References for Tribology References Quarterly Upload



[pic]

Tribology Research References Quarterly Update- Vol.1, 2009

|S.No. |Journal |

|1 |Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |

| |a) Volume 223, Number 1 / 2009 |

| |b) Volume 223, Number 2/ 2009 |

| |c) Volume 223, Number 3 / 2009 |

|2. |Tribology International |

| |a) Volume 42, Issue 1 (January 2009) |

| |b) Volume 42, Issue 2 (Feburary 2009) |

| |c) Volume 42, Issue 3 (March 2009) |

| |d) Volume 42, Issue 4 (April 2009) |

| |e) Volume 42, Issue 5 (May 2009) |

| |f) Volume 42, Issue 6 (June 2009) |

|3. |Tribology Letters |

| |a) Volume 33, Number 1(January, 2009) |

| |b) Volume 33, Number 2 (February, 2009) |

| |c) Volume 33, Number 3 (March, 2009) |

| |d) Volume 34, Number 1 (April, 2009) |

| |e) Volume 34, Number 2 (May, 2009) |

| |f) Volume 34, Number 3 (June, 2009) |

|4. |Tribology Transactions |

| |a) Volume 52 Issue 1 2009 |

| |b) Volume 52 Issue 2 2009 |

| |c) Volume 52 Issue 3 2009 |

| |d) Volume 52 Issue 4 2009 |

| | |

|5. |Wear |

| |a) Volume 266, Issues 1-2 (5 January 2009) |

| |b) Volume 266, Issues 3-4 (5 February 2009) |

| |c) Volume 266, Issues 5-6 (15 March 2009) |

| |d) Volume 266, Issues 7-8 (25 March 2009) |

| | e) Volume 266, Issues 9-10 (24 April 2009) |

| |f) Volume 266, Issues 11-12 (30 May 2009) |

|S.No. |Journal |

|6. |Indian Journal of Tribology |

| |a) Volume 4, No. 1, January-June-2009 |

|7. |Journal “ Lubrication Science”(From 2009 Journal of Synthetic Lubrication and Tribotest will be also incorporated in this Journal) |

| |a) Volume 21 Issue 1 , January 2009 |

| |b) Volume 21 Issue 2 , February 2009 |

| |c) Volume 21 Issue 3 , March 2009 |

| |d) Volume 21 Issue 4 , April 2009 |

|8. |Journal of Tribology |

| |a) Volume 131, Number 1, January 2009 |

| |b) Volume 131, Number 2, April 2009 |

1. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

|S.No. |Index |

|Volume 223, Number 1 / 2009 |

|1 |Tribology research in China: a personal view. |

|2 |Sound of a ball spline operated at a certain linear velocity |

|3 |Characterization of thermally sprayed micro- and nanocrystalline cylinder wall coatings by means of a cavitation test |

|4 |The effect of niobium on the adhesive wear resistance of ferritic stainless steel |

|5 |Frictional and wear performance of polyester composites based on coir fibres |

|6 |Interaction research of thiadiazole derivate and molybdenum naphthenate using X-ray absorption near edge structure spectroscopy |

|7 |About the validity of Reynolds equation and inertia effects in textured sliders of infinite width |

|8 |Transient modal analysis of the non-linear dynamics of a turbocharger on floating ring bearings |

|9 |Instantaneous angular speed and power for the diagnosis of single-stage, double-acting reciprocating compressor |

|10 |Predicting the thermal behaviour of engine oils using artificial neural networks |

|Volume 223, Number 2/ 2009 |

|1 |Non-linearity in experimental journal bearing dynamics – a new approach |

|2 |A method for determining the periodic solution and its stability of non-linear bearing–rotor system based on observed states of the system |

|3 |Analytical investigation of a partially textured parallel slider |

|4 |Surface coatings and finite-element analysis of layered fretting contacts |

|5 |Wear and frictional performance of betelnut fibre-reinforced polyester composite |

|6 |Experimental investigations on the influence of emulsifier content in cutting fluids on machined surface |

|7 |Influence of emulsifier content in cutting fluids on cutting forces, cutting temperatures, tool wear, and surface roughness |

|8 |Dynamic stiffness and damping characteristics of one-dimensional magneto-hydrodynamic inclined-plane slider bearings |

|9 |Applicability of cutting fluids with nanoparticle inclusion as coolants in machining |

|10 |Influence of counterbody material on fretting wear behaviour of uncoated and diamond-like carbon-coated Ti-6Al-4V |

(Back

|S.No. |Index |

|11 |Book Review : Tribology on the Small Scale, C. M.Mate, 2008, Oxford University Press, Oxford, UK, 33 pp. (hardback) (ISBN 978-0-19-852678-0) |

|Volume 223, Number 3 / 2009 |

|1 |Component mal-position: the ‘Achilles’ heel' of bearing surfaces in hip replacement |

|2 |Roles of adsorbed film and gel layer in hydration lubrication for articular cartilage |

|3 |Wear tests of orthopaedic biopolymers with the biolubricant augmented by a visco-supplement |

|4 |The influence of swing phase load on the electrochemical response, friction, and ion release of metal-on-metal hip prostheses in a friction simulator |

|5 |Effect of surface modification on surface properties and tribological behaviours of titanium alloys |

|6 |Tribological analysis of failed resurfacing hip prostheses and comparison with clinical data |

|7 |Friction and lubricant film thickness measurements on simulated synovial fluids |

|8 |Thin film flow over flexible membranes containing surface texturing: bio-inspired solutions |

|9 |Review of the lubrication, sealing, and pumping mechanisms in oil- and grease-lubricated radial lip seals |

|10 |Dynamics of offset journal bearings – revisited |

|11 |Impact of the cavitation model on the theoretical performance of heterogeneous slip/no-slip engineered contacts in hydrodynamic conditions |

|12 |The effect of load and viscosity on the minimum operating oil film thickness of piston-rings in internal combustion engines |

|13 |Effects of friction modifiers on Pb-free plain bearing lubrication |

|14 |Tribological properties of diamond-like carbon coatings in lubricated automotive applications |

|15 |Friction modelling in an engine valve train considering the sensitivity to lubricant formulation |

|16 |Young's moduli and wear of cermet coatings |

|17 |Effects of area ratio and nature of surfaces on scuffing in lubricated contacts |

|18 |The influence of sea water in oil emulsion on bearing performance |

|19 |Investigations on the power losses and thermal effects in gear transmissions |

|20 |Micropitting of carburized gears lubricated with biodegradable low-toxicity oils |

|21 |High-speed wear lifetime analysis of instrument ball bearings |

|22 |Film thickness calculation in elasto-hydrodynamic lubricated line and elliptical contacts: the Dowson, Higginson, Hamrock contribution |

|23 |Engineering analysis of rough elastohydrodynamically lubricated contacts |

|24 |An exploration of the elastohydrodynamic– hydrodynamic transition through film thickness measurements in rolling point contacts |

