/2000Closed Top Dike Generator Base Tank and the Secondary Containment Generator Base TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-474Containment Solutions, Inc.Kevin Soeder936-756-77312/09/2001Hoover Vault and Lube Cube TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-479Cummins Southeastern Power, Inc.Greg Shapiro813-635-57012/14/2001Closed Top Dike Generator Base Tank and the Secondary Containment Generator Base TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-522Power EnclosuresRakesh Komar309-274-90004/05/2002Double-Wall Generator Base TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-523Professional Power Products, Inc.Tom Birchman815-943-90004/05/2002UL Listed 142 and 2085 double-wall Tank, UL File No. MH 26043Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-538Bendel CorporationWilliam Beaver704-596-511211/20/2002UL-142 Horizontal and Vertical Double-Walled Aboveground TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-542Alabama Tank, Inc.Kevin Woods251-577-641510/03/2002UL-142 Double-Walled Sub-Base Generator Aboveground Storage TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-543Pritchard BrownRobert Ropp800-231-2258 Ext.10210/09/2002Ul-142 Listed Closed-Top Diked Generator Base Tank, UL File No. MH 15307Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-547Horizon MFG., LLCDavid Evans352-787-700011/21/2002UL-142 Closed Top Generator Base Fuel Tank, UL File No. MH 28640Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-561 (See EQ-677)Steel Tank InstituteJoseph Mentzer847-438-82657/25/2003Flameshield Double-Walled UL-142 Listed Aboveground Storage Tank – Includes various Certified STI members – see EQ-561Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-575Acoustical Sheetmetal, Inc.William Tolbert757-456-97201/30/2004ASI’s UL-142 Listed Sub-Base Double-Wall Tank, UL File Number MH115323Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-581 (link here forEQ-400)Steel Tank InstituteJoseph Mentzer847-438-82654/14/2004 – updated 12/30/2019Fireguard Double-Walled UL-142 Listed and UL 2085 Aboveground Tank (See EQ-400)Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-582 (See EQ-677)Steel Tank InstituteJoseph Mentzer847-438-82654/14/2004F921 Double-Walled UL-142 Listed Aboveground TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-590Steel Tank InstituteSTI/SPFAJoseph Mentzer (Contact Joseph Mentzer for current licensee status)847-438-82657/14/2004Updated4/08/2020Gen-Tank Double-Walled Sub-Base Generator UL 142 and UL 142a Aboveground Storage TankTanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be installed in accordance with manufacturer’s instructions and be tested in accordance with Petroleum Equipment Institute Standard PEI/RP 200-13 prior to dispensing product.EQ-595Acoustical Control Systems, Inc.Ron Schulz252-243-01509/30/2004ACS’s UL-142 Listed Double-Wall Sub-Base Generator Tank with Spill ContainmentTanks are required to be equipped with approved overfill protection and with an interstitial release detection system if Acoustical Control System Inc. provides the spill containment devices prior to dispensing product. If not, the tanks must be equipped with approved overfill protection, spill containment system and with an interstitial release detection system if the spill containment is not provided by Acoustical Control Systems, Inc. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product. [Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-613Arc-Rite, Inc.Mike Bullock386-325-35237/20/2005Arc-Rite’s UL-142 Listed Double-Wall Tank, UL File Number MH30000Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-616Robinson Custom EnclosuresJim Birkholz920-615-34069/12/2005Enclosed Top Dike and Secondary Containment Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH26813Tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-619Smith Tank & Equipment Co.Jim Blair, III903-597-554111/23/2005UL-142 Double-Walled, and Single-Walled with Open Secondary Containment Equipped with Rain-shields Aboveground Storage Tank, UL Model Number MH3582Conditional Approval[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-622Armstrong Power Systems, LLCMubarak Kazan305-470-005812/14/2005Enclosed Top Dike and Secondary Containment Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH29496,The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-625Phoenix Products, LLCChristopher Morter904-366-227712/27/2005The Phoenix Fire Steel UL-142 and UL 2085 Listed Double-Wall Sub-Base Generator Tank with Spill Containment, UL File Number MH15322Refer to the Final OrderEQ-632International Supply Co., Inc.Chad Jenkins309-249-62112/07/2006Enclosed Top Dike and Secondary Containment Sub-Base Generator UL 142 and 2085 Listed Aboveground Storage Tank, UL File Numbers MH17176 and MH17561The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tanks.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-633Zierke Built ManufacturingKyle Zierke800-269-22222/20/2006Enclosed Top Dike Containment Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH26824The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tanks.EQ-634Sauk TechnologiesJohn Bohm262-268-38003/27/2006UL 142 Listed Double-Walled Sub-Base Generator Aboveground Storage Tank, UL File Number MH25145The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tanks. The Department Final Order EQ-249 issued on April 12, 1996 is no longer in effect.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-650Pryco, Inc.Dennis Womack217-364-446711/07/2006Double-Wall Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH17469The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank. The Department Final Order EQ-229 issued on October 31, 1995 is no longer in effect. EQ-661PowerSecure, Inc. (Formerly JAS Integrated Products Corporation)Randy Slaven813-882-31182/08/2007PowerFab Double-Wall Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH45666(See modified REF Home2 \h EQ-661 in category Tanks/ AST with Secondary Containment and Spill Containment)The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank. [Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-663Power Equipment Co. Inc.David Berube508-226-34102/26/2007Double-Wall Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH29115The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-665Hardin Industries, Inc.Dennis Black309-246-84563/20/2007Double-Wall Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH26771The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-673Highland Tank Mfg. Co.Todd Shearer717-664-06006/11/2007Double-Wall, and Double-Wall Pitch Top UL Listed Aboveground Storage Tank, UL File No. MH5086The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The Double-Wall storage tanks shall be tested in accordance with Exhibit A section 3.0 and Double-Wall Pitch Top storage tanks shall be tested in accordance with Exhibit B section 3.0 and Exhibit C prior to dispensing any regulated substances from the tank. The Department Final Orders EQ-268 issued on November 25, 1996, and EQ-270 issued on November 25, 1996, is no longer in effect. [Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-677Steel Tank InstituteSTI/SPFAJoseph Mentzer847-438-82656/20/2007 – Updated 1/07/2020Flameshield and F921 UL-142 Listed Aboveground Storage Tank with 95% Secondary Containment WrapThe tanks are required to be equipped with approved spill containment, overfill protection that shuts off the flow at 95% of nominal capacity of the primary tank, and interstitial release detection prior to dispensing product. The Secondary containment coverage of the primary tank shall be at a minimum of 95% containment of primary tank. The storage tanks shall be tested in accordance with Petroleum Equipment Institute Standard PEI/RP 200 prior to dispensing any regulated substances from the tank.EQ-681Pee Dee Tank Company of SC LLCMike Moran800-868-82658/14/2007Double-Wall UL Listed Aboveground Storage Tank, UL File No. MH12846The tanks are required to be equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Petroleum Equipment Institute Standard PEI/RP 200 prior to dispensing any regulated substances from the tank. [Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-700Engineering Manufacturing Corp.Lisley Jimenz305-639-00892/20/2008Double-Wall Sub-Base Generator UL Listed Aboveground Storage Tank, UL File No. MH30019The tanks are equipped with approved spill containment; overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-707Freeman Bros. Tank MFG., Inc.Gary Freeman229-759-62105/12/2008Double-Wall UL Listed Aboveground Storage Tank, UL File No. MH14128The tanks are equipped with approved spill containment; overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-710Cab Construction, Inc.Paul Schley507-625-22336/30/2008Double-Wall UL Listed Sub-Base Aboveground Storage Tank, UL File No. MH10130The tanks are equipped with approved spill containment; overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-721E.K. Machine Co., Inc.Gino Klein262-492-460012/18/2008Double-Wall UL Listed Sub-Base Aboveground Storage Tank, UL File No. MH46187Approved as an aboveground storage tank and containment system in the State of Florida provided that the tanks are equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-744Mayville Engineering Company, Inc.Michael Wicke920-387-4500 Ext. 64772/02/2010Double-Wall UL Listed Sub-Base Aboveground Storage Tank, UL File No. MH74278Approved as an aboveground storage tank and containment system in the State of Florida provided that the tanks are equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-747Nogales Highway Iron & Steel, Inc.Sal Fragozo520-294-15422/12/2010Double-Wall UL Listed Aboveground Storage Tank, UL File No. MH7760Approved as an aboveground storage tank and containment system in the State of Florida provided that the tanks are equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-752Atlantic TankKevin Clemmer540-437-12032/24/2010Double-Wall UL Listed Aboveground Storage Tank, UL File No. MH15058Approved as an aboveground storage tank and containment system in the State of Florida provided that the tanks are equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-766Hamilton Tanks, LLCMike Davis800-627-82654/27/2011UL-142 Listed Aboveground Tanks for flammable liquids: Vertical Secondary Containment Tanks (Double-Wall), Horizontal Secondary Containment Tanks (Double-Wall), Horizontal Single-Wall Tanks on Saddles, Horizontal Secondary Containment Tanks on Saddles and Skids (Double-Wall), Horizontal Single-Wall and Secondary Containment Tanks on Skids, Open Top Dike Aboveground Tanks for Flammable Liquids, Rectangular TanksApproved as an aboveground storage tank and containment system in the State of Florida provided that the tanks are equipped with approved spill containment, overfill protection, and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing any regulated substances from the tank.EQ-768Southern Fire Protection of Orlando, Inc.Bobby Caldwell407-323-42005/26/2011WE-Mac Manufacturing Co. – Pentair Water Double Wall Steel Storage Tanks – UL 142The tanks must be equipped with approved overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and leakage testing shall be done according to the manufacturing recommendations.EQ-792Metal Products CompanyBurcher Gammage770-945-83838/24/2012Metal Products Company UL 2075 and UL 142 Generator Sub-Base ASTInstallation and testing shall be in accordance with the manufacturer’s recommendations.EQ-809Yancey Engineered SolutionsGino Klein770-233-43976/26/2013Yancey Engineered Solutions Sub-base Aboveground Storage Tank UL File No. MH48006Installation and operation shall be in accordance with the manufacturer’s recommendations.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-824ACS Manufacturing, Inc.Ken Whisenhunt903-462-20085/16/2014ACS Manufacturing, Inc., Model EFVT.MH 28123 Special-Purpose Aboveground Storage TankInstallation and testing shall be in accordance with the manufacturer’s recommendations.EQ-826Western Global Holdings, Western House, Yate, UKAhmed Khan+1 204-772-65258/15/2014P Series and T Series Aboveground Storage Tanks under File # MH45150The installation and integrity testing procedures shall be completed in accordance with the manufacturer’s recommendations.EQ-860Kennedy Tank & Mfg. Co., Inc.Paul Bolin800-445-13441/8/2016UL 142 Single-Walled and Double-Walled Aboveground Storage TanksInstallation and tightness testing of the aboveground storage tanks must be in accordance with the manufacturer’s recommendations as provided in Exhibit A.EQ-869Delta Tank, Inc.Chris Steelman972-977-0337chris@1/17/20173000 Double-walled UL 142 Aboveground Storage TankThe tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-881Nation Tank and TrailerRobbey Barnts877-207-0320barnts@ 10/19/2017Nation Tank and Trailer Double Wall Fuel Tanks UL142A Listed. Models RTD-1000-10-12 and RTD-2000 gallon-10-12. UL File No. MH48804The tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneRegistration DateProduct’s NameCondition(s)EQ-884Superior Storage TanksTim Henderson714-226-19141/3/2018Superior Storage Tanks UL 142 listed steel ASTs. Model numbers SRD 1000-ES; 1000DW; 672-gallon DW. UL File Nos. MH14783 and MH47464.The tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-911Lannon Tank Co. LLC (dba Lannon Tank Corp.)Edgar Riteris262-251-78901/04/2019UL 142 Double-walled and Single-Walled Aboveground Storage TanksThe tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-916Fidelity ManufacturingCurt Missall352-414-47002/28/2019Fidelity Manufacturing UL 2085 Secondary Containment Aboveground Generator Base Tank. Size 550 – 20,000 gallons. File MH27650.The tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-918Certified Tank and Mfg., LLCDan Rohr217-416-47008/7/2019Certified Tank and Mfg. UL 142 Double-walled AST listed Model Number 10kHDWUL102.312The tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.[Back to Categories]Tanks/ AST with Secondary Containment Requiring Additional Equipment (Continued)File pany NameContactTelephoneRegistration DateProduct’s NameCondition(s)EQ-919Squibb Tank CompanyTimothy Squibb628-548-0141info@9/5/2019Squibb Tank Company UL 142 Single and Double-walled ASTs. MH7802The tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-930Fuelogic, LLCTim Coons404-996-12824/2/2020Fuelogic Custom Made Double-walled UL 142 ASTs – MH60877The tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-936Southern Tank & Mfg. Co.Charles Mackey270-684-23215/29/2020Shop fabricated Carbon Steel and Stainless-Steel Single and Double-walled UL 142 Tanks. UL File No. MH3074The double-walled tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.Tanks/ AST Vault SystemFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-419ConVault FloridaJim Remington800-642-15401/14/2000FuelVault? SystemEQ-568Guardian Containment, Corp.Kelly Stanton800-797-826512/11/2003UL Listed Armor Vault System File Number MH18494Conditional ApprovalEQ-765Western Global Holdings, Western House, Yate, UKAhmed Khan+1 204-772-65254/15/2011TRANSCUBE as 05TCG, 10TCG, 20TCG, 30TCG, 50TCG-AST, 100TCG-AST, UNICUBE AST as FCP250, FCP500, FCP1000, 200TTS-AST, 400TTS-AST, 100TT-IMDG, 200TT-IMDG and 200TT-IMDG-CAB under UL File # MH-45322Approved in the State of Florida as a secondarily contained UL 142 listed AST with spill containment and dispensing system containment.Tanks/ AST with Secondary Containment and Spill ContainmentThese Tanks are Required to be Equipped with Approved Overfill Protection and Interstitial Release DetectionFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-385American Access Technologies, Inc. (Formerly Genco, Inc.)Steve Watkins352-473-54008/30/1999Genco Double-Wall Sub-Base Generator TankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing productsEQ-413Control Equipment & Sales, Inc.Robert Melton205-989-009011/22/1999Wedlake Fabricating Double-Wall Sub-Base Generator TankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-427TAW Custom EquipmentDaniel Barron813-621-56613/16/2000Taw Custom Equipment Double-Wall Sub-BaseGenerator TankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-432Pritchard Brown of Florida, Inc. (Formerly Electric Specialty, Inc.)Charles Gears800-866-94863/28/2000Electric Specialty double-Wall closed dike generator base tankTanks are required to be equipped with approved overfill protection, and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-460Chillicothe Metal Co., Inc.Jeff Bessler309-274-542110/12/2000Double-Wall & closed top dike tankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-478Bendel CorporationBill Beaver704-596-51122/09/2001Double-Wall Generator Base TankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-482Wilson MFG., Inc.Greg Lepine800-446-35002/12/2001UL 142 Double-Wall and UL-142 Closed Top Diked Generator Base TanksTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-483Isom Brothers, Inc.Scott Frerichs208-459-60772/27/2001UL 142 Double-Wall Base Tank and UL 2085 Double-Wall Vault TankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-484Pritchard Brown of Florida, Inc.Frank Miller352-742-71252/27/2001UL-142 Double-Wall Tank, PB StyleTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-496BN ManufacturingErik Kientz800-684-90964/17/2001Double-wall Generator Base TankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued) File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-497Fidelity Manufacturing, LLC. (Formerly JRS Custom Fabrication, Inc.)Curt Missall352-414-47005/10/2001Updated1/02/2019Double-Wall Generator Base Tank – Capacities 25 – 20,000 gallonsTanks are required to be equipped with approved spill containment, overfill protection and interstitial release detection prior to dispensing product. See also EQ-593 and EQ-778. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product. EQ-504Bob Gerena Fabricating, Inc.Robert Gerena863-425-17719/27/2001UL-142 Double-Wall Sub-Base Generator TankTanks are required to be equipped with approved overfill protection and interstitial release detection prior to dispensing products. The storage tank shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-518Harvard Integrations (Formerly Lecturus Corporation and originally D.T.S., Inc.)Adam Aasen605-498-91712/19/2002UL 142 Double-Wall Sub-Base Generator TankTanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-528Total Energy Systems, LLCChristopher Stiles888-548-14004/29/2002Double-Wall Generator Base Tank with Spill ContainmentTanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-533Advanced Manufacturing & Power Systems, Inc.Jim Sanders386-822-55655/23/2002Double-Wall Generator Base Tank with Spill ContainmentTanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-544Precision Quincy Industries, a Division of The Armor Group(Formerly Victory Industrial Products, Inc.)The Armor Group888-312-544211/05/2002Updated9/22/2015Double-Wall Generator Base Tank with Spill Containment, UL File Number MH 17934Tanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-554Bendel CorporationWilliam Beaver704-596-51123/21/2003Tent tank, UL 142 Listed Horizontal Double-Wall Tank with Spill Containment, UL File Number MH8552 Vol. 2Tanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-565United Alloy, Inc.Mark Gossens608-758-4717 Ext. 10910/23/2003United Alloy’s UL-142 Listed Sub-Base Double-Wall Tank with Spill Containment, UL File Number MH28874Tanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-565RUnited Alloy, Inc.Mark Gossens608-758-4717 Ext. 10910/23/2003United Alloy’s UL-142 Listed Sub-Base Double-Wall Tank with Spill Containment, UL File Number MH28847 (Correction of UL File Number MH28874 to MH28847)Tanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.EQ-566Generac Power Systems, Inc.Jeff Jonas262-544-4811 Ext. 210410/23/2003Generac’s UL-142 Listed Sub-Base Double-Wall Tank with Spill Containment, UL File Number MH18459Tanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-567Global Power Components CorporationMark Hopkins414-475-300011/28/2003Global Power Components’ UL-142 Listed Sub-Base Double-Wall Tank with Spill Containment, UL File Number MH18481Tanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product. The Department Final Order EQ-246 issued on April 5, 1996 is no longer in effect.EQ-572Heatec, Inc.Terry Rutlege423-821-52001/16/2004Heatec, Inc.’s UL-142 Listed Double-Wall Tank with Spill Containment, UL File Number MH14038Tanks are required to be equipped with approved overfill protection device and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of Petroleum Equipment Institute Standard PEI/RP 200-96 prior to dispensing product. The Department Final Order EQ-246 issued on April 5, 1996 is no longer in effect.EQ-593Fidelity Manufacturing, LLC. (Formerly JRS Custom Fabrication, Inc.)Mark Stromwall352-414-47009/24/2004JRS Fill Spill Containment for ASTsApproved for use for spill containment for double-walled sub-base generator aboveground tanks that were approved under Department file number EQ-497 on May 10, 2001 in the State of Florida.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-595Acoustical Control Systems, Inc.Ron Schulz252-243-01509/30/2004ACS’s UL-142 Listed Double-Wall Sub-Base Generator Tank with Spill ContainmentTanks must be equipped with approved overfill protection and with an interstitial release detection system if Acoustical Control System Inc. provides the spill containment devices prior to dispensing product. If not, the tanks must be equipped with approved overfill protection, spill containment system and with an interstitial release detection system if the spill containment is not provided by Acoustical Control Systems, Inc. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product.EQ-609TankSafe, Inc.Reinhard Schuetz403-291-39374/08/2005UL Listed Double-Wall Tank with Spill Containment, UL File Number MH29775The tanks are required to be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with manufacturer’s instruction attached as Exhibit A prior to dispensing product. [Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-636Advanced Manufacturing & Power Systems, Inc.Jim Sanders386-822-55653/29/2006UL 2085 Listed Double-Walled Sub-Base Generator Aboveground Storage Tank with Spill Containment, UL File Number MH16661The tanks are required to be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product.EQ-647Superior Systems & Technologies, Ltd.Monica Brown325-690-02488/08/2006UL 142 Listed Double-Walled Sub-Base Generator Aboveground Storage Tank with Spill Containment, UL File Number MH10272Approved as an aboveground storage tank with secondary containment and with spill containment in the State of Florida. The tanks must be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product.EQ-655Safe-T-Tank Corp.Amy Bartis203-237-632010/30/2006UL 142 Listed Double-Walled Sub-Base Generator Aboveground Storage Tank with Spill Containment, UL File Number MH16800Approved as an aboveground storage tank with secondary containment and with spill containment in the State of Florida. The tanks must be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s) REF Home REF Home EQ-661Power SecureJohn Saunders336-202-54973/23/2017Double-wall sub-base generator modified with fill/spill container* (*The 2007 submission of EQ-661 required tanks to be equipped with approved spill containment)The tanks are required to be equipped with approved / registered overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with PEI/RP 200-13 and spill containment with PEI/RP1200-12 prior to dispensing product.EQ-662Tramont CorporationLogan Tatem414-906-20412/09/2007the UL 142 Listed Double-Walled Sub-Base Generator Aboveground Storage Tank with Spill Containment, UL File Number MH17470The tanks are required to be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product. The Department Final Order EQ-228 issued on October 25, 1995 is no longer in effect. EQ-736Pryco, Inc.Dan Lyons217-364-44677/23/2009DEP Approval of the UL 142 Listed Pryco’s double wall day tank with spill containment, UL File Number MH12807The tanks must be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product. [Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-750ConVault, Inc.Dan Rockefeller800-642-15402/22/2010UL 142 Listed double wall aboveground tank with spill containment, UL File Number MH15966The tanks must be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product. The Department Final Orders EQ-201 issued on May 3, 1995, is no longer in effect. EQ-754Del Zotto Products of FloridaDonald Trumble352-351-38343/11/2010UL 142, and UL 2085, Listed double wall aboveground tank with spill containment, UL File Numbers MH17021 and MH16810The tanks must be equipped with approved overfill protection and with an interstitial release detection system prior to dispensing product. The storage tanks shall be tested in accordance with Chapter 13 of the Petroleum Equipment Institute’s Standard PEI/RP 200-96 prior to dispensing product. The Department Final Orders EQ-043 issued on September 17, 1991, is no longer in effect. EQ-785Freeman Enclosure Systems LLCDale Freeman513-488-85634/11/2012Special purpose AST Tanks under UL Listings UL142 & UL2085 Reference File #s: MH47836 Vol. 1; MH47836 Vol. ST1; MH47836 Vol. ST2; MH47836 Vol. CN1; MH48714 Vol. ST1; and MH48714 Vol. CN1The listed special purpose ASTs are to be used primarily as stand-by generator tanks. Installation shall be made in accordance with the manufacturer’s recommendations.[Back to Categories]Tanks/ AST with Secondary Containment and Spill Containment (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-785-RFreeman Enclosure Systems LLCCassie Freeman513-488-85634/26/20171) UL 142, 2085 listed AST special purpose to be used as standby generator tank. Drawings updated.2) Spill containment, 7 (new) and 5-gallon (updated) capacities. 3) Alarm Panels (updated wiring and look) both 12V and 24V. AP3 and AP3R to be replaced.The listed special purpose ASTs are to be used primarily as stand-by generator tanks. Installation shall be made in accordance with the manufacturer’s recommendations.EQ-850Advanced Manufacturing and Power SystemsJoseph Scofield386-822-556510/23/2015UL 2085 Above Ground Fuel Storage Tank UL 142 File #MH29522The tanks shall be installed according to the manufacturer’s requirements.EQ-865Tower Power Solutions LLCSteve Zastrow414-214-77006/07/2016Special-Purpose Aboveground Storage Tanks The tank must be equipped with an approved interstitial release detection system prior to dispensing. Installation, testing and operation shall be made in accordance with manufacturer’s recommendations.EQ-935EMILIANA SERBATOI SRLGuastalli Giulio+3934023482755/27/2020AM-TANK (250 – 800 – 2300) Skid mounted diesel tank – UL 142 equivalent tankThe dispensing portion of the diesel tank must be located at least 50 feet from the storage tank. The tank is provided with overfill protection. Installation, testing and operation shall be made in accordance with manufacturer’s recommendations.[Back to Categories]Tanks AST Single-Wall OnlyFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-338Newberry Tanks & Equipment LLCBrian Brinkley800-643-939510/08/1998UL 142 Single-Wall tankUL 142 Single-Walled tanks that are only installed in approved steel dikes or concrete dikes shall meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-352Modern Welding Company Florida, Inc.Gene Schober407-843-127011/22/1998UL 142 Single-Wall tankUL 142 Single-Walled tanks that are only installed in approved steel dikes or concrete dikes shall meet all applicable provisions of Rule 62-761.500, F.A.C. When storing High Viscosity Product as defined in the Rules, the tanks do not require secondary containment nor release detection.EQ-354Specialty Tank & Equipment CompanyWilliam Mann904-353-876112/17/1998UL 142 Single-Wall tankUL 142 Single-Walled tanks that are only installed in approved steel dikes or concrete dikes shall meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-374Turner Equipment Company, Inc.Joe McMichael919-734-23514/22/1999UL 142 Single-Wall tankUL 142 Single-Walled tanks that are only installed in approved steel dikes or concrete dikes shall meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-429Freeman Brothers Tank Manufacturing, Inc.Gary Freeman912-759-62103/16/2000Ul-142 Single-Wall TanksUL 142 Single-Walled tanks that are only installed within approved steel dikes or concrete dikes shall meet all applicable provisions of Rule 62-761.500, F.A.C.