General State Permits and General Permits under Title V

[Pages:1]September 18, 2007

Mr. Gerald Marchand Facilities Manager Advanced Polymers, Inc. 29 Northwestern Drive Salem, NH 03079

Re: Issuance of General State Permit: GSP-EG-217 Source Category: Internal Combustion Engines Used As Emergency Generators Advanced Polymers, Inc., 29 Northwestern Drive, Salem, New Hampshire Facility ID# 3301590908 Application #: FY07-0179

Dear Mr. Marchand:

The New Hampshire Department of Environmental Services, Air Resources Division (DES) hereby issues the enclosed General State Permit in accordance with the New Hampshire Code of Administrative Rules Env-A 610, General State Permits and General Permits under Title V. This General State Permit is issued specifically for the following device as described in the permit application submitted by the Advanced Polymers, Inc. and received by DES on August 3, 2007:

Device

Emergency Generator No. 1

Make, Model, Serial No.

Caterpillar 3456

C4G00146

Year Installed

May 2005

Fuel(s) Diesel

Max. Heat Max. Fuel

Input

Use Rate

Rate

gal/hr

4.40

32.1

Output Rating

570 kW

The General State Permit for Internal Combustion Engines Used as Emergency Generators is viewable online at the following Web address: .

Please note that the enclosed permit expires on August 31, 2008. If you wish to continue operation of the device beyond August 31, 2008, you must apply for permit renewal in accordance with Env-A 610.12, Expiration Date and General State Permit Reestablishment Procedures.

If you have any questions, please contact David Cribbie of the Air Resources Division, Permitting and Environmental Health Bureau, at (603) 271-5551.

Sincerely,

Robert R. Scott Director Air Resources Division

rrs/djc encl: General State Permit: Internal Combustion Engines Used As Emergency Generators

Emergency Generator Engineering Analysis

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download