(Back

|S.No. |Index |

|25 |Prediction of film thickness decay in starved elasto-hydrodynamically lubricated contacts using a thin layer flow model |

|26 |Lubrication of an electroplated nickel matrix silicon carbide coated eutectic aluminium–silicon alloy automotive cylinder bore with an ionic liquid as a lubricant additive |

|27 |Effects of various base oils and additives on the tribological behaviour of lubricated aluminium- on-aluminium and steel-on-aluminium contacts |

|28 |Physical properties of boundary layers in angular contact ball bearings lubricated with greases containing polymers |

|29 |Surface interactions and tribochemistry in boundary lubrication of hypereutectic aluminium–silicon alloys |

2. Tribology International

|Volume 42, Issue 1 (January 2009) |

|1 |The influence of operating condition on acoustic emission (AE) generation during meshing of helical and spur gear |

|2 |Modelling of plowing and shear friction coefficients during high-temperature ball-on-disc tests |

|3 |Thermal modelling of the lemon-bore hydrodynamic bearing |

|4 |Tribological properties of molybdenum disulfide nanosheets by monolayer restacking process as additive in liquid paraffin |

|5 |Scratch and indentation tests on seashells |

|6 |Response surface methodology for eicosanoic acid triboproperties in castor oil |

|7 |Effect of grain refinement and modification on the dry sliding wear behaviour of eutectic Al–Si alloys |

|8 |Effects of scratching directions on AFM-based abrasive abrasion process |

|9 |On the non-linear stability of self-acting gas journal bearings |

|10 |Micropitting performance of nitrided steel gears lubricated with mineral and ester oils |

|11 |Structural analysis of simple base oils under high pressure using synchrotron radiation X-ray diffraction: First trial |

|12 |Cavitation within the framework of reduced description of mixed lubrication |

|13 |Microabrasion–corrosion of cast CoCrMo alloy in simulated body fluids |

|14 |Analysis of gas foil bearings integrating FE top foil models |

|15 |Modification of fretting fatigue behavior of AL7075–T6 alloy by the application of titanium coating using IBED technique and shot |

|16 |Characterizing cavitation erosion particles by analysis of SEM images |

|17 |Surface stresses in coated steel surfaces—influence of a bond layer on surface fracture |

(Back

|S.No. |Index |

|18 |Sliding friction at elastomer/glass contact: Influence of the wetting conditions and instability analysis |

|19 |Diamond particle shape: Its measurement and influence in abrasive wear |

|20 |Experimental and numerical evaluation of contact pressure in pneumatic seals |

|21 |Mechanical and tribological properties of Al–40Zn–Cu alloys |

|22 |Investigation of adhesive and frictional behavior of GeSbTe films with AFM/FFM |

|23 |Frictional testing of wood—Initial studies with a new device |

|Volume 42, Issue 2 (Feburary 2009) |

| |Impact dynamics of rough and surface protected MEMS gears |

| |Mathematical modeling of the thermal relaxation of nominally flat surfaces in contact using fractal geometry: Maxwell type medium |

| |An advanced Park's vectors approach for bearing fault detection |

| |A DOE nano-tribological study of thin amorphous carbon-based films |

| |Tribological behavior of tungsten-doped DLC coating under oil lubrication |

| |The relationship between AE and dissipation energy for fretting wear |

| |Effect of plasma treatment of Kevlar fabric on the tribological behavior of Kevlar fabric/phenolic composites |

| |Real versus synthesized fractal surfaces: Contact mechanics and transport properties |

| |On elastic deformation, inter-asperity cavitation and lubricant thermal effects on flow factors |

| |On the analysis of steady-state sliding wear processes |

| |The effect of surface texturing in soft elasto-hydrodynamic lubrication |

| |Multi-scale enveloping spectrogram for vibration analysis in bearing defect diagnosis |

| |Externally pressurized gas bearings: A comparison between two supply holes configurations |

| |Effects of friction laws on metal forming processes |

| |On the surface and tribological characteristics of burnished cylindrical Al-6061 |

| |Effect of saliva viscosity on tribological behaviour of tooth enamel |

| |Magneto-elastohydrodynamic lubrication of circular contacts at impact loading |

| |Experimental studies on the effects of reduction in gear tooth stiffness and lubricant film thickness in a spur geared system |

| |Friction and wear behavior of thioether hydroxy vegetable oil |

| |Impact dynamics of rough and surface protected MEMS gears |

| |Mathematical modeling of the thermal relaxation of nominally flat surfaces in contact using fractal geometry: Maxwell type medium |

| |An advanced Park's vectors approach for bearing fault detection |

(Back

|S.No. |Index |

| |A DOE nano-tribological study of thin amorphous carbon-based films |

| |Influence of thermal conductivity on wear when machining titanium alloys |

| |A coupled finite element and meshfree analysis of erosive wear |

| |Tribological study of elastomeric bearings for marine propeller shaft system |

|Volume 42, Issue 3 (March 2009) |

| |EDM effects on the thermal properties of 36NiCrMo16 steel |

| |Tribological properties of fluorine-containing additives of silicone oil |

| |The mechanisms of pedestrian slip on flooring contaminated with solid particles |

| |Hydrostatic air foil bearings: Analytical and experimental investigation |

| |Chaos of rub–impact rotor supported by bearings with nonlinear suspension |

| |Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces |

| |Steadily loaded journal bearings: Quasi-3D mass–energy-conserving analysis |

| |Impact of contact size and complex gross–partial slip conditions on Ti–6Al–4V/Ti–6Al–4V fretting wear |

| |An investigation into the effect of train curving on wear and contact stresses of wheel and rail |

| |The effect of temperature on gross slip fretting wear of cold-sprayed nickel coatings on Ti6Al4V interfaces |

| |Performance improvement method for Nylon 6 spur gears |

|Volume 42, Issue 4 (April 2009) |

| |Tribology for engines and transmissions |

| |Modelling the effect of surface roughness on lubrication in all regimes |

| |Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes |

| |The influence of the slide-to-roll ratio on the friction coefficient and film thickness of EHD point contacts under steady state and transient conditions |

| |Behavior of thin viscous boundary films in lubricated contacts between micro-textured surfaces |

| |Improving fuel efficiency with laser surface textured piston rings |

| |Effect of base stocks on the automobile engine bearing |

| |The lubricant-coating interaction in rolling and sliding contacts |

| |Biolubricants and triboreactive materials for automotive applications |

| |Influence of grease composition on rolling contact wear: Experimental study |

| |Effect of electrode potential on the tribocorrosion of tungsten |

| |Application of diamond-like carbon coatings to elastomers frictional surfaces |