[Back to Categories]Tanks AST Single-Wall Only (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-446Cave Hill CorporationGary Snyder800-833-76558/23/2000UL-142 Single-Wall TanksUL 142 Single-Walled tank must be installed in an approved steel or concrete dike, and it must meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-490Service Welding & Machine Co., Inc.Carl Greer502-585-42955/10/2001UL-142 Single-Wall TanksUL 142 Single-Walled tank must be installed in an approved steel or concrete dike, and it must meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-501General Industries, Inc.Jamie Stanley919-751-17917/30/2001UL-142 Single-Wall TanksThe UL 142 Single-Walled tank must be installed in an approved steel or concrete dike, and it must meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-521Tampa Tank, Inc./Florida Structural SteelAdam Bourgeois813-241-4261Ext. 2093/19/2002UL 142 Single-Wall Aboveground Storage TankUL 142 Single-Walled tank must be installed in an approved steel or concrete dike, and it must meet all applicable provisions of Rule 62-761.500, F.A.C.[Back to Categories]Tanks/ AST Single-Wall Only (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-542Alabama Tank, Inc.Kevin Woods251-577-641510/03/2002UL-142 Single-Walled Aboveground Storage Tank Model No. ATISWThe UL 142 Single-Walled tank must be installed in an approved steel or concrete dike, and it must meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-573Highland Tank & MFG. Co.John Schmucker336-218-08011/20/2004UL-142 Single-Walled Aboveground Storage Tank, UL Model Number MH5086Tanks must be installed in an approved steel or concrete dike, and that it must meet all applicable provisions of Rule 62-761.500, F.A.C.EQ-619Smith Tank & Equipment Co.Jim Blair, III903-597-554111/23/2005UL-142 Single-Walled Aboveground Storage Tank, UL Model Number MH3582Conditional ApprovalEQ-702Metal Products CompanyBurcher Gammage770-945-83833/12/2008UL-142 Single-Walled Aboveground Storage Tank, UL Model Number MH3513The tank must be installed in an approved steel or concrete dike, and that it must meet all applicable provisions of Rule 62-762.501, F.A.C.EQ-703Heatec Inc.Russ Earp800-235-52003/27/2008UL-142 Single-Walled Aboveground Storage Tank, UL Model Number MH14038The tank must be installed in an approved steel or concrete dike, and that it must meet all applicable provisions of Rule 62-762.501, F.A.C.EQ-711Hall Tank Company LLCJonathan Hill501-945-8729Ext. 2317/3/2008Single-Wall UL Listed Aboveground Storage Tank, UL File No. MH6146The tank must be installed in an approved steel or concrete dike, and that it must meet all applicable provisions of Rule 62-762.501, F.A.C.[Back to Categories]Tanks/ Single-Wall Only (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-728Clawson Tank CompanyBrian Shelton800-272-13672/26/2009Single-Wall UL Listed Aboveground Storage Tank, UL File No. MH17150The tank must be installed in an approved steel or concrete dike, and that it must meet all applicable provisions of Rule 62-762.501, F.A.C.EQ-761Lide IndustriesDwain Broussard254-562-023312/15/2010Lide Industries UL-142 Aboveground Storage TankApproved in the State of Florida as a shop fabricated AST provided that any single-walled AST is installed in an impervious dike field area that meets the performance standards in Rule 62-762.501, F.A.C.EQ-766Hamilton Tanks, LLCMike Davis800-627-82654/27/2011UL-142 Listed Aboveground Tanks for flammable liquids: Vertical Secondary Containment Tanks (Double-Wall), Horizontal Secondary Containment Tanks (Double-Wall), Horizontal Single-Wall Tanks on Saddles, Horizontal Secondary Containment Tanks on Saddles and Skids (Double-Wall), Horizontal Single-Wall and Secondary Containment Tanks on Skids, Open Top Dike Aboveground Tanks for Flammable Liquids, Rectangular TanksApproved in the State of Florida as a shop fabricated UL 142 listed AST. EQ-845Jake’s Machining & Rebuilding Services Inc.Jake Krippelz III630-892-32913/23/2015Part #836-1715- 572-gallon Single Wall Aboveground Storage Tank,Part #836-1689- 849-gallon Single Wall Aboveground Storage Tank, and Part #836-1690- 1100-gallon Single Wall Aboveground Storage TankThe aboveground single-walled storage tanks must be installed with secondary containment and the installation, operation, and maintenance procedures for the aboveground single-walled storage tanks shall be made in accordance with the manufacturer’s recommendations. HYPERLINK \l "Home" [Back to Categories]Tanks/ Single-Wall Only (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-848OnQuestChristopher Fox909-451-05007/15/2015SLOPS Aboveground Storage TankAboveground Storage Tank shall be installed within an impervious secondary containment system.EQ-857Assmann Corporation of AmericaSteve Rowlison888-357-318112/23/2015Assmann Corporation of America Single-Walled Polyethylene Aboveground Storage TankAboveground Storage Tank shall only store contents that are chemically compatible with the polyethylene wall and be installed with an impervious secondary containment system.EQ-860Kennedy Tank & Mfg. Co., Inc.Paul Bolin800-445-13441/08/2016UL 142 Single-Walled and Double-Walled Aboveground Storage TanksThe UL 142 Single-Walled AST must be installed within secondary containment and installation and tightness testing of the aboveground storage tanks must be in accordance with the manufacturer’s recommendations as provided in Exhibit A.EQ-886Titan Industries, Inc.Shawn DeFoyshawndefoy@ 281-353-36002/01/2018UL 142 Single-Walled 1,000 – 10,000-gallon AST The aboveground single-walled storage tank must be installed with secondary containment and the installation, operation, and maintenance procedures for the aboveground single-walled storage tanks shall be made in accordance with the manufacturer’s recommendations.Tanks/ Single-Wall Only (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-889Watkins Industries, Inc.Jason SadlerJason@watkins- 940-325-600802/28/2018UL 142 Single-Walled 8,000-gallon TK – 12X9-6 and 12,000-gallon TK – 13-6X11 AST UL FILE No. MH60306The aboveground single-walled storage tank must be installed with secondary containment and the installation, operation, and maintenance procedures for the aboveground single-walled storage tanks shall be made in accordance with the manufacturer’s recommendations.EQ-904Tiger Tanks, Inc.Darryck Selk or Carol Bimat888-818-265711/06/2018UL 142 Single-Walled Aboveground Storage Tank – Custom MadeThe aboveground single-walled storage tank must be installed with secondary containment and the installation, operation, and maintenance procedures for the aboveground single-walled storage tanks shall be made in accordance with the manufacturer’s recommendations.EQ-906Tiger Tanks, Inc.Darryck Selk or Carol Bimat888-818-265711/06/2018API 650 Single-Walled Aboveground Storage Tank – Custom MadeThe aboveground single-walled storage tank must be installed with secondary containment and the installation, operation, and maintenance procedures for the aboveground single-walled storage tanks shall be made in accordance with the manufacturer’s recommendations.EQ-911Lannon Tank Co. LLC (dba Lannon Tank Corp.)Edgar Riteris262-251-78901/04/2019UL 142 Single-Walled and Double-walled Aboveground Storage TanksThe aboveground single-walled storage tank must be installed with secondary containment and the installation, operation, and maintenance procedures for the aboveground single-walled storage tanks shall be made in accordance with the manufacturer’s recommendations.Tanks/ Single-Wall Only (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-919Squibb Tank CompanyTimothy Squibb628-548-0141info@9/5/2019Squibb Tank Company UL 142 Single and Double-walled ASTs. Capacities from 1,000-50,000 gallons. UL File No. MH7802The tanks must be equipped with registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-925Chemical Containers, Inc.Michael Motis863-528-43401/08/2020Updated2/5/2020NORWESCO 2,100 -20,000-gallon Polyethylene Aboveground Vertical Tanks – T1124N to T1125N storage tanksThe tanks must be equipped with secondary containment, registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-936Southern Tank & Mfg. CoCharles Mackey270-684-23215/29/2020Shop fabricated Carbon Steel and Stainless-Steel Single and Double-walled UL 142 Tanks. UL File No. MH3074Single-walled tanks must be equipped with secondary containment, registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.EQ-940Industrial Metal FabricatorsLes Brown/Joe Felix604-509-93227/16/2020Industrial Metal Fabricator single-walled carbon steel UL-142 AST for high viscosity products. Model 113094, UL File No. MH 14571 (8,000 gals)As applicable, single-walled tanks must be equipped with secondary containment, registered overfill protection, spill containment and with an interstitial release detection system prior to dispensing product. Installation and testing shall be done according to the manufacturer’s recommendations.Tanks/ AST Field Erected AST with Release Prevention BarriersFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-305Kingsno ProjectsSteve Coats800-874-771212/11/1997Deltaliner SystemConditional Approval for Field Erected TanksEQ-351MEPCOSteve Holmes800-880-587812/22/1998Amust Dual Floor and Monitoring SystemConditional Approval for Field Erected TanksEQ-358International Paint Co. LLC (Formerly ICI Devoe Coating)Curtis HarveyBenny Carver404-433-7563 or 229-247-024012/22/1998Interline 984 with mat reinforcement (DeVmat 3D Plus System)Conditional Approval for Field Erected Tanks. Meets API-653EQ-430International Paint Co. LLC (Formerly Industrial Environmental Coatings Corporation)Curtis HarveyBenny Carter404-433-7563 or 229-247-02403/28/2000Interline 994 with mat reinforcement (Enviromat? System)Conditional Approval for Field Erected Tanks. Meets API-653EQ-487Eco-Tank Systems, LLCTom Keefer610-659-31563/15/2001Tank Bottom Monitoring SystemConditional ApprovalEQ-585Toscano Engineering, Inc.John Toscano954-524-28094/15/2004Enviro-Steel Double Bottom systemEQ-684Toscano Engineering, Inc.John Toscano954-524-28098/30/2007Steel-Shield? Double Bottom systemEQ-737Atkinson, Diner, Stone, Mankuta & Ploucha, P.A. representing B2 Secondary Containment System, LLCKyle Hooper954-925-55018/07/2009B2 DBS secondary containment systemEQ-745Mott-Smith Consulting Group, LLC (Tankbau GmbH)Marshall Mott-Smith850-391-98352/10/2010Tankbau IV, IV-A, V, and V-A Release Prevention Barrier SystemThe base line inspection and API 653 are performed prior to the installation of the release prevention barrier in accordance with Chapter 62-762, F.A.C. requirements.[Back to Categories]PipingPiping With Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Flexible Piping)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-181Containment Technologies, Inc.Michael Nolan215-993-814010/05/1994Perma Flexx Piping SystemEQ-188Total Containment, Inc.Tony Adamson610-666-21702/17/1995EnviroflexThe Final Order was rescinded on 10/17/2002.EQ-215Furon CompanyLucas Ford813-896-45408/16/1995Furon Co-Flex SystemEQ-242Smith Fiberglass Products, Inc.Bill Pierpont813-784-96074/08/1996SmithFlexEQ-265Total Containment, Inc.Tony Adamson610-666-21708/27/1996VaporflexEQ-266Total Containment, Inc.Tony Adamson610-666-21708/27/1996OmniflexEQ-285OPWGene Pope813-969-19005/07/1997OPW PISCESEQ-361Western Fiberglass, Inc.Rick Lewis800-688-33752/16/199934C9 Double Wall Co-Flex PipingEQ-511OPW (Formerly Environ Products, Inc.)Gene Pope813-969-190012/01/2001GeoFlex-D, and GeoFlex-S Piping SystemsThe Department’s previous approvals EQ-140, dated August 12, 1993, and EQ-174 dated June 14, 1994, are no longer in effect.EQ-526OPW (Formerly Environ Products, Inc.)Gene Pope813-969-19004/19/2002GeoDuct piping systemAll GeoDuct piping shall be installed with appropriate GeoDuct entry boots and reducer donuts when single wall pressurized, or suction piping is used.EQ-550Total Containment, Inc.Tony Adamson610-666-21701/24/2003Enviroflex PP1503, PP1503F, PP2503, PP2503F, and SF4500 piping systemsConditional ApprovalEQ-552Total Containment, Inc.Tony Adamson610-666-21701/24/2003Omniflex model numbers CP 1503, CP 1503F, CP 1503BF, CP2503F, and CP2503BF piping systemsConditional Approval[Back to Categories]Piping/ Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Flexible Piping Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-569Franklin Fueling Systems (Formerly Advanced Polymer Technology, Inc.)Gary Saltz608-838-87861/05/2004APT model numbers P-075SC, P-100-SC,P-150-SC, P-175-SC,P-200-SC, and P-250-SC piping systemsConditional Approval – This Order is only valid until 7/7/2009EQ-569AmendmentFranklin Fueling Systems (Formerly Advanced Polymer Technology, Inc.)Gary Saltz608-838-87867/07//2004APT model numbers P-075SC, P-100-SC,P-150-SC, P-175-SC,P-200-SC, and P-250-SC piping systemsConditional Approval – This Order is only valid until 7/7/2009EQ-618Franklin Fueling SystemsGary Saltz608-838-878611/03/2005APT model numbers XP Series piping systemsEQ-648OPW Gene Pope813-969-19008/15/2006OPW Pisces Model CPN15, CPN20, UL File Number MH19528 Series piping systemsEQ-649OPW (Formerly Environ Products, Inc.)Gene Pope813-969-190010/12/2006OPW Flexworks models c075(3/4”), c10(1”), c15(1.5”), UL File Number MH16678 Series piping systemsEQ-692Brugg PipesystemsUrs Maire706-346-401112/10/2007Flexwell-HL piping system, UL File Number MH45398Flexwell-HL has been updated on EQ-791EQ-709OPWGene Pope813-969-19006/26/2008OPW Flexworks Loop System, UL File No. MH16678Conditional ApprovalEQ-715OmegaFlex, Inc.David Strick610-524-64849/02/2008DoubleTrack Piping System, UL File No. MH 45578EQ-772Pope & Associates, Inc.Gene Pope813-969-19007/21/2011OPW Flexwork Piping – Models C075A; C10A; C15A; C20A and C30AInstallation and maintenance shall be according to the manufacturer’s recommendations.[Back to Categories]Piping/ Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Flexible Piping Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-779OmegaFlex, Inc.David Strick610-524-648412/14/2011OmegaFlex DoubleTrac Double Containment PipeOmegaFlex DoubleTrac Double Containment Pipe may be used as a double-walled piping system associated with aboveground or underground storage tanks. Installation shall be in accordance with the manufacturer’s recommendations.EQ-791Priority Sales Associates, Inc.Steve Tretter407-389-01998/16/2012Brugg Pipesystems Metallic Underground Fuel Pipe Product Type: SECON X, SECON X II and FLEXWELL-HL. UL File No. MH45398Approved for underground or aboveground piping. Install and test according to manufacturer’s recommendations.EQ-791RPriority Sales Associates, Inc.Steve Tretter407-389-01994/11/16Brugg Pipesystems Metallic Underground Fuel Pipe and Piping Over Water, Product Type: SECON X, SECON X II, and FLEXWELL HLApproved in the State of Florida as an underground piping system and as piping over water. Installation and testing shall be in accordance with the manufacturer’s recommendations.[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-820S. Bravo Systems, Inc.Micah Nelson800-282-7286323-888-41333/24/2014S. Bravo Systems Entry Fittings and Entry Fitting Retrofits for Fiberglass Sumps: F Series Retrofit-S FittingsThe fittings may be used to provide piping access through piping sumps and dispenser liners associated with underground and aboveground storage tanks.EQ-864S. Bravo Systems, Inc.Jonathan Smith800-282-7286323-888-41335/10/2016S. Bravo Systems, Inc.Direct Replacement – Bolted Fittings and Direct Replacement – Thread on Penetration FittingsThe fittings may be used to provide piping access through piping sumps and dispenser liners associated with underground and aboveground storage tanks.Piping/ Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Piping Entry Fittings) Pipe Entry Fittings do not require Equipment Registration effective January 11, 2017.Piping/ Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Semi Rigid Piping)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-297Franklin Fueling Systems (Formerly PetroTechnik Ltd.)Sandra Adams608-838-566810/29/1997UPP Pipework Underground Fuel Piping SystemEQ-525Nupi Americas, Inc.Kym Clayton281-590-44714/19/2002Smartflex Containment Plus Piping Systems, UL File Number MH25887EQ-666Franklin Fueling Systems (Formerly PetroTechnik, Inc.)Sandra Adams856-273-97003/23/2007UPP Extra Series Piping system, UL File Number MH 25274EQ-683Advantage Earth Products, Inc. (Formerly – Innovative Petroleum Products, LLC)George Boyazis608-838-56688/20/2007AEP Electr-O-Fuze MH47372 (Formerly – Petroplas Piping System, UL File Number MH29826)EQ-816Franklin Fueling SystemsSandra Adams608-838-566810/28/2013UPP EVOH Piping SystemThe installation and operation of the semi-rigid piping shall be in accordance with the manufacturer’s recommendations. EQ-David Hurtado386-690-63615/15/2014Perma-Pipe, Inc. Type FS Secondary Containment PipingInstallation and integrity testing in accordance with manufacturer recommendations. [Back to Categories]Piping/ Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Rigid Piping)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-123Centron CorporationJim Stevens817-325-13414/05/1993Centron Fiberglass PipingEQ-252Smith Fiberglass Products, Inc.Bill Pierpont813-784-96074/23/1996Red Thread IIAEQ-291Ameron InternationalJoie Folkers713-690-77777/30/1997Dualoy? 3000/LCXEQ-378Ameron InternationalJoie Folkers713-690-77776/01/1999Dualoy? 3000/LEQ-660K-Tank Systems, LLC (Formerly Petrofuse ZP LLC)Lissette & Ralph Calderon305-856-82832/07/2007Petrofuse ZP Series Piping system, UL File number MH29320EQ-David Hurtado386-690-636111/24/2015Perma-Pipe Ultra-FS? Secondary Containment Piping for fuel-oil applicationsPiping Over Water Piping Over Water/ Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release DetectionFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-433Advanced Polymer Technology, Inc.Gary Saltz608-838-87865/08/2000Pressure Series Piping with MD DuctingApproval of this storage tank system equipment by the Division of Waste Management does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits or other authorizations, as applicable.[Back to Categories]Piping Over Water / Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Continued) File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-441OPW (Formerly Environ Products, Inc.)Gene Pope813-969-19006/19/2000GeoFlex-M Piping SystemThe manufacturer shall submit all continuing test results (including air pressure tests) along with a necessary design changes related to this Order to the Department within one year from January 21, 2000. Approval of this storage tank system equipment by the Department of Environmental Protection does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits, or other authorizations, as applicable. The Department’s previous approval EQ-421, dated January 21, 2000, is hereby revoked. [Back to Categories]Piping Over Water / Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Continued) File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-562Ameron InternationalJoie Folkers713-690-77778/28/2003Ameron MCX System for the Ameron Marina Piping SystemApproval of this storage tank system equipment by the Department of Environmental Protection does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits, or other authorizations, as applicable.EQ-617Advantage Earth Products, Inc. (Formerly Innovative Petroleum Products, LLC)Georges Boyazis404-610-57939/09/2005AEP Electr-O-Fuze (Formerly – Petroplas FR) Piping for Marina Piping SystemsApproval of this storage tank system equipment by the Department of Environmental Protection does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits, or other authorizations, as applicable.[Back to Categories]Piping Over Water / Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-712Nupi Americas, Inc.Kym Clayton281-590-44717/25/2008Smartflex Piping System for Marina Piping SystemsThe piping slope of 1/8” per foot between dispenser sump, transition sump on the dock and shoreline is not required provided the dispenser and transition sump is equipped with approved electronic liquid sensors. Approval of this storage tank system equipment by the Department of Environmental Protection does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits, or other authorizations, as applicable.EQ-717Brugg North America, Inc.Urs Maire706-346-401112/10/2007Flexwell-HL piping system for Marine Piping System The piping slope of 1/8” per foot between dispenser sump, transition sump on the dock and shoreline is not required provided the dispenser and transition sump is equipped with approved electronic liquid sensors. Approval of this storage tank system equipment by the Department of Environmental Protection does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits, or other authorizations, as applicable.[Back to Categories]Piping Over Water / Piping with Enclosed Secondary Containment Equipped with Sump Liner, Dispenser Liner, and Interstitial Release Detection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-731Franklin Fueling Systems (Formerly PetroTechnik Ltd.)Sandra Adams608-838-56684/08/2009Updated 9/02/2015PetroTechnik UPP Piping System for Marina Piping Systems (New Modifications effective 9/02/2015 – see on-line file for details)The piping slope of 1/8” per foot between dispenser sump, transition sump on the dock and shoreline is not required provided the dispenser and transition sump is equipped with approved electronic liquid sensors. Approval of this storage tank system equipment by the Department of Environmental Protection does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits, or other authorizations, as applicable.EQ-751OmegaFlex, Inc.David Strick800-355-10392/23/2010DoubleTrac Series Piping System for Marina Piping SystemsThe piping slope of 1/8” per foot between dispenser sump, transition sump on the dock and shoreline is not required provided the dispenser and transition sump is equipped with approved electronic liquid sensors. Approval of this storage tank system equipment by the Department of Environmental Protection does not grant authority for installing structures over the waters of the state without appropriate local, state or federal permits, or other authorizations, as applicable.EQ-791RPriority Sales Associates, Inc.Steve Tretter407-389-01994/11/2016Brugg Pipesystems Metallic Underground Fuel Pipe and Piping Over Water, Product Type: SECON X, SECON X II, and FLEXWELL HLApproved in the State of Florida as an underground piping system and as piping over water. Installation and testing shall be in accordance with the manufacturer’s recommendations.[Back to Categories]Bulk Product Piping with Secondary ContainmentFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-465International Paint Co., LLC (Formerly Industrial Environmental Coatings Corporation)Curtis HarveyBenny Carver404-433-7563229-247-024012/04/2000Enviromat? SystemConditional Approval as a method of secondary containment for underground bulk product piping. DISCONTINUED PRODUCTCoatings (Liners) AST/UST Synthetic or ConcreteFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-034Poly Flex, Inc.A.M. Yazdoni800-527-33237/03/1991Polyflex HDPEMinimum 60 mils thicknessEQ-049Futura Coating, Inc.Lee Curry770-596-955110/28/1991GeothaneMinimum 60 mils on earthen substrate and 30 mils on concrete substrateEQ-056Seaman CorporationFelon R. Wilson615-691-94761/14/1992XR-5 GeomembraneMinimum 30 mils thicknessEQ-085PolySpec CorporationPhillip Greer704-566-03878/05/1992ITW Poly Spec / Thiokol ProductsMinimum 60 mils on earthen substrate and 30 mils on concrete substrateEQ-160Bixby International CorporationPaul Darby508-465-41003/03/1994VLPU-40Minimum 42 mils on earthen and concrete substrateEQ-163Palco Lining, Inc.Wayne Behrsin908-753-62623/14/1994Elvaloy Fabric Reinforced SystemMinimum 36 mils on earthen and concrete substrateEQ-189Polymerica, Inc.Pending updatePending update2/17/1995Polymerica Secondary Containment Coating systemUsed for concrete sealant. Polymerica Corp. Needs to be consulted for the design.EQ-205In-Line Plastics, Inc.Paul Jopline800-364-76885/26/1995In-Liner HDPE LinersMinimum 60 mils on earthen substrate and 60 mils on concrete substrate.[Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-220MPC Containment Systems, Inc.Dennis O’Brien800-621-014610/09/1995Petrogard VI , and Petrogard XPetrogard VI with a minimum of 30 mils over earthen or concrete substrate and Petrogard X with a minimum of 40 mils over earthen or concrete substrate.EQ-238CIM IndustriesDr. Stephens603-924-94812/05/1996CIM 1000, CIM 1061Minimum 60 mils on steel and concrete substrate.EQ-251Cooley, Inc.Richard Cunnigham401-724-90004/22/1996FML87, FML87-23, L2810-6174H(Hytrel), Coolguard HR 36 Coolguard HR 45Minimum of Following thickness on steel, concrete, or earth substrate: FML87 is 40 mils, FML87-23 is 30 mils, L2810-6174H (Hytrel) is 36 mils, Coolguard HR 36 is 36 mils, and Coolguard HR 45 is 45 mils.EQ-281Willamet Valley CompanyRob Loomis541-484-96215/02/1997PolyQuick? Polyurea Coating Synthetic Liners, X-Shield Polyurea Coating synthetic LinerMinimum 60 mils on earthen and concrete substrate.EQ-287Colloid Environmental Technologies CompanyGary Ezell813-527-06057/08/1997Claymax and Bentomax Clay LinersCondition € Removed 10/23/2015EQ-290International Paint Co. LLC (Formerly Ceilcote Corrosion Control, Division of KCH)Curtis HarveyBenny Carter404-433-7563229-247-02407/31/1997Ceilcote, Interline? (850, 984, 994), Enviroline? 376, Devoe Lining Systems (MBT Ceilcote AST Lining Installation)Lining of aboveground tank bottoms. Installed per manufacturer’s recommendations.[Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-350Madewell Products CorporationJon Steele770-475-819912/01/1998Madewell 927 Penetrating Epoxy Primer/Sealer and Madewell 1103 Epoxy Coal Tar CoatingMinimum of 31 mils thickness over concrete or steel substrateEQ-357International Paint Co. LLC (Formerly Industrial Environmental Coating)Curtis HarveyBenny Carter404-433-7563229-247-024012/17/1998Enviroline? 376F (Enviroline 376F Epoxy Coating)Minimum of 30 mils thickness over concrete or steel substrate, and for internal lining of aboveground storage tanks in accordance API 653.EQ-362Specialty Products, Inc.Chas Weatherford800-627-07732/19/1999Polyshield SS-100 CoatingMinimum of 80 mils thickness over concrete, steel, or geofabric textile substrate EQ-390International Paint Co. LLC (Formerly Ceilcote Corrosion Control,Division of KCH Curtis HarveyBenny Carter404-433-7563229-247-02408/30/1999Ceilcote Crack Bridging Linings (Flakeline and Ceiline 40 Coating Systems)Ceiline BC Coating System with a minimum of 45 mils thickness over concrete, and for Flakeline Coating Systems with a minimum of 45 mils thickness over concrete.EQ-412Rust-Oleum CorporationRick Braunshausen847-816-226412/22/1999Overkote? Concrete Protective System?Minimum of 30 mils thickness over concreteEQ-415Vernon PlasticsRoxanne Smith978-373-155112/22/1999“Vernoguard? OR” and “Vernoguard? PR” synthetic linersMinimum of 30 mils thickness over concrete or earthen substrate[Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-420Tnemec Company, Inc.Gene Ponder407-322-124312/20/2000Tnemec Coating 61, 120, and 201* Systems *System 201 was updated August 2012Tnemec Coating 201 System is applied with a minimum of 42 mils thickness over concrete and the Tnemec Coating 61, and 120 System are applied with a minimum of 30 mils thickness over concrete.EQ-426Pipeline Energy (Formerly C.T. Petroleum Contractors, Inc.)Chuck Strickland386-292-23063/16/2000Retro-Liner Containment SystemRetro-Liner Containment System is applied with a minimum of 125 mils thickness over concrete.EQ-428Thermal-Chem CorporationAlbert Grennsburg800-635-37733/16/2000Thermal-Chem Containment SystemThe Thermal-Chem Containment System is applied with a minimum of 30 mils thickness over concrete for non-traffic bearing areas and 60 mils thickness over concrete for traffic bearing areas.EQ-438General PolymersRobert Johnson813-968-96305/08/2000EPO-FLEX 85 CR system, SEWER-FLEX system, COR-CAST RM & MRM reinforced lining systems, COR-COTE C unreinforced coating and lining system, COR-COTE FC & TF flake reinforced system, and COR-CAST L reinforced lining systemThe EPO-FLEX 85 CR system, SEWER-FLEX system, COR-COTE C unreinforced coating and lining system, COR-COTE FC & TF flake reinforced system, and COR-CAST L reinforced lining system must be applied with a minimum of 30 mils thickness over concrete areas. The COR-CAST RM & MRM reinforced lining systems must be applied with a minimum of 65 mils thickness over concrete areas.[Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-442Belzona, Inc.Kevin McGinley305-594-49947/24/2000Belzona? 5811 (Immersion Grade) secondary containment coatingThe Belzona? 5811 (Immersion Grade) secondary containment coating must be applied with a minimum of 30 mils thickness over concrete or steel areas. EQ-447Benjamin Moore & Co.Todd Bulgrin800-216-9658Ext. 50288/31/2000All Season Epoxy Mastic Coating X10 secondary containment coatingThe All Season Epoxy Mastic Coating X10 secondary containment coating must be applied with a minimum of 30 mils thickness over concrete or steel areas. EQ-448PPG Industries (Formerly Porter Coatings)Mike Eady863-859-92978/31/2000PorterGlaze 4721 Flexible Epoxy Coating secondary containment coatingThe PorterGlaze 4721 Flexible Epoxy Coating secondary containment coating must be applied with a minimum of 30 mils thickness over concrete or steel areas. EQ-449JBT & Associates, Inc.Michael Whitener239-275-62359/08/2000REA 303 Polyurea Spray Elastomer secondary containment coating systemThe REA 303 Polyurea Spray Elastomer secondary containment coating system must be applied with a minimum of 80 mils thickness over concrete, steel, or earthen substrate areas.EQ-455PPG Industries (Formerly Porter Coatings)Mike Eady863-859-92979/26/2000PPG Pitt Guard Rapid Coat DTR 95245 (Formerly PorterMastic? 7000) Surface Tolerant Epoxy Coating secondary containment coatingThe PPG Pitt Guard Rapid Coat DTR 95245 (Formerly PorterMastic? 7000) Surface Tolerant Epoxy Coating secondary containment coating must be applied with a minimum of 30 mils thickness over concrete or steel areas. [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-457DUROMAR, Inc.Daniel Toft813-205-202010/04/2000Updated 4/27/2015HPL 1110, HPL 2221, HPL 3320, HPL 4310, and DF-1301 (previously named HPL 1301) DUROMAR concrete secondary containment protection systemsInitially, the concrete sealer DF-1301 (previously named HPL 1301) is applied with a thin film (5-10 mil thickness). Then, the topcoat HPL 1110, HPL 2221, or HPL 3320 must be applied with a minimum of 30 mils thickness or, HPL 4310 with a minimum of 40 mils thickness over concrete areas. EQ-472MRC, Inc.Howard Golden888-276-140012/22/2000Marseal 2000 and 4000 secondary containment sheet membrane liningThe Marseal 4000 secondary containment sheet membrane lining must be applied with a minimum of 90 mils thickness over concrete or steel areas and the Marseal 2000 secondary containment sheet membrane lining must be applied with a minimum of 60 mils thickness over earthen substrate.EQ-476International Coating, Inc.Michael Kramer800-624-89192/09/2001ICO Floor Coating, ICO Guard Coating, ICO Hi Guard Coating, and ICO Super Guard CoatingThe ICO Floor Coating, ICO Guard Coating, ICO Hi Guard Coating, and ICO Super Guard Coating must be applied with a minimum of 60 mils thickness. In addition, these coatings must be applied with a minimum of 250 mils thickness over concrete or steel in heavy traffic areas. [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-477International Paint Co. LLC (Formerly ICI Devoe Coating)Curtis HarveyBenny Carter404-433-7563229-247-02402/09/2001Devran? 124 Epoxy System with optional Enviroline 9450 Caulk (Pre-Prime? 167 and Devran? 124 epoxy coating)The (Pre-Prime? 167 and) Devran? 124 epoxy coatings must be applied with a minimum of 30 mils thickness over concrete areas.EQ-509Richard’s Paint Manufacturing Co., Inc.James Peterson321-636-620011/02/2001Richard’s 2200 Polyamide epoxy coatingThe Richard’s 2200 Polyamide epoxy coating must be applied with a minimum of 30 mils thickness over concrete areas.EQ-510Dudick, Inc.Thomas Parenete800-322-197011/02/2001Protecto-Coat PS, Caulk PSC, Protecto-Coat 800, Protecto-Flex 100XT, and Protecto-Glass 160XT coatingsThe Protecto-Coat PS and the Protecto-Coat 800 coating must be applied with a minimum of 40 mils thickness over concrete areas. The Protecto-Coat 100XT coating must be applied with a minimum of 100 mils thickness over concrete areas. The Protecto-Glass 160XT coating must be applied with a minimum of 90 mils thickness over concrete areas. The Caulk PSC can be used on joints or cover cracks up to 2 inches wide at a minimum of 125 mils on concrete surfaces or on the tank chimes.[Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-512The Sherwin Williams CompanyWilliam Fite407-658-987512/14/2001DEP-01 coatings, consisting of the COROBOND 100 epoxy primer/sealer Number B58WQ5100/ B60VQ5100, the KEM CATI-COAT HS epoxy filler/sealer Number B42W400/B42V400, and the SHELLCOTE II Epoxy Amine, Number 920-W-355/700-C-764The DEP-01 coatings must be applied with a minimum of 30 mils thickness over concrete areas. The Department’s previous approval EQ-170, dated April 29, 1994, is no longer in effect.EQ-531The Sherwin Williams CompanyWilliam Fite407-658-98755/14/2002General Polymer Envirolastic AR 425 Polyurea CoatingThe coating must be applied with a minimum of 40 mils thickness over concrete areas. EQ-534Madison Chemical Industries, Inc.Ron Chunko770-339-78587/03/2002Flexcell II, Flexcell II TX, EC-120, and Corrocote Plus w/ Acr 85 top coatingThe Flexcell, Flexcell II TX, EC-120 applied with a minimum of 40 mils thickness over concrete areas, Corrocote plus w/ Acr 85 topcoat must be applied with a minimum of 30 mils thickness over steel areas.EQ-541Freecom, Inc.Kevin Freeman915-263-84979/23/2002Ceram-Kote SPG22 CoatingThe Ceram-Kote SPG22 coating must be applied with a minimum of 30 mils thickness over concrete areas.EQ-559Mobil Paint Mfg. Co., Inc.Mark Mann251-443-6110Ext. 2296/23/2003MoPoxY? Pre-Prep sealer, Clear, 41-AF-2 and MoPoxY? Mastic Epoxy Coating, Down Gray, 40-AH-51The MoPoxY? Pre-Prep sealer, Clear, 41-AF-2 and MoPoxY? Mastic Epoxy Coating, Down Gray,40-AH-51 must be applied with a total minimum of 30 mils thickness over steel or concrete areas. [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-560GSE Lining Technology, Inc.Nathan Ivy800-435-20087/25/2003GSE HD LinerThe GSE HD Liner must be applied with a minimum of 60mils thickness over earthen substrate. The Department Final Orders EQ-006 issued on April 21, 1991, and EQ-008 issued on May 30, 1991 are no longer in effect.EQ-564GSE Lining Technology, Inc.Kristen Hardin800-435-20089/26/2003GSE StudlinerThe GSE Studliner must be applied with a minimum of 80 mils thickness over concrete substrate. EQ-592Hempel USA Inc.Shane Prudhomme936-523-60007/23/2004Hempadur Multi-Strength? 35530 Concrete Sump Sealant and the Hempadur? Filler 35250Hemp Hempadur Multi-Strength? 35530 Concrete Sump Sealant must be applied with a total minimum of 30 mils thickness over steel or concrete areas and the Hempadur? Filler 35250 must be applied in accordance with the manufacturer’s recommendations.EQ-599International Paint Co. LLC (Formerly ICI Paint)Curtis HarveyBenny Carter404-433-7563229-247-024010/27/2004International Paint Co – Devoe Bar Rust 236 Multi-Purpose Epoxy Coating (Formerly ICI/Devoe Bar-Rust 236 Multi-Purpose Epoxy Coating)The International Paint Co – Devoe Bar-Rust 236 Multi-Purpose Epoxy Coating must be applied with a total minimum of 30 mils thickness over steel or concrete areas and must be applied in accordance with the manufacturer’s recommendations. [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-603Agru-America, Inc.Paul Barker843-546-060012/16/2004Agru-America HDPE LinerThe Agru-America HDPE Liner must be applied with a minimum of 60 mils thickness over earthen substrate. EQ-608 International Paint Co. LLC (Formerly Carboline Company)Curtis HarveyBenny Carter404-433-7563229-247-02403/02/2005Polibrid? 705 Elastomeric Polyurethane CoatingThe Polibrid? 705 is to be applied directly to concrete and steel surface at 60 – 120+ mils DFT. It can also be used in conjunction with Geotextile Fabric for concrete and earthen dike walls. Must be applied in accordance with the manufacturer’s recommendations.EQ-630Benjamin Moore & Co. (Formerly Coronado Paint Company)Mark Mangan407-385-17171/18/2006 Updated12/18/2013Insl-x Corotech Polyamide Epoxy (Formerly Coronado 101 epoxy with 101-252B high build activator)Insl-x Corotech Polyamide Epoxy must be applied with a minimum of 30 mils thickness over steel or concrete areas and must be applied in accordance with the manufacturer’s recommendations. EQ-643Premier Coating Systems, Inc.Ron Fake904-824-17997/31/2006PCS # 200 Surface Tolerant Epoxy Sealer, and PCS # 1100 Modified Epoxy Novolac Polysulfide CoatingApproved in the State of Florida as a coating for concrete or steel secondary containment of aboveground storage tanks containing kerosene analytical group. The PCS # 200 Surface Tolerant Epoxy Sealer, and PCS # 1100 Modified Epoxy Novolac Polysulfide Coating must be applied with a minimum of 30 mils thickness over steel or concrete areas and must be applied in accordance with the manufacturer’s recommendations. [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-651Polycoat ProductsAshish Dhuldhoya562-802-883410/18/2006Polycoat Polyeuro 552 coatingApproved in the State of Florida as a coating for concrete or steel secondary containment of aboveground storage tanks containing petroleum products. The Polycoat Polyeuro coating must be applied with a minimum of 40 mils thickness over steel or a minimum of 60 mils thickness over concrete areas and must be applied in accordance with the manufacturer’s recommendations. EQ-658Pilgrim Permocoat, Inc.Robert Forlong800-637-33281/25/2007Pilgrim Plastic CoatingThe Pilgrim Plastic coating must be applied with a minimum of 30 mils thickness over steel or over concrete areas and must be applied in accordance with the manufacturer’s recommendations.EQ-678Solmax International Inc.Paul Payeur800-571-39046/27/2007Solmax HDPE and LLDPE LinerApproved in the State of Florida as a liner for secondary containment over earthen substrate. The Solmax HDPE and LLDPE Liner must be applied with a minimum of 60 mils thickness over earthen substrate. [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-686VersaFlex IncorporatedDavid Cerchie913-321-100010/12/2007VersaFlex VF-380 and PV-380 coatingsApproved in the State of Florida as coatings for concrete or steel secondary containment of aboveground storage tanks containing petroleum products. The VersaFlex VF-380 and PV-380 coatings must be applied with a minimum of 40 mils thickness over steel or a minimum of 60 mils thickness over concrete areas and must be applied in accordance with the manufacturer’s recommendations. EQ-693Rhino Linings USABharat Naik858-450-044112/12/2007Rhino Hi Chem and Rhino Extreme coatingsApproved in the State of Florida as coatings for concrete or steel secondary containment of aboveground storage tanks containing petroleum products. The Rhino Hi Chem and Rhino Extreme coatings must be applied with a minimum of 80 mils thickness over steel or concrete areas and must be applied in accordance with the manufacturer’s recommendations.EQ-748Seaman CorporationBill Shehane704-987-00552/17/2010Seaman 1932 PTF polyurethane linerApproved in the State of Florida as a liner for secondary containment over earthen substrate underneath a field -erected tank. The Seaman 1932 PTF Polyurethane liner must be applied with a minimum of 35 mils thickness over earthen substrate. [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-756VersaFlex IncorporatedArt Weiss913-321-90007/22/2010VersaFlex FSS 45DCF coatingApproved in the State of Florida as coatings for concrete or steel secondary containment aboveground storage tanks containing petroleum products. The VersaFlex FSS 45DCF must be applied with a minimum of 80 mils thickness over steel or concrete areas and must be applied in accordance with the manufacturer’s recommendations.EQ-758Rawell Environmental, Ltd.Steven Flynn+44(0) 151-632-577111/10/2010RAWMAT HDB Type P and RAWMAT HDB Type PP Lining SystemApproved in the State of Florida as secondary containment over earthen substrate of a field-erected tank. Installation of the lining system may be installed on embankments with slopes greater than 45 degrees provided that the lining system is anchored in place according to good engineering practices. The Final Order EQ-755 issued on June 17, 2010, has been rescinded.EQ-771Corotech Coatings (Formerly Benjamin Moore & Co.)Guy Schnatter800-225-55546/28/2011Updated: 8/1/2014Corotech? V160 Surface Tolerant Epoxy Mastic (Previously – Super Spec? Epoxy Mastic P45 Coating System for Concrete – Secondary Containment Coating)Application and maintenance shall be according to the manufacturer’s recommendations.EQ-782Specialty Products, Inc.Chas Weatherford800-627-07733/16/2012Specialty Products, Inc. Coatings: Polyprime-100? Primer, PTU?, PTU-AR?, Polyshield HT-SL?, K5?, Watersafe II? and HT-100F UB?All products are approved in the State of Florida as base coats or sealants that may be applied to either aboveground or underground storage tank secondary containment systems according to manufacturer’s recommendations.[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-789 (System 1)Carboline CompanyMatt Williams251-300-15977/06/2012Carboline Company Protective Coatings and Linings: System #1: Primer – Carboguard 1340WB and Finish – Reactamine ETSystem #1 may be used as approved coatings for concrete or steel substrate secondary containment systems for AST systems. Surface prep, chemical compatibility and application procedures shall be according to the manufacturer’s recommendations. Primer applied at min. 1.5-2.0 mils DFT and Finish applied at min. 40.0 mils DFT.EQ-789 (System 2)Carboline CompanyMatt Williams251-300-15977/06/2012Carboline Company Protective Coatings and Linings: System #2: Primer – Semstone 110 and Finish – Semstone 140System #2 may be used as approved coatings for concrete or steel substrate secondary containment systems for AST systems. Surface prep, chemical compatibility and application procedures shall be according to the manufacturer’s recommendations. Primer applied at min. 5.0-6.0 mils and Finish applied at min. 30.0 mils DFT.EQ-790New Life CoatingsKen Barton863-438-87837/06/2012NLC-101S Epoxy Spray SystemApproved as a protective coating for concrete secondary containment systems for AST systems. Surface prep, chemical compatibility and application shall be according to the manufacturer’s recommendations.EQ-793Epoxytec Michael Caputi877-463-769910/24/2012Uroflex? (UME38) Part A & Part B Coating SystemApproved for concrete or steel secondary containment components. Surface prep and application thickness shall be in accordance with manufacturer’s recommendations.Coatings AST/UST Synthetic or Concrete (Continued) [Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-796Stephen’s Technologies, Inc.Ken Barton888-783-743611/06/2012Newlife Liner Epoxy Lamination SystemApproved coating system for secondary containment components and meets the compatibility requirements with the pollutant stored in the AST. Surface prep and application thickness shall be in accordance with manufacturer’s recommendations.EQ-800AET ComplianceJason Wiles800-989-82981/30/2013Tanks and Pipeworks Ltd. Try-Line System for Underground Storage Tanks – 100% of tank is provided with interstice monitoring installed with either class 1 or class 2 detection systemsA lining system for USTs containing petroleum, petroleum products and ethanol up to E-85 and a release detection system for the Try-Line System. Only Tanks and Pipeworks Ltd. Trained personnel can perform installation and must be according to manufacturer’s protocol.EQ-802Corrocoat USA, Inc.Josh Tankersley904-268-45592/19/2013Corrocoat Limited Zipcoat & Polyglass VEF Coating for Sulfuric Acid Secondary Containment and AR3 Coating for Sulfuric Acid Secondary ContainmentApproved coatings to be applied to concrete or metallic secondary containment associated with USTs or ASTs. The surface prep and application thickness shall be made in accordance with manufacturer’s recommendations.EQ-811Industrial Maintenance Group, Inc.Pete Van Fossen800-627-07737/22/2013Patented Polyseam? Coating, SC-3900-F-UB Coating, and CR-3000-F CoatingApproved as coatings or sealants of secondary containment for storage tank systems. The installation and operation shall be made in accordance with the manufacturer’s recommendations.EQ-812HEMPLE (USA) Inc.Teresa Valdes936-523-60007/29/2013HEMPLE (USA) Inc. – Blome CP-83MP Epoxy Adhesive, Blome EC-66, Blome EC-90, Blome EC-R590, Blome Primer 75, and Blome TL-47-S CoatingsApproved as coatings or sealants of secondary containment for storage tank systems. The installation and operation shall be made in accordance with the manufacturer’s recommendations.[Back to Categories]Coatings AST/UST Synthetic or Concrete (Continued) File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-822Corrocoat USA, Inc.Julie S. Forte904-268-40003/24/2014Corrocoat USA, Inc., Corroglass AR4 CoatingMay be used as a lining material for concrete or steel secondary containment systems associated with USTs and ASTsEQ-830Epps Decorating CenterScott Epps850-385-66499/19/2014Benjamin Moore Super Spec? Epoxy Mastic P45 and The Corotech Coatings Surface Tolerant Epoxy Mastic Coating V160Surface preparation and application procedures shall be made in accordance with the manufacturer’s recommendations.EQ-833Enecon CorporationElizabeth Kessler888-436-326612/23/2014CHEMCLAD-P4C Primer and CHEMCLAD SC Polymer CoatingCan be used on concrete or metallic surfaces. 100% solid polymer coating for tanks and secondary containment systemsEQ-835ArmorThane USA, Inc.Hank Strathman417-831-509012/23/2014EnviroThane Polyurea CoatingSurface preparation and application procedures shall be made in accordance with the manufacturer’s recommendations.EQ-841Corrocoat USA, Inc.Peter Smyth904-268-45593/23/2015Corrocoat Zip-E CoatingThe Corrocoat Zip-E Coating may be used as a protective coating system for concrete or metallic secondary containment systems associated with aboveground storage tank systems storing ammonia, petroleum lubricants and Fyrquel EHC (a fire-resistant hydraulic fluid).EQ-842Sika Corporation, Pecora Corporation and De Neef Construction Chemicals, Inc.Nora Ervolino772-597-76425/15/2015Sika Corporation: Sikafloor? 161 primer, Sikafloor? 700 Coating, and Sikafloor? 340 aliphatic urethane, the Pecora Corporation: Pecora P-53-VOC primer, and Synthacalk? GC2+ sealant, Prime Resins, Inc.: Prime Flex? 900 MV foam injection resin and the De Neef Construction Chemicals, Inc. Dry Oakum jute oakum crack fillerThe Sika Corporation, the Pecora Corporation, Prime Resins, Inc. and the De Neef Construction Chemicals, Inc. products may be used as a primer, a protective coating system or materials for filling cracks for secondary containment systems associated with aboveground storage tank systems.Coatings AST/UST Synthetic or Concrete (Continued) File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-846Total Containment Solutions, Inc.Sherry Currie239-275-62355/15/2015Total Containment Solutions, Inc.: TCS 380-25 and TCS 380-CL Polyurea Spray Elastomer Systems for Secondary Containment CoatingThe coating must be installed in accordance with the manufacturer recommendations for surface preparation, application, and maintenance.EQ-847Enecon CorporationElizabeth Kessler888-436-32665/15/2015Enecon Corporation’s CHEMCLAD XC, ENCRETE-DuraQuartz and ENCRETE-DuraFill CoatingsThe Enecon Corporation’s CHEMCLAD XC, ENCRETE-DuraQuartz and ENCRETE-DuraFill Coatings may be used as surface coating for tanks and secondary containment systems associated with aboveground or underground storage tank systems.EQ-852CETCOMichael Rublaitus800-527-994810/23/2015CETCO Geosynthetic Clay Liners, Bentomat and Claymax SystemsSee Conditions (a) through (g) on the Approval OrderEQ-853Raptor USA, LLCRyan Richetti844-727-867810/23/2015Raptor-CO/SC Secondary Containment CoatingThe surface preparation of the concrete and the application of the coating shall be made in accordance with the manufacturer’s recommendations.EQ-880Tank Tech, Inc.Jonathon McNeely888-405-23697/24/2017Tank Tech, Inc., UL 1856 FRP Lining SystemInstaller must be a Tank Tech, Inc. approved technician, and if the Braddock Method is used for testing, a Tank Tech Technician must be used, and the interstitial integrity test must be performed in accordance with manufacturer’s instructions.EQ-910Volatile Free, Inc.Mike Sullivan262-787-040012/5/2018VFI-200 Polyurea Plural Component Spray Coating for concrete surfacesSurface preparation and application procedures for concrete shall be made in accordance with Exhibit A.[Back to Categories]Leak Detection Equipment – Sensors, Alarms and Control PanelsLeak Detection/ Vapor DetectorFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-039Mine Safety AppliancesBill Freeman800-672-46789/05/1991TankgardEQ-054Teledyne GeoTech CorporationMike Martin512-327-98401/14/1992Lasp Monitor SystemEQ-063HNU System, Inc.Albert Wilshire617-694-66902/20/1992Model DL-101EQ-066HNU System, Inc.Albert Wilshire617-694-66903/16/1992Model PI-101EQ-067HNU System, Inc.Albert Wilshire617-694-66903/17/1992Model HW-101EQ-089Campo Miller, Inc.Mary Filippi209-781-68629/01/1992VS-200EQ-101Arizona InstrumentsTerry Kiss800-528-741112/08/1992Sentry 12XEQ-106OPW (Formerly Petro Vend, Inc.)Gene Pope813-969-190012/08/1992Site SentinelEQ-185FCI Environmental, Inc.Dan Wien800-363-98921/10/1995AHP 100 Vapor SensorEQ-248OPW Fuel Management Systems (Formerly Petro Vend, Inc.)Gene Pope813-969-19004/12/1996Petro vend Model TLD III Vapor SensorEQ-902Simplex, Inc.David Hurtado386-690-63619/20/2018Tank Alarm Panel Simplex Tank Commander TC-8 – Used to Monitors High Level, Low Level and Tank Leak Alarms The tank alarm panel is to be used with leak detection sensor Pneumercator LS 600, approved under EQ-240. The installation, operation, testing and maintenance procedures shall be made in accordance with the manufacturer’s recommendations[Back to Categories]Leak Detection/ Liquid DetectorFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-044In-Situ, Inc.William Mann307-742-82139/17/1991KW-140/KW 240EQ-057Pneumercator Co, Inc.Jonathan Levy800-209-78581/13/1992Pneumercator LDE 9000EQ-091PermAlertCorey Hill847-966-2235 9/29/1992Updated7/12/2019PAL-AT Leak Detection System. Model Numbers AT30C, AT30K, AT75CInstallation and operation shall be in accordance with the manufacturer’s recommendations.EQ-100Mallory Controls, Inc.Mark Becker317-328-402011/03/1992Pollulert Probe FD 241REQ-110Mallory Controls, Inc.Mark Becker317-328-40202/18/1993Pollulert Probe FD 221GEQ-119Tidel Engineering, Inc.David Tucker800-678-75774/05/1993EMS-3500EQ-128Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79425/10/1993CEI 3000EQ-136Arizona Instruments CorporationTerry Kiss800-528-74117/12/1993Liquid 330EQ-147Pneumercator CompanyJonathon Levy631-293-845010/13/1993Pneumercator Probes 9-901, 9-902, 9-903EQ-159One Plus, Inc.Gene Forman708-498-09552/04/1994Leak EdgeEQ-161Franklin Fueling SystemsDan Marston207-283-01563/14/1994Liquid Sensors, LS-3A N.C., LS-3A N.O., LS-30A, and LS-7EQ-164Southeast Tank CompanyDavid Palazzo813-986-10433/11/1994Perma TelEQ-168Raychem CorporationTerry Warren901-382-47617/07/1994TraceTek Leak Detection Systems with TT5000 (fuel) Sensors for use with TTG, TTDM-PLUS, TTA, TTC, and TT-Sim Control Modules[Back to Categories]Leak Detection/ Liquid Detector (continued)File pany NameContactTelephoneApproval dateProduct’s NameCondition(s)EQ-177FCI Environmental, Inc.Dan Wien800-363-96829/01/1994AHP 100, and DHP 100 Liquid sensorsEQ-197Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79425/03/1995TLS-250, TLS-250i, TLS-350,TLS-350R, ILS-250, ILS-250i,and ILS-350, EMC Enhanced, EMC w/BIREQ-202Arizona Instrument CorporationTerry Kiss800-528-74115/12/1995TLS-830EQ-216Beadreau Electronic, Inc. Jim Goodman203-443-65709/21/1995Model 406 Pump Cut-offEQ-240Pneumercator Co., Inc.Jonathon Levy800-209-78582/24/1996Pneumercator LS 600, LS 601, and RSU 800 See EQ-706 & EQ-732 under AST Overfill ProtectionEQ-247OPW ( Formerly Petro Vend, Inc.)Gene Pope813-969-19004/12/1996Petro Sentry and Site Sentinel Groundwater SensorEQ-263Ronan Engineering CompanyTodd Stewart800-327-66268/14/1996Liquid Sensors LS-3N.C., LS-3.N.O., LS-7, LS-30, and HAV(mini sensor)EQ-269Pneumercator Co., Inc.Jonathon Levy800-209-785811/26/1996Pneumercator ES825-100-F, and ES825-200-F (Formerly Pneumercator ES820-100, and ES820-200)EQ-286AC-DC Services, Inc.David Langdon813-823-68595/07/1997DISC-1EQ-304OPW Fueling Containment Systems (Formerly Environ Products, Inc.)Gene Pope813-969-190012/11/1997LDS SystemEQ-316Warrick Controls, Inc. Lawrence Tripp800-378-16001/28/1998DLP-2-NC, DLP-2-NO SensorsEQ-319Pneumercator Company, Inc.Jonathon Levy631-293-84502/17/1998Pneumercator LC 1000EQ-320Raychem CorporationTerry Warren901-382-47614/03/1998Sensor Comm Model TLD 5000 with Raychem Model TT5000 Fuel Sensing Cable[Back to Categories]Leak Detection/ Liquid Detector (continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-391Omntec Mfg., Inc.Tom D’Alessandro516-467-57878/30/1999L-R-1, LS-ASC, PDS, PDWS, PDWF, and LWF sensors, when used with associated controllers LPD, LU, and OEL8000The Department’s previous approval of EQ-137, dated July 20, 1993, is hereby revoked. The new documentation submitted to the Department in the recent equipment approval request supersedes the conditions of the previous approval.EQ-407Beaudreau Electronics, Inc.Stephen Bessette560-599-3100Ext. 22312/14/1999Model 510 and 516 Discriminating Sump SensorsEQ-416Titan Tank Company of FloridaDavid Palazzo813-986-79961/03/2000Permatel/Titan tank Leak Detection SystemEQ-425Eco-Tank Systems, Inc.Tom Keefer610-495-958312/25/2000ECO-TANK TABS 01 leak detection systemLiquid interstitial release detection system for double-bottom aboveground tanks.EQ-443Simmons Corporation (Formerly Caldwell Systems Corporation)Howard Dockery800-848-83787/25/2000Tank Manager Liquid DetectorEQ-456Intelligent Controls, Inc.Kevin Devinney207-283-015610/04/2000HIS, HLS, ULS, DIS, EIS, PS, DDS, DTS, and MWS interstitial liquid sensorsEQ-467Preferred Utilities MFG. Corp.Peter Lavelle203-743-674111/29/2000TG-EL-D3 Leak Detection SystemEQ-499Omntec Mfg., Inc.Tara Traganas631-981-20017/30/2001OEL 8000 II and K-OEL 8000 II Controller with BX Series SensorsEQ-516OPW ( Formerly Tuthill Transfer Systems and the Emco Electronics Division)Gene Pope813-969-19002/18/2002EECO System Liquid Sensors Models Q0001-005, Q0003-001, Q0003-002, Q0003-003, Q0003-104/154/204, Q0003-005, Q0003-006, and Q0003-009The Department’s previous approvals EQ-072, dated May 19, 1992, and EQ-194 dated March 1, 1995, are no longer in effect.[Back to Categories] Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-519Pneumercator Co., and Phoenix Products, Inc.Jonathon Levy800-209-78582/20/2002Pneumercator E-700-1, LDE-700, and Phoenix Midg-It Tank Gauging Leak Detection SystemsEQ-570 Robertshaw Industrial ProductsDave Cahill865-981-311312/22/2003Centeron Level Alarm SystemEQ-586Beaudreau Electronic, Inc.Stephen Bessette560-599-3100Ext. 2235/07/2004Model EOS 100 Discriminating Sensor and Model 522 and 522Tmonitoring SystemEQ-589Pneumercator Co., Inc.Jonathan Levy800-209-78587/12/2004LDE 740 with level sensor models LS600AB, LS600LDBN, LS610, RSU800, and with sensor probe 9-901, 9-902, 9-903EQ-596Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-794210/18/2004Veeder-Root Mag Sensor Model 857080-xxx for use with Veeder-Root TLS-350 or EMC ConsolesEQ-598Western Fiberglass, Inc.Mike Lewis707-523-205010/28/2004Co-Flow? Hydraulic Coaxial Monitoring System for the Western Fiberglass Co-Flex #34C9 Piping SystemConditional ApprovalEQ-607SGBJost Berg49(0)271-48964403/01/2005Vacuum Leak Detection System Models VL 30P, VL 350P, and VL 400PConditional ApprovalEQ-614Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79428/31/2005Veeder-Root Sensors Model 794380-3xx, 794390-4xx, and 7943980-2xx for use with Veeder-Root TLS-300 Series Consoles, EMC Basics and ProPlus Series ConsolesEQ-628Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79421/17/2006Veeder-Root Mag Sensor Hydrostatic Test, and Secondary Containment Vacuum Sensing SystemConditional Approval[Back to Categories] Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-641International Supply CompanySteve Gelling309-249-62116/23/2006ISCO-100 Rupture Basin Float SensorApproved for Interstitial MonitoringEQ-645WorldTelemetry , Inc.Jennifer Corser918-232-74197/31/2006World Telemetry’s Liquid Sump sensor, Model # TSF-0001Approved for Interstitial MonitoringEQ-657Industrial HeaterTerry Warren901-382-47611/24/2007TTS-FFS TraceTek Fast Fuel Sensor & TraceTek TT BFA PanelApproved for Interstitial MonitoringEQ-675Krueger Sentry Gauge Co. Inc.Lee Geurtus920-434-88606/12/2007AT-A-GLANCE Leak Gauge Type KApproved for interstitial monitoring of shop-fabricated aboveground storage tanks in the State of Florida. EQ-676Veeder-RootTech SupportCustomer Svc800-323-1799888-561-79426/14/2007Stand-Alone Dispenser Pan Sensor 847990-001 and Differentiating Stand-Alone Dispenser Pan Sensor 847990-002 with Dispenser Control InterfaceApproved for interstitial monitoring of dispenser liners in the State of Florida.EQ-682Madison CompanySteven Hilaire203-488-4477Ext. 1019/16/2007M7000 Vertical Mount, Single Point Level Switch, PBT Stem & Buna N Float, SPST 30VA Switch, M7700 Horizontal Mount, Single Point Level Switch, PBT Stem & Float, SPST 30VA Switch, M8700 Horizontal Mount, Single Point Level Switch, Polypropylene Stem and Float, SPST 30VA SwitchConditional ApprovalEQ-689Omntec Mfg., Inc.Tara Traganas631-981-200111/05/2007Omntec L-R-1, LS, LS-ASC, PDS, PDWF sensors when used with associated controllers LPD, LU and OEL 8000The systems must be tested upon installation, and at least once on annual basis in accordance with Exhibit A, and Exhibit B, for Rule 2-762.701, F.A.C., annual operability requirements.EQ-704Franklin Fueling SystemsAllan Busch608-838-87864/17/2008Franklin Fueling Systems Phil-Tite Model 40X-FS-XPR-Gray with TS-ULS sensor universal liquid sensor, UL File no. MH21091.See also EQ-704 under UST/Spill Containment DevicesThe system is tested in accordance with Exhibit A prior to being placed into service and the sensor is tested annually and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-706Simplex, Inc.David Hurtado386-690-63615/08/2008See EQ-706 under AST Overfill ProtectionAlso see EQ-240 under this categoryLeak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-714Greenleaf GaugeBrad Holton888-884-28438/18/2008Greenleaf Gauge Model EFG-8000 Overfill ProtectionA copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the state of FLEQ-720OPWGene Pope813-969-190012/17/2008OPW iSite tank monitoring sensor system, Model Number 30-3233-12, 30-3233-24, 30+0232-DH-10, 30-0232-20, 30-0236-LW, 30-0234-HW-01, 30-0231-S,30-0230-S, 30-0232-D-10, 30-0232-D-20, 30-D-10B,30-0232-D-20B, and 30-235-VApproved for interstitial monitoring in the State of Florida. The systems must be tested upon installation, and at least once on annual basis in accordance with Exhibit A, for Rule 62-761.700, F.A.C., annual operability requirements and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-724Veeder-RootTech SupportCustomer Svc800-323-1799888-561-794212/24/2008Veeder-Root TLS-450 tank monitoring sensor system, Model Number 794380-208, 794380-209, 794380-303, 79380-320, 794380-322, 794380-323, 794380-343, 794380-344, 794380-345, 794380-350, 794380-351, 794380-352, 794390-401, 794380-430, 857060-xxx, 857080-xxx, and 86009x-xxxApproved for interstitial monitoring in the State of Florida. The systems must be tested upon installation, and at least once on annual basis in accordance with Exhibit A, for Rule 62-761.700, F.A.C., annual operability requirements and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-732Simplex, Inc.David Hurtado386-690-63615/11/2009See EQ-732 under AST Overfill ProtectionAlso see EQ-240 under this categoryEQ-769Industrial HeaterTerry Warren901-382-47616/15/2011TraceTek – TT5000-HUV Fuel Sensing Cable for Leak Detection for Aboveground Storage Tanks, Aboveground Piping, Piping Sumps and Dispenser Liners & TraceTek TT BFA PanelInstallation and operation shall be in accordance with the manufacturer’s recommendations.[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-773PCE Petroleum Contractors EnterpriseRaul (Nick) Necoechea407-342-13857/28/2011PCE Tank D/W Containment Interstitial Monitoring System for Lined Tanks – wet or dry interstitial monitoring of lined USTsThe release detection methodology for the interstice shall be according to the manufacturer’s recommendations. May be used for wet or dry interstitial monitoring of lined USTs.EQ-780Preferred Utilities MFG. Corp.Dexter Bullard203-743-67412/14/2012Tank Fil-A-Larm Switch Model SDI-HLS; Tank Gauge Model SDI-TG-EL-D5; Discriminating Sensor Models SDI-HD-A2-C & SDI-HD-A2-C-8All products are approved as either overfill protection or release detection devices associated with ASTs or USTs. Installation and operation shall be made in accordance with the manufacturer’s recommendations. EQ-800AET ComplianceJason Wiles800-989-82981/30/2013Tanks and Pipeworks Ltd. Try-Line System for Underground Storage Tanks – 100% of tank is provided with interstice monitoring installed with either class 1 or class 2 detection systemsA lining system for USTs containing petroleum, petroleum products and ethanol up to E-85 and a release detection system for the Try-Line System. Only Tanks and Pipeworks Ltd. Trained personnel can perform installation and must be according to manufacturer’s protocol.Leak Detection/ Liquid Detector (Continued)[Back to Categories]Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-807Mott-Smith Consulting Group, LLCMarshall Mott-Smith850-391-98354/18/2013Husky Corporation 007 product line; Jarhead product line; Leak Guard product line; Black Knight product line; Red Fox product line and Sentry product line for Aboveground Storage Tank SystemsApproved in the State of Florida as product level sensors that could provide high level information for overfill protection and for product inventory information for AST systems. Intended to be used with medium and heavy distillates and not intended for use with light distillates such as unleaded gasoline. The installation and operation shall be in accordance with the manufacturer’s recommendations.EQ-817FPI Sensors LLCCustomer Service972-241-2161CustomerService@ 1/13/2014Updated9/27/2019FPI Sensors International Model Numbers: LD 1001 Generic Leak Detection System – LD FPI BB15; CL 1001 Generic Continuous Level 4-20 mA Sensor – LD FPI SP15; LS 1001 Generic Level Float Switch – LD FPI SP12Release detection sensors for monitoring secondary containment systems associated with USTs and ASTs and for an associated float switch associated with the sensors. EQ-817 covers overfill protection devices when connected to an operator alarm.EQ-843Talon Industries, Inc.Clyde Williamson817-265-55113/23/2015TraceTek LDS_LS-3 Float Sensor and TraceTek TTDM-128 Leak Detection Master ModuleEither a product or liquid release detection sensor may be used as the TraceTek LDS_LS-3 Sensor within the interstice of secondary containment associated with underground or aboveground storage tank systems. The TraceTek LDS_LS-3 Sensor must be placed at the low point of the secondary containment system being monitored.Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-854Fuelogic, LLC(Parent Company Design By Initiative)Reid McLean404-996-128211/09/2015SMD Fluid ControlsFuelogic Model FS and Models FM Float Switches for Overfill Protection and Release DetectionMay be used as part of an overfill protection device or a release detection sensor for underground and aboveground storage tank systems. The installation, operation, and maintenance procedures shall be made in accordance with the manufacturer’s recommendations.EQ-862Morrison Brothers Co.Jerry Schollmeyer800-553-48402/01/2016Morrison Brothers Co. Model 924 & 924S, 924LS, 925 & 925S Series Liquid SensorsThe installation and maintenance shall be made in accordance with the manufacturer’s recommendations.EQ-863Pope & Associates, Inc.Gene Pope813-969-1900 3/04/2016OPW SiteSentinel?Nano? Console Tank Gauge, Probes and SensorsMay be used as an automatic tank gauge, as an approved overfill protection device when equipped with an alarm, and as an interstitial release detection device for secondary containment systems for underground and aboveground storage tank systems.EQ-867Solutions with Innovation, LLCThomas Williams203-729-64346/27/2016L170-0101-3002 and L007-0402-0203 Series Liquid Level SwitchesFor overfill protection, the switch will be set at a specified liquid level in the storage tank and an alarm will be provided to the transfer operator. For interstitial release detection, the switch will be placed on the low area of the secondary containment interstice that is being monitored that will alarm when liquid is detected.[Back to Categories]Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-868Morrison Brothers Co.Jerry Schollmeyer800-553-484012/16/2016Models 918SB, 918DB, and 918QB Series AlarmsMay be used as a visible and audible alarm for overfill protection devices or release detection sensors for aboveground and underground storage tank systems, in accordance with the requirements of Chapter 62-761, and Chapter 62-762, F.A.C.EQ-871Solutions with Innovation, LLCRobert Budnik203-729-64341/25/2017Models L312, L312E, L500 and L500E Series Liquid Level SwitchesFollow manufacturer’s recommendations.EQ-872Morrison Brothers Co.Jerry Schollmeyer800-553-48403/06/2017Models 1218C Console & 1218S SensorFollow manufacturer’s instructions.EQ-892Franklin Fueling SystemsSandra Adams608-838-56683/28/2018Franklin Fueling Systems INCON? Brand TS-STS Sump Test System – consists of T750 ATG and up to 4 Franklin Fueling Systems TSP-LL2 Magnetostrictive probes. (Previous related registrations include EQ-327, EQ-337 and EQ-679)For use with UST systems. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-893Endress+HauserDean Mallon317-530-18204/02/2018Endress+Hauser FTL5x-xx Level SwitchFor use with UST and AST systems as liquid detector and overfill protection. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.[Back to Categories]Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-897Flowline IncorporatedAdrian TottenJesus Aureoles862-598-3015 919-656-54025/31/2018Flowline Echopulse & Echopro Pulse Radar – Model Numbers: LR10, LR11, LR15, LR16, LR20, LR21, LR25, LR26, LR30, LR31For use with UST and AST systems as liquid detector and overfill protection. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-901Rochester Gauges LLCCustomerService@972-241-21619/11/2018Updated4/9/2020Rochester Gauge Magnetic Liquid-Level Gauge Model Numbers: 6560, 6580, 8660, and 8680For use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-905Meco, Inc.Renee Mroz-Powell619-466-146910/25/2018Meco, Inc. AST Overfill Alarm and Interstitial or Secondary Containment AlarmFor use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-914Gizmo EngineeringPeter Blokhuis585-301-09701/25/2019Tank Level Alarm and Alarm Box. Models IS-AB and IS-TFor use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-917Pneumercator Co., Inc.Jonathan Levy631-293-84506/03/2019LC2000 Series Leak/Point-Level Alarm Console – used with the following Pneumercator leak sensor models: ES825-100F/XF/CF, ES825-200F/XF, LS600LDxx Series, LS610, RSU80x Series, RSU810; and with the following Point-Level Overfill sensors: LS600 SeriesFor use with both USTs and ASTs. The installation must be inspected and started up by a Pneumercator-certified technician. Testing and maintenance shall be made in accordance with the manufacturer’s requirements.[Back to Categories]Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-920ifm efector, inc.Josh Schaus610-524-280810/15/2019LR2050 Level transmitter. All applications require a probe of customer specified length.Probe part numbers: E43203-E43210, E43225-E43227, E43337, E43351-E43353 For oil-based liquids, coax accessory of length matching probe is required. Coax tube part numbers: E43211-E43230, E43333-E43336, E43354-E43356, E43378For use with AST systems storing diesel fuel. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-923ifm efector, inc.Josh Schaus610-524-280811/25/2019PS3208 Submersible Level TransmitterFor use with AST systems storing diesel fuel. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-924AXI InternationalMichael Piedimonte239-690-958912/19/2019NET COMM TOUCH PLUS Controller per BOM # 2219005803.00For use with AST Systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirementsEQ-926PMP CorporationJames Longworth860-677-96561/21/2020PMP 63228 and 63229 Piping Sump Sensors. For use with Veeder Root TLS-450 series, TLS-4 series, TLS-350 series, TLS-300 series, TLS-PC, ILS-350, Simplicity, Gilbarco EMC series, EMC Basic series, EMC-PC, Red Jacket ProMax and ProPlus consoles.For use with AST and UST Systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.[Back to Categories]Leak Detection/ Liquid Detector (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-929Morrison Brothers Co.Jerry Schollmeyer800-553-48403/18/2020AST Series 724 Interstitial Leak Indicator and 724O Overfill IndicatorFor use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-932PMP CorporationJames Longworth860-677-96565/7/2020Fiberglass Tank Interstitial Sensor – Single Point Non-Discriminating – Model PMP 63409. For use with Veeder-Root TLS-450 series, TLS-4 series, TLS-350 series, TLS-300 series, TLS-PC, ILS-350, Simplicity, Gilbarco EMC series, EMC Basic series, EMC-PC, Red Jacket ProMax and ProPlus consoles.For use with AST and UST Systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirementsEQ-933PMP CorporationJames Longworth860-677-96565/7/2020Steel Tank Interstitial Sensor – Single Point Non-Discriminating – Models PMP 63420 and 63460. For use with Veeder-Root TLS-450 series, TLS-4 series, TLS-350 series, TLS-300 series, TLS-PC, ILS-350, Simplicity, Gilbarco EMC series, EMC Basic series, EMC-PC, Red Jacket ProMax and ProPlus consoles.For use with AST and UST Systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirementsEQ-934AXI InternationalMichael Piedimonte239-271-36165/01/2020SMART COMM Controller – UL 508A SOSA Listed (File Number: E314185 & Project Number: 07CA30605)For use with AST and UST Systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirementsEQ-941Morrison Brothers Co.Jerry Schollmeyer800-553-48407/10/2020AST Series 1618 and 1619 Vertical Tank Level Gauge: Vertical Tank Liquid Level Gauge with Overfill Alarm Relay Output -1619 only (to a Morrison Bros. 918 Alarm sold separately) For use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-942Morrison Brothers Co.Jerry Schollmeyer800-553-48407/14/2020AST Series 1518 and 1519 Horizontal or Vertical Tank – Mechanical Tank Top Level Gauge: Tank Liquid Level Gauge with Overfill Alarm Relay Output -1519 only (to a Morrison Bros. Alarm sold separately)For use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.Leak Detection/ Automatic Tank GaugingFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-004Egemin Naamloze VennootschapTom Berebrouckx011-32-3-031/ 645275905/02/1991ESPI SeriesEQ-014Franklin Fueling Systems (Formerly EBW, Inc.)Dan Marston207-283-01565/06/1991AutostikEQ-033Veeder-RootTech SupportCustomer Svc800-323-1799888-561-79426/17/1991TLS 250, TLS 250i, TLS 350, EMC Enhanced, ProMaxEQ-040Mine Safety AppliancesBill Freeman800-672-46789/05/1991RTM-1 Tank GaugingEQ-041Gasboy International Tom Glahn215-885-46319/05/1991Gasboy TMS-500EQ-046Franklin Fueling Systems (Formerly Incon Intelligent Controls, Inc.)Dan Marston207-571-115110/15/1991TS-2000EQ-059Ronan Engineering CompanyTodd Stewart800-327-66261/16/1992Ronan X-76EQ-064PC Interaction, Inc. (Formerly Alert Technologies)John Ainley815-337-16002/14/1992Anilay Tank master ( Formerly Alert Model 2000 ATG)EQ-080Red Jacket PumpsChad Oberman800-262-75397/07/1992RLM 5001EQ-081Red Jacket PumpsChad Oberman800-262-75397/07/1992RLM 5000EQ-084Andover Controls CorporationAlan Williams978-470-05551/08/1992Andover Automatic Tank GaugingEQ-093Tidel Engineering, Inc.David Tucker800-678-75779/29/1992EMS 2000EQ-094Tidel Engineering, Inc.David Tucker800-678-75779/29/1992EMS 3000[Back to Categories]Leak Detection/ Automatic Tank Gauging (Continued)File pany NameContact TelephoneApproval DateProduct’s NameCondition(s)EQ-096Franklin Fueling Systems (Formerly Incon Intelligent Controls, Inc.)Dan Marston207-283-015610/08/1992TS-1000EQ-105OPW (Formerly Petro Vend, Inc.)Gene Pope813-969-190012/081992Site Sentinel 1 & 2EQ-113Red Jacket PumpsChad Oberman800-262-75393/10/1993ST SystemEQ-121Franklin Fueling SystemsDan Marston207-283-01564/22/1993Auto Stik IIEQ-127Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79424/29/1993CEI 3000EQ-130Gilbarco, Inc.Steve Phillippie336-547-51546/10/1993Gilbarco TM-2, TM-3, EMCEQ-135Andover Controls, Inc.Alan Williams497-470-05557/12/1993Andover Infinity SystemEQ-151Franklin Fueling SystemsDan Marston207-283-01561/04/1994Auto Stik JrEQ-178Arizona Instrument CorporationKaty Reed602-470-14149/09/1994Encompass Automatic Tank Gauging SystemEQ-186USTest, Inc.James Mitchell337-839-01071/10/1995USTest 2001 Automatic Tank GaugingEQ-196Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79425/12/1995TLS-200, TLS-200i, TLS-300, TLS-400, EMC Basic, ProPlus,EQ-214Environment & Safety, Inc.Alexander Jekat408-954-90817/21/1995Easi-Level TruEQ-237L & J TechnologiesRonald Davis708-236-60002/05/1996L & J MCG 1100 and MCG 8100EQ-278Simmons Corp (Formerly Caldwell Systems Corp) Howard Dockery800-848-83784/22/1997Tank Manager Automatic Tank GaugingEQ-303Pneumercator Co., Inc.Jonathon Levy800-209-785812/11/1997Pneumercator TMS 2000 and TMs 3000 Automatic Tank GaugingEQ-327Franklin Fueling Systems (Formerly Incon Intelligent Controls, Inc.)Dan Marston207-283-01568/03/1998TS 1001, and TS 2001 Automatic Tank Gauging[Back to Categories]Leak Detection/ Automatic Tank Gauging (Continued)File pany Name ContactTelephoneApproval Date Product’s NameCondition(s)EQ-380Practical Tank Management, Inc.W. R. Dean713-529-87347/20/1999Digital Level Sensor Automatic Tank GaugingEQ-500Omntec Mfg., Inc.Tara Traganas631-981-20017/30/2001Omntec OEL 8000, K-OEL 8000, OEL 8000 II, K-OEL 8000 II with MTG Stainless Steel Magnetostrictive ProbeOmntec OEL 8000, K-OEL 8000, OEL 8000 II, K-OEL 8000 II with MTG Stainless Steel Magnetostrictive Probe is approved for automatic tank gauging in underground storage tanks with capacities up to 30,000 gallons in the State of Florida. The Department’s previous approval EQ-245, dated April 5, 1996, is no longer in effect. EQ-514OPW ( Formerly Tuthill Transfer Systems and the Emco Electronics Division)Gene Pope813-969-190012/31/2001EECO Systems 3000, 2000, 1500, 1000, 1000EG and Galaxy ATG systems with the QQ0400-4xx Magnetostrictive ProbeThe product is approved for automatic tank gauging in underground storage tanks with capacities up to 20,000 gallons in the State of Florida. The Department’s previous approvals EQ-070, dated May 19, 1992, and EQ-071, dated May 19, 1992, are no longer in effect.EQ-549Barton Instruments Systems, LLCJerry Copeland760-243-977111/23/2002Barton 3500 ATG SystemApproved for automatic tank gauging in underground storage tanks with capacities up to 75,000 gallons in the State of Florida. A copy of the annual operability test shall be given by the manufacturer or distributor to any tank owner purchasing or using this system in the state of FL.[Back to Categories]Leak Detection/ Automatic Tank Gauging (Continued)File pany Name ContactTelephoneApproval Date Product’s NameCondition(s)EQ-563Advanced Telemetrics LimitedDrake Dunn210-828-14829/26/2003Advanced Telemetrics Tank Gauge Model 1100LD/2Approved for automatic tank gauging in underground storage tanks with capacities up to 30,000 gallons in the State of Florida. EQ-623Varec, Inc.John Vawser770-335-817212/15/2005Varec Tank Gauge Model MTGApproved for automatic tank gauging in underground storage tanks with capacities up to 75,000 gallons and in field–erected underground storage tanks with capacities up to 100,000 gallons in the State of FL. EQ-644WorldTelemetry , Inc.Jennifer Corser918-232-74197/31/2006WorldTelemetry Data Link ATGS v2.6-h with magnetostrictive probeApproved for automatic tank gauging in underground storage tanks with capacities up to 20,000 gallons in the State of Florida.EQ-679Franklin Fueling SystemsDan Marston207-283-01567/12/2007Incon Tank Sentinel ATG with SCALD 2.0, Model TS-750, with magnetostrictive probe automatic tank gaugingIncon Model TS-750 with magnetostrictive probe automatic tank gauging is approved in the State of Florida for automatic tank gauging with maximum tank capacity of 30,000 gallons for 0.2 gph and maximum tank capacity of 15,000 gallons for 0.1 gph, and approved as a continuous automatic tank gauging in underground storage tanks with maximum capacities of 49,336 gallons for a single tank or for all tanks manifolded together. [Back to Categories]Leak Detection/ Automatic Tank Gauging (Continued)File pany NameContactTelephoneApproval Date Product’s NameCondition(s)EQ-719OPWGene Pope813-969-190012/12/2008OPW Site Sentinel iSite Automatic Tank GaugingApproved for use as an automatic tank gauging for underground storage tanks in the State of Florida for tanks up to maximum capacity of 20,000 gallons, provided that the system is installed and tested annually in accordance with Exhibit A prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-863Pope & Associates, Inc.Gene Pope813-969-1900 3/04/2016OPW SiteSentinel?Nano? Console Tank Gauge, Probes and SensorsMay be used as an automatic tank gauge, as an approved overfill protection device when equipped with an alarm, and as an interstitial release detection device for secondary containment systems for underground and aboveground storage tank systems.EQ-876Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79425/18/2017Veeder-Root TLS4i (up to 4 tanks) and TLSc (up to two tanks) – 8601 Series ATG Console and associated equipmentInstallation, operation and maintenance shall be in accordance with the manufacturer’s recommendations.[Back to Categories]Leak Detection/ Continuous Automatic Tank GaugingFile pany NameContactTelephoneApproval Date Product’s NameCondition(s)EQ-180Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-794212/16/1994ProMax/CSLDNo monitoring wells are required if system shall be kept in continuous mode with daily print-out.EQ-198Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79425/12/1995TLS-300/CSLD, TLS-400/CSLD, EMC Basic/CSLD, ProPlus/CSLDNo monitoring wells are required if system shall be kept in continuous mode with daily print-out.EQ-337Franklin Fueling Systems (Formerly Incon Intelligent Controls, Inc.)Dan Marston207-283-015610/08/1998Incon Continuous Leak Detection System (CITLDS)EQ-409Red Jacket PumpsChad Oberman800-262-753912/14/1999ST System , Pro-Link SystemEQ-422Franklin Fueling SystemsDan Marston207-283-01561/21/2000Auto/Stik Series 960 & 970 C.A.T.G.S.EQ-513OPW (Formerly Tuthill Transfer Systems and the Emco Electronics Division)Gene Pope813-969-190012/31/2001EECO Systems 3000, 2000, 1500, 1000, 1000EG and Galaxy ATG systems with the QQ0400-4xx Magnetostrictive ProbeThe product is approved for continuous automatic tank gauging in underground storage tanks with capacities up to 20,000 gallons in the State of Florida. EQ-546Omntec Mfg., Inc.Tara Traganas631-981-200111/21/2002OEL 8000II and KOEL 8000II controllers with the Omntec CITLD ATG systemThe system is approved for continuous automatic tank gauging in underground storage tanks with capacities up to 18,000 gallons.EQ-652Franklin Fueling SystemsDan Marston207-283-015610/18/2006Incon Models TS-5, TS-550, TS-5000 with magnetostrictive probe automatic tank gaugingThe Incon Models TS-5, TS-550, TS-550 evo, TS-5000 and TS-5000 EVO with magnetostrictive probe automatic tank gauging is approved for continuous automatic tank gauging in underground storage tanks with maximum capacities of 49,336 gallons for a single tank or for all tanks manifolded together.EQ-652 AmendedFranklin Fueling SystemsSandra Adams800-225-97875/21/2012Model TS-550 EVO Fuel Management System and TS-5000 EVO (added 11/24/2014)[Back to Categories]Leak Detection/ Continuous Automatic Tank Gauging (Continued)File pany Name ContactTelephoneApproval Date Product’s NameCondition(s)EQ-679Franklin Fueling SystemsDan Marston207-283-01567/12/2007Incon Tank Sentinel ATG with SCALD 2.0, Model TS-750, with magnetostrictive probe automatic tank gaugingIncon Model TS-750 with magnetostrictive probe automatic tank gauging is approved in the State of Florida for automatic tank gauging with maximum tank capacity of 30,000 gallons for 0.2 gph and maximum tank capacity of 15,000 gallons for 0.1 gph, and approved as a continuous automatic tank gauging in underground storage tanks with maximum capacities of 49,336 gallons for a single tank or for all tanks manifolded together.EQ-719OPWGene Pope813-969-190012/12/2008OPW Site Sentinel iSite Automatic tank GaugingApproved in the State of Florida for continuous automatic tank gauging in underground storage tanks with maximum capacities of 30,258 gallons and a maximum monthly throughput of 397,883 gallons provided that the system is installed and tested annually in accordance with Exhibit A prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.[Back to Categories]Leak Detection/ Continuous Automatic Tank Gauging (Continued)File pany Name ContactTelephoneApproval Date Product’s NameCondition(s)EQ-723Veeder-RootTech SupportCustomer Svc800-323-1799888-561-794212/23/2008Veeder-Root TLS-450 ATG CSLD monitoring systemApproved in the State of Florida for continuous automatic tank gauging in underground storage tanks with maximum capacities of 38,170 gallons for a single tank or for all tanks manifolded together and monthly maximum throughput of 221,890 gallons. EQ-798OPWGene Pope813-969-19001/03/2013OPW Fuel Management Systems Site Sentinel iSite Series of Automatic Tank Gauges with Integra ConsoleApproved for continuous automatic tank gauging in underground storage tanks with maximum capacities of 30,258 gallons and a monthly throughput of 397,883 gallons. Also includes sensor and probe release detection in interstices, sumps and liners. Installation should be in accordance with the manufacturer’s recommendations.EQ-803OMNTEC Mfg., Inc.Tara Longobardi631-468-83602/27/2013OMNTEC Mfg., Inc. PROTEUS Line of Automatic Tank Line Gauging and Leak Detection SystemsRelease detection methods associated with the ATG of USTs and the interstitial monitoring of UST systems or ASTs EQ-834Morrison Bros. Co.Kelly Briant800-553-484012/23/2014Model 918AC System InterfaceInstallation, operation and maintenance shall be in accordance with the manufacturer’s recommendations.