(Back

|S.No. |Index |

| |Corrosion-wear behaviour of PVD Cr/CrN multilayer coatings for gear applications |

| |Metal woven wire cloth feeding system for gas bearings |

| |Attenuation of lateral tape motion due to frictional interaction with a cylindrical guide |

|Volume 42, Issue 5 (May 2009) |

| |Attenuation of lateral tape motion due to frictional interaction with a cylindrical guide |

| |Effect of counterpart on the tribological behavior and tribo-induced phase transformation of Si |

| |Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel |

| |Prediction of wear behaviour of A356/SiCp MMCs using neural networks |

| |Analysis of flow field around a ribbed helix lip sea |

| |High temperature friction and wear performances of Ti/Cu-doped carbonaceous mesophases |

| |Dynamic stability experiments of compliant foil thrust bearing with viscoelastic support |

| |Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out characteristics |

| |The influence of current load on fretting of electrical contacts |

| |Friction-induced structural modifications of Mg and Ti surfaces |

| |Increasing nanohardness and reducing friction of nitride steel by laser surface texturing |

| |Belt abrasion resistance and cutting tool studies on new ultra-hard boride materials |

| |Fe thermal analysis of a ceramic clutch |

| |In situ pressure measurements in dimpled elastohydrodynamic sliding contacts by Raman microspectroscopy |

| |Fluid leakage in seals: An approach based on percolation theory |

| |Identification of a friction model—Application to the context of dry cutting of an AISI 1045 annealed steel with a TiN-coated carbide tool |

| |The effects of welding processes on abrasive wear resistance for hardfacing deposits |

| |Direct laser cladding of SiC dispersed AISI 316L stainless steel |

| |Steady state and dynamic characteristics of axial grooved journal bearings |

| |Analysis of conjugate heat transfer and turbulent flow in mechanical seals |

| |Heat transfer correlations for laminar flows within a mechanical seal chamber |

|Volume 42, Issue 6 (June 2009) |

| |Nanoindentation and nanowear study of Sn and Ni–Sn coatings |

| |Tribological properties of Mn–Zn–Fe magnetic fluids under magnetic field |

| |Structural, mechanical and tribological properties of nanostructured CNx/TiN multilayers |

(Back

|S.No. |Index |

| |Incipient damage detection and its propagation monitoring of rolling contact fatigue by acoustic emission |

| |Prevention of fluttering fatigue damage in a tilting pad journal bearing |

| |Mechanical and tribological properties of short-fiber-reinforced SiC composites |

| |Effect of cation on micro/nano-tribological properties of ultra-thin ionic liquid films |

| |Experimental diagnostics of ball bearings using statistical and spectral methods |

| |Analysis of the leakage path in an air-lubricated seal |

| |Isolation and identification of dry bearing faults in induction machine using wavelet transform |

| |EHL squeeze at pin–pulley interface in CVTs: Influence of lubricant rheology |

| |Effect of counterparts on the friction and wear behavior of polyelectrolyte multilayers |

| |Fretting on the cubic face of a single-crystal Ni-base superalloy at room temperature |

| |Corrosion and wear of 6082 aluminum alloy |

| |Physical and tribological properties of PTFE micropowder-filled EPDM rubber |

| |Determination of the real contact area for numerical simulation |

| |Effects of temperature dependent air properties on the performances of a thermal actuated slider |

| |Tribological properties of diamond and SiO2 nanoparticles added in paraffin |

| |Assessing the energy efficiency of gear oils via the FZG test machine |

| |Friction reducing effect of multiply adsorptive organic polymer |

| |Friction and wear behaviour of stainless steel rubbing against copper-impregnated metallized carbon |

| |XPS and XANES characteristics of tribofilms and thermal films generated by two P- and/or S-containing additives in water-based lubricant |

| |The frictional behavior of mild steel under horizontal vibration |

| |Application of influence function method on the fretting wear of tube-to-plate contact |

| |Relationship between wear of friction materials and dissipated power density |

| |Thermal elastohydrodynamic lubrication of starved elliptical contacts |

| |The behavior of the liquid-like Langmuir's adsorbed film on air bearing surfaces |

| |Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis |

| |Evaluation of antioxidants in rapeseed oils for railway application |

| |Thermal wear and electrical sliding wear behaviors of the polyimide modified polymer-matrix pantograph contact strip |

| |Tribological compatibility and improvement of machining productivity and surface integrity |

(Back

3. Tribology Letters

|S.No. |Index |

| |Surface topography and tribology of cast iron in boundary lubrication |

| Volume 33, Number 1(January, 2009) |

| |A Novel Method for Quantitative Determination of Ultra-low Wear Rates of Materials, Part II: Effects of Surface Roughness and Roughness Orientation on Wear |

| |Anisotropic Wear Resistance of Human Mandible Cortical Bone |

| |Boundary Effect on Particle Motion in the Head Disk Interface |

| |Deactivation Effect of Tricresyl Phosphate (TCP) on Tribochemical Decomposition of Hydrocarbon Oil on a Nascent Steel Surface |

| |Determination of the Friction Coefficient During Glass Polishing |

| |Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus Ta2AlC/Ag or Cr2AlC/Ag Composites |

| |Molecular Dynamics Simulation of Rolling Friction Using Nanosize Spheres |

| |Relation Between Inter-Particle Distance (LIPD) and Abrasion in Multiphase Matrix–Carbide Materials |

| |Wear Mechanisms in Galling: Cold Work Tool Materials Sliding Against High-strength Carbon Steel Sheets |

| Volume 33, Number 2 (February, 2009) |

| |A Novel Method for Quantitative Determination of Ultra-low Wear Rates of Materials, Part I: On Steels |

| |An Experimental Validation of the Recently Discovered Scale Effect in Generalized Newtonian EHL |

| |Correlation Between Tribological Parameters and Wear Mechanisms of Homogeneous and Heterogeneous Material |

| |End-grafted Sugar Chains as Aqueous Lubricant Additives: Synthesis and Macrotribological Tests of Poly(l -lysine)- graft -Dextran (PLL- g -dex) Copolymers |

| |Ionic Liquids as Lubricants of Titanium–Steel Contact |

| |Rolling–Sliding Laboratory Tests of Friction Modifiers in Leaf Contaminated Wheel–Rail Contacts |

| |The Role of Configuration Entropy in Boundary Lubricants Based on the n -Perfluoropropylene Oxide Main Chain Structure |

| Volume 33, Number 3 (March, 2009) |

| |Air Bearing Simulation for Bit Patterned Media |

| |Effect of Contact Stiffness on Creep-Groan Occurrence on a Simple Caliper-Slider Experimental Model |

(Back

|S.No. |Index |

| |Inert Gas Filled Head–Disk Interface for Future Extremely High Density Magnetic Recording |

| |Interferometry Measurement of Spin Effect on Sliding EHL |

| |Sliding Tribological Characteristics of a Zr-based Bulk Metallic Glass Near the Glass Transition Temperature |

| |Study on the Synthesis and Tribological Property of Fe3O4 Based Magnetic Fluids |

| |Tribocorrosion of Diamond-Like Carbon Deposited on Ti6Al4V |

| |Tribological Behaviour of Structural Si-Based Ceramics in Fretting Tests at Room Temperature |

|Volume 34, Number 1 (April, 2009) |

| |Anomalous Low Friction Under Boundary Lubrication of Steel Surfaces by Polyols |

| |Effects of Self-Assembled Monolayer and PFPE Lubricant on Wear Characteristics of Flat Silicon Tips |

| |Effects of Tail Group and Chain Length on the Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum |

| |Embedding Wear Models into Friction Models |

| |Nanofretting Behavior of Monocrystalline Silicon (100) Against SiO2 Microsphere in Vacuum |

| |Nanoscale Tribology, Energy Dissipation and Failure Mechanisms of Nano- and Micro-silica Particle-filled Polymer Composites |

| |Speed and Atmosphere Influences on Nanotribological Properties of NbSe2 |

| |Tribological Properties of Fluorinated Carbon Nanofibres |

|Volume 34, Number 2 (May, 2009) |

| |Effect of Tribofilm Formation on the Dry Sliding Friction and Wear Properties of Magnetron Sputtered TiAlCrYN Coatings |

| |Fabrication, Characterisation and Tribological Investigation of Artificial Skin Surface Lipid Films |

| |Investigation of an Approach to Balance Wear Resistance and Mechanical Properties of Crosslinked UHMWPE |

| |Molecular Orientation, Crystallinity, and Topographical Changes in Sliding and their Frictional Effects for UHMWPE Film |

| |Occurrence of Wall Slip in Elastohydrodynamic Lubrication Contacts |

| |Synthesis of Fluorinated ZDDP Compounds |

| |Tribological Characteristics of Alkylimidazolium Diethyl Phosphates Ionic Liquids as Lubricants for Steel–Steel Contact |

(Back

|S.No. |Index |

|Volume 34, Number 3 (June, 2009) |

| |Aqueous Lubrication of SiC and Si3N4 Ceramics Aided by a Brush-like Copolymer Additive, Poly(l -lysine)- graft -poly(ethylene glycol |

| |Dry-sliding Tribological Properties of Nano-Eutectic Fe83B17 Alloy |

| |High Temperature Tribological Characteristics of Fe–Mo-based Self-Lubricating Composites |

| |Microstructure and Wear Properties of In Situ Synthesized VC Carbide Reinforced Fe-based Surface Composite Coating Produced by Laser Cladding |

| |Tribochemistry of a Ti Alloy Under Fretting in Air: Evidence of Titanium Nitride Formation |

| |Tribocorrosion of Diamond-Like Carbon Deposited on Ti6Al4V |

| |Tribological Performance of Alternating-Layered Si-DLC/DLC Films Under Humid Conditions |

| |Wear Mechanisms at High Temperatures. Part 1: Wear Mechanisms of Different Fe-Based Alloys at Elevated Temperatures |

| |Wear Mechanisms at High Temperatures: Part 2: Temperature Effect on Wear Mechanisms in the Erosion Test |

Tribology Transactions

|Volume 52 Issue 1 2009 |

| |Self-Adapting Microscale Surface Grooves for Hydrodynamic Lubrication |

| |Influence of Critical Micelle Concentration (CMC) on Tribological Properties of Aqueous Solutions of Alkyl Polyglucosides |

| |Effect of Surface Texturing on Very Thin Film EHD Lubricated Contacts |

| |Durable Anti-Smudge Materials for Display Terminals |

| |A Dynamic Model for Dissipative Structures used in Bump-Type Foil Bearings |

| |Design and Development of a Test Setup for Online Wear Monitoring of Mechanical Face Seals Using a Torque Sensor |

| |Effect of Aramid Fiber and ZnO Nanoparticles on Friction and Wear of PTFE Composites in Dry and LN2 Conditions |

| |CFD Study on Oil-in-Water Emulsions |

| |Antiwear Properties of Blends Containing Mixtures of Zinc Dialkyl Dithiophosphate and Different Detergents |

| |Numerical Analysis on Lubricating Properties of Tripod Sliding Universal Joints |

(Back

|S.No. |Index |

| |Pretreatment of Steel Racetracks by using a Sand-Blasting Technique with a Special Emphasis on Si3N4 Powder—Part One |

| |Traction of Lubricated Rolling Contacts between Thin-Film Coatings and Steel |

| |Bearing Fatigue Life Tests in Advanced Base Oil and Grease for Space Applications |

| |Influence of Material Nature and Surface Texturing on Wear of Heavy-Duty Diesel Engine Cylinder Liners |

| |Frictional Torque of Needle Roller Thrust Bearings |

| |Frictional Performances of Activated Carbon and Carbon Blacks as Lubricant Additives |

|Volume 52 Issue 2 2009 |

| |Influence of Leak Path Friction on Labyrinth Seal Inlet Swirl |

| |The Dynamic Performance Analysis of Foil Journal Bearings Considering Coulomb Friction: Rotating Unbalance Response |

| |Investigation of Electrical Contact Resistance of Ag Nanoparticles as Additives Added to PEG 300 |

| |U.S. Air Force Perfluoropolyalkylether Experiences |

| |First Traction Results of High Spinning Large-Size Circular EHD Contacts from a New Test Rig: Tribogyr |

| |Root Cause Failure Analysis of Outer Ring Fracture of Four-Row Cylindrical Roller Bearing |

| |Tribology Passive Protection of Friction Pair with Polystyrene |

| |Study on the Scratch Hardness and Indentation Hardness of Burnished Poly(Oxymethylene) Surfaces |

| |Performance of Flat Capillary Compensated Deep/Shallow Pockets Hydrostatic/Hydrodynamic Journal-Thrust Floating Ring Bearing |