[Back to Categories] Leak Detection/ Continuous Automatic Tank Gauging (Continued)File pany Name ContactTelephoneApproval Date Product’s NameCondition(s)EQ-887OPW Fuel Management SystemsGene Pope813-431-20092/06/2018OPW SiteSentinel? Integra 100? and 500? Automatic Tank Gauging SystemMay be used as an automatic tank gauge, as an approved overfill protection device when equipped with an alarm, and as an interstitial release detection device for secondary containment systems for underground and aboveground storage tank systems.EQ-890Franklin Fueling SystemsSandra Adams800-225-97873/05/2018Franklin Fueling Systems EVO Series ATG. Models EVO?200 and EVO?400 for ASTs and USTsInstallation and programming (requires a Franklin Fueling System certified technician), operation and maintenance shall be in accordance with the manufacturer’s requirements.EQ-891Franklin Fueling SystemsSandra Adams800-225-97873/12/2018Frankly Fueling Systems Statistical Continuous Automatic Leak Detection 3 (SCALD3?). To be used with EQ-652A, EQ-818, and EQ-890.Statistical Continuous Automatic Leak Detection 3 software is an algorithm design to continuously gather and analyze data to detect leaks in undergroundstorage tanks. SCALD3 runs on several Franklin Fueling Systems’ automatic tank gauges (ATGs) and is 3rd party certified to monitor tank and manifolds with a capacity of up to 32,891 gallons.[Back to Categories] Leak Detection/ Statistical Inventory Reconciliation (SIR)File pany Name ContactTelephoneApproval DateProduct’s Name Condition(s)EQ-179Syscorp, Inc.Richard Forester205-853-000410/05/1994StoreVision Statistical Inventory ReconciliationFinal Order was rescinded on 4/25/2001 per manufacturer’s request.EQ-377USTMAN Technologies, Inc.Cliff Miller800-253-80546/01/1999USTMAN SIR Version 95.2A SystemEQ-451Entropy LimitedDeborah Talanian781-259-89019/15/2000PTIC Rev. 90The Department’s previous approval EQ-018, dated June 20, 1991, is hereby revoked. EQ-453Horner Products, Inc.Jack Horner800-443-07119/29/2000SIR Pro 1 Version 3.0The Department’s previous approval EQ-126, dated May 10, 1993, is hereby revoked due to the fact the SIR PRO 1 Version 3.0 supersedes the previously issued equipment approval. EQ-458USTMAN Industries, Inc.Cliff Miller800-253-805410/04/2000USTMAN SIR Version 95.2B SystemThe Department’s previous approvals EQ-065, dated February 20, 1992, and EQ-104, dated December 8, 1992, are hereby revoked due to the fact that EQ-065, and EQ-104 are not being used in the State of Florida, and by the company’s request the orders are revoked.[Back to Categories]Leak Detection/ Statistical Inventory Reconciliation (SIR) (Continued)File pany Name ContactTelephoneApproval DateProduct’s Name Condition(s)EQ-466TeleData, Inc.Tony Weston561-219-466111/29/2000TankMate Version 3.12The Department’s previous approval EQ-241, dated April 5, 1996, is no longer in effect.EQ-468SIR International, Inc.Jim Flynn918-479-58002/27/2001Mitchell’s SIR Program, Version 2.6.The Department’s previous approval EQ-069, dated May 19, 1992, is hereby rescinded and no longer in effect. EQ-473Computerizing, Inc. Bob Starkey256-259-18051/12/2001Computank Version 3.0 SIR SystemThe Department’s previous approval EQ-98, dated October 19, 1992, is no longer in effect.EQ-480Warren Rogers Associates, Inc.William Jones401-846-47472/14/2001WRA SIR Version 5.1The Department’s previous approval EQ-134, dated June 14, 1993, is no longer in effect.EQ-492Sir Phoenix, Inc.Walter Morgan931-852-41214/18/2001LEOMA Version 1.50 SIR MethodThe Department’s previous approval EQ-171, dated June 6, 1994, is no longer in effect. EQ-502Simmons CorporationHoward Dockery800-848-83787/30/2001Wilco Data Collection Unit and SIR 5.7 L.M.Conditional Approval[Back to Categories]Leak Detection/ Statistical Inventory Reconciliation (SIR) (Continued)File pany Name ContactTelephoneApproval DateProduct’s Name Condition(s)EQ-508Precision Tank Services, Inc.Sandy Hicks704-892-860010/26/2001TotalSIR Version 1.0TotalSIR Version 1.0 approved as a statistical inventory reconciliation method for manifolded tanks and single tanks with a capacity of up to 45,000 gallons in the State of Florida. The Department’s previous approval EQ-307, dated January 12, 1998 is no longer in effect.EQ-520Warren Rogers Associates, Inc.William Jones401-846-47473/01/2002WRA Version 5.2, SIR MethodThe product is approved as a statistical inventory reconciliation method for single tanks and manifolded tanks up to three tanks with a capacity of up to 36,000 gallons in the State of Florida.EQ-532Advanced Telemetrics LimitedDrake Dunn210-828-14825/23/2002Tanknetics Version V.2.1 SIR MethodTanknetics Version V.2.1 SIR Method approved in the State of Florida as a statistical inventory reconciliation method for single tanks with individual capacities up to 45,000 gallons, and for up to four manifolded tanks with a total sum of their capacities of up to 45,000 gallons. [Back to Categories]Leak Detection/ Statistical Inventory Reconciliation (SIR) (Continued)File pany Name ContactTelephoneApproval DateProduct’s Name Condition(s)EQ-539Sir International, Inc.Jim Flynn918-479-58008/21/2002Mitchell’s Sir version 2.7Approved as a statistical inventory reconciliation method for single tanks and for manifolded tanks, up to four tanks maximum, and with a total capacity of up to 45,000 gallons.EQ-624Simmons CorporationHoward Dockery800-848-837812/27/2005SIR 5.7 L.M.Approved in the State of Florida as a statistical inventory reconciliation method for single tanks and for manifolded tanks, up to five tanks maximum, and with a total capacity of up to 60,000 gallons.EQ-701Warren Rogers Associates, Inc.William Jones401-846-47473/06/2008WRA PetroNetwork S3 (Version D) with magnetostrictive probe automatic tank gauging and pressurized line leak detectorConditional Approval[Back to Categories]Leak Detection/ Line Leak Detector with Automatic Shut-offFile pany NameContactTelephoneApproval DateProduct’s NameCondition (s)EQ-074Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79426/23/1992LLP-2EQ-077Mallory ControlsMark Becker317-328-40207/07/1992Pollulert FD-200 PRSAEQ-078Red Jacket PumpsChad Oberman800-262-75397/07/1992PPM-4000EQ-079Red Jacket PumpsChad Oberman800-262-75397/07/1992RLM-9000EQ-083Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79427/29/1992TLS-350 LLD, EMC Enhanced LLD, EMC-J LLD, ProMax LLD, TLS-350/CSLD, EMC Enhanced/CSLD, EMC-J/CSLD EQ-119Tidel Engineering, Inc.David Tucker800-678-75774/05/1993EMS-3500EQ-131Gilbarco, Inc.Steve Phillippie336-547-5156/10/1993Gilbarco in line leak detectorEQ-139Hasstech, Inc.Paul Muehleisen619-457-58808/12/1993LineTite Pipeline monitorEQ-144Campo Miller, Inc.Mary Filippi209-781-68629/17/1993LS 300-120 SeriesEQ-182Ronan Engineering CompanyTodd Stewart800-327-662610/18/1994X-76 Line Leak DetectorEQ-221Franklin Fueling Systems (Formerly Incon Intelligent Controls, Inc.)Dan Marston207-283-015610/03/1995INCON TS LLDEQ-271Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-794211/26/1996Pressurized Line Leak Detector Series 8494, and LLD-300EQ-311Red Jacket PumpsChad Oberman800-262-75391/20/1998ST1401L, ST1801L, CPT, and Pro Link Line Leak DetectorEQ-332Vaporless Manufacturing, Inc.Steve Wilson800-367-01857/31/1998PLC-5000EQ-515OPW Fuel Management Systems (Formerly Tuthill Transfer Systems and the Emco Electronics Division)Gene Pope813-969-19002/08/2002EECO LLD-Plus systemThe Department’s previous approval EQ-195, dated March 1, 1995, is no longer in effect.[Back to Categories] Leak Detection/ Line Leak Detector with Automatic Shut-off (Continued)File pany Name ContactTelephoneApproval DateProduct’s NameCondition (s)EQ-652Franklin Fueling SystemsDan Marston207-283-015610/18/2006Incon Models TS-5, TS-550, TS-5000 with magnetostrictive probe automatic tank gaugingThe Incon Models TS-5, TS-550, TS-550 evo, TS-5000 and TS-5000 EVO with magnetostrictive probe automatic tank gauging is approved as an automatic line leak detector with flow shut-off and continuous automatic tank gauging in underground storage tanks with maximum capacities of 49,336 gallons for a single tank or for all tanks manifolded together.EQ-652 AmendedFranklin Fueling SystemsSandra Adams800-225-97875/21/2012Model TS-550 EVO Fuel Management System and TS-5000 EVO (added 11/24/2014)EQ-722Veeder-RootTech SupportCustomer Svc800-323-1799888-561-794212/23/2008Veeder-Root Console Model TLS-450 and TLS-450PLUS PLLD pipeline leak detection systemApproved for pressurized piping leak detection in the State of Florida. The systems must be tested upon installation, and at least once on annual basis in accordance with Exhibit A, for Rule 62-761.700, F.A.C., annual operability requirements and recorded in accordance with Rule 62-761.710, F.A.C, requirements in Exhibit A attached with this Final Order.EQ-810Pope & Associates, Inc.Gene Pope813-969-19007/02/2013OPW Fuel Management Systems – OPW Model 327 VLLD – Line Leak Detector with Automatic Shut-offThe installation and operation shall be in accordance with the manufacturer’s recommendations. [Back to Categories]Leak Detector/ Mechanical Line Leak Detector with Flow RestrictorFile pany Name ContactTelephoneApproval DateProduct’s Name Condition(s)EQ-329Vaporless Manufacturing, Inc.Steve Wilson800-367-01857/31/1998Model 98 LD-2000, Model 98 LD-2000 PLS, Model LD-3000, and Model 3000S Mechanical Line Leak DetectorsEQ-335Franklin Fueling Systems (Formerly FE Petro, Inc.)Sandra Adams608-838-56689/08/1998STP-MLD+G, STP MLD+AG, STP-MLD+D and STP-MLD+BD Pipeline Leak Detector and STP-MLD Mechanical Line Leak DetectorsEQ-360Vaporless Manufacturing, Inc.Steve Wilson800-367-01852/18/1999Model 99 LD-2000, Model 99 LD-2200 Mechanical Line Leak DetectorsEQ-373Red Jacket PumpsChad Oberman800-262-75394/08/1999Red Jacket Models FX1, FX2, FX1D, FX2D, FX1V, FX2V, FXD1V, and FX2DV Mechanical Line Leak DetectorsEQ-646Vaporless Manufacturing, Inc.Steve Wilson928-775-51918/03/2006Vaporless Manufacturing Inc. Model ISM-4080 Integrated Shutdown ModuleApproved for small diameter piping mechanical line leak detector with pump shut-off in the State of Florida.[Back to Categories]Leak Detection/ Single Wall UST and AST SystemFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-019World Enviro System, Inc.John Hendershot405-275-75656/20/1991Vacuum Monitor SystemTightness test the tanks before applying the system.EQ-091PermAlert ESPCorey Hill847-966-22359/29/1992Updated 7/12/2019PAL-AT and LiquidWatch Leak Detection (Formerly Tank Watch leak detection) Model Numbers AT30C, AT30K, AT75CConditional approval for piping leak detection.EQ-138Geotech Industries, Inc.Randell Thompson904-787-06088/23/1993Geotech Dilution MethodConditional ApprovalEQ-141W.L. & AssociatesSamuel Berkman602-438-69059/17/1993LEAK LEARN SystemConditional approval for piping leak detection.EQ-149Omega Environmental, Inc.Michael Bailey415-989-34001/04/1994TC-110 SystemDouble wall systems only. Provides pneumatic leak prevention, pump shut down, inventory controls, overfill protection. It is not approved for overfill protection & inventory control.EQ-398FCI Environmental, Inc.Dan Wien800-363-968212/06/1999PetroSense DHP-100 Probe (Models SDI-12 and RS485) Continuous Monitoring System (hereinafter DHP-100 Probe), and the PetroSense Portable Hydrocarbon Analyzer AHP-100 ProbeEQ-399Industrial HeaterTerry Warren901-382-476111/03/1999Sensorcomm TLD 5000Conditional Approval[Back to Categories]Leak Detection/ Single Wall UST and AST System (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-551Pentair (Formerly Tyco Thermal Controls)Terry Warren901-382-476111/26/2002TraceTek TT5000 leak detection system for single-walled underground bulk product piping Conditional ApprovalEQ-558Praxair Services, Inc.Randy Golding520-888-94006/12/2003Tracer TightConditional Approval[Back to Categories]Leak Detection/ Breach of IntegrityFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-218EuroTank Systems, LLCManfred Fiech352-629-37009/21/1995Euro Vac Leak Detector Model Vakumatic IIIF, Euro Vac Leak Detector Vakumatic 17Ex, and Euro Guard Detector Model D9Interstitial monitoring for double-wall tanks.EQ-416Titan Tank Company of FloridaDavid Palazzo813-986-79961/03/2000Pematel/Titan tank Leak Detection SystemIf vacuum interstitial release detection is employed, and the initial vacuum was set at 15 inches of mercury, a vacuum decrease of 5 inches of mercury in less than 12 hours will constitute an incident in accordance with subsection 62-761.450(2), F.A.C.EQ-470Euro-Tank Systems, LLCManfred Fiech352-629-370012/22/2000Euro-Guard Leak preventer Model DL-4000(a) The system triggers the alarm when the pressure drops to 4.64 psi and below; (b) The groundwater is not more than 9.51 feet above the tank bottom; and (c) The hydrostatic pressure of the product acting on the tank bottom shall not exceed 4.2 psi.[Back to Categories]Leak Detection/ Breach of Integrity (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-556Ameron InternationalJoie Folkers713-690-77775/23/2003Ameron Brine System for the Ameron Double-Wall Dualoy?/3000 LCX Piping Systema) The system is designed by the manufacturer based upon piping length, reservoir size, location of water table, and location of the reservoir at each site; b) The sensors and the system are tested annually as required by Rule 62-761.700, F.A.C. requirements; and c) A copy of this order shall be distributed to any facility that uses this product.EQ-598Western Fiberglass, Inc.Mike Lewis707-523-205010/28/2004Co-Flow? Hydraulic Coaxial Monitoring System for the Western Fiberglass Co-Flex #34C9 Piping SystemConditional ApprovalEQ-601Enhanced Leak Detection, Inc.Dan McGill714-523-019411/17/2004Vacu-Tite TestApproved as a breach of integrity test for small diameter piping systems.EQ-607SGBJost Berg49(0)271-48964403/01/2005Vacuum Leak Detection System Models VL 30P, VL 350P, and VL 400PConditional ApprovalEQ-628Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79421/17/2006Veeder-Root Mag Sensor Hydrostatic Test, and Secondary Containment Vacuum Sensing SystemConditional Approval[Back to Categories]Leak Detection/ Breach of Integrity (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-773PCE Petroleum Contractors EnterpriseRaul (Nick) Necoechea407-342-13857/28/2011PCE Tank D/W Containment Interstitial Monitoring System for Lined Tanks – wet or dry interstitial monitoring of lined USTsThe release detection methodology for the interstice shall be according to the manufacturer’s recommendations. May be used for wet or dry interstitial monitoring of lined USTs.EQ-808Leak Detection Technologies, Inc.David Rabb855-255-5325 x7005/31/2013Minimum Detectible Leak Test (Mdleak?) Enhanced Leak Detection and Leak Location Test MethodMay be used as a monthly release detection method or integrity testing for single-walled underground bulk product piping, for interstitial monitoring or an integrity testing of UST systems and for interstitial monitoring or integrity testing for AST system components that are in contact with soil.EQ-892Franklin Fueling SystemsSandra Adams608-838-56683/28/2018Franklin Fueling Systems INCON? Brand TS-STS Sump Test System – consists of T750 ATG and up to 4 Franklin Fueling Systems TSP-LL2 Magnetostrictive probes. (Previous related registrations include EQ-327, EQ-337 and EQ-679)For use with UST systems. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-023Associated Environmental ServicesDon James805-326-01736/20/1991AES System IIOverfill testEQ-035Xerxes CorporationGlen Nylannder612-887-18908/19/1991HydrostatThese systems could be used as continuous leak detection in the interstitial space for Xerxes double wall tanks only. The system could tightness test the tanks only and have been approved accordingly.EQ-036Containment Solution, Inc.Kevin Soeder936-756-77318/19/1991HydrostaticThese systems could be used as continuous leak detection in the interstitial space for O/C tanks only. The system could tightness test the tanks only and have been approved accordingly.EQ-050Schuster InstrumentsPeter Schuster989-684-663810/28/1991Tele-a-leakOverfill testEQ-051AinlayJohn R. Ainlay708-658-279911/08/1991Soiltest Ainlay Tank Tegrity TesterOverfill test[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-111Lab One AnalyticalJerry Wiley918-250-10133/08/1993Search and Line TestThe storage tank and piping must be inoculated 14 days prior to testing. This system shall not be used in high water table area. This system is not used for an urgent testing. The test shall evaluate the entire system.EQ-183Metal Products CompanyJohn Gammage404-945-838310/24/1994Interstitial Vacuum Test(IVT)For initial tightness testing of Plasteel double wall tanks and Plasteel Elutron tanks per manufacturer’s protocol on the forms provided by Metal Products tanks.EQ-219Southeast Tank CorporationDavid Palazzo813-986-10439/21/1995Permatank/Permatel Precision Test SystemFor initial tightness testing of Permatank with secondary containment jacked tanks per manufacturer’s protocol on the forms provided by Southeast Tank Corp.[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-222Modern Welding Company of Florida, Inc.Gene Schober407-843-127010/09/1995Precision Test SystemFor initial tightness testing of Glasteel 2 Jacketed tanks, GlasteelDouble wall Type I, and Glasteel Double Wall Type II per manufacturer’s protocol on the forms provided by Modern Welding Company.EQ-243USTEST, Inc.James Mitchell337-839-10704/08/19962000/LL & 2000/UPerform two tests. First test at a minimum 65% full and the second test the ullage area (remainder 35%). Check overfill and spill containment devices. EQ-250Leak Detection Systems, Inc.Jeffery Riotte617-878-77664/22/1996Tank AuditorOverfill TestEQ-284Horner Creative Products, Inc.Brad Estabrook989-891-98685/07/1997EZ 3(a) For non-volatile products, the ullage area shall be between 500 and 1500 gallons. Therefore, the smallest tank that can be tested is 1500 gallons, (b) For volatile products, the ullage area shall be between 800 and 2500 gallons. Therefore, the smallest tank that can be tested is 2300 gallons; and (c) Overfill and spill containment shall be checked for proper operation.[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-324USTEST, Inc.James Mitchell337-839-10704/16/19982000/P & 2000/UPerform two tests. First test at a minimum 78.6% full and the second test the ullage area (remainder 21.4%). Check overfill and spill Containment devices. The EQ-061 dated 1/27/92 and EQ-092 dated 9/29/92 are revoked. EQ-325Tanknology –NDEJames Boeka800-964-00708/06/1998VacuTect, Sure Test Assured Tight System and NDE U3 ullage testsConditional ApprovalEQ-325 AmendmentTanknology –NDEJames Boeka800-964-00706/17/2003VacuTect Non-Volumetric Tightness Test method, Sure Test-Assured Tight System Series IV Volumetric Tank Tightness Test method, and the PTK-88 and the TLD-1 Line Tightness Test methodConditional ApprovalEQ-359Titan Tank Company of FloridaJan Burnette813-986-799612/17/1998Titan tank Double Wall Tightness TestFor initial tightness testing of Double wall Titan Tank per manufacturer’s protocol on the forms provided by Titan Tank Company of Florida.EQ-365Purpora Engineering, Inc. (Formerly Alert Technologies)Dawn Brooks262-536-40813/3/1999 Updated 2012, 2013, 2015, & 2019 Alert 1000 (revised 2012); Alert 1050 (revised 2012); Alert 1050X (revised 2012); Alert 2000 (revised 2012); & Alert 8200 Sonde (revised 2013)Conditional Approval[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-381Mass Technology CorporationJimmy Wolford610-275-61468/30/1999Precision Mass Measurement SystemConditional ApprovalEQ-452Estabrook’s, Inc.Brad Estabrook989-891-98689/29/2000EZY 3 Locator Plus Tank Tightness EquipmentThe tanks being tested using EZY 3 Locator Plus tank tightness equipment are less than 20,000 gallons. The Department’s previous approvals EQ-020, dated June 20, 1991, and EQ-075, dated June 15, 1992 are hereby revoked due to the fact that EQ-020 is not being used in the State of Florida and by the company’s request, the order is revoked. EQ-284 dated May 7, 1997, supersedes EQ-075. [Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-452AmendmentEstabrook’s, Inc.Brad Estabrook989-891-98685/02/2003EZY 3 Locator Plus tank tightness method and the EZY-CHEK Line Leak DetectorThe EZY-CHEK Line Leak Detector may be used only on small diameter piping made of rigid fiberglass or corrosion protected steel. The EZY 3 Locator Plus tank tightness equipment and the EZY-CHEK Line Leak Detector must be calibrated annually in accordance with Rule 62-761.600(1)(a)2., F.A.C. Only certified testers, re-certified by Estabrook’s, Inc. every two years, may perform the EZY 3 Locator Plus tank tightness method as stated in third party evaluation of system.[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-489Service Welding & Machine Co., Inc.Carl Greer502-585-42955/10/2001PermaTel leak detection systema) This Order is only applicable for Rule 62-761.500(2)(a)4., F.A.C., for testing of PermaTank’s UST secondary containment at the time of installation; (b)The tightness tests, vacuum level readings, and other information shall be recorded pursuant to Rule 62-761.710, F.A.C., on the Installation Checklist Form marked as Exhibit A, and the Tank Delivery Acceptance Report marked as Exhibit B; and (c) After completion of the installation, the tank installer shall send copies of Exhibit A and Exhibit B to the manufacturer to verify that the tank is tight. EQ-506Highland Tank Mfg. Co.Steve Soldner717-664-061710/05/2001Highland Tank Manufacturing Company’s manufacturing of the Titan underground storage tank initial tightness testConditional Approval[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-529AAA Tank Testers, Inc.Ed Price800-749-22195/03/2002Triangle T.E.I. 5000 tank tightness method and the Petro Tite Line Tester for pressurized small diameter line testingThe tanks being tested using the Triangle T.E.I. 5000 tank tightness equipment are less or equal than 20,000 gallons and are in porous backfill.EQ-530Sound Products Manufacturing, Inc.James Mitchell337-235-11845/09/2002UST 2001/P and 2000/U test methodsConditional ApprovalEQ-557Training and Services Corp.Mike Treat281-934-38396/02/2003Leak Computer Leak Test method, and the Acurite Line Test methodThe tanks being tested using Leak Computer Leak Test method are less than or equal to 12,000 gallons and the Acurite Line Test method may be used only on small diameter piping made of rigid fiberglass, corrosion protected steel, or flexible approved piping. The Department’s previous approval EQ-21, dated June 20, 1991, is no longer in effect.EQ-558Praxair Services, Inc.Randy Golding520-888-94006/12/2003Tracer TightConditional Approval[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-571Purpora Engineering, Inc. Dawn Brooks262-536-40811/14/2004(Updated 2/17/2015, and 3/14/2019)Petro Tite II, and Petro Comp Tank Test methods, and the Petro Tite Line Test method (4/11/2011 Revisions: PetroTite Line Tester Certification & PetroTite Line Tester for Flex Lines Certification)The tanks being tested using Petro Tite II and Petro Comp must be less than or equal to 15,000 gallons and the Petro Tite Line Test method may be used only on small diameter piping made of rigid fiberglass, corrosion-protected steel, or FDEP-approved thermoplastic flexible piping. The Department Final Orders EQ-005 issued on May 21, 1991, EQ-016 issued on June 20, 1991, and EQ-017 issued on June 20, 1991 are hereby revoked and are no longer in effect. EQ-602Enhanced Leak Detection, Inc.Dan McGill714-523-019412/03/2004Vacu-Tite and Heli-Tite TestApproved for small diameter piping systems tightness testing.EQ-671Praxair Services, Inc.Randy Golding520-888-94005/01/2007Praxair Pressure Line Tightness Testing MethodApproved for single-walled and double-walled small diameter piping system tightness testing in the State of Florida.EQ-694Modern Welding of Florida, Inc.Gene Schober407-843-127012/14/2007Modern Welding Double-Wall Tank GS-16, UL File Number MH3217For initial tightness testing of Double Wall Modern Welding Tank GS-16 per manufacturer’s protocol on the forms Exhibit A and Exhibit B provided by Modern Welding of Florida, Inc.[Back to Categories]UST/ Tank and Line Tightness Tester Manufacturers (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-760Tank Tech, Inc.Clark Braddock / Marshall T. Mott-Smith850-391-983512/15/2010Braddock Double-Wall Integrity Test and Braddock Phoenix Hybrid Tank Integrity TestThe Braddock Double-Wall Tank Integrity Test is approved in the State of Florida as an installation tightness test, an integrity test for double-walled underground storage tanks and a breach of integrity test for USTs provided that the interstitial space does not exceed 28 gallons on any test. The Braddock Phoenix Hybrid Tank Integrity Test is approved as an installation tightness test, an integrity test, and a breach of integrity test for Phoenix Hybrid USTs approved under EQ-403 and EQ-667.EQ-775Leighton O’Brien, Inc.Jeff Stevenson888-275-37818/30/2011Leighton O’Brien Technologies, Qualitative Dry Line Test PM2 and Quantitative Wet Line Test PM2; the MassTech International, Ltd., ML3P Line and the MassTech 2 Wet Test and 002 Ullage Test SystemApproved in the state of Florida for tightness testing or integrity testing of small diameter piping in contact with the soil or USTs. These tests shall be performed by individuals trained and knowledgeable with the test method and procedures.[Back to Categories]AST/ Tank Testers, API 653 InspectionFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-086Industrial NDT CompanyJames Moon800-845-19238/11/1992Vessel Inspection ProgramEQ-103MQS Inspection, Inc.Dennis Ross904-731-247212/08/1992Vessel Inspection ProgramEQ-107Longview Inspection, Inc.Walter Matulewicz800-256-544212/10/1992Aboveground Tank Inspection ProgramEQ-165Physical Acoustics CorporationPeter Whitfield609-884-08003/11/1994Aboveground Tank Inspection ProgramEQ-172Space Science ServicesSteven Crowley904-730-32135/27/1994Aboveground Storage Tank Inspection ProgramEQ-176Tank Engineering and Management ConsultantDonald Andreatta813-935-66977/07/1994Team Aboveground Tank Inspection ProgramEQ-211NerG Enterprises, Inc.Herb Askwith561-848-52526/26/1995TASTS Tank Inspection ProgramEQ-273Law Engineering and Environmental Services, Inc.Gregg Lentz904-396-51731/17/1997Aboveground tank Inspection ProgramEQ-302ARD Environmental, Inc.Eugene Silverman301-497-047710/07/1997In-Service Aboveground Inspection Program[Back to Categories]AST/ Tank Testers, API 653 Inspection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-799Vista Precision Solutions, Inc.Stephen Ford931-667-58751/10/2013Vista Precision Solutions, Inc. Low Range Differential-Pressure leak Detection and Integrity Monitoring System for ASTsApproved as a release detection system and an integrity monitoring system for bulk tanks with a capacity of 50,000 gals or greater capacity. Individual test periods shall be at least 20 hours in duration. Evaluations shall be made in accordance with the manufacturer’s protocols.[Back to Categories]Piping Testers/ Bulk Product Piping Testing; API 1110 Testing or EquivalentFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-212NerG Enterprises, Inc.Herb Askwith561-848-52526/26/1995TASTS Piping Inspection Integrity ProgramEQ-259Vista Precision Solutions, Inc. (Formerly Vista Research, Inc.)Stephen Ford937-669-58756/12/1996LT-100, and HT-100EQ-461Caldon, Inc.Anthony Mediate412-341-99204/16/2000Caldon Linewatch? 2000DLS SystemsEQ-462HansaConsult of North America, LLCWalter Phelps603-422-88334/16/2000HansaConsult Pressure-Step Tightness Control SystemEQ-485Vista Precision Solutions, Inc. (Formerly Vista Research, Inc.)Stephen Ford937-669-58752/28/2001HT-100-n (v1.0) and HT-100-n (v1.1) leak detection systemsThe product is approved for pressure testing of bulk product piping and hydrant piping in the State of Florida. It is also approved for monthly release detection of bulk product piping and hydrant piping at a release detection rate of 0.2 gallons per hour, provided that the line segments of bulk product piping is isolated for testing with a maximum capacity of 47,500 gallons.EQ-558Praxair Services, Inc.Randy Golding520-888-94006/12/2003Tracer TightConditional ApprovalEQ-642Hansa Consult of North AmericaSkip Phelps603-766-58907/24/2006HCNA Leak Detection System, Version 2.0Approved for annual bulk product piping testing.EQ-690Praxair Services, Inc.Randy Golding520-888-940011/15/2007SeeperTrace? method for single-walled bulk product piping release detectionConditional Approval[Back to Categories]Piping Testers/ Bulk Product Piping Testing; API 1110 Testing or Equivalent (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-804Leak Detection Technologies, Inc.David Rabb855-255-53253/08/2013Leak Detection Technologies, Inc. Pipeline Hydrostatic (PHDleak?) Tightness Test Leak Detection MethodApproved as a monthly release detection method for single-walled underground bulk product piping and an integrity test for single-walled underground bulk product piping.EQ-804 AmendedLeak Detection Technologies, Inc.David Rabb855-255-53255/15/2015Leak Detection Technologies, Inc. Pipeline Hydrostatic (PHDleak?) Tightness Test Leak Detection MethodThe Pipeline Hydrostatic (PHDleak?) Tightness Test Leak Detection Method is a monthly release detection method for single-walled and double-walled underground bulk product piping, for single-walled and double-walled underground integral piping, and for integrity testing of single-walled and double-walled underground integral piping systems.