| |Wear Behavior of AISI 8620 Steel Modified by a Pulse-Plasma Technique |

| |Evaluating the Validity of Rolling Contact Fatigue Test Results |

| |Assessment of Tribological Coatings for Foil Bearing Applications |

| |A Simple Approach to the ThermoElastoHydroDynamic Behavior of Mechanical Face Seals |

| |CMP Friction as a Function of Slurry Silica Nanoparticle Concentration and Diameter |

| |The Static and Dynamic Characteristics of a Two-Lobe Journal Bearing Lubricated with Couple-Stress Fluid |

| |Dimensional Stability, Microstructure, and Cohesion Strength of Composite Solid Lubricant Coatings after Heat Treatment : Author: Malcolm K. Stanford a |

|Volume 52 Issue 3 2009 |

| |Antiwear Properties and Tribochemical Action Mechanisms of Three S-Containing Triazine Derivatives as Additives in Rapeseed Oil |

| |Atomic Layer Deposition of Tungsten Disulphide Solid Lubricant Nanocomposite Coatings on Rolling Element Bearings |

(Back

|S.No. |Index |

| |Experimental Study on the Performance of Coated Carbide Tools in the Ultra-Precision Machining of Stainless Steel |

| |Identification of Bearing and Gear Tooth Damage in a Transmission System |

| |On the Temperature Rise of Bodies Subjected to Unidirectional or Oscillating Frictional Heating and Surface Convective Cooling |

| |Limits of Dynamic Coefficients of Self-Acting Tilting-Pad Gas Bearings |

| |Friction and Wear Properties of Aluminum-Silicon Alloy Impregnated Graphite Composite (ALGR-MMC) under Lubricated Sliding Conditions |

| |Prediction of Contact Temperature Distribution during Fretting Fatigue in Titanium Alloys |

| |The Tribological Properties of Fullerene-Like Hydrogenated Carbon (FL-C:H) Film under Different Humidity Conditions |

| |Friction in Highly Loaded Mixed Lubricated Point Contacts |

| |Feasibility Study of Vapor-Mist Phase Reaction Lubrication using a Thioether Liquid |

| |Aerostatic and Aerodynamic Performance of an Out-Pump Spirally Grooved Thrust Bearing: Analysis and Comparisons to Static Load Experiments |

| |Tribological Properties of Electric Arc-Sprayed CuSn Coating for Bearing Elements |

| |High Productivity Rough Turning of Ti-6Al-4V Alloy, with Flood and High-Pressure Cooling |

| |Erosion Wear Analysis of Plasma Sprayed Ceramic Coating Using the Taguchi Technique |

| |Enhancing Oil/Water Emulsion Stability: The Use of Capillary Contact Angle Measurements to Determine Liquid/Liquid Interfacial Tensions between Aqueous Alkanolamine Solutions |

| |and Oils |

|Volume 52 Issue 4 2009 |

| |Interference-Fit Life Factors for Roller Bearings |

| |Measurement and Analysis of Inlet Oil Film Thickness in Cold Sheet Rolling with Oil-in-Water Emulsion |

| |Structural Properties of Foil Bearings: A Closed-Form Solution Validated with Finite Element Analysiss |

| |Investigation of Chemical/Mechanical Polishing of Niobium |

| |Tribological Properties of a Magnetorheological (MR) Fluid in a Finishing Process |

| |A Review on Grease Lubrication in Rolling Bearings |

| |Tribological Characteristics of WC-Ni and WC-Co Cemented Carbide in Dry Reciprocating Sliding Contact |

| |Effect of Perfluoropolyether Fluids on Life of Thrust Ball Bearings |

| |Correlation between the Film Forming Ability and Rheological Properties of New and Aged Low Sulfated Ash, Phosphorus and Sulfur (Low SAPS) Automotive Lubricants |

(Back

|S.No. |Index |

| |The Role of Antioxidants on the Oxidation Stability of Oils with F-ZDDP and ZDDP, and Chemical Structure of Tribofilms Using XANES |

| |The Effect of a Friction Modifier Additive on Micropitting |

| |A Study of the Steady-State Performance of a Pressurized Air Wave Bearing at Concentric Position |

Wear

|Volume 266, Issues 1-2 (5 January 2009) |

| |Adhesive wear of stir cast hypereutectic Al–Si–Mg alloy under reciprocating sliding conditions |

| |Wear of aligned silicon nitride under dry sliding conditions |

| |Wear mechanisms and scale effects in two-body abrasion |

| |Two-body dry abrasive wear of cermets |

| |Wear behaviors of ceramic nozzles with laminated structure at their entry |

| |Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method |

| |Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method |

| |A procedure for the wear prediction of collector strip and contact wire in pantograph–catenary system |

| |Wear behaviour of dental enamel at the nanoscale with a sharp and blunt indenter tip |

| |Inelastic damages by stress wave on steel surface at the incubation stage of vibration cavitation erosion |

| |Scratch testing of metals and polymers: Experiments and numerics |

| |Influence of electrical discharge machining on the reciprocating sliding wear response of WC-Co cemented carbides |

| |Mechanical and unlubricated tribological properties of titanium-containing diamond-like carbon coatings |

| |Role of surface texture of harder surface on subsurface deformation |

| |Formation mechanism of electrical damage on sliding lubricated contacts for steel pair under DC electric field |

| |Analysis of interface temperature, forward slip and lubricant influence on friction and wear in cold rolling |

| |Rapid tyre/road separation: An experimental study of adherence forces and noise generation |

| |Effect of functionally graded material on frictionally excited thermoelastic instability |

| |Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions |

| |Reciprocating friction and wear behavior of Ti3AlC2 and Ti3AlC2/Al2O3 composites against AISI52100 bearing steel |