[Back to Categories]UST/ Spill Containment DevicesFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-052Franklin Fueling SystemsBradley Fawcett608-838-565011/21/1991Updated 11/4/2015EBW 705 and EBW 706-500UST Spill ContainmentEQ-118CNI ManufacturingToby Argandona818-962-66463/12/1993CNI Overfill devicesUST Spill ContainmentEQ-145OPW Gene Pope813-969-190010/20/1993OPW, 111, 211, 311, and 511 SeriesUST Spill ContainmentEQ-199Universal Valve Company, Inc.Thomas Nelson908-351-06066/06/199569RT, 70CD, and 71CDUST Spill ContainmentEQ-217Petroleum Equipment Manufacturing CO., Inc.(PEMCO)Adele Azcuy305-558-99119/21/1995Model 112UST Spill ContainmentEQ-224OPW Gene Pope813-969-190010/11/1995OPW 1 Series Spill Container, OPW 1 SC Series Spill Container, OPW 101 BG Series Spill Container, Pomeco 111 Series Spill Container, Pomeco 211 Series Spill ContainerUST Spill ContainmentEQ-261Amoco CorporationDavid Killingsworth954-938-27357/31/1996Amoco Pour In Place Overfill Containment UST Spill ContainmentEQ-298Universal valve CompanyBill Tobias800-255-47839/29/1997Model 72, 73, and 70C Spill ContainmentUST Spill ContainmentEQ-394OPW Fueling Containment Systems (Formerly Environ Products, Inc.)Kevin Webster919-464-3640Ext. 1108/30/1999Environ Overspill DeviceUST Spill ContainmentEQ-463Petroleum Equipment Manufacturing CO., Inc. (PEMCO)Adele Azcuy305-558-991110/23/2000Series 99UST Spill ContainmentEQ-524Emco Wheaton Retail CorporationJohn Vautier407-625-83394/18/2002Emco Wheaton spill containment equipment Models, A1003, A1004, and A1005UST Spill ContainmentEQ-555Franklin Fueling Systems (Formerly Phil-Tite Enterprises)Bradley Fawcett608-838-56505/23/2003Phil-Tite 85000 Series Spill CollectorUST Spill ContainmentEQ-588OPW Fueling ComponentsGene Pope813-969-19006/15/2004OPW 500 Series Contained Spill BucketsUST Spill ContainmentEQ-594Emco Wheaton Retail CorporationJohn Vautier407-625-83399/27/2004Emco Wheaton Secondary Spill Containment Model A1004-210SUST Spill Containment[Back to Categories]UST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-597Franklin Fueling SystemsAllan Busch608-838-878610/25/2004EBW 702-400 Series Spill ManholeUST Spill ContainmentEQ-604Franklin Fueling SystemsGary Saltz 608-838-878612/06/2004EBW 703-400 Series Spill ManholeUST Spill Containment must be encased in concrete.EQ-638OPW Fueling ComponentsGene Pope813-969-19004/20/2006OPW-POMECO 6591B Series Dual 20+ Gallon Shallow Bury Multi-Port Secondary Containment Spill BucketUST Spill ContainmentEQ-639Fairfield Industries, Inc.Daniel Clover973-483-01004/20/2006SCM-5DF Double-Wall Spill Containment ManholeUST Spill ContainmentEQ-640OPW Gene Pope813-969-19006/23/2006OPW 700L Series Superbucket Secondary Containment Spill Bucket, UL File No. MH27236UST Spill ContainmentEQ-654OPW Gene Pope813-969-190010/23/2006OPW 7111SS DW Series Spill Bucket, UL File No. MH27236UST Spill ContainmentEQ-656Franklin Fueling SystemsAllan Busch608-838-878611/06/2006Phil-Tite 400 and 500 Series Spill Containment Devices, UL File No. MH21091UST Spill ContainmentEQ-685Fairfield Industries, Inc.Daniel Clover973-483-01009/04/2007SCM-DFL, 5DG/16 Double-Wall Spill Containment ManholeApproved for use for spill containment for underground storage tanks in the State of Florida. The systems must be tested upon installation in accordance with Exhibit A, and Exhibit B.EQ-688S. Bravo System, Inc.Don Mukai323-888-412310/25/2007B-375-D Double-Wall Spill Containment BucketThe systems must be tested upon installation in accordance with Exhibit A.EQ-695Emco Wheaton Retail CorporationJohn Vautier407-625-833912/20/2007Emco Wheaton Secondary Spill Containment Model A1004-215, UL File no. MH21149The system is tested in accordance with Exhibit A prior to being placed into service and recorded in accordance with Rule 62- 761.710, F.A.C, requirements in Exhibit A attached with this Final Order.[Back to Categories]UST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-704Franklin Fueling SystemsAllan Busch608-838-87864/17/2008Franklin Fueling Systems Phil-Tite Model 40X-FS-XPR-Gray with TS-ULS sensor universal liquid sensor, UL File no. MH21091The system is tested in accordance with Exhibit A prior to being placed into service and the sensor is tested annually and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-708OPWGene Pope813-969-19005/23/2008OPW Edge 1-3100 Series Double Wall Spill Container, UL File no. MH27236The system is installed and tested in accordance with Exhibit A and Exhibit B prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-718OPWGene Pope813-969-19005/23/2008OPW Edge 1 Series Single-Wall Spill Container, UL File no. MH27236The system is installed and tested in accordance with Exhibit A prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-734JGD Associates, Inc.John Dzwonczyk440-933-68257/15/2009The Linebacker? and Linebacker?2 Spill Bucket LinersThe Linebacker? and Linebacker?2 Spill Bucket Liners must be installed and tested in accordance with Exhibit A and Exhibit B prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A and Exhibit B attached with this Final Order.[Back to Categories]UST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-735Petroleum Equipment Manufacturing Co.Joseph Petix305-558-99117/23/2009Pemco Model 112DW5 Double Wall Spill Containment ManholeThe system is installed and tested in accordance with Exhibit A prior to being placed into service and recorded in accordance with Rule 62-761.710, F.A.C, requirements in Exhibit A attached with this Final Order.EQ-741Emco Wheaton Retail CorporationJohn VautierWayne Boyd407-625-8339252-243-82619/29/2009 –1/08/2018-UpdateEmco Wheaton Secondary Spill Containment Model A1004-316/317 Series – 2018 New Model A1004-317SS, UL File No. MH21149Emco Wheaton Secondary Spill Containment Model A1004-316/317 Series, must be installed and tested in accordance with manufacturer’s instructions and Exhibit A prior to being placed into service and recorded in accordance with Rule 62- 761.710, F.A.C.EQ-753Emco Wheaton Retail CorporationJohn Vautier407-625-83392/25/2010Emco Wheaton A1005-505C Series Spill ContainmentThe initial testing is done in accordance with Exhibit A.EQ-757Franklin Fueling SystemsBradley Fawcett608-838-56507/27/2010Franklin Fueling Systems 705-540 series, single-walled, 705-550 doubled series with interstitial integrity gauge (I2), and 705-550 double-walled spill containment models with Incon-intelligent controls FFS Model TSP-ULS interstitial sensor, UL File no. MH21091Intrusion boot on the gravel guard has been changed from 602046001 to FEB-400-R (5/06/2013)Approved for use as a single or double-walled spill containment system for underground storage tanks with electronic interstitial monitoring or visual interstitial monitoring in the State of Florida, provided that the system is tested in accordance with Exhibit A and Exhibit B prior to being placed into service and the sensor is tested annually in accordance with Rule 62-761.710, F.A.C., requirements in Exhibit A attached with this Final Order, and the l2 monitoring system is tested monthly and annually and recorded monthly in accordance with Rule 62- 761.710, F.A.C., requirements in Exhibit A attached with this Final Order.[Back to Categories]UST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-762Pryco, Inc.Amanda Rankins217-364-44671/05/2011Pryco, Inc. – Remote Fill StationApproved in the State of Florida as a remote fill transfer point associated with UST or AST systems. Install per manufacturer’s instructions.EQ-764 JV & Associates, Inc.John Vautier407-625-83393/16/2011Emco Wheaton – Stainless Steel Spill containment insert for the A1005-505 SeriesApproved in the State of Florida as a double walled spill containment device for USTs and ASTs in the A1005-505 Series including other Department approved spill containment devices manufactured by Emco Wheaton (Rescinded 3/23/2011).EQ-764RJV & Associates, Inc.John Vautier407-625-83393/23/2011Emco Wheaton – Stainless Steel Spill containment insert for the A1005-XXXX SeriesApproved in the State of Florida as a double walled spill containment device for USTs and ASTs in the A1005-XXXX Series including other Department approved spill containment devices made by other manufacturers.EQ-776Mott-Smith Consulting Group, LLC Marshall Mott-Smith850-391-98358/24/2011Fibrelite Composites, Ltd., Fiberglass Sump Systems, Model Numbers: S45-1180; EL-G-E500; EL-G-LEG; S8CRD-390/WT; S8CRD-3100/MP/WSP-16-5; S8CRD-3100-OF/WSP-8-5; S/42-3100/MP16/SR-EXT/7-11; & S/42-3100/OF8/SR-EXT/7-11The installation of the sumps shall be made in accordance with the manufacturer’s recommendations. A structural integrity test that is in accordance with the manufacturer’s recommendations shall be conducted and passed before the sump is placed into operation.[Back to Categories]UST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-784Preferred Utilities MFG. Corp.Dexter Bullard203-743-67413/05/2012Spill Containment Devices, Horizontal Spill Container Model 2, and Sidewalk Spill Container Model 3For use with both ASTs and USTs. Installation and operation shall be made in accordance with the manufacturer’s recommendations.EQ-794Pope & Associates, Inc.Gene Pope813-969-190010/30/2012OPW 1-3100 Series 15 Gallon Edge? Double Wall Spill ContainerInstallation, maintenance and testing procedures shall be in accordance with the manufacturer’s recommendations.EQ-795Pope & Associates, Inc.Gene Pope813-969-190010/30/2012OPW 1-3700 Series Double Wall Edge? Field Replacement Kits for 500L and 700L Spill ContainersInstallation, maintenance and testing procedures shall be in accordance with the manufacturer’s recommendations.EQ-829Pope & Associates, Inc.Gene Pope813-969-19009/19/2014OPW 1-2200 Series Replaceable Single-Wall Spill ContainerThe installation and integrity testing procedures shall be made in accordance with the manufacturer’s recommendations.EQ-859Pope & Associates, Inc.Gene Pope813-969-190012/30/2015OPW Fibrelite Multiport Spill ContainersThe installation and maintenance of the spill containment devices must be in accordancewith the manufacturer’s recommendations as provided in Exhibit A.EQ-907S. Bravo Systems, Inc.Keith Pearson and Mamdouh Elsharkawy323-888-413311/16/2018S. Bravo Systems, Inc. UL Listed B800 Series Single-wall and Double-wall Commercial Transition SumpsThe installation, testing and maintenance must be in accordance with the manufacturer’s requirements in Exhibit A[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-223OPW Gene Pope813-969-190010/09/1995OPW 61SO Overfill Protection Valve, OPW 61TNG Overfill Protection Valve, OPW 53 Series Ball Float Valve, OPW 30MW Series Ball Float valveUST Overfill ProtectionEQ-300Universal Valve CompanyBill Tobias800-255-47839/29/1997Model 37 Float Vent Valve and V421 Vent Valve Assembly and Model 38 Float Vent Valve and V420 Vent ValveUST Overfill ProtectionEQ-370Scully Signal CompanyFrank Stemorzewski617-692-86003/12/1999ST-15 Series, ST-12, SP-M Series, SP-O Series, SP-TOM Series, SP-BL Series, SP-LD, and SP-H Overfill Protection UST Overfill ProtectionEQ-392Franklin Fueling SystemsAllan Busch608-838-87868/30/1999EBW Model 308 Float Vent ValveUST Overfill ProtectionEQ-414Emco Wheaton RetailJohn Vautier407-625-833912/22/1999Guardian A1100 Overfill ProtectionUST Overfill ProtectionEQ-414AEmco Wheaton RetailWayne Boyd252-243-82617/18/2018Guardian A1100E, A1100T and A1100TE Overfill PreventionUST Overfill Protection Additional Models to EQ-414EQ-464Franklin Fueling SystemsAllanBusch608-838-878610/25/2000Auto limiter IIUST Overfill Protection. The Department’s previous approval EQ-003, dated April 26, 1991, is hereby revoked due to the fact that the product is not being manufactured, and the company has requested that the order be revoked.EQ-475Preferred Utilities MFG. Corp.Peter Lavelle203-743-674111/29/2000TG-EL-D3 Leak Detection SystemUST Overfill ProtectionEQ-577Pneumercator Co., Inc.Jonathan Levy800-209-78582/09/2004Pneumercator LS600 Series Liquid Level FloatAST Overfill ProtectionEQ-579Universal Valve Company, Inc.Pete Mascis908-351-06062/27/2004Universal 39-04 Overfill Protection ValveUST Overfill ProtectionEQ-606OPW Fueling Containment Systems (Formerly Environ Products, Inc.)Kevin Webster919-464-3640Ext. 11012/21/2004Float Vent Valve Part No. FVV-3210UST Overfill ProtectionUST/ Overfill Protection (Vent Restrictors such as ball float valves cannot be installed after January 11, 2017)UST/ Overfill Protection (Continued) (Vent Restrictors such as ball float valves cannot be installed after January 11, 2017)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-697OPW Gene Pope813-969-190012/21/2007OPW UL Listed Vapor Tight Overfill Protection Valve, Model No. 71SO, UL File No. MH 21147The systems must be installed and tested upon installation in accordance with Exhibit A, and at least once on an annual basis in accordance with Exhibit A, for Rule 62-762.701, F.A.C., annual operability requirements.EQ-698Omntec Mfg., Inc.Tara Traganas631-981-20011/10/2008Omntec L- Series sensors when used with associated controllers LPD, LU and OEL 8000Approved in the State of Florida for overfill protection of underground storage tanks and overfill protection of aboveground storage tanks provided the tanks are not filled beyond 95%of nominal capacity. The systems must be tested upon installation, and at least once on annual basis in accordance with Exhibit A, and Exhibit B, for Rule 62-762.701, F.A.C., annual operability requirements.EQ-705Pneumercator Co., Inc.Jonathan Levy800-209-78584/24/2008The Pneumercator ModelLS600/LS600A Series and Model LS600/LS600A NCL series Float Sensors for use with Pneumercator LC1000 and LC2000 series Alarm Panels, PC1000 series Pump Controllers and TMS Series Tank Management SystemsA copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the State of Florida.[Back to Categories]UST/ Overfill Protection (Continued) (Vent Restrictors such as ball float valves cannot be installed after January 11, 2017)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-780Preferred Utilities MFG. Corp.Dexter Bullard203-743-67412/14/2012Tank Fil-A-Larm Switch Model SDI-HLS; Tank Gauge Model SDI-TG-EL-D5; Discriminating Sensor Models SDI-HD-A2-C & SDI-HD-A2-C-8All products are approved as either overfill protection or release detection devices associated with ASTs or USTs. Installation and operation shall be made in accordance with the manufacturer’s recommendations. EQ-783Preferred Utilities MFG. Corp.Dexter Bullard203-743-67413/05/2012Tank Gauge Model SDI-TG-EL-D4A and [Discriminating Sensor Models SDI-HD-A2-C & SDI-HD-A2-C-8 (see EQ-780)]All products are approved as either overfill protection or release detection devices associated with ASTs or USTs. Installation and operation shall be made in accordance with the manufacturer’s recommendations. EQ-815Pope & Associates, Inc.Gene Pope813-969-190010/8/2013OPW 71SO-T Series “Testable” Overfill Prevention Valve (also see EQ-697)The installation and operation shall be in accordance with the manufacturer’s recommendations. EQ-817FPI Sensors LLCCustomer Service972-241-2161CustomerService@ 1/13/2014Updated9/27/2019FPI Sensors International Model Numbers: LD 1001 Generic Leak Detection System – LD FPI BB15; CL 1001 Generic Continuous Level 4-20 mA Sensor – LD FPI SP15; LS 1001 Generic Level Float Switch – LD FPI SP12Release detection sensors for monitoring secondary containment systems associated with USTs and ASTs and for an associated float switch associated with the sensors. EQ-817 covers overfill protection devices when connected to an operator alarm.EQ-819Preferred Utilities MFG. Corp.Dexter Bullard203-743-67413/24/2014Overfill Protection Devices: Liquid Level Switch, Model PLS and Overfill Models FA-AV and FA-AV-D3The installation and operation shall be in accordance with the manufacturer’s recommendations. EQ-831Component Specialists, Inc.Marty Hendrickx815-623-732610/17/2014Fozmula Limited G/LL65 Liquid Level Contents Gauge, T/LL200 Series Liquid Level Sensor, G/LL64 Liquid Level Contents Gauge, and T/LL130 Liquid Level SensorDevices may be used as part of the overfill protection device so long as the product level information is provided to the product transfer operator. Department approval for inventory management purposes is not required.[Back to Categories]UST/ Overfill Protection (Continued) (Vent Restrictors such as ball float valves cannot be installed after January 11, 2017)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-832Advanced Control Technology, Inc.John Tate877-800-882010/17/2014Advanced Control Technology, Inc. 10 Series Miniature Fluid Level SwitchesDevices may be used as part of the overfill protection device so long as the product level information is provided to the product transfer operator. Department approval for inventory management purposes is not required.EQ-838-RFranklin Fueling SystemsSandra Adams608-838-56681/14/20155/5/2017-RevisedFranklin Fueling Systems Defender Series? Overfill Prevention Valve – RevisedThe installation, operation and maintenance shall be in accordance with the manufacturer’s recommendations.EQ-854Design By InitiativeReid McLean404-996-128211/09/2015SMD Fluid ControlsFuelogic Model FS and Models FM Float Switches for Overfill Protection and ReleaseMay be used as part of an overfill protection device or a release detection sensor for underground and aboveground storage tank systems. The installation, operation, and maintenance procedures shall be made in accordance with the manufacturer’s recommendations.EQ-858Morrison Brothers Co.Jerry Schollmeyer800-553-484012/07/20155/15/2019Morrison Brothers Co.Model 9095X Series and Model 9095 SA and 9095 SS Series Overfill Protection ValvesMay be used as overfill protection devices for underground and aboveground storage tank systems The installation and maintenance of the overfill protection devices must be in accordance with the manufacturer’s recommendations.EQ-862Morrison Brothers Co.Jerry Schollmeyer800-553-48402/01/2016Morrison Brothers Co. Model 924 & 924S, 924LS, 925 & 925S Series Liquid SensorsThe installation and maintenance shall be made in accordance with the manufacturer’s recommendations.EQ-863Pope & Associates, Inc.Gene Pope813-969-1900 3/04/2016OPW SiteSentinel?Nano? Console Tank Gauge, Probes and SensorsMay be used as an automatic tank gauge, as an approved overfill protection device when equipped with an alarm, and as an interstitial release detection device for secondary containment systems for underground and aboveground storage tank systems.[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-867Solutions with Innovation, LLCThomas Williams203-729-64346/27/2016L170-0101-3002 and L007-0402-0203 Series Liquid Level SwitchesFor overfill protection, the switch will be set at a specified liquid level in the storage tank and an alarm will be provided to the transfer operator. For interstitial release detection, the switch will be placed on the low area of the secondary containment interstice that is being monitored that will alarm when liquid is detected.EQ-868Morrison Brothers Co.Jerry Schollmeyer800-553-484012/16/2016Models 918SB, 918DB, and 918QB Series AlarmsMay be used as a visible and audible alarm for overfill protection devices or release detection sensors for aboveground and underground storage tank systems, in accordance with the requirements of Chapter 62-761, and Chapter 62-762, F.A.C.EQ-877Veeder-RootTech SupportCustomer Svc800-323-1799888-561-79425/19/2017Veeder-Root Overfill Alarm and Acknowledgement SwitchThe installation and maintenance shall be in accordance with the manufacturer’s recommendation. Registered for UST or AST overfill protection.EQ-887OPW Fuel Management SystemsGene Pope813-431-20092/06/2018OPW SiteSentinel? Integra 100? and 500? Automatic Tank Gauging SystemMay be used as an automatic tank gauge, as an approved overfill protection device when equipped with an alarm, and as an interstitial release detection device for secondary containment systems for underground and aboveground storage tank systems.EQ-893Endress+HauserDean Mallon317-530-18204/02/2018Endress+Hauser FTL5x-xx Level SwitchFor use with UST and AST systems as liquid detector and overfill protection. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.UST/ Overfill Protection (Continued) (Vent Restrictors, such as ball float valves, cannot be installed after January 11, 2017)[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-897Flowline IncorporatedAdrian TottenJesus Aureoles862-598-3015 919-656-54025/31/2018Flowline Echopulse & Echopro Pulse Radar – Model Numbers: LR10, LR11, LR15, LR16, LR20, LR21, LR25, LR26, LR30, LR31For use with UST and AST systems as liquid detector and overfill protection. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-898Franklin Fueling SystemsSandra Adams800-225-97876/18/2018Franklin Fueling Systems TS-RA1 and TS-RA2 remote audible and visible alarm units. TS-RA2 for high background noise. TS-RK unit is a remote alarm acknowledgement unit for use with TS-RA1 and TS-RA2Installation and programming requires a Franklin Fueling Certified Technician. For use in conjunction with Franklin Fueling SystemsT5, T550, T5000, T550evo, T5000evo, EVO200 and EVO400 ATG’s, and operation and maintenance in accordance with manufacturer’s requirements.EQ-917Pneumercator Co., Inc.Jonathan Levy631-293-84506/03/2019LC2000 Series Leak/Point-Level Alarm Console – used with the following Pneumercator leak sensor models: ES825-100F/XF/CF, ES825-200F/XF, LS600LDxx Series, LS610, RSU80x Series, RSU810; and with the following Point-Level Overfill sensors: LS600 SeriesFor use with both USTs and ASTs. The installation must be inspected and started up by a Pneumercator-certified technician. Testing and maintenance shall be made in accordance with the manufacturer’s requirements.UST/ Overfill Protection (Continued) (Vent Restrictors, such as ball float valves, cannot be installed after January 11, 2017)AST/ Spill Containment DevicesFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-155AContainment Solutions, Inc.David Dooley410-756-28882/18/2011Spill containment device for UL 142 ASTs manufactured by Containment Solutions, Inc.Approved in the State of Florida as a spill containment device attached to UL 142 ASTs approved under EQ-155 manufactured by Containment Solutions, Inc.EQ-226OPW Gene Pope813-969-190010/25/1995Pomeco 6200 Series AST and Pomeco 6211 RMOT Remote Series (previously listed as Pomeco 211 AST and Pomeco 211 RMOT Remote)AST Spill ContainmentEQ-244Baker Industries Northwest, Inc.Ben Daines425-212-31694/08/1996Updated8/02/2019#700/#800 Series Ground Level spill containment from 4.76 to 31 gallons.Installation and operation shall be in accordance with the manufacturer’s recommendations.EQ-256Clay & Bailey Mfg. Co.Brad Holmes800-821-65835/14/1996#6100 series Spill containment BoxesAST Spill ContainmentEQ-299Universal Valve CompanyBill Tobias800-255-47839/29/1997Model 76 Aboveground Spill Containment Manhole and the Model 76RF Aboveground Remote Fill Spill Containment ManholeAST Spill ContainmentEQ-345Morrison Bros. Co.Jerry Schollmeyer800-553-484011/02/1998Morrison 517 & 518 A.S.T. Spill ContainersAST Spill ContainmentEQ-349JCL Enterprises of Central FloridaJames Porter941-452-006812/01/1998A.S.T. Spill ContainersAST Spill ContainmentEQ-366PWH Equipment and Services Company, Inc.James Hudson813-623-20773/03/1999Free Standing Ground Level Fill Containment Model DUOGFL and DUOGFL2EQ-437Fairfield Industries, Inc.Mark Sisco973-228-34485/08/2000Fairfield Industry Models RFP, AFRP, and AGSCAST Spill ContainmentEQ-463Petroleum Equipment Manufacturing CO., Inc. (PEMCO)Adele Azcuy305-558-991110/23/2000Model 113 Above ground Containment Manhole and associated Model 125 Spill MateAST Spill Containment[Back to Categories]File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-474AContainment Solutions, Inc.David Dooley410-756-28882/18/2011Spill containment devices for UL 142 and UL2085 ASTs manufactured by Containment Solutions, Inc.Approved in the State of Florida as a spill containment device attached to ASTs approved under EQ-474 manufactured by Containment Solutions, Inc.EQ-481Simplex, Inc.David Hurtado386-690-63612/21/2001Simplex Fuel PortAST Spill ContainmentEQ-535Morrison Bros. Co.Jerry Schollmeyer800-553-48407/03/2002Morrison Model 515 Remote fill Spill Containment for ASTAST Spill ContainmentEQ-629Franklin Fueling SystemsAllan Busch608-838-87861/17/2006EBW model number 706-420 Aboveground Spill ContainerAST Spill ContainmentEQ-725Morrison Bros. Co.Jerry Schollmeyer800-553-484012/29/2008Morrison model number 516 series AST Spill Container UL File number MH21154AST Spill ContainmentEQ-726Malo IncorporatedAndrew Carroll414-840-78331/15/2009Malo Overspill Bowl Model number AL7.5 and AL5 SeriesAST Spill ContainmentAST/ Spill Containment Devices (Continued)[Back to Categories]AST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-740Clay & Bailey Mfg. Co.Brad Holmes800-821-65839/28/2009Clay & Bailey Spill Containment 6100Series, UL File No. MH 47031The Clay & Bailey Spill Containment 6100Series UL File No. MH 47031 must be installed and tested in accordance with Exhibit A prior to being placed into service and recorded in accordance with Rule 62-762.711, F.A.C, requirements in Exhibit A attached with this Final Order.EQ-746Zierke Built Manufacturing, Inc.LeRoy Larson800-269-22222/12/2010Zierke Spill Containment BoxThe Zierke Spill Containment Box must be installed and tested in accordance with Exhibit A prior to being placed into service and recorded in accordance with Rule 62-762.711, F.A.C., requirements in Exhibit A attached with this Final Order.EQ-762Pryco, Inc.Amanda Rankins217-364-44671/05/2011Pryco, Inc. – Remote Fill StationApproved in the State of Florida as a remote fill transfer point associated with UST or AST systems. Install per manufacturer’s instructions.EQ-763Modern Welding of Florida, Inc.Jeff Herter407-843-12703/09/2011Modern Welding Co. – Spill/Fill Box Containment Device, Model 6B1568-37, for UL 142 and UL2085 ASTs manufactured by Modern Welding Co.Approved in the State of Florida as a spill/fill box containment device attached to Modern Welding Company’s UL 142 and UL 2085 AST.[Back to Categories]AST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-764 JV & Associates, Inc.John Vautier407-625-83393/16/2011Emco Wheaton – Stainless Steel Spill containment insert for the A1005-505 SeriesApproved in the State of Florida as a double walled spill containment device for USTs and ASTs in the A1005-505 Series including other Department approved spill containment devices manufactured by Emco Wheaton (Rescinded 3/23/2011).EQ-764RJV & Associates, Inc.John Vautier407-625-83393/23/2011Emco Wheaton – Stainless Steel Spill containment insert for the A1005-XXXX SeriesApproved in the State of Florida as a double walled spill containment device for USTs and ASTs in the A1005-XXXX Series including other Department approved spill containment devices made by other manufacturers.EQ-767Cab Construction, Inc.Paul Schley507-625-22335/17/2011CAB Construction – Spill Box Model Numbers 52594-R and 52594-SAST Spill ContainmentEQ-770Petroleum Equipment Manufacturing CompanyJoseph Petix305-558-99116/23/2011Spill Mate Models 125XFP20 and 125FPV20Installation and operation shall be in accordance with the manufacturer’s recommendations.