(Back

|S.No. |Index |

| |Triboactive materials for dry reciprocating sliding motion at ultra-high frequency |

| |Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds |

| |Solid particle erosion studies on polyphenylene sulfide composites and prediction on erosion data using artificial neural networks |

| |Comparative study on rod fretting behavior of different spacer spring geometries |

| |Tribological study of peroxide-cured EPDM rubber filled with electron beam irradiated PTFE powder |

| |Simulation of cylinder ‘zero-wear’ process |

| |Sliding wear of silicon carbide modified by etching with chlorine at various temperatures |

| |Two-body abrasive behaviour of untreated SC and R-G fibres polyester composites |

| |Tribological study of novel S–N style 1,3,4-thiadiazole-2-thione derivatives in rapeseed oil |

| |Tribological properties of Si-containing diamond-like carbon film under ATF lubricated condition |

| |Comparison of tribological behavior of nylon composites filled with zinc oxide particles and whiskers |

| |Dry wear of NiAl3-reinforced mechanically alloyed aluminium with different microstructure |

| |Analysis of load-speed sensitivity of friction composites based on various synthetic graphites |

| |On the dry and wet sliding performance of potentially new frictional brake pad materials for automotive industry |

| |Rubber abrasion at steady state |

| |Influence of varied cryotreatment on the wear behavior of AISI D2 steel |

| |Analysis based on microcontact mechanism for the roughness dependent stick–slip motion |

| |Transient rolling of cylindrical contacts with constant and linearly increasing applied slip |

| |Triboelectrochemical behaviour of a Si3N4–TiN ceramic composite and a titanium alloy commonly used in biomedical applications |

| |Correlation of the tribological behaviors with the mechanical properties of poly-ether-ether-ketones (PEEKs) with different molecular weights and their fiber filled composites |

| |Cavitation damages on solid surfaces in suspensions containing spherical and irregular microparticles |

| |Nanometer size wear debris generated from ultra high molecular weight polyethylene in vivo |

| |Wear behavior of AA1060 reinforced with alumina under different loads |

| |Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and counterface |

|Volume 266, Issues 3-4 (5 February 2009) |

| |Surface modifications in tribological contacts |

| |Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings |

| |Comparative study of the tribological behavior of self-lubricating W–S–C and Mo–Se–C sputtered coatings |

(Back

|S.No. |Index |

| |Mechanical and tribological properties of sputtered Mo–Se–C coatings |

| |Tribocorrosion behaviour of Ni–SiC nano-structured composite coatings obtained by electrodeposition |

| |Comparison of self-mated hardmetal coatings under dry sliding conditions up to 600 °C |

| |Characterisation of ZrO2 layers deposited on Al2O3 coating |

| |The role of tribology and metrology in the latest development of bio-materials |

| |Tribo-energetic correlation of tool thermal properties to wear of WC-Co inserts in high speed dry machining of aeronautical grade titanium alloys |

| |On the wear of PVD-coated HSS hobs in dry gear cutting |

| |A PACVD duplex coating for hot-forging applications |

| |Minimised gear lubrication by a minimum oil/air flow rate |

| |Influence of surface treatment of elastomers on their frictional behaviour in sliding contact |

| |Analytical approach for wear prediction of metallic and ceramic materials in tribological applications |

| |Influence of surface preparation on roughness parameters, friction and wear |

|Volume 266, Issues 5-6 (15 March 2009) |

| |The 11th International Conference on Metrology and Properties of Engineering Surfaces |

| |Comparing laser and polychromatic confocal optical displacement sensors for the 3D measurement of cylindrical artefacts containing microscopic grooved structures |

| |Advances in thick and thin film analysis using interferometry |

| |Form error analysis of mould insert for large angle lens with ICP algorithm |

| |Quality assurance —Have we specified it the wrong way round |

| |Automated bullet-identification system based on surface topography techniques |

| |Identification of the paint process for steel sheet applications |

| |Capturing local and anisotropic behaviour in surface topography |

| |Lead characterisation by an objective evaluation method |

| |A new wavelet filtering for analysis of fractal engineering surfaces A new free-form surface fitting method for precision coordinate metrology |

| |Development of a new traceable areal surface texture measuring instrument |

| |Dynamic modelling of the fidelity of random surface measurement by the stylus method |

| |A new look at surface metrology |

| |Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement |

| |The evolution of surface topography of injection cams |

(Back

|S.No. |Index |

| |Evolution of road-surface skid-resistance and texture due to polishing |

| |New criterion of grain size choice for optimal surface texture and tolerance in belt finishing production |

| |Development of functional surface by nano-plastic forming |

| |The influence of surface topography on the photocatalytic activity of electrophoretically deposited titanium dioxide thin films |

| |Effect of roughness scale on contact stiffness between solids |

| |On the influence of surface roughness on real area of contact in normal, dry, friction free, rough contact by using a neural network |

| |Study of hair topography modification by interferometry |

| |Geometrics of tooth wea |

| |Scale-based correlations of relative areas with fracture of chocolate |

|Volume 266, Issues 7-8 (25 March 2009) |

| |The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V |

| |On the behaviour of obsidian under scratch test |

| |Effect of Ag nanoparticles additive on the tribological behavior of multialkylated cyclopentanes (MACs) |

| |A comparative investigation of the wear behavior of PTFE and PI under dry sliding and simulated sand-dust conditions |

| |Tribology of polymer injection-molded stainless steel hybrid gear |

| |Novel polytetrafluoroethylene (PTFE) composites with newly developed Tribaloy alloy additive for sliding bearings |

| |Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites |

| |Sliding wear-induced microstructure evolution of nanocrystalline and coarse-grained AZ91D Mg alloy |

| |Rolling contact fatigue life of AISI 52100 steel balls with mineral and synthetic polyester lubricants with PTFE nanoparticle powder as an additive |

| |Temperature as sensitive monitor for efficiency of work in abrasive flow machining |

| |Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process |

| |Friction properties of nano-hydroxyapatite reinforced poly(vinyl alcohol) gel composites as an articular cartilage |

| |Synergy between tribo-oxidation and strain rate response on governing the dry sliding wear behavior of titanium |

| |The preparation of PVDF/clay nanocomposites and the investigation of their tribological properties |

| |A method for obtaining the temperature distribution at the interface of sliding bodies |

| |Friction and wear properties of short carbon fiber reinforced aluminum matrix composites |

| |Wear mechanism of multiphase friction materials with different phenolic resin matrices |