[Back to Categories]AST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-778Fidelity Manufacturing, LLC. Mark Stromwall352-414-470011/07/20112/27/2019 UpdatedFidelity Manufacturing, LLC – 7.5 Gallon Spill Bucket for ASTs (updated to include stainless steel as an option)The 7.5 Gallon Spill Bucket is approved in the State of FL as a spill containment device associated with aboveground storage tanks, primarily their double-walled sub-base generator aboveground tanks that were approved under EQ-497. Installation shall be in accordance with the manufacturer’s recommendations.EQ-784Preferred Utilities MFG. Corp.Dexter Bullard203-743-67413/05/2012Spill Containment Devices, Horizontal Spill Container Model 2, and Sidewalk Spill Container Model 3For use with both ASTs and USTs. Installation and operation shall be made in accordance with the manufacturer’s recommendations.EQ-787Morrison Bros. Co.Jerry Schollmeyer800-553-48405/10/2012Morrison Bros. Co. Spill Container, Model Number 715 Series, UL File No. MH17926Installation, operation and testing shall be made in accordance with the manufacturer’s recommendationsEQ-814Pope & Associates, Inc.Gene Pope813-969-19009/26/2013OPW 300 Series Aboveground Spill Containers – Models POMECO/OPW 331AST & 332ASTThe installation and operation shall be in accordance with the manufacturer’s recommendations. EQ-849Fuel Tech, Inc.Ed Fogle800-628-18637/22/2015Fuel Tech Inc.3in Spill Box for Aboveground Storage TanksThe 3in Spill Box for ASTs shall be tested at installation by filling the spill box with water above the piping penetration fitting and observing the spill box and penetration is liquid tight.[Back to Categories]AST/ Spill Containment Devices (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-874Clay & Bailey Mfg. Co.Brad Holmes800-821-65834/28/2017Clay & Bailey Spill Containment 6100 Series, 5 and 7.5 gallon. UL File No. MH25085 series Aboveground Spill Container for shop-fabricated AST SystemsMust be installed and tested in accordance with Exhibit A prior to being placed into service. EQ-879Clay & Bailey Mfg. Co.Brad Holmes800-821-65837/10/2017Clay & Bailey Genset Spill Containment Box, 5-gallon Generator Base Tank Spill Container. Model # 6100-09-4600 UL File No. MH25085Must be installed and tested in accordance with Exhibit A prior to being placed into service. EQ-882Clay & Bailey Mfg. Co.Brad Holmes800-821-658312/01/2017Clay & Bailey Spill Containment 6100 Series, Spill Box 7.5 Gallon Genset Spill Containment Box with Female Connection. Model 6100-09-1752FRB.Must be installed and tested in accordance with Exhibit A prior to being placed into service. EQ-921Triple B Supply, Inc.Doug Boesdboes@9/25/2019Triple B Supply, Inc. 3.5 Gallon Direct Fill Containment Box – Model TBS35The installation, testing, and operation shall be in accordance with the manufacturer’s recommendations. [Back to Categories]AST/ Overfill Protection File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-225OPW Gene Pope813-969-190010/25/1995OPW 61F-Stop Overfill Prevention ValveAST Overfill ProtectionEQ-227Morrison Bros. CoJerry Schollemeyer800-553-484010/25/1995AST Overfill AlarmAST Overfill ProtectionEQ-234Vaporless Manufacturing, Inc.Steve Wilson800-367-018512/11/1995OFP-2/1, OFP-2/2, OFP-3/1, and OFP-3/2 Overfill protection ValveAST Overfill ProtectionEQ-257Clay & Bailey Mfg. Co.Brad Holmes800-821-65835/09/1996Solo Overfill Protection Valve #1228, The Overfill Protection Valve, Model Number, F-30, F-35, F-40 and the Mino Filling Limiter #1228. AST Overfill ProtectionEQ-301Universal Valve CompanyBill Tobias800-255-47839/29/1997Model 49-02, Model 49-04 Aboveground Overfill Protection and Model HL-TA Aboveground Overfill Alarm Tank MonitorAST Overfill ProtectionEQ-355K-Tek CorporationThomas Crnko225-673-610012/17/1998SPM 100 and SPM 200 SeriesAST Overfill ProtectionEQ-356Morrison Bros. Co.Jerry Schollmeyer800-553-484012/17/19989095A Overfill Protection ValveAST Overfill ProtectionEQ-370Scully Signal CompanyFrank Stemorzewski617-692-86003/12/1999ST-15Series, ST-12, SP-M Series, SP-O Series, SP-TOM Series, SP-BL Series, SP-LD,And SP-H Overfill Protection DevicesAST Overfill ProtectionEQ-379Enraf, Inc.Robert Arias281-443-42916/15/1999Enraf 873 SmartRadar, and the 854 Servo Level GaugeAST Overfill ProtectionEQ-384Endress+Hauser Coggins SystemRichard Entralgo281-480-52738/24/1999Whessoe Varec/ Sakura Endress Proservo NMS Series and Promonitor NRF 560AST Overfill Protection[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-388Magnetrol InternationalScott Stewart630-969-40008/30/1999Buoyancy Technology EZ Modulevel Pnumatic Modulevel External Cage Displacer Side Mount Top Mount High Pressure Tuffy Capacitance Technology Tip Sensitive 810 811 80/81 82 CE Sentinel 822 Sentinel 832 Sentinel 842 801 804Contact Ultrasonic 910 911/921 91S/92S 919 915 916 918 91E Non-Contact Ultrasonic 352 350/351 341 344 300/301 3P1Magnetostrictive MicrotelThermal Dispersion MicrotelGuided Wave Radar EclipseAST Overfill ProtectionEQ-389Trans Data Corp., Division of Fournier Associates, Inc.John Wehler516-223-48408/30/1999Series 6761, Series 6693, and Series 6699AST Overfill ProtectionEQ-393Enraf, Inc.Robert Arias281-443-42918/30/1999Enraf Alarm Scout and 744 Alarm Controller/ 748 IR ProbeAST Overfill Protection[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-396Drexelbrook Engineering CompanyJack Roushey215-674-12349/02/1999Drexelbrook LCT and VeriGap Level DetectorAST Overfill ProtectionEQ-404Omntec Mfg., Inc. (Formerly Innovative Sensor Solution Ltd.)Tara Traganas631-981-200111/16/1999FillCheck? overfill protection devicesAST Overfill Protection, Conditional ApprovalEQ-406Milltronics, Inc.Doug Duncan817-277-354311/23/1999Milltronics Ultrasonic Level Measuring SystemsAST Overfill ProtectionEQ-408L & J Engineering CompanyLarry Grygienc708-236-600012/14/1999MCG 1090 line of high-level alarms and the Omnitrol line of level controlsAST Overfill ProtectionEQ-411Morrison Bros. Co.Jerry Schollmeyer800-553-484012/22/1999Model 1018 Aboveground Storage Tank GaugeAST Overfill ProtectionEQ-435Delta Controls CorporationRandy Wyatt318-424-84715/08/2000Delta Models 709, and 715 Aboveground Storage Tank GaugeAST Overfill ProtectionEQ-456Intelligent Controls, Inc.Kevin Devinney207-283-015610/04/2000HIS, HLS, ULS, DIS, EIS, PS, DDS, DTS, and MWS interstitial liquid sensorsAST Overfill and Liquid Leak DetectorEQ-464Franklin Fueling SystemsAllan Busch608-838-878610/25/2000709 Warden overfill prevention valveAST Overfill ProtectionEQ-488Meco, Inc.Kenneth Mroz619-466-14694/18/2001MecoAlarm SystemAST Overfill ProtectionEQ-527Morrison Bros. Co.Jerry Schollmeyer800-553-48404/19/2002Morrison 918 AST Clock Gauge with an Alarm SystemThe system is approved for overfill prevention for aboveground storage tanks up to 12 feet in diameter for horizontal tanks, and up to 12 feet in height for vertical tanks.[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-536Morrison Bros. Co. Jerry Schollmeyer800-553-48408/05/2002Morrison 918CP AST Alarm SystemApproved for overfill prevention for aboveground storage tanks up to 50 feet in height in the State of Florida.EQ-548Gauging Systems, Inc.Ana Figueroa800-444-132712/20/2002GSI-HIAS Overfill Alarm SystemA copy of this order shall be distributed to any facility that uses this product. A copy of annual operability test shall be given to any tank owner purchasing or using this system In the State of Florida.EQ-570Robetshaw Industrial ProductsDave Cahill865-981-311312/22/2003Centeron Level Alarm SystemAST Overfill ProtectionEQ-576Morrison Bros. Co.Jerry Schollmeyer800-553-48402/09/2004Morrison FMM ASO ValveAST Overfill ProtectionEQ-577Pneumercator Co., Inc.Jonathan Levy800-209-78582/09/2004Pneumercator LS600 Series Liquid Level FloatAST Overfill ProtectionEQ-610OPW Gene Pope813-969-19004/11/2005OPW 144TA & 444TA High Level Tank AlarmAST Overfill ProtectionEQ-637Guillotine, Inc.Don Shackelford800-824-13943/30/2006UL Listed Guillotine Flow Restrictor, UL File Number MH18426AST Overfill Protection[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-576 AmendmentSamson CompanyJerry Schollmeyer800-553-48401/26/2007ASO Valve # OA-1AST Overfill Protection Samson Company’s product Valve # OA- that is identical to Morrison FMM ASO Valve which was approved in the original Order. The Samson Valve OA-1 has been manufactured since February 9, 2004 is approved to be installed after the effective date of this amended Order. The valve must have the marking or labeling states: Model Samson # OA-1, ULC Listed, and MANUFACTURED BY MORRISON BROS.EQ-669Clay & Bailey Mfg. Co.Brad Holmes800-821-65834/18/2007UL Listed Clay & Bailey Overfill Prevention Valves Model Numbers 1228-03-2200 2”, and 1228-03-2400 4”, UL File Number MH25085The use of the UL Listed Clay & Bailey Overfill Prevention Valves Model Numbers 1228-03-2200 2”, and 1228-03-2400 4”, UL File Number MH25085, is approved for overfill prevention for aboveground storage tanks in the State of Florida, provided the tank is equipped with tight fill connections and is not filled beyond 95% of nominal capacity.EQ-682Madison CompanySteven Hilaire203-488-4477Ext. 1019/16/2007M7000 Vertical Mount, Single Point Level Switch, PBT Stem & Buna N Float, SPST 30VA Switch, M7700Horizontal Mount, Single Point Level Switch, PBT Stem & Float, SPST 30VA Switch, M8700 Horizontal Mount, Single Point Level Switch, Polypropylene Stem and Float, SPST 30VA SwitchConditional Approval[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-696Morrison Bros. Co.Jerry Schollmeyer800-553-484012/27/2007UL Listed Morrison Bros. Overfill Prevention Valve Model Number 9095S, UL File Number MH21138The tank is equipped with tight fill connections and is not filled beyond 95% of nominal capacity. The systems must be installed and tested upon installation in accordance with Exhibit A, and at least once on annual basis in accordance with Exhibit A, for Rule 62-762.701, F.A.C., annual operability requirements.EQ-698Omntec Mfg., Inc.Tara Traganas631-981-20011/10/2008Omntec L- Series sensors when used with associated controllers LPD, LU and OEL 8000Approved in the State of Florida for overfill protection of underground storage tanks and overfill protection of aboveground storage tanks provided the tanks are not filled beyond 95% of nominal capacity. The systems must be tested upon installation, and at least once on annual basis in accordance with Exhibit A, and Exhibit B, for Rule 62-762.701, F.A.C., annual operability requirements.EQ-705Pneumercator Co., Inc.Jonathan Levy800-209-78584/24/2008The Pneumercator Model LS600/LS600A Series and Model LS600/LS600A NCL series Float Sensors for use with Pneumercator LC1000 and LC2000 series Alarm Panels, PC1000 series Pump Controllers and TMS Series Tank Management SystemsA copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the State of Florida.[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-706Simplex, Inc.David Hurtado386-690-63615/08/2008Updated6/04/2020Automatic Fuel Port Series Model CAFP-x and AFP-x, and multi-versions. AFC Automatic Fill Controller (formerly – TC 9 Tank Commander); AFC Automatic Fill Controller (formerly TC-9 Tank Commander) with Automatic Fuel Port Series Model CAFP-x, and AFP-x, and multi-versions; AFC Automatic Fill Controller (formerly TC-9 Tank Commander) with Smart Pump Series Model SP-x, multi-versions; and AFC Automatic Fill Controller (formerly TC-9 Tank Commander) with Mini-Smart Pump Series Model MSP-x)This product is equipped with the FuelPort Spill Containment that was approved under the Department File EQ-481. The used of the Pneumercator LS 600, LS 601, and RSU 800 approved under EQ-240 is acceptable to be used with this product. A copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the State of Florida.EQ-713Greenleaf GaugeBrad Holton888-884-28438/18/2008Greenleaf Gauge Model EFG-8000 Overfill ProtectionA copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the State of Florida.EQ-730Krueger Sentry GaugeLee Geurts920-434-8860 x 2043/26/2009Updated9/11/2019Krueger Therma Gauge, Overfill Alert Gauge, and At A Glance Direct Reading Gauge (Types H, O, and D)A copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the State of Florida. The annual operability test shall be done in accordance of Exhibit A attached to the Final Order. Type D installations and maintenance must follow updated instructions provided in this file.AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-732Simplex, Inc.David Hurtado386-690-63615/11/2009Simplex SST ControllerThe use of the Pneumercator LS 600, LS 601, and RSU 800 approved under EQ-240 is acceptable to be used with this product. A copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the State of Florida.EQ-743Fozmula LimitedChris HandsUK +44(0)1926 46670011/10/2009T/LL70 Float Switch and the T/LL 140 series sensorA copy of this Order shall be distributed to any facility that uses this product. A copy of the annual operability test shall be given to any tank owner purchasing or using this system in the State of Florida.EQ-780Preferred Utilities MFG. Corp.Dexter Bullard203-743-67412/14/2012Tank Fil-A-Larm Switch Model SDI-HLS; Tank Gauge Model SDI-TG-EL-D5; Discriminating Sensor Models SDI-HD-A2-C & SDI-HD-A2-C-8Products are approved as either overfill protection or release detection devices associated with ASTs or USTs. Installation and operation shall be made in accordance with the manufacturer’s recommendations.EQ-783Preferred Utilities MFG. Corp.Dexter Bullard203-743-67413/05/2012Tank Gauge Model SDI-TG-EL-D4A and [Discriminating Sensor Models SDI-HD-A2-C & SDI-HD-A2-C-8 (see EQ-780)]All products are approved as either overfill protection or release detection devices associated with ASTs or USTs. Installation and operation shall be made in accordance with the manufacturer’s recommendations. [Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-805Fozmula LimitedMarty Hendrickx815-623-7326 or UK +44(0)1926 4667004/03/2013Fozmula Limited T/LL350 Float Switch Fuel Level Sensor for ASTs Installation and operation of the liquid level sensor shall be made in accordance with the manufacturer’s procedures. Does not require recalibration to stored fuel type like EQ-743 – T/LL 140 series.EQ-807Mott-Smith Consulting Group, LLCMarshall Mott-Smith850-391-98354/18/2013Husky Corporation 007 product line; Jarhead product line; Leak Guard product line; Black Knight product line; Red Fox product line and Sentry product line for Aboveground Storage Tank SystemsApproved in the State of Florida as product level sensors that could provide high level information for overfill protection and for product inventory information for AST systems. Intended to be used with medium and heavy distillates and not intended for use with light distillates such as unleaded gasoline. The installation and operation shall be in accordance with the manufacturer’s recommendations.EQ-817FPI Sensors LLCCustomer Service972-241-2161CustomerService@ 1/13/2014Updated9/27/2019FPI Sensors International Model Numbers: LD 1001 Generic Leak Detection System – LD FPI BB15; CL 1001 Generic Continuous Level 4-20 mA Sensor – LD FPI SP15; LS 1001 Generic Level Float Switch – LD FPI SP12Release detection sensors for monitoring secondary containment systems associated with USTs and ASTs and for an associated float switch associated with the sensors. EQ-817 covers overfill protection devices when connected to an operator alarm.EQ-819Preferred Utilities MFG. Corp.Dexter Bullard203-743-67413/24/2014Overfill Protection Devices: Liquid Level Switch, Model PLS and Overfill Models FA-AV and FA-AV-D3The installation and operation shall be in accordance with the manufacturer’s recommendations. EQ-831Component Specialists, Inc.Marty Hendrickx815-623-732610/17/2014Fozmula Limited G/LL65 Liquid Level Contents Gauge, T/LL200 Series Liquid Level Sensor, G/LL64 Liquid Level Contents Gauge, and T/LL130 Liquid Level SensorDevices may be used as part of the overfill protection device so long as the product level information is provided to the product transfer operator. Department approval for inventory management purposes is not required.[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-832Advanced Control Technology, Inc.John Tate877-800-882010/17/2014Advanced Control Technology, Inc. 10 Series Miniature Fluid Level SwitchesDevices may be used as part of the overfill protection device so long as the product level information is provided to the product transfer operator. Department approval for inventory management purposes is not required.EQ-840Emerson Process Management-Rosemount Tank Gauging DivisionCarl-Johan Roos+46-31-33701442/02/2015Emerson Process Management-Rosemount Tank Gauging SystemThe installation, operation, and maintenance procedures shall be made in accordance with the manufacturer’s recommendations.EQ-851Morrison Bros. Co.Jerry Schollmeyer800-553-484010/23/2015Morrison Bros. Co. 2 inch and 3-inch Model 9095AA Series of Overfill Prevention ValvesThe installation, operation, and maintenance procedures shall be made in accordance with the manufacturer’s recommendations.EQ-854Design By InitiativeReid McLean404-996-128211/09/2015SMD Fluid ControlsFuelogic Model FS and Models FM Float Switches for Overfill Protection and ReleaseMay be used as part of an overfill protection device or a release detection sensor for underground and aboveground storage tank systems. The installation, operation, and maintenance procedures shall be made in accordance with the manufacturer’s recommendations.EQ-858Morrison Brothers Co.Jerry Schollmeyer800-553-484012/07/20155/15/2019Morrison Brothers Co.Model 9095X Series and Model 9095 SA and 9095 SS Series Overfill Protection ValvesMay be used as overfill protection devices for underground and aboveground storage tank systems. The installation and maintenance of the overfill protection devices must be in accordance with the manufacturer’s recommendations.EQ-861Morrison Brothers Co.Jerry Schollmeyer800-553-48402/01/2016Morrison Brothers Co.Model 918DP Clock GaugeThe installation and maintenance of the clock gauge shall be made in accordance with the manufacturer’s recommendations.EQ-862Morrison Brothers Co.Jerry Schollmeyer800-553-48402/01/2016Morrison Brothers Co. Model 924 & 924S, 924LS, 925 & 925S Series Liquid SensorsThe installation and maintenance shall be made in accordance with the manufacturer’s recommendations.[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-863Pope & Associates, Inc.Gene Pope813-969-1900 3/04/2016OPW SiteSentinel?Nano? Console Tank Gauge, Probes and SensorsMay be used as an automatic tank gauge, as an approved overfill protection device when equipped with an alarm, and as an interstitial release detection device for secondary containment systems for underground and aboveground storage tank systems.EQ-867Solutions with Innovation, LLCThomas Williams203-729-64346/27/2016L170-0101-3002 and L007-0402-0203 Series Liquid Level SwitchesFor overfill protection, the switch will be set at a specified liquid level in the storage tank and an alarm will be provided to the transfer operator. For interstitial release detection, the switch will be placed on the low area of the secondary containment interstice that is being monitored that will alarm when liquid is detected.EQ-868Morrison Brothers Co.Jerry Schollmeyer800-553-484012/16/2016Models 918SB, 918DB, and 918QB Series AlarmsMay be used as a visible and audible alarm for overfill protection devices or release detection sensors for aboveground and underground storage tank systems, in accordance with the requirements of Chapter 62-761, and Chapter 62-762, F.A.C.EQ-872Morrison Brothers Co.Jerry Schollmeyer800-553-48403/06/2017Models 1218C Console & 1218S SensorFollow manufacturer’s instructions.EQ-873Morrison Brothers Co.Jerry Schollmeyer800-553-48404/26/2017Model 818 Series Clock GaugesTo be used for overfill protection, the Model 818 Series gauges must be visible and facing the product transfer operator, it must be clearly marked at 90% capacity and cannot be filled over that amount. All overfill protection devices require annual operability test. Follow manufacturer’s instructions.EQ-877Veeder-RootTech SupportCustomer Svc800-323-1799888-561-79425/19/2017Veeder-Root Overfill Alarm and Acknowledgement SwitchThe installation and maintenance shall be in accordance with the manufacturer’s recommendation. Registered for UST or AST overfill protection.[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-878Endress+HauserGene Henry888-363-73778/01/2017Endress+Hauser Overfill Prevention System – Models SOPX00. The installation and maintenance shall be in accordance with the manufacturer’s recommendation. Registered for AST overfill protection. Meets API 2350 requirements.EQ-883Clay & Bailey Mfg. Co.Brad Holmes800-821-658312/11/2017Clay & Bailey Overfill Protection Valves Model Numbers 1228-03-22XX, 24XX, and 25XX UL File Number MH25085The use of the UL Listed Clay & Bailey Overfill Prevention Valves Model Numbers 1228-03-2200 2”, 1228-03-2400 4”, 1228-03-2500 5” UL File Number MH25085, is approved for overfill prevention for aboveground storage tanks in the State of Florida, provided the tank is equipped with tight fill connections and is not filled beyond 95% of nominal capacity. See also EQ-669.EQ-885KUS-USA, Inc.Alan Cartwright954-463-10751/04/2018KUS-USA, Inc. Sensor Series Models SSS and SSL Fuel/Water Level Sensors The installation and maintenance shall be in accordance with the manufacturer’s recommendation. If not using the high-level alarm option, to be used for overfill protection, the sending unit gauge must be visible and facing the product transfer operator. Fuel transfer must stop at Full which is 90% capacity and cannot be filled over that amount. All overfill protection devices require annual operability test.EQ-887OPW Fuel Management SystemsGene Pope813-431-20092/06/2018OPW SiteSentinel? Integra 100? and 500? Automatic Tank Gauging SystemMay be used as an automatic tank gauge, as an approved overfill protection device when equipped with an alarm, and as an interstitial release detection device for secondary containment systems for underground and aboveground storage tank systems.EQ-888Clay & Bailey Mfg. Co.Brad Holmes800-821-65832/07/2018Clay & Bailey Overfill Protection Valves 1228 Series 3”x 4” with AST Testable Option – UL File No. MH25085. Part no. 1228-03-35XXTThe installation, operation, and maintenance procedures shall be in accordance with the manufacturer’s instructions. Originally approved under EQ-257.[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-893Endress+HauserDean Mallon317-530-18204/02/2018Endress+Hauser FTL5x-xx Level SwitchFor use with UST and AST systems as liquid detector and overfill protection. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-895Morrison Brothers Co.Jerry Schollmeyer800-553-48405/9/2018Morrison Bros. Co. Overfill Prevention Valve 9095AM3200 AV, 9095AM-3300 For use with AST systems as overfill prevention, pressure fill. The installation, operation, and maintenance procedures shall be in accordance with the manufacturer’s instructions.EQ-897Flowline IncorporatedAdrian TottenJesus Aureoles862-598-3015 919-656-54025/31/2018Flowline Echopulse & Echopro Pulse Radar – Model Numbers: LR10, LR11, LR15, LR16, LR20, LR21, LR25, LR26, LR30, LR31For use with UST and AST systems as liquid detector and overfill protection. The installation and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-898Franklin Fueling SystemsSandra Adams800-225-97876/18/2018Franklin Fueling Systems TS-RA1 and TS-RA2 remote audible and visible alarm units. TS-RA2 for high background noise. TS-RK unit is a remote alarm acknowledgement unit for use with TS-RA1 and TS-RA2Installation and programming require a Franklin Fueling Certified Technician. For use in conjunction with Franklin Fueling SystemsT5, T550, T5000, T550evo, T5000evo, EVO200 and EVO400 ATG’s, and operation and maintenance in accordance with manufacturer’s requirements. EQ-899Red Lion Control, Inc.Joe Weaver717-767-6961Ext. 63066/22/2018Red Lion Analog Process Input Panel Meter Model PAX? - 1/8 DIN Analog Input Panel MetersInstallation, operation, and maintenance procedures shall be in accordance with the manufacturer’s instructions.EQ-900Morrison Brothers Co.Jerry Schollmeyer800-553-48406/27/2018Morrison Bros. Co. 9095C Overfill Prevention Valve – Positive Shut-Off during Pressurized Fill For use with AST systems as overfill prevention, pressure fill. The installation, operation, and maintenance procedures shall be in accordance with the manufacturer’s instructions.EQ-901Rochester Gauges LLCCustomerService@972-241-21619/11/2018Rochester Gauge Magnetic Liquid-Level Gauge Model Numbers: 6560, 6580, 8660, and 8680For use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.[Back to Categories]AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-908Clay and Bailey Mfg. Co.Brad Holmes800-821-658311/26/2018Clay and Bailey Overfill Prevention Valve 01228-03-41XX Series OPV. UL File No. MH25085For use with AST systems. The device must be installed and tested in accordance with manufacturer’s instructions prior to being placed into service.EQ-914Gizmo EngineeringPeter Blokhuis585-301-09701/25/2019Tank Level Alarm and Alarm Box. Models IS-AB and IS-TFor use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-917Pneumercator Co., Inc.Jonathan Levy631-293-84506/03/2019LC2000 Series Leak/Point-Level Alarm Console – used with the following Pneumercator leak sensor models: ES825-100F/XF/CF, ES825-200F/XF, LS600LDxx Series, LS610, RSU80x Series, RSU810; and with the following Point-Level Overfill sensors: LS600 SeriesFor use with both USTs and ASTs. The installation must be inspected and started up by a Pneumercator-certified technician. Testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-928Morrison Bros. Co.Jerry Schollmeyer800-583-48403/3/2020AST 915 Series Overfill Alarm System Model Numbers 915, 915S, 915ST, and 915HBFor use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-929Morrison Brothers Co.Jerry Schollmeyer800-553-48403/18/2020AST Series 724 Interstitial Leak Indicator and 724O Overfill IndicatorFor use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-937OPW Retail FuelingGene Pope813-431-20096/18/2020OPW 200TG Series Mechanical Tank Gauge Model Numbers 200TG-ENG, 200TG-ENG40 UL File No. MH29367For use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.AST/ Overfill Protection (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-941Morrison Brothers Co.Jerry Schollmeyer800-553-48407/10/2020AST Series 1618 and 1619 Vertical Tank Level Gauge: Vertical Tank Liquid Level Gauge with Overfill Alarm Relay Output – 1619 only (to a Morrison Bros. 918 Alarm sold separately)For use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.EQ-942Morrison Brothers Co.Jerry Schollmeyer800-553-48407/14/2020AST Series 1518 and 1519 Horizontal or Vertical Tank – Mechanical Tank Top Level Gauge: Tank Liquid Level Gauge with Overfill Alarm Relay Output -1519 only (to a Morrison Bros. Alarm sold separately)For use with AST systems. The installation, testing and maintenance shall be made in accordance with the manufacturer’s requirements.Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or RepairFile pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-001Pope & AssociatesGene Pope813-969-19004/21/1991FormexEQ-012ECC & AssociatesMark Stommel407-328-87195/21/1991ULC-2000EQ-032Eastern Piping ContainmentMark Stommel407-328-87196/19/1991MPD DispenserEQ-038Environmental Protection ProductsFrank Marchica516-756-72679/05/1991EPP DispenserEQ-045S. Bravo Systems, Inc.Don Mukai323-888-41239/17/1991B-200EQ-102Amoco Oil CompanyT. Tompkins305-938-273512/08/1992Dispenser LinerEQ-108Western Fiberglass, Inc.Rick Lewis800-688-337512/22/1992Dispenser Liner and Sump SystemEQ-115Unit Liner CompanyAlan Buck405-275-46003/10/1993Unit LinerEQ-120Riverside Steel, Inc.George Badu216-856-52994/13/1993Dispenser SumpEQ-122Total Containment, Inc.Tony Adamson610-666-21703/26/1993TCI Dispenser SumpEQ-132Smith Fiberglass, Inc.Bill Pierpont813-784-96076/10/1993Smith Dispenser SumpEQ-133Containment Technology, Inc.Gene Pope813-969-19006/09/1993Containment Technology Dispenser LinerEQ-184Promax, Inc.Doug Mills302-324-981212/22/1994Promax Dispenser Liner SumpEQ-203Petroleum Containment, Inc.R.W. Arn904-786-18005/12/1995Containment Dispenser Sump, and Containment SumpEQ-209Pipeline Energy (Formerly C.T. Petroleum Contractors, Inc.)Chuck Strickland386-292-23066/26/1995Retro-Liner Dispenser System[Back to Categories]Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct’s Name Condition(s)EQ-210MPC Containment System, Ltd.Dean Fleasas800-621-01467/03/1995Spillgard DispenserEQ-260Amoco CorporationDavid Killingsworth954-938-27357/18/1996Amoco Pour In Place Dispenser Liner SystemEQ-283Royal Petroleum, Inc.James Page407-723-84245/07/1997Flamemaster Pour In Place Dispenser Liner systemUsed on existing system onlyEQ-296Petro Fiberglass, Inc.Bill Tobias800-255-47839/23/1997Sump and Dispenser LinersEQ-308S. Bravo Systems, Inc.Don Mukai323-888-41331/12/1998B-8000 Dispenser LinerEQ-318OPW Gene Pope813-969-19002/17/1998OPW Flexworks TSS, TSM, TSD, PST, and PSL Sumps, and DS Series Dispenser LinersEQ-326Larry’s Pump ServiceLarry Jackson850-575-67758/05/1998Red-Kote Dispenser LinerUsed on existing system onlyEQ-331Monte petroleum contractors, Inc.Gasper Monte813-223-69388/20/1998Grouted Sumps Dispenser LinerEQ-353J & J Equipment CompanyJoe Mattingly850-584-655512/17/1998Custom LinersEQ-364S. Bravo Systems, Inc.Don Makai323-888-41233/02/1999B8600 Aboveground Dispenser ContainmentDispenser Liner for Shop-Fabricated ASTEQ-368OPW Gene Pope813-969-19003/10/1999OPW Flexworks (previously Pisces) Fiberglass Dispenser SumpEQ-423Advanced Polymer TechnologyGary Saltz608-838-87861/21/2000PT Dispenser LinerEQ-436PWH Equipment and Services Co., Inc.Josh Pryor813-621-20775/08/2000Aboveground dispenser Containment Dispenser Liner for Shop-Fabricated ASTEQ-437Fairfield Industries, Inc.Mark Sisco973-228-34485/08/2000Fairfield Industry Model DPDispenser Liner for Shop-Fabricated AST[Back to Categories]Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct’s Name Condition(s)EQ-439OPW (Formerly Environ Products, Inc.)Gene Pope813-969-19006/06/2000Dispenser Sump Liner FDS Models FDS-1512, 2014, 2414, 2417, 2717, 2816, 2922, 3210, 3215, 3621, 4021, 4422, 4319, 4614, 4714, 4715, 4721, 5922, BPF-7424-W, BPF-7424-TEQ-440Fab-Seal Industrial Liners, Inc.Michael Nichols800-874-01666/06/2000Fab-Seal Sump LinerApproved as a piping sump, a dispenser liner, or for repairs to existing piping sumps or dispenser liners for USTsEQ-444S. Bravo Systems, Inc.Don Makai323-888-41333/02/1999B-4000 Fiberglass Dispenser LinerEQ-578Fiberlite Composites Ltd.Joanne WestwoodUnited Kingdom44(0)1755-7797732/17/2004FRP turbine tank sump systems with manhole cover Part #s S8CR-336, S8CR-390, S8CR/390/SEAL (seal between corbel & skirt), S8SB-336, S8SB-390, S8SB-390/SEAL (seal between corbel & skirt), FRP fill tank sump systems with manhole cover and structural platform Part no.’s S8CR-336/SS8CR-390/S, S8CR-390/SEAL/S (seal between corbel & skirt), S8SB-336/S, S8SB-390/SS8SB-390/SEAL/S (seal between corbel & skirt), and FRP Under Pump Sump Part no. EL46-26[Back to Categories]Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct’s Name Condition(s)EQ-580Petro Technick, Inc.Ira Sands201-871-73003/08/2004DC4830SB Petro Tite PE Tank Sump, DS2111 Petro Tite PE Sump, DS2416 Petro Tite PE Sump, DS3017 Petro Tite PE Sump, DS3617 Petro Tite PE Sump, DS4111 Petro Tite PE Sump, and DS4417 Petro Tite PE SumpEQ-612Franklin Fueling Systems (Formerly Phil –Tite Enterprises)Gary Saltz608-838-87866/17/2005Phil-Tite Under Dispenser Sumps EQ-615S. Bravo Systems, Inc.Don Mukai323-888-41339/12/2005B9000 Series Single Wall Under Dispenser Containment Sumps, B4000 Series Double Wall Under Dispenser Containment Sumps, B8000 Series Double Wall Under Dispenser Containment Sumps, B8500 Series Double UDC Sumps, B9000 Double Wall Under Dispenser Containment SumpsEQ-627Painted Rhino (Formerly National Environmental Fiberglass LLC)Ryan Franklin951-656-55241/10/2006Updated 4/28/2017NEF Single Wall and Double Wall Sumps and Dispenser Sumps, UL File Number MH30126The initial testing is done in accordance with Exhibit A. EQ-631Advanced Containment, L.L.C.Gary DiMaggio II661-637-21171/30/2006Advanced Containment Single Wall and Double Wall Sumps and Dispenser Sumps, UL File Numbers MH45027, and MH45028The initial testing is done in accordance with Exhibit A.[Back to Categories]Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued) File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-580Petro Technick, Inc.Ira Sands201-871-73003/08/2004DC4830SB Petro Tite PE Tank Sump, DS2111 Petro Tite PE Sump, DS2416 Petro Tite PE Sump, DS3017 Petro Tite PE Sump, DS3617 Petro Tite PE Sump, DS4111 Petro Tite PE Sump, and DS4417 Petro Tite PE SumpEQ-612Franklin Fueling Systems (Formerly Phil –Tite Enterprises)Gary Saltz608-838-87866/17/2005Phil-Tite Under Dispenser Sumps EQ-615S. Bravo Systems, Inc.Don Mukai323-888-41339/12/2005B9000 Series Single Wall Under Dispenser Containment Sumps, B4000 Series Double Wall Under Dispenser Containment Sumps, B8000 Series Double Wall Under Dispenser Containment Sumps, B8500 Series Double UDC Sumps, B9000 Double Wall Under Dispenser Containment SumpsEQ-627National Environmental Fiberglass, L.L.C.Marty Roelle760-246-06481/10/2006NEF Single Wall and Double Wall Sumps and Dispenser Sumps, UL File Number MH30126The initial testing is done in accordance with Exhibit A. EQ-631Advanced Containment, L.L.C.Gary DiMaggio II661-637-21171/30/2006Advanced Containment Single Wall and Double Wall Sumps and Dispenser Sumps, UL File Numbers MH45027, and MH45028The initial testing is done in accordance with Exhibit A.EQ-653Western Fiberglass, Inc.Michael Lewis707-523-205010/25/2006Western Fiberglass Double Wall Sumps and Dispenser Sumps, UL File Numbers MH19409EQ-727S. Bravo Systems, Inc.Don Mukai323-888-41331/22/2009Bravo Deep Dispenser Containment B 7000 Revolution Series, UL File No. MH 29867Approved in the State of Florida provided that the initial testing is done in accordance with Exhibit A. [Back to Categories]Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-742Diversified Products Manufacturing, Inc.John Rowe530-534-396610/14/2009Diversified Super sumps Model Numbers, SU RSP55, SU RSP35, and SU RSFApproved in the State of Florida provided that the initial testing is done in accordance with Exhibit A. (See EQ-801 for approval of smaller sump).EQ-776Mott-Smith Consulting Group, LLC Marshall Mott-Smith850-391-98358/24/2011Fibrelite Composites, Ltd., Fiberglass Sump Systems, Model Numbers: S45-1180; EL-G-E500; EL-G-LEG; S8CRD-390/WT; S8CRD-3100/MP/WSP-16-5; S8CRD-3100-OF/WSP-8-5; S/42-3100/MP16/SR-EXT/7-11; & S/42-3100/OF8/SR-EXT/7-11The installation of the sumps shall be made in accordance with the manufacturer’s recommendations. A structural integrity test that is in accordance with the manufacturer’s recommendations shall be conducted and passed before the sump is placed into operation.EQ-786Franklin Fueling SystemsSandra Adams608-838-56685/03/2012Two Piece Containment Sump, Model Number DHW-786May be installed and used as piping sumps or dispenser liners associated with USTs and ASTs.EQ-797Franklin Fueling SystemsSandra Adams608-838-566811/28/2012Franklin Fueling Systems Dispenser Sumps Model Numbers DS3915-2 and DS3617The installation shall be in accordance with the manufacturer’s recommendations. EQ-801Diversified Products Manufacturing, Inc.John Rowe530-534-39662/7/2013Diversified Products Manufacturing, Inc. Resin Transfer Molded Fiberglass Transition Sump (24 x 24 inches)Previously approved under EQ-742 in a larger size.[Back to Categories]Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-806Icon Containment Solutions, LLCPaul Reber855-379-78674/10/2013ForTex & RigidFlex sump entry fittings, Sikaflex-1a sealant, FastFill (olyuria) sealant and PetroSeal sealantApproved in the State of Florida as entry fittings and sealants for the integral piping penetrations of the sump walls associated with USTs and ASTs. The installation and repair shall be made in accordance with the manufacturer’s recommendations.EQ-823Morrison Bros. Co.Kelly Briant800-553-48404/04/2014Model 434 Dispenser Pedestal for Aboveground Storage Tank SystemsThe surface installation and testing procedures for the dispenser pedestal shall be made in accordance with the manufacturer’s recommendations.EQ-827Diamond Z EngineeringJason Stapp800-282-72868/15/2014S. Bravo Systems Model B-1000 / B-1000-E Series Fiberglass Containment SumpInstallation and integrity testing procedures shall be made by an S. Bravo certified installer in accordance with the manufacturer’s recommendations. See also EQ-909 for double-walled version. The single-walled version can use either EQ-827 or EQ-909.EQ-828Franklin Fueling SystemsSandra Adams608-838-56689/19/2014Franklin Fueling Systems APT Sump Model AST-2922Installed as a dispenser sump or a transition sump associated with aboveground storage tank systems. Installation and integrity testing procedures for the Franklin Fueling Systems APT Sump Model AST-2922 shall be made in accordance with the manufacturer’s recommendations.EQ-870Emco WheatonWayne Boyd252-243-8261ewb@ 1/24/2017Emco Wheaton A0718 Aboveground Dispenser SumpThe Emco A0718 dispenser sumps are used for aboveground and marina applications where mounting and secondary containment are required for a fuel dispenser. The sump should only be used with the designated dispenser to insure proper fit and mounting security.Dispenser Sumps (Liners)/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct’s NameCondition(s)EQ-896Icon Containment Solutions, LLCPaul Reber855-379-78675/10/2018Icon SplitRepair Fittings – Compression* & Bonded SealIcon SplitRepair Fittings – Related Materials: Icon FastFuse ProTex Material Bonding SolventSika Sikaflex 1a Gasket SealantIcon PetrolSeal Sealant*ProTex MaterialIcon iBond Structural BonderIcon PolyFuse Structural BonderRegistered in the State of Florida as entry fittings and sealants for the integral piping penetrations of the sump walls associated with USTs and ASTs. The installation and repair shall be made in accordance with the manufacturer’s recommendations. Previously listed under EQ-806.EQ-909S. Bravo Systems, Inc.Keith Pearson and Mamdouh Elsharkawy800-282-728611/29/2018S. Bravo Systems, Inc. B1000 Series Single-walled and Double-walled Underground Dispenser SumpsInstallation and integrity testing procedures shall be made by an S. Bravo certified installer in accordance with the manufacturer’s recommendations. See also EQ-827 for the single-walled version. Either EQ no. can be used for the single-walled UDC.EQ-922Franklin Fueling SystemsBradley Fawcett608-838-565010/18/2019Franklin Fueling Systems 602 Carbon Series SW and DW Dispenser Sumps for USTsThe installation and maintenance shall be in accordance with the manufacturer’s recommendations. EQ-931Franklin Fueling SystemsBradley Fawcett608-838-56504/09/2020Franklin Fueling Systems Classic Series Dispenser Sump Models DP-1816, DP-2014, DP-2816, and DP4721The installation and maintenance shall be in accordance with the manufacturer’s recommendations.EQ-938ZJ Industrial Products LLCCallahan Williams844-850-00056/19/2020RigidFlex and FR-Eco Sump and Entry Test Fittings for ASTs and USTs. UL File No. MH28727The installation and maintenance shall be in accordance with the manufacturer’s recommendations.[Back to Categories]Sump Liners/ Installed as a part of Integral Piping, Upgrade, or RepairFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-108Western Fiberglass, Inc.Rick Lewis800-688-337512/22/1992Dispense Liner and Sump SystemEQ-203Petroleum Containment, Inc.R.W. Arn904-786-18005/12/1995Containment Dispenser Sump, and Containment SumpEQ-295Total Containment, Inc.Tony Adamson610-666-21709/22/1997Super sump LinerUsed on existing system onlyEQ-296Petro Fiberglass, Inc.Bill Tobias800-255-47839/23/1997Sump and Dispenser LinersEQ-318OPW Fueling Management SystemsGene Pope813-969-19002/17/1998TSS, TSD, and PSL Sumps, and DS Series Dispenser LinersEQ-334Pope & Associates, Inc.Gene Pope813-969-19009/08/1998Xerxes Corporation sump liner for retrofitting piping sumpsEQ-340Red Jacket PumpsChad Oberman800-262-753911/02/1998Red Jacket UnisumpEQ-368OPW Gene Pope813-969-19003/10/1999OPW Flexworks Fiberglass Tank SumpEQ-395Containment Solution, Inc.Kevin Soeder936-756-77318/31/1999Containment Solution Turbine Enclosures, Models WTE and STEEQ-397Xerxes CorporationGene Pope813-969-19009/07/1999Xerxes Attached Collar Model AC, and Watertight Riser Assembly Sump Model ACR-WTEQ-423Franklin Fueling Systems (Formerly, Advanced Polymer Technology)Sandra Adams608-838-56681/21/2000APT Sump Liner; TSD-W-4736 and TSM-4736 APT SumpsEQ-440Fab-Seal Industrial Liners, Inc.Michael Nichols800-874-01666/06/2000Fab-Seal Sump LinerApproved as a piping sump, a dispenser liner, or for repairs to existing piping sumps or dispenser liners for USTs[Back to Categories]Sump Liners/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct's Name Condition(s)EQ-459OPW (Formerly Environ Products, Inc.)Gene Pope813-969-190010/12/2000OPW Flexworks Collar Mount Tank Sumps Models DBS-3642F, DBS-4242F, FSC-4200, and Flat Bottom Tank Sumps Models DBS-3642FB, DBS-4242FBEQ-540OPW (Formerly Environ Products, Inc.)Gene Pope813-969-19008/29/2002OPW Flexworks Tank Sumps Model Numbers SBS-3642H & 4242H, MBS-3645H & 4245H, DBS-3645H, 4245H & 4248H, EBS-3042H, 3645H, 4245H, 4248H and Dispenser Sumps Model Numbers SDS, DDS, EDS, SDP, DDP -1512, 2014, 2414, 2417, 2717, 2816, 2922, 3210, 3215, 3621, 4021, 4422, 4319, 4614, 4714, 4715, 4721, 5922, BPS-7424-W, BPS-7424-T The Department’s previous approval EQ-029, dated June 20, 1991, is no longer in effect.EQ-578Fiberlite Composites Ltd.Joanne WestwoodUnited Kingdom 44(0)1755-7797732/17/2004FRP turbine tank sump systems with manhole cover part #s S8CR-336, S8CR-390, S8CR/390/SEAL (seal between corbel & skirt), S8SB-336, S8SB-390, S8SB-390/SEAL (seal between corbel & skirt), FRP fill tank sump systems with manhole cover and structural platform Part no.’s S8CR-336/SS8CR-390/S, S8CR-390/SEAL/S (seal between corbel & skirt), S8SB-336/S, S8SB-390/SS8SB-390/SEAL/S (seal between corbel & skirt), and FRP Under Pump Sump Part no. EL46-26[Back to Categories]Sump Liners/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct's Name Condition(s)EQ-580Petro Technick, Inc.Ira Sands201-871-73003/08/2004DC4830SB Petro Tite PE Tank Sump, DS2111 Petro Tite PE Sump, DS2416 Petro Tite PE Sump, DS3017 Petro Tite PE Sump, DS3617 Petro Tite PE Sump, DS4111 Petro Tite PE Sump, and DS4417 Petro Tite PE SumpEQ-605OPW (Formerly Environ Products, Inc.)Gene Pope813-969-190012/21/2004OPW Flexworks JBS-2422, IPS-3838, PTS-3848, PTS-2922, and PTS4021 SumpEQ-612Franklin Fueling Systems (Formerly Phil –Tite Enterprises)Gary Saltz608-838-87866/17/2005Phil-Tite UST Sumps EQ-615S. Bravo Systems, Inc.Don Mukai323-888-413309/12/2005B400 Series Single Wall Sumps, B500 Series Single Wall Transition Sumps, B600 Series Single Wall Vent Transition Sumps, B400 Series Double Wall Tank Sumps, B500 Series Double Wall Vent Transition Sumps, B600 Series Double Wall Vent Transition Sumps, B4000 Series Double Wall Under Dispenser Containment Sumps, B8500 Series Double Vent Transition Combination SumpsEQ-627National Environmental Fiberglass, L.L.C.Marty Roelle760-246-06481/10/2006NEF Single Wall and Double Wall Sumps and Dispenser Sumps, UL File Number MH30126The initial testing is done in accordance with Exhibit A. EQ-631Advanced Containment, L.L.C.Gary DiMaggio II661-637-21171/30/2006Advanced Containment Single Wall and Double Wall Sumps and Dispenser Sumps, UL File Numbers MH45027, and MH45028The initial testing is done in accordance with Exhibit A.EQ-653Western Fiberglass, Inc.Michael Lewis707-523-205010/25/2006Western Fiberglass Double Wall Sumps and Dispenser Sumps, UL File Numbers MH19409EQ-664Franklin Fueling Systems (Beaudreau Electric, Inc.)Bradley Fawcett608-838-56503/16/2007BEI OneSump System[Back to Categories]Sump Liners/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct's Name Condition(s)EQ-680Containment SolutionsKevin Soeder936-756-77317/19/2007Containment Solutions Double Wall Sumps Models DW-PTS and DW-RTS Series, UL File Number MH29555Containment Solutions Double Wall Sumps Models DW-PTS and DW-RTS Series, UL File Number MH29555as piping sumps for underground storage tanks is approved in the State of Florida provided that the initial testing is done in accordance with Exhibit A.EQ-687Xerxes CorporationGene Pope813-969-190010/23/2007Xerxes Single & Double Wall Sumps Series, UL File Number MH9061Approved in the State of Florida provided that the initial testing is done in accordance with Exhibit A. EQ-727S. Bravo Systems, Inc.Don Mukai323-888-41231/22/2009Bravo Deep Dispenser Containment B 7000 Revolution Series, UL File No. MH 29867Approved in the State of Florida provided that the initial testing is done in accordance with Exhibit A. EQ-759S. Bravo Systems, Inc.Don Mukai323-888-412311/17/2010Bravo Systems B-700 Series Fiberglass Transition Sumps, Model #s: B-700-FS, B-700-FL, B-700-PS, B-710-FS, B-710-FL, B-710-PS, B-710-PL, B-750-FS, B-750-FL, B-760-FS, and B-760-FL; UL File no. MH26018Approved in the State of Florida provided that the initial testing is done in accordance with Exhibit A. EQ-774Armor Shield of America [Previously Double Wall Retrofit Systems, Inc. (DSRI)]Tony RieckScott Sharp719-359-8467513-684-00408/10/2011Updated 1/25/2019Armor Shield of America Sump Repair/In-Situ Construction System (previously called Double Wall Retrofit Systems, Inc. Sump Repair System)Conditional Approval[Back to Categories]Sump Liners/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-776Mott-Smith Consulting Group, LLC Marshall Mott-Smith850-391-98358/24/2011Fibrelite Composites, Ltd., Fiberglass Sump Systems, Model Numbers: S45-1180; EL-G-E500; EL-G-LEG; S8CRD-390/WT; S8CRD-3100/MP/WSP-16-5; S8CRD-3100-OF/WSP-8-5; S/42-3100/MP16/SR-EXT/7-11; & S/42-3100/OF8/SR-EXT/7-11The installation of the sumps shall be made in accordance with the manufacturer’s recommendations. A structural integrity test that is in accordance with the manufacturer’s recommendations shall be conducted and passed before the sump is placed into operation.EQ-786Franklin Fueling SystemsSandra Adams608-838-56685/03/2012Two Piece Containment Sump, Model Number DHW-786May be installed and used as piping sumps or dispenser liners associated with USTs and ASTs.EQ-806Icon Containment Solutions, LLCPaul Reber855-379-78674/10/2013ForTex & RigidFlex sump entry fittings, Sikaflex-1a sealant, FastFill (polyurea) sealant and PetroSeal sealantApproved in the State of Florida as entry fittings and sealants for the integral piping penetrations of the sump walls associated with USTs and ASTs. The installation and repair shall be made in accordance with the manufacturer's recommendations.EQ-836Mott-Smith Consulting GroupMarshall Mott-Smith850-391-98351/05/2015Diversified Products Manufacturing, Inc. Watertight Tank Sump Retrofit Lid Kit (Model SU TSLF and SU TSAR) and Associated Pump Penetration and Repair FittingsThe repair procedures shall be made in accordance with the manufacturer’s recommendations.[Back to Categories]Sump Liners/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-839Franklin Fueling SystemsSandra Adams608-838-56682/2/2015APT Sump Models TSD-W-4736 and TSM 4736The installation, operation, and maintenance procedures shall be made in accordance with the manufacturer’s recommendations.EQ-844Franklin Fueling SystemsSandra Adams608-838-56685/27/2015Fiberglass Turbine Sump Models TM4236-0/0-XX-X, TM4836-0/0-XX-X, TMA4236-0/0-XX-X, TMA4836-0/0-XX-X, TS4236-0/0-XX-X, TD4236-0/0-XX-X, TD4836-0/0-XX-X, TDA4236-0/0-XX-X, and TDA-4836-0/0-XX-XThe X’s indicate model variables for each of the main type sump and an explanation of the model code is found in Attachment 2 “EQ844 Model Number Reference Chart”. The Models are underground single-walled or double-walled turbine sumps that are associated with underground storage tank systems.EQ-820S. Bravo Systems, Inc.Micah Nelson800-282-7286323-888-41333/24/2014S. Bravo Systems Entry Fittings and Entry Fitting Retrofits for Fiberglass Sumps: F Series Retrofit-S FittingsThe fittings may be used to provide piping access through piping sumps and dispenser liners associated with underground and aboveground storage tanks.EQ-864S. Bravo Systems, Inc.Jonathan Smith800-282-7286323-888-41335/10/2016S. Bravo Systems, Inc.Direct Replacement – Bolted Fittings and Direct Replacement – Thread on Penetration FittingsThe fittings may be used to provide piping access through piping sumps and dispenser liners associated with underground and aboveground storage tanks.[Back to Categories]Sump Liners/ Installed as a part of Integral Piping, Upgrade, or Repair (Continued)File pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-896Icon Containment Solutions, LLCPaul Reber855-379-78675/10/2018Icon SplitRepair Fittings - Compression* & Bonded SealIcon SplitRepair Fittings - Related Materials: Icon FastFuse ProTex Material Bonding SolventSika Sikaflex 1a Gasket SealantIcon PetrolSeal Sealant*ProTex MaterialIcon iBond Structural BonderIcon PolyFuse Structural BonderRegistered in the State of Florida as entry fittings and sealants for the integral piping penetrations of the sump walls associated with USTs and ASTs. The installation and repair shall be made in accordance with the manufacturer’s recommendations. Previously listed under EQ-806.EQ-912OPW Fueling Containment Systems, Inc.Gene Pope813-969-19001/15/2019OPW FibreTite Fiberglass Tank Sumps for Underground Storage Tank Systems. Model FTSM & FTSD Series.The installation of the sumps shall be made in accordance with the manufacturer’s recommendations and tested per Chapter 62-761, F.A.C.EQ-913OPW Fueling Containment Systems, Inc.Gene Pope813-969-19001/15/2019OPW ElectroTite Fiberglass Tank Sumps for Underground Storage Tank Systems. Models FCSM & FCSD Series.The installation of the sumps shall be made in accordance with the manufacturer’s recommendations and tested per Chapter 62-761, F.A.C.EQ-938ZJ Industrial Products, LLCCallahan Williams844-850-00056/19/2020RigidFlex and FR-Eco Sump and Entry Test Fittings for ASTs and USTs. UL File No. MH28727The installation and maintenance shall be in accordance with the manufacturer’s recommendations.Hydrant PitsFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-545Dabico, Inc.Dan Foster714-545-790011/21/2002Dabico Hydrant Fueling System PitsApproved as secondary containment for airport and seaport hydrant piping.[Back to Categories]MiscellaneousA. FoamFile pany NameContactTelephoneApproval DateProduct's NameConditionsEQ-293Petro Fill, Inc.Mike Dugger803-871-61249/23/1997Petro-FillConditional ApprovalEQ-328R-501 (previously PolyMasters, Inc.)Bobby Hill865-675-96007/31/1998Updated 4/19/2019 and 1/10/2020R-501 UST and AST Tank Fill FoamConditional ApprovalEQ-445Thermal Corporation of AmericaJim Brau888-385-36268/16/2000Thermco insulation FoamConditional ApprovalEQ-505The Perma Fill CorporationScott Sanders800-755-20979/28/2001Perma-Fill FoamConditional ApprovalEQ-591C.P. Chemical, Inc.Walter Hasselman914-428-25177/16/2004Tripolymer? 105-TM Tank Media FoamConditional ApprovalEQ-672cfiFoam, inc.Richard Porter865-588-44645/02/2007Tank FoamConditional ApprovalB. InventoryFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-152Miami Software CorporationAnnelie Piccioni305-242-626412/16/1993Miami SoftwareInventory Reconciliation for gas station[Back to Categories]C. Pump & AccessoriesFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-288Amoco CorporationDavid Killingsworth954-938-27357/01/1997Amoco Submercible PumpContainment D. Flex Connector Cover MaterialFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-330Jack Pittman & AssociatesBill Tobias800-255-47837/31/1998Austin Engineering Zip BootEQ-340Red Jacket PumpsChad Oberman800-262-753911/02/1998Red Jacket UnisumpEQ-3463MSales Department407-855-710011/02/1998FP-301 and EPS-300 flexible polyolefin heat-shrink tubing, and the 8440 Series silicone rubber Cold Shrink TubesThe heat source for shrinking the FP-301 and EPS-300 flexible polyefin heat shrink tubing shall not be used in situ, and the heat shrinking process for the FP-301 and EPS-300 products shall only be applied when the flex connectors are away from flammable and combustible products or vapor conditions.EQ-369OPW (Formerly Environ Products, Inc.)Gene Pope813-969-19003/10/1999Environ Isolation Tube[Back to Categories]E. Monitoring Well AccessoriesFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-204Dickey Manufacturing CompanyJames Hawkins708-584-29185/12/1995The Dickey Globe Seals and The Dickey Premier Car Seals(MW Seals)EQ-230Enviro Design Products, Inc.Bill Watts800-422-935511/15/1995EX-CAPMonitoring Well CapF. Aboveground Valve CoverFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-402Environmental Protection ServicesRobert Haddox281-362-002211/05/1999EPS Valve ShieldEQ-405CMS Engineering, Inc.David Schultz813-247-611211/17/1999CMS Valve ContainmentG. Internal InspectionFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-418Tank Tech, Inc.Bud Mattox800-871-40081/14/2000Tank Tech Scope? Inspection MethodApproved as an equivalent method to internal inspection of internally lined underground storage tanks in accordance NLPA 631, Chapter B.[Back to Categories]H. Overfill RetentionFile No. Company Name ContactTelephone Approval Date Product's Name Condition(s)EQ-517Eco-Tank Systems, LLCGreg Ludwig610-495-95832/26/2002Tank Shell Monitoring System GT?-TABSThe System is approved for aboveground storage tank overfill retention and tank shell monitoring in the State of Florida provided the tank is equipped with an approved overfill detection device.EQ-659Industrial Maintenance Group, Inc.Peter Van Fossem813-659-35122/07/2007TRAPS SystemConditional Approval EQ-699Eco-Tank Systems, LLCGreg Ludwig610-495-95831/29/2008Eco-Tank Systems TABS 02Conditional ApprovalEQ-738Eco-Tank Systems, LLCGreg Ludwig610-495-95838/11/2009Eco-Tank TABS-C, TABS-CF & TABS-F SystemsConditional ApprovalEQ-739Chevron CorporationRick Garrett813-805-9419/15/2009Concrete Alternative Dike-field Containment SystemConditional Approval[Back to Categories]I. Hydrostatic and Containment TestingFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-600Enhanced Leak Detection, Inc.Dan McGill714-523-019411/17/2004Hydro-Tite TestApproved as a Hydrostatic test for underground dispenser and piping sump.EQ-628Veeder-Root CompanyTech SupportCustomer Svc800-323-1799888-561-79421/17/2006Veeder-Root Mag Sensor Hydrostatic Test, and Secondary Containment Vacuum Sensing SystemConditional ApprovalEQ-670Praxair Services, Inc.Randy Golding520-888-94004/30/2007Praxair Pressure/Vacuum Decay Containment Testing MethodApproved as a containment integrity test for single-walled underground dispenser and piping sumps in the State of Florida.EQ-915ACCENT Environmental Services, Inc.Daniel Brevard409-842-01502/05/2019Dri-sump Containment Tightness TestThe test must be in accordance with the manufacturer’s requirements.J. Double-Walled UST System Tightness TestingFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-635Praxair Services, Inc.Randy Golding520-888-94003/28/2006Tracer Tight? Method for tightness testing of double-walled underground tanks and integral small diameter double-walled pipingApproved as a tightness test for double-walled underground tanks and double-walled underground small diameter piping (excluding piping sumps and dispenser liners) before the tank system is placed into service in the State of Florida.[Back to Categories]K. AST Corrosion Inhibitor SystemsFile pany NameContactTelephoneApproval DateProduct's NameCondition(s)EQ-813Northern Technologies International CorporationCustomer Servicetechsupport@763-404-8701763-404-87029/13/2013Northern Technologies International Corporation Zerust? Oil & Gas - ReCAST-SSB SystemApproved as a corrosion inhibitor system. The application system shall be designed by a corrosion professional. The installation, testing and operation shall be made in accordance with manufacturer's recommendations.[Back to Categories] ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download