(Back

|S.No. |Index |

| |Morphologies of the wear debris of polyetheretherketone produced under dry sliding conditions: Correlation with wear mechanisms |

| |Wear mechanisms in materials with granitic textures—Applicability of a lateral crack system model |

| |Temperature and division of heat in a pin-on-disc frictional device—Exact analytical solution |

| |Tribological and hydrothermal behaviour of silicon carbide under water lubrication |

| |Using abrasives to remove a toner-print so that office paper might be reused |

| |Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at long dry sliding |

| |Cavitation resistance of Cr–N coatings deposited on austenitic stainless steel at various temperatures |

| |The effect of hydrogen on friction and wear of Ni–P electroless coating |

| |Scratch and normal hardness characteristics of polyamide 6/nano-clay composite |

| |Numerical integration schemes and parallel computation for wear prediction using finite element method |

| |Duplex SiCN/DLC coating as a solution to improve fretting—Corrosion resistance of steel |

| |An integrated material removal model for silicon dioxide layers in chemical mechanical polishing processes |

| |A representative ex-situ fretting wear investigation of orthodontic arch-wire/bracket contacts |

| |An investigation of friction and wear performances of bonded molybdenum disulfide solid film lubricants in fretting conditions |

| |Sliding wear behaviour of T6 treated A356–TiB2 in-situ composites |

| |Friction behavior of lubricated zinc phosphate coatings |

| |Tribological studies of polymer based ceramic–metal composites processed at ambient temperature |

| |A ring area formed around the erosion pit on 1Cr18Ni9Ti stainless steel surface in incipient cavitation erosion |

| |Friction in a hydraulic motor piston/cam roller contact lined with PTFE impregnated cloth |

|Volume 266, Issues 9-10 (24 April 2009) |

| |Tribological properties of polymer-sheet-adhered metal hybrid gear |

| |Wear transitions in a wear coefficient model |

| |Wear resistance of annealed plain carbon steels in pre-strained condition |

| |Wear resistance of annealed plain carbon steels in pre-strained condition Pages 917-924 |

| |Short-pitch rail corrugation: A possible resonance-free regime as a step forward to explain the “enigma”? |

| |Time dependant measurements of cavitation damage |

| |Tribological interaction between multi-walled carbon nanotubes and silica surface using lateral force microscopy |

| |Tribological properties of γ-Y2Si2O7 ceramic against AISI 52100 steel and Si3N4 ceramic counterparts |

(Back

|S.No. |Index |

| |Modelling the erosion rate in micro abrasive air jet machining of glasses |

| |Erosion wear behavior of laser clad surfaces of low carbon austenitic steel |

| |Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with focused ion beam and transmission electron microscopy |

| |Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with focused ion beam and transmission electron microscopy |

| |Microstructural modeling of adaptive nanocomposite coatings for durability and wear |

| |Third body effects in the wear of polyamide: Micro-mechanisms and wear particles analysis |

| |Wear development on wiper Al2O3–TiC mixed ceramic tools in hard machining of high strength steel |

| |An investigation into the effect of film thickness on nanowear with amorphous carbon-based coatings |

| |Impact of die wear and punch surface textures on aluminium can wall |

|Volume 266, Issues 11-12 (30 May 2009) |

| |Sliding wear behaviors of in situ alumina/aluminum titanate ceramic composites |

| |Evaluation of braze bonded hard complex boride based coatings for sliding, erosion and abrasion wear |

| |Particle size effects on the slurry erosion of aluminium alloy (AA 6063) |

| |Sliding friction and wear of Cu–graphite against 2024, AZ91D and Ti6Al4V at different speeds |

| |Effect of transfer layer on dry sliding wear behaviour of cast Al-based composites synthesized by addition of TiO2 and MoO3 |

| |An erosion-based model for abrasive waterjet turning of ductile materials |

| |Alternation on rolling contact properties of steel due to magnetic field |

| |Studies on wear behavior of nano-intermetallic reinforced Al-base amorphous/nanocrystalline matrix in situ composite |

| |Indirect monitoring of the dynamics at the contact interfaces of a pair of abrading titanium specimens |

| |Effect of reinforcement coatings on the dry sliding wear behaviour of aluminium/SiC particles/carbon fibres hybrid composites |

| |The effects of nickel and carbon concentrations on the wear resistance of Fe–Ni–C austenitic alloys |

| |Frictional and adhesive behavior of organic–inorganic hybrid coatings on surgical grade stainless steel using nano-scratching technique |

| |Microstructure and wear resistance of low temperature hot pressed TiB2 |

| |Effect of counter materials on coefficients of friction of TiN coatings with preferred grain orientations |

| |Thermo-mechanical analysis of the magnetic head–disk interface with a fractal surface description |

(Back

|S. No. |Index |

| |Tribological properties of MoS2 nano-balls as filler in polyoxymethylene-based composite layer of three-layer self-lubrication bearing materials |

| |Fretting wear behaviors of nanometer Al2O3 and SiO2 reinforced PEEK composites |

| |Techniques for assessment of wear between human cartilage surfaces |

| |Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts |

| |Reduction of erosion rate by particle size distribution (PSD) modification of hematite as weighting agent for oil based drilling fluids |

| |Microstructural characterization of the tool–chip interface enabled by focused ion beam and analytical electron microscopy |

| |Dry sliding wear behaviour of plasma electrolytic oxidation coated AZ91 cast magnesium alloy |

6. Indian Journal of Tribology

|Volume 4, No. 1, January-June-2009 |

| |Effect of running-in wear on the performance characteristics of a hydrodynamic journal bearing system |

| |Effect of shot peening on the abrasive wear behaviour of medium carbon steels |

| |A comparative study on condition monitoring of rolling element bearings |

| |Effects of substrate surface finish on tribological performance and surface topology of Hi-HVOF sprayed WC-Cr-Ni cermet coating |

| |Reduction in wear rate of rolls using roll bite lubrication is hot strip mill |

| |Constant flow valve compensated hole-enty hybrid journal bearing lubricated with ER fluid |

7. Journal Lubrication Science(From 2009 Journal of Synthetic Lubrication and Tribotest will be also incorporated in this Journal)

|Volume 21 Issue 1 , January 2009 |

| |Optimum shape design for surface of a porous slider bearing lubricated with couple stress fluid |

| |Analysis of the pour point of coconut oil as a lubricant base stock using differential scanning calorimetry  |

| |Experimental model for creep groan analysis  |

|Volume 21 Issue 2 , February 2009 |

| |Development of a test device for the evaluation of fretting in point contact  |

| |A methodology for the assessment of the tribocorrosion of passivating metallic materials  |

(Back

|S. No. |Index |

| |Nano Si3N4 composites with improved tribological properties  |

|Volume 21 Issue 3 , March 2009 |

| |Contact size effect on fretting wear behaviour: application to an AISI 52100/AISI 52100 interface  |

| |Chemical structure of phosphazenes in relation to the tribological properties of a steel-on-steel system  |

| |Tribological performances of heterocyclic-containing ether and/or thioether as additives in the synthetic diester  |

|Volume 21 Issue 4 , April 2009 |

| |Effect of contact configuration on the durability and friction coefficient of pressure-sprayed MoS2 coatings under fretting conditions |

| |Initial exploration of tribological performance of novel triazine derivatives in water  |

| |Feasibility of using digital speckle correlation in the study of seal contacts |

| |New synthetic esters with a complex structure considered as tribological fluids |

8. Journal of Tribology

|Volume 131, Number 1, January 2009 |

| |Using Design of Experiments to Analyze the Connecting Rod Big-End Bearing Behavior |

| |Dynamic Analysis of Cage Stress in Tapered Roller Bearings Using Component-Mode-Synthesis Method |

| |Friction Measurement in the Biaxial Rocking Motion Hip Joint Simulator |

| |Evaluation of DLC Coatings for High-Temperature Foil Bearing Applications |

| |Elastic-Plastic Wheel-Rail Thermal Contact on Corrugated Rails During Wheel Braking |

| |On a Simplified Model for Numerical Simulation of Wear During Dry Rolling Contacts |

| |Plastic Yield Conditions for Adhesive Contacts Between a Rigid Sphere and an Elastic Half-Space |

| |Experimental Study of a Creeping Polymer Sphere in Contact With a Rigid Flat |

| |A Three-Dimensional Deterministic Model for Rough Surface Line-Contact EHL Problems |

| |Ultrasonic Measurement of Rolling Bearing Lubrication Using Piezoelectric Thin Films |

| |Traction in EHL Line Contacts Using Free-Volume Pressure-Viscosity Relationship With Thermal and |

| |Shear-Thinning Effects |

| |Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of |

| |Cobalt-Based Alloys |

| |H. Yu, R. Ahmed, H. de Villiers Lovelock, and S. Davies |

| |Static and Dynamic Characteristics of Oil Lubricated Beveled-Step Herringbone-Grooved Journal Bearings |

(Back

|S. No. |Index |

| |Numerical Approach for Solving Reynolds Equation With JFO Boundary Conditions Incorporating ALE |

| |Techniques |

| |Analysis on Dynamic Performance of Hydrodynamic Tilting-Pad Gas Bearings Using Partial Derivative |

| |Method |

| |A Bubble Dynamics Based Approach to the Simulation of Cavitation in Lubricated Contacts |

| |Experimental Study on the Stabilization of Small-Bore Journal Bearings by Controlling Starved Lubrication |

| |and Bearing Orientation Angle |

| |The Tribological Study of Novel Benzotriazolyl-Containing Anticorrosive Polysulfides in Rapeseed Oil |

| |Full EHL Simulations Using the Actual Ree–Eyring Model for Shear-Thinning Lubricants |

| |Loading Velocity Effect in the Load/Unload Systems With Multiple Flying Height States |

| |Analytical and Experimental Elastic-Plastic Impact Analysis of a Magnetic Storage Head-Disk Interface |

| |Measurement and Sources of Lateral Tape Motion: A Review |

| |Stress Induced Permanent Magnetic Signal Degradation of Perpendicular Magnetic Recording System |

| |Direct Simulation Monte Carlo Method for the Simulation of Rarefied Gas Flow in Discrete Track Recording |

| |Head/Disk Interfaces |

| |A Particle-Augmented Mixed Lubrication Modeling Approach to Predicting Chemical Mechanical Polishing |

| |Friction and Wear Behavior of Graphite-Carbon Short Fiber Reinforced Al–17%Si Alloy Hybrid Composites |

| |Lubrication and Surface Properties of Roach Cuticle |

|Volume 131, Number 2, April 2009 |

| |Rotordynamic Performance of Flexure Pivot Tilting Pad Gas Bearings With Vibration Damper |

| |A Discrete Element Approach for Modeling Cage Flexibility in Ball Bearing Dynamics Simulations |

| |Analysis of Multirecess Hydrostatic Journal Bearing Operating With Micropolar Lubricant |

| |Effect of Coating Thickness on the Friction Coefficients and Torque-Tension Relationship in Threaded Fasteners |

| |Frictional Energy Dissipation in a Rough Hertzian Contact |

| |A Numerical Static Friction Model for Spherical Contacts of Rough Surfaces, Influence of Load, Material, and Roughness |

| |Static Friction Model of Elastic-Plastic Contact Behavior of Surface With Elliptical Asperities |

| |The Effect of Surface Roughness on Static Friction and Junction Growth of an Elastic-Plastic Spherical Contact |

| |Multiple Contacts of Similar Elastic Materials |

(Back

|S. No. |Index |

| |Transient Thermomechanical Analysis of Sliding Electrical Contacts of Elastoplastic Bodies, Thermal Softening, and Melting Inception |

| |Creep Relaxation of an Elastic–Perfectly Plastic Hemisphere in Fully Plastic Contact |

| |Three-Dimensional Semiperiodic Line Contact–Periodic in Contact Length Direction |

| |A Multilevel Model for Elastic-Plastic Contact Between a Sphere and a Flat Rough Surface |

| |Asperity Creep Measured by the Reflection of Ultrasound at Rough Surface Contact |

| |Soft EHL Simulations of U-Cup and Step Hydraulic Rod Seals |

| |Experimental and Numerical Study of Air Entrainment Between Web and Spirally Grooved Roller |

| |The Validity of Linear Elasticity in Analyzing Surface Texturing Effect for Elastohydrodynamic Lubrication |

| |Thermomechanical Coupling in Oscillatory Systems With Application to Journal Bearing Seizure |

| |Steady State Performance Characteristics of Single Pad Externally Adjustable Fluid Film Bearing in the Laminar and Turbulent Regimes |

| |Thermohydrodynamic Study of Multiwound Foil Bearing Using Lobatto Point Quadrature |

| |Application of the Amplitude Reduction Technique Within Probabilistic Rough EHL Models |

| |Analysis of a Porous Elastic Sheet Damper With a Magnetic Fluid |

| |A Numerical Simulation Method to Evaluate the Static and Dynamic Characteristics of Flying Head Sliders on Patterned Disk Surfaces |

| |A Simplified Dynamic Model for the Analysis of the Slider Off-Track Motion Due to Head-Disk Interactions |

| |High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock |

| |Study on Contact Characteristic of Nanoscale Asperities by Using Molecular Dynamics Simulations |

| |Load-Independent Spin Power Losses of a Spur Gear Pair: Model Formulation |

| |Oil Churning Power Losses of a Gear Pair: Experiments and Model Validation |

| |A Voronoi Finite Element Study of Fatigue Life Scatter in Rolling Contacts |

| |Evaluation of Rayleigh–Plesset Equation Based Cavitation Models for Squeeze Film Dampers |

| |Partial Contact of an Elastic Coated Cylinder Pressed by a Rigid Flat Surface |

| |Prediction of Steady State Adhesive Wear in Spur Gears Using the EHL Load Sharing Concept |

| |An Adhesion Model for Elastic-Contacting Fractal Surfaces in the Presence of Meniscus |

(